373 Munster Avenue, Toronto, ON, Canada M8Z 3C8www.corpassets.com • 416.962.9600 • [email protected]
AUCTION CONDUCTED BY:
CNC BORING, PROFILING & MACHINING EQUIPMENT
INSPECTION: BY APPOINTMENT ONLY. Please email [email protected] to arrange a date and time.
Thursday, September 1710:30 A.M. EDT
Assets Located in Brampton, Kitchener & Windsor
MARK YOUR
CALENDARS!
LIVE WEBCAST ONLY
Surplus Assets of
DEVTEK AEROSPACE INC.
ONLINE AUCTION
2
THIS BROCHURE IS ONLY A PARTIAL LISTING. PLEASE VISIT OUR WEBSITE WWW.CORPASSETS.COM FOR MORE DETAILED LISTINGS AND PHOTOS.
TO ARRANGE AN INSPECTION PLEASE CALL 416-962-9600
DMG MORI MU65 MONOBLOCK, 5-Axis CNC vertical machining center
KURAKI KBT-11WDX, 4.3” CNC table type horizontal boring mill
KURAKI KBT-11W, 4.3” CNC table type horizontal boring mill
INSTALLED NEW IN 2017
2015
3
THIS BROCHURE IS ONLY A PARTIAL LISTING. PLEASE VISIT OUR WEBSITE WWW.CORPASSETS.COM FOR MORE DETAILED LISTINGS AND PHOTOS.
ASSETS HAVE BEEN WELL MAINTAINED AND ARE UNDER POWER
O-M VT5-16N, CNC vertical boring mill OKK MCV-820, 4-Axis CNC vertical machining center
SNK FSP-120, CNC aerospace profilerSNK FSP-120, CNC aerospace profiler
DMG MORI (2015) (INSTALLED NEW IN 2017) DMU 65 MONOBLOCK, 5 axis CNC vertical machining center with 3D HEIDENHAIN TNC640 control, 25.6” diameter rotary table, travels: X–28.9”, Y–25.6”, Z–22”, A—120 deg./+120 deg., C–360 deg., speeds to 18,000 RPM, HSK63 taper, 60 station ATC, 46 HP, BLUM laser tool measuring, RENISHAW infrared measuring probe, 3D quick set, automation package included (two port thru the table hydraulic lines, robot ready w/ auto side door, PROFIBUS interface–$27K option), high pressure coolant thru spindle, rotating clear window view, chip conveyor, 2344 cutting hours (at time of listing), s/n: 12140013283
5 AXIS CNC VERTICAL MACHINING CENTEROM VT5-16N CNC vertical boring mill with FANUC 11-T CNC control, 72.74” swing, 63” 4-jaw chuck, 63.00” max turning height, travels X-67.62”, Z-35.50”, power elevating cross-rail with max 31.50” travel in (5) steps, 8.25” square ram size, speeds to 250 RPM, 60 HP main drive motor, 12 station ATC, coolant, chip conveyor, s/n MN-884212
CNC VERTICAL BORING MILL
©2020 CORPORATE ASSETS INC. ALL RIGHTS RESERVED.
AFFILIATIONS
INSPECTION BY APPOINTMENT ONLY. Please email [email protected] to arrange a date and time.
REMOVAL All assets must be removed no later than Thursday, October 1 by appointment only.
TERMSCorporate Assets Inc. assumes no liability for errors or omissions in this brochure. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
PAYMENT A Buyer’s Premium will apply at this sale. International & online bidders may need a refundable deposit to bid.SALE WILL BE CONDUCTED IN USD.
Please refer to our website at www.corpassets.com or call 416.962.9600 for further information. Pour les services en français, composez le 1.855.583.5551
We AcceptPlease visit our website as specific terms and conditions may apply.
Thursday, September 17Ontario, Canada
AUCTION DETAILS
SUBSCRIBE TO OURNEWSLETTERAND GET THE LATESTAUCTION UPDATES
corpassets.com/newsletter-signup
BID ONLINE AT:
THIS IS A PARTIAL LISTING ONLY! FOR FURTHER INFORMATION, PLEASE VISIT WWW.CORPASSETS.COM
Surplus Assets of
DEVTEK AEROSPACE INC.
LIVE WEBCAST ONLY
ONE MACHINE OR ENTIRE PLANTS, WE HAVE OVER 60 YEARS EXPERIENCE TO SELL YOUR EQUIPMENT AT FAIR MARKET VALUE.
CONTACT US TODAY TO LEARN MORE! 416.962.9600
WE BUY & SELL YOUR SURPLUS MACHINERY
BOEHRINGER VDF V800, CNC flat bed latheOKK MCV-550 CNC vertical machining center
SNK FSP-120V PROFILER (3) spindle vertical CNC aerospace profiler with retrofit FANUC 18i-M CNC control, 144”x48” table, travels X-120”, Y-50”, Z-24”, speeds to 3200 RPM, CAT 50 taper, 22,000 LBS max table capacity, coolant, chip conveyor, spindle chiller, s/n 450281SNK FSP-120V PROFILER (3) spindle vertical CNC aerospace profiler with FANUC 11-M CNC control, 144”x48” table, travels X-120”, Y-50”, Z-24”, speeds to 3200 RPM, CAT 50 taper, 22,000 LBS max table capacity, coolant, chip conveyor, spindle chiller, s/n 450832
CNC VERTICAL AEROSPACE PROFILERS
KURAKI KBT-11W CNC table type horizontal boring mill with FANUC 16M CNC control, 4.33” spindle diameter, 55” x 63” table, travels X-78.74”, Y-59”, Z-57”, W-19”, ISO 50 taper, speeds to 3500 RPM, 14,300 LBS max table capacity, coolant, s/n 4209KURAKI KBT-11WDX CNC table type horizontal boring mill with FANUC 16M CNC control, 4.33” spindle diameter, 55” x 63” table, travels X-78.74”, Y-59”, Z-57”, W-25”, ISO 50 taper, speeds to 2500 RPM, 14,300 LBS max table capacity, coolant, s/n 3225
CNC TABLE TYPE HORIZONTAL BORING MILLS
OKK MCV 820 CNC vertical machining center with FANUC 11M CNC control, 32” x 78” t-slot table, travels X-63”, Y-32”, Z-28”, speeds to 3,500 RPM, CAT 50 taper, 30 station ATC, TSUDAKOMA 19” 4th axis rotary table (may be sold separately), coolant, chip conveyor, spindle chiller, s/n 167OKK MCV 550 CNC vertical machining center with MELDAS CNC control, 22” x 51” t-slot table, travels X-43”, Y-22”, Z-22”, speeds to 4,000 RPM, CAT 50 taper, 30 station ATC, coolant, chip conveyor, spindle chiller, s/n n/a
CNC VERTICAL MACHINING CENTERS
