2
One Button. Ten Seconds. Precision Toolholding. With the press of a button, use nine tons of force – and no chemical fumes or high temperatures – to keep your tool securely in place for less than three microns TIR, every time, for 20,000 cycles or five years. That’s the powRgrip promise, and with the new Automatic Sales Options, REGO-FIX is proud to offer a variety of new ways to purchase the powRgrip Automatic Press with everything you need for safe and precise toolholding. ≤3μm safeRgrip TIR of <0.0001” (3 µm) and length adjustment repeatability <0.0004” (10 µm) ensure the utmost in precision and process security. 10 sec fastRgrip With the PGU Automatic Press, every clamping operation takes less than 10 seconds, freeing operators to add value elsewhere in production. tightRgrip Interrupted surfaces at the toolholder-to-collet and collet- to-tool-shank interfaces provide exceptional vibration damping. coolRgrip With powRgrip’s Swiss precision and intelligent die technology, you can stop exposing operators to super-heated shrink-fit holders and other risky toolholding systems. >20,000x Maximum clamping force strongRgrip powRgrip’s precision-engineered tapered collets provide the highest transferable torque in the industry, even after five years or 20,000 cycles – guaranteed. smartRgrip No setting of parameters required – the system applies the correct pressure for a given collet every time with the inserted clamping insert.
