Online auc on machinery for the food industry in Brokstedt ... · 3 Bupi-Golser Maschinenbau GmbH...

Online auc�on machinery for the food industry inBrokstedt (DE)

Closing: 14 February 2019 from 14:00 hrs.

Viewing day:12 February 2019 from 09:00 �ll 13:00 hrs.

Address:Osterfeld 1424616 BrokstedtGermany

General terms and condi�ons of the online auc�on

Closing date 14 February 2019 from 14:00 hrs. Viewing 12 February 2019 from 09:00 �ll 13:00 hrs.Organizing Company Industrial Auc�ons BV

Looyenbeemd 115652 BH Eindhoven, NetherlandsTel.: +31 (0)40 2409 208Fax: +31 (0)40 2409 209E-mail: info@industrial-auc�ons.com

Buyers premium 18% over the highest bidV.A.T 19% over the highest bid including PremiumPickup date 21 February 2019 from 09:00 �ll 16:00 hrs.Pickup address Osterfeld 14

24616 BrokstedtGermany

Delivery instruc�ons The buyer is fully responsible for the dismantling, loading andtransporta�on of the bought lots. Industrial Auc�ons B.V. cannot acceptany responsibility unless indicated otherwise. The delivery (pick-upbought lots) will only take place on the men�oned delivery date/�me andaddress.

Payment details Before collec�on of the goods your payment has to be fulfilled. It ispossible to transfer the amount due to our account with ING-bank,account number 005033999 in Best, IBAN: NL34INGB0005033999, BIC:INGBNL2A or to our account at Rabobank, account number 157198367 inBest, IBAN: NL80RABO0157198367, BIC: RABONL2U, Gladbacher Bank AG,Iban: DE83310601818887176010, BIC: GENODED1GBM, indica�nginvoice- and customernumber.

General terms andcondi�ons of sale

On the auc�on general terms and condi�ons of the online auc�on areapplicable concerning the (possible) purchase of moveable assets,furthermore these specific terms and condi�ons.

Combina�ons All lots in a combina�on will be sold individually first. The star�ng bid ofthe combina�on is the total amount of the individual bids. Thecombina�on will open a�er all individual lots are closed. If thecombina�on is sold it overrules the individual bids, if not the individualbids are applicable.

Prolonga�on If a bid is made in the last 5 minutes the lot closes, the closing �me of thatlot will be extended with 5 minutes un�l no bids are made.

www.industrial-auc�ons.com

mailto:[email protected]

Nr Title Descrip�on Start €

1 Vemag Vemag vacuum filling machine, model: HP 30 E, number:1660086, year of construc�on: 2009,220-240/400-460/575 V, 3 Ph, 50/60 Hz, 69/63 A, 47 kW,double s/s screw, dimensions: 1300 mm x 1300 mm x2400 mm.

14500

2 Poly-Clip SystemGmbH & Co. KG

Poly-Clip System GmbH & Co. KG automa�c doubleclipper, type: ICA, number: 940, year of construc�on:2009, 400 V, 3 Ph, 50/60 Hz, 5-6 bar, calibres up to 200mm, diameter infeed pipe: 95 mm, plas�c ou�eed belt,belt width: 178 mm, total dimensions: 2200 mm x 900mm x 1950 mm.

19500

3 Bupi-GolserMaschinenbau GmbH

Bupi-Golser Maschinenbau GmbH industrial cleaner,type: J 1000, serial number: 11420, 400 V, 50 Hz, 19 A,11.3 kW, diameter rack: 870 mm, total dimensions: 1100mm x 1250 mm x 1650 mm.

1400

4 Düker REX-Fleischereimaschinen

Düker REX-Fleischereimaschinen cu�er, type: RK65 3M,machine number: 261899, year of construc�on: 1997,380 V, 50 Hz, volume: 65 liter, s/s bowl and knifes,dimensions: 1350 mm x 1100 mm x 1240 mm.

6500

5 Tipper TieTechnopack GmbH

Tipper Tie Technopack GmbH mobile automa�c doubleclipper, model: DC SV 5000, serial number: 4604.020.486,230 V, 3 Ph, 50/60 Hz, 28 A, minimum pressure: 5 bar,maximum pressure: 6 bar, plas�c ou�eed belt, beltwidth: 220 mm, total dimensions: 3050 mm x 1300 mm x1900 mm.

6700

6 CFS CFS forming machine, type: MLF-400, machine number:2215, year of construc�on: 2002, 400 V, 3 Ph, 50 Hz,17.12 A, 7.77 kW, weight: 1186 kg, double infeed screw,screw diameter: 175 mm, s/s mesh belt, belt width: 400mm, total dimensions: 2250 mm x 1100 mm x 2050 mm.

6900

7 NN plates Galvanized cage with 70 plas�c plates, dimensions plates:1075 mm x 675 mm, thickness plates: 10 mm, totaldimensions cage: 1200 mm x 800 mm x 960 mm.

190


Düker REX-Fleischereimaschinen piston filler, machinetype: FAN 30, machine number: 330720, 380 V, 50 A, 7 A,1410 rates per minute, volume: 30 liter, dimensions: 900mm x 600 mm x 1300 mm. Including 7 filling pipes.

900

10 Laska Laska cu�er, type: KU-60, number: A5416, capacity: 60liter, steel bowl, s/s knifes, dimensions: 1430 mm x 1200mm x 1250 mm, dimensions switch cabinet: 1430 mm x1200 mm x 1250 mm. Machine has electric problems.

1800

11 Meiko Meiko universal dishwasher, type: FV 130.2, serialnumber: 0059873, year of construc�on: 2014, 400 V, 3Ph, 50 Hz, 24 A, electrical power: 14.6 kW, electricalpower boiler: 12 kW, volume boiler: 15 liter, insidedimensions: 850 mm x 650 mm x 700 mm, totaldimensions: 1050 mm x 900 mm x 1800 mm.

450


12 Interroll Pallet with 10 drum motors, amongst other brandInterroll, width motors: 450 mm / 600 mm / 800 mm.

250


Pallet with Poly-Clip System GmbH & Co. KG clips, type:15/9 5 x 1.75 (+/-116.000 pieces), type: 15/8 5 x 1.75 (+/-81.000 pieces), 15/7 5 x 1.25 (+/- 40.000 pieces), 18/11 5x 2 (+/- 20.000 pieces), dimensions pallet: 1300 mm x 900mm x 1300 mm.

200

14 Marel A/S Marel A/S por�on cu�er, model: I-Cut 36, serial number:E016508, year of construc�on: 2014, 3 x 400 V, 50/60 Hz,16.5 A, 8 kW, plas�c belt, belt width: 300 mm, totaldimensions: 3250 mm x 1300 mm x 1850 mm. Includingextra knife wheel and knifes.

17900

15 Wiesheu GmbH Wiesheu GmbH heated showcase on steel table, type: T-TH, fabrica�on number: 606, year of construc�on: 2002,220 V, 50 Hz, 2.5 kW, dimensions showcase: 700 mm x500 mm x 600 mm, dimensions table: 1000 mm x 600mm x 900 mm.

180

16 Fatosa s.a. Fatosa s.a. double sha� Z-arm mixer with li�er for 200liter meat bins, type: AV 600, machine number: 133, yearof construc�on: 2007, 400 V, 50 Hz, volume: 600 liter,dimensions: 3200 mm x 1300 mm x 1650 mm.

14500

17 Maso Process-Pumpen GmbH

Maso process pump, type: SPS4, serial number:58821096, year of construc�on: 2013, dimensions: 1800mm x 700 mm x 600 mm.

3500

18 Marel Marel por�on cu�er, type: B-55, serial number: 80.0742,year of construc�on: 2008, 400 V, 3 Ph, 50/60 Hz, 10 kW,32 A, plas�c belt, belt width: (2x) 150 mm, totaldimensions: 3450 mm x 1700 mm x 1800 mm. Includingextra knife wheel.

7900

19 Stephan Stephan emulsifier, type: MCH-D60A/VST, machinenumber: 28893, year of construc�on: 1979, 380 V, 100 A,51 kW, 2950 rates per minute, dimensions hopper: 1070mm x 910 mm, total dimensions: 2200 mm x 1200 mm x1250 mm. Including pallet with knife sets and s/s pipes.

4600

20 Vemag Vemag vacuum filling machine with li�er for 200 litermeat bins, model: Robot 1000 DC, type: 126, number:1260709-1, 380 V, 3 Ph, 50 Hz, 24 A, capacity li�er: 200kg, total dimensions: 1700 mm x 1500 mm x 2250 mm.

1900

21 Inject Star Inject Star separator, type: P20, machine number: 270, 2x 380 V, 50 Hz, 8.2 kW, drum diameter: 2 mm, totaldimensions: 1800 mm x 900 mm x 1850 mm, dimensionsswitch cabinet: 550 mm x 300 mm x 500 mm.

4900

22 Wol�ing/Belam B.V. Wol�ing / Belam B.V. injector, type: MI-602-9/235,machine number: 9408-013.0003, 380 V, 50 Hz, walkingbeam, beam width: 600 mm, 230 needles, diameterneedles: 2 mm, total dimensions: 2300 mm x 1200 mm x2050 mm. Including filter, dimensions: 1400 mm x 550mm x 750 mm.

2800


24 Kilia Kilia mixer-grinder, type: AW D 114 2000S, machinenumber: 49011804, year of construc�on: 1990, 380 V,17.5/22.0 A, 8.5/11.0 kW, plate diameter: 114 mm, totaldimensions: 1100 mm x 1100 mm x 1540 mm.

2400

25 Asca Consul�ngGermany

Asca Consul�ng Germany autoclave, type: AUTOCLAVE230(G), serial number: 318/211/07, year of construc�on:2007, 230 V, 1 Ph, 22.5 kW, gas heated, working pressure:2.5 bar, capacity: 230 liter, inside dimensions: 640 mm x640 mm x 700 mm, total dimensions: 1200 mm x 1450mm x 1600 mm. Including s/s round vessel, diametervessel: 600 mm, height vessel: 700 mm and electric hoist.

5900

26 Hoegger Alpina AG Hoegger Alpina mobile double clipper, type: DC 15/12,machine number: 852000, 400 Vac, 3 Ph, 50 Hz, 8.1 A, 6bar, dimensions: 950 mm x 850 mm x 1800 mm. Electricproblems with Digitax frequency invertor.

3800

27 Vemag Vemag vacuum filling machine with li�er for 200 litermeat bins, type: HP 10, double s/s screw, diameter screw:150 mm, total dimensions: 2050 mm x 1280 mm x 2150mm.

6900

28 Tipper Tie Alpina AG Tipper Tie Alpina AG automa�c double clipper, type:Swipper Compact, machine number: 857.003, year ofconstruc�on: 2007, 400 V, 3 Ph, 50 Hz, 15 A, 7.5 kW,dimensions: 1300 mm x 1200 mm x 1850 mm.

15500

29 Poly-Clip SystemGmbH

Poly-Clip System GmbH mobile double clipper, type: FCA3415, number 37569, 380 V, 50 Hz, 4 A, 5-7 bar,dimensions: 1250 mm x 1400 mm x 2100 mm.

950

30 DMS DMS mobile cu�er on s/s frame, machine type: MK 23,machine number: 44024, 380 V, 3.0/3.7 kW, s/s bowl andknifes, volume: 23 liter, total dimensions: 900 mm x 700mm x 1250 mm. Defect.

750

31 HerbstMaschinenfabrikGmbH

Herbst Maschinenfabrik GmbH mobile planetary mixer,type: HR-S150DP, machine number: 3466/310, year ofconstruc�on: 2009, 400 V, dimensions: 1500 mm x 1400mm x 2450 mm. Including mobile s/s tub, dimensions:450 mm x 450 mm x 950 mm.

2400

32 Risco Risco vacuum filling machine with li�er for 200 liter meatbins, model: RS 4001, serial number: Q397018, year ofconstruc�on: 1998, 24/400 V, 3 Ph, 50 Hz, 6.3 kW,weight: 900 kg, dimensions: 2250 mm x 1200 mm x 2500mm. Including spare parts and filling pipes.

3800


Tipper Tie Technopack GmbH mobile clipper, model: TC1590 E-N, dimensions: 1650 mm x 600 mm x 1850 mm.

800

34 Hoegger Alpina AG Hoegger Alpina AG automa�c double clipper, type: DKF18/15, machine number: 848780, 400 V, 3 Ph, 50 Hz, 7 A,plas�c ou�eed belt, belt width: (2x) 65 mm, totaldimensions: 1300 mm x 1150 mm x 1900 mm.

4700



Düker REX-Fleischereimaschinen vacuum filling machinewith case holding device, type: RVF 55, serial number:5506311120, 380 V, 50 Hz, 3 kW, dimensions: 1300 mm x800 mm x 1700 mm.

2500


Tipper Tie Technopack GmbH mobile double clipper,type: KDCN.1899.429, maximum: 5 bar, dimensions: 1050mm x 540 mm x 1900 mm.

1400


Tipper Tie Technopack GmbH mobile double clipper,type: KDC-A, maximum: 6 bar, dimensions: 1100 mm x800 mm x 1800 mm.

1600

38 Hermann WiegandGmbH

Hermann Wiegand GmbH mobile binding machine, serialnumber: 164504, 400 V, 3 Ph, 50 Hz, diameter clearance:280 mm, total dimensions: 660 mm x 600 mm x 1400mm.

1300

39 Rudolf Schad Rudolf Schad mobile binding machine, type: E85-1, yearof construc�on: 2-1995, dimensions: 940 mm x 750 mm x1150 mm.

200

40 NN brine mixer Mobile brine mixer with centrifugal pump, volume: 150liter, total dimensions: 1150 mm x 1100 mm x 1850 mm.

950

41 Rudolf Schad Rudolf Schad mobile binding machine, type: E85-1,number: 12, year of construc�on: 5-1992, dimensions:950 mm x 500 mm x 1200 mm.

180

42 Holac Holac mobile dicer, model: HO 21 LC, number: 170.64.10,year of construc�on: 1995, 400 V, dimensions chamber:85 mm x 85 mm, total dimensions: 1350 mm x 680 mm x1050 mm. Including various grids.

1650

43 NN apron washer S/s apron washer, type: SRSI 131, year of construc�on:1994, 400 V, 1 A, 0.37 kW, length brush: (2x) 1000 mm,total dimensions: 1420 mm x 500 mm x 900 mm.

550

44 Bizerba Bizerba bandsaw, type: FK 31, machine number:1119077, 220/380 V, 50 Hz, 7.0/4.2 A, dimensions table:730 mm x 750 mm, total dimensions: 730 mm x 750 mmx 1600 mm. Missing saw.

450

45 Bastra Bastra cooking vessel, type: 110\3, fabrica�on number:17981, year of construc�on: 1993, 22.3 kW, volume: 300liter, set up for: Prop-But, pressure: 50 mbar, powerconsump�on: 1.74 kg/hour, total dimensions: 1100 mm x1300 mm x 1000 mm.

500

46 Bastra Bastra cooking vessel, inside dimensions: 600 mm x 800mm x 400 mm, total dimensions: 900 mm x 1400 mm x2700 mm.

500

47 Maja Maja flake ice machine, type: RVH 400 CO2D, serialnumber: I-44537, year of construc�on: 2014, 400 V, 3 Ph,50 Hz, refrigerant: R774, dimensions: 1350 mm x 700 mmx 900 mm.

2500

48 Ekco Ekco press, type: HDE10, machine number: 1085085,dye: 145 mm x 95 mm, total dimensions: 600 mm x 550mm x 1500 mm.

250


49 NN ne�ng machine Ne�ng machine, dimensions: 700 mm x 510 mm x 1320mm.

550

50 Busser GmbH & Co.Kg

Busser GmbH & Co. Kg immersion and coa�ng machine,type: WB 480, machine number: 980482, year ofconstruc�on: 1998, inside dimensions: 1350 mm x 300mm x 1850 mm, total dimensions: 1650 mm x 900 mm x1100 mm.

850

51 Maja Maja skinning machine, type: SAM 350, machinenumber: 318227749, working width: 330 mm, totaldimensions: 700 mm x 650 mm x 1000 mm. Missingknife.

650

52 Pökomat Pökomat injector, type: P16/320, fabrica�on number:4240, year of construc�on: 08.1999, 400 V, 3.5 A, 1500W, weight: 210 kg, plas�c mesh belt, belt width: 300 mm,total dimensions: 1450 mm x 600 mm x 2100 mm.

1900

53 Sepama�c Sepama�c separator, type: SEPA 410, serial number:107378, 400 V, 50 Hz, 6 A, 2.2 kW, drum: 5 mm,dimensions: 1300 mm x 800 mm x 1200 mm.

2300

54 Treif Treif dicer, 380 V, dimensions chamber: 84 mm x 84 mm,total dimensions: 1200 mm x 600 mm x 1000 mm.Including extra grids.

1350

55 Be�cher IndustriesInc.

Be�cher Industries Inc. trimmer, type: Whizard UN-84,serial number: 97031793, 230 V, 1 Ph, 50 Hz, 2.1 A, 250W, 2850 rates per minute, dimensions: 300 mm x 200mm x 850 mm.

150

56 Busch Busch vacuum pump, type: RC 0630 B 463 ZZZZ, number:C0629000513, year of construc�on: 2006, p: 20 hPa(mbar), capacity: 630 m³/hour, total dimensions: 1800mm x 1000 mm x 1200 mm.

1900

57 NN smoke trolleys 4 s/s smoke trolleys, Z-model, 6 floors, dimensions: 1015mm x 1015 mm x 1965 mm.

330

58 NN smoke trolley S/s smoke trolley, Z-model, 10 floors, 2 s/s racks,dimensions: 1015 mm x 1000 mm x 1950 mm.

80

59 NN smoke trolleys 2 s/s smoke trolleys, Z-model, 9 floors, each trolley 9racks, total dimensions: 1015 mm x 1000 mm x 1950 mm.

200

60 NN smoke trolleys 2 s/s smoke trolleys, Z-model, 9 floors, each trolley 9racks, total dimensions: 1015 mm x 1000 mm x 1950 mm.

200

61 Effepizeta S.r.L. Effepizeta S.r.L. blower, type: SCL 36 11, serial number:27383, 220/380 V, 3 Ph, 50 Hz, 11.1 - 6.4 A, 3 kW, 2800rates per minute, dimensions: 400 mm x 500 mm x 450mm.

250

62 NN smoke trolley S/s smoke trolley, 10 floors, 10 s/s racks, dimensions:1050 mm x 1000 mm x 2000 mm.

180

63 NN smoke trolley S/s smoke trolley, 10 floors, 10 s/s racks, dimensions:1050 mm x 1000 mm x 2000 mm.

180


64 Maurer-Atmos GmbH Maurer-Atmos GmbH mobile cooking vessel, type: FKM5704, serial number: X0276379, year of construc�on:03/05, 230 V, 50 Hz, inside dimensions: 1000 mm x 900mm x 640 mm, total dimensions: 1300 mm x 1300 mm x950 mm.

280

65 Boge Boge screw air compressor, type: SD 24-2, serial number:561240, year of construc�on: 2005, rate of flow: 3.05 m³/min, motor power: 18.5 kW, 3000 rates per minute,maximum pressure: 8 bar, last inspec�on: 25.02.2014,dimensions: 1210 mm x 850 mm x 1500 mm.

2800

66 Kaeser Kompressoren Kaeser Kompressoren pressure vessel, serial number:301880, year of construc�on: 1980, volume: 500 liter, PS:11 bar, dimensions: 900 mm x 750 mm x 2000 mm.

200

67 BSB BSB pressure vessel, volume: 185 liter, year ofconstruc�on: 1996, maximum temperature: 100 °C,minimum temperature: -10 °C, PS: 16 bar, dimensions:1300 mm x 500 mm x 700 mm.

150

68 Boge Boge screw air compressor, type: S 10, serial number:509780, year of construc�on: 2005, volume: 1.06 m³/hour, motor power: 7.5 kW, 3000 rates per minute,maximum pressure: 10 bar, last inspec�on: 05.09.2016,dimensions: 950 mm x 700 mm x 1000 mm.

1800

69 Ultratroc GmbH Ultratroc GmbH refrigera�on compressed air dryer,model: SD 0150, type: 410, serial number:994/12699/18,30 V, 1 Ph, 50 Hz, 0.48 kW, refrigerant:R134a/0.55kg, dimensions: 600 mm x 460 mm x 600 mm.

500

70 Itec Itec washing machine, type: Wash 140 E, serial number:97063024, 400 V, 50 Hz, 25 A, 1300 W, diameter drum:600 mm, total dimensions: 950 mm x 800 mm x 1550mm.

100

71 WBG-Pooling WBG-Pooling plas�c pallet box with plas�c mesh belts,various widths, amongst others: 250 mm and 700 mm,total dimensions: 1200 mm x 1000 mm x 800 mm.

120

72 NN apron washer S/s apron washer, length brush: (2x) 1150 mm, totaldimensions: 1700 mm x 500 mm x 850 mm.

90

73 NN sink S/s sink, 2 faucets, sensor control, dimensions: 1150 mmx 500 mm x 750 mm.

95

74 GermoMaschinenbau GmbH

Germo Maschinenbau GmbH clipper, plas�c mesh belt,belt width: 350 mm, dimensions: 1100 mm x 950 mm x1800 mm, including crate with parts and trolley,dimensions trolley: 550 mm x 400 mm x 600 mm.

700

75 NN tool trolley S/s tool trolley, dimensions: 1300 mm x 560 mm x 1160mm.

20

76 NN grinder Mobile grinder, plate diameter: 114 mm, totaldimensions: 900 mm x 700 mm x 1400 mm.

200

77 NN bandsaw Bandsaw, serial number: BS09-22110, dimensions sawtable: 880 mm x 720 mm, total dimensions: 920 mm x960 mm x 1850 mm.

1100


78 Townsend Townsend mobile skinning machine, foot control,working width: 500 mm, total dimensions: 900 mm x 700mm x 1000 mm.

800

79 Sealpac Sealpac trolley for dyes, type: Sealpac WWW-A7, serialnumber: 1446, year of construc�on: 2016, maximumcapacity: 400 kg, weight: 180 kg, dimensions: 1450 mm x1000 mm x 1350 mm.

1100


Tipper Tie Technopack GmbH mobile double clipper,type: DCAP-1, dimensions: 1200 mm x 800 mm x 1800mm.

900

81 Itec Itec s/s sink, type: 2026-W, number: 36778, year ofconstruc�on: 2000, 1 faucet, sensor control, dimensions:425 mm x 410 mm x 500 mm.

20

82 NN meat bin S/s meat bin, volume: 200 liter, dimensions: 650 mm x800 mm x 700 mm. New.

200


200


200


200


200

87 Rühle Rühle �ltable tumbler, diameter drum: 580 mm, lengthdrum: 480 mm, CE-cer�fica�on: 1994, total dimensions:1000 mm x 1000 mm x 1500 mm.

850

88 Weber Weber mobile skinning and derinding machine, type: ASB1000, number: 200, 380 V, 50 Hz, 1.1 kW, plas�c belt, beltwidth: 400 mm, working width: 450 mm, totaldimensions: 2100 mm x 800 mm x 1180 mm.

1200

89 Maja Maja skinning and derinding machine, machine type: VBA505, plas�c belt, belt width: 380 mm, working width: 380mm, total dimensions: 1200 mm x 900 mm x 1200 mm.Without ou�eed belt / slide.

390

90 Adelmann Pallet with 14 Adelmann ham moulds, inside dimensions:215 mm x 150 mm x 115 mm, total dimensions: (14x) 280mm x 190 mm x 170 mm.

70

91 NN cages 4 s/s cages, dimensions: (4x) 1200 mm x 830 mm x 960mm.

320


320


320


640


95 NN refrigerated worktable

S/s refrigerated work table with gastronorm bins, GEAKüba evaporator, type: FM(W)A 021 - FLACH-LUFTKUHLER ERSATZ FUR FM(W)A 20, 230 V, 1 Ph, 50/60Hz, volume: 0.28 liter, dimensions: 950 mm x 700 mm x900 mm.

80

96 Mul� Mul� dishwasher with 3 dishwashing baskets, dimensionsbaskets: (3x) 490 mm x 490 mm x 100 mm, dimensionsdishwasher: 600 mm x 650 mm x 850 mm.

130

97 Rudolf Schad GmbH Rudolf Schad GmbH mobile binding machine, type:E85-1, number: 110, year of construc�on: 10-1991,dimensions: 850 mm x 700 mm x 1200 mm.

190

98 Rudolf Schad GmbH Rudolf Schad GmbH mobile binding machine, type:E85-1, number: 77, year of construc�on: 2004, 230/400V, 50 Hz, 0.37 kW, dimensions: 900 mm x 650 mm x 1150mm.

190

99 NN pallet li�er S/s pallet li�er, fork length: 1100 mm, total dimensions:1700 mm x 520 mm x 1160 mm. Defect.

150

100 NN trolley S/s trolley, dimensions: 1530 mm x 950 mm x 1500 mm. 90

101 NN pressure vessel S/s mobile pressure vessel for foam, volume: 100 liter,dimensions: 500 mm x 600 mm x 1250 mm.

90

102 NN trolley for smokes�cks

S/s trolley for smoke s�cks, dimensions: 420 mm x 620mm x 720 mm.

30

103 NN trolley Aluminium trolley, dimensions: 1120 mm x 550 mm x 770mm.

60

104 ACS ACS s/s pallet li�er, model: ACS304, serial number:110376000/111, fork length: 1150 mm, fork width: 540mm, capacity: 2000 kg, total dimensions: 1500 mm x 600mm x 1250 mm.

150

105 NN pallet li�er S/s pallet li�er, fork length: 1150 mm, capacity: 2500 kg,total dimensions: 1500 mm x 600 mm x 1250 mm.Defect.

150

106 Kobi Plas�c pallet box with approximately 96 s/s Kobi hammoulds, dimensions ham moulds: 350 mm x 105 mm x105 mm, dimensions pallet box: 1200 mm x 1000 mm x760 mm.

530

107 NN tub Mobile s/s tub with drain, inside dimensions: 1900 mm x1000 mm x 540 mm, total dimensions: 1980 mm x 1100mm x 980 mm.

140

108 NN tub Mobile s/s tub with drain, inside dimensions: 1800 mm x880 mm x 550 mm, total dimensions: 1910 mm x 990 mmx 940 mm.

120

109 NN tub Mobile s/s tub with drain, inside dimensions: 1850 mm x850 mm x 400 mm, total dimensions: 1950 mm x 1000mm x 700 mm.

120

110 Kers�ng Kers�ng mobile shu�le conveyor, serial number: 3778,year of construc�on: 1995, 400 V, 50 Hz, s/s mesh belt,belt width: 400 mm, total dimensions: 1800 mm x 600mm x 800 mm.

690


111 NN meat bins 2 s/s meat bins, volume: 200 liter, dimensions: 650 mm x800 mm x 700 mm.

120


120


120

114 Maja Maja ice machine, type: SA100, number 8053, capacity:100 kg per 24 hour, inside dimensions: 540 mm x 500 mmx 500 mm, total dimensions: 640 mm x 650 mm x 1350mm.

280

115 Weber EistechnikGmbH

Weber Eistechnik GmbH ice machine, type: WE 115 L VB60, number: 647, year of construc�on: 1994, 220 V, 50Hz, 24 bar, refrigerant: R22, 1.2 kg, dimensions: 900 mm x710 mm x 850 mm.

1200

116 Busch Busch roots pump, type: GR500, number: 301, 500 m³per hour, dimensions: 850 mm x 280 mm x 550 mm.

700

117 Rietschle Rietschle vacuum pump, type: VFS 220.80(01), number:1956985, year of construc�on: 1998, 0.5/5.0 mbar,capacity: 220/80 m³/hour, dimensions: 1050 mm x 300mm x 500 mm.

220

118 KnechtMaschinenbau GmbH

Knecht Maschinenbau GmbH por�oning machine, type:BWA 45, serial number: 031290, year of construc�on:1990, dimensions: 1200 mm x 750 mm x 1400 mm.

290

119 NN drum S/s drum for separator, diameter perfora�ons: 3 mm,total dimensions: 270 mm x 270 mm x 380 mm.

1100

120 Loher Loher motor, type: SI 280 L 8/4/2 h, number: 5 081 580,year of construc�on: 1980, 380 V, 3 Ph, 50 Hz,101/150/260 A, 35/74/147 kW, weight: 722 kg, used forLaska 500 liter cu�er, total dimensions: 1200 mm x 800mm x 750 mm.

490

121 Technopack Technopack mobile clipper, model: TCE-A 400N,dimensions: 1150 mm x 700 mm x 1400 mm.

220


Poly-Clip System GmbH & Co. KG. mobile clipper, type:SCA 5004, number: 980/07, year of construc�on: 2007,5-7 bar, dimensions: 850 mm x 700 mm x 1750 mm.

390


Poly-Clip System GmbH & Co. KG mobile clipper, type:SFC 7034, number: 48509, 5-7 bar, roller width: 50 mmand 85 mm, total dimensions: 1300 mm x 800 mm x 1850mm.

390

124 Tipper Tie EuropaGmbH

Tipper Tie Europa GmbH mobile clipper, type:TCAF-400Z-1011-441, dimensions: 1400 mm x 800 mm x1750 mm.

580

125 MYAC MYAC mobile curing press, type: 450, machine number:50120, year of construc�on: 1986, 380 V, 50 Hz, 0.4 kW,dimensions: 1000 mm x 700 mm x 1350 mm.

140


126 Loma Systems Loma Systems metal detector, model: IQ2, serial number:DMC31216-33002, head serial number: MH01EV-33001,year of construc�on: 2003, 380 V, 3 Ph, 50 Hz, plas�cmesh belt, belt width: 300 mm, clearance: 340 mm x 98mm, including rejector and rejector bin, total dimensions:1300 mm x 1000 mm x 1200 mm.

950

127 Variovac Variovac mobile vacuum machine, type: EK 32, machinenumber: 2010, year of construc�on: 2006, 230/400 V, 1.5kW, seal length: 490 mm, dimensions chamber: 830 mm x480 mm, Busch vacuum pump, type: RA 0063 E, capacity:63 m³/hour, total dimensions: 1060 mm x 700 mm x 1150mm.

1100

128 Weboma�c Weboma�c dip tank, type: STB W-60/80-D, number:73JG1697, 400 V, 3 Ph, 50/60 Hz, s/s mesh belt, beltwidth: 540 mm, clearance: 610 mm x 400 mm, totaldimensions: 1400 mm x 1300 mm x 1350 mm.

950

129 Forma�c Forma�c forming machine, type: R2200, plas�c belt, beltwidth: 118 mm, foot control, total dimensions: 600 mm x800 mm x 670 mm.

1400

130 NN table S/s table with plas�c worktop, dimensions: 1000 mm x800 mm x 900 mm.

90

131 Yamato Yamato combina�on scale, model: TSDW-205 W, serialnumber: NW15007, year of construc�on: 2015, 230 V, 1Ph, 50/60 Hz, 6 A, maximum: 1500 gram, minimum: 1gram, belt width: (1x) 160 mm, (12x) 112 mm, totaldimensions: 1500 mm x 750 mm x 1050 mm. Including 4boxes with spare parts.

1800

132 NN injector Injector, walking beam, beam width: 410 mm, 50needles, needles: 1 mm, total dimensions: 1600 mm x800 mm x 2200 mm.

1400

133 Bizerba Bizerba weighing and labelling machine, checkweigher,type: GLM-I, number: 02176953, 230 V, 50 Hz, 2.4 A,maximum: 6 kg, minimum: 20 gram, e = d = 1 gram,Bizerba bo�om labeller, type: GLM-I, number: 02176955,230 V, 50 Hz, 2.4 A, Bizerba top labeller, type: GLM-I,number: 02176954, 230 V, 50 Hz, 2.4 A, belt width: (1x)300 mm, (2x) 137 mm and (2x) 90 mm, total dimensions:2500 mm x 900 mm x 2000 mm, dimensions switchcabinet: 550 mm x 300 mm x 950 mm.

11500

134 Bizerba Bizerba weighing and labelling machine, checkweigher,type: GLM-I, number: 10306740, 230 V, 50 Hz, 2.4 A,maximum: 6 kg, minimum: 20 gram, e = d = 1 gram,Bizerba bo�om labeller, type: GLM-I, number: 10300819,230 V, 50 Hz, 2.4 A, Bizerba top labeller, type: GLM-I,number: 10300820, 230 V, 50 Hz, 2.4 A, belt width: (1x)300 mm, (2x) 137 mm and (2x) 90 mm, total dimensions:2500 mm x 900 mm x 2000 mm.

11500


135 Variovac Variovac double chamber vacuum machine, machinetype: DK 31/31, machine number: 2307, year ofconstruc�on: 2007, 230/400 V, 6 kW, seal length: (2x) 815mm, dimensions chamber: (2x) 820 mm x 920 mm, Buschvacuum pump, type: RA 0250 D 561 QMXX, number:C0744000407, year of construc�on: 2007, capacity: 250m³/hour, total dimensions: 2000 mm x 1200 mm x 1500mm.

3900

136 Treif Treif mobile slicer, model: Puma-CE 700 EB, machinenumber: 194308.61780.5568, year of construc�on: 2004,400 V, 3 Ph, 50 Hz, 16 A, dimensions: 2000 mm x 880 mmx 1600 mm, with ou�eed belt, plas�c belt, belt width:240 mm, dimensions ou�eed belt: 1500 mm x 310 mm.

3600

137 H. Bohl H. Bohl mobile strapping machine, clearance: 320 mm x200 mm, film width: 52 mm, total dimensions: 900 mm x800 mm x 1950 mm.

1100

138 Cryovac Cryovac shrink tunnel, model: ST 544 D, serial number: M2898, year of construc�on: 1989, 380 V, 3 Ph, 50 Hz, 3 A,s/s belt, belt width: 450 mm, clearance: 420 mm x 300mm, total dimensions: 1400 mm x 800 mm x 1800 mm.

650

139 NN mixer with valve Mixer with valve, diameter tub: 450 mm, height tub: 900mm, total dimensions: 550 mm x 700 mm x 1820 mm.

170

140 Apple EngineeringLtd

Apple Engineering Ltd mobile depositor, model: MR 150,serial number: 36909, year of construc�on: 2004, 5.5 bar,dimensions: 1000 mm x 530 mm x 1550 mm.

340

141 Mul�vac Mul�vac thermoformer, type: R5200, machine number:1593/28, year of construc�on: 1998, 380 V, 50 Hz, 36 A,13 kW, dimensions dye: (3x) 365 mm x 130 mm, index:385 mm, Mul�vac ou�eed belt, plas�c belt, belt width:420 mm, serial number: 0426206280270, year ofconstruc�on: 1998, with suc�on device and pallet withparts, total dimensions: 7900 mm x 930 mm x 1900 mm.

1400

142 Bizerba Bizerba weighing and labelling machine, checkweigher,type: GLM-I, number: 02124011, 230 V, 50 Hz, 2.4 A,maximum: 6 kg, minimum: 20 gram, e = d = 1 gram,Bizerba bo�om labeller, type: GLM-I, number: 02124013,230 V, 50 Hz, 2.4 A, Bizerba top labeller, type: GLM-I,number: 02124012, 230 V, 50 Hz, 2.4 A, belt width: (2x)135 mm, total dimensions: 2800 mm x 900 mm x 2050mm, dimensions switch cabinet: 600 mm x 350 mm x1100 mm. Incomplete, missing belt.

1600

143 Townsend Townsend mobile linking and hanging line, consis�ng ofTownsend mobile linker, model: NL 14 Flexlinker, serialnumber: 5125, year of construc�on: 2002, 380 V, 3 Ph, 50Hz, dimensions: 2300 mm x 700 mm x 2050 mm andTownsend mobile hanging line, model: NL Conv, serialnumber: 5126, year of construc�on: 2002, dimensions:3550 mm x 600 mm x 1300 mm.

3900


144 Maja Maja por�oning machine, type: FP 100, serial number:44732, year of construc�on: 2004, 400 V, 3 Ph, 50 Hz, 19kW, 7.0 bar, 650 l/min, 1500 kg, dimensions forms: 750mm x 75 mm x 130 mm, belt width: 150 mm, totaldimensions: 2000 mm x 1060 mm x 1950 mm.

2600

145 Schultze & Partner Schultze & Partner compressor unit, refrigerant: R404A,Bitzer cooling compressor, type: LH 84/4V-6.2 Y,dimensions: 1800 mm x 1200 mm x 1700 mm.

550

146 Graseby Goring KerrLtd

Graseby Goring Kerr Ltd metal detector, type: TEK 21,plas�c belt, belt width: 250 mm, clearance: 295 mm x175 mm, total dimensions: 1900 mm x 850 mm x 1130mm.

800

147 Boge Kompressoren Boge Kompressoren screw air compressor, type:VLEX37R-11A, machine number: 12923, year ofconstruc�on: 1991, 37 kW, 8 bar, 4925 rates per minute,working hours: 4921 hours, dimensions: 1700 mm x 900mm x 2000 mm.

290

148 Hobart Hobart packaging machine, model: W-6430, model:P6200, serial number: 94.300038, 200 V, 50 Hz, 40 W, 0.3A, maximum weight: 6 kg, minimum weight: 40 g, e= dd=2 g, T= -3 kg, dimensions: 1600 mm x 1300 mm x 1600mm. Technical condi�on unknown.

250

149 Loma Loma checkweigher, serial number: 5268/10/36706, yearof construc�on: 11-1984, 415 V, weighing range: 100-940g, plas�c belt, belt width: (2x) 210 mm, (1x) 180 mm, lastcalibra�on: 27.07.2016, total dimensions: 2000 mm x 700mm x 1500 mm.

490

150 NN forming device Pneuma�c forming device, dimensions: 650 mm x 350mm x 100 mm.

130

151 NN table Aluminium table, dimensions: 2000 mm x 900 mm x 980mm.

60


100

153 NN smoke s�cks Dolav plas�c pallet box with 500 aluminium smoke s�cks,Y-profil, length smoke s�cks: 1000 mm, dimensions palletbox: 1180 mm x 780 mm x 750 mm.

300

154 NN meat hooks Plas�c crate with 250 meat hooks, dimensions meathook: 140 mm x 80 mm x 55 mm.

190

155 NN meat hooks Plas�c crate with 250 meat hooks, dimensions meathook: 140 mm x 80 mm x 55 mm.

190

156 Marel Marel s/s floor weighing scale with indicator, indicatortype: M2200-P02, serial number: A061875, 110-230 V,0.24 A - 0.12 A, dimensions scale: 1500 mm x 1250 mm.

390

157 Friulair Friulair air dryer, model: DFE118/AC, serial number:051009790, year of construc�on: 11.2009, 230 V, 1 Ph,50 Hz, 6.1 A, 1200 W, maximum air pressure: 15 barg,refrigerant: R134a/2.5kg, total dimensions: 1700 mm x600 mm x 1600 mm.

130


158 NN washing machine Mobile washing machine for grinder knifes and plates,inside dimensions: 450 mm x 450 mm x 600 mm, totaldimensions: 1100 mm x 880 mm x 1400 mm.

190

159 Oertzen Oertzen mobile high pressure unit, type: 316, serialnumber: 1701011, year of construc�on: 1997, 380 V, 3Ph, 50 Hz, 150 bar, maximum temperature: 70°C, totaldimensions: 950 mm x 450 mm x 800 mm. Withoutpistol.

100

160 Boekels Boekels checkweigher, type: EWK 438, number:7.89.92.06.348, year of construc�on: 1993-03, 220 V, 50Hz, wire belt, belt width: 250 mm, total dimensions: 1100mm x 1100 mm x 1840 mm.

390

161 KerresAnlagensystemeGmbH

Kerres Anlagensysteme GmbH smoke generator for woodchips, type: RE 982, fabric number: 8.2055, year ofconstruc�on: 02-2009, 400 V, 3 Ph, 1.5 kW, dimensions:550 mm x 900 mm x 1520 mm.

2800

162 AutothermMaxweiler Eifel

Autotherm Maxweiler Eifel s/s smoke generator for woodchips, type: H·S A W, number: 110, year of construc�on:1994, 220/380 V, 50 Hz, 0.08/0.7 kW, dimensions: 1000mm x 600 mm x 2000 mm.

180

163 AutothermMaxweiler Eifel

Autotherm Maxweiler Eifel s/s smoke generator for woodchips, type: AW 2, number: 656, year of construc�on:1994, 220/380 V, 50 Hz, 0.22/0.75 kW, dimensions: 700mm x 550 mm x 1900 mm.

180

164 NN racks for smoketrolleys

2 pallets with 60 racks for smoke trolleys, dimensionsracks: 650 mm x 995 mm.

480

166 Doleschal Doleschal smoke chamber for 2 smoke trolleys, type:UM2-3000K, fabrica�on number: 10609401, year ofconstruc�on: 2000, 400 V, 3 Ph, 50 Hz, 35 A, 14 kW,fric�on smoke generator, steam heated, SC-9000 controlpanel, inside dimensions chamber: 1100 mm x 2200 mmx 2050 mm, total dimensions smoke chamber: 1850 mmx 2500 mm x 3250 mm.

2900

167 NN smoke trolleys 2 s/s smoke trolleys, each trolley 5 floors, dimensions:1050 mm x 1000 mm x 2000 mm.

260

168 Ulma Ulma flowpacker, machine model: Atlanta, machinenumber: 111087, year of construc�on: 2005, 400 V, 50Hz, 8 A, 3.1 kW, seal length: 200 mm, plas�c belt, beltwidth: 300 mm, ELS labeller, type: ELSsme03-0, serialnumber: 7018, total dimensions: 4800 mm x 1200 mm x1900 mm.

2800

169 NN eleva�ng belt Eleva�ng belt, s/s frame, plas�c belt, belt width: 298 mm,eleva�ng from 1400 mm to 2200 mm, total dimensions:7300 mm x 600 mm x 2300 mm.

650


170 Karl Schnell GmbH &Co

Karl Schnell GmbH & Co vacuum filling machine withli�er for 200 liter meat bins, type: 593SE, serial number:21102, year of construc�on: 1996, 400 V, 50 Hz, 21 A,type li�er: 625, machine number: 2230, year ofconstruc�on: 1996, maximum li�ing capacity: 250 kg,dimensions: 1850 mm x 1200 mm x 2450 mm.

2900

171 Townsend Townsend linking and hanging line, type:Linkmaster Mark II-3A, serial number: 10153, 480 Vac,50/60 Hz, dimensions: 5800 mm x 1100 mm x 1800 mm.

1600

172 Berief Berief s/s cooking vessel, inside dimensions: 1200 mm x900 mm x 500 mm, total dimensions: 1500 mm x 1400mm x 1200 mm. Including s/s basket, dimensions: 1100mm x 850 mm x 480 mm.

500


500


500


500

176 Mewag Mewag dip tank, type: SA250 E, fabric number: 060027,year of construc�on: 1991, electrical heated, 3x 380 V, 50Hz, 24 kW, roller width: (2x) 275 mm, s/s mesh belt, beltwidth: 500 mm, dimensions: 1500 mm x 1100 mm x 1750mm.

210

177 NN pla�orm S/s pla�orm with stairs, pla�orm is 7 steps, dimensionspla�orm: 3400 mm x 800 mm x 2700 mm.

350

178 ETS Lagarde ETS Lagarde rota�ng autoclave, construc�on number:SA177A200, year of construc�on: 1978, capacity: 4693liter, maximum working pressure: 5 bar, maximumworking temperature: 151° Celsius, total dimensions:4900 mm x 1600 mm x 2400 mm.

4800

179 Peböck Peböck washing machine for crates, s/s chain belt, 2lanes, lane width: (2x) 430 mm, clearance washingmachine: (2x) 410 mm x 345 mm, dimensions washingmachine: 7400 mm x 2000 mm x 2350 mm, dimensionsconveyor: 5700 mm x 2800 mm x 1100 mm, s/s switchcabinet, dimensions switch cabinet: 1200 mm x 1000 mmx 320 mm, total dimensions: 10600 mm x 5700 mm x2350 mm.

4700

180 Nieros Nieros meat bin washer, year of construc�on: 1997, 400V, 50 Hz, 9 kW, dimensions: 2000 mm x 3000 mm x 2050mm.

4650


181 Mul�vac Mul�vac thermoformer, type: R7000, machine number:9117/113, year of construc�on: 1985, 380 V, 50 Hz, 50 A,18 kW, dimensions dye: 605 mm x 370 mm, film width:425 mm, total dimensions: 5400 mm x 950 mm x 1820mm.

1100

182 NN li�er for meatbins

Li�er for 200 liter meat bins, li�ing height: 1950 mm(height adjustable), total dimensions: 1400 mm x 600mm x 2600 mm. Technical condi�on unknown.

600

183 NN smoke trolleys 2 s/s smoke trolleys, 5 floors, dimensions: 1050 mm x1000 mm x 1970 mm.

260

184 NN eleva�ng belt Eleva�ng belt with dividers, s/s frame, plas�c belt withdividers, belt width: 355 mm, height dividers: 20 mm,distance between dividers: 200 mm, eleva�ng height:1000 mm, total dimensions: 2000 mm x 650 mm x 1000mm.

280


7 s/s racks for smoke trolleys, dimensions racks: 1000 mmx 900 mm.

175

186 Marel Marel roller conveyor with packaging table and s/scabinet for label printer, roller width: 300 mm,dimensions cabinet: 650 mm x 330 mm x 330 mm, totaldimensions: 2800 mm x 750 mm x 1500 mm.

110

187 NN roller conveyor Roller conveyor with packaging table, s/s frame, plas�cworktop, plas�c rollers, roller width: 330 mm, totaldimensions: 2000 mm x 760 mm x 1020 mm. Includingcrate with addi�onal rollers.

110

188 Maurer Maurer fric�on smoke generator, type: FRZ 12, serialnumber: 1276127, year of construc�on: 2004, 400 V, 50Hz, 28 A, 13.8 kW, medium: wood chips, dimensionssmoke generator: 1200 mm x 600 mm x 2100 mm,dimensions switch cabinet: 450 mm x 250 mm x 700 mm.

1700

189 NN parts for hampress

Various parts for manual ham press, diameter tubes: 100mm, 120 mm and 150 mm.

10

190 NN mesh belt Crate with mesh belt and s/s parts. 5

191 Demag Crate with Demag electric hoist, type: PK 2, capacity:250/500 kg.

90

192 NN ham moulds Various ham moulds, dimensions: 350 mm x 200 mm x140 mm, 100 mm x 240 mm x 100 mm, 340 mm x 150mm x 100 mm and 240 mm x 150 mm x 100 mm.

25

193 Treif Crate with grid sets for Treif dicer, model: Mustang 120. 120


24 s/s racks for smoke trolleys, dimensions racks: 920 mmx 1000 mm.

600

195 Jungheinrich Jungheinrich electric pallet li�er, type: EJD20, serialnumber: 90121652, year of construc�on: 2004, ratedcapacity: 2000 kg, load center distance: 600 mm, weightwithout ba�ery: 760 kg, ba�er weight: 209-231 kg, 24 V,fork length: 1200 mm, total dimensions: 2200 mm x 700mm x 1300 mm. Without ba�ery charger and key.Technical condi�on unknown.

390


196 Jungheinrich Jungheinrich electric pallet li�er, type: EJE 220, serialnumber: 90111819, year of construc�on: 2004, capacity:2000 kg, fork length: 1150 mm, total dimensions: 1750mm x 700 mm x 1300 mm. Missing keys, without charger,technical condi�on unknown.

750

197 NN tub S/s mobile tub with drain, dimensions: 1100 mm x 600mm x 850 mm.

100

198 NN tub S/s mobile tub with drain, dimensions: 1100 mm x 600mm x 850 mm.

100

199 NN tub S/s mobile tub, dimensions: 1200 mm x 600 mm x 950mm.

100


390

201 Nobleli� d.o.o. Nobleli� d.o.o. pallet li�er, type: AC 25, serial number:13032749/01202, year of construc�on: 2013, maximumli�ing capacity: 2500 kg, weight: 71 kg, fork length: 1150mm, total dimensions: 1800 mm x 550 mm x 1250 mm.

50

202 A&R VerpackungGmbH

A&R; Verpackung GmbH 2 lane denester, dimensionstrays: (1x) 230 mm x 120 mm and (1x) 165 mm x 115 mm,with ou�eed belt, belt width: 195 mm, total dimensions:3900 mm x 1400 mm x 2060 mm.

850

203 A&R VerpackungGmbH

A&R; Verpackung GmbH packaging machine, type: DLV R,fabric number: 792196, 380 V, 50 Hz, 10 A, belt width:110 mm, total dimensions: 3900 mm x 3000 mm x 1520mm.

1250

204 Krämer + GrebeGmbH & Co. KG

Krämer + Grebe GmbH & Co. KG thermoformer for hardand so� film, type: 3000, number: 721/500, year ofconstruc�on: 1994, 220/380 V, 3 Ph, 50 Hz, 25/35 A, so�film width: 420 mm, hard film width: 460 mm, dye: (2x)180 mm x 385 mm, index: 410 mm, belt width: 370 mm,with 2 labellers, total dimensions: 9200 mm x 1150 mm x1880 mm. Including 2 pallets with extra dye sets, dyes:(6x) 180 mm x 115 mm and (4x) 180 mm x 180 mm and 5crates with parts and documenta�on. Without vacuumpump.

7500

205 Demag Demag hoist, capacity: 250 kg, dimensions: 400 mm x200 mm x 200 mm.

90

206 NN meat bin S/s meat bin, volume: 200 liter, dimensions: 650 mm x800 mm x 700 mm.

60


Tipper Tie Technopack GmbH table model double clipper,dimensions: 350 mm x 500 mm x 850 mm.

900

208 Nagema Nagema depositor, serial number: 13363390, year ofconstruc�on: 1988, weight: 350 kg, dimensions: 1200mm x 600 mm x 1700 mm, steel conveyor, s/s belt, beltwidth: 80 mm, diameter cans: 75 mm, height cans: 52mm, dimensions: 2900 mm x 550 mm x 900 mm.

850


209 Cryovac Cryovac bag loader, model: BL70, serial number:A53800404, year of construc�on: 1999, 3x 380 V, 50 Hz, 8kW, 32 A, 6 bar, 550 NM³/h, bel width infeed belt: 190mm, belt width ou�eed belt: 300 mm, total dimensions:5000 mm x 850 mm x 2050 mm. Technical condi�onunknown.

950

210 NN tubs 2 s/s tubs with drain, inside dimensions: 880 mm x 880mm x 700 mm, total dimensions: 1000 mm x 900 mm x800 mm.

160

211 NN tubs 2 s/s tubs with drain, inside dimensions: 880 mm x 880mm x 700 mm, total dimensions: 1000 mm x 900 mm x800 mm.

160

212 Cyklop Cyklop strapping machine, type: SP-505, machinenumber: P-35841, year of construc�on: 1985, 220 V, 50Hz, 3 A, dimensions: 910 mm x 580 mm x 750 mm.

50

213 Indupro AG Indupro AG strapping machine, model: AKEBONOOB-500, serial number: 4114, year of construc�on: 2/93,220 V, 50 Hz, dimensions: 570 mm x 410 mm x 510 mm.

50

214 Bizerba Bizerba weighing and labelling machine, labeller type:Bizerba-GS, serial number: 1692559, year ofconstruc�on: 1999, 230 V, 50 Hz, 2.4 A, last checked:29-10-2014, belt width: (2x) 135 mm, total dimensions:2700 mm x 660 mm x 1700 mm.

2600

215 Nienstedt Nienstedt bandsaw, serial number: 9403747, year ofconstruc�on: 1994, saw width: 15 mm, dimensionssliding table: 600 mm x 450 mm, total dimensions: 1400mm x 1200 mm x 2300 mm.

950

216 Mado Mado mobile mixer-grinder, type: MEW 621, serialnumber: 9830118, year of construc�on: 1998, 400 V, 3Ph, 50 Hz, 12.4 A, 5.5 kW, 1450 rates per minute, 2 plas�cscrews, plate diameter: 98 mm, total dimensions: 1100mm x 900 mm x 1350 mm.

1650

217 Nieros Nieros mobile ham press, fabric number: 1 184,dimensions: 1630 mm x 560 mm x 1750 mm. Including 11plas�c plates, dimensions plates: 400 mm x 1600 mm.

500

218 Mosca Mosca strapping machine, model: RO-TR500, number:45156, year of construc�on: 1996, 400 V, 3 Ph, 50 Hz, 3A, 2.1 kW, clearance: 650 mm x 520 mm, strap width: 5mm, belt width: (2x) 75 and (2x) 60 mm, totaldimensions: 1250 mm x 1000 mm x 1900 mm.

500


160

220 NN sink S/s sink, dimensions: 1200 mm x 400 mm x 425 mm. 30

221 G. Mondini S.p.a G. Mondini S.p.a pocket filler, type: DTT/60 PS, serialnumber: 847/92, year of construc�on: 26-10-1992, 380 V,3 Ph, 50 Hz, 10 sta�ons, diameter: 60 mm, totaldimensions: 1400 mm x 940 mm x 1600 mm.

450



Poly-Clip System GmbH & Co. KG mobile double clipper,type: DCA 5079, serial number: 73038, dimensions: 1400mm x 900 mm x 1900 mm.

300

224 Lieder Maschinenbau Lieder Maschinenbau lidding machine, type: S1AL, serialnumber: 8290, year of construc�on: 1975, diameter lids:55 mm, total dimensions: 2700 mm x 1100 mm x 1800mm.

2500

226 NN tansport belt Transport belt, s/s frame, plas�c belt, belt width: 400mm, total dimensions: 2900 mm x 780 mm x 1100 mm.

270

229 NN eleva�ng belt Eleva�ng belt, s/s frame, plas�c belt, belt width: 300 mm,eleva�ng from 600 mm to 1400 mm, total dimensions:7500 mm x 600 mm x 1460 mm.

650

230 Kers�ng Kers�ng eleva�ng belt, machine type: PB Thermodrive,machine number: Pos.02, year of construc�on: 2018, 400V, 50 Hz, s/s frame, plas�c belt, belt width: 400 mm,eleva�ng from 970 mm to 1420 mm, total dimensions:2260 mm x 730 mm x 1700 mm.

350

232 Bastra Bastra climate controle unit used for cooling /humidifying salami and smoked sausage, type: DG 64,year of construc�on: 2012, 400 V, 3 Ph, 50 Hz, 6.5 kW,dimensions: 1100 mm x 680 mm x 1200 mm. Includingcontrol panel.

900


900


900


900

236 HerbornerPumpenfabrik

Herborner Pumpenfabrik pump on s/s table, type: HP-Unikon, serial number: A529/76, dimensions pump: 1200mm x 600 mm x 800 mm, dimensions table: 720 mm x520 mm x 550 mm.

20

237 NN cage S/s cage, dimensions: 1250 mm x 860 mm x 800 mm. 70

238 NN autoclave basketswith trolleys

8 autoclave baskets with 8 trolleys for autoclave baskets,dimensions baskets: 730 mm x 830 mm x 700 mm,dimensions trolleys: 900 mm x 600 mm x 330 mm.

320


241 Signode Signode mobile strapping machine, model: HB-4330 SF,serial number: HBX1300, year of construc�on: 01/25/08,400 V, 3 Ph, 50 Hz, 0.37/0.55 kW, plas�c belt, belt width:(4x) 160 mm, strap width: 9 mm, total dimensions: 1400mm x 800 mm x 1700 mm.

150

242 Signode Signode mobile strapping machine, model: HB-4330 SF,serial number: HB2313, year of construc�on: 11/2004,400 V, 3 Ph, 50 Hz, 0.37/0.55 kW, working hours:1921331, plas�c belt, belt width: (4x) 160 mm, strapwidth: 9 mm, roller width: (2x) 650 mm, totaldimensions: 1400 mm x 800 mm x 1700 mm.

150

243 Beko Beko oil-water separator, model: Öwamat 6, code: KT06000 00, number: 191336, exchange filter: XV KT06 AF2,dimensions: 700 mm x 700 mm x 1300 mm.

10

247 Frigopol Ernst Vogel 3 Frigopol Ernst Vogel cooling compressors, type: 300,year of construc�on: 1991, refrigerant: R22, capacity:14.3 m³/hour, dimensions: 1500 mm x 800 mm x 600 mm.

450

251 G. Mondini S.p.a G. Mondini S.p.a traysealer, model: CVS/VG.1-S SC,machine number: 2111-02/1, year of construc�on:24-06-2002, 400 V, 3 Ph, 50 Hz, plas�c belt and plas�cwire belt, belt width: 240 mm, total dimensions: 3980mm x 810 mm x 2300 mm, s/s trolley for dyes with dye:(3x) 272 mm x 130 mm, dimensions trolley: 1300 mm x800 mm x 1600 mm. Missing 1 cover

2600

252 Bosecker Bosecker power distributor, type: EV-2051, fabrica�onnumber: G02010031819, 230/400 V, 50 Hz, 32 A, 22 kVa,weight: 3.8 kg, dimensions: 350 mm x 350 mm x 250 mm.

20

253 Hoegger Alpina Plas�c crate with 6 s/s cu�er knifes for Hoegger Alpina PB500 cu�er, total dimensions: 600 mm x 400 mm x 150mm.

120

254 Kobi Plas�c crate with10 Kobi ham moulds, dimensions hammoulds: 360 mm x 105 mm x 105 mm.

100

255 Bizerba Bizerba tube rail weighing scale, type: MCI-W, number:1238876, 220/240 V, 50/60 Hz, 0.5 A, 25 VA, dimensionsscale: 450 mm x 350 mm x 200 mm, dimensions cabinet:300 mm x 250 mm x 250 mm.

160

256 NN filling pipes Plas�c E2-crate with 9 s/s filling pipes and other parts forvacuum filling machines, dimensions crate: 600 mm x 400mm x 200 mm.

60

257 NN screws Plas�c E2-crate with double screw, screw diameter: (2x)100 mm, dimensions crate: 600 mm x 400 mm x 200 mm.

150

258 NN parts for smokegenerator

Plas�c E2-crate with parts for smoke generator,dimensions crate: 600 mm x 400 mm x 200 mm.

50

259 NN ham mould S/s ham mould, inside dimensions: 220 mm x 155 mm x155 mm, total dimensions: 300 mm x 200 mm x 260 mm.

100

260 Papiers Paviot Papiers Paviot sealing machine, type: DL500 DH, serialnumber: 1 411, year of construc�on: 2004, 230 V, 50/60Hz, paper/film width: 350 mm, total dimensions: 500 mmx 400 mm x 500 mm.

150


261 NN hydraulic unit Hydraulic unit used for Magurit frozen block cu�er,dimensions hydraulic unit: 550 mm x 350 mm x 700 mm.

120

262 NN cu�er knifes 6 s/s cu�er knifes, length knifes: 305 mm. 120

263 NN plates for grinder Plas�c crate with 2 plates for grinder, plate diameter: 300mm, holes: 12 mm / 7 mm.

60

264 D-MA D-MA mobile bandsaw, dimensions saw table: 550 mm x750 mm, total dimensions: 700 mm x 750 mm x 1750mm.

450

265 Inject Star Inject Star rota�ng tumbler with switch cabinet, diameterdrum: 600 mm, length drum: 700 mm, dimensions switchcabinet: 520 mm x 250 mm x 500 mm.

600

266 NN seal machine Seal machine, 220-240 V, 450 W, seal length: 410 mm,total dimensions: 500 mm x 600 mm x 350 mm.

80

267 NN linking device Plas�c E2-crate with linking device, serial number: 79-D7-02-441, dimensions crate: 600 mm x 400 mm x 200mm.

140

268 NN clipper S/s clipper, dimensions: 600 mm x 400 mm x 350 mm. 80

269 Karl Schnell Karl Schnell filling a�achment, dimensions: 950 mm x 450mm x 140 mm.

100

270 Mühle Mühle grinder, model: Super, type: FW 98 N, platediameter: 98 mm, dimensions: 400 mm x 700 mm x 500mm. Missing knifes/plates. Technical condi�on unknown.

140

271 NN cu�er knifes Crate with 3 s/s cu�er knifes, length knifes: 630 mm. 300

272 Steinmetz Steinmetz DA-Turbo Fix part for filling and clipping,machine type: DA-89-TH, machine number: 69299,dimensions: 400 mm x 250 mm x 140 mm.

80

273 NN linking device Linking device, dimensions: 550 mm x 150 mm x 350 mm. 100

274 NN linking device Part for linking device, dimensions: 500 mm x 350 mm x200 mm.

100


190


300

277 Laska 6 s/s cu�er knifes used for Laska KU 330 liter cu�er,dimensions knifes: 420 mm x 200 mm x 30 mm.

240

278 NN cu�er knifes 6 s/s cu�er knifes used for Rex Hydro 60 liter cu�er,dimensions knifes: 260 mm x 150 mm.

120

279 NN cu�er knifes Wooden crate with 12 s/s cu�er knifes for Seydelmann325 liter cu�er, dimensions crate: 550 mm x 300 mm x220 mm.

240

280 NN cu�er knifes S/s cu�er knifes for Kilia cu�er, diameter: 500 mm. 120

281 NN cu�er knifes Wooden crate with 8 s/s cu�er knifes, length knifes: 400mm.

180

282 NN cu�er knifes Wooden crate with 8 s/s cu�er knifes, length knifes: 370mm.

180

283 NN cu�er knifes 6 s/s cu�er knifes for Hoegger Alpina 500 liter cu�er,type: PB500, length knifes: 370 mm.

150


284 NN cu�er knifes 6 s/s cu�er knifes for Hoegger Alpina 500 liter cu�er,type: PB500, length knifes: 370 mm.

150

285 NN cu�er knifes 15 s/s cu�er knifes, type: 280 120 , length knifes: 300mm and 4 take off discs for cu�er knifes.

280

286 NN cu�er knifes 18 s/s cu�er for 250 liter cu�er, length knifes: 370 mm. 200

287 Weber Carton box with large amount of knifes for Weberskinning machine, dimensions knifes: 499 mm x 20 mm x1 mm.

40

288 NN parts for shower 3 s/s parts for shower for smoke trolleys. 100

289 Bizerba Bizerba weighing scale with label printer, type: 150 A-M350 A-M, number: 10077479, maximum: 15/30 kg,minimum: 100 gram, e = 5/10 gram, Bizerba GT-CTcontrol panel, serial number: 10077448, dimensionsscale: 500 mm x 400 mm, total dimensions: 700 mm x800 mm x 1500 mm.

690

290 Inject Star 2 crates with large amount of needles for Inject Starinjector, needles: 2 mm.

180

291 Garcima S.L. Garcima S.L. dual ring gas burner, type: 400 DobleCuerpo, dimensions: 700 mm x 400 mm x 120 mm.

25

292 NN filling pipes Plas�c crate with large amount of filling pipes,dimensions crate: 750 mm x 500 mm x 200 mm.

100

293 NN fuses 3 boxes with fuses. 10

294 NN hand truck S/s hand truck for transpor�ng barrels, dimensions: 620mm x 500 mm x 1550 mm.

40


296 Anliker Anliker vegetable slicer, dimensions: 500 mm x 250 mm x530 mm. Incomplete.

60

297 Wanzl Wanzl tournique�e, serial number: 2977, year ofconstruc�on: 1997, dimensions: 1000 mm x 800 mm x1000 mm.

190

298 Jumo 2 Jumo control panels, type: PRF 100, dimensions: 190mm x 290 mm x 100 mm. One panel defect.

170

299 NN trolley S/s trolley, 2 floors, dimensions: 730 mm x 410 mm x 725mm.

30

300 NN traysealer S/s traysealer, dimensions: 570 mm x 750 mm x 600 mm.Incomplete.

350


100

302 Bizerba Bizerba slicer, 230/400 V, 3 Ph, 50/60 Hz, dimensions: 680mm x 530 mm x 440 mm.

150

303 NN table S/s table with plas�c worktop, thickness worktop: 35mm, total dimensions: 990 mm x 810 mm x 820 mm.

80

304 Bizerba Bizerba slicer, type: A 406 EB, number: 10759604, year ofconstruc�on: 2011, 230/400 V, 3 Ph, 50 Hz, 2.5/1.4 A, s/smesh belt, belt width: 250 mm, total dimensions: 1600mm x 1200 mm x 650 mm.

1300

305 NN table Aluminium table, dimensions: 1900 mm x 700 mm x 880mm.

50


306 Vemag Double s/s screw for Vemag vacuum filling machine,serial number: 919450099, screw diameter: 90 mm,screw length: 510 mm.

300

307 Vemag Double s/s screw for Vemag vacuum filling machine,serial number: 2377, screw diameter: 90 mm, screwlength: 535 mm.

300

308 Vemag Housing for Vemag vacuum filling machine, dimensions:515 mm x 320 mm x 200 mm.

200

309 Bizerba Bizerba label printer, model: E/P 8000, serial number:509840, 220 V, 50 Hz, 1.25 A, dimensions: 440 mm x 200mm x 180 mm.

60

310 MaschinenfabrikDornham

Maschinenfabrik Dornham wooden top grinder, type:MHR39D, serial number: 30032, 220/380 V, 3 Ph, 50 Hz,1.5/0.9 A, 400 W, dimensions: 400 mm x 140 mm x 140mm.

80

311 Markem Markem mobile inkjet printer, model: 5200, serialnumber: 081531, 115/200/208/230 V, 50/60 Hz,12.6/7.2/7.0/6.3 A, 1450 W, dimensions: 700 mm x 500mm x 970 mm.

60

312 Videojet Videojet mobile inkjet printer, model: EXCEL/170i, serialnumber: 021930025WD, 100-240 V, 1 Ph, 50/60 Hz, 2 - 1A, 6.9 bar, 3.4 m³/hour, dimensions: 945 mm x 650 mm x1630 mm.

390

313 Markem Markem inkjet printer, model: 5000, serial number:002630, 115/230 V, 50/60 Hz, 1600 W, dimensions: 750mm x 450 mm x 1250 mm.

60


315 GüntherMaschinenbau

Günther Maschinenbau mixer, type: GTM, machinenumber: 23020, 380 V, 10 A, dimensions: 840 mm x 200mm x 1220 mm.

160

316 NN frame for solecleaner

S/s frame for sole cleaner, dimensions: 1000 mm x 810mm x 210 mm.

40

317 NN roller conveyors 2 roller conveyors, s/s frames, plas�c rollers, roller width:350 mm, length: (2x) 2200 mm.

150

318 Soehnle Soehnle weighing scale, maximum weight: 100 kg,minimum weight: 10 kg, dimensions scale: 540 mm x 465mm, total dimensions: 670 mm x 540 mm x 1000 mm.

50

319 Fink-Service GmbH Fink-Service GmbH mobile s/s pressure vessel with plas�chose, serial number: 99 FB 0378, year of construc�on:1999, volume: 65 liter, maximum pressure: 10 bar,dimensions: 800 mm x 700 mm x 800 mm.

80

320 Dino Bremen Dino Bremen knife steriliser, inside dimensions: 400 mmx 125 mm x 600 mm, total dimensions: 710 mm x 350mm x 830 mm.

100

321 NN linking device Linking device for ar�ficial casing from Vemag linker,dimensions: 420 mm x 110 mm x 260 mm.

290


322 Max WieshauptGmbH

Max Wieshaupt GmbH burner, type: WL10-A, fabricnumber: 4043210, year of construc�on: 1994, oil:1.4-3.2, 230 V, 50 Hz, 0.2 kW, dimensions: 400 mm x 350mm x 350 mm.

30

323 NN sinks 2 s/s sinks, 1 faucet, dimensions: 400 mm x 320 mm x540 mm.

80

324 Poly-Clip System Poly-Clip System table model clipper, type: SCD 7083,serial number: 65288, 5-7 bar, dimensions: 400 mm x 200mm x 920 mm.

200


Tipper Tie Technopack GmbH table model clipper, serialnumber: TC206.6557.460, dimensions: 260 mm x 260mm x 900 mm.

120


Tipper Tie Technopack table model clipper, serialnumber: TC206.6557.460, dimensions: 260 mm x 260mm x 900 mm.

120

327 Tecna 2 Tecna balancers, year of construc�on: 2013, stroke:2000 mm, capacity: 2 - 4 kg.

40


Tipper Tie Technopack GmbH table model clipper, serialnumber: TCC400.128.168, dimensions: 170 mm x 170mm x 870 mm.

90


Tipper Tie Technopack GmbH table model clipper, serialnumber: GBT.7259431, dimensions: 200 mm x 300 mm x900 mm.

90


Tipper Tie Technopack GmbH table model clipper, serialnumber: TCN.206.012.383, dimensions: 200 mm x 300mm x 500 mm. Incomplete.

50


Tipper Tie Technopack GmbH table model clipper, serialnumber: RE220.030.193, dimensions: 200 mm x 300 mmx 900 mm.

50


Tipper Tie Technopack GmbH table model clipper, serialnumber: TCN.75.1279, dimensions: 200 mm x 300 mm x850 mm.

60

335 Nagema Nagema grinder, model: HU-1, plate diameter: 80 mm,total dimensions: 800 mm x 900 mm x 890 mm.

100

336 Vemag Vemag a�achment, type: AG 839.43, number: 839.4 3.48,year of construc�on: 2002, dimensions: 360 mm x 440mm x 130 mm.

190

337 MR Selbstklebe-Technik

MR Selbstklebe-Technik labelling machine, model: MR5270, machine number: 5067/91, 220 V, 50 Hz,dimensions: 1150 mm x 400 mm x 780 mm.

150

338 NN table S/s table, plas�c worktop, thickness worktop: 30 mm,total dimensions: 1010 mm x 1010 mm x 890 mm.

100

339 Vito AG Vito AG mobile oil filter system, model: Vito XM, serialnumber: 570, 220-240 V, 50 Hz, 1200 W, dimensions: 530mm x 500 mm x 900 mm.

1900


340 Espera S/s frame with 2 Espera label printers and control panel,printers model: ESD 103, number: 51 10 5609 /51 105499, 230 V, 1 Ph, 50/60 Hz, control panel, model: ESC903, serial number: 70 11 7465, total dimensions: 920mm x 585 mm x 1750 mm.

160

341 Hoegger NGV Hoegger NGV pasteurizing line, type: NGV-500,fabrica�on number: 06-024 NGV, year of construc�on:2007, 230/400 V, 50 Hz, 40 kW, steam: 3 bar, air pressure:6 bar, to be used for crates: 600 mm x 400 mm x 200 mm,total dimensions: 5600 mm x 2520 mm x 2900 mm,infeed and ou�eed chain conveyor, width: 410 mm,Flowserve Gestra GSD heat exchanger, fabrica�onnumber: 284/2007, year of construc�on: 2007, 118 kW, 2Lowara pumps, type: SHS 65 - 160 / 75, switch cabinet,dimensions: 800 mm x 400 mm x 2300 mm.

3900

342 CFS CFS pla�orm with stairs, type: Pla�orm, machinenumber: 5000066627 POS 54, year of construc�on: 2008,total dimensions: 4500 mm x 1850 mm x 2700 mm.

800

343 CFS CFS silo, type: SILO S 6000L, machine number:5000066613 POS.2, year of construc�on: 2008, 3 x 400 V,50 Hz, 27.88 A, 13.5 kW, total dimensions: 5220 mm x1470 mm x 2300 mm.

9500

344 CFS CFS silo, type: SILO S 6000L, machine number:5000066613 POS.1, year of construc�on: 2008, 3 x 400 V,50 Hz, 27.88 A, 13.5 kW, total dimensions: 5220 mm x1470 mm x 2300 mm.

9500

345 NN autoclave baskets 3 cages with autoclave baskets, including 3 trolleys,dimensions basket: 780 mm x 780 mm x 50 mm,dimensions cage: 855 mm x 820 mm x 1140 mm,dimensions trolley: 800 mm x 550 mm x 300 mm.

240

346 NN cooling autoclave Cooling autoclave, inside dimensions: 3820 mm x 870mm x 890 mm, total dimensions: 6100 mm x 1500 mm x1550 mm.

750

347 NN tub S/s tub with infeed hopper, inside dimensions: 3030 mmx 1030 mm x 490 mm, total dimensions: 3750 mm x 1140mm x 900 mm.

200

348 NN transport belt Transport belt, s/s frame, plas�c mesh belt, belt width:190 mm, total dimensions: 5800 mm x 800 mm x 300mm.

60

349 NN table S/s table, dimensions: 1000 mm x 1000 mm x 800 mm. 75

350 Güntner Güntner evaporator, type: S-DGN 066C/34, serialnumber: 400/462229.1, year of construc�on: 2003-02-4,16/1 bar, 95/-50°C, dimensions: 4300 mm x 2200 mm x650 mm.

500

351 NN smoke trolleys 2 s/s smoke trolleys, (2x) 10 floors, dimensions: (2x) 1000mm x 1000 mm x 2000 mm.

160

352 NN beams Approximately 18 aluminium cargo handling beams, 1000daN, length: 2450 mm.

250


General Terms of the online auc�on

Ar�cle 1. Defini�ons

Delivery: the actual delivery of the lot to the buyer or to his authorized representa�ve;

Bid: each by a user in the auc�on (for a lot) bid amount;

User: the one who has registered on the website;

User Agreement: the agreement between Industrial Auc�ons and the user;

Lot: an ar�cle, or a number of ar�cles that are auc�oned together (under one number);

Purchase Price: the amount of the highest -allocated- bid increased by the Buyers

Premium above the highest bid and the VAT owed;

Purchase Agreement: the purchase agreement between buyer and seller;

Buyer: the user to whom the lot is allocated;

Registra�on: registra�on of the user on the website by comple�ng the registra�on form

found on the website;

Specific Online Auc�on Terms and Condi�ons: besides, in addi�on to or devia�ng from

these General Terms and Condi�ons, applicable regula�ons that apply, as stated on the

website for the specific auc�on;

Alloca�on: the declara�on of Industrial Auc�ons that a lot or combina�on of lots has

been allocated by payment of the purchase price to the highest bidder. Seller hereby

irrevocably authorizes Industrial Auc�ons to assign and sell ar�cles on behalf of the

seller(s);

Auc�on: internet sales organized by Industrial Auc�ons of movable goods;

Seller: the person(s) a lot is being auc�oned in whom/whose commission;

Website: website www.Industrial-Auc�ons.com, which is maintained by Industrial

Auc�ons, based in Oirschot;

Ar�cle 2. Applicability

2.1 These General Terms and Condi�ons apply both to the rela�onship between sellers

and Industrial Auc�ons, as the rela�onship between users/buyers and other third

par�es on the one hand and on the other hand Industrial Auc�ons. These condi�ons

therefore apply to (being) organized auc�ons by Industrial Auc�ons and through the

par�cipa�on in auc�ons by users and/or buyers.

2.2 The applicability of other General Condi�ons than the present, and (where

applicable) the Specific Online Auc�on Terms and Condi�ons is excluded.

Ar�cle 3. Registra�on on the website and the use

3.1 By registra�on on the website a user is able to follow the progress of auc�ons on the


/media/uploads/2017/08/30/terms-and-conditions-industrial-auctions.pdf

website. The user agreement is not transferable. By registra�on the user provides his

personal details to Industrial Auc�ons and chooses his own password to access the

website.

3.2 Industrial Auc�ons confirms the registra�on by e-mail to the user on the specified e-

mail address, a�er which user can gain access to the auc�on by using his chosen

password. User is obliged to behave a�er granted access to the website and do not

inflict damage to the website or to other users. User is liable for all ac�vi�es that occur

on the website a�er that access has been gained by using the password of user.

3.3 The user guarantees the accuracy and completeness of the provided personal details

at registra�on. If the personal details change at any �me, the user is obliged to inform

Industrial Auc�ons by return of such change(s).

3.4 Industrial Auc�ons reserves the right to refuse registra�on and to terminate

unilaterally, without giving a reason.

3.5 Industrial Auc�ons takes obtained personal data in records kept for that purpose.

Through registra�on on the website, the user gives consent to the use and the storage

and processing of the personal data recorded.

3.6 The user is forbidden to reproduce the website or any part thereof or make available

(through deep linking or otherwise) without the prior wri�en consent of Industrial

Auc�ons. Intellectual property is retained by Industrial Auc�ons.

3.7 By (one-off) registra�on user accepts these General Terms and Condi�ons each �me

that user logs on to the website and whether or not bids.

Ar�cle 4. The auc�on

4.1 Industrial Auc�ons reserves the right to cancel an auc�on earlier than reported on

the website or to extend one. In case of a technical malfunc�on of the website, causing

it not complete and/or inaccessible to all users, Industrial Auc�ons reserves the right to

extend the auc�on.

4.2 The effec�veness of the internet and its website depends on many factors and many

others. Industrial Auc�ons is not in control of many factors and can accept no liability for

things they are not in control off. User and seller declare themselves familiar with and

agree with the special circumstances of an internet auc�on and with the technical

imperfec�ons that can arise. Industrial Auc�ons must therefore limit its liability. For

example, it may involve down�me, interrup�ons, delays in the connec�on,

maintenance, updates, viruses, limited accessibility, et cetera et cetera. Industrial

Auc�ons is not liable for any damage that might result therefrom.

4.3 Industrial Auc�ons hereby exclude to both the user and the seller any liability for any

damage directly and/or indirectly, in any way arise, including but not limited to the

damage arising from the use of the website, unless there is intent or willful recklessness

of Industrial Auc�ons.

4.4 Industrial Auc�ons also accepts no liability for any damage whatsoever that arises in


any way by and/or arising from:

- Ac�ons by the user that may have been prompted by informa�on placed on the

website;

- The impossibility of using the website (completely) and/or another malfunc�on in the

website or the suppor�ng system;

- The failure of the lots to the specifica�ons as reported on the website;

- The fact that the informa�on on the website is incorrect, incomplete or out of date;

- Errors in the so�ware and/or the suppor�ng system of the website;

- The unlawful use of systems, including the website of Industrial Auc�ons by a third

party;

- Acts of the seller a�er the user has concluded a purchase agreement;

4.5 Industrial Auc�ons organizes online auc�ons on behalf of sellers. She does not sell

own products. Industrial Auc�ons reserves the right to cancel an auc�on, earlier than

reported on the website, or to extend one.

Ar�cle 5. Security

5.1 Industrial Auc�ons strives to secure its systems against loss of data and/or any form

of unlawful use and takes appropriate technical and organiza�onal measures, including

taking into account the state of the technology.

5.2 Industrial Auc�ons is not liable for loss of data, damage to files, unlawful access to

computers or files, viruses spread via the website or other unlawful programs or files or

any other consequence of the use made of the website.

5.3 The website may contain links to other websites. Industrial Auc�ons has no control

over such sites and is not responsible for the content of those sites.

Ar�cle 6. Descrip�on lots

6.1 Industrial Auc�ons and the person on whose behalf the lot will be auc�oned strive

to achieve the greatest possible accuracy and clarity of the descrip�on of a lot on the

website, auc�on catalogs, other auc�on brochures, adver�sements and such, without

any liability for damages arising from incorrect or incomplete descrip�ons or other

damage.

6.2 Pipes, cables and/or other connec�ons for energy, control or produc�on that are

located on/in a lot are to be, unless expressly stated in the Specific Online Auc�on Terms

and Condi�ons stated, only sold to the first valve, fi�ng or aplied mark. Underground or

built-in connec�ons never are part of the lot, unless explicitly stated otherwise in the

Specific Online Auc�on Terms and Condi�ons.

Ar�cle 7. Adjustments; opera�on

7.1 If and insofar as any clause of these General Terms and Condi�ons is invalid or


unenforceable, the remaining clauses of these General Terms and Condi�ons will remain

valid. Industrial Auc�ons will then adopt a new clause to replace the invalid/annuled

clause, as far as possible the scope of the invalid/annuled clause shall be respected.

7.2 Industrial Auc�ons can, in addi�on to these General Terms and Condi�ons, declare

the Specific Online Auc�on Terms and Condi�ons applicable. They are therefore already

accepted by the user. In case of contradic�on prevails the clause of the Specific Online

Auc�on Terms and Condi�ons over the clause in these General Terms and Condi�ons.

7.3 The present General Terms and Condi�ons may be deviated only when this is

s�pulated in wri�ng by an authorized representa�ve of Industrial Auc�ons.

7.4 Industrial Auc�ons reserves the right to modify these General Terms and Condi�ons.

Changes take effect 24 hours a�er an e-mail is communicated to the user or if they

(digital) have been accepted comes into effect.

Ar�cle 8. Auc�on organiza�on by Industrial Auc�ons

8.1 The organiza�on, prepara�on and execu�on of the auc�on lie with Industrial

Auc�ons.

8.2 Industrial Auc�ons has the authority before, during or a�er the auc�on without

assigning any reasons:

- Not to recognize a bid as such;

- To exclude one or more users from the auc�on;

- To consolidate ar�cles into lots, to split lots and take lots from the auc�on;

- To repair mistakes made by Industrial Auc�ons in bids and/or alloca�ons, without a

user is able to make use of these errors and/or derive any rights from them;

- Lots whether or not to allocate;

- To implement other, in the opinion of Industrial Auc�ons, useful or necessary measures

or changes;

8.3 Industrial Auc�ons is authorized before par�cipa�on in certain auc�ons and/or bids

on certain lots to require prior, from the user, a bank guarantee or other form of security

to the choice and sa�sfac�on of Industrial Auc�ons (to be judged by Industrial Auc�ons)

8.4 The judgment of Industrial Auc�ons concerning what has taken place before, during

or a�er the auc�on, is binding.

Ar�cle 9. Bid; Purchase Agreement

9.1 The user can place a bid on the website on one or more lots. Every bid is

uncondi�onal, irrevocable and without reserva�on. Industrial Auc�ons and/or the seller

is/are en�tled, without giving any reason not to accept bids. Bids are placed exclusive

buyers premium and VAT. Industrial Auc�ons is authorized to place bids on behalf of

third par�es.

9.2 If a lot is accompanied by one or several other lots as a combina�on in auc�on this


shall be indicated on the page of the individual lot. In that case, there can be placed bids

first on the individual lots of the combina�on and a�er the closing of all individual lots,

offered on the combined lot. Individual lots can be allocated only if the total amount of

the highest sustainable bids on the individual lots is higher than the highest sustainable

bid on the combina�on. The combina�on will be allocated solely if the highest

sustainable bid on the combina�on is higher than the total amount of the highest

sustainable bids on the individual lots.

9.3 Bids can be placed in the form of a "sta�c bid" or a "proxy bid". In a sta�c bid, the

user places a bid in the form of a fixed amount per lot. In a proxy bid the user indicates

the maximum price he is willing to pay for the lot. The auc�on system then ensures that,

a�er outbidding by a third party, in the name of the user, the minimally possible higher

bid is introduced, as long as the maximum indicated by the user has not been reached. A

proxy bid can only be disabled by the user by placing a sta�c bid that at that moment is

the highest bid.

9.4 The purchase agreement arises through alloca�on. Alloca�on is generally given to

the user who has made the highest bid. By applying the clause of ar�cle 9.1, through

condi�ons for alloca�on as included in the Specific Online Auc�on Terms and Condi�ons

or for other reasons at the discre�on of Industrial Auc�ons may be allocated to a

different user than the user who has placed the highest sustainable bid instead.

9.5 The buyer will get within 48 hours a�er the auc�on has been closed, at least as

quickly as possible (Saturday, Sunday and holidays not included) confirmed by e-mail on

behalf of the seller(s) that the purchase agreement has been concluded. If the user does

not get an e-mail within the period men�oned above, this means that his bid has not

been allocated. Industrial Auc�ons reserves the right not to allocate or to allocate under

suspensive condi�on(s).

9.6 The risk of the lot(s) is transferred from the seller to the buyer at the moment of

alloca�on. The seller is up to the alloca�on obliged to properly insure the goods and

maintain properly insured against fire, explosion and water damage and the�. Seller is

also obliged to take out adequate insurance and liability insurance and maintain so. The

policies and the proof of premium payment of these insurances (or at least copies of

them) must be provided by seller on first request to Industrial Auc�ons.

9.7 Industrial Auc�ons is not a party to the purchase agreement but merely mediates in

the crea�on of purchase agreements between buyer and seller. Its content is always

precisely defined. Seller and buyer realize there on the part of Industrial Auc�ons may

involve a conflict of interest. Buyer and seller hereby give permission to Industrial

Auc�ons for simultaneously serving (the interests of) the buyer and seller.

9.8 If there is a forced sale, this will be stated in the Specific Online Auc�on Terms and

Condi�ons.

9.9 In the event seller is a trustee in his capacity as receiver, ar�cle 7:19 Civil Code


applies.

9:10 If the auc�on takes place in the presence of a notary or bailiff, he will supervise the

auc�on and the bids placed there and alloca�ons.

Ar�cle 10. Guarantees, claims and indemni�es

10.1 Industrial Auc�ons sells third party products, for third par�es. Seller and buyer

realize that Industrial Auc�ons is unaware or may be of the nature, condi�on or similar

of the sold. Industrial Auc�ons and/or the seller provide regarding the lots and possible

claims of third par�es to these, no warran�es of any kind. Buyer waives all rights which

do not belong to the buyer under mandatory law.

10.2 The lots are sold in the state in which they exist on the date of alloca�on with all its

possible defects, benefits and burdens. Industrial Auc�ons and/or seller give in no

indemnity for visible or hidden defects or warranty in connec�on with completeness,

numbers, func�oning, usability, saleability, the existence or absence of rights or claims

of third par�es and or the possibility of transfer to third par�es. Defects of whatever

kind, disappointed expecta�ons of the buyer and/or receiving third par�es do not

provide any en�tlement to (damage) compensa�on and/or se�lement and/or

suspension. The buyer shall be deemed to have carefully examined the lot bought by

him beforehand.

10.3 If in respect of the lots claims of third par�es arising from property reserved,

(intellectual) property rights and/or other third party rights be exercised, Buyer shall

keep the relevant lot(s) for those third party(ies), under the obliga�on to issue this first

request to that third party(ies), or otherwise to make appropriate arrangements with

such third par�es.

10.4 The seller shall indemnify Industrial Auc�ons against each claim of third party(ies).

The buyer indemnifies Industrial Auc�ons and/or the seller against each claim by a third

party in connec�on with the purchase agreement.

Ar�cle 11. Payment obliga�ons of the buyer

11.1 The buyer has the obliga�on to pay the purchase price within three days (not

including Saturday, Sunday and holidays) a�er confirma�on of the purchase agreement

on a by Industrial Auc�ons indicated account number. Payment must be made in Euros

or in another currency indicated by Industrial Auc�ons.

11.2. The buyer is not en�tled to any se�lement or suspension.

11.3 The buyer is obliged to first request to provide (addi�onal) security (such as a bank

guarantee and or pledge). The buyer hereby grants an irrevocable power of a�orney to

Industrial Auc�ons to (do) se�le rights of pledge both before and a�er delivery on

behalf of the buyer for the benefit of Industrial Auc�ons. The buyer declares to be

authorized to do so.


11.4 In case of late payment of the purchase price 15% of the purchase price, being a

fixed amount for collec�on costs and/or extrajudicial costs, will be charged to the buyer

by Industrial Auc�ons plus the statutory interest on the outstanding amount plus 3% per

year, with effect from the date the payment had to be made un�l the date of effec�ve

payment.

Ar�cle 12. Viewing days, auc�on days, pick-up days

12.1 The seller and/or Industrial Auc�ons can organize viewing days and pick-up days.

The par�es realize that Industrial Auc�ons does not have any influence or control over

the goods, the loca�on or the circumstances in which the viewing days and pick-up days

are being organized. Therefore, Industrial Auc�ons can not accept any liability. Whoever

enters buildings and/or grounds on viewing days or delivery days does so en�rely at

their own risk. It is compulsory to follow up instruc�ons given by Industrial Auc�ons

and/or by Industrial Auc�ons hired people. Industrial Auc�ons and the seller do not

accept any liability for damage arising on viewing days, or entering the buildings or

grounds or the consequences that that entails.

Ar�cle 13. Delivery

13.1 If and as soon as the buyer has met all his payment obliga�ons, the buyer may pick

up the lot(s) at the by Industrial Auc�ons determined �mes and place on presenta�on of

a proper iden�fica�on, being the delivery. The delivery is fully at the expence and risk of

the buyer. The buyer is obligated to pick up the lot(s) not later than the date specified in

the Specific Online Auc�on Terms and Condi�ons. Industrial Auc�ons can s�pulate that

(a) certain(e) lot(s) can be picked up only a�er the picking up of other lots.

13.2 Before delivery the buyer is deemed to have fully explored the lot well and buy the

lot in the condi�on in which it is. A�er the delivery the purchase agreement can no

longer be terminated or destroyed by the buyer. Pipes, cables and/or other connec�ons

that are located on/in a lot are to be, unless otherwise provided by law or Industrial

Auc�ons expressly stated otherwise, only part of the purchased up to the first valve,

fi�ng, or the applied mark. Underground or built-in pipes, cables or other connec�ons

are not part of the purchased, unless explicitly stated otherwise by Industrial Auc�ons.

13.3 If it appears that a lot can not be delivered because of claims by third par�es or

because of the fact that the delivery would cause unacceptable damage to the buildings

or premises where the lot is situated or for other reasons appears to be objec�onable

(at the discre�on of Industrial Auc�ons), Industrial Auc�ons is en�tled to terminate the

purchase agreement. This termina�on occurs by e-mail and/or registered le�er to the

buyer at the address supplied by the buyer, wherea�er Industrial Auc�ons and/or the

seller have no further obliga�on than to refund already made payments by the buyer to

Industrial Auc�ons in respect of the purchase of the lot(s).

13.4 The buyer whose lot(s) obstructs the collec�on of other lots, is obliged immediately


a�er e-mail and/or summons by Industrial Auc�ons to the address specified by the

buyer to take care of the collec�on of his lot(s), failing which Industrial Auc�ons is

en�tled to make this collec�on and possible storage happen by third par�es for the

account of the buyer.

13.5. Ownership of the goods passes a�er delivery, but not before the buyer has fulfilled

all his obliga�ons (and the seller or other third par�es have given their consent). A�er

alloca�on the buyer is obliged to properly insure and maintain properly insured against

fire, explosion, water damage and the� and to provide the insurance policy and proof of

premium payment of this insurance on first request to Industrial Auc�ons. The buyer is

obliged to respect rights of third par�es.

Ar�cle 14. Termina�on

14.1 If the buyer fails to perform any obliga�on under the agreement with Industrial

Auc�ons or the purchase agreement, including but not limited to failure to �mely or

complete payment of the purchase price; not picking up the lot(s) in �me and/or not

providing the required informa�on for delivery, finds the buyer is legally in default

without further no�ce being required, and Industrial Auc�ons may terminate the

agreement between herself and the buyer. Industrial Auc�ons may terminate the

purchase agreement on behalf of the seller. In that case Industrial Auc�ons is allowed to

assign the lot(s) to another without Industrial Auc�ons and/or the seller is/are held to

any (damage) compensa�on.

14.2 In the event of termina�on referred to in 14.1, the buyer owes Industrial Auc�ons

in addi�on to the buyers premium a lump sum amount of 25% of the purchase price to

cover administra�ve, storage, insurance and transport costs, etc., undiminished the

right of Industrial Auc�ons and/or the seller to claim full compensa�on.

Ar�cle 15. Liability

15.1 Industrial Auc�ons works on loca�ons which she has no control over, with things

that are not hers. Therefore she must limit her liability, otherwise she runs too much

risk, while she herselve is not in a posi�on to limit the risks. Industrial auc�ons is not in

control of the sites, auc�ons, IT environments and auc�oned goods. The liability of

Industrial Auc�ons (if and when a�er applica�on of the other provisions of the contract

s�ll remaining) is at all �mes and in all cases limited to the amount to which the liability

insurance of Industrial Auc�ons in a given case en�tlement to benefits. If Industrial

Auc�ons is uninsured, the insurer will not cover grants or for whatever reason, no

payment takes place, then the liability of Industrial Auc�ons in any case is limited to €

5,000.00. Any claim on Industrial Auc�ons (both property law and contract law), is not

transferable or to encumber. This limita�on does not apply to intent or gross negligence

of Industrial Auc�ons.


15.2 Industrial Auc�ons is not liable for any indirect or consequen�al damages.

Compensa�on for indirect damage is excluded at all �mes and in all cases, including at

least but not limited to consequen�al damages, lost profits, lost savings and damage due

(corporate) stagna�on, loss of goodwill, loss of data, and such. Furthermore, any liability

of Industrial Auc�ons is excluded in connec�on with any defect of the lot(s) or in respect

of (alleged) infringement of the rights of (the intellectual property of) third par�es. The

buyer declares that he acknowledges that in respect of the lot(s) possibly rights (of

intellectual property) rest with third par�es.

15.3 Industrial Auc�ons and the seller are not liable for:

- Damage to persons or property or business prior to the closing of the purchase

agreement or prior to alloca�on arising or resul�ng;

- Damage to on, through or in connec�on with the purchased goods caused (including

the loss of the good itself);

- Visible and invisible defects. The buyer is required to do research. If the buyer neglects

that, then the consequences are for the buyer;

- Damage caused by environmentally harmful substances in or on the purchased;

- Damage caused by computer failures (both in terms of hardware, so�ware, viruses,

files, internet, all in the broadest sense);

- Damage caused by power of disposi�on of the seller or rights of third par�es which

causes damage to the buyer;

15.4 In engaging third par�es Industrial Auc�ons will always exercise due care. Industrial

Auc�ons is not liable for any shortcomings of these third par�es. For that the seller and

the buyer safeguard Industrial Auc�ons.

15.5 Any right of the buyer or the seller shall expire two months a�er the alloca�on,

notwithstanding the provisions to art. 6:89 BW.

Ar�cle 16. Applicable law

16.1 All agreements between Industrial Auc�ons and third par�es is governed by Dutch

law.

16.2 The Dutch text of the General Terms and Condi�ons is the original text. If the

General Terms and Condi�ons are used in several languages, the Dutch text will

therefore be given preference in case of ambigui�es or contradic�ons.

16.3 In the event of a dispute, the competent court within the district of “Oost-Brabant”

has jurisdic�on to hear the dispute, notwithstanding the competence to Industrial

Auc�ons to submit a dispute to the competent court according to the law.


Notes


Address: Looyenbeemd 11

5652 BH Eindhoven, NetherlandsTel.: +31 (0)40 2409 208 Fax: +31 (0)40 2409 209 Email: info@industrial-auc�ons.com Web: www.industrial-auc�ons.com

Upcoming auc�ons:06-03 Online auc�on fish processing machinery due to reloca�on of

Larsen Danish Seafood GmbH in Bremerhaven (DE) 12-03 Online auc�on machinery for the food industry on behalf of

Windsor Food Machinery Ltd in Ashford (UK) 13-03 Day 1: Online auc�on machinery and inventory due to closing

produc�on loca�on FrieslandCampina Gütersloh (DE) 14-03 Day 2: Online auc�on machinery and inventory due to closing

produc�on loca�on FrieslandCampina Gütersloh (DE) 19-03 Online auc�on machinery and inventory on former loca�on

Vion Food Group in Wunstorf (DE) 04-04 Online auc�on machinery and inventory due to

discon�nua�on of ac�vi�es apple processing companyDelipom in Benschop (NL)

01-05 Online auc�on machinery and inventory on behalf of CSKFood Enrichment in Ede (NL)


mailto:[email protected]

https://www.industrial-auctions.com

Date post:	03-Mar-2021
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Online auc on machinery for the food industry in Brokstedt ... · 3 Bupi-Golser Maschinenbau GmbH...

Documents