1

ONLINE AUCTION

WOODWORKING MACHINERY

ONLINE AUCTION EVENT VIA THE HIGH STREET AUCTION APP

21 JANUARY 2021 @ 08:00 – 17:00

CALL NIKOLAI – 082 764 3381 TO MAKE AN APPOINTMENT TO VIEW

VIEWING DATES: 18th – 20th January from 10AM until 2PM

Andre 082 687 3988 /

Tel: 011 684 2707 or

The rules of auction are available at http://www.highstreetauctions.com/auction-info-high-street-auctions.php#rules and at our offices. The

auction is conducted in terms of the Regulations relating to auctions contained in The Consumer Protection Act 68 of 2008 and notice is

given that all sales are subject to a minimum reserve unless otherwise stated.

THE HIGH STREET AUCTION COMPANY (PTY) LTD Registration No: 2010/019027/07

3

IMPORTANT AUCTION INFORMATION:

In order to register to bid, please ensure that you send through the following:

Registration deposit of R5 000 payable by EFT

Copy of ID Book

Proof of Residence

Letter of authority to sign on behalf of a juristic entity

All sales are subject to VAT & a 10% Buyer’s Commission + VAT.

No items will be released until balance of purchase price reflects in Auctioneers Trust account.

All assets to be removed within FOURTEEN Days from auction, or by alternative arrangement.

In the event that a cash deposit is made, the Depositor will be liable for the bank charges relating to that transaction. Invoices to be paid within 24 hours after auction closes or registration fee is forfeited.

SEVEN Days for removal of Assets.

Any lot can be withdrawn at any time.

Lots are subject to confirmation.

All items sold voetstoots.

DISCLAIMER: Whilst reasonable precautions have been taken in compiling the information contained in this

document, neither the seller nor the Auctioneer shall be liable for any loss, damage or expense whatsoever

or howsoever caused, arising from reliance on any information provided, nor do they guarantee the

completeness or accuracy thereof, the duty at all times resting on the Purchaser to conduct its own due

diligence inspections relating to the property/ies referred to herein in order to verify the information reflected,

and the purchaser’s participation in any auction or private treaty sale based upon such information shall be

entirely at its own risk and in acceptance of the aforegoing

4

LOT DESCRIPTION

001

One 'Martlet' Abrasive CUT-OFF SAW

0.3m dia. Blade approx. with Steel Table

002

One 'CMC' motorized STEEL BAR TWISTER

8-10mm Square Bar Capacity

With Pneumatic Clamp

003

One 'Radyne' 160 Amp Inverter MIG WELDER

Type TST 160-I

004

One 'Standard' Turret MILLING MACHINE

1.07m x 0,23m Table

With 2HP Drive, Power Traverse and

'Newall Sapphire' 2-Axis Digital Read-Out

005

One Steel Fabricated CLAMPING TABLE

1.2m x 2.5m Overall

With 5 Pneumatic Clamps

006

One Single Bag, Portable DUST FILTER

007

One 'Socomec' PANEL SAW

Type TMX 320

Serial No. SOC 530/10 of 2010

5.5HP

008

One Fabricated, Manually Operated STEEL BAR TWISTER

8-10mm Square Bar Capacity

009

One Timber Fabricated CLAMPING TABLE

0.6m x 1.5m Overall

With 4 Toggle Clamps

010

One 'Morso' Manually Operated MITRE CUTTER

150mm Cut

Serial No. B 12095

CATALOGUE

5

011

One 'Steelcraft' Flat Bed TRAILER

Twin Axle, 750kg Capacity

With Mesh Sides and Spare Wheel

2.2m x 3.3m approx.

Serial No. AE9B175JBDPBM1065

012

One 'SCM L'invincible' SPINDLE MOULDER

Type 120C

Serial No. JWD 63533

0.97m x 1.05m Table

With 'Martlet' 3 Roll Feeder

013

One Twin Bag DUST FILTER

014

One 'Metalclad' Vertical BANDSAW

0.725m Throat x 0.3m Capacity

With Tilting Table

015

One 'Festo' LOUVRE SLOT CUTTER

8mm dia Spindle approx.

2HP Drive approx.

016

One 'Rockwell' TABLE SAW

Type RT-40

Serial No. 560 of 2.80

0.32m dia. approx. Blade

017

One 'Unknown' WIDE BELT SANDER

1.35m Working Width

With 30HP approx. Drive

018

One 'Coral' 4-Bag DUST FILTER

019

One 'Griggio' THICKNESSER

Type PS 630

0.63m Working Width

020

One 'SCM L'invincible' COMBINATION SPINDLE MOULDER/SAW

Type ST3

1.36m x 1.05m Table

021

One 'Wadkin' SPINDLE MOULDER

Serial No. EQ 940

Test No. 55637

0.915m x 0.81m Table

6

022

One 'Holytek' SINGLE END TENONER

Model ST-120A

Serial No. 1547 of 99.07.01

with 2 & 3 HP Head Drives

023

One 'Unknown' Pneumatic UPSTROKE SAW

0.635 x 0.67m Table

With Roller Infeed Conveyor

024

One 'Robinson' Chain and Chisel MORTICER

Type BH

Serial No. SW 15007

0.2m Throat

025

One Steel Fabricated, Portable CLAMPING FRAME

1.3m x 2.4m approx. Double Sided

With 12 Clamps

026

Five Steel Fabricated TROLLEYS

027

One Steel Fabricated, OIL DIP TANK

With Mesh Cover

1.3m x 2.3m

028

The Miscellaneous Office Furniture, Fixtures and Fittings

029

One 'Titan' 3-Cylinder Reciprocating AIR COMPRESSOR

Vee-belt Drive 15kW A.C. Motor

2000 Litre/Min

Mounted on 500Litre Horizontal Air Receiver

030

One Elevated Dust Extraction CYCLONE

1.2m dia, x 3m High approx.

With Centrifugal EXTRACTION FAN

0.6m dia. x 0.47m wide approx. Casing

Vee-belt Drive 55-75kW A.C. Motor

NO DUCTING

031

One Steel Fabricated WASTE BALING PRESS

Twin Compartment

Hydraulically Operated with 4kW approx. Power Pack

0.7m x 0.7m x 1.2m Deep Press Compartment

032

One 'Sedgwick' MORTICER

0.14m Throat

033

One 'Unknown' MORTICER

0.14m Throat

7

034

One 'Danckaert' SINGLE END TENONER

Serial No. E718-S37494

With 3 x 1.5kW Head Drives

035

One Steel Fabricated CLAMPING TABLE

3m x 3.5m Overall

With 7 Pneumatic Clamps

036

One 'Samco' STROKE SANDER

Serial No. AR-12

0.15m x 3m Working Width

037

One 'YFC' Pneumatic UPSTROKE SAW

Model YFC-18

Serial No. 991015 of 1999

7.5HP

0.65 x 0.69m Table

With Roller Infeed and Outfeed Conveyors

038

One 'Robinson' Pull-Over RADIAL ARM SAW

Serial No. SA1900?

0.5m Travel Over

0.46m dia. approx. Blade

With 4.5m Table

039

One 'Robinson' PLANER

Type WE/T

Machine No. 367

Size 16"

Test No. 63/237

0.4m wide x 1.9m Table

040

One 'Weinig' 5 Head MOULDER

Type Profimat 23

Machine No. 123-1107 of 1995

0.26m Working Width NO DUCTING

041

One Fabricated TOOL JIG/SETTER

042

The Miscellaneous Assorted TOOLS and CUTTERS

043

One 'OMGA' NOTCHING MACHINE

Model Ti 88

Serial No. 2012078 of 19-04-12

1.9m Table

044

One 'Formahero"? Vertical Belt EDGE SANDER

Model FH-700

0.15m Wide Belt x 1.5m Long

8

045

One 'Elumatic' CUT-OFF SAW

Type MGS 72/30

Serial No. 0723041450 of 11/2012

3kW

With Roller Infeed Conveyor

046

One 'Delta' Pillar DRILLING MACHINE

Serial No. 71-1779

0.22m Throat

Vee-Belt Drive

16mm Capacity

047

One 'Masterwood' LOUVRE CUTTER

Type EPM.90

Serial No. 96070101

1.85kW

048

One 'Unknown' Pull-Over CUT-OFF SAW

240mm dia. approx. Blade

049

One 'Weinig' TOOL SHARPENER

Type Rondamat 168

Serial No. 9010854 of 2006?

0.15m dia, approx., Grinding Wheel

0.2m x 0.8m Table

050

One 'Unknown' Pull-Over RADIAL ARM SAW

0.68m Travel Over

With 0.2m dia, Cutter Fitted

0.75m Wide x 4.5m Long Table

051

One 'Unknown' 5-Daylight HEATED PRESS

1.3m x 2.9m x 0.08m Daylight Platens

Oil Heated

052

One 'ABAC' Garage Type AIR COMPRESSOR

2HP

053

One 'Eurasia' OIL COOLED WELDER

220 Amp

054

One Manual PALLET TRUCK

055

Approx 45 Wood Frames (10 Hole Frame)

056

Approx 30 Wood Frames (8 Hole Frame)

9

057

Approx 270 Wood Frames Various Sizes(8 Hole Frame)

060

One 2012 'VW' GOLF

Model Golf 6, 1.4TSI Comfortline Automatic

Registration No. NU 22568

219907 Kms

(Note: Advised Catalytic Converter Removed. Slight Damage to Front Left Bumper and Wheel

Arch. Rust Signs Over Windscreen)

Please note this vehicle is kept on a different site: Please contact Nikolai – 082 764 3381

To arrange viewing