OneSteel Valve Product Catalogue

VALVEPRODUCTPROFILE

GLOBAL RESOURCESPartnering Leading World Manufacturers

LOCAL SOLUTIONSIn Valves and Actuation

NORGREN

BONNEY FORGE

KITZ SAUNDERS

EMICO SRI

VAAS

TURNFLO UNICOM

DeZURIK

WATTS

VICTAULIC CRANE LCM CHEROFLOW

ITAG SCORE BOHMER

BETTIS SHAFER EL-O-MATIC

BURKERT ASCO ROTORK

LUCIFER HK CONTROMATIC

¨

NEWAY

AUDCO

Onesteel Trading Limited ABN 50 007 519 646Valves & Actuation National Office:

Phone (03) 8795 2331 Fax (03) 9702 7508www.onesteel.comDo

c Re

f 066

Dec

05

desi

gn s

yste

ms

/ mel

bour

ne

QUALITY ISO 9001 / ISO 9002

PRICE HIGHLY COMPETITIVE

TECHNICAL EXPERTISE DEDICATED TEAMS IN ALL BRANCHES

AVAILABILITY 24 HOUR SHIPMENT / ON TIME DELIVERY

ASSISTANCE 24 HOURS / 7 DAYS A WEEK

SERVICE WE ARE COMMITTED TO MEETING YOUR NEEDS

WE OFFER:

For information on Onesteel’s actuation program,please refer to Actuation Product Profile (Doc Ref 076)

Onesteel has taken reasonable care to ensure accuracy of the material in this ‘Product Profile’ but you should not rely on the whole or any partof the information which is subject to change without notice for reasons including error rectification, product discontinuation and new productintroduction. OneSteel expressly disclaims all liability whatsoever for (including any direct or indirect loss or damage, costs or expenseshowsoever incurred by any person) or reliance on the whole or any part of the information contained in or omitted from this ‘Product Profile’ andrecommends that you verify any information with your independent expert adviser and rely solely on that adviser’s recommendations.


LOCAL SOLUTIONS In Valve Actuation

��

��C O N T E N T S

• Pages 2-5 Ball Valves (Kitz)• Page 5 Ball Valves (ITAG)• Pages 6-7 Ball Valves (SRI)• Pages 8-9 Ball Valves (Emico)• Page 10 Ball Valves (LCM Cheroflow)• Page 11 Ball Valves (Bohmer / Kitz / ITAG)• Pages 12-13 Cast Steel Gate, Globe & Check Valves (Kitz)• Pages 14-15 Cast Steel Gate, Globe & Check Valves (Neway)• Page 16 Cast Steel Gate, Globe & Check Valves (Audco)• Page 17 Cast Stainless Steel Gate, Globe & Check Valves (Emico)• Pages 18-20 Forged Steel Gate, Globe & Check Valves (Bonney Forge)• Page 21 Diaphragm Valves (Saunders)• Page 22 Knife Gate Valves (Vaas)• Page 23 Slurry & O-Port Valves (Vaas)• Pages 24-25 Butterfly Valves (Unicom)• Page 26 Butterfly Valves (Score / Audco)• Page 27 Butterfly Valves (Turnflo)• Page 28 Butterfly Valves (Watts)• Page 29 Butterfly Valves / Damper Valves (Watts / DeZurik / Onesteel)• Page 30 Plug Valves / Wafer & Lug Check Valves (DeZurik / Crane)• Page 31 Industrial Valves (Turnflo / Kitz)• Page 32 Industrial Valves (Turnflo / Victaulic) Resilient Seat Gate Valves (Watts)• Pages 33-36 Actuation & Controls

ONESTEEL PIPING SYSTEMS, Valves & Actuation, is a premier distributor of

Australia’s most extensive range of valves, actuation and accessories. With

over 100 distribution centres across the country, Onesteel is well placed to

deliver a wide range of products and services to oil, petrochemical, gas,

mining, mechanical service and industrial users. Through our global

resources from partnering leading world manufacturers, we are able to offer

optimum local solutions in valves and actuation. Onesteel maintains one of

the largest stockholdings of manual and actuated valves in Australia

ensuring timely delivery and total one-stop service to our customers.

ONESTEEL - QUALITY VALVES AT A COMPETITIVE PRICE

ONESTEEL VALVE PRODUCT PROFILE2

��

��

KITZ STEEL BALL VALVES ��

ONE PIECE END ENTRY / UTAM-FS-N(C)� Stainless Steel A351 CF8M � Reduced Port,

Floating Ball, NACE, Fire Safe � 15mm to 250mm� Class 150 & 300 RF Flanged � API 607 Ed.4 / BS

6755 Part 2, BS 5351 / API 608, API 598 / ISO 5211

TWO PIECE BODY / SCTBZM-FS-N(C)� Carbon Steel A216 WCB � Full Port, Floating Ball,NACE, Low Emission, Fire Safe � AGA 201 ApprovalNo. 3477 for Class 150 & 3478 for Class 300� 15mm to 200mm � Class 150 & 300 RF Flanged� API 607 Ed.4 BS 6755 Part 2, BS 5351 /API 608, API 598 / ISO 5211

ONE PIECE END ENTRY / SCTAM-FS-N(C)� Carbon Steel A216 WCB � Reduced Port,Floating Ball, NACE, Fire Safe � AGA 201 ApprovalNo. 4546 for Class 150 & 4547 for Class 300� 15mm to 250mm � Class 150 & 300 RF Flanged� API 607 Ed.4 / BS 6755 Part 2, BS 5351 / API 608,API 598 / ISO 5211

TWO PIECE BODY / UTBZM-FS-N(C)� Stainless Steel A351 CF8M � Full Port,

Floating Ball, NACE, Low Emission, Fire Safe� 15mm to 200mm � Class 150 & 300 RF Flanged

� API 607 Ed. 4 / BS 6755 Part 2, BS 5351 / API 608,API 598 / ISO 5211

BA

LL V

ALV

ES

��

��

ONESTEEL VALVE PRODUCT PROFILE 3


TWO PIECE / AK800SCTK-FS-N / AW800SCTK-FS-N� Carbon Steel A105 � Reduced Port, Floating Ball, NACE,Fire Safe � AGA 201 Approval No. 4537 � 8mm to 50mm� Class 800 NPT & SW ends � BS 6755 Part 2, API 598TWO PIECE / AK3000SCTK-FS-N� Carbon Steel A105 � Reduced Port, Floating Ball, NACE,Fire Safe � 8mm to 50mm � 3000 PSI, NPT ends� BS 6755 Part 2, API 598

HIGH TEMPERATURE / SCTB / UTBMTRIM 3H HARD GRAPHITE SEAT

TRIM 5H / 6H METAL SEAT� Carbon Steel A216 WCB � Stainless SteelA351 CF8M � Full Port, Floating Ball � High

Temperature up to 450° C � Metal Seated - abrasionresistant � Graphite Seated - steam service

� 15mm to 200mm � Class 150 & 300 RF Flanged� ANSI / FCI 70-2 Class V & Class VI

KITZ BALL VALVE SEATS� Available in various materials and configurations to suit a variety of applications

Hypatite PTFE seat (higher compression and creepresistance with PTFE advantages) suitable for

general applicationsup to 260°C

Trim 1H super-reinforcedPTFE seat with carbon &special fillers suitablefor special applicationswhere PTFE with highertemps. are required,e.g. up to 300°C

Swelless PFA seat withmaximum resistance to

Monomer, e.g.Butadiene & Styrene

up to 260°C

Trim 3H Hard Graphiteseat with encapsulated

stainless steel ring forhigh temp. & steamservice up to 500°C

Trim 5H stainless steel& Trim 6H stainless steelstellited metal seatsfor abrasive & high temp.applications up to 500°C

TWO PIECE BODY / SCTBM-FS� With Butt Weld ends andPup Pieces welded on

SPECIAL

BA

LL V

ALV

ES


��

��


PFA LINED / 10UTBLN� Stainless Steel A351 CF8M � Full Port, Floating Ball,

Flanged Ends � 15mm to 100mm � Class 150 Rated� Injection Molded PFA Lining on all internal surfaces,

chemical resistant & suitable for corrosive applications� Hypatite PTFE Seats � ASME B16.34, API 598

‘V’ PORT CONTROL / UVCM / UVCTM� Stainless Steel A351 CF8M � Full Port, Trunnion mounteddisc � Flekseat for general service & Knifeseat for heavy dutyapplications � Control / throttling & shut-off on slurries,abrasive services, viscous & fibrous fluids � 25mm to 350mm� Class 150 & 300 RF Flanged� ANSI / FCI 70-2 Class IV & Class II

BA

LL V

ALV

ES

METAL SEAT TRUNNION MOUNTED / SCTC6H / SCTCR6HUTC6HM / UTCR6HM� Carbon Steel A216 WCB � Stainless Steel A351 CF8M� Metal Seated for abrasive & high temp. application up to450°C � Full & Reduced Port, Double Block & Bleed� Sealant Injection, NACE, Fire Safe � 50mm to 350mm� Class 150, 300 & 600 RF Flange � API 6D / BS 5351, API 598

TWO PIECE TRUNNION MOUNTEDSCTCSM / SCTCRSM /

UTCSM / UTCRSM� Carbon Steel A216 WCB

� Stainless Steel A351 CF8M� RPTFE, Nylon+MoS2 or Peek Seats

� Full & Reduced Port, DoubleBlock & Bleed � Sealant Injection,NACE, Fire Safe � 50mm to 600mm

� Class 150, 300, 600, 900 &1500 RF Flange � API 607 Ed. 4,

API 6D / BS 5351, API 598

��

��



BA

LL V

ALV

ES

ITAG TRUNNION BALL VALVES ��

TOP ENTRY / IT & IN� 25mm to 1200mm � Class 150,300, 600, 900, 1500 & 2500,API 2000, 3000, 5000 & 10000� API 6D, Fire Safe API RP6F,API 6FA, API 607 & BS 6755� Secondary Seal, DoubleBlock & Bleed, Metal to Metal orSoft Sealing � Manual, GearOperated, Pneumatic, Hydraulicor Gas-Over-Oil Actuated

SUB-SEA� Top Entry Design� Manual, Actuatedor ROV systems

PIG LAUNCHING & RECEIVINGPC, PB, PS� One Piece Top Entry with Trap� Cleaning Pig, Bypass Pig &Separating Pig � 25mm to 600mm,API 6D � Class 150, 300, 600, 900,1500 & 2500 � Also API 2000,3000, 5000 & 10000

OILFIELD DRILLINGEQUIPMENT MANUFACTURED

Drill Collars, Kellys, Heavy Wall Drill Pipes, Pup Joints, KellyValves, Subs & Complete Mud Treating Systems, Swivel Joints

CRYOGENIC BALL VALVES� Stainless Steel A351 CF8M and other alloys� Full & Reduced Port� Floating & Trunnion Mounted design� One-Piece or Two-Piece Body Construction� Class 150 & 300 Manual & Actuated� Suitable for cryogenic service temps. to -196°C� Type Tested to comply with Shell SIPM/MESCInternational Standards


��

��

SRI TRUNNION BALL VALVES ��

ACTUATED / A 90RL� Carbon Steel, Stainless Steel

Steel & other alloys � DoubleBlock & Bleed or Double Block

Double Piston effect� Soft Seat, Metal Seat or

Metal + Soft Seat � SpringReturn or Double Acting

FLANGED x INTEGRAL BW / A 90RL� Stainless Steel A350 LF3 � Double Block & Bleed� Flanged RF x Integral Pup BW, eliminating need foradditional weld � Also available Integral Pup Butt Weldboth ends

FORGED THREE PIECE / A 90RL� Carbon Steel A350 LF2 � Stainless Steel A182 F316L,Duplex, Hastelloy, etc. � Full & Reduced Port, SealantInjection, NACE, Fire Safe � Double Block & Bleed orDouble Block Double Piston effect � Soft Seat, MetalSeat or Metal + Soft Seat � 15mm to 750mm � Class 150,

300, 600, 900, 1500 & 2500 Flanged & BW� API 6D, ASME B16.34, BS 5351, ASME VIIIDiv 1 & 2, BS 6755 Part 2

BA

LL V

ALV

ES

��

��


SRI TRUNNION BALL VALVES ��

SUB-SEA / AM 90RL� Manual, Actuated or ROV

Systems � Double Block & Bleedor Double Block Double Piston

effect � Soft Seat, Metal Seat orMetal + Soft Seat

HIGH TEMPERATURE, METALSEATED, LOW TEMPERATURE& CRYOGENICH 90RL, P 90RL & K 90RL� High Temperature with stemextension suitable fortemperatures to 450° C� Metal Seated with NickelAlloy or Tungsten Carbidecoating for abrasion &corrosion � Special ‘O’ Rings /Seals for varying temperatureapplications � Cryogenicextended bonnets withvapour column lengthssuitable for temperaturesdown to -196° C

DOUBLE ISOLATION TANDEM / J 90RL� Two independent trunnion ball valves clamped as onevalve ensuring safety � Separation of two processes bydouble isolation of lines � Double Block & Bleed orDouble Block Double Piston effect � Soft Seat, MetalSeat or Metal + Soft Seat

SPECIALVALVES

Pig Launching D 90RL, 3 or 4 way L, T or X port T 90RL, API 5,000 & API 10,000W90RL, Stem Extension for Below Ground Gas Service, Dosing Valves

BA

LL V

ALV

ES


��

��

EMICO STEEL BALL VALVES ��

TWO PIECE FIRE SAFE / EA 25AC & EA 25AF� Carbon Steel A216 WCB � Stainless Steel A351CF8M, Alloy 20/CN7M, Duplex, Super Duplex & otheralloys � Investment cast body � Full Port, FloatingBall, Fire Safe � RPTFE Seats (option PEEK)� 15mm to 200mm � Class 150 RF Flanged� API 607 Ed.4 / ASME B16.34 / API 598 / ISO 5211

THREE PIECE FIRE SAFE / EA 305C & EA 305A� Carbon Steel A216 WCB � Stainless Steel

A351 CF8M � Investment cast � Full Port,floating ball, fire safe � Rated 7000 kPa

� AGA 201 approval No. 5547 � 15mm to50mm � NPT, SW & BW ends

� API 607 Ed.4 , API 598

TWO PIECE NON-FIRE SAFEEA 402C & EA 402F

� Carbon Steel A216 WCB� Stainless Steel A351 CF8M

� Investment cast body � Full Port,Non-Fire Safe, Floating Ball

� 15mm to 200mm � Class 150 RFFlanged � ASME B16.34 /

API 598 / ISO 5211

EA 305C withwelded-on

pup pieces &spindle adaptor

for below-groundgas lines

PFA LINED / PB 11� Stainless Steel A351 CF8M or CarbonSteel A216 WCB � Investment cast� Full Port, Floating ball � ANSI 150 RFFlanged � 15mm to 100mm � InjectionMolded PFA Lining on all internalsurfaces, chemical resistant & suitablefor corrosive applications � PTFE Seats� API 598, ISO 5211

BA

LL V

ALV

ES

��

��


EMICO STEEL BALL VALVES ��

THREE PIECE CRYOGENIC / EA 309A� Stainless Steel A351 CF8M � Investment cast body & ends� Extended bonnet for cryogenic service to -196°C� PCTFE (Kel-F) seats � Relief hole drilled upstream of ball, witharrow marking uni-directional flow � Full Port, floating ball, fire safe� Rated 14000 kPa � 15mm to 50mm � NPT, SW & BW ends� BS 6364, API 607 Ed.4, API 598, ISO 5211

THREE WAY & FOUR WAYEAL 3WF / EAL 4WF / EAL 3WSE

� Stainless Steel A351 CF8M orCarbon Steel A216 WCB

� Investment cast � Full Port,Floating Ball � L-Port or T-Port

� 15mm to 200mm � Class 150 &300 RF flanged & 7000 kPa

NPT/BSP ends � API 598, ISO 5211

JACKETED / EA 503� Stainless Steel A351 CF8M or Carbon Steel A216 WCB

� Investment cast � Floating ball, Reduced Port� 15mm to 100mm � Class 150 RF flanged ends

� API 598, ISO 5211

OTHER VALVESAVAILABLE

Sanitary Butterfly Valve & Sanitary Ball Valve with Clamp Ends,Wafer Ball Valves, Oil Field Valves and 6000/10,000 psi Needle Valves

ONE PIECE END ENTRY / EA 503� Carbon Steel A216 WCB � Stainless Steel A351 CF8M� Investment cast � Reduced Port, Floating Ball,Fire Safe � 15mm to 100mm � Class 150 RF Flanged� API 607 Ed.4 / ASME B16.34 / API 598 / ISO 5211

BA

LL V

ALV

ES


��

��

LCM CHEROFLOW BALL VALVES ��

THREE PIECE CLASS 800 & 1500 FIRE SAFEHD 350T & HD 350R� Carbon Steel A105 � Stainless Steel A182 F316� Optional Materials: A350 LF2, A182 F304, A182 F51(Duplex), A182 F44, Monel K500, AB2, B62 & other materialson request � Forged steel body & ends � Full & reducedport, floating ball, fire safe � Class 800 & 1500� Soft seat (RPTFE, Nylon & PEEK) & Metal seat (TungstenCarbide Coated) � 15mm to 50mm � NPT, SW & BW ends� API 607 Ed.4, EN ISO 17292, BS EN 12266-1

ONE PIECE SIDE ENTRYHD 200T, HD 200R, HD 215T & HD 215R� One Piece Side Entry � Carbon SteelA105 � Stainless Steel A182 F316� Optional Materials: A350 LF2,A182 F304, A182 F51 (Duplex), A182 F44,Monel K500, AB2, B62 & other materialson request � Forged steel body� Full & reduced port, floating ball,fire safe � Class 800, 1500 & 2500� Soft seat (RPTFE, Nylon & PEEK) &Metal seat (Tungsten Carbide Coated)� 15mm to 50mm � NPT & SW ends withnipples � API 607 Ed.4, EN ISO 17292, BS EN 12266-1

WN 355Pup / TransitionPieces

WN 250Pup / Transition

Pieces

BA

LL V

ALV

ES

��

��


FULLY WELDED TRUNNION BALL VALVES ��

BA

LL V

ALV

ES

ITAG FULLY WELDED BODY / IF� 25mm to 1500mm � Class 150,300, 600, 900, 1500 & 2500 � Available in all materials � Metal to Metal Seal (primary metal,secondary soft) � Double Piston Seat Seal Effect (DPE) optional � Sealant Injection, DoubleBlock & Bleed � Manual, Gear Operated, Pneumatic, Hydraulic or Gas-Over-Oil Actuated

KITZ FULLY WELDED BODYWSCTCWBL

� Forged Steel A350 LF2� Full & Reduced Port, Double Block & Bleed

� 100% Radiography oncircumferential welds

� Sealant Injection, NACE,Fire Safe � 50mm to 900mm

� Class 150, 300 & 600BW or Flanged� API 607 Ed. 4,

API 6D / BS 5351, API 598

BOHMER FULLY WELDED BODY� Carbon Steel Body � Full orReduced Port, Double Block &Bleed � Spring Energised Seats� Metal or Soft Seated � 100%Radiography on circumferentialwelds � Sealant Injection, FireSafe BS 6755 / API 6FA � 25mmto 900mm � Class 150, 300, 600,900 & 1500 BW or Flanged Ends� API 6D / NACE MR O1-75� Lever, Gear, Pneumatic, Electric or Hydraulic Operation� Options: Extended Stem for Underground Service with DrainVent & Emergency Sealant Injection, Bypass, Special Coatings

¨


��

��

KITZ CAST CARBON & ALLOY STEEL VALVES ��

CAST STEEL GLOBESCJS / SCJSY

� Carbon Steel A216 WCB � Swivel Disc � Renewablewelded-in Body Seat Rings � Stellite Trim, NACE � Garlock

EVSP 9000 Low Emission Packing � 50mm to 450mm� Class 150, 300, 600, 900 & 1500 Flanged, BW optional

� Other alloys: WC6, WC9, C5, C12, etc. � API 600, BS 1873,API 598, ASME B16.34

CAST STEEL GATE / SCLS / SCLSY� Carbon Steel A216 WCB � Flexible Wedge � Renewablewelded-in Body Seat Rings � Stellite Trim, NACE� Garlock EVSP 9000 Low Emission Packing � 50mm to 900mm� Class 150, 300, 600, 900 & 1500 Flanged, BW optional� Other alloys: WC6, WC9, C5, C12, etc.� API 600, BS 1414, API 598, ASME B16.34

CAST STEEL SWING CHECK / SCOS / SCOSY� Carbon Steel A216 WCB � Renewable welded-in Body SeatRings � Stellite Trim, NACE � 50mm to 750mm � Class 150,300, 600, 900 & 1500 Flanged, BW optional � Other alloys: WC6,WC9, C5, C12, etc. � API 600, BS 1868, API 598, ASME B16.34

PRESSURE-SEAL GATE / SCLSPY� Carbon Steel A216 WCB � Flexible Wedge � Renewable

welded-in Body Seat Rings � Pressure-Seal Bonnet Joint� Stellite Trim � 50mm to 600mm � Class 600, 900, 1500 &

2500 Butt Weld � Other alloys: WC6, WC9, C5, C12, etc� API 600, API 598, ASME B16.34, ASME B16.25

CAST

STE

EL G

ATE,

GLO

BE

& C

HEC

K VA

LVES

��

��


KITZ CAST CARBON & STAINLESS STEEL VALVES ��

STAINLESS STEEL & HIGH ALLOYSTEEL CORROSION RESISTANTSERVICEUMAM / UMCM, UPAM / UPCM,UOAM / UOCM� Gate, Globe & Check Valves� Integral Seats � 15mm to600mm � Class 150, 300, 600, 900 &1500 Flanged � CF8M (316SS),CF8 (304SS), CF8C (321SS), etc.� API 603, ASME B16.34,API 600, API 598

STAINLESS STEEL LOW TEMP &CRYOGENIC SERVICEUMCXM / UPCXM / UOCXM� Gate, Globe & Check Valves� Ethylene, LPG, LNG down to - 196°C � Cryogenic Gates &Globes with Extended Bonnets� Type approval tests to SIPM /SIOP specs � 50mm to 600mm� Class 150, 300 & 600 RF Flanged� SS CF8M & CF8 � API 600,ASME B16.34, API 598

CARBON STEEL & STAINLESS STEELLOW TEMPERATURE SERVICE

SCLX / SCJX / UMAXM / UPAXM� Gate & Globe Valves � Low

Temperature service -45° C to -105° C� Extension Bonnet for Stuffing Box

protection � Single piece castextended bonnet � 50mm to350mm � Class 150 & 300 RF

Flanged � CS A350 LCB, LCC & SSA351 CF8M � API 600,ASME B16.34, API 598

CAST

STE

EL G

ATE,

GLO

BE

& C

HEC

K VA

LVES


��

��

NEWAY CAST STEEL VALVES ��

CAST STEEL GATE / G1RA8 / G3RA8 / G6RA5N� Carbon Steel A216 WCB � Flexible Wedge � Renewablewelded-in Body Seat Rings � Stellite Seat / Trim, NACE (standard inClass 600) � 50mm to 900mm � Class 150, 300, 600, 900 & 1500 Flanged,BW optional � Other alloys: WC6, WC9, C5, C12, etc.� API 600, BS 1414, API 598, ASME B16.34

LOW TEMPERATURE& CRYOGENIC SERVICE� Gate, Globe & Check Valves� Carbon Steel A350 LCB & LCCfor low temperature service -45°Cto -105°C � Stainless Steel A351CF8M & CF8 for Cryogenic Serviceto -196°C � Ethylene, LPG, LNGdown to -196°C � Gates & Globeswith Extended Bonnets for StuffingBox protection � Class 150, 300,600, 900 & 1500 Flanged � API 600,BS 6364, API 598, ASME B16.34

CAST

STE

EL G

ATE,

GLO

BE

& C

HEC

K VA

LVES

��

��


NEWAY CAST STEEL VALVES ��

Optional:Gate Valve Locking Mechanism

CAST STEEL GLOBEGL1RA8 / GL3RA5 / GL6RA5N� Carbon Steel A216 WCB� Swivel Disc� Renewable welded-in Body Seat Rings� Stellite Seat / Trim, NACE (standard inClass 600) � 50mm to 450mm� Class 150, 300, 600, 900 & 1500Flanged, BW optional� Other alloys: WC6, WC9, C5, C12, etc.� API 600, BS 1873,API 598, ASME B16.34

CAST STEEL SWING CHECKS1RA8 / S3RA8 / S6RA5N� Carbon Steel A216 WCB� Renewable welded-inBody Seat Rings � Stellite Seat /Trim, NACE (standard in Class 600)� 50mm to 750mm� Class 150, 300, 600, 900 & 1500Flanged, BW optional� Other alloys: WC6, WC9, C5,C12, etc. � API 600, BS 1868,API 598, ASME B16.34

CAST

STE

EL G

ATE,

GLO

BE

& C

HEC

K VA

LVES


��

��

AUDCO CAST STEEL & CRYOGENIC STEEL VALVES ��

LOW TEMPERATURE & CRYOGENIC SERVICE� Gate & Globe Valves � Ethylene, LPG, LNG down

to -196°C � Cryogenic Gates & Globes with ExtendedBonnets � 50mm to 600mm � Class 150, 300 & 600 RF

Flanged � SS CF8M & CF8 for cryogenicservice to -196°C � CS LCB &

LCC for low temperature serviceto -46°C � API 600, API 603,

ASME B16.34, API 598, BS 6364

PRESSURE SEAL HP GATE, Y-GLOBE & CHECK381UP / 386UP / 391UP / 366US / 380U / 385U / 390U� Carbon Steel A216 WCB � Parallel Slide Discs � ‘Y’ Globefor lower pressure drop � Pressure-seal Bonnet Joint� Seal-welded Seat Rings � Stellite Trim � 50mm to 600mm� Class 900, 1500 & 2500 Butt Weld � Other Alloys: WC6,WC9, C12 � ASME B16.34, API 598, ASME B16.25

CAST STEEL GATE / SHELL SIPM - MESC P113-1 / 113-16N / P133-1 / 133-16N � Carbon Steel A216 WCB � Flexible Wedge � Trim 1 & 16 NACE � 50mm to 300mm � Class 150 & 300 Flanged � API 600, BS 1414,API 598, ASME B16.34

CAST STEEL GLOBE /SHELL SIPM - MESC P413-1 / P433-1 � Carbon Steel A216 WCB � Swivel Disc � Trim 1 � 50mm to 200mm � Class 150 & 300Flanged � Shell SIPM / MESC approved � API 600, BS 1873, API 598, ASME B16.34

CAST STEEL SWING CHECK SHELL SIPM - MESCP713-1 / 713-16N / P733-1 / 733-16N� Carbon Steel A216 WCB � Trim 1 & 16 NACE � 50mm to 300mm� Class 150 & 300 Flanged � Shell SIPM / MESC approved� API 600, BS 1868, API 598, ASME B16.34

Gate Valvefitted withProximitySensorcabled toJunction Boxfor positionstatus

CAST

STE

EL G

ATE,

GLO

BE

& C

HEC

K VA

LVES

��

��


EMICO STAINLESS STEEL VALVES ��

CAST STAINLESS STEEL CHECK / EAS-306 / EAS-315� Stainless Steel ASTM A351 CF8M � Integral Body Seat� Swing Type Disc � Bolted Cover � Raised Face FlangedEnds � ANSI 150 & 300 - 15mm to 300mm� ASME B16.34, ASME B16.10, ASME B16.5 API 598

CAST STAINLESS STEEL GATE / EAS-105 / EAS-115� Stainless Steel ASTM A351 CF8M � Integral T-head Stem� Fully guided Flexible Wedge � Self-aligning Gland� Raised Face Flanged Ends � Integral Body Seats� Outside Screw & Yoke � Rising Stem � Non-risingHandwheel � ANSI 150 - 15mm to 400mm / ANSI 300 - 15mmto 300mm � API 603, ASME B16.34, ASME B16.10, ASME B16.5

CAST STAINLESS STEEL Y-STRAINER / EAS-405� Stainless Steel ASTM A351 CF8M � Bolted Cover� Raised Face Flanged Ends � ANSI 150 - 15mm to

300mm � ASME B16.34, ASME B16.5, API 598

CAST STAINLESS STEEL GLOBEEAS-205 / EAS-215

� Stainless Steel ASTM A351 CF8M � Integral T-head Stem� Swivel Disc � Self-aligning Gland � Raised Face

Flanged Ends � Integral Seat � Bolted Bonnet� Outside Screw & Yoke � Rising Stem & Handwheel

� ANSI 150 & 300 - 15mm to 300mm � ASME B16.34, ASMEB16.10, ASME B16.5, API 598

CAST

STE

EL G

ATE,

GLO

BE

& C

HEC

K VA

LVES


��

��

BONNEY FORGE FORGED STEEL VALVES ��

FORGED GLOBEHL 300 / 9HL 300 / Y 300 / 9Y300� CS A105N � Loose SwivelDisc � Straight or ‘Y’ Pattern� Reduced Bore � SW, NPT orBW Ends � Class 800, 1500,2000 & 4500 � 15mm to 50mm� BS 5352, ASME B16.34,API 598, BS 6755� Other Alloys: Chrome Moly,Stainless Steel, etc.

FORGED GATEHL 100 / 9HL 100 / WL 100

� CS A105N � Solid Wedge� Bolted or Welded Bonnet

� Reduced Bore � SW, NPT or BW Ends� Class 800, 1500, 2000 & 4500

� 15mm to 50mm � API 602, BS 5352,ASME B16.34, API 598, BS 6755� Other Alloys: Chrome Moly,

Stainless Steel, etc.

FORGED PISTON, BALL, SWING CHECKHL 400 / HL 500 / HL 600

� CS A105N � Solid Wedge� Straight or ‘Y’ Pattern

� Reduced Bore � SW, NPT or BW Ends� Class 800, 1500, 2000 & 4500

� 15mm to 50mm� BS 5352, ASME B16.34, API 598, BS 6755

� Other Alloys: Chrome Moly,Stainless Steel, etc.

FORG

ED S

TEEL

GAT

E, G

LOB

E &

CH

ECK

VALV

ES

��

��



FORGED INTEGRAL FLANGEDGATE, GLOBE, CHECKL1 100 / L3 100 / L6 100 / L1 300 / L3 300 / L6 600 /L1 600 / L3 600 / L6 600� CS A105N � Gate, Globe & Swing Check� Reduced Bore � Class 150, 300, 600, 1500 &2500 RF Flanged � 15mm to 50mm� API 602, BS 5352, ASME B16.34, API 598,BS 6755 � Other Alloys: Chrome Moly,Stainless Steel, etc.

FORGED BELLOWS SEALED / SWHL 100 / SWHL 300� CS A105N � Gate & Globe � Reduced Bore

� Stellite Trim � Zero Leakage & Emission Free� SW & NPT Ends � 15mm to 50mm � API 602, ASME B16.34,

API 598, BS 6755 � Other Alloys: Chrome Moly,Stainless Steel, etc.

FORGED EXTENDED BODY GATEVL 100F� CS A105N � Valv-O-Let� Class 800 � 15mm to 50mm� API 602, ASME B16.34,API 598, BS 6755� Other Alloys: Chrome Moly,Stainless Steel, etc.

FORGED CRYOGENIC SERVICE1CL 100 / 3CL 100 / 6CL 100 / CL 100

� SS A351 CF8M � Gate & Globe � Ethylene, LPG, LNGdown to -196°C � Extended Bonnets � 15mm to 50mm

SW & NPT Ends for Class 800 � BS 5352, BS 6364,ASME B16.34, API 598, BS 6755

� Other Alloys: Chrome Moly, Stainless Steel, etc.

FORG

ED S

TEEL

GAT

E, G

LOB

E &

CH

ECK

VALV

ES


��

��


API 6A � Gate & Check (Globe Valve on request) � Design

Construction: API 6A � Product Specification Level: PSL 1,PSL 2 & PSL 3 � Classes: 2000, 3000, 5000 & 10000 PSI

� Testing: API 6A � Drift Test according to API 6A for Gate &Swing Check Valves only � Flange Ends according to

API 6A RF or RTJ 6B or 6BX type � Clamp-Lock & ScrewedEnds to API LP � Size: 2 1/16” to 4 1/16”

COMBINATION DOUBLEBLOCK & BLEED� Double Ball or Double GateValves with Needle BleedValve � Special combination:With Check Valve & Quill forInjection � Design: ANSIB16.34, B 31.1, B31.3 &MSS-SP84 � Classes: Up to4500 lbs according to ANSIB16.34 � Port Dimensions tocustomer specification� Testing: API 598 & BS 6755� Fire Safe: API 6A orBS 6755 � Size: 8mm to150mm � Socket Weld Ends,Screwed Ends, Butt WeldingEnds, Flanges RF or RTJ &Clamp Locks

PRESSURE SEAL GATE, GLOBE & CHECK� Gate: Integral Flexible Wedge, Parallel Disc

or Split Type� Globe: Loose on Stem, Needle or Parabolic� Check: Swing or Fully Guided Piston Type� Design Construction: ANSI B16.34� Classes: Up to 4,500 lbs. Standard and Special,intermediate classes on request � Testing:API 598 & BS 6755 � Butt Welding Endsaccording to ANSI B16.25 � Face to Faceaccording to ANSI B16.10 short pattern� Size: 15mm to 300mm (larger sizes on request)

FORG

ED S

TEEL

GAT

E, G

LOB

E &

CH

ECK

VALV

ES

��

��


SAUNDERS DIAPHRAGM VALVES ��

SAUNAIR PNEUMATIC ACTUATOR / EC� On /Off Duties for Process Control � Suitable forWier Type Valve � Sizes 8mm to 50mm� Spring Return & Double Acting Models� Limit Switch for Position Indication Available

WIER TYPE & STRAIGHT THROUGH / A & KB� Cast Iron, SG Iron, Cast Steel, Bronze, Gunmetal & Stainless Steel � Sizes 15mm to 350mm� Screwed BSP, Flanged AS 2129 Table ‘D’ & ANSI 125 � Protective Linings & Coatings for LongerLife. Available in Hard Rubber, Butyl Rubber, Glass, Halar (ECTFE), Polypropylene (PP),Polyvinylidene Fluoride (PVDF), Ethylene, Tetrafluoroethylene (ETFE) & Perfluoroalkoxy (PFA)

SAUNAIR PNEUMATIC ACTUATOR / ES� On / Off & Control Duties � Suitable for type ‘A’ & ‘KB’

Valves � Sizes 8mm to 250mm � Manual Overide FacilityPermits Valve Operation in the Event of Air Failure

� Spring Return & Double Acting Models � Accessories:Pneumatic & Electro-Pneumatic Positioners, Travel Limit

Stop, Limit Switch, Local Position Indicator

DIA

PHRA

GM

VA

LVES


��

��

VAAS KNIFE GATE VALVES ��

SQUARE / RECTANGULAR / 960� Fabricated Body � Uni-Directional� Custom Size & Flange Drilling � Metal Seat(Optional: O-Ring Soft Seat) � Handwheel orActuated � Size up to 1200mm� Non Stainless Steel Surfaces Epoxy Painted

FULL LUG / 940� SS A351 CF8M � Uni-Directional� High Performance Rated 10 bar� Metal Seat (Options: Stellite, V-Port)� Replaceable Soft Seat, EPDM, Viton� Ni-Hard & Polyurethane DeflectionCones, Purge Points � Copper Braidor Inconel Wiper Rings � 50mm to600mm, larger sizes available on request� AS 2129 Table ‘D’, ‘E’ or ANSI 150� MSS SP-81, TAPPI TIS-408� Stainless Steels & Other Alloys� Handwheel or Actuated

WAFER / 950� Cast Iron / Ductile Iron � Uni-Directional

� High Performance Rated 10 bar� Metal Seat (Options: Stellite, V-Port)� Replaceable Soft Seat, EPDM, Viton� Ni-Hard & Polyurethane Deflection

Cones, Purge Points � Copper Braid orInconel Wiper Rings � 50mm to 600mm

� AS 2129 table ‘D’, ‘E’ or ANSI 150� MSS SP-81, TAPPI TIS-408

� Stainless Steel & Other Alloys

COAL BURNER / 970� Cast Iron Body � Uni-Directional

� Hard Faced Integral or Rotatable Seats� Full Bore Identical to Pipe I.D.

� 50 psi Rating Explosion Pressure� 100mm to 600mm

Wafer Flanged � NFPA 8503

KNIF

E G

ATE

VALV

ES

��

��


VAAS SLURRY & O-PORT VALVES ��

BI-DIRECTIONAL / 755 FRL� Bi-Directional Slurry Valve� Cast Iron Body, SS Trim� Rated 10 bar(Optional: 16 bar & 20 Bar)� Two-Piece BoltedDesign � Reinforced &Replaceable PolyurethaneLiners & Peripheral NitrileSeai � Multi-Layered SquareBraided Packing with NitrileQuad Seal � Full Port Equalto Sch.40 Pipe I.D.� Non-SS Surfaces EpoxyPainted � Handwheel, Gearor Actuated � 50mm to600mm � AS 2129 Table ‘D’,‘E’ or ANSI 150 � MSS SP-81Face to Face Dimensions� Ductile Iron, StainlessSteel & Other Alloys

Seat / Seal / Packing Design

O-PORT / 980� Cast Iron or Stainless Steel body

� Through Port � Metal or Stellite Seat(Optional: O-Ring Soft Seat) � Handwheel

or Actuated � Size up to 600mm � NonStainless Steel Surfaces Epoxy Painted

� AS 2129 Table ‘D’, ‘E’ or ANSI 150

BI-DIRECTIONAL / 752� Bi-Directional Slurry Valve � Cast Iron orSS body, SS Trim � Rated 10 bar (Optional: 16bar & 20 Bar) � Two-Piece Bolted Design� Reinforced Peripheral Nitrile or Viton Seal� Multi-Layered Square Braided Packing withNitrile Quad Seal � Full Port Equal to Sch.40Pipe I.D. � Non-SS Surfaces Epoxy Painted� Handwheel, Gear or Actuated � 50mm to600mm � AS 2129 Table ‘D’, ‘E’ or ANSI 150� MSS SP-81 Face to Face Dimensions

SLU

RRY

& O

-PO

RT V

ALV

ES


��

��

UNICOM BUTTERFLY VALVES ��

Lugged Design withCast AluminiumLockable Lever

BU

TTER

FLY

VALV

ES

� Carbon Steel WCB, SS316 CF8M, Duplex, Super Duplex & other alloys � Wafer, Lugged &Double Flanged � Double Eccentric Disc, ENP or Stellited � Graphite or PTFE Packed Gland� ANSI B16.34 Class 150, 300 & 600 � Low to High Temperature Service 650°C Max.� Shut-Off: Bubble Tight on Soft-Seated Valves & Class V on Metal Seated Valves � 50mm to1500mm � ISO 5752 Short, API 609, MSS SP-68

Double Flanged

Wafer Design with CastIron Adjustable Lever

Lugged Design withGear Operator

Large Diameter Lugged Design with Gear Operator

Wafer, Lugged or Double-Flanged High-Seal HighPerformance Butterfly Valves are available in:• GTD (Soft-Seat Non-Fire Safe)• FSD (Fire Safe)• MTD (Metal Seat)

HIGH PERFORMANCE HIGH-SEAL GTD - Soft Seat Non-Fire Safe • FSD - Fire Safe • MTD - Metal Seat

��

��


UNICOM BUTTERFLY VALVES ��

DOUBLE FLANGED UNI SEAL / GFB� Rubber Lined Body for Anti-Corrosion � Flange RatingANSI Class 150 & 300, AWWA C504 � Eccentric Disc/Shaft� Bi-Directional Positive Sealing with Rubber Seated Ring� 150mm to 2250mm � Rubber Seat Ring with Teflon &Metal Seat options � Temperature Range: Rubber Seat up to120°C, Teflon Seat up to 250°C & Metal Seat up to 650°C� Options: Internal Rubber Lining, Stem Extensions,Special Materials

ELASTOMER SEATED / GRS� Bi-Directional Positive Sealing � 40mm to 1500mm

� Neoprene, Silicone, Viton, NBR, White NBR, EPDM, White EPDMSeats � CI, DI, CS & SS � Anti-Blowout Shaft Design

� Maximum 10 Bar, Flange Rating ANSI Class 150/PN10� Temperature -20°C to 120°C � Options: Teflon V-Packing, Stem

Extension, Monel/Aluminium Bronze Body & Disc

BUTTWELD / BWD� Double Metal Seated Sealing � Class 150 & 300� 200mm to 1500mm � Temperature up to 650° C� Butt Weld or Flanged End Connections� Tight Shut-Off in Both Directions� Anti-Blowout Shaft Design � Inherently Fire-Safe� Carbon Steel, Stainless Steel & other alloys

TEFLON LINED TWO PIECE BODY / GTS� Fully Lined Body - Teflon Cartridge/Virgin PTFE Liner for Anti-

Corrosive & Chemical Applications � Class 150 � 50mm to 300mm� PFA Lined Disc � One-Piece PFA Encapsulated Disc & Shaft� Silicone Back-Up Ring � Working Pressure Maximum 6 Bar,

Flange Rating ANSI Class 150/PN10 � Bi-Directional Sealing� Double Structured Stem Packing � Low Operating Torque

� Options: Non-Coated Plain Disc, Mirror Polished Disc

BU

TTER

FLY

VALV

ES

UNI SEAL GTS - Teflon Lined • GFB - Rubber Lined Body • GRS - Elastomer Seated

BUTTWELD BWD - Double Metal Seat


��

��

SCORE TRICENTRIC BUTTERFLY VALVES ��

TRICENTRIC / METAL-TO-METAL TRIPLE OFFSET� Tight Shut-Off, Bi-Directional � Patented 3-Way EccentricSeat Design Assures Frictionless Seal for High Cycle /Extended Life � Seal Stack is Stainless Steel Laminations

with Graphite, Secured to the Disc� Excellent Flow, Throttling & Shut-OffCharacteristics from Cryogenic -196° Cto High Temperature 694° C� 80mm to 1800mm� Class 150, 300 & 600� Fire-Safe API 607 Ed. 4, API 609,API 598, ANSI / FCI 70-2, API 6D,MSS SP-68, ISO 5752, NACE MR 01-75

AUDCO BUTTERFLY VALVES ��

DOUBLE FLANGED / VWS-TBG224N� Carbon Steel or Stainless

Steel Body & Disc � Self EnergisingDisc Seal � Offset Disc � Welded

Construction to ASME Sec. IX� 200mm to 2000mm

� Gear Operated, Hydraulic,Electric or Pneumatic

� Rating: PN6, PN10, PN16 & PN25

BU

TTER

FLY

VALV

ES

��

��


TURNFLO BUTTERFLY VALVES ��

THROUGH SHAFT / T5 (WAFER) / T6 (LUGGED)� Cast Iron Body, 304SS Disc � EPDM, Nitrile or

Viton Seats � Cartridge Type Replaceable Seat� Full Vacuum (-1 bar) to 16 bar

� AGA 201 Approval No. 5630 � 50mm to 300mm� AS 2129 table ‘E’, ANSI 125 / 150

� Design Rating & Face to Face BS 5155� 350mm to 600mm in Ductile Iron, Rated 10 bar

SLIM DISC / T3 (WAFER) / T4 (LUGGED)� Cast Iron Body, 316SS Disc� EPDM, Nitrile or Viton Seats� Slim Disc Design for Improved Flow� Cartridge Type Replaceable Seat� Full Vacuum (-1 bar) to 16 bar� AGA 201 Approval No. 5630� 50mm to 300mm� AS 2129 table ‘E’, ANSI 125 / 150� Design Rating & Face to Face BS 5155

SLIM DISC / T1CS32 (WAFER)� Cast Iron Body, 316SS Disc� EPDM Seats� Slim Disc Design for Improved Flow� Cartridge Type Replaceable Seat� 16 bar� 50mm to 300mm� AS 2129 table ‘E’� Design Rating & Face to Face BS 5155� Lockable Lever

BU

TTER

FLY

VALV

ES


��

��

CONCENTRIC BONDED RUBBER-LINED / TYPE D� Body Cast Iron, Ductile Iron, Aluminium Bronze,Stainless Steel � Flanged ends, Concentric Disc� Seat options Natural Rubber, NBR, Abrasion-Resistant Rubber, EPDM, Viton, Hypalon, Neoprene� Epoxy coated finish � Rated 10 bar & 16 bar� Applications water works - water supply & sewage,power & public utilities, steel mill, etc.� 50mm to 1400mm

ECCENTRIC RESILIENT SEATED / TYPE Dc

� Ductile Iron � Flanged ends - shortbody (4A) & long body (4) � Single

eccentric & double eccentric � NBR &EPDM rubber-seated disc � Bubble-tight

sealing effected by rubber seal retainedin disc � Epoxy resin coated internal &

external surfaces � Rated 10 bar & 16 bar� Applications water works - water supply

& sewage, power, steel mill, etc.� 100mm to 1200mm

ECCENTRIC RESILIENT SEATED / TYPE Db

� Ductile Iron � Flanged ends - shortbody (4A) & long body (4) � Singleeccentric & double eccentric � Seat NBR & EPDM � Bubble-tightsealing effected by rubber seal fitted inbody (dovetail groove) � Epoxy resincoated internal & external surfaces� Rated 10 bar & 16 bar � Applicationswater works - water supply & sewage,power, steel mill, etc. � 100mm to 1200mm

WATTS BUTTERFLY VALVES ��

BU

TTER

FLY

VALV

ES

��

��


AWWA WAFER & LUGGED / BAW� Complies with AWWA C504 standards

� Offset disc design � Cast Iron &Ductile Iron � Flanged & Mechanical joint

� Lever, Handwheel, Chainwheel, Squarenut,Pneumatic & Electric Actuation � 80mm to3000mm � Temp. to 143°C � AWWA Class25A, 75B, 150B & 250B � Pressure Rating:

170 to 520 kPa, 1030-1700 kPa � Bubble-tightto full rated pressure

DE ZURIK BUTTERFLY VALVES ��

FABRICATED DAMPER VALVES ��

DOUBLE FLANGED DAMPER� Mild Steel or StainlessSteel Fabricated Body� Mild Steel or StainlessSteel Disc � Metal Seat� Damper / Non-Sealingfor High-Temperature, Low-Pressure Gas application

ECCENTRIC RESILIENT SEATED /TYPE Dc

� Ductile Iron � Flanged ends� Single eccentric & doubleeccentric � NBR & EPDMrubber-seated disc � Bubble-tight sealing effected by rubberseal retained in disc � Epoxyresin coated internal & externalsurfaces � Rated 10 bar & 16 bar� Applications water works,hydro-electric dam, power plant,steel mill, etc.� 100mm to 1200mm

WATTS BUTTERFLY VALVES ��

BU

TTER

FLY

& D

AM

PER

VA

LVES


��

��

CRANE WAFER & LUG CHECK VALVES ��

UNI-CHECK II ®� Spring-loaded single disc � Wafer, Lug & Semi-Lug� Metal & Soft Seat � 40mm to 1200mm � Classes ANSI 125 to 600� Carbon Steel, Stainless Steel & other Alloys � API 594, API 598� Also available with Lever & Counterweight

DE ZURIK PLUG VALVES ��

ECCENTRIC PLUG / PEC� Eccentric action and resilient plug facings � Straight-throughflow for minimum pressure drop � Choice of resilient plug facings,welded-in corrosion resistant nickel seat & variety of end styles� Suitable for clean & dirty liquids in various water & controlapplications, sludges, slurries, gases, etc. � Cast Iron, Ductile Iron,Aluminium, Carbon Steel, Stainless Steel, Alloy 20, Monel & AcidResistant Bronze � Lever, Handwheel,Chainwheel, Squarenut, Pneumatic &Electric Actuation � 15mm to 1800mm� Pressure Rating: 860-3100 kPa CWPshut-off pressure up to 1890 kPa

THREE-WAY & FOUR-WAY TAPERED PLUG / PTW / PFW� Designed for throttling & diverting of clean, dirty, viscous & corrosiveliquids, sludge, slurries, etc. � Single & Double plug styles for a variety

of flow combinations � Choice of resilient plug facings for drop-tightshut-off, metal plugs for high-temp. � Cast Iron, Aluminium, Carbon

Steel, Stainless Steel � Lever, Handwheel, Chainwheel, Pneumatic &Electric Actuation � 80mm to 400mm � Pressure Rating: 860 kPa CWP

THE CRANERANGE ALSO

INCLUDES

Tilting Disc Wafer Checks, Noz Chek® Fast Response Non-Slam Checks,Urethane-Lined Duo-Checks for slurry service, Full Bore Swing Checksto AS 3578 & Iron Body Check Valves for mechanical services

PLU

G &

CH

ECK

VALV

ES

DUO-CHECK II ®� Spring-loaded dual discs � Wafer, Lug

Wafer, Double Flanged, Buttweld & GraylocHub � Metal & Soft Seat � 40mm to

2200mm � Classes ANSI 125 to 4500, API2000 to 10000 � Carbon Steel, Stainless

Steel & other Alloys � Optional: Series “H”Retainer-Less design � API 594, API 598

��

��


TURNFLO & KITZ GENERAL INDUSTRY VALVES ��

STAINLESS STEEL / SGA / SGL / SSC / SB1 / SB2 / SB3 / SYS� Turnflo Gate, Globe, Check, Strainer & Ball Valves

BRASS & BRONZE / AS-FH / D / R / TN / BGA / BRGA / BCH / BYS / B100 / B84� Kitz Gate, Globe, Check & 3-Way Ball Valves � Turnflo Gate, Globe, Check, Strainer & Ball Valves

IND

UST

RIA

L VA

LVES


��

��

TURNFLO & VICTAULIC GENERAL INDUSTRY VALVES ��

WATTS RESILIENT SEAT GATE VALVES ��

RESILIENT SEAT RISING STEM / TYPE Z-1X� Cast Iron / Ductile Iron � Rubber coateddisc � Epoxy painted internal & externalsurfaces � ANSI / AWWA C509-94 for watersupply, fire protection & sewage � 40mm to600mm � Flanged end connections� Rated 10 & 16 bar � -10°C to 120°C

RESILIENT SEATNON-RISING STEM / TYPE Z-5X

� Cast Iron / Ductile Iron � Rubbercoated disc � Epoxy resin painted

internal & external surfaces � ANSI /AWWA C509-94 for water supply, fire

protection & sewage � 40mm to600mm � Flanged end connections

� Rated 10 & 16 bar � -10°C to 120°C

GROOVED END BUTTERFLY� Victaulic � UL / FM approved for fireprotection � Rated 300 psi � 50mm to 300mm

CAST IRON / GA14 / 701A / 703A / 754A723A / 762U / 722G

� Turnflo Gate Valves - Rising & Non-RisingStems � Turnflo Check, Strainer & Dual Flap

Checks � Glen Ball Valves

IND

UST

RIA

L VA

LVES

��

��


ACTUATION & CONTROLS ��

Onesteel offers it’s customers actuation services including:� Sizing and specifying the most appropriate actuator � Supply of valve and actuator withcomplete instrumentation to users’ specifications � Ex-stock deliveries of various actuated ball& butterfly valve packages stocked centrally � Manufacture of mounting kits & drive adaptors� CAD drawings for assembled valve packages, preliminary & as-built � Design & supply offailsafe systems, control cabinets and panels � Fitting, instrumentation and testing

ACT

UAT

ION

& C

ON

TRO

LS

TOTAL PROJECTCAPABILITIES

Onesteel, working with a number of actuator companies, can providean actuation solution for most sizes and types of valves. Valvesoperated by any of the actuators listed below can be supplied.

ACTUATION ACCESSORIES

• Mounting Brackets• Solenoid valves & limit switches• Multi-voltage: General purpose,

intrinsically safe & explosion proof • Pneumatic & electro-pneumatic

analogue & digital positioners forquarter turn & linear operation

• Breather blocks / closed loop piping• Speed controllers• Visual beacon indicators• Filter/pressure regulators• Block & vent valves• Air accumulator tanks

VALVE TYPEGATEKNIFE GATEGLOBEBALLBUTTERFLYDAMPERPLUGDIAPHRAGM

ACTUATOR TYPEQUARTER-TURN PNEUMATIC RACK & PINIONQUARTER-TURN PNEUMATIC SCOTCH-YOKEQUARTER-TURN HYDRAULICLINEAR PNEUMATICLINEAR HYDRAULICGAS OVER OILHIGH PRESSURE GASSUB-SEAQUARTER-TURN ELECTRICMULTI-TURN ELECTRICELECTRO-HYDRAULIC

PNEUMATIC

• Quarter turn• Rack and pinion & Scotch-yoke• Spring return (fail close or fail open)• Manual overide option• Double Acting• ISO 5211 & NAMUR interface• Linear cylinder double acting

HYDRAULIC

• Hydraulic (water or oil)• Gas over Oil

ELECTRIC

• Quarter turn• Multi-turn for linear operation• General service or explosion proof• On/Off or modulating control• Multi-voltage• Fail-Safe Electro-Hydraulic

DUTYON / OFFMODULATINGREGULATINGFAIL SAFE


��

��

EMICO EA305A Ball Valve� Fitted with El-O-Matic ES SeriesSpring Return Pneumatic Actuatorfor the Gas market

KITZ 300UTAM-FS(C) &300UTBZM-FS(C)

Stainless Steel Ball Valves� Fitted with Motivact Stainless

Steel Spring Return PneumaticActuator & Instrumentation for

the chemical industry and allhostile environments

KITZ 150SCTAM-FS N (C) Ball Valve� Fitted with Bettis CBA Series Spring Return Pneumatic

Actuator and instrumentation for the Gas market


KITZ 150UTBZM-FS N(C) Ball Valve� Fitted with El-O-Matic HDXExplosion-Proof Limit Switch

KITZ 300SCTAM-FSN(C) Ball Valve

� Fitted with DeadmanHandle for quick-

acting, spring-assistedclosure

ACT

UAT

ION

& C

ON

TRO

LS


SRI Class 600 A90RL Trunnion Ball Valve� Integrally Forged Pups with Buttweld

ends fitted with Bettis CBA DoubleActing Pneumatic Actuator, Gas

Reservoir and Instrumentation forFail-Safe operation in the event of

system gas failure

SRI Class 1500 A90RL Trunnion Ball Valve� Fitted with Bettis G5020.4 Spring ReturnHydraulic Actuator & Instrumentation for Gastransmission � Actuator NAS Cleaned for usewith McDermaid HW525 Hydraulic Oil

TURNFLO T3CS32Wafer Butterfly Valve� Close coupledwith El-O-MaticDouble ActingPneumatic Actuatorand El-O-MaticPosiflex F20Electro-PneumaticPositioner (4-20 mA)for control application

KITZ 300SCTAM-FS N(C)Ball Valve

� Fitted with El-O-MaticES Series Spring ReturnPneumatic Actuator for

the LPG market

TURNFLO T3CS32Wafer Butterfly Valve� Close coupled withTurnflo Double ActingPneumatic Actuatorfor process industry,water treatment, etc.


��

��

ACT

UAT

ION

& C

ON

TRO

LS


��

��

��

ACT

UAT

ION

& C

ON

TRO

LS ACTUATION & CONTROLS ��

SRI Class 900 A90RL Trunnion Ball Valve� Fitted with Bettis G3016 Spring ReturnPneumatic Actuator and Instrumentation

� Actuator fitted with Stainless SteelRelief Valve to ensure maximum

operation pressure is not exceeded� Valve painted Ti-tree Green, Actuator

P.O.Red to customer specifications

SRI Class 600 A90RL Reduced PortTrunnion Ball Valve

� Fitted with Bettis CBA Double ActingPneumatic Actuator and Stainless Steel

Instrumentation including Double CoilExD Solenoid, FRG, Air Lock 3-Way Valve

& Westlock Limit Switch � Actuatedpackage blast & primed Inorganic Zinc

Silicate

Kitz Class 600 Floating Ball Valve� Fitted with Bettis CBA Double ActingPneumatic Actuator and Stainless SteelInstrumentation. Other details as below

Full Documentation / Vendor Data including Assembly Drawings, Bills of Material, Material Test Reports,Non-Destructive Testing, Electrical Certification, Function Tests, etc. is available per customer project requirements

QUALITY ISO 9001 / ISO 9002

PRICE HIGHLY COMPETITIVE

TECHNICAL EXPERTISE DEDICATED TEAMS IN ALL BRANCHES

AVAILABILITY 24 HOUR SHIPMENT / ON TIME DELIVERY

ASSISTANCE 24 HOURS / 7 DAYS A WEEK

SERVICE WE ARE COMMITTED TO MEETING YOUR NEEDS

WE OFFER:

For information on Onesteel’s actuation program,please refer to Actuation Product Profile (Doc Ref 076)

Onesteel has taken reasonable care to ensure accuracy of the material in this ‘Product Profile’ but you should not rely on the whole or any partof the information which is subject to change without notice for reasons including error rectification, product discontinuation and new productintroduction. OneSteel expressly disclaims all liability whatsoever for (including any direct or indirect loss or damage, costs or expenseshowsoever incurred by any person) or reliance on the whole or any part of the information contained in or omitted from this ‘Product Profile’ andrecommends that you verify any information with your independent expert adviser and rely solely on that adviser’s recommendations.


LOCAL SOLUTIONS In Valve Actuation

VALVEPRODUCTPROFILE


LOCAL SOLUTIONSIn Valves and Actuation

NORGREN

BONNEY FORGE

KITZ SAUNDERS

EMICO SRI

VAAS

TURNFLO UNICOM

DeZURIK

WATTS

VICTAULIC CRANE LCM CHEROFLOW

ITAG SCORE BOHMER

BETTIS SHAFER EL-O-MATIC

BURKERT ASCO ROTORK

LUCIFER HK CONTROMATIC

¨

NEWAY

AUDCO

Onesteel Trading Limited ABN 50 007 519 646Valves & Actuation National Office:

Phone (03) 8795 2331 Fax (03) 9702 7508www.onesteel.comDo

c Re

f 066

Dec

05

desi

gn s

yste

ms

/ mel

bour

ne

Date post:	24-Oct-2014
Category:	Documents
Upload:	er-pupone-de-naza
View:	1,095 times
Download:	8 times

OneSteel Valve Product Catalogue

Documents