+ All Categories
Home > Documents > €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw...

€¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw...

Date post: 07-May-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
10
Transcript
Page 1: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral
Page 2: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral
Page 3: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral
Page 4: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral
Page 5: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral
Page 6: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral
Page 7: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral
Page 8: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral
Page 9: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral
Page 10: €¦ · one screw terminal on the switch (4). Attach the hot supply lead to the other screw terminal on the switch. Attach the white jumper wire from the cooler to the white or neutral

Recommended