Operating and installation instructions Built-in coffee ...– Only use cold, fresh tap water to...

Operating and installation instructionsBuilt-in coffee machine

To avoid the risk of accidents or damage to the appliance it is essentialto read these instructions before it is installed and used for the first time.

en – GB M.-Nr. 10 214 320

Packaging material / Disposal of old machine

2

Disposal of the packingmaterialThe packaging is designed to protectthe machine from damage duringtransportation. The packaging materialsused are selected from materials whichare environmentally friendly for disposaland should be recycled.

Recycling the packaging reduces theuse of raw materials in themanufacturing process and alsoreduces the amount of waste in landfillsites.

Disposing of your old machineElectrical and electronic machines oftencontain valuable materials. They alsocontain materials which, if handled ordisposed of incorrectly, could bepotentially hazardous to human healthand to the environment. They are,however, essential for the correctfunctioning of your machine. Please donot therefore dispose of it with yourhousehold waste.

Please dispose of it at your localcommunity waste collection / recyclingcentre or contact your dealer foradvice.

Ensure that it presents no danger tochildren while being stored for disposal.

Contents

3

Packaging material / Disposal of old machine ................................................... 2

Warning and Safety instructions .......................................................................... 6

Guide to the machine .......................................................................................... 16Exterior view........................................................................................................... 16

Accessories .......................................................................................................... 18

Operation .............................................................................................................. 19Touch display ......................................................................................................... 19Operation ............................................................................................................... 20Symbols in the display........................................................................................... 23

Using for the first time......................................................................................... 24Before using for the first time................................................................................. 24Switching on for the first time................................................................................ 24Water hardness ...................................................................................................... 25

Filling the water container................................................................................... 26

Filling the coffee bean container ........................................................................ 27

Switching on and off ............................................................................................ 28

Spout adjustment................................................................................................. 29

Making drinks ....................................................................................................... 30Making a coffee ..................................................................................................... 30Making two portions .............................................................................................. 31Cancelling preparation ........................................................................................... 31Dispensing several cups of coffee one after the other - Coffee pot ...................... 31Making coffee with ground coffee ......................................................................... 32Drinks with milk...................................................................................................... 33Dispensing hot water ............................................................................................. 35Making drinks using a profile ................................................................................. 35After making drinks ................................................................................................ 36

Coffee the way you like it .................................................................................... 37Grinder setting ....................................................................................................... 37Altering the drinks parameters ............................................................................... 38Amount of coffee ................................................................................................... 38Brewing temperature.............................................................................................. 38Pre-brewing the coffee........................................................................................... 39

Portion size ........................................................................................................... 40

Contents

4

Resetting drinks ................................................................................................... 41

Profiles .................................................................................................................. 42Opening a profile.................................................................................................... 42Creating a profile.................................................................................................... 42Selecting a profile .................................................................................................. 42Changing the name................................................................................................ 42Deleting a profile .................................................................................................... 42Changing a profile.................................................................................................. 43

Profiles: creating and processing your own drinks .......................................... 44Creating a drink...................................................................................................... 44Changing a drink: changing the portion size(s), drinks parameters and names.........

44Deleting a drink ...................................................................................................... 44

My Miele................................................................................................................ 45

Settings ................................................................................................................. 46Opening the Settings menu ................................................................................... 46Changing and saving settings................................................................................ 46Possible setting options......................................................................................... 47Language ............................................................................................................... 49Time ....................................................................................................................... 49Date........................................................................................................................ 49Timer ...................................................................................................................... 50Eco mode............................................................................................................... 52Lighting .................................................................................................................. 52Start screen............................................................................................................ 53Info (display information)........................................................................................ 53Locking the coffee machine (System lock )........................................................ 53Water hardness ...................................................................................................... 54Display brightness ................................................................................................. 54Volume ................................................................................................................... 54Plate warmer .......................................................................................................... 54Spout adjustment................................................................................................... 54Factory default ....................................................................................................... 55Miele@home, Remote control and SuperVision..................................................... 55Demo mode (Showroom programme) ................................................................... 55

Cleaning and care ................................................................................................ 56Quick guide............................................................................................................ 56Cleaning by hand or in the dishwasher.................................................................. 57Drip tray ................................................................................................................. 59

Contents

5

Drip tray cover........................................................................................................ 60Water container...................................................................................................... 60Waste container ..................................................................................................... 61Central spout ......................................................................................................... 61Sensor cover.......................................................................................................... 64Maintenance of the milk valve ............................................................................... 64Milk flask and lid .................................................................................................... 65Coffee bean container ........................................................................................... 66Interior and machine front...................................................................................... 67Central spout connector ........................................................................................ 67Brew unit ................................................................................................................ 68

Removing and cleaning the brew unit by hand ................................................ 68Maintenance programmes ..................................................................................... 69

Opening the "Maintenance" menu.................................................................... 69Rinsing the machine .............................................................................................. 70Rinsing the milk pipework...................................................................................... 70Cleaning the milk pipework.................................................................................... 71Degreasing the brew unit ....................................................................................... 72

Descaling the machine ........................................................................................ 74

Problem solving guide ......................................................................................... 77Messages in the display ........................................................................................ 77Unusual performance of the coffee machine......................................................... 80Unsatisfactory results ............................................................................................ 85Problems when heating up or frothing milk ........................................................... 87Replacing the angled connector ............................................................................ 88

After Sales / Guarantee ....................................................................................... 90

Saving energy ....................................................................................................... 91

Electrical connection ........................................................................................... 92

Installation ............................................................................................................ 93Building-in and combination options..................................................................... 93Ventilation .............................................................................................................. 94Building in the coffee machine............................................................................... 95Adjusting the hinges .............................................................................................. 96

Miele@home ......................................................................................................... 97

Copyright and licences........................................................................................ 99

Warning and Safety instructions

6

This coffee machine complies with current safety requirements.Improper use can, however, present a risk of both personal injuryand material damage.

To avoid the risk of accidents and damage to the machine, pleaseread these instructions carefully before using it for the first time.They contain important notes on installation, safety, use andmaintenance.Miele cannot be held liable for damage caused by non-compliance with these instructions.

Keep these instructions in a safe place and pass them on to anyfuture owner.


7

Correct application

This coffee machine is intended for use in domestic householdsand similar working and residential environments.Examples of a working or residential environment include

– shops, offices and other working environments,

– small businesses, showrooms etc.,

– where the coffee machine is being used by customers in hotels,motels, bed and breakfast and other similar establishments.

This coffee machine is not intended for outdoor use.

It must only be used as a domestic appliance to make espresso,cappuccino, latte macchiato etc. Any other use is not permitted.

This coffee machine can only be used by people with reducedphysical, sensory or mental capabilities, or lack of experience andknowledge, if they are supervised whilst using it, or have beenshown how to use it in a safe way and recognise and understand theconsequences of incorrect operation.


8

Safety with children

Caution! Danger of burning and scalding on the dispensingspouts.

Children's skin is far more sensitive to high temperatures than thatof adults.

Ensure children do not touch hot surfaces of the coffee machineor place parts of their body under the dispensing spouts.

Install the coffee machine where it is out of the reach of children.

Children under 8 years of age must be kept away from themachine unless they are constantly supervised.

Children 8 years and older may only use the coffee machineunsupervised if they have been shown how to use it safely andrecognise and understand the consequences of incorrect operation.

Please supervise children in the vicinity of the coffee machine anddo not allow them to play with it.

Children must not be allowed to clean the coffee machineunsupervised.

Remember that coffee and espresso are not suitable drinks forchildren.

Danger of suffocation. Packaging, e.g. plastic wrappings, must be kept out of the reach ofbabies and children. Whilst playing, they could become entangled inpackaging or pull it over their head and suffocate.


9

Technical safety

Installation and repairs may only be carried out by a Mieleauthorised service technician. Installation, repairs and other work byunqualified persons can cause considerable danger to users.

A damaged coffee machine could be dangerous. Before buildingin the machine, check it for any externally visible damage. Do notuse a damaged machine.

To avoid the risk of damage to the machine, make sure theconnection data (voltage and frequency) on the data platecorresponds to the household supply, before connecting themachine to the mains supply. Consult a qualified electrician if in anydoubt.

The electrical safety of this coffee machine can only beguaranteed when correctly earthed. It is essential that this standardsafety requirement is met. If in any doubt please have the electricalinstallation tested by a qualified electrician.

Reliable and safe operation of the coffee machine can only beguaranteed if it is connected to the mains electrical supply.

Do not connect the machine to the mains electricity supply by amulti-socket adapter or an extension lead. These are a fire hazardand do not guarantee the required safety of the appliance.

The coffee machine must not be used in a non-stationary location(e.g. on a ship).

For safety reasons, this machine may only be used when it hasbeen built in.

If the coffee machine is to be built in above another appliance,there must be a full-width, closed shelf between them (except whenit is combined with a suitable built-in plate/food warming drawer).


10

The second electrical connection socket on the back of themachine may only be used for connecting a MieleEGW 4000-14, -29, EGW 5000-14 plate warming drawer or anESW 6x14, ESW 6x29 food warming drawer.

Only use the coffee machine in rooms where the ambienttemperature is between +10 °C and +38 °C.

Do not cover or block the ventilation gaps.This would prevent adequate ventilation. Condensation can damagethe coffee machine or the furniture housing unit.

Ensure that there is sufficient ventilation around the coffeemachine. The ventilation gaps in the furniture housing unit and thegap between the top of the housing unit and the ceiling must be atleast 200 cm2. Otherwise condensation can build up and damagethe machine or the housing unit.

If the coffee machine is built-in behind a kitchen furniture door, itmay only be used with the furniture door open. This will prevent theformation of heat and humidity and subsequent damage to themachine and/or furniture unit. Do not close the furniture door whilethe coffee machine is in use. Ensure the coffee machine has cooleddown completely before closing the furniture door.

Repairs may only be carried out by a Miele authorised servicetechnician. Repairs by unqualified persons can cause considerabledanger to the user.

The coffee machine must be disconnected from the electricitysupply during repair work.

While the machine is under guarantee, repairs should only beundertaken by a Miele authorised service technician. Otherwise theguarantee is invalidated.

Faulty components must only be replaced by genuine MieleOriginal spare parts. The manufacturer can only guarantee the safetyof the machine when Miele replacement parts are used.


11

Never open the outer casing of the machine. Tampering withelectrical connections or components and mechanical parts is highlydangerous to the user and can cause operational faults or electricshock.

Only use genuine original Miele accessories with this machine.Using spare parts or accessories from other manufacturers willinvalidate the guarantee, and Miele cannot accept liability.


12

Correct use

The spouts present a danger of burning or scalding.The liquids and steam dispensed are very hot.

Please note:

– Keep well away from the area underneath the spouts when hotliquids and steam are being dispensed.

– Do not touch hot components.

– Hot liquid or steam could spatter from the spouts. Ensure that thecentral spout is clean and fitted correctly.

– Water in the drip tray can also be very hot. Take care whenemptying it.

Never look directly at the lighting or use optical instruments tolook at it.

Please note the following regarding water:

– Only use cold, fresh tap water to fill the water container. Hot orwarm water or other liquids could damage the coffee machine.

– Change the water every day to prevent a build-up of bacteria.

– Do not use mineral water. Mineral water will cause seriouslimescale deposits to build up in your machine and damage it.

– Do not use water from a reverse osmosis unit in this machine.This would damage it.

Only fill the bean container with roasted espresso/coffee beans.Do not fill the bean container with coffee beans which have beentreated with additives or with ground coffee.Do not fill the bean container with any type of liquid.


13

Do not use green (unroasted) coffee beans or mixtures of coffeebeans which contain green coffee beans. Green coffee beans arevery hard and still contain a certain amount of residual moisture.These can damage the coffee machine grinder as soon as grindingbegins.

Do not use coffee beans which have been treated with caramel,sugar or other substances including sugary liquids. Sugar willdamage the coffee machine.

Only add ground coffee or the Miele cleaning tablets fordegreasing the brew unit to the ground coffee chute.

Do not use any caramelised ready ground coffee. The sugar in thecoffee will stick to and block the brew unit of the coffee machine.The cleaning tablets for degreasing the brew unit will not remove thistype of deposit.

Only use milk without additives. Additives in milk usually containsugar and this will stick to the milk pipework.

If using dairy milk make sure that it has been pasteurised.

Do not place any alcohol mixtures which are alight underneath thecentral spout. The flames could ignite plastic components andcause them to melt.

Do not swing from or hang anything on the machine front when itis open as this could damage the hinges on the coffee machine.

The central spout connector cap is lubricated with siliconegrease. Take care not to get this on your clothes when removing orreplacing the containers or other components.

The machine must not be used for cleaning objects.


14

Cleaning and care

The coffee machine must be disconnected from the electricitysupply before cleaning or maintenance.

Clean the coffee machine and the milk flask thoroughly beforeusing for the first time (see "Cleaning and care").

All parts of the milk system need to be cleaned thoroughly andregularly. Milk contains bacteria which proliferate rapidly withinadequate cleaning.

Do not use a steam cleaner to clean this machine. Steam couldreach electrical components and cause a short circuit.

Descale the coffee machine regularly depending on the waterhardness level in your area. Descale the machine more frequently inareas with very hard water. Miele cannot be held liable for damagearising from insufficient descaling, the use of incorrect descalingagent or the use of descaling agent which is not of the appropriateconcentration.

Degrease the brew unit regularly with Miele cleaning tablets.Depending on the natural oil content of the coffee used, the brewunit can become blocked quite quickly.

Used coffee grounds should be disposed of with the organicrubbish or on the compost heap. Do not empty them down the sink,as they could block it.


15

For machines with stainless steel surfaces:

Do not use sticky notes, transparent adhesive tape, masking tapeor other types of adhesive on stainless steel surfaces. Thesedamage the surface, causing it to lose its dirt repellent protectivecoating.

The finish on stainless steel surfaces is susceptible to scratching.Even magnets can cause scratching.

Guide to the machine

16

Exterior view

a On/Off sensor

b Touch display

c "Back" sensor

d Handle

e Hot water spout

f Drip tray cover

g Central spout with lighting and automatic height adjustment

h Milk flask and lid

Guide to the machine

17

Interior view

i Ground coffee chute cover

j Brew unit

k Ground coffee chute

l Slide control to select fineness of ground coffee

m Coffee bean container

nWater container

o Drip tray with grid

pWaste container

q Drip catcher

r Central spout connector

s Maintenance panel

Accessories

18

These products and other usefulaccessories can be ordered via theinternet, from Miele (see back cover forcontact details) or from your Mieledealer.

Accessories supplied– Measuring spoon

for ground coffee

– Milk flask with lidfor storing milk and heating/frothingmilk

– Small lidFor storing the milk flask in the fridge

– Cleaning agent for milk pipeworkfor cleaning the milk system (Starterset)

– 2 containers (large and small)for cleaning and maintenance of themachine

– Descaling tabletsfor descaling the water pipework(Starter set)

– Cleaning tabletsfor degreasing the brew unit (Starter set)

– Test stripsfor determining the water hardnesslevel

– Silicone greasefor lubricating the cap on the centralspout connector

– Cleaning brushfor cleaning the milk pipework

– Central spout connector capReplacement part

– Angled connector for milkpipeworkReplacement part

Optional accessoriesMiele accessories and cleaning andconditioning products are available foryour coffee machine.

– Microfibre clothfor removing finger marks and lightsoiling

– Milk flask with lidfor storing milk and heating/frothingmilk

– Cleaning agent for milk pipeworkfor cleaning the milk system

– Descaling tabletsfor descaling the water pipework

– Cleaning tabletsfor degreasing the brew unit

– Silicone greasefor lubricating the cap on the centralspout connector

Operation

19

Touch display

The display can be scratched by pointed or sharp objects, e.g. pens.Only touch the touch display with your finger tips.

Touching the display with your finger creates a tiny charge which releases anelectrical impulse. This impulse is recognised by the touch display. The touchdisplay does not react if you touch it with an object.

It is possible for the Touch display to not react to finger contact if your fingers arecold.

The display is split into three sections.

Espresso

Coffee

Long coffee

Cappuccino

Latte macchiato

Process Profiles

DrinksMain menu

The top row shows you where you are, with the menu you are in highlighted inwhite. Open the menu you want by touching the menu name. The time (of day) isshown on the top right hand side.

The middle row shows the current menu and options. You can scroll to the right orleft by swiping your finger across the display to the right or left.

The and arrow sensors at the bottom of the screen are used for scrolling tothe left or right.The number of small squares between the arrows indicates the number of pagesavailable and your position within the current menu.

Operation

20

OperationEach time you touch a possible option the relevant field lights up orange.

Selecting or opening a menu

Touch the field you want with your finger.

Scrolling

You can scroll to the right or the left. Some options allow you to scroll up anddown too.

Swipe the screen, i.e. place your finger on the Touch display and swipe it in thedirection you want.Or:

Use the and arrows to scroll to the left or the right.

Exiting a menu ("Back" sensor)

Touch to return to the previous screen.

All entries made before this which have not been confirmed by touching OK willnot be saved.

Touching the sensor three times in succession will take you to the drinks menu.Touching the sensor in the Profiles menu will take you step by step back to thebeginning.

Entering numbers

You can enter numbers by swiping and touching the roller or via the numericalkeypad.

Wait until the roller goes grey again. The entered setting will not be saved until itgoes grey.

Touch .

Operation

21

The numerical keypad will appear.

Touch the numbers you want.

When you enter a valid number, the OK field will light up green.

Touch OK.

Entering letters

Profile names or the names for your own drinks are entered using a keyboard. It isbest to select short names.

Touch the letters or characters you want.

Touch Save.

Operation

22

Help

Helpful information is available when maintenance programmes are selected. Helpwill appear in the bottom row.

To display information in text and pictures,

Touch Help.

To return to the maintenance programme,

Touch Close.

Operation

23

Symbols in the displayThe following symbols can appear in addition to the text and the drinks symbols:

Symbol Explanation

Settings, e.g. the brightness of the display or the volume ofthe buzzer and keypad tones, are selected via a bar chart.

This indicates information and instructions about operatingthe coffee machine.Confirm the messages with OK.

The system lock is activated (see "Settings – Locking thecoffee machine (System lock )"): the coffee machinecannot be operated.

The timer is activated for Switch on at (see "Settings –Timer"). The symbol and the desired switching on timeappear in the display 23:59 hours before the coffee machineis due to switch on, as long as On or Night dimming isselected for the time display.

This symbol appears during the Clean the milk pipeworkmaintenance programme. (The symbol is also found on the water container: fill up tothis mark).

This appears while "Descale appliance" is taking place.(This symbol can also be found on the water container: fillup to this mark).

SuperVision display – only appears if the coffee machinehas been signed on to the Miele@home appliance networkand " SuperVision display – On" has been selected (seeseparate Operating instructions).

Using for the first time

24

Please read the operatinginstructions carefully and take thetime to familiarise yourself with thecoffee machine before using it forthe first time.

Before using for the first time Install the coffee machine and

connect it to the electricity supply(see "Electrical connection" and"Installation").

Remove any protective foil.

Clean the machine thoroughly beforefilling it with water and coffee beans(see "Cleaning and care").

Switching on for the first timeWhen you switch the coffee machineon for the first time, after the welcomescreen has appeared you will beprompted to set the following:

– Language and country

– Date

– Time

– Display (Time of day display)

Touch the On/Off sensor .

The welcome message Miele -Willkommen will appear in the displaybriefly.

Setting the language

Select the language and thentouch OK.

Select the country and thentouch OK.

The setting is now saved.

Setting the date

Enter the current date and touch OK.


Setting the time

Enter the current time of day andtouch OK.


Display

You can choose from the followingoptions:

– On: The time and date are alwaysvisible in the display when themachine is switched off.

– Off: The display is dark when themachine is switched off.

– Night dimming: The date and the timeare only displayed between the hoursof 5:00 and 23:00.

Touch the option you want andthen OK.

The coffee machine will use moreenergy depending on the option youchoose for the display. Informationabout this will appear in the display.

The coffee machine is now successfullyset up for use.

Fill the water container with fresh,cold tap water.

Using for the first time

25

Water hardnessThe water hardness level indicates howmuch calcium is dissolved in the water.The higher the calcium content, theharder the water, and the harder thewater, the more often the coffeemachine will need to be descaled.

The coffee machine measures theamount of water used and steam made.Depending on the level of waterhardness set, more or fewer drinks canbe dispensed before the machineneeds to be descaled.

Programme the coffee machine to thewater hardness level of your area sothat it functions correctly and does notget damaged. A prompt to descale themachine will then appear in the displayat the correct time.

The machine has four programmablelevels:

Water hardness Localwaterhardnesslevel

Setting (waterhardnesslevel)

0 - 8.4 °dH (0 -1.5 mmol/l)

Soft Soft 1

8.4 - 14 °dH(1.5 - 2.5 mmol/l)

Medium Medium 2

14 - 21 °dH(2.5 - 3.7 mmol/l)

Hard Hard 3

> 21 °dH(> 3.7 mmol/l)

Hard Very hard 4

Measuring the water hardness level

You can determine the water hardnessyourself using the enclosed test strip.Alternatively, your local water authoritywill be able to tell you the hardness ofwater in your area.

Dip the test strip in your drinkingwater for approximately one second,then shake off any excess water. Theresult will be evident after abouta minute.

Setting the water hardness level

Touch Settings.

Swipe the display until Water hardnessappears and touch this option.

Select the hardness level you wantand then OK.


Filling the water container

26

Change the water every day toprevent a build-up of bacteria.

Only use cold, fresh tap water to fillthe water container.Hot or warm water or other liquidscan damage the coffee machine.

Do not use mineral water. Mineralwater will cause serious limescaledeposits to build up in your machineand damage it.

Open the front of the coffee machine.

Pull the water container forwards toremove it.

Take off the lid and fill the watercontainer with fresh, cold tap waterup to the "max." mark.

Push the water container into themachine until it clicks into place.

If the water container protrudesslighlty or is a little high, checkwhether the surface that the watercontainer sits on is dirty. If the watercontainer is not positioned correctly,the outlet valve will not connectproperly and could leak. Clean thesurface, if necessary.

Filling the coffee bean container

27

Fill the coffee bean container withroasted coffee or espresso beans if youwant to use freshly ground coffeebeans for each cup of espresso orcoffee.

Alternatively, you can make coffee orespresso with ready ground coffee (see"Making coffee or espresso using readyground coffee").

Warning. Risk of damage to thegrinder.Only put roasted coffee or espressobeans in the container. Anythingelse, including ground coffee, willdamage the grinder.Do not fill the bean container withany type of liquid.

Warning. Sugar will damage thecoffee machine.Do not use coffee beans that havebeen treated with sugar, caramel orother substances and do not putliquids containing sugar in the coffeebean container.Do not use green (unroasted) coffeebeans or mixtures of coffee beanswhich contain green coffee beans.Green coffee beans are very hardand still contain residual moisture.These can damage the coffeemachine grinder as soon as grindingbegins.

Tip: You can use a nut or seed grinderto grind green coffee beans. Thesetypes of grinder generally have arotating stainless steel blade. You canthen add the ground green coffee oneportion at a time to the ground coffeechute and make the desired coffeedrink (see "Making espresso and coffeeusing ready ground coffee").

Pull out the coffee bean container.

Push back the lid and fill thecontainer with roasted coffee beans.

Slide the lid back into place.

Push the coffee bean container fullyback into the coffee machine. Closethe front.

Switching on and off

28

Switching off Touch the On/Off sensor .

If coffee has been dispensed, thecoffee machine will rinse the coffeepipework automatically beforeswitching off.

Switching off for longerperiods of timeIf the coffee machine is not going to beused for a longer period of time:

Empty the drip tray, the wastecontainer and the water container.

Clean all components thoroughly,including the brew unit, the centralspout connector and the drip catcherin the machine front.

Switch off the machine.

If you are leaving the front openwhile the coffee machine is not beingused for a long time, disconnect itfrom the mains electricity supply tosave energy.

Switching onWhen the coffee machine is switchedon, it heats up and rinses the pipework.This not only cleans the pipework, butalso warms it before coffee is prepared.

If the coffee machine is already atoperating temperature, the pipeworkwill not be rinsed when the machine isswitched on.

Touch the On/Off sensor .

The machine will begin rinsing after theheating-up phase. Hot water will comeout of the central spout.

You can now make drinks.

Tip: If you do not want the water fromthe rinsing process to flow into the driptray, place a suitable container (e.g. thesmall cleaning container) underneaththe central spout before making the firstcoffee of the day.

Spout adjustment

29

The central spout cannot be manuallyadjusted.

Before making the drink, the centralspout moves to the optimum height forthe cups or glasses used.

Switching the spoutadjustment on and offStart in the Drinks menu.

Touch Main menu or .

Touch Settings.

Swipe the display and select Spoutadjustment.

Select the required setting to switchspout adjustment on or off.

Touch OK.


Making drinks

30

The spouts present a danger ofburning or scalding.The liquids and steam dispensed arevery hot.Keep well away from the areaunderneath the spouts when hotliquids and steam are beingdispensed.Do not touch hot components.

The following drinks can be made:

– Espresso . This is a strong,aromatic coffee with a thick hazelnutbrown coloured layer of froth - knownas the crema - on top.When making espresso, useespresso roast coffee beans.

– Coffee . This differs from espressoby the increased amount of waterand the roast of the beans.Use coffee beans of the correct roastto make coffee.

– Long coffee is a coffee withconsiderably more water.

Making a coffee

Place a cup under the central spout.

Select the type of coffee you want.

Preparation will begin and the coffeewill be dispensed into the cup from thecentral spout.

To ensure that any coffee residuesfrom the factory testing process areremoved from the brewing system,please throw away the first two cupsof coffee when using the coffeemachine for the first time.

Making drinks

31

Making two portionsYou can dispense two portions ofespresso or coffee at once either intoone cup or two separate cups.

To fill two cups at the same time:

Place a cup under each of the coffeedispensers in the central spout.

Touch the two cup symbol for thedrink you want.

Two portions of the desired drink will bedispensed from the central spout.

Cancelling preparation Touch Stop or Cancel.

Dispensing several cups ofcoffee one after the other -Coffee potYou can make several cups of coffeeone after the other automatically withthe Coffee pot function (max. 1 litre).Up to eight cups can be made in thisway.

Make sure the Drinks menu is showingin the display.

Place a sufficiently large containerunder the central spout.

Select Coffee pot.

Touch the number of cups you want(3 to 8).

Follow the instructions in the display.

The coffee for each cup is individuallyground, brewed and dispensed. Eachstage of the process is shown in thedisplay.

You can interrupt preparation at anytime:

Touch Cancel or Stop.

You can use the Coffee pot functiontwice in a row. After this the coffeemachine will need a longer coolingdown time of an hour in order to avoidit being damaged.

Making drinks

32

Making coffee with groundcoffeeTo make coffee using ready groundcoffee, add a portion of ground coffeeto the ground coffee chute.This gives you the option of making acup of decaffeinated coffee, forexample, even though the coffee beancontainer is filled with roasted coffeebeans.

The coffee machine will recogniseautomatically that ready ground coffeehas been added to the ground coffeechute.

Only one portion of coffee or espressocan be made at a time when usingground coffee.

Adding ground coffee

Do not add more than one levelscoop of ground coffee to the coffeechute. If too much is added, thebrew unit will not be able to processthe coffee.

The coffee machine will use all theground coffee which has been added tothe chute to make the next coffee.

Use the measuring spoon supplied sothat the correct amount is used.


Remove the cover to the groundcoffee chute and open the lid.

Add one level spoon of ready groundcoffee to the chute.

Close the lid. Push the cover into themachine. Close the front.

Use ground coffee? will appear in thedisplay.

Making drinks

33

Making coffee with ground coffee

If you want to make a drink with groundcoffee:

Touch Yes.

You can now select which type of drinkyou would like to make with groundcoffee.

Place a cup under the central spout.

Select the drink.

This will now be dispensed.

If you do not want to use ground coffeeto make the drink:

Touch No.

The ground coffee will be directed intothe waste container.

If no drink is selected within approx.15 seconds, the ground coffee willalso be directed into the wastecontainer.

Drinks with milk

Danger of burning and scaldingon the central spout.The liquids and steam dispensed arevery hot.

Do not use milk with additives. Mostadditives contain sugar which willstick to the milk pipework anddamage the machine.If using dairy milk make sure that ithas been pasteurised.

The following drinks with milk can bemade:

– Cappuccino consisting of approx.2/3 milk froth and 1/3 espresso.

– Latte macchiato consisting of 1/3each of hot milk, milk froth andespresso.

– Caffè latte consisting of hotmilch and espresso.

Hot milk or milk froth can also bemade.

Making drinks

34

Notes on the milk flask

Milk is not cooled in the milk flask.Therefore, place the milk flask in therefrigerator if you are not going to usemilk for a while. Good milk froth canonly be achieved when cold milkbelow 10 °C is used.

a Lid

b Sensor

c Milk suction tube

d Glass flask Fill the milk flask with milk up to max.

2 cm below the rim. Close the milkflask with the lid.

It is important to keep the openingand neck of the milk flask clean(whilst filling it and carrying it). If theflask is dirty it could cause a fault inthe machine.

Push the milk flask fully back into thecoffee machine.

Making drinks with milk

Start in the Drinks menu.

Place a suitable container underneaththe central spout.

Select the drink you want.

The selected drink will now be made.

Making drinks

35

Dispensing hot water

Danger of burning and scalding onthe hot water spout. The waterdispensed is very hot.


Please note that the water dispensedis not hot enough for making tea.

Place a suitable container underneaththe hot water spout.

Select Hot water.

Hot water is dispensed into thecontainer under the spout.

To cancel preparation:

Touch Stop or Cancel.

Making drinks using a profileIf you have already created a userprofile (see "Profiles"), you can select itbefore dispensing a drink.

Touch Profiles and select the profileyou want.

The name of the profile and the createddrinks will appear in the display.

You can now make the drink you want.

Making drinks

36

After making drinksIf you have made a drink with milk, Startrinse cycle will appear in the display aftera while.

Touch OK.

The milk pipework will now be rinsed.

Even if you do not confirm themessage with "OK", the coffeemachine will rinse the pipework after awhile automatically.

Tip: Remove the milk flask and rinsethe lid under running water. Then fit thesmall lid to the milk flask and store theflask in the fridge until it is neededagain.You can only achieve good quality milkfroth with milk which is cold (< 10 °C).

Coffee the way you like it

37

To set the coffee machine up for thetype of coffee you are using, you can

– change the grinder setting,

– change the amount of coffee,

– set the brewing temperature, or

– pre-brew the ground coffee.

Grinder settingWhen the beans are ground correctly,the coffee or espresso will flow evenlyinto the cup with a good crema.The crema should have an even nut-brown colour.

The grinder setting you select will beused for all coffee drinks.

There are various ways to tell whetherthe coffee grinder is set correctly.

The coffee has been too coarselyground if:

– Espresso or coffee flows into the cuptoo quickly.

– The crema is very pale and uneven.

Set a finer grinder setting.

The coffee has been too finely groundif:

– Espresso or coffee only trickles intothe cup.

– The crema is dark brown.

Set a coarser grinder setting.

To avoid damaging the grinder,please note the following:Only adjust the grinder one setting ata time.Grind the coffee beans again if youwant to adjust the grinder to the nextsetting.


Push the slide control one setting tothe left (for finer grinding) or onesetting to the right (for coarsergrinding).

Close the front.

Make one cup of coffee.

Adjust the grinder setting again.

The altered grinder setting will not beused until after the second coffee hasbeen dispensed.


38

Altering the drinks parametersYou can set the amount of coffee, pre-brewing and the brewing temperaturefor each drink individually.


Touch Process or select Make drinks.

Touch Change drink.

Select a drink.

Touch Drink parameters.

For this drink you can now

– change the amount of coffee,

– set the brewing temperature, and

– switch on the "Pre-brewing" option.

Amount of coffeeThe coffee machine can grind and brew6-14 g of coffee beans per cup. Thegreater the quantity, the stronger thecoffee.

There are various ways to tell whetherthe amount of coffee is set correctly.

The amount of coffee is too low if:

– Espresso or coffee flows into the cuptoo quickly.

– The crema is very pale and uneven.

– The espresso or coffee lacks body.

Increase the amount of coffee so thatmore ground coffee is brewed.

The amount of coffee is too high if:

– Espresso or coffee only trickles intothe cup.

– The crema is dark brown.

– The espresso or coffee tastes bitter.

Decrease the amount of coffee so thatless ground coffee is brewed.

Touch Amount of coffee.

Select the amount of coffee you wantfrom the bar chart and thentouch OK.


Tip: If the coffee is too strong for you orit tastes bitter, try a different type ofbean.

Brewing temperatureThe ideal brewing temperature willdepend on

– the type of coffee being used,


39

– whether an espresso or a coffee isbeing made, and

– the altitude of the region.

If the coffee machine is located at morethan 2000 metres above sea level, thebrewing temperature needs to be setlower due to the change in pressure.This is because the boiling point forwater at a high altitude above sea levelis lower than the boiling point for waterat sea level.

Tip: Not all types of coffee canwithstand high temperatures. Certaintypes are too delicate - the crema ontop would not be as good and the tastewould be impaired.

The coffee machine has five brewingtemperatures.

Swipe the screen in the Brewtemperature field until the setting youwant appears.

Touch OK.


Pre-brewing the coffeeWhen the pre-brewing function isswitched on, the freshly ground coffeeis first moistened with a little hot water.Then the remaining water is forcedthrough the moistened coffee at highpressure. This helps release the flavourof the coffee.

You can set pre-brewing for a short orlong length of time, or deselect " Pre-brewing " altogether. The machine is supplied with the "Pre-brewing" function switched off.

Swipe the screen in the Pre-brewingdisplay until the setting you wantappears.

Touch OK.


Portion size

40

The flavour of the coffee produceddepends not just on the type of coffeeused, but also on the amount of waterused. You can programme the amount ofwater to suit the size of your cups andthe type of coffee you are using.

For coffee drinks that use milk, inaddition to the amount of coffee orespresso, you can also set the amountof milk or milk froth to be dispensed.You can also set the portion sizes forhot milk and milk froth separately.

Each type of drink has a maximumportion size that can be programmedinto the machine. The coffee machinehalts preparation of the coffee once thisportion size has been reached. Themaximum possible portion size for thistype of drink is then saved in themachine.

The changed portion size is alwayssaved in the current Profile. The nameof the current profile appears in thetop left-hand side of the display.

If the water container becomes emptywhilst making a drink, the machine willstop programming the portion size.The portion size will not be saved.


Place the desired cup under thecentral spout.

Touch Process and then Change drink.

Select the drink.

Touch Change portion size.

The desired drink will be made andSave will appear in the display.

When the cup is filled to the level youwant, touch Save.

If you want to change the portion sizefor coffee specialities made with milk(e.g. Cappuccino), the ingredients(components) which make up the drinkwill be saved one after the other whilethe drink is being made.

When the amount for each ingredientreaches the level you want, touchSave.

The programmed mix of ingredientsand portion sizes will now be dispensedevery time that particular drink isselected.

Resetting drinks

41

You can reset portion sizes andparameters for all drinks back to theirfactory default setting.


Touch Process and then Reset drinks.

Reset all drinks to default? will appear inthe display.

Touch Yes.

Profiles

42

In addition to the Miele profile, you canenter individual profiles to cater fordifferent tastes and preferences.

In each profile you can adjust thesettings for individual drinks (portionsize, amount of coffee, brewingtemperature and pre-brewing).

The name of the current profile isshown in the top left of the display.

Opening a profile Touch Profiles in Main menu or in

the Drinks menu.

You can now create a profile.

If you have already created a profile inaddition to the Miele profile, you havethe following options:

– Select profile from the profiles whichare already allocated.

– Change name if you want to alterthe name of a profile.

– Delete profile if you want to delete aprofile.

– Change profile to programme thecoffee machine so that it changesback to the Miele standard profileautomatically after each drink isdispensed or so that it retains themost recently selected profile.

Creating a profile Touch Create profile.

The editor will open in the display.

Enter the name you want and thentouch OK.

Selecting a profile Select the profile you want.


Changing the name Select Process and then Change name.

Select the profile you want and thentouch OK.

Enter the name you want and thentouch OK.

Deleting a profile Select Process and then Delete profile.

Select the profile you want and thentouch OK.

Profiles

43

Changing a profileYou can programme the coffee machineso that it changes back to the Mielestandard profile automatically aftereach drink is dispensed or so that itretains the most recently selectedprofile.

Select Process and then Changeprofile.

You now have the following options:

– Manually: The selected profile willremain active until you select anotherprofile.

– After each use: The machine willchange back to the Miele profileautomatically after a drink isdispensed.

– When switched on: Each time themachine is switched on it willautomatically select the Miele profileregardless of which profile wasselected before the machine was lastswitched off.

Select the option you want and thentouch OK.

Profiles: creating and processing your own drinks

44

You can create your own drinks foreach profile and set the portion sizeand drinks parameters, e.g. amount ofcoffee or brewing temperature for eachdrink individually.

You can also change the names of thedrinks and delete any unwanted drinksfrom the profile. A profile can contain amaximum of nine drinks.

First open the profile you want:

Select Main menu Profiles or touchProfiles in the Drinks menu.

Select the profile you want.


Creating a drinkYou can create new drinks based onexisting drinks. A profile can contain amaximum of nine drinks.

Touch Process.

Touch Create drink.

You can now select from the standarddrinks:

Select a drink.

Change the drink parameters andportion size(s) for this drink to whatyou want (see "Coffee the way youlike it" and "Setting the portion size").

Preparation will be begin and you cansave the portions of each componentas desired.

Enter a name for the new drink(maximum 8 characters) and touchSave.

The newly created drink will appear inthe profile.

Changing a drink: changingthe portion size(s), drinksparameters and names Touch Process.

Select Change drink.

Select a drink.

You can now either change the portionsize(s), drinks parameters or the namesas described.

Deleting a drink Touch Process.

Select Delete drink.

Select the drink and touch OK.

My Miele

45

You can display drinks you makefrequently, drinks from profiles andmaintenance programmes in theMy Miele screen.

The My Miele screen can be set toappear as the start screen (see"Settings - Start screen"). The My Mielescreen will then appear when the coffeemachine is switched on.

Opening the My Miele menu Touch Main menu MyMiele .

You can now configure My Miele.

If you have already added some entries,you can carry out the following underProcess:

– Sort entries

– Delete entries

To add entries Touch Add entry.

You can select options listed in thefollowing categories:

– Drinks

– Profiles

– Maintenance

Select the entry you want and thentouch OK.

A box will appear next to the selectedoption together with the menu it comesfrom.

To delete entries Touch Process.

Select Delete entry.

Select the entry you want and thentouch OK.

The entry will be deleted.

To sort entriesIf you have added more than fourentries you can sort these.

Touch Process.

Select Sort entry.

Now select the entry you want tomove and move it to the position youwant.

Confirm the new position with OK.

Settings

46

You can use the "Settings" menu tocustomise the coffee machine to suityour requirements.

Opening the Settings menuStart in the Drinks menu.


Select Settings.

You can now check or make alterationsto settings.The settings which are currentlyselected will have a coloured framearound them.

Touching takes you back to theprevious menu level.

Changing and saving settings Touch Main menu or .

Select Settings.

Select the option you want tochange.

Change the setting and touch OK.


Settings

47

Possible setting optionsThe factory default for each option has a * next to it.

Option Available settings

Select language deutsch, English and other languages

Country

Time Display

– Off* / On / Night dimming

Clock type

– Analogue / Digital*

Clock format

– 12 h (am/pm) / 24 h*

Set

Date Set

Timer Timer 1

– Set : Switch on at / Switch off after (0:30)* / Switch off at

– Days of the week: Monday / Tuesday / Wednesday /Thursday / Friday / Saturday / Sunday

– Activate : Switch on at (Yes / No*) / Switch off at (Yes /No*)

Timer 2

– Set : Switch on at / Switch off at

– Days of the week: Monday / Tuesday / Wednesday /Thursday / Friday / Saturday / Sunday

– Activate : Switch on at (Yes / No*) / Switch off at (Yes /No*)

Eco mode On* / Off

Lighting Brightness

Switch off after

Settings

48

Option Available settings

Start screen Main menu

Drinks

Profiles

MyMiele

Info Number of drinks

– Total coffee drinks / Espresso / Coffee / Long coffee /Cappuccino / Latte macchiato / Caffè latte / Milk froth /Hot milk / Hot water

No. of uses until

Descale the appliance / Degrease the brew unit

System lock On / Off*

Water hardness Soft 1

Medium 2

Hard 3*

Very hard 4

Volume Buzzer tones

Keypad tone

Spout adjustment On / Off*

Showroom programme Demo mode ( On / Off*)

Factory default Settings

MyMiele

Settings

49

LanguageYou can select the language (andcountry variant of that language) for alldisplay text.

Tip: If you select the wrong languageby mistake, you can find the"Language" option by following the flagsymbol .

TimeYou can set the clock type, the time (ofday) display, the clock format and thetime.

Display (Time of day display)


– On: The time and the date will showin the display all the time, even whenthe coffee machine is switched off.

– Off: The time and the date will notshow in the display when the coffeemachine is switched off.

– Night dimming: The time and the dateare displayed from 5:00 to 23:00.

The coffee machine will use moreenergy depending on the option youchoose for the display. Informationabout this will appear in the display.

Clock type

The time can be displayed as

Analogue or

Digital.

Clock format

The options are:

– 24-hour display ( 24 h)

– 12-hour display ( 12 h (am/pm))

Setting the time

You set the hours and minutes.

Synchronise

This option will only appear in thecoffee machine is signed on to theMiele@home appliance network (seeseparate Operating instructions).

DateYou set the day, month and year.

Settings

50

TimerThere are two timers with the followingfunctions:

The coffee machine

– switches on at a particular time, e.g.in the morning for breakfast ( Switchon at),

– switches off at a particular time (Switch off at),

– switches off after a particular lengthof time if none of the sensors hasbeen touched or a drink has not beenmade ( Switch off after; Timer 1 only).

You can allocate the timer functions toindividual days of the week.

For Switch on at and Switch off at, thetimer must be activated and at leastone day of the week allocated.

Selecting a timer

The options are:

– Timer 1: Switch on at, Switch off at,Switch off after

– Timer 2: Switch on at, Switch off at

Switch on at

The coffee machine will not switch onat the required time if you haveactivated the system lock.The timer settings are deactivated.

If the coffee machine has switcheditself on three times using the Switch onat timer function and no drinks havebeen dispensed, the machine will notswitch itself on again automatically.This prevents the coffee machine fromswitching itself on unnecessarily, forexample, whilst you are away onholiday.The programmed times will, however,remain in memory and will bereactivated after manually switching themachine on again.

Switch off at

In the event of a longer absence theprogrammed times will remain inmemory and will be reactivated aftermanually switching the machine onagain (see "Switch on at").

Settings

51

Switch off after

The Switch off after timer function isonly available in Timer 1.

If none of the sensors has beentouched or no drink has been made,the coffee machine will switch itself offafter 30 minutes to save energy.

You can change this to another time ofbetween 15 minutes and 9 hours.

Allocating days of the week

Select the day of the week you want.The selected day of the week will bemarked with a .

When all days of the week required aremarked,

Touch OK.

Activating and deactivating the timer

If you have selected On or Night dimmingfor the time display: when Switch on at is activated for thetimer, the symbol and the desiredswitching on time will appear in thedisplay 23:59 hours before.

If the system lock is activated, theSwitch on at option for the timer cannotbe selected.

Select the required timer function. Thetimer function selected will be markedby a .

Touch OK.

Settings

52

Eco modeEco mode is an energy-saving mode.The steam system does not heat upuntil a coffee drink or steam for hotmilk / milk froth is requested.

If Eco mode is switched off, milk frothand hot milk, as well as coffee andespresso, can be made one afteranother. The steam system remainsheated up and much more energy isused.

A message regarding the altered energyconsumption will appear in the display.

LightingYou have the following options:

– You can set the brightness when themachine is switched on.

– You can set the brightness when themachine is switched off.

– You can specify when the lightingshould switch off (Lighting: Switch offafter).

Set the brightness

First select:

– Machine switched on

– Machine switched off

Setting the time the lighting switchesoff (Switch off after)

You can adjust the length of time thatthe coffee machine remains lit up afterswitching off.

When the coffee machine is switchedon it remains lit up for 10 minutes afterthe last action. This time cannot beadjusted.

Settings

53

Start screenYou can choose which screen appearswhen the coffee machine is switchedon.

– Main menu

– Drinks

– Profiles

– MyMiele

Info (display information)In the Info option, the number ofportions made for each individual drinkcan be displayed.

You can also see whether more than50 portions can be dispensed beforethe machine needs to be descaled orbefore the brew unit needs to bedegreased (No. of uses until).

To return to the previous display,

touch OK.

Locking the coffee machine(System lock )You can lock the coffee machine toprevent it being used without yourknowledge, by children, for example.

Activating and deactivating thesystem lock

The timer settings for Switch on at aredeactivated if you have activated thesystem lock. The coffee machine willnot switch on at the pre-set time.

Overriding the system lock

While the message Press for seconds tounlock is in the display,

touch the lock symbol .

As soon as you switch the coffeemachine off, the system lock will beactivated again and the coffeemachine is locked.

Settings

54

Water hardnessPlease see "Using for the first time" forinformation about water hardness.

Display brightnessYou can set the display brightness inthe bar chart.

VolumeYou can set the volume of the buzzerand keypad tones using the bar chart.

Plate warmerA warming drawer can be connecteddirectly to a socket at the rear of thecoffee machine using a specialconnection cable. Miele or your Mieledealer will be able to advise you onwhich warming drawers are suitable.

The special connection cable requiredis available to order from Miele or yourMiele dealer.

Once the warming drawer is connected,you will need to activate it in Settings.


– Automatic: The warming drawer willswitch on and off together with thecoffee machine.

If you have programmed the Switchon at timer, the warming drawer willswitch on approx. 30 minutes beforethe coffee machine switches on inorder to pre-heat your cups.

– On: You can switch the warmingdrawer on or off manually wheneveryou want, independently of thecoffee machine.

– Off: The warming drawer cannot beswitched on (the pre-requisite for thisoption is that the warming drawermust be connected to the coffeemachine via the connection cable).

The coffee machine is delivered withthe Off option for the plate warmingdrawer setting selected.

Spout adjustmentPlease see "Spout adjustment(CupSensor)" for details of this feature.

Settings

55

Factory defaultYou can reset the settings back to theones which were set when the coffeemachine was delivered - the factorydefault settings.

When you do this the language andtime settings will not be deleted. Thenumber of drinks dispensed and thecoffee machine status (number of usesuntil descaling/ degreasing the brewunit) will also not be reset.

Please refer to the "Possible settingoptions" chart for the factory settings.

The following settings can be resetseparately:

– MyMiele

– Profiles and their drinks: see"Profiles" and "Profiles: creating andprocessing your own drinks"

– (Standard) Miele Profile portion sizesand parameters: see "Resettingdrinks"

Miele@home, Remote controland SuperVisionThese options will only appear if thecoffee machine has been signed on tothe Miele@home appliance network(see separate Operating instructions).

Demo mode (Showroomprogramme)

Do not activate this setting fordomestic use!

The coffee machine can bedemonstrated in the showroomusing Showroom programme. In thismode the machine lights up but drinkscannot be made or actions taken.

If you activate the demo mode, youcannot switch the appliance off withthe On/Off sensor .

Cleaning and care

56

Clean the coffee machine regularly to avoid a build-up of bacteria.

Quick guide

Recommended frequency What do I have to clean / maintain?

Every day(at the end of the day)

the milk flask and lid

the water container

the waste container

the drip tray and the drip tray cover

Once a week (or more often if badly soiled)

the central spout

the sensor cover

clean the milk valve with the cleaning brush

the interior

the small drip catcher inside the front of the machine

the brew unit

the front of the machine (especially straight after descaling)

Once a month lubricate the cap on the central spout connector

the coffee bean container

When prompted to the milk pipework (using the cleaning agent for milkpipework)

the brew unit (degrease with the cleaning tablets)

descale the machine

Cleaning and care

57

Cleaning by hand or in thedishwasherThe following must be cleaned by handonly:

– Central spout cover

– Brew unit

– Coffee bean container and the coffeebean container lid

– Maintenance panel

Some components of the coffeemachine are dishwasher safe.However, cleaning these in thedishwasher frequently can causethem to become discoloured due toregular contact with food residues(e.g. tomatoes) in the dishwasher.The surface can also becomedamaged.

The following components aredishwasher safe:

– Drip tray and grid

– Drip tray cover

– Water container

– Waste container

– Central spout (without stainless steelcover)

– Sensor cover

– Milk flask and lid

– Drip catcher

Danger of burning and scaldingon hot components or by hot liquids.Always allow the coffee machine tocool down before cleaning it.Caution: Water in the drip tray canbe very hot

Do not use a steam cleaner to cleanthis machine. Steam could reach theelectrical components and cause ashort circuit.

It is important to clean the machineregularly as the used coffee groundswill soon go mouldy. Sour milk depositscan block the milk pipework.

The central spout connector cap islubricated with silicone grease.Take care not to get this on yourclothes when removing or replacingthe containers or other components.

Cleaning and care

58

All surfaces are susceptible toscratching. Scratches on glasssurfaces could even cause abreakage. Contact with unsuitablecleaning agents can discolour thesurfaces. Wipe up any spillages orsplashes of descaling agentimmediately.

To avoid damaging the surfaces ofyour coffee machine, do not use:

– cleaning agents containing soda,ammonia, acids or chlorides,

– solvent-based cleaning agents,

– cleaning agents containing descalingagents,

– stainless steel cleaning agents,

– dishwasher cleaner,

– glass cleaning agents,

– oven cleaner,

– abrasive cleaning agents, e.g.powder cleaners and cream cleaners,

– hard, abrasive sponges, e.g. potscourers, brushes or sponges whichhave been previously used withabrasive cleaning agents,

– melamine eraser blocks,

– sharp metal tools.

Cleaning and care

59

Drip tray

Danger of burning.If the rinsing process has justfinished, wait a while beforeremoving the drip tray as the waterused for rinsing will run out of thecoffee spouts.

Clean the drip tray every day toprevent unpleasant odours andmildew.

A prompt will appear in the displaywhen the drip tray is full and needs tobe emptied. Remove the tray andempty it at the latest when this promptappears.

Open the machine front and carefullyremove the drip tray from themachine.

The grid in the drip tray prevents thewater from spilling out of the traywhen it is being carried.

Clean the drip tray and the grid withhot water and a little washing-upliquid, or in the dishwasher and drywith a cloth.

Clean the metal contact discs andthe space between them carefully.Dry everything thoroughly.

The discs will not be able to detectthat the drip tray is full if they aredamp or dirty.Check this area once a week, ifnecessary.

Clean the area underneath the driptray.

Push the drip tray back into thecoffee machine.

Make sure the drip tray has beenpushed right into the machine as faras it will go.

Cleaning and care

60

Drip tray cover Remove the drip tray cover.

The drip tray cover can be cleaned inthe dishwasher, or by hand using hotwater and a little washing-up liquid.

Dry the drip tray thoroughly.

Refit the cover on the drip traymaking sure it sits flush at the front.

Water containerChange the water every day to preventa build-up of bacteria.

Make sure that the valve, theunderside of the water container andthe surface the water container sitson are clean. Otherwise the watercontainer will not sit correctly.

The water container can be cleanedin the dishwasher, or by hand usinghot water and a little washing-upliquid. After cleaning, dry the watercontainer.

Carefully clean and dry the surfacethe water container sits on, takingspecial care to clean the recessesproperly.

Cleaning and care

61

Waste containerAfter a certain period of time a reminderto empty the waste container willappear in the display. The wastecontainer must be cleaned when thismessage appearsHowever, it is better to clean the wastecontainer every day to prevent coffeegrounds from turning mouldy.

There will probably also be some waterin the waste container left over from therinsing process.

Clean the waste container with hotwater and a little washing -up liquidor in the dishwasher, and dry with asoft cloth.

Also thoroughly clean the nowaccessible area in the machine wherethe waste container sits.

Central spoutWith the exception of the stainless steelcover, all parts of the central spoutshould be cleaned in the dishwasher atleast once a week. This will removecoffee deposits effectively.

Clean the stainless steel spout cover byhand only using hot water and a littlewashing-up liquid.

The central spout must be in themaintenance position for cleaning.Otherwise you will not be able toremove the parts.

If there is a cup or containerunderneath the central spout, makesure that you remove this as it wouldprevent the central spout frommoving into the maintenanceposition.


Select Maintenance and then Cleanthe central spout.


The central spout will move into themaintenance position .

Pull the cover forwards and off .

Cleaning and care

62

Press catch upwards slightly,grasp the dispensing unit by thehandle and pull this forwards and off.

Hold the unit at the sides and pull itforwards to release it.

Turn upper connecting piece andpull it upwards to remove it. Removelower connecting piece in thesame way.

Pull off dispensers .

The Y-piece connector must not beremoved.

Clean all parts thoroughly.

Cleaning and care

63

Tip: Place the dispensing unit verticallyin the upper basket of the dishwasher.Place the connecting pieces and thedispensers in the cutlery tray.

Clean the surfaces of the centralspout with a damp cloth.

Reassemble the dispensing unit inthe reverse order. Make sure thatupper connecting piece clicks intoposition. Press dispensers firmlyinto position.

Make sure that all parts are tightlyconnected to one another.

Replace the dispensing unit in thecentral spout and touch OK.

Then refit the cover and touch OK.

The central spout will now be rinsedthrough.

Cleaning and care

64

Sensor coverThe sensor cover for the cup protectioncut-out is located under the centralspout. If the automatic spoutadjustment sensors do not clearlyrecognise a container, this sensor willstop the central spout.

Clean the sensor cover one a week inthe dishwasher or by hand using hotwater and a little washing-up liquid.

To remove, press and hold the sensorcover between the dispensers .The press the central spout in fromboth sides .

This will release the sensor cover.

To replace it:

Insert both hooks at the back andpress the sensor cover upwards.

Maintenance of the milk valveThe milk valve should be cleaned oncea week to ensure good quality milk frothand prevent sputtering.



Select Maintenance and then Cleanthe central spout.

The central spout and the milk valve willmove into the maintenance position.

You must remove the cleaningbrush before confirming the OKmessage in the display. Otherwisethe coffee machine will be damaged.

Insert the brush in the milk valve andmove it back and forth.

Touch OK.

The milk valve will move into the correctposition and the milk pipework will berinsed through.

Cleaning and care

65

Milk flask and lid

Soiling can cause a fault in themachine.It is important to keep the neck andflange of the flask clean (whilst fillingit and carrying it).

Clean the milk flask holder on thecoffee machine with a damp cloth.

Clean the glass milk flask in thedishwasher or by hand using hotwater and a little washing-up liquid.Dry the milk flask thoroughly.

Before placing the lid of the milk flaskin the dishwasher:

Rinse the milk pipework in the lidunder running water.

If when doing this, no water runs out ofthe milk pipework ,

dismantle the milk flask lid and cleanit with the cleaning brush supplied.

Dismantling the milk flask lid andcleaning it with the cleaning brush

Milk fat deposits can collect in the milkflask lid. These will cause the milk tosputter when milk froth is being made.

Pull the milk suction tube out ofthe milk flask lid. Ensure that you alsoremove seal when doing this.

Clean both under hot, running water.Insert the cleaning brush suppliedinto the stainless steel tube andmove it back and forth until all milkdeposits have been removed.

Cleaning and care

66

Also use the cleaning brush to cleanthe milk pipework in the lid fromabove and below.

To reassemble the lid:

First insert the seal in the lid.

Make sure you do not fit the slantedend of the milk intake tube into theseal. This would damage it.

Fit the milk intake tube into the seal.

Coffee bean container Take the coffee bean container out of

the machine and then push the lidback to remove it.

Clean the coffee bean container andthe lid by hand using hot water and alittle washing-up liquid and then drythem both thoroughly.

Replace the lid and push thecontainer back into place in themachine.

Cleaning and care

67

Interior and machine front First take out all removable parts and

then clean the interior and themachine front with a mild solution ofhot water and washing-up liquid.

Tip: Use your vacuum cleaner toremove dry ground coffee residues.

A small drip catcher is located insidethe front of the machine at the bottom.

Remove the drip catcher and clean itin the dishwasher or by hand usinghot water and a little washing-upliquid.

After cleaning, remember to replacethe drip catcher in the coffeemachine.

Central spout connectorThe part which connects the brew unitand the central spout is located on theinside of the machine front.

Clean this connection regularly with adamp cloth, taking care not to wipethe grease off the cap.

Lubricate the cap at least once amonth with the silicone greasesupplied.

Cleaning and care

68

Brew unit

Removing and cleaning the brew unitby hand

Clean the brew unit by hand onlyusing warm water. Do not usewashing-up liquid. The moving partsof the brew unit are lubricated.Washing-up liquid will damage thebrew unit.

The brew unit can be removed forcleaning.It should be cleaned once a week.


Remove the water container, wastecontainer and the coffee chute cover.

Press the button under the handle ofthe brew unit and, whilst doing so,turn the handle clockwise .

Press the catch in front of the brewunit downwards, and pull the brewunit out carefully.

Carefully pull the brew unit out of thecoffee machine.

If you cannot remove the brew unit orcan only do so with difficulty, the brewunit is not in the correct position (See"Problem solving guide").

After taking the brew unit out of themachine do not change the positionof the brew unit handle, as thiswould cause the brew unit to be outof alignment and you will not be ableto push it back into the coffeemachine.

Clean the brew unit by hand underwarm running water without usingwashing-up liquid.

Wipe any remaining coffee off thetwo filters. One filter is located in thefunnel and the other to the left of thefunnel.

Dry the funnel to prevent groundcoffee sticking to it the next time acoffee is prepared.

Clean the inside of the coffeemachine. Use your vacuum cleaner toremove dry coffee grounds.

Cleaning and care

69

To replace the brew unit:

Proceed in the reverse order: pushthe brew unit back into the coffeemachine, making sure it goes instraight.

Press the button under the handle ofthe brew unit and, whilst doing so,turn the handle anti-clockwise .

Close the front.

Maintenance programmesThe coffee machine has the followingmaintenance programmes:

– Rinse the machine

– Rinse the milk pipework

– Clean the milk pipework

– Degrease the brew unit

– Descale the machine

Carry out the relevant maintenanceprogramme when the prompt to do soappears in the display. Please see thefollowing pages for more information.

Opening the "Maintenance" menu



Select Maintenance.

You can now select a maintenanceprogramme.

Cleaning and care

70

Rinsing the machineAfter a coffee has been dispensed, thepipework is rinsed before the coffeemachine switches off. This removes anyresidual coffee.



Select Maintenance and then Rinsethe appliance.

The pipework will now be rinsedthrough. The water used for rinsingprocess will run out of the centralspout.

Rinsing the milk pipeworkMilk residue can clog up the milkpipework. If you have made a drink withmilk, the coffee machine will rinse themilk pipework automatically after a fewminutes.



Select Maintenance and then Rinsethe milk pipework.

The milk pipework will now be rinsed.

Cleaning and care

71

Cleaning the milk pipework

All parts of the milk system need tobe cleaned thoroughly and regularly.Milk contains bacteria whichproliferate rapidly with inadequatecleaning. A dirty machine can beharmful to health.

The milk pipework must be cleaned atleast once a week. The coffee machine will prompt you atthe correct time. Clean the milk pipeworkin days will appear in the display threedays before the coffee machine is dueto be cleaned. Each time the coffeemachine is switched on the number ofdays until the milk pipework needs tobe cleaned will appear in the display.

Confirm the message with OK.

When the number of days remainingreaches 0, Clean the milk pipework willappear in the display. You cannot makedrinks with milk until cleaning has beencarried out.

You can now only dispense espresso,coffee, long coffee and hot water. Youwill only be able to make drinks withmilk once the milk pipework has beencleaned.


Carrying out the milk pipeworkcleaning process

The cleaning process cannot becancelled once it has started. Theprocess has to be completedthrough to the end.

The Clean the milk pipework maintenanceprogramme lasts forapprox. 13 minutes.



Select Maintenance and then Cleanthe milk pipework.

The process will start and variousmessages will appear in the display.


When Fill water container with lukewarmwater and cleaning agent up to the symbol and replace it appears in thedisplay, proceed as follows.

Make up the cleaning solution

We recommend using Miele milkpipework cleaning agent for cleaningthe milk pipework.This has been specially developed foruse with Miele coffee machines andprevents subsequent damage.

The milk pipework cleaning agent isavailable to order from Miele or via theinternet at www.miele-shop.com.

Add one sachet of the milk pipeworkcleaning agent to the water container.

Cleaning and care

72

Fill the water container to the mark with lukewarm water and stirthe solution.

Follow the instructions for the mixingratio carefully. It is important that youdo not fill the water container withtoo little water, otherwise cleaningwill be incomplete.

Replace the water container in thecoffee machine and close the front.


When prompted to by the display,

remove the water container and rinseit carefully with clean water. Makesure that no cleaning agent is left inthe water container. Fill the watercontainer with fresh tap water andreplace it in the machine.

The cleaning process is finished whenProcess finished appears in the display.

Degreasing the brew unitDepending on the natural oil content ofthe coffee used, the brew unit canbecome blocked quite quickly. It mustbe degreased regularly in order toensure aromatic coffee and trouble-freeoperation of the coffee machine.

We recommend using Miele cleaningtablets to clean the brew unit. Thesehave been specially developed for usewith Miele coffee machines and preventsubsequent damage.Miele cleaning tablets can be orderedfrom Miele or www.miele-shop.com.

The maintenance programme fordegreasing the brew unit lasts forapprox. 11 minutes.

After 200 portions have beendispensed, Degrease the brew unit willappear in the display.


This message will not go out until thebrew unit has been degreased.

Carrying out the degreasing the brewunit process

Switch the machine off with theOn/Off sensor .


The cleaning process cannot becancelled once it has started. Theprocess has to be carried through tothe end.

Select Maintenance and thenDegrease the brew unit.


Cleaning and care

73

When Place a cleaning tablet in the groundcoffee chute and close the chute appearsin the display:

Remove the coffee chute cover andopen the lid of the coffee chute.

Place a cleaning tablet into the coffeechute.

Close the lid, replace the coffeechute cover and close the machinefront.

Follow the further instructions givenin the display.

When Process finished appears in thedisplay

touch OK.

The brew unit has now been cleaned.

Descaling the machine

74

Warning. When descaling themachine, cover delicate surfacesand natural flooring to preventdamage from splashes of descalingsolution.Ensure that any splashes ofdescaling solution are wiped upimmediately.

Limescale builds up in the coffeemachine through use. How often themachine needs to be descaled willdepend on the water hardness level inyour area. It should be descaledregularly to ensure that it functionscorrectly.

The machine will guide you through thedescaling process. Various messageswill appear in the display, e.g. you willbe prompted to empty the drip tray orfill the water container.

Descaling must be carried out. Theprocess takes approx. 20 minutes.

The coffee machine prompts you whenit needs to be descaled. No. of uses untilappliance needs descaling: 50 appears inthe display. Each time a drink is made,the coffee machine displays thenumber of portions remaining untildescaling must be carried out.


When the number of remaining portionsreaches 0, the coffee machine will lockout.Then Descale will appear in the display.

You can switch off the coffee machine ifyou do not want to descale it at thistime. However, you will be not be ableto make any more drinks until descalinghas been carried out.


75

Descaling after promptappears in the displayDescale appears in the display.

The descaling process cannot becancelled once it has started. Theprocess has to be completed throughto the end.

Touch OK.

The process will start.


When Fill water container with lukewarmwater and descaling agent up to the symbol and replace it appears in thedisplay, proceed as follows.

Make up the descaling solution

We recommend using Miele descalingtablets for optimum results.These have been specially developedfor use with Miele coffee machines andprevent subsequent damage.

Other descaling agents, whichcontain other acids besides citricacid and/or other undesirablesubstances, such as chlorides forexample, could damage the coffeemachine. Moreover, the descalingeffect required could not beguaranteed if the descaling solutionwas not of the appropriateconcentration.

Miele descaling tablets are available toorder from Miele or via the internet atwww.miele-shop.com.

You will need 2 descaling tablets.

Fill the water container to the symbol with lukewarm water.

Drop 2 descaling tablets in the water.

Follow the instructions for the mixingratio carefully. It is important that youdo not fill the water container withtoo much or too little water.Otherwise the descaling process willbe cancelled prematurely.


76

Carrying out descaling

Replace the water container in thecoffee machine and close the front.

Follow the further instructions givenin the display.

When Fill the water container with fresh tapwater up to the descaling symbol appears in the display:

Carefully rinse the water containerwith clean water. Ensure that nodescaling solution residue remains inthe water container. Fill the watercontainer to the symbol with freshtap water.

The descaling process is finished at theend of the rinsing cycle and drinks canbe made again.

To protect the machine andsurrounding surfaces from damage,make sure you wipe up any spillagesor splashes of descaling agentimmediately.

Descaling when not promptedby a message Touch Main menu or .

Select Maintenance .

The descaling process cannot becancelled once it has started. Theprocess has to be completed throughto the end.

Select Descale.

The descaling process will now start.

Problem solving guide

77

Most problems that occur during daily use can be easily corrected. With the helpof the following guide, you will be able to find the causes of problems and rectifythem.

Warning. Do not open the casing of the machine.Repairs and other work by unqualified persons can cause considerable dangerto users.Repairs should only be carried out by a Miele authorised technician.

If you cannot resolve the problem following these instructions please contactMiele (see back cover for contact details).

Messages in the display

Fault messages must be confirmed with "OK", otherwise the message canreappear in the display even though the problem has been remedied.

Follow the instructions which appear in the display to remedy the problem.

If after this, the fault message appears in the display again, contact Miele.

Problem Cause and remedy

F1, F2, F3, F4,F80, F81, F82, F83

There is an internal fault. Switch the coffee machine off with the On/Off

sensor . Wait for approx. 1 hour beforeswitching it back on again.

F74, 77F225, F226F235, F236

There is an internal fault. Switch off the coffee machine with the On/Off

sensor . Wait for approx. 2 minutes beforeswitching the machine back on again.


78


F73 orCheck the brew unit

The brew unit cannot be positioned correctly, or it isdirty and the ground coffee cannot be processed. Check whether you can remove the brew unit (see

"Cleaning and care - Brew unit"). Remove and clean the brew unit (see "Cleaning

and care – Brew unit").

Push the coffee ejector of the brew unit into thecorrect position (see illustration).

Push the waste container and the water containerback in the machine. Do not insert the brew unit.Close the front and switch the machine on withthe On/Off sensor .

This will initialise the brew unit motor and put it backinto the start position. When Insert the brew unit appears in the display,

open the front and replace all the parts back in themachine. Close the front.

If the brew unit cannot be removed: Switch the machine off with the On/Off sensor .

Wait for approx. 2 minutes before switching itback on again.

F227, F228, F229, F230F233

There is a fault with the automatic spout adjustment. Confirm the message with OK.

The automatic spout adjustment will be deactivatedduring drink preparation whilst the machine remainsswitched on. You can still make drinks.


79


F234 Cup protection cut-out has been activated threetimes since switching on the coffee machine. Thecups or glasses being used are not recognised by theautomatic spout adjustment. Use cups or glasses which can be recognised by

the automatic spout adjustment.

There is a fault with the automatic spout adjustment. Switch the machine off with the On/Off sensor .


Too much ground coffee There is too much ready ground coffee in the groundcoffee chute.If more than one level spoon of ground coffee isadded to the coffee chute, the brew unit cannotprocess the coffee. The ground coffee will be directedinto the waste container and the fault message willappear in the display. Switch the coffee machine off with the On/Off

sensor . Remove and clean the brew unit (see "Cleaning

and care – Brew unit"). Remove the ground coffee inside the coffee

machine, e.g. with a vacuum cleaner. Use the coffee spoon supplied to add ground

coffee to the ground coffee chute. Add only oneportion of ground coffee to the chute.

Push the water container inuntil it engages

The water container is not in the correct position. Remove the water container and replace it.

This fault message also appears if the water containerwas not correctly filled and replaced for descaling. Fill the water container to the descaling symbol

and restart the descaling process.


80

Unusual performance of the coffee machine


The display remainsdark after the coffeemachine has beenswitched on using theOn/Off sensor .

The On/Off sensor was not touched for longenough. Touch the depression in the middle of the On/Off

sensor for at least 3 seconds.

The plug is not inserted in the socket correctly. Insert the plug into the socket correctly and switch

on.

The mains fuse has tripped due to a problem with thecoffee machine, the electricity supply or anotherappliance. Switch the coffee machine off at the wall socket

and unplug it. Contact a qualified electrician or Miele.

The lighting remains offafter the coffeemachine has beenswitched on.

The lighting has been switched off. Switch the lighting on (see "Settings - Lighting").

The lighting is faulty. Contact Miele.

The coffee machineswitches off suddenly.

The switch-off time programmed using the timer hasbeen reached. If required, you can select a new switch-off time

(see "Settings - Timer").

The plug is not inserted in the socket correctly. Insert the plug into the socket correctly and switch

on.

The coffee machine isswitched on. Thelighting switches offsuddenly.

The machine will switch itself off automatically afterapproximately 10 minutes if it is not being used.

The sensors do notreact to touch.The coffee machinecannot be operated.

There is an internal fault. Open the front of the coffee machine.

The current process currently will be stopped. Disconnect the coffee machine from the power

supply.


81


The coffee machinedoes not switch itselfon, although the Switchon at setting has beenactivated for the timer.

The system lock has been activated. You need to deactivate the system lock (see

"Settings - System lock").

A day of the week has not been selected. Check the timer settings and change these if

necessary (see "Settings - Timer").

The coffee machine was not used after beingswitched on automatically three times in succession(holiday mode). Switch the machine on and dispense a drink.

The display is hard tosee or not able to beread.

The display brightness has been set too low. Change this setting (see "Settings").

Fill and replace the watercontainer appears afterswitching on eventhough the container isfilled and fitted in themachine.The machinedoes not rinse.

The coffee machine needs descaling. Switch the machine off with the On/Off sensor .

Wait approx. 1 hour. Then switch the machine on again. As soon as

Heat-up phase appears in the display,touch Maintenance on the bottom right and thenselect Descale.

Descale the coffee machine. You may need torepeat the descaling process.


82


Empty the drip trayappears in the display,even though the driptray has been emptied.

The drip tray is not positioned correctly in themachine. Push the drip tray in as far as it will go.

The sensors on the drip tray are not working properly.The contacts are dirty.

Clean the contacts and dry everything thoroughly(see "Cleaning and care - Drip tray").

The machine front willnot close.

The containers are not pushed all the way in. Check the containers.

The hinges are not correctly aligned. Adjust the hinges (see "Installation - Adjusting the

hinges").


83


The machine front isdifficult to open andclose.

The cap on the central spout connector has either notbeen lubricated or is not lubricated sufficiently.

Check the silicone cap for damage. If necessary,replace it with the extra cap supplied.

Lubricate the cap with the silicone greasesupplied.

Lubricate the cap on the central spout connectorregularly once a month.

The coffee machinedoes not rinse itselfwhen turned on.

When rinsing, no wateror noticeably less waterthan usual runs out ofthe central spout.No coffee or noticeablyless coffee than usual isdispensed from thecentral spout. Thedisplay and the noisewhen coffee is beingmade remain the same. There is noticeablymore "coffee water" inthe waste container.

The central spout is not fitted correctly. Check whether the central spout has been

assembled as described (see "Cleaning and care –Central spout").

The cap is no longer securely fitted to the centralspout connector (see "Guide to the machine"). Check the cap on the central spout connector.

Lubricate the cap with the silicone greasesupplied.

The cap on the central spout connector is damagedor missing. Replace the cap with the extra cap supplied. Lubricate the cap with the silicone grease

supplied.

This is not a fault.If the coffee machine is already at operating temperature, the pipework will not be rinsed.


84


The descaling processwas started by mistake.

The descaling process cannot be stopped once the"OK" sensor has been touched.

Descaling must be continued through to completion.This is a safety precaution to make sure the machineis descaled correctly. This is important for thelongevity and functional efficiency of your coffeemachine. Descale the coffee machine (see "Descaling").

Loud noises are heardduring the descalingprogramme.

This is not a fault.These noises occur when water is flushed throughthe machine at a high pressure.

The display lights upbut the coffee machinedoes not heat up andno drinks are made.

The Demo mode for demonstrating the coffeemachine in the showroom has been activated. Deactivate the demo mode (see "Settings – Demo

mode")

The container beingused is not recognisedby the automatic spoutadjustment repeatedly.The central spoutmoves to the rim of thecup or glass andtriggers the cupprotection cut-out.

The container is unsuitable for the cup sensingsystem. Use other cups or glasses that can be recognised

by the automatic spout adjustment function.

There is a fault with the automatic spout adjustment. Switch the machine off with the On/Off sensor .


Use another cup or glass and make a drink. If the cup protection cut-out is triggered again or

the central spout moves to the rim of the cup orglass again, contact Miele.

The cup protection cut-out is not working. Thecentral spout moves tothe rim of the cleaningcontainer and becomeswedged against the rim.

If the cleaning container is very close to or touchingthe rear panel, the automatic spout adjustment willnot detect the rim properly. Move the cleaning container slightly further

forwards.


85

Unsatisfactory results


The coffee is not hotenough.

The cup has not been pre-heated.

The smaller the cup and the thicker its sides, themore important it is to pre-heat it. Pre-heat the cup, for example, with hot water.

The brewing temperature has been set too low. Set a higher brewing temperature (see "Coffee the

way you like it – Brewing temperature").

The filters in the brew unit are blocked. Remove and clean the brew unit by hand (see

"Cleaning and care – Brew unit"). Degrease the brew unit (see "Cleaning and care –

Brew unit").

The heating-up time isgetting longer, theamount of water beingdispensed is incorrectand the coffee machineis not performingproperly.

The coffee machine needs descaling. Descale the coffee machine (see "Descaling").

Coffee is not beingdispensed from bothspouts evenly. Milk maybe sputtering whenbeing heated up.

Coffee deposits in the central spout are obstructingdispensing. Dismantle the central spout and clean the

components – with the exception of the stainlesssteel cover – in the dishwasher (see "Cleaning andcare – Central spout").The central spout should be cleaned once aweek.

The coffee grindermakes a louder noisethan usual.

The coffee bean container has become empty duringthe grinding process. Fill the container with fresh beans.

There may be stones in amongst the coffee beans. Switch the coffee machine off immediately. Call

Miele.


86


The coffee flows tooquickly into the cup.

The coffee is too coarsely ground. Set the grinder to a finer setting (see "Setting the

coffee grinder").

The coffee trickles tooslowly into the cup.

The coffee is too finely ground. Set the grinder to a coarser setting (see "Setting

the coffee grinder").

The crema on thecoffee or espresso isnot as it should be.

The grinder setting is not correct. Set the grinder to a finer or coarser setting (see

"Setting the coffee grinder").

The brewing temperature is too high for this type ofcoffee. Set a lower brewing temperature (see "Brewing

temperature").

The coffee beans are stale. Add fresh coffee beans to the coffee bean

container.


87

Problems when heating up or frothing milk


The milk sputters whenit is dispensed. Hissingnoises can be heardwhen milk is beingheated up or frothed.Although the milkshould be frothed, onlyhot milk is dispensedfrom the central spout.

The milk temperature is too high. Good milk froth canonly be achieved when cold milk (< 10 °C) is used. Check the temperature in the milk flask.

The milk flask has not been fitted correctly and so airas well as milk is being sucked in. Push the milk flask in until it clicks into position.

The central spout is not fitted correctly. Check whether the central spout has been

assembled correctly.

The milk pipework in the milk flask lid is dirty. Dismantle the milk flask lid and clean it with the

cleaning brush (see "Cleaning and care – Milkflask").

Clean the central spout and the milk valve with thecleaning brush (see "Central spout" and"Maintenance of the milk valve").

The angled connector is blocked and must bereplaced. Replace the angled connector (see "Replacing the

angled connector").

Fill and insert milk flaskappears in the displayeven though the milkflask has been filled andinserted in the machine.

The milk flask lid could be dirty and this hasprevented the sensing function from workingproperly. Clean the milk flask lid and the milk flask

thoroughly. Dismantle the lid and clean it with thecleaning brush supplied (see "Cleaning and care –Milk flask and lid").


88

Replacing the angledconnectorIf instead of being frothed the milk isonly being heated up, check thefollowing first:

– Is the milk in the milk flask cold(< 10 ° C)?

– Have the central spout and the milkflask lid been cleaned carefully?

– Is the central spout correctly fitted?

If after checking the above, milk stillcannot be frothed, replace the angledconnector as follows:

You will need the replacement angledconnector supplied with the coffeemachine.

Do not use a needle or similarimplement. This would damage thecomponents.

Open the maintenance panel on theback of the machine front.

First release air intake tube fromopening . Then pull off angledconnector .

Pull both tubes out of the angledconnector.

Clean air intake tube underrunning water with the cleaning brushsupplied. "Blowing through" can helpto dislodge blockages.

Insert the brush in milk tube . Movethe brush back and forth as far aspossible until all milk deposits havebeen removed.

Take the new angled connector. (Youcan dispose of the old angledconnector with normal householdwaste).


89

Push the tubes onto the angledconnector and fit it in the coffeemachine. Make sure that the cross-piece on the angled connector isfacing downwards.

Re-insert the air intake tube intoopening .

Replace the maintenance panel andclose the front.

After Sales / Guarantee

90

After sales serviceIn the event of a fault which you cannotcorrect yourself, or if the machine isunder guarantee please contact:

– your Miele Dealer

or

– Miele.

Contact details for Miele are given atthe end of this booklet. N.B. A call-outfee will be charged for service visitswhere the problem could have beenresolved as described in theseinstructions.

When contacting your Dealer or Miele,please quote the model and serialnumber of your coffee machine.These are shown on the data plateinside the machine.

GuaranteeFor information on the applianceguarantee specific to your countryplease contact Miele. See back coverfor address.

In the UK, your coffee machine isguaranteed for 2 years from the date ofpurchase. However, you must activateyour cover by calling 0330 160 6640 orregistering online at www.miele.co.uk.

Saving energy

91

If the settings of the following functionsare altered from the factory default,energy consumption will increase:

– Eco mode

– Lighting

– Time of day display

– Timer

Electrical connection

92

All electrical work should be carried outby a suitably qualified and competentperson only, in strict accordance withcurrent national and local safetyregulations (BS 7671 in the UK). Installation, repairs and other work byunqualified persons could bedangerous. The manufacturer cannotbe held liable for unauthorised work.

The voltage and frequency are given onthe data plate located inside themachine. Please ensure these matchthe household mains supply. This datamust correspond in order to avoiddamage to the machine. The fuse ratingis quoted on the plug.

The coffee machine is supplied with amains cable with moulded plug forconnection to a 50 Hz, 220-240 Vmains supply.

The fuse rating must be at least 13 A.

Connection should be made via a fusedplug and suitable switched socketwhich is easily accessible afterinstallation. If the mains socket is notaccessible after the appliance has beenbuilt in, a separator for each terminalmust be present. There must be an all-pole contact gap of at least 3 mm in theswitch (including switch, fuses andrelays according to EN 60335).

Do not connect the machine to aninverter such as those used with anautonomous energy source e.g. solarpower. When switched on, peak loadsin the system can cause the safetyswitch off mechanism to be triggered.This can damage the electronic unit.

The coffee machine must not be usedwith so-called energy saving deviceseither. These reduce the amount ofenergy supplied to the machine causingit to overheat.

Installation

93

Building-in and combination optionsThe machine is designed to be built into a tall unit.

It can also be combined with other Miele built-in appliances. If the coffee machineis to be built in above another appliance, there must be a full-width, closed shelfbetween them (except when it is combined with a suitable Miele built-in plate orfood warming drawer).

Some Miele warming drawers can be connected directly to a socket at the rear ofthe coffee machine using a special connection cable (available as an optionalaccessory) so that the warming drawer can be switched on and off at the sametime as the coffee machine.

Only connect a Miele warming drawer to the coffee machine. You can find outwhich warming drawers are suitable for use with this coffee machine bycontacting Miele.

Installation

94

Ventilation

Condensate can damage the coffeemachine or the housing unit.The ventilation gaps given must beobserved.Do not cover or block the ventilationgaps.Dust the ventilation gaps regularly.

Steam which is created when water isheated up can condense on the interiorand the inside of the front of the coffeemachine.

When installing the coffee machineensure that there is sufficient ventilationat the rear of the machine to allowsteam and heated air to escape withouthindrance.

The housing unit should be configuredas follows:

– Air intake occurs via the plinth atthe bottom of the machine and theair escapes at the top at the rearof the housing unit.

– A ventilation gap of at least 40 mmdepth must be allowed for behind themachine for air to circulate.

– The ventilation cross-sections in theplinth, housing unit and below theroom ceiling must amount to at least200 cm2 to ensure that air cancirculate without hindrance.

Top ventilation gap

The ventilation gap at the top of themachine can be constructed in differentways:

a directly above the coffee machinewith a ventilation grille (free air flowof at least 200 cm2)

b in between the housing unit and theceiling

c through a suspended ceiling.

Installation

95

Building in the coffee machine

Before installation make sure thatthere is no power supply to themachine. This also applies should itever need to be taken out of itshousing unit.The machine may only be operatedwhen built-in and in an ambienttemperature range between +10 °Cto +38 °C.You will need two Allen keys (size 3and 5) for installing the machine.

To align the machine front with thefurniture front ensure that there is asealing strip provided all the wayaround the building-in niche or aroundthe coffee machine.

If the housing unit niche is not fittedwith a sealing strip you should fit aMiele sealing strip to the machinebefore installing it. This is fitted fromthe back of the machine.

The sealing strip is available to orderfrom Miele.

Tip: It is useful to have somewhere atthe height of the niche to place themachine on. This makes electricalconnection easier.

Using the large allen key, unscrew allfour feet out by 2 mm.

The feet can be unscrewed by up toapprox. 10 mm.

Connect the machine to the electricalsupply.

Take care not to damage theelectrical connection when pushingthe machine into the niche.

Push the coffee machine all the wayinto the niche until you feel aresistance.

Check the height of the coffeemachine to make sure that it is sittingcentrally in the niche and that it islevel. If this is not the case, realignthe machine using the four feet.

Installation

96

Four M5 socket screws are supplied foraligning and securing the machine in itsniche.

Open the front of the machine andloosely fit the screws at either side.

Carefully turn the lower socketscrews to centre the machine in theniche.

Tighten both upper socket screws byhand to secure the machine in theunit. Do not overtighten them.

Adjusting the hingesIf the machine front becomes difficult toopen or close after installation, you canadjust the hinges to realign it (TX 20):

Tighten screw to align the front ofthe machine so that it is flush withthe front of the housing unit.

Tighten screw to align the front ofthe machine horizontally andvertically.

Miele@home

97

a Miele@home communication enabled appliance

b Miele@home communication stick XKS3000Z or communication moduleXKM3000Z

c Miele@home communication enabled Master appliance with SuperVisionfunctionality

d Miele@home Gateway XGW3000

eWiFi router

f Connection to a Home automation system

g Smartphone, Tablet PC, Laptop

h Internet connection

Miele@home

98

Please note that the Miele@homeand SuperVision system is currentlyonly available in selected countries.

This appliance / is network enabledand can be connected to theMiele@home system via acommunication module orcommunication stick and aconversion kit where required.

The Miele@home system enablesnetwork enabled appliances to sendinformation via the household wiringnetwork to a master appliance suchas an oven with SuperVisionfunctionality, about their operationalstatus, as well as information about theprogress of the programme.

Displaying information andcontrolling appliances

– SuperVision master appliance The status of other signed onappliances can be shown in thedisplay of some network enabledappliances.

– Mobile device A PC, Notebook, Tablet PC or aSmartphone can be used within thereception area of a household WLAN to display status information aboutsigned on appliances and carry outcertain functions.

– Household network The Miele@home system enablessmart living. The Miele@homeGateway allows other networkenabled appliances to integrate intothe household bus system.

– In Germany, network enabledappliances can be integrated into theQIVICON Smart Home Platforminstead of the Miele@home Gateway(www.qivicon.de).

SmartStart (depending on householdappliance)

Smart grid enabled appliances can bestarted automatically at a time whenelectricity costs are favourable or whena favourable supply of electricity isavailable (e.g. from a solar powersystem).

Optional accessories (depending onhousehold appliance)

– Communication module XKM3000Zor communication stick XKS3000Z

– Conversion kit for communicationsystem XKV

– Miele@home Gateway XGW3000

These accessories are supplied withtheir own installation and operatinginstructions.

Further information

Further information regardingMiele@home is available on the internetand in the instruction manuals of thevarious Miele@home components.

http://www.qivicon.de

Copyright and licences

99

Miele uses software to operate and control the coffee machine.

The copyright authorisation from Miele and other relevant software suppliers (e.g.Adobe) must be respected.

Miele and their suppliers reserve the rights to the software components.

In particular the following are prohibited:

– copying and distribution,

– modifications and derivations,

– decompilation, reverse engineering, disassembling and other such reductions ofsoftware.

This product contains Adobe® Flash® Player software under licence from AdobeSystems Incorporated, Adobe Macromedia Software LLC. Adobe and Flash areregistered trademarks of Adobe Systems Incorporated.

Components which fall under GNU General Public Licence and further OpenSource licences are integrated into the software.

An overview of the integrated Open Source components and a copy of the currentlicence can be obtained at http://www.miele.com/device-software-licences. Youwill need to enter the specific product name.

Miele will provide the source code for all components of software licensed underthe GNU General Public Licence and comparable Open Source licences.

For source code requests, please email [email protected].

http://www.miele.com/device-software-licences

United KingdomMiele Co. Ltd.Fairacres, Marcham RoadAbingdon, Oxon, OX14 1TWCustomer Contact Centre Tel: 0330 160 6600E-mail: [email protected]: www.miele.co.uk

AustraliaMiele Australia Pty. Ltd.ACN 005 635 398ABN 96 005 635 3981 Gilbert Park Drive, Knoxfield, VIC 3180Tel: 1300 464 353Internet: www.miele.com.au

Miele (Shanghai) Trading Ltd.1-3 Floor, No. 82 Shi Men Yi RoadJing' an District200040 Shanghai, PRCTel: +86 21 6157 3500, Fax: +86 21 6157 3511E-mail: [email protected], Internet: www.miele.cn

China

41/F - 4101, Manhattan Place23 Wang Tai RoadKowloon Bay, Hong KongTel: (852) 2610 1331, Fax: (852)2610 1013Email: [email protected]

Miele (Hong Kong) Limited

Miele India Pvt. Ltd.Ground Floor, Copia Corporate SuitesPlot No. 9, JasolaNew Delhi - 110025Tel: 011-46 900 000, Fax: 011-46 900 001E-mail: [email protected], Internet: www.miele.in

India

Miele Ireland Ltd.2024 Bianconi AvenueCitywest Business Campus, Dublin 24Tel: (01) 461 07 10, Fax: (01) 461 07 97E-Mail: [email protected], Internet: www.miele.ie

Ireland

MalaysiaMiele Sdn BhdSuite 12-2, Level 12Menara Sapura Kencana PetroleumSolaris Dutamas No. 1, Jalan Dutamas 150480 Kuala Lumpur, MalaysiaPhone: +603-6209-0288Fax: +603-6205-3768

Miele New Zealand LimitedIRD 98 463 631Level 2, 10 College HillFreemans Bay, Auckland 1011, NZTel: 0800 464 353Internet: www.miele.co.nz

New Zealand

Miele Pte. Ltd.163 Penang Road# 04 - 03 Winsland House IISingapore 238463Tel: +65 6735 1191, Fax: +65 6735 1161E-Mail: [email protected]: www.miele.sg

Singapore

Miele (Pty) Ltd63 Peter Place, Bryanston 2194P.O. Box 69434, Bryanston 2021Tel: (011) 875 9000, Fax: (011) 875 9035E-mail: [email protected]: www.miele.co.za

South Africa

Miele Appliances Ltd.P.O. Box 11 47 82Gold & Diamond Park, Sheikh Zayed RoadBuilding 6 / Offices Nos. 6-214 to 6-220DubaiTel: +971-4-341 84 44Fax: +971-4-341 88 52E-Mail: [email protected]: www.miele.ae

United Arab Emirates

Carl-Miele-Straße 29, 33332 Gütersloh, GermanyManufacturer: Miele & Cie. KG

100

M.-Nr. 10 214 320 / 03en – GB

CVA 6800

Date post:	20-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Operating and installation instructions Built-in coffee ...– Only use cold, fresh tap water to...

Documents