Online Configuration SoftwareUser Guide
2 | nVent.com
NVENT ERIFLEX ONLINE SOFTWAREnVent has designed an interactive configuration software that allows drawing an electrical panel layout including all components and relevant technical information.
The software has been developed according to the new IEC 61439-1 standard. It includes: updated pricing, product information and a project calculator.
Whether you’re interested in making a complete low-voltage busbar system, a distribution kit, or if you need to determine a flexible connection with nVent ERIFLEX Flexibar, you can trust the nVent ERIFLEX software to help simplify the process.
The software will also provide you with technical and commercial datasheets dedicated to your project.
To enhance your experience while reading this user guide, make sure you are logged in, otherwise click this link: eriflex-configurator.nVent.com/eriflex
Choose your language
Enter your login and password
If you do not have your login and password information, please click on register
2 ways of creating your product/system selection
2- HOW TO START A PROJECT FROM THE LANDING PAGE
1- REGISTRATION
nVent.com | 3
From the nVent ERIFLEX portfolio side
From the application side
When it is completed, click on search
Price list information
Price list available in different currencies
Will automatically give you the
information for the selected product
Click here to validate
your choice
Choose the quantity according to
the packing unit
Link to our product
webpage
2 WAYS OF SELECTION
RESULTS FROM THE SEARCH
SELECTING FROM THE PRODUCT PORTFOLIO SIDE
Use the drop-down menus to complete the information you have
4 | nVent.com
FROM THE PRODUCT SELECTION
CALCULATION NOTE
Search all nVent ERIFLEX products
The price information is indicated according to the LME price. Possible actions: - Change the part number by using Modify - Edit the product selection - Print the product selection - Check the product webpage
Print the calculation note
To obtain the calculation note, go to Technical Data
nVent.com | 5
PROJECT CREATION
From nVent ERIFLEX portfolio side
From application side
SELECTING FROM THE APPLICATION SIDE
Type of project you have selected
Follow the 7 steps required to define
your project parameters.Should a step not be needed,
disregard it by clicking on "No".
Press the key valid to continue
Select an application to start the creation of your project.
6 | nVent.com
FROM THE PRODUCT SELECTION
download 3D models from
erico.com
Installation recommandations
View the number of selected products
Review the technical
information
Press the key « Valid » : To add the product
to your selection
The product highlighted is the product selected
nVent.com | 7
BILL OF MATERIAL IN EXCEL FORMAT TO PLACE YOUR ORDER
CALCULATION NOTE
You will be able to create a calculation note under "Technical Data".
You will be able to obtain the Bill of Material under Selected Products.
CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACEROur powerful portfolio of brands:
nVent.com/ERIFLEX
©2021 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.