A Hilco Global CompanyVested in Your Success
Featuring Aluminum Cold Chamber
Die Casting Machines, Furnaces, CNC Robots,
Hydraulic Trim Presses, & Auxiliary Equipment
Complete Cold Chamber Aluminum
Die Casting Facility
Online Bidding Opens: Wednesday, October 15th
Online Bidding Closes: Wednesday, October 22nd
Rome, Georgia
ONLINE AUCTION
Phone +1 248-254-9999
www.hilcoind.comwww.diecastmachinery.com
Sale Offered in Partnership with
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2
ONLINE AUCTIONHilcoTM Industrial
ONLINE BIDDINg OPENS
WEDNESDAY, OCTOBER 15TH
BEGINNING AT 10AM LOCAL TIME
ONLINE BIDDINg CLOSES
WEDNESDAY, OCTOBER 22ND
CHeCk www.HIlCoInd.Com For ClosInG tImes
PREVIEwMONDAY, OCTOBER 20TH THRUWEDNESDAY, OCTOBER 22ND
9AM TO 4PM LOCAL TIME to sCHedUle An eArlIer InspeCtIon, pleAse ContACt ed CerVAC At 847-849-2935, [email protected] or tIm pFIster At 847-313-4747, [email protected]
ASSET LOCATION29 WESTSIDE INDUSTRIAL BLVD NWROME, GA 30165
DIRECTIONSFROM HARTSFIELD-JACKSON ATLANTA AIRPORT: EXIT AIRPORT TO I-85 N. CONTINUEON TO I-75 N TO GA-20 W (EXIT 290) AND TURN LEFT ONTO GA-20 W to US-411 S / US-41 N.TAKE THE US-411 S / GA-20 W RAMP TO ROME, AND MERGE ONTO US-411 S. FOLLOW TOSTATE LOOP 1 AND TURN RIGHT. TURN LEFT ONTO REDMOND CIR AND THEN TAKE THE 3RDRIGHT ONTO WESTSIDE INDUSTRIAL BLVD.
FURTHER INFORMATION• AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS. THE BUYER’S
PREMIUM WILL BE REDUCED TO 16% FOR PAYMENTS MADE BY MEANS OFCASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARANTEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AUCTIONWILL BE CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.
• REMOVAL DEADLINE IS TUESDAY, NOVEMBER 11th WITH HOURS OF REMOVALBETWEEN 8AM TO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ONSITE AFTER DEADLINE ARE SUBJECT TO FINES OF $500 PER DAY.
MACHINERY & EQUIPMENT
ED CERVAC 847-849-2935 • [email protected] PFISTER 847-313-4747 • [email protected] INFORMATION
LESIA JOSEPH 616-328-6892 • [email protected] ACCOUNTS RECEIVABLE AT [email protected] SERVICE
+1 877-37-HILCO • +1 616-732-1800 • [email protected] NEELY AT 248-254-9999 X16 • [email protected]
Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to
date, sale process, terms and conditions and list of available assets.
(13) DIE CAST MACHINES
For more information, please visit us on the web at www.hilcoind.com 3
(13) DIE CAST MACHINES
(13) DiE CAsT MACHiNEs1 – PRINCE MODEL 1246 CCA 1200 TON HORIZONTAL COLD
CHAMBER ALUMINUM HIGH PRESSURE DIE CAST MACHINE, 9.5" Tie Bar, 46.5" x 46.5" Between Bars, 24-44" Die Thickness, 30" DieStroke, 30-36" Shot Cylinder Stroke, 100hp and 15hp Motors, 36' x 9' x 13'Machine Size, 165,000lb Machine Weight, Hydraulic Motorized DieHeight Adjustment System with Individual Tie Bar Adjustment andElectronic Stain Gauge, Prince Binary II Shot Control System with Close-Coupled Piston Accumulator Bottles and Piston Bottle Intensification,Twin Cylinder Hydraulic Bumper Plate Ejection System, Twin CylinderHydraulic Bumper Plate Ejection System, Top Helper Side Automatic TieBar Puller System, Four (4) Auxiliary Hydraulic Side-Core Circuits onMoving Platen, Two (2) Circuits on the Fixed Platen
3 – LESTER MODEL HP-1200 X-SF 1200-TON ALUMINUM COLD CHAMBER DIE CAST MACHINES, S/Ns 8346, 1204, N/A, 18" – 48" DieHeight Adjustment, 10-1/4" – 30" Die Stroke (Adjustable), 42" x 42"Clearance Between Beams, 65" x 65" Moving Platen, 0 – 8" Ejector CylinderStroke (Adjustable), 30-Ton Ejector Cylinder Force, 75-HP Main Motor, withModicon PLC Controls – 112,000-Lb. Approximate Machine Weight
1 – LESTER MODEL H1200 X-SF 1200-TON ALUMINUM COLD CHAMBER DIE CAST MACHINE, S/N 8655, 65" x 65" Platen, 42" x 42"Between Posts, 18"-48" Max. Die Height, 42" Min. Die Height, 10-1/4"/30"Stroke, 75-HP Main Motor, 112,000lb Aprox Machine Weight
8 – LESTER MODEL H900 X-SF & HP900 X-SF 900-TON ALUMINUMCOLD CHAMBER DIE CAST MACHINES, 18" x 36" Die HeightAdjustment, 12" – 21" Die Stroke (Adjustable), 36" x 36" ClearanceBetween Beams, 50" x 50" Moving Platen, 0 – 8" Ejector Cylinder Stroke(Adjustable), 20-Ton Ejector Cylinder Force, 40-HP Main Motor, withModicon PLC Controls – 75,000-Lb. Approximate Machine Weight, withAdvance Products 40 Inch Multi-Link Automatic Reciprocating DieLubrication Sprayer
DIE CAST AUXILIARY EQUIPMENT • (13) 6-AXIS ROBOTS
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4
DiE CAsT AUXiLiARY EQUiPMENT5 – RIMROCK MODEL 410 60" RECIPROCATING DIE LUBRICATION
SPRAYERS, 60" Vertical Stroke, 21.7" Horizontal Stroke, Features Include:Fully Programmable Using the Auto-Teach Mode Via Triangle Controls,Motorized Horizontal Base Adjustment to Compensate for Varying Die Thicknesses, Dual Lube System, Rugged but Compact Design, TriangleControls, Second Hand
1 – ADVANCE PRODUCTS MODEL GEMINI 155 40" RECIPROCATING DIELUBRICATION SPRAYER, Includes Memory Holds 50 Programs with 20Start/Stop Set Points Each, Touch Pad HMI, Positioning Accuracy of 0.02inch/0.005 mm, 40” of Vertical Stroke with 12” of Horizontal BaseAdjustment, Toshiba Controls, Second Hand
1 – RIMROCK MODEL 405 MULTI-LINK AUTOMATIC LADLE, 43" – 73"Stroke, 75lb Capacity, Features Include: Pour Forward – Enables Ladle Armto Advance while Dipper Cup is Pouring Minimizing Metal Spills DuringPouring, Automatic Pour-Back If Cycle is Interrupted, Three Metal ProbeSystem Protects Ladle During Furnace Charging, Programmable Low MetalWarning Alerts Operator if Furnace Metal Level is Low, Triangle Controls,Second Hand
8 – RIMROCK MODEL 305 70" MULTI-LINK AUTOMATIC LADLES, 40" – 70"Stroke, 50lb Pour Capacity (Alum), 120v/1ph, 60hz, 17" Draw Down,Adjustable Cycle Speed, +/- 6 Degree Tilt of Unit, Features Include: Workson Either Operator or Helper Side of Machine – Quick, Simple Change-Over,Automatic Pour Back Feature, Simple Mechanism, Interchangeable Partswith other Rimrock Models, Rimrock Parts and Service Support, TriangleControls, Second Hand
3 – QPC MODEL HO-1210X-24 OIL TYPE TEMPERATURE CONTROLLERS,S/Ns 240001, 240003, 490001
3 – QPC MODEL QPH01210-248 OIL TYPE TEMPERATURE CONTROLLERS, S/Ns 420302, 420301, 420303
3 – QPC OIL TYPE TEMPERATURE CONTROLLERS, S/Ns 490001, N/A
5 – VISI-TRAK SHOT MONITOR CONTROL UNITS
QUANTITY OF DIE CAST AUXILIARY EQUIPMENT, Including: MaterialTransfer Pouring Pots, Sow Molds, Degassers, Die Heaters, Die Lube SprayTanks, Rimrock & Electrical Spare Parts
(13) ROBOTs8 – ABB MODEL IRB 6400 6-AXIS ROBOTS, 264lb Payload Capacity, 94.48"
Reach, 480v/3ph/60hz, Controller and Teach Pendent, Features Include:Compact Arm Design, Fast Maneuverability, Heavy Payload Capability,Renowned ABB Parts and Service, ABB Controls
3 – ABB MODEL IRB 4400 6-AXIS ROBOTS, 99lb Payload Capacity, 77" Reach,+/- 0.00276" Repeatability, with Controller
2 – FANUC MODEL S-420IF 6-AXIS ROBOTS, 264lb Payload Capacity,480v/3ph/60hz, Controller and Teach Pendent, Features Include: Low MassArm Design, High Positioning Speeds, Heavy Load Capacity, Designed for SpotWelding, Machine Loading, Extracting, Material Handling, RJ2 Controls,Second Hand
Register and Bid
Online Only at
www.hilcoind.com
(25) MELTING & HOLDING FURNACES • (21) TRIM PRESSES
For more information, please visit us on the web at www.hilcoind.com 5
(21) TRiM PREssEs1 – METAL MECHANICS MODEL 50, 50 TON FOUR POST VERTI-
CAL HYDRAULIC TRIM PRESS, 40" Daylight, 18" Stroke, 22" Shut Height, 48" x 32.5" Clearence Between Tie Bars, 58" x 42"Bed Size, Top Mounted Hydraulics, Air Safety Ratchet, T-SlottedMoving and Bed Platens, Top Mounted Hydraulics, Allen BradleyMicroLogix 1000 Programmable Solid State Control Controls
1 – K.R. 50 TON FOUR POST VERTICAL HYDRAULIC TRIMPRESS, 48" Daylight, 22" Stroke, 24" Shut Height, 48" x 25"Clearence Between Tie Bars, 59" x 36" Bed Size, T-Slotted Movingand Bed Platens, Dual Pull Out Bars, Controls
1 – KG SYSTEMS 50 TON FOUR POST HORIZONTAL HYDRAULICTRIM PRESS, 42" Daylight, 24" Stroke, 18" Shut Height, 36" x 48"Clearence Between Tie Bars, 60" x 48" Bed Size, Controls
1 – STERLING 50 TON FOUR POST HORIZONTAL HYDRAULICTRIM PRESS, 32" Daylight, 24" Stroke, 18" Shut Height, 38"Vertical x 48" Horizontal Clearence Between Tie Bars, 50" x 60"Bed Size, Hydraulic Ejector Plate, T-Slotted Moving and BedPlatens, Controls
1 – SUPERIOR 50 TON FOUR POST HORIZONTAL HYDRAULICTRIM PRESS, 40" Daylight, 24" Stroke, 16" Shut Height, 38"Vertical x 48" Horizontal Clearence Between Tie Bars, 50" x 60"Bed Size, T-Slotted Moving and Bed Platens, AutomaticLubrication, Fixed Ejector Plate, Controls
2 – CMI MODEL 99208-2 50 TON FOUR POST VERTICALHYDRAULIC TRIM PRESSES, 40" Daylight, 32" Stroke, 8" ShutHeight, 36" x 46" Clearence Between Tie Bars, 58" x 48" Bed Size,Drill & Tapped Bed and Moving Platen, Dual Palm ButtonOperation, Allen Bradley Controls
1 – K.R. 38 TON FOUR POST VERTICAL HYDRAULIC TRIMPRESS, 28" Daylight, 12" Stroke, 16" Shut Height, 36" x 24"Clearence Between Tie Bars, 22" x 16" Bed Size, T-Slotted Movingand Bed Platens, Controls
5 – STERLING 35 TON FOUR POST HORIZONTAL HYDRAULICTRIM PRESSES, 32" Daylight, 18" Stroke, 14" Shut Height,32"/40” x 30" Clearence Between Tie Bars, 42”/43"/50” x 40"/42”Bed Size, (1) with T-Slotted Moving and Bed Platens, EjectorPlate, Controls
3 – 35 TON FOUR POST HORIZONTAL HYDRAULIC TRIM PRESSES,32"/34” Daylight, 18”/24" Stroke, 14”/16”/18" Shut Height, 32"/40” x30"/32” Clearence Between Tie Bars, 42" x 40" Bed Size, Controls
1 – 35 TON FOUR POST VERTICAL HYDRAULIC TRIM PRESS, 16"Daylight, 15" Stroke, 13" Shut Height, 4" x 26.5" ClearenceBetween Tie Bars, 59" x 37" Bed Size, Two (2) Ejector Cylinder, T-Slotted Moving and Bed Platens, Dual Palm Button Operation,Top Mounted Hydraulics, Controls
3 – STERLING 30 TON FOUR POST HORIZONTAL HYDRAULICTRIM PRESSES, 32" Daylight, 18" Stroke, 14" Shut Height, 32" x30" Clearence Between Tie Bars, 42" x 40" Bed Size, (2) withMechanical Ejector Bars, (10 with Fixed Ejector Plate, T-SlottedMoving and Bed Platens, Automatic Lubrication, Hydraulic EjectorPlate, Controls
1 – 30 TON FOUR POST VERTICAL HYDRAULIC TRIM PRESS, 39" Daylight, 26" Stroke, 13" Shut Height, 30" x 27" ClearenceBetween Tie Bars, 48" x 36.5" Bed Size, Mechanical Ejector Bars,T-Slotted Moving and Bed Platens, Automatic Lubrication,Hydraulic Ejector Plate, Controls
(25) MELTiNG & HOLDiNG FURNACEs3 – MPH INDUSTRIES MODEL 62-ARH 84000 84,000-LB. REVERB ALUMINUM MELT
FURNACES, 96" Wide Opening, 4-Zones, Natural Gas, 12,000,000-BTU, with HoneywellDigital Temp Controls and Chart Reader
1 – LINDBERG MPH MODEL 62-ARH 60000 60,000-LB. REVERB ALUMINUM HOLDINGFURNACE, S/N R8098 (1997), 10,600,000-BTU, 1,500° Maximum Operating Temperature,Dual Fuel, 4-Zones
14 – MODEL RDC-4000 4000LB LOW ENERGY HIGH EFFICIENCY NATURAL GAS HEATED ALUMINUM HOLDING FURNACES, 72" x 34" x 14" Bath Size, 22" x 22" Dip-OutWell Size, Natural Gas or LPG, Features include: Honeywell Digital TemperatureControllers, Equipped with North American Combustion Equipment , Adjust height legs foreasy use with different size die casting machines or other foundry applications, Dual FuelCapable – Natural Gas or LPG, Honeywell Controls, Second Hand
4 – MODEL RDC-4000 4000LB LOW ENERGY HIGH EFFICIENCY NATURAL GAS HEATEDALUMINUM HOLDING FURNACES, 72" x 34" x 14" Bath Size, 22" x 22" Dip-Out Well Size,Natural Gas or LPG
3 – ALUMINUM HOLDING FURNACES
SHOT BLAST • CNC TURNING CENTERS • TOOL ROOM EQUIPMENT
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6
sHOT BLAsT1 – GOFF MODEL 816 DC INDEXING TWO CHAMBER SPINNER HANGER ABRASIVE
SHOT BLAST MACHINE, 36" Wide Capacity, 2 Blast Chambers and Wheels, Disa GoffDownflo Dust Collector, Single Lip Separator, Fully Lined Wheel Housing, Unique Snap-Lock Blade Design, Allen-Bradley Powerflex Controls
1 – ROSLER CONTINUOUS TUMBLE PASS-THRU SHOT BLAST MACHINE (2005),16" Tunnel, 14" Max Size Part, 15-HP, Continuous Flow Operation, Fully ProgrammableBlasting Dwell Time, Includes Rosler Wet Type Dust Collector System
1 – EMPIRE MODEL MH-3040 SHOT BLAST CABINET
CNC TURNiNG CENTERs2 – OKUMA-HOWA MODEL ACT-2SP-2 DUAL SPINDLE CNC TURNING CENTERS,
S/Ns 23808, N/A, (2) 8-Position Turrets, Chuck, Chip Conveyor and Fanuc Model OT CNCControls
TOOL ROOM EQUiPMENT1 – DEVLIEG MODEL 43K-72 SPIRAMATIC 4" JIG MILL, S/N 9381, 35" X 72" Bed,
48" Vertical Travel, with Sony Model LC10 Digital Readout
1 – DAKE MODEL 5-150 150-TON HYDRAULIC H-FRAME PRESS, S/N 171402(1975), 48" Between Posts
1 – SUMMIT MODEL 23-4/60 29" X 60" LATHE, S/N C101, 4" Hole Through Spindle,1,010-RPM and 4-Jaw Chuck
1 – LEBLOND MODEL REGAL 19" X 60" LATHE, S/N 10E143U4956 (1977), withTailstock, Tool Post and Chuck
1 – HWACHEON MODEL HL-460 18" X 60" LATHE, S/N 223534 (1995), 2" HoleThrough Spindle, 1,800-RPM and 3-Jaw Chuck
1 – HOWA MODEL 430/1500 17" X 60" LATHE, S/N 12285, 2" Hole Through Spindle,1,500-RPM
1 – VICTOR 16" X 30" LATHE, 2" Hole Through Spindle, 1,200-RPM and 3-Jaw Chuck
1 – MSC 13" X 40" LATHE, S/N 6585, 1" Hole Through Spindle, 2,000-RPM, Tail Stockand 3-Jaw Chuck
1 – ACER MODEL AGS-1632AHD 16" X 32" SURFACE GRINDER, S/N 96050438(1996), with Wheel Dresser, Filtration System, Electro Magnetic Chuck
1 – REID MODEL HR 6" X 18" HAND FEED SURFACE GRINDER, S/N 21795 (1981),with Coolant and Elctro Magnetic Chuck
1 – DEDTRU MODEL 288 CENTERLESS GRINDER, S/N 5773W, Acu-Rite DigitalReadout
1 – BRIDGEPORT MODEL SERIES LL 4-HP VERTICAL MILLING MACHINE, S/N 904, With 11" x 58" T-Slotted Table, SWI Trak A.G.E. Digital Readout
1 – MICROCUT MODEL 1050 3-HP VERTICAL MILLING MACHINE, S/N 93110, With9" x 48" T-Slotted Table, Sony Milliman Digital Readout
3 – BRIDGEPORT SERIES 1 2-HP VERTICAL MILLING MACHINES, S/Ns BR2179043 194866, N/A (To 1976), 9" x 42" T-Slotted Table, 4,200-RPM,Digital Readout
1 – MARVEL MODEL SERIES 8 MARK 1 VERTICAL BAND SAW, S/N 820120(1978), with Manual Clamping, 36 x 60 Inches Bed Size
1 – OGAWA MODEL HOR-D 5' RADIAL ARM DRILL, S/N E-1793 (1979), with PowerElevation, Power Clamp and 24 x 30 Inches Box Tables
1 – BARNES MODEL 306 VERTICAL HONING MACHINE, 30" x 30" T-Slotted Table,48" Approx. Stroke
1 – MILLER MODEL SPECTRUM 1250 100-AMP OUTPUT PLASMA CUTTING SYSTEM, S/N KG24352
1 – MILLER SYNCROWAVE 250 250-AMP TIG WELDER, S/N KC330391 (1992)
LARGE QUANTITY OF TOOL ROOM EQUIPMENT, Including: Conduit Benders,Surface & Centerless Grinders, Arbor Presses, Band Saws, Benders, Lathes, Mills,Drills, Air Guns, Lincoln, Miller & Rocklin Welders, Welding Tables & Carts, Double EndGrinders, Pipe Threaders, Pantograph Engraver, Tooling, Chucks, Rotary Tables,Power, Pneumatic and Hand Tools, Etc.
CNC EDM’s • INSPECTION EQUIPMENT • FORKLIFTS • SHOP SUPPORT
For more information, please visit us on the web at www.hilcoind.com 7
sHOP sUPPORT EQUiPMENT1 – QUINCY QT-15 15 HP HORIZONTAL AIR
COMPRESSOR, S/N 6121088
1 – IR MODEL 2475 5HP VERTICAL AIRCOMPRESSOR, S/N 02014370
1 – WHEELABRATOR MODEL DCM3400TUMBLAST SHOT BLAST MACHINE,S/N 131501
1 – WHEELABRATOR TUMBLAST SHOTBLAST MACHINE
1 – DRY ROD MODEL 16C ELECTRODESTABILIZING OVEN, 100°-550° TempRange
1 – GRIEVE MODEL H-1250-E ELECTRICOVEN, S/N 12048, Honeywell Controls
1 – K.H. HUPPERT MODEL ST ELECTRICOVEN, S/N 103
2 – ROCKLIN MODEL 600 ELECTRONICCARBIDE METAL IMPREGNATORS
1 – MARATHON MODEL V-6030HYDRAULIC BALER, S/N 66280
1 – TENNANT MODEL POWER SWEEPER265 RIDER TYPE FLOOR SWEEPER,S/N 8978
1 – MODEL SERIES 500S SHRINK WRAPMACHINE
LARGE QUANTITY OF SHOP SUPPORTEQUIPMENT, Including: Pressure Washers,Work Stations, Tool Cabinets, Cabinets, Carts,Pallet Jack, Dollies, Die Lift Carts, FlammableStorage Cabinets, Pumps, Valves, Motors,Spare Parts, Pallet Racking, Etc.
QUANTITY OF OFFICE FURNITURE ANDEQUIPMENT, Including: Desks, Chairs,Tables, Filing Cabinets, Wide Format Scanner& Printer, Various Office Machines, Etc.
ELECTRiC DisCHARGE MACHiNEs1 – CHARMILLES MODEL ROBOCUT 220 CNC ELECTRICAL
DISCHARGE MACHINE, S/N 65784 (1989), 13" x 17" Work Table,Charmilles Isopulse 80 Controls
1 – FONG HO MODEL ED 252 SINITRON RAM TYPE CNC ELECTRICALDISCHARGE MACHINE, S/N AD32558 (1984), 3R Tooling and Bausch& Lomb Model Acu-Rite III Digital Readouts
iNsPECTiON & TEsTiNG EQUiPMENT2 – GIDDINGS & LEWIS MODEL CORDAX 1808-M COORDINATE
MEASURING MACHINES, S/Ns 6427, 6437, with Renishaw PH10MProbe and PC
1 – SCHERR TUMICO MODEL 20-3500 OPTICAL COMPARATOR, S/NR912201, with Quadra-Chek 2000 Digital Readout
1 – SPECTRO MODEL SPECTROMAX CCD METAL ANALYSIS SPEC-TROMETER, S/N 31051 (2001)
1 – BAUSCH & LOMB MODEL STEROZOOM 7 STERO MICROSCOPE
1 – ROCKWELL MODEL 4 HARDNESS TESTER, S/N 1733
1 – CINCINNATI TEST SYSTEMS PRESSURE DECAY LEAK TESTER
QUANTITY OF INSPECTION AND TEST EQUIPMENT, Including: GasMeter, Gas Mixer, Combustion Analyzer, Pressure Tester, RenishawProbes, Pin Gauges & Height Gauges, Surface Plates, Micrometers, Etc.
FORKLiFTs1 – CLARK MODEL C500-S100 10,000-LB. LP GAS FORKLIFT
TRUCK, S/N 685-0156-7830K0F (1990), 2-Stage Mast, 42" Forks,(Late Delivery – TBD)
1 – ALLIS CHALMERS MODEL FP-40-24-2PS 8,000-LB. LP GASFORKLIFT TRUCK, S/N 27208054 (1963), 184" Lift Height, 2-StageMast, 36" Forks, Dual Front Tires
1 – YALE MODEL GLC050TGNUAE082 5,000-LB. LP GAS FORKLIFTTRUCK, S/N E187V11245W (1999), 189" Lift Height, 3-Stage Mast,Solid Tires, 5° Tilt (Late Delivery -TBD)
2 – CATERPILLAR MODEL GC20K 4,000-LB. LP GAS FORKLIFTTRUCKS, S/Ns AT82E90088, N/A, 131" Lift Height, 2-Stage Mast
QUANTITY OF FORKLIFT ATTACHMENTS, Including: Barrel Tippers,Fork Extensions, Jib Attachment, Etc.
HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved
Hilco Industrial, LLC Georgia Auctioneer & License: Tim Pfister License #AU003854 • GA License #AU-C002875 • IL License #444.000215
Printed in USA • ROM0460 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.
FollowUs on:
A Hilco Global Company
Vested in Your Success
OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA
HilcoTM Industrial ONLINE AUCTIONTerms of Sale
An 18% buyer's premium will be charged on all assets.The buyer’s premium will be reduced to 16% for paymentsmade by means of cash, cashier’s check, company check(with bank letter of guarantee) or wire transfer within 48hours of sale close. Everything will be sold online to thehighest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies of whichwill be posted online. All items will be sold “as is, where-is” without any warranties, expressed or implied. Althoughobtained from sources deemed reliable, the Auctioneermakes no warranty or guarantee to the accuracy of theinformation herein contained. Bidders are encouraged tothoroughly inspect the items on which they intend to bidprior to sale. Absolutely no items will be removed until theday after the conclusion of the sale and payment is madein full. Subject to additions, deletions and prior sale. Forupdated information, please visit our website atwww.hilcoind.com for any date, sale process, terms andconditions and list of available assets.
Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURSAFTER THE AUCTION CLOSES. Payment is to be made toHilco Industrial, LLC. Payment Options: VISA, MastercardDiscover accepted – if invoice total is $2,000 or less; WireTransfer; Certified Check; or Company Check (with Bank let-ter of guarantee – see sample letter below). All sales are sub-ject to sales tax. Purchasers claiming exemptions from taxesmust provide proof satisfactory to the Auctioneer of their enti-tlement to claim such exemptions. Please see complete termsand conditions on our website, www.hilcoind.com.
Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at theAuction of Rome Die Cast on October 15-22, 2014.
Featuring Aluminum Cold Chamber
Die Casting Machines, Furnaces, CNC Robots,
Hydraulic Trim Presses, & Auxiliary Equipment
Complete Cold Chamber Aluminum
Die Casting Facility
Online Bidding Opens: Wednesday, October 15th
Online Bidding Closes: Wednesday, October 22nd
Rome, Georgia
