+ All Categories
Home > Documents > Operating Material - Release list Mechanics

Operating Material - Release list Mechanics

Date post: 14-Apr-2022
Category:
Upload: others
View: 6 times
Download: 0 times
Share this document with a friend
76
Version date: 01.01.2022 Version: 2.4 Page 1 von 76 Operating Material - Release list Mechanics for Component-Productions of the Volkswagen Group Craft specific Part
Transcript
Page 1: Operating Material - Release list Mechanics

Version date: 01.01.2022

Version: 2.4 Page 1 von 76

Operating Material - Release list

Mechanics

for Component-Productions

of the Volkswagen Group

“Craft specific Part”

Page 2: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 2 from 76

Document Change Information

Version Date Mode of change Page/Chapter

1.9.1 01.07.2017 - Namur valves with form A plug added - Correction of the pressure gauges in the part lists of the standard ser-

vice units

3.3.1.3 3.6.10

2.0 01.01.2018 - Specification Mechanic reworked (Version 2.0) - Updated the contact person - Addition of the Code "GK" for standard piston/slide in the DGC-K lin-

ear drives - Updated images for one-way flow control valves - Addition of the fittings at the valve terminals - Oiler with fill level check added - F33 fieldbus as standard fieldbus in the example-code of Guideline

CPX/MPA updated

1 3.1.2 3.3.4.1 3.4 3.6.6 4.1

2.0.1 01.07.2018 - Update of service units MS6, due to new pressure build-up valve - New pressure valve MS6-DL-1/2 added - Control air switching valve and pressure switch added - Input module 8 DE is replaced by input module 8 DE with channel di-

agnostics

3.6.3 und 3.6.11 3.6.2 3.4, 4.6, 5 3.4

2.1 01.01.2019 - Specification Mechanic reworked (Version 2.1) - Adapt template to cover page and structure of corporate template

component. - Change to valves (MS and KS) with mechanical spring return - Add supply plate code X - Change remarks

3.4 and 4.4 3.4 and 4.5 4.6

2.2 01.01.2020 - Specification Mechanic reworked (Version 2.2) - Note added by change indicator - Contact persons updated - Delete handheld MMI (phased out) incl. accessories - Correct type code and pictures

1 3.4 3.6.3

2.3 01.01.2021 - Specification Mechanic reworked (Version 2.3) - Contact persons updated

1

2.4 01.01.2022 - Specification Mechanic reworked (Version 2.4) - Contact persons updated - add holding brakes DACS and clamping units KPE - add namur throttle plate - note “exclusively for final positions of the movements” deleted - change filedbus to FB43, delete Profibus F13 - add electronic modules - add tie rods - change service unit to new module connectors MV1 - tube PUN-…-BL changed to PUN-H-…-BL - add solenoid valve with pulse function - limitation to max. 3 modules removed - add data sheets

1 3.1.6 3.3.4.3 3.4 3.4 / 4.1 3.4 3.4 3.6.11 3.8.1 3.9.5 4.1 5

Changes to content are highlighted in grey.

Page 3: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 3 from 76

Table of content

Document Change Information ............................................................................................................ 2

1 Contact Persons .......................................................................................................................... 5

2 Notes ............................................................................................................................................. 6

2.1 Purpose to use ........................................................................................................................ 6

3 Overview - Release list for components ................................................................................... 7

3.1 Pneumatic Drives .................................................................................................................... 7 3.1.1 Standard based piston rod cylinders ................................................................................. 7

Standard cylinders to ISO 15552 – diameter 32 to 200 .............................................. 7 Round cylinders to ISO 6432 ...................................................................................... 9 Compact cylinders to ISO 21287 ................................................................................ 9 Compact cylinders to ISO 21287 non-rotating .......................................................... 10

3.1.2 Rodless cylinders ............................................................................................................ 11 3.1.3 Rotary drives ................................................................................................................... 13

Rotary drives with rack and pinion ............................................................................ 13 Rotary drive with swivel wing .................................................................................... 14

3.1.4 Guided drives .................................................................................................................. 15 3.1.5 Mounting elements for drives .......................................................................................... 16 3.1.6 Clamping elements .......................................................................................................... 17

3.2 Vacuum technology.............................................................................................................. 17 3.2.1 Vacuum generators ......................................................................................................... 17

3.3 Valves .................................................................................................................................... 18 3.3.1 Electrically and pneumatically actuated standard valves ................................................ 18

Standard valves according to ISO 5599-1 and accessories ..................................... 18 Standard valves to ISO 15407-1 and accessories .................................................... 19 Standard valves to VDI/VDE 3845 ............................................................................ 20

3.3.2 Mechanically operated valves ......................................................................................... 21 3.3.3 Shut-off valves ................................................................................................................. 21

Non-return valves ...................................................................................................... 21 Non-return valves piloted .......................................................................................... 21 Quick exhaust valves ................................................................................................ 22 Logic elements OR building blocks ........................................................................... 22 Logic elements AND building blocks ......................................................................... 23

3.3.4 Flow control valves .......................................................................................................... 23 One-way flow control valves ..................................................................................... 23 One-way flow control valves with roller lever ............................................................ 24 Namur throttle plate ................................................................................................... 24

3.4 Valve terminals ..................................................................................................................... 25 3.5 Sensors .................................................................................................................................. 29

3.5.1 Magnetores. Proximity switch for T-slot for inguiry of magnetic piston of cylinder.......... 29 Proximity switch ........................................................................................................ 29 Proximity switches resistant to welding spatter, weld resistant, oil resistant ............ 29 Mounting components for sensors ............................................................................ 29 Tamper-proof mounting of proximity switches .......................................................... 30 Positioning elements ................................................................................................. 30

3.5.2 Air gap sensors ................................................................................................................ 30 3.6 Compressed air treatment ................................................................................................... 31

3.6.1 On-off valves ................................................................................................................... 31 On-off valves, electrical operated ............................................................................. 31 On-off valves, manual operated ................................................................................ 31 On-off valves, pneumatic operated ........................................................................... 32

3.6.2 Pressure build-up valve ................................................................................................... 32 3.6.3 Pressure build-up and venting valves ............................................................................. 33 3.6.4 Branching module ............................................................................................................ 33

Page 4: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 4 from 76

3.6.5 Filters and filter control valves ......................................................................................... 34 3.6.6 Oiler with fill level check .................................................................................................. 35 3.6.7 Pressure regulating valves .............................................................................................. 36 3.6.8 Pressure measuring devices – Pressure gauge ............................................................. 36 3.6.9 Pressure switch mechanical, only for service units ......................................................... 37 3.6.10 Pressure amplifier ............................................................................................................ 37 3.6.11 Standard service units according to VW Guideline ......................................................... 38

3.7 Safety oriented pneumatics ................................................................................................. 49 3.7.1 Safety oriented valves ..................................................................................................... 49 3.7.2 Safe components for air treatment .................................................................................. 50

3.8 Pneumatic connection technology ..................................................................................... 50 3.8.1 Calibrated outside tubing ................................................................................................. 50 3.8.2 Push in fittings ................................................................................................................. 51

3.9 Other pneumatic equipment ................................................................................................ 52 3.9.1 Energy efficient air blowing applications ......................................................................... 52 3.9.2 Pneumatic timer ............................................................................................................... 52 3.9.3 Time delay valve .............................................................................................................. 52 3.9.4 After blow module ............................................................................................................ 53 3.9.5 Solenoid valve with pulse function .................................................................................. 53 3.9.6 Silencer ............................................................................................................................ 53

4 Guideline CPX/MPA valve terminals ........................................................................................ 54

4.1 Structure of a CPX/MPA-valve terminal of release list ..................................................... 54 4.2 Structure of the electric modules ....................................................................................... 56 4.3 Connection of interlinking blocks ....................................................................................... 57 4.4 Valve functions ..................................................................................................................... 58 4.5 Pneumatics-Interface / Compressed air supply, Pilot air supply for MPA ..................... 59 4.6 Control air switching valve and pressure switch .............................................................. 60 4.7 Connecting plates / Electrical module for Fieldbus MPA1 and MPA2 ............................ 61 4.8 Constructive structure of the pneumatics part of the valve terminal ............................. 62 4.9 Note for creation of pressure zones ................................................................................... 63

5 Data sheets ................................................................................................................................. 64

Page 5: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 5 from 76

1 Contact Persons

Festo SE & Co. KG

Ruiter Straße 82

D - 73734 Esslingen

Tel.: +49 (0) 711-347-0

Fax: +49 (0) 711-347-2628

Germany Responsibility Contact Details

Thorsten Bruns

Global Key Account Manager

Volkswagen Components

Support of Location:

Salzgitter, Braunschweig

Tel.: + 49 (0) 711-347-53614

Fax: + 49 (0) 711-34754-53614

E-Mail: [email protected]

Axel Flak

Global Key Account Manager Audi

Tel.: +49 (0) 711-347-57718

Fax: +49 (0) 711-34754-57718

E-Mail: [email protected]

Thorsten Weiß

Project-Management

Support OEM International Tel.: +49 (0) 711-347-2030

Fax: +49 (0) 711-34754-2030

E-Mail: [email protected]

Germany Responsibility Contact Details

Thomas Kiesewalter

Support Powertrain Plant

Support of Location:

Baunatal

Tel.: + 49 (0) 711-347-10476

Fax: + 49 (0) 711-34754-10476

E-Mail: [email protected]

Mike Conradi

Support Powertrain Plant

Support of Location:

Chemnitz

Tel.: + 49 (0) 711-347-10499

Fax: + 49 (0) 711-34754-10499

E-Mail: [email protected]

Lothar Raubaum

Support Assembly Plant

Support of Location:

Wolfsburg, Hannover, Emden

and Osnabrück

Tel.: +49 (0) 711-347-10513

Fax: +49 (0) 711-34754-10513

E-Mail: [email protected]

Poland Responsibility Contact Details

Piotr Wanielista

Sales Manager

Support Volkswagen Poland Tel.: + 48 (88) 2081-367

E-Mail: [email protected]

Hungary Responsibility Contact Details

Jozsef Kurnyek

Sales Engineer

Support Audi Hungary Tel.: + 36 (30) 9315645

Fax: + 36 (1)4365-101

E-Mail: [email protected]

Czech Republic Responsibility Contact Details

Milan Skorpik

Industry Segment Manager

Support Skoda Czech Republic Tel.: + 420 (702) 200-514

E-Mail: [email protected]

Page 6: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 6 from 76

2 Notes

The basis for the following approval list is the Specification Sheet Mechanics for the Component Produc-

tion of the Volkswagen Group in the respective current issue. The respective requirements and restrictions

must be observed.

2.1 Purpose to use

The products of Festo Vertrieb GmbH & Co. KG listed in this release list are intended to cover the require-ments in the production areas engine, transmission, chassis and foundry of the Volkswagen Group and must be as far as possible in the sense of rational procurement, planning, maintenance and warehousing be used.

If, for project-specific reasons, deviations are required for a better solution of the production tasks, the special components must be coordinated with the customer in good time.

The operating manuals of VW AG, Mechanik-BV 1.10, Hydraulik-BV 1.12, Pneumatics-BV 1.13 and Lubrica-

tion-BV 1.17 are not valid with specification and compliance with this LH for the production areas engine, gear-

box, chassis and foundry of the Volkswagen Group.

The released products are limited to the respective part numbers of Festo Vertrieb GmbH & Co. KG.

The release list does not release the requirement Specification Sheet Mechanics for the Component Pro-duction of the Volkswagen Group.

The general terms and conditions of Festo AG & Co. KG apply to you.

Page 7: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 7 from 76

3 Overview - Release list for components

3.1 Pneumatic Drives

3.1.1 Standard based piston rod cylinders

Standard cylinders to ISO 15552 – diameter 32 to 200

Name Type Comment Picture Documentation

Standard cylinder DSBC ISO 15552

DSBC-...-PPVA-N3 Diameter 32, 50, 63, 80, 100, 125 mm

Stroke length 25 ... 500 mm

Force 483 ... 7 363 N

Double acting

Position detection

Damping adjustable

Catalogue

Documentation

Standard cylinder DSBG ISO 15552

DSBG-...-PPVA-N3 Diameter 160 and 200 mm

Stroke length 25 ... 500 mm

Force 12064 ... 18850 N

Double acting

Position detection

Damping adjustable

Catalogue

Documentation

Part number Type Name Links

1376422 DSBC-32-25-PPVA-N3 Standard cylinder

1376424 DSBC-32-50-PPVA-N3 Standard cylinder

1376425 DSBC-32-80-PPVA-N3 Standard cylinder

1376426 DSBC-32-100-PPVA-N3 Standard cylinder

1376427 DSBC-32-125-PPVA-N3 Standard cylinder

1376428 DSBC-32-160-PPVA-N3 Standard cylinder

1376429 DSBC-32-200-PPVA-N3 Standard cylinder

1376430 DSBC-32-250-PPVA-N3 Standard cylinder

1376431 DSBC-32-320-PPVA-N3 Standard cylinder

1376432 DSBC-32-400-PPVA-N3 Standard cylinder

1376433 DSBC-32-500-PPVA-N3 Standard cylinder

1366948 DSBC-50-25-PPVA-N3 Standard cylinder

1366950 DSBC-50-50-PPVA-N3 Standard cylinder

1366951 DSBC-50-80-PPVA-N3 Standard cylinder

1366952 DSBC-50-100-PPVA-N3 Standard cylinder

1366953 DSBC-50-125-PPVA-N3 Standard cylinder

1366954 DSBC-50-160-PPVA-N3 Standard cylinder

1366955 DSBC-50-200-PPVA-N3 Standard cylinder

1366956 DSBC-50-250-PPVA-N3 Standard cylinder

1366957 DSBC-50-320-PPVA-N3 Standard cylinder

1366958 DSBC-50-400-PPVA-N3 Standard cylinder

1366959 DSBC-50-500-PPVA-N3 Standard cylinder

1383578 DSBC-63-25-PPVA-N3 Standard cylinder

1383580 DSBC-63-50-PPVA-N3 Standard cylinder

1383581 DSBC-63-80-PPVA-N3 Standard cylinder

1383582 DSBC-63-100-PPVA-N3 Standard cylinder

1383583 DSBC-63-125-PPVA-N3 Standard cylinder

1383584 DSBC-63-160-PPVA-N3 Standard cylinder

Page 8: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 8 from 76

Part number Type Name Links

1383585 DSBC-63-200-PPVA-N3 Standard cylinder

1383586 DSBC-63-250-PPVA-N3 Standard cylinder

1383587 DSBC-63-320-PPVA-N3 Standard cylinder

1383588 DSBC-63-400-PPVA-N3 Standard cylinder

1383589 DSBC-63-500-PPVA-N3 Standard cylinder

1383333 DSBC-80-25-PPVA-N3 Standard cylinder

1383335 DSBC-80-50-PPVA-N3 Standard cylinder

1383336 DSBC-80-80-PPVA-N3 Standard cylinder

1383337 DSBC-80-100-PPVA-N3 Standard cylinder

1383338 DSBC-80-125-PPVA-N3 Standard cylinder

1383339 DSBC-80-160-PPVA-N3 Standard cylinder

1383340 DSBC-80-200-PPVA-N3 Standard cylinder

1383341 DSBC-80-250-PPVA-N3 Standard cylinder

1383342 DSBC-80-320-PPVA-N3 Standard cylinder

1383343 DSBC-80-400-PPVA-N3 Standard cylinder

1383344 DSBC-80-500-PPVA-N3 Standard cylinder

1384804 DSBC-100-25-PPVA-N3 Standard cylinder

1384806 DSBC-100-50-PPVA-N3 Standard cylinder

1384807 DSBC-100-80-PPVA-N3 Standard cylinder

1384808 DSBC-100-100-PPVA-N3 Standard cylinder

1384809 DSBC-100-125-PPVA-N3 Standard cylinder

1384810 DSBC-100-160-PPVA-N3 Standard cylinder

1384811 DSBC-100-200-PPVA-N3 Standard cylinder

1384812 DSBC-100-250-PPVA-N3 Standard cylinder

1384813 DSBC-100-320-PPVA-N3 Standard cylinder

1384814 DSBC-100-400-PPVA-N3 Standard cylinder

1384815 DSBC-100-500-PPVA-N3 Standard cylinder

1804956 DSBC-125-25-PPVA-N3 Standard cylinder

1804958 DSBC-125-50-PPVA-N3 Standard cylinder

1804959 DSBC-125-80-PPVA-N3 Standard cylinder

1804960 DSBC-125-100-PPVA-N3 Standard cylinder

1804961 DSBC-125-125-PPVA-N3 Standard cylinder

1804962 DSBC-125-160-PPVA-N3 Standard cylinder

1804963 DSBC-125-200-PPVA-N3 Standard cylinder

1804964 DSBC-125-250-PPVA-N3 Standard cylinder

1804965 DSBC-125-320-PPVA-N3 Standard cylinder

1804966 DSBC-125-400-PPVA-N3 Standard cylinder

1804967 DSBC-125-500-PPVA-N3 Standard cylinder

2029462 DSBG-160-25-PPVA-N3 Standard cylinder

2029464 DSBG-160-50-PPVA-N3 Standard cylinder

2029465 DSBG-160-80-PPVA-N3 Standard cylinder

2029466 DSBG-160-100-PPVA-N3 Standard cylinder

2029467 DSBG-160-125-PPVA-N3 Standard cylinder

2029468 DSBG-160-160-PPVA-N3 Standard cylinder

2029469 DSBG-160-200-PPVA-N3 Standard cylinder

2029470 DSBG-160-250-PPVA-N3 Standard cylinder

2029471 DSBG-160-320-PPVA-N3 Standard cylinder

2029472 DSBG-160-400-PPVA-N3 Standard cylinder

2029473 DSBG-160-500-PPVA-N3 Standard cylinder

2390139 DSBG-200-25-PPVA-N3 Standard cylinder

Page 9: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 9 from 76

Part number Type Name Links

2390141 DSBG-200-50-PPVA-N3 Standard cylinder

2390142 DSBG-200-80-PPVA-N3 Standard cylinder

2390143 DSBG-200-100-PPVA-N3 Standard cylinder

2390144 DSBG-200-125-PPVA-N3 Standard cylinder

2390145 DSBG-200-160-PPVA-N3 Standard cylinder

2390146 DSBG-200-200-PPVA-N3 Standard cylinder

2390147 DSBG-200-250-PPVA-N3 Standard cylinder

2390148 DSBG-200-320-PPVA-N3 Standard cylinder

2390149 DSBG-200-400-PPVA-N3 Standard cylinder

2390150 DSBG-200-500-PPVA-N3 Standard cylinder

Round cylinders to ISO 6432

Name Type Comment Picture Documentation

Round cylinder DSNU

ISO 6432

DSNU-...-P-A Diameter 10, 16, 25 mm

Stroke length 25, 50, 100 mm

Force 19 ... 1870 N

Double acting

Position detection

Damping fixed

Mounting flange

Male thread

Catalogue

Documentation

Part number Type Name Links

19184 DSNU-10-25-P-A Round cylinder

19186 DSNU-10-50-P-A Round cylinder

19188 DSNU-10-100-P-A Round cylinder

19199 DSNU-16-25-P-A Round cylinder

19201 DSNU-16-50-P-A Round cylinder

19203 DSNU-16-100-P-A Round cylinder

19219 DSNU-25-25-P-A Round cylinder

19221 DSNU-25-50-P-A Round cylinder

19223 DSNU-25-100-P-A Round cylinder

Compact cylinders to ISO 21287

Name Type Comment Picture Documentation

Compact cylinder ADN

ISO 21287

ADN-...-I-P-A Diameter 20, 32, 40, 50, 63, 80 mm

Stroke length 10, 20, 30, 40, 50 mm

Force 51 ... 7 363 N

Double acting

Damping fixed

Inside thread

Catalogue

Documentation

Part number Type Name Links

536243 ADN-20-10-I-P-A Compact cylinder

Page 10: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 10 from 76

Part number Type Name Links

536245 ADN-20-20-I-P-A Compact cylinder

536247 ADN-20-30-I-P-A Compact cylinder

536248 ADN-20-40-I-P-A Compact cylinder

536249 ADN-20-50-I-P-A Compact cylinder

536279 ADN-32-10-I-P-A Compact cylinder

536281 ADN-32-20-I-P-A Compact cylinder

536283 ADN-32-30-I-P-A Compact cylinder

536284 ADN-32-40-I-P-A Compact cylinder

536285 ADN-32-50-I-P-A Compact cylinder

536300 ADN-40-10-I-P-A Compact cylinder

536302 ADN-40-20-I-P-A Compact cylinder

536304 ADN-40-30-I-P-A Compact cylinder

536305 ADN-40-40-I-P-A Compact cylinder

536306 ADN-40-50-I-P-A Compact cylinder

536321 ADN-50-10-I-P-A Compact cylinder

536323 ADN-50-20-I-P-A Compact cylinder

536325 ADN-50-30-I-P-A Compact cylinder

536326 ADN-50-40-I-P-A Compact cylinder

536327 ADN-50-50-I-P-A Compact cylinder

536342 ADN-63-10-I-P-A Compact cylinder

536344 ADN-63-20-I-P-A Compact cylinder

536346 ADN-63-30-I-P-A Compact cylinder

536347 ADN-63-40-I-P-A Compact cylinder

536348 ADN-63-50-I-P-A Compact cylinder

536363 ADN-80-10-I-P-A Compact cylinder

536365 ADN-80-20-I-P-A Compact cylinder

536367 ADN-80-30-I-P-A Compact cylinder

536368 ADN-80-40-I-P-A Compact cylinder

536369 ADN-80-50-I-P-A Compact cylinder

Compact cylinders to ISO 21287 non-rotating

Name Type Comment Picture Documentation

Compact cylinder ADNGF, metric, non-rotating, ISO 21287

ADNGF-...-P-A Diameter 20, 32, 40, 50, 63, 80 mm

Stroke length 10, 20, 30, 40, 50 mm

Force 68 ... 4712 N

Position detection

Damping fixed

Male thread

Catalogue

Documentation

Part number Type Name Links

554221 ADNGF-20-10-P-A Compact cylinder

554223 ADNGF-20-20-P-A Compact cylinder

554225 ADNGF-20-30-P-A Compact cylinder

554226 ADNGF-20-40-P-A Compact cylinder

554227 ADNGF-20-50-P-A Compact cylinder

554239 ADNGF-32-10-P-A Compact cylinder

554241 ADNGF-32-20-P-A Compact cylinder

Page 11: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 11 from 76

Part number Type Name Links

554243 ADNGF-32-30-P-A Compact cylinder

554244 ADNGF-32-40-P-A Compact cylinder

554245 ADNGF-32-50-P-A Compact cylinder

554249 ADNGF-40-10-P-A Compact cylinder

554251 ADNGF-40-20-P-A Compact cylinder

554253 ADNGF-40-30-P-A Compact cylinder

554254 ADNGF-40-40-P-A Compact cylinder

554255 ADNGF-40-50-P-A Compact cylinder

554259 ADNGF-50-10-P-A Compact cylinder

554261 ADNGF-50-20-P-A Compact cylinder

554263 ADNGF-50-30-P-A Compact cylinder

554264 ADNGF-50-40-P-A Compact cylinder

554265 ADNGF-50-50-P-A Compact cylinder

554268 ADNGF-63-10-P-A Compact cylinder

554270 ADNGF-63-20-P-A Compact cylinder

554272 ADNGF-63-30-P-A Compact cylinder

554273 ADNGF-63-40-P-A Compact cylinder

554274 ADNGF-63-50-P-A Compact cylinder

554277 ADNGF-80-10-P-A Compact cylinder

554279 ADNGF-80-20-P-A Compact cylinder

554281 ADNGF-80-30-P-A Compact cylinder

554282 ADNGF-80-40-P-A Compact cylinder

554283 ADNGF-80-50-P-A Compact cylinder

3.1.2 Rodless cylinders

Name Type Comment Picture Documentation

Linear drives DGC, with guiding

DGC-... Diameter 32, 50, 63 mm

Stroke length 1 ... 8500 mm

Force 30 ... 1870 N

Position detection

Different damping options possible:

Guiding variants:

- Basic version

- Slide

- Ball bearing guide

Catalogue

Documentation

Linear drives DGC-K, with-out guiding

DGC-K-... Diameter 32, 50, 63, 80 mm

Stroke length 1 ... 8500 mm

Force 153 ... 3016 N

Position detection

Without external guidance for simple drive functions

Catalogue

Documentation

Part number Type Name Links

532448 DGC-32-125-GF-PPV-A Linear drive

532448 DGC-32-160-GF-PPV-A Linear drive

532448 DGC-32-200-GF-PPV-A Linear drive

Page 12: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 12 from 76

Part number Type Name Links

532448 DGC-32-250-GF-PPV-A Linear drive

532448 DGC-32-320-GF-PPV-A Linear drive

532448 DGC-32-400-GF-PPV-A Linear drive

532448 DGC-32-500-GF-PPV-A Linear drive

532448 DGC-32-1000-GF-PPV-A Linear drive

532448 DGC-32-125-KF-PPV-A Linear drive

532448 DGC-32-160-KF-PPV-A Linear drive

532448 DGC-32-200-KF-PPV-A Linear drive

532448 DGC-32-250-KF-PPV-A Linear drive

532448 DGC-32-320-KF-PPV-A Linear drive

532448 DGC-32-400-KF-PPV-A Linear drive

532448 DGC-32-500-KF-PPV-A Linear drive

532448 DGC-32-1000-KF-PPV-A Linear drive

532450 DGC-50-125-GF-PPV-A Linear drive

532450 DGC-50-160-GF-PPV-A Linear drive

532450 DGC-50-200-GF-PPV-A Linear drive

532450 DGC-50-250-GF-PPV-A Linear drive

532450 DGC-50-320-GF-PPV-A Linear drive

532450 DGC-50-400-GF-PPV-A Linear drive

532450 DGC-50-500-GF-PPV-A Linear drive

532450 DGC-50-1000-GF-PPV-A Linear drive

532450 DGC-50-125-KF-PPV-A Linear drive

532450 DGC-50-160-KF-PPV-A Linear drive

532450 DGC-50-200-KF-PPV-A Linear drive

532450 DGC-50-250-KF-PPV-A Linear drive

532450 DGC-50-320-KF-PPV-A Linear drive

532450 DGC-50-400-KF-PPV-A Linear drive

532450 DGC-50-500-KF-PPV-A Linear drive

532450 DGC-50-1000-KF-PPV-A Linear drive

532451 DGC-63-160-GF-PPV-A Linear drive

532451 DGC-63-200-GF-PPV-A Linear drive

532451 DGC-63-250-GF-PPV-A Linear drive

532451 DGC-63-320-GF-PPV-A Linear drive

532451 DGC-63-400-GF-PPV-A Linear drive

532451 DGC-63-500-GF-PPV-A Linear drive

532451 DGC-63-1000-GF-PPV-A Linear drive

1312502 DGC-K-32-125-PPV-A-GK Linear drive

1312502 DGC-K-32-160-PPV-A-GK Linear drive

1312502 DGC-K-32-200-PPV-A-GK Linear drive

1312502 DGC-K-32-250-PPV-A-GK Linear drive

1312502 DGC-K-32-320-PPV-A-GK Linear drive

1312502 DGC-K-32-400-PPV-A-GK Linear drive

1312502 DGC-K-32-500-PPV-A-GK Linear drive

1312502 DGC-K-32-1000-PPV-A-GK Linear drive

1312504 DGC-K-50-125-PPV-A-GK Linear drive

1312504 DGC-K-50-160-PPV-A-GK Linear drive

1312504 DGC-K-50-200-PPV-A-GK Linear drive

1312504 DGC-K-50-250-PPV-A-GK Linear drive

1312504 DGC-K-50-320-PPV-A-GK Linear drive

1312504 DGC-K-50-400-PPV-A-GK Linear drive

Page 13: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 13 from 76

Part number Type Name Links

1312504 DGC-K-50-500-PPV-A-GK Linear drive

1312504 DGC-K-50-1000-PPV-A-GK Linear drive

1312505 DGC-K-63-125-PPV-A-GK Linear drive

1312505 DGC-K-63-160-PPV-A-GK Linear drive

1312505 DGC-K-63-200-PPV-A-GK Linear drive

1312505 DGC-K-63-250-PPV-A-GK Linear drive

1312505 DGC-K-63-320-PPV-A-GK Linear drive

1312505 DGC-K-63-400-PPV-A-GK Linear drive

1312505 DGC-K-63-500-PPV-A-GK Linear drive

1312505 DGC-K-63-1000-PPV-A-GK Linear drive

1312506 DGC-K-80-125-PPV-A-GK Linear drive

1312506 DGC-K-80-160-PPV-A-GK Linear drive

1312506 DGC-K-80-200-PPV-A-GK Linear drive

1312506 DGC-K-80-250-PPV-A-GK Linear drive

1312506 DGC-K-80-320-PPV-A-GK Linear drive

1312506 DGC-K-80-400-PPV-A-GK Linear drive

1312506 DGC-K-80-500-PPV-A-GK Linear drive

1312506 DGC-K-80-1000-PPV-A-GK Linear drive

3.1.3 Rotary drives

Rotary drives with rack and pinion

Name Type Comment Picture Documentation

Semi-rotary drives DRRD DRRD-... Size 8, 10, 12, 16, 20, 25, 32, 35, 40, 50, 63 mm

Torque 0.2 ... 112 Nm

Swivel angle 0 ... 180°

Position sensing

Cushioning: elastic (P), hy-draulic shock absorbers

Flanged shaft

Catalogue

Documentation

Part number Type Name Links

1577238 DRRD-16-180-FH-PA semi-rotary drive

1395606 DRRD-20-180-FH-PA semi-rotary drive

1359980 DRRD-25-180-FH-PA semi-rotary drive

1578512 DRRD-32-180-FH-PA semi-rotary drive

1526825 DRRD-35-180-FH-PA semi-rotary drive

1503269 DRRD-40-180-FH-PA semi-rotary drive

574405 (*) DRRD-50-180-FH-Y9A semi-rotary drive

574407 (*) DRRD-63-180-FH-Y9A semi-rotary drive

(*) It is a configurable product.

Page 14: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 14 from 76

Rotary drive with swivel wing

Name Type Comment Picture Documentation

Semi-rotary drives DRVS DRVS-... Size 12, 16, 25, 32, 40 mm

Torque 0.15 ... 20 Nm

Swivel angle 90, 180, 270°

Position sensing

Fixed elastic cushioning el-ements on both sides

Catalogue

Documentation

Swivel module DSM DSM-...-B Size 12, 16, 25, 32, 40 mm

Torque 0,15 ... 80 Nm

Swivel angle 0 - 270°

Position detection

Damping adjustable

Catalogue

Documentation

Part number Type Name Links

1845710 DRVS-12-90-P semi-rotary drive

1845711 DRVS-12-180-P semi-rotary drive

1845712 DRVS-12-270-P semi-rotary drive

1845713 DRVS-16-90-P semi-rotary drive

1845714 DRVS-16-180-P semi-rotary drive

1845715 DRVS-16-270-P semi-rotary drive

1845716 DRVS-25-90-P semi-rotary drive

1845717 DRVS-25-180-P semi-rotary drive

1845718 DRVS-25-270-P semi-rotary drive

1845719 DRVS-32-90-P semi-rotary drive

1845720 DRVS-32-180-P semi-rotary drive

1845721 DRVS-32-270-P semi-rotary drive

1845722 DRVS-40-90-P semi-rotary drive

1845723 DRVS-40-180-P semi-rotary drive

1845724 DRVS-40-270-P semi-rotary drive

547572 DSM-12-270-CC-A-B Swivel module

547570 DSM-12-270-P-A-B Swivel module

547576 DSM-16-270-CC-A-B Swivel module

547574 DSM-16-270-P-A-B Swivel module

547580 DSM-25-270-CC-A-B Swivel module

547578 DSM-25-270-P-A-B Swivel module

547584 DSM-32-270-CC-A-B Swivel module

547582 DSM-32-270-P-A-B Swivel module

547588 DSM-40-270-CC-A-B Swivel module

547586 DSM-40-270-P-A-B Swivel module

Page 15: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 15 from 76

3.1.4 Guided drives

Name Type Comment Picture Links

Guided drives DFM, metric DFM-... Diameter 12, 16, 20, 25, 32, 40, 50, 63 mm

Stroke length 10 ... 400 mm

Force 51 ... 4712 N

Position sensing

Fixed/adjustable cushion-ing

Plain-bearing guide

Recirculating ball bearing guide

Catalogue

Documentation

Part number Type Name Links

170824 DFM-12-10-P-A-GF guided drive

170899 DFM-12-10-P-A-KF guided drive

170826 DFM-12-25-P-A-GF guided drive

170901 DFM-12-25-P-A-KF guided drive

170828 DFM-12-40-P-A-GF guided drive

170903 DFM-12-40-P-A-KF guided drive

170829 DFM-12-50-P-A-GF guided drive

170904 DFM-12-50-P-A-KF guided drive

170830 DFM-12-80-P-A-GF guided drive

170905 DFM-12-80-P-A-KF guided drive

170831 DFM-12-100-P-A-GF guided drive

170906 DFM-12-100-P-A-KF guided drive

170832 DFM-16-10-P-A-GF guided drive

170907 DFM-16-10-P-A-KF guided drive

170834 DFM-16-25-P-A-GF guided drive

170909 DFM-16-25-P-A-KF guided drive

170836 DFM-16-40-P-A-GF guided drive

170911 DFM-16-40-P-A-KF guided drive

170837 DFM-16-50-P-A-GF guided drive

170912 DFM-16-50-P-A-KF guided drive

170838 DFM-16-80-P-A-GF guided drive

170913 DFM-16-80-P-A-KF guided drive

170839 DFM-16-100-P-A-GF guided drive

170914 DFM-16-100-P-A-KF guided drive

170848 DFM-25-25-P-A-GF guided drive

170923 DFM-25-25-P-A-KF guided drive

170850 DFM-25-40-P-A-GF guided drive

170925 DFM-25-40-P-A-KF guided drive

170851 DFM-25-50-P-A-GF guided drive

170926 DFM-25-50-P-A-KF guided drive

170852 DFM-25-80-P-A-GF guided drive

170927 DFM-25-80-P-A-KF guided drive

170853 DFM-25-100-P-A-GF guided drive

170928 DFM-25-100-P-A-KF guided drive

170855 DFM-32-25-P-A-GF guided drive

170930 DFM-32-25-P-A-KF guided drive

Page 16: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 16 from 76

Part number Type Name Links

170857 DFM-32-40-P-A-GF guided drive

170932 DFM-32-40-P-A-KF guided drive

170858 DFM-32-50-P-A-GF guided drive

170933 DFM-32-50-P-A-KF guided drive

170859 DFM-32-80-P-A-GF guided drive

170934 DFM-32-80-P-A-KF guided drive

170860 DFM-32-100-P-A-GF guided drive

170935 DFM-32-100-P-A-KF guided drive

170861 DFM-32-125-P-A-GF guided drive

170936 DFM-32-125-P-A-KF guided drive

170862 DFM-32-160-P-A-GF guided drive

170937 DFM-32-160-P-A-KF guided drive

170863 DFM-32-200-P-A-GF guided drive

170938 DFM-32-200-P-A-KF guided drive

170871 DFM-50-25-P-A-GF guided drive

170946 DFM-50-25-P-A-KF guided drive

170872 DFM-50-50-P-A-GF guided drive

170947 DFM-50-50-P-A-KF guided drive

170873 DFM-50-80-P-A-GF guided drive

170948 DFM-50-80-P-A-KF guided drive

170874 DFM-50-100-P-A-GF guided drive

170949 DFM-50-100-P-A-KF guided drive

170875 DFM-50-125-P-A-GF guided drive

170950 DFM-50-125-P-A-KF guided drive

170876 DFM-50-160-P-A-GF guided drive

170951 DFM-50-160-P-A-KF guided drive

170877 DFM-50-200-P-A-GF guided drive

170952 DFM-50-200-P-A-KF guided drive

170878 DFM-63-25-P-A-GF guided drive

170953 DFM-63-25-P-A-KF guided drive

170879 DFM-63-50-P-A-GF guided drive

170954 DFM-63-50-P-A-KF guided drive

170880 DFM-63-80-P-A-GF guided drive

170955 DFM-63-80-P-A-KF guided drive

170881 DFM-63-100-P-A-GF guided drive

170956 DFM-63-100-P-A-KF guided drive

170882 DFM-63-125-P-A-GF guided drive

170957 DFM-63-125-P-A-KF guided drive

170883 DFM-63-160-P-A-GF guided drive

170958 DFM-63-160-P-A-KF guided drive

170884 DFM-63-200-P-A-GF guided drive

170959 DFM-63-200-P-A-KF guided drive

3.1.5 Mounting elements for drives

Name Type Comment Picture Documentation

Covers caps AKM-... Slot covers for protecting sensors and mounting grooves on cylinders, linear drives and linear axes.

Catalogue

Documentation

Page 17: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 17 from 76

Part number Type Name Links

549194 AKM-12 Cover cap

549195 AKM-16 Cover cap

549196 AKM-25 Cover cap

549197 AKM-32 Cover cap

549198 AKM-40 Cover cap

3.1.6 Clamping elements

Name Type Comment Picture Documentation

Holding brakes DACS DACS-... Holding brake with and without load for static and rare dynamic applications.

Catalogue

Documentation

Clamping units KPE KPE-... For round material 12, 16, 20, 25, 32 mm.

Catalogue

Documentation

Part no. Order code Name Links

8072770 DACS-16-A-S Holding brake

8072771 DACS-20-A-S Holding brake

8072772 DACS-25-A-S Holding brake

8072773 DACS-40-A-S Holding brake

178466 KPE-12 clamping unit

178467 KPE-16 clamping unit

178468 KPE-20 clamping unit

178469 KPE-25 clamping unit

178470 KPE-32 clamping unit

3.2 Vacuum technology

3.2.1 Vacuum generators

Name Type Comment Picture Links

OVEM vacuum generator, metric

OVEM-... Nominal diameter 0.45 ... 2.0 mm

Port

-Plug connector QS6, QS8

Solenoid valve vacuum IN/OUT

Solenoid valve for ejector pulse

Integrated vacuum switch.

Catalogue

Documentation

Vacuum generators VN, pneumatic

VN-... Nominal size 0.45 to 3 mm

Connection

-Plug connector QS4, QS6, QS8, QS10, QS12

-Thread M5, G1/8, G1/4, G3/8

Catalogue

Documentation

Page 18: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 18 from 76

-Push-in sleeve 4.6 mm

Standard

-Vacuum port 90° to supply port

Inline

-Vacuum port in line with supply port

Ejector pulse valve, pneu-matic.

Part number Type Name Links

539074 OVEM-07-H-B-GN-OE-N-2P vacuum generator

539074 OVEM-10-H-B-GN-OE-N-2P vacuum generator

539074 OVEM-14-H-B-GN-OE-N-2P vacuum generator

539074 OVEM-20-H-B-GN-OE-N-2P vacuum generator

193498 VN-05-H-T3-PI4-VI4-RI4 vacuum generator

193499 VN-07-H-T3-PI4-VI4-RI4 vacuum generator

193500 VN-10-H-T3-PI4-VI4-RI4 vacuum generator

193502 VN-14-H-T4-PI4-VI5-RI5 vacuum generator

3.3 Valves

3.3.1 Electrically and pneumatically actuated standard valves

Standard valves according to ISO 5599-1 and accessories

Name Type Comment Picture Documentation

Standard valves

ISO 5599-1

Standard valves VSVA with central plug

JMEBH-...

MEBH-...

JD-...

VL-...

VSVA-…

Connection ISO1; ISO3

Flow rate 1200 ... 6000 l/min

Voltage 24 V DC

Connecting plate valve

- Electrically actuated, pi-loted

- Pneumatically actuated

- Sub plates

- Linking plates

- Throttle plates

- Intermediate

pressure regulator

plates

Catalogue

Documentation

Catalogue

Documentation

Connection plates

ISO 5599-1

NAS-...

NAU-...

NAV-...

NDV-...

NEV-...

Vertical stacking modules for additional functions such as - Feed - Throttle - Pressure regulator

Catalogue

Documentation

Part number Type Name Links

561365 VSVA-B-D52-D-D1-1R5L solenoid valve

561362 VSVA-B-M52-AD-D1-1R5L solenoid valve

561367 VSVA-B-P53E-D-D1-1R5L solenoid valve

561368 VSVA-B-P53U-D-D1-1R5L solenoid valve

184510 JMEBDH-5/2-D-3-ZSR-C solenoid valve

Page 19: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 19 from 76

Part number Type Name Links

184507 MEBH-5/2-D-3-ZSR-C solenoid valve

184513 MEBH-5/3B-D-3-ZSR-C solenoid valve

184511 MEBH-5/3E-D-3-ZSR-C solenoid valve

151008 JD-5/2-D-1-C pneumatic valve

151866 JD-5/2-D-3-C pneumatic valve

151009 VL-5/2-D-1-C pneumatic valve

151864 VL-5/2-D-3-C pneumatic valve

151012 VL-5/3B-D-1-C pneumatic valve

151869 VL-5/3B-D-3-C pneumatic valve

151011 VL-5/3E-D-1-C pneumatic valve

151868 VL-5/3E-D-3-C pneumatic valve

10336 NAS-1/2-3A-ISO individual sub-base

9484 NAS-1/4-1A-ISO individual sub-base

10337 NAU-1/2-3B-ISO individual sub-base

9485 NAU-1/4-1B-ISO individual sub-base

10175 NAV-1/2-3C-ISO manifold sub-base

10173 NAV-1/4-1C-ISO manifold sub-base

9489 NDV-1-ISO blanking plate

10340 NDV-3-ISO blanking plate

10174 NEV-1DA/DB-ISO end plate kit

10176 NEV-3DA/DB-ISO end plate kit

Standard valves to ISO 15407-1 and accessories

Name Type Comment Picture Documentation

Standard valves VSVA with central plug

ISO 15407-1

(VDMA 24 563)

VSVA-... Flow rate 400 ... 1400 l/min

Voltage 24 V DC

Connection plate valve

- Electrically actuated, pi-loted

Connecting plates

Catalogue

Documentation

Standard valves VSPA

ISO 15407-1

VSPA-... Connection G1/8, ISO 02; G1/4, ISO 01

Flow rate 500 ... 1000 l/min

Connection plate valve

- Pneumatically actuated

Connecting plates

Manifold connecting plates

Catalogue

Documentation

Connection plates ISO 15407-1

NAS-...

NAW-...

NDV-...

NEV-...

Catalogue

Documentation

Page 20: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 20 from 76

Part number Type Name Links

534558 VSVA-B-D52-H-A1-1R5L Solenoid valve, 5/2 bistable, 14 dominant

534555 VSVA-B-M52-AH-A1-1R5L Solenoid valve, 5/2 monostable

534560 VSVA-B-P53E-H-A1-1R5L Solenoid valve, 5/3 exhausted

534561 VSVA-B-P53U-H-A1-1R5L Solenoid valve, 5/3 pressurized

534552 VSVA-B-T32C-AH-A1-1R5L Solenoid valve, 2 x 3/2 closed

546715 VSPA-B-D52-A1 Pneumatic valve, 5/2 bistable, 14 dominant

546716 VSPA-B-M52-A-A1 Pneumatic valve, 5/2 monostable

546719 VSPA-B-P53E-A1 Pneumatic valve, 5/3 exhausted

546718 VSPA-B-P53U-A1 Pneumatic valve, 5/3 pressurized

161109 NAS-1/4-01-VDMA Individual connecting plate

161102 NAW-1/4-01-VDMA Manifold Connecting plate

161103 NAW-1/4-01-VDMA-VL Manifold Connecting plate

161107 NDV-01-VDMA Cover plate

161104 NEV-01-VDMA End plate kit

Standard valves to VDI/VDE 3845

Name Type Comment Picture Documentation

Solenoid valves VSNC VSNC-... Connection G1/4, NPT 1/4

Flow rate 900 ...1000 l/min

Voltage 12, 24, 48 V DC, 24, 48, 120, 230 V AC

Port pattern as per NAMUR, to VDE/VDI 3845

Solenoid-actuated, piloted

Mechanical spring return

Diverse Ex solenoid sys-tems, IEC Ex, FM EX

Convertible from 5/2-way function to 3/2-way function

Catalogue

Documentation

Socket MSSD MSSD-C-24-LED-M12-SA-27400

Sockets for solenoids

Connection cross section: 0,75 … 1,5 mm².

Part number Type Name Links

8026033 (*) VSNC-F-B52-H-G14-FN-1A1 solenoid valve

8026033 (*) VSNC-FC-M52-MH-G14-FN-1A1 solenoid valve

188513 MSSD-C-24-LED-M12-SA-27400 Socket with connection M12x1

(*) It is a configurable product.

Page 21: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 21 from 76

3.3.2 Mechanically operated valves

Name Type Comment Picture Documentation

Stem actuated valve with connection G1/8

VS-3-1/8 Connection G1/8

Flow rate 80 ...140 l/min

Metal valve

- Mechanical actuated

- Convertible from

closed to open

Catalogue

Documentation

Part number Type Name Links

2334 VS-3-1/8 Stem actuated valve

3.3.3 Shut-off valves

Non-return valves

Name Type Comment Picture Documentation

Non-return valve H H-... Connection G1/8, G1/4, G3/8, G1/2, G3/4

Plug connection 2, 4, 6, 8, 10, 12 mm

Flow rate 115 ... 2230 l/min

Shut-off valve

- Screwed

Catalogue

Documentation

Part number Type Name Links

11691 H-1/2-B Non-return valve

11689 H-1/4-B Non-return valve

3324 H-1/8-A/I Non-return valve

11692 H-3/4-B Non-return valve

11690 H-3/8-B Non-return valve

Non-return valves piloted

Name Type Comment Picture Documentation

Non-return valves HGL, pi-loted

HGL-...

Only in connection with manual override HAB!

Connection G1/8, G1/4, G3/8, G1/2

Flow rate 130 ... 1600 l/min

Shut-off valve

- Pneumatic piloted non-re-turn valve.

Catalogue

Documentation

Manual override HAB HAB-... Hand lever

Manual override

Catalogue

Documentation

Page 22: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 22 from 76

Part number Type Name Links

530033 HGL-1/2-B Non-return valve

530031 HGL-1/4-B Non-return valve

530030 HGL-1/8-B Non-return valve

530032 HGL-3/8-B Non-return valve

184588 HAB-1/2 Manual override for HGL

184586 HAB-1/4 Manual override for HGL

184585 HAB-1/8 Manual override for HGL

184587 HAB-3/8 Manual override for HGL

Quick exhaust valves

Name Type Comment Picture Documentation

Quick exhaust valve SE, SEU

SE-...

SEU-...

Connection G1/8, G1/4, G3/8, G1/2. G3/4

Flow rate 300 ... 6480 l/min

Catalogue

Documentation

Part number Type Name Links

9688 SE-1/2-B Quick exhaust valve

9686 SE-1/4-B Quick exhaust valve

9685 SE-1/8-B Quick exhaust valve

2280 SE-3/4 Quick exhaust valve

9687 SE-3/8-B Quick exhaust valve

6822 SEU-1/2 Quick exhaust valve

6753 SEU-1/4 Quick exhaust valve

4616 SEU-1/8 Quick exhaust valve

6755 SEU-3/8 Quick exhaust valve

Logic elements OR building blocks

Name Type Comment Picture Documentation

OR gate OS OS-... Flow rate 100 ... 5000 l/min

G1/8, G1/4

OR function

Catalogue

Documentation

Part number Type Name Links

6682 OS-1/4-B OR gate

6681 OS-1/8-B OR gate

Page 23: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 23 from 76

Logic elements AND building blocks

Name Type Comment Picture Documentation

AND gate ZK ZK-1/8-B Flow rate 550 l/min

G1/8

AND function

Catalogue

Documentation

Part number Type Name Links

6680 ZK-1/8-B AND gate

3.3.4 Flow control valves

One-way flow control valves

Name Type Comment Picture Documentation

One-way flow control valve GRLA

GRLA-...

GRLA-…-SA

Connection M5, G 1/8, G 1/4, G 3/8, G 1/2, G 3/4

Flow rate 0 ... 4 320 l/min

Block-Flow control valve.

Special variant:

Tamper-proof with spring pin

Catalogue

Documentation

One-way flow control valve GRLZ

GRLZ-... Connection M3, M5, G1/8, G1/4, G3/8, G1/2, also available with NPT thread

Plug connection 3, 4, 6, 8, 10, 12 mm

Flow rate 0 ... 1400 l/min

Non-return and flow control valve

Catalogue

Documentation

One-way flow control valve GR, GRA

GR-...

GRA-...

Connection M5, G1/8, G1/4, G3/8, G1/2, G3/4

Plug connection 3, 4, 6, 8 mm

Flow rate 0 ... 3300 l/min

Block-Flow control valve

Catalogue

Documentation

Exhaust air flow control valve GRE

GRE-... Connection G1/8, G1/4, G3/8, G1/2, G3/4

Flow rate 0 ... 8000 l/min

Flow control valve

Catalogue

Documentation

Part number Type Name Links

151179 GRLA-1/2-B One-way flow control valve

151172 GRLA-1/4-B One-way flow control valve

151165 GRLA-1/8-B One-way flow control valve

151180 GRLA-3/4-B One-way flow control valve

151178 GRLA-3/8-B One-way flow control valve

151160 GRLA-M5-B One-way flow control valve

539717 GRLA-M5-B-SA-218543 One-way flow control valve, tamper-proof

539661 GRLA-1/8-B-SA-218537 One-way flow control valve, tamper-proof

539662 GRLA-1/4-B-SA-218536 One-way flow control valve, tamper-proof

Page 24: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 24 from 76

Part number Type Name Links

539715 GRLA-3/8-B-SA-218541 One-way flow control valve, tamper-proof

539716 GRLA-1/2-B-SA-218540 One-way flow control valve, tamper-proof

539714 GRLA-3/4-B-SA-218542 One-way flow control valve, tamper-proof

151195 GRLZ-1/4-B One-way flow control valve

151188 GRLZ-1/8-B One-way flow control valve

3720 GR-1/2 One-way flow control valve

151215 GR-1/8-B One-way flow control valve

2103 GR-3/4 One-way flow control valve

6308 GR-3/8-B One-way flow control valve

6509 GRA-1/4-B One-way flow control valve

151213 GR-M5-B One-way flow control valve

10351 GRE-1/8 Exhaust air flow control valve

One-way flow control valves with roller lever

Name Type Comment Picture Documentation

One-way flow control valve with roller lever GRR

GRR-1/2 Connection G1/2

Flow rate 0 ... 1 300 l/min

Block-Flow control valve.

Catalogue

Documentation

Part number Type Name Links

2111 GRR-1/2 One-way flow control valve

Namur throttle plate

Name Bestellcode Bemerkungen Bild Dokumentation

Namur throttle plate VABF VABF-1/8-CS-1637036-A Connection G1/8

Drawing

Teile-Nr. Bestellcode Name Links

23297733 VABF-1/8-CS-1637036-A Namur throttle plate with GRLA

Page 25: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 25 from 76

3.4 Valve terminals

Name Type Comment Picture Documentation

Valve terminal MPA-S with CPX-Terminal

(Typ 32)

MPA

32P-…

Sub-bus systems are not approved!

Flow rate 360 and 700 l/min

Width 10 mm (Size 1), 20 mm (Size 2)

Variability: flexible pressure supply

variable pressure zones, additional power supply in random position

serial valve control – to

32 valve positions or 64 so-lenoid coils

Open for ProfiNet

Pressure range-0,9 ... 10 bar

Protection class IP65

Electrical E/A and fieldbus connection by modular

electrical terminal type CPX.

Catalogue

Documentation

Electric terminal CPX CPX

50E-…

Installation variants:

Stand-alone as Remote I/O

With valve terminal MPA-S

Digital and analogue In-/Outputs

Power supply: 7/8 ", 5-pin Fieldbus connection: ProfiNet Connection technology: M12, B-coded

CPX diagnostic interface for USB adapter

Catalogue

Documentation

Part number Type Name Links

530411 MPA-FB-VI Valve terminal

197330 CPX Electric terminal

For further information and configuration assistance, we have summarized this for you in the

CPX / MPA valve terminals implementation guideline.

Page 26: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 26 from 76

CPX-Electric

Name Identcode Type Part-No. Links

End plate left -- CPX-EPL-EV 195716

Fieldbus node for Profinet IO, 2 x M12, CPX-M

without node specific connection technology

Interlinking block with system supply, 7/8", 5-pole

F43

GC

QP

CPX-FB43

CPX-GE-EV-S-7/8-5POL

8110369

541244

Connection

Input module 8DE, 0,5 A with channel diagnostics

Connection block 4xM12 (metal thread)

Interlinking block with system supply

D

GW

--

CPX-8DE-D

CPX-AB-4-M12x2-5POL-R

CPX-GE-EV

541480

541254

195742

Input module 16DE, digital, 16 digital inputs

Connection block 8xM12

Interlinking block with system supply

NM

KD

--

CPX-M-16DE-D

CPX-AB-8-M12X2-5POL

CPX-GE-EV

550202

3606900

195742

Input module 8DE, digital, 8 digital inputs

Connection block 8xM8

Interlinking block with system supply

Only after consultation with and written approval from the re-sponsible electrical department!

D

R

--

CPX-8DE-D

CPX-AB-8-M8-3POL

CPX-GE-EV

541480

195706

195742

Output module 8DA, 8 digital outputs, supply 0.5 A per channel

Connection block 4xM12, with quick-lock technology, 5-pin

Interlinking block with system supply

L

GW

--

CPX-8DA

CPX-AB-4-M12x2-5POL-R

CPX-GE-EV

541482

541254

195742

Output module 8DA, 8 digital outputs, supply 2.1 A per channel

Connection block 4xM12, with quick-lock technology, 5-pin

Interlinking block with system supply

NL

GW

--

CPX-8DA-H

CPX-AB-4-M12x2-5POL-R

CPX-GE-EV

550204

541254

195742

CPX Pneumatics interface to MPA (int. Auxiliary pilot air) D VMPA-FB-EPL-G 533370

End plate right, metal version

(Only required for CPX standalone)

Z CPX-EPR-EV 195714

Accessories:

Power supply socket 7/8 ", 5-pin GS NECU-G78G5-C2 543107

Earthing plate (5 pieces) CPX-EPFE-EV 538892

Mounting clip for Wall mounting (10 pieces) CPX-BG-RW-10X 529040

Inscription label holder CPX-ST-1 536593

M12 Cover cap (10 pieces) ISK-M12 165592

Festo Maintenance Tool incl. Adapter CPX on USB NEFC-M12G5-0.3-U1G5 547432

Download

Tie rod, for extension

Tie rod, 1 module

Tie rod, 2 modules

Tie rod, 3 modules

Tie rod, 4 modules

Tie rod, 5 modules

Tie rod, 6 modules

Tie rod, 7 modules

Tie rod, 8 modules

Tie rod, 9 modules

Tie rod, 10 modules

CPX-ZA-1-E

CPX-ZA-1

CPX-ZA-2

CPX-ZA-3

CPX-ZA-4

CPX-ZA-5

CPX-ZA-6

CPX-ZA-7

CPX-ZA-8

CPX-ZA-9

CPX-ZA-10

525418

195718

195720

195722

195724

195726

195728

195730

195732

195734

195736

Page 27: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 27 from 76

Pneumatic MPA1 (width 10 mm) and MPA2 (width 20 mm)

Name Identcode Type Part-No. Links

Internal auxiliary pilot air, ducted exhaust air V VMPA-FB-EPL-G 533370

External auxiliary pilot air, ducted exhaust air X VMPA-FB-EPL-E 533369

Pneumatic working connections 2 und 4

C MPA1: thread M7

MPA2: thread G1/8

F MPA1: QSM-M7-4-I

MPA2: QS-G1/8-6-I

153319

186107

G MPA1: QSM-M7-6-I

MPA2: QS-G1/8-8-I

153321

186109

Pneumatic working connection 1

D MPA1+MPA2: thread G1/4

K MPA1+MPA2: QS-G1/4-8-I 186110

L MPA1+MPA2: QS-G1/4-10-I 186112

Manual override pushing N VMPA-HBT-B 540897

Adapter CPX-MPA M VMPA-AP 533375

Connection block MPA1 (4 Valve positions)

Electrical interlinking module

Electronic module for fieldbus,

8 addresses, galvanically isolated

AH VMPA1-FB-AP-4-1

VMPA1-FB-EV-AB

VMPA1-FB-EMG-8

533352

537998

533361

Connection block MPA2 (2 Valve positions)

Electrical interlinking module

Electronic module for fieldbus,

4 addresses, galvanically isolated

BH VMPA2-FB-AP-2-

1

VMPA1-FB-EV-AB

VMPA2-FB-EMG-4

538000

537998

537984

Seal for connection block -- VMPA1-DP 533359

Separating seal channel 1,3,5 S VMPA1-DP-PRS 533365

Separating seal channel 1 T VMPA1-DP-P 533363

Separating seal channel 3,5 R VMPA1-DP-RS 533364

Control air switching valve and pressure switch IS MPA2-M1H-IS-PI

SPBA-P2R-G18-2P-M12-0,25

8088846

8000210

Datasheet

Connection plate for control air switching valve and pressure switch incl. seal

QBH MPA2-FB-AP-2-1-

SES

VMPA1-DP

8067282

533359

Datasheet

Datasheet

Pneumatic interface for control air switching valve X VMPA-FB-EPL-E 533369

Additional pressure supply, prepared exhaust air, if no

separating seal S, T or R (connection size G1/4)

Exhaust air plate

Electrical connection for fieldbus, pneumatic supply plate

U VMPA1-FB-SP

VMPA-AP

VMPA1-FB-EV-V

533354

533375

537999

Additional pressure supply, prepared exhaust air, if no

separating seal S, T or R (connection size G1/4)

Exhaust air plate

Electrical connection for fieldbus, pneumatic supply plate

V VMPA1-FB-SP

VMPA-AP

VMPA1-FB-EV-V

533354

533375

537999

Continue next page

Page 28: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 28 from 76

Pneumatic MPA1 (width 10 mm) and MPA2 (width 20 mm) Name Identcode Type Part-No. Links

MPA1 (width 10 mm)

MPA1: 5/2-directional control valve, monostable, mechanical spring return

MS VMPA1-M1H-MS-PI 571334

MPA1: 5/2-way-double pilot valve J VMPA1-M1H-J-PI 533343

MPA1: 5/3-directional control valve, neutral position pressurized B VMPA1-M1H-B-PI 533344

MPA1: 5/3-directional control valve, neutral position exhausted E VMPA1-M1H-E-PI 533346

MPA1: 2 x 3/2-directional control valve closed, mechanical spring return

KS VMPA1-M1H-KS-PI 556838

MPA1: cover plate for vacant position L VMPA1-RP 533351

MPA2 (width 20 mm)

MPA2: 5/2-directional control valve, monostable, mechanical spring return

MS VMPA2-M1H-MS-PI 571333

MPA2: 5/2-way-double pilot valve J VMPA2-M1H-J-PI 537953

MPA2: 5/3-directional control valve, neutral position pressurized B VMPA2-M1H-B-PI 537954

MPA2: 5/3-directional control valve, neutral position exhausted E VMPA2-M1H-E-PI 537956

MPA2: 2 x 3/2-directional control valve closed, mechanical spring return

KS VMPA2-M1H-KS-PI 568656

MPA2: cover plate for vacant position L VMPA2-RP 537962

End plate right -- VMPA-EPR 533373

Accessories:

Transparent inscription label holder per connecting plate T VMPA1-ST-1-4 533362

Mounting bracket for supplementary wall connection

(only in combination with U or V)

J VMPA-BG-RW 534416

Silencer with plug-in sleeve for exhaust air plate UC-QS-10H 526475

Silencer for connection 82/84 of the supply plate UC-M7 161418

Push-in fitting for connection 12/14, pneumatic interface QSM-M7-6-I 153321

Push-in fitting for supply connection 1 QS-G1/4-10-I 186112

Push-in fittings for connections 2/4 (MPA1) QSM-M7-6-I 153321

Small push-in fittings for connections 2/4 (MPA2) QS-G1/8-6-I 186107

Large push-in fittings for connections 2/4 (MPA2) QS-G1/8-8-I 186109

Blind plugs for connections 12/14 and 82/84 B-M7 174309

Page 29: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 29 from 76

3.5 Sensors

3.5.1 Magnetores. Proximity switch for T-slot for inguiry of magnetic piston of cylinder

A query about the magnetic piston of the cylinder is not permitted. Exceptions must be justified technically or constructively and require the written consent of the client. Fixing the switches only with a reproducible posi-tion when changing is required.

Proximity switch

Name Type Comment Picture Documentation

Proximity switch SMT-8M-A

SMT-... Voltage: 5 ... 30 V DC

Cable length: 0.1 ... 30 m

Plug connection: M8, M12

Electric

Contactless PNP, NPN

Catalogue

Documentation

Part number Type Name Links

574337 SMT-8M-A-PS-24V-E-0,3-M12 proximity sensor

574334 SMT-8M-A-PS-24V-E-0,3-M8D proximity sensor

Proximity switches resistant to welding spatter, weld resistant, oil resistant

Name Type Comment Picture Documentation

Proximity switch SDBT SDBT-... Voltage 10 ... 30 V DC

Cable length 0.3 and 5 m

Plug connection M12

Electrical

Contactless PNP, NPN

Catalogue

Documentation

Part number Type Name Links

2476855 SDBT-BSW-1L-PU-W-0.3-N-M12 proximity sensor

Mounting components for sensors

Name Type Comment Picture Documentation

Mounting components for proximity switches and sensors

SMBR-...

For round cylinder DSNU

Mounting kits for proximity sensors and sensors on various drives.

Catalogue

Documentation

Part number Type Name Links

175092 SMBR-8-10 mounting kit

175093 SMBR-8-12 mounting kit

175094 SMBR-8-16 mounting kit

175095 SMBR-8-20 mounting kit

175096 SMBR-8-25 mounting kit

Page 30: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 30 from 76

Tamper-proof mounting of proximity switches

Name Type Comment Picture Documentation

Tamper-proof mounting components for proximity switches and sensors

SAMH-... Mounting kits for proximity sensors and sensors on various drives.

Catalogue

Documentation

Part number Type Name Links

575815 SAMH-S-N8-S-MK mounting kit

575817 SAMH-S-N8-S-SC cover

Positioning elements

Name Type Comment Picture Documentation

Positioning elements SMM-... Comprehensive accessories for every appli-cation. - Mounting kits - Sensor holder - Clips

- Positioning elements

Catalogue

Documentation

Part number Type Name Links

547941 SMM-8 positioning component

3.5.2 Air gap sensors

Name Type Comment Picture Documentation

Air gap sensors SOPA SOPA-...

Use only after consulting the client!

Sensing range 20 ... 200 µm

Pressure 4 ... 7 bar

Switching outputs PNP or NPN

Integrated air jet function

Multi-coloured LCD display

Filtered compressed air, lu-bricated or unlubricated

H-rail, wall mounting, through-hole

Catalogue

Documentation

Part number Type Name Links

552130 SOPA-CM1H-R1-HQ6-2P-M12 air gap sensor

552138 SOPA-CM1H-R1-WQ6-2P-M12 air gap sensor

552131 SOPA-CM2H-R1-HQ6-2P-M12 air gap sensor

552139 SOPA-CM2H-R1-WQ6-2P-M12 air gap sensor

552132 SOPA-CM3H-R1-HQ6-2P-M12 air gap sensor

552140 SOPA-CM3H-R1-WQ6-2P-M12 air gap sensor

552133 SOPA-CM4H-R1-HQ6-2P-M12 air gap sensor

552141 SOPA-CM4H-R1-WQ6-2P-M12 air gap sensor

552146 SOPA-M1-R1-HQ6-2P-M12 air gap sensor

Page 31: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 31 from 76

3.6 Compressed air treatment

3.6.1 On-off valves

On-off valves, electrical operated

Name Type Comment Picture Documentation

On-off valve MS4-EE MS4-EE-1/4-10V24P-S Connection G1/8, G1/4, G3/8

Flow rate 1000 ... 2000 l/min.

Catalogue

Documentation

On-off valve MS6-EE MS6-EE-1/2-10V24P-S Connection G1/4, G3/8, G1/2, G3/4

Flow rate 2600 ... 7000 l/min.

Catalogue

Documentation

On-off valve MS12-EE MS12-EE-G-V24P-S Connection G1, G1 1/4, G1 1/2, G2

Flow rate 25000 ... 32000 l/min.

Catalogue

Documentation

Part number Type Name Links

527709 MS4-EE-1/4-10V24P-S On-off valve with silencer

527682 MS6-EE-1/2-10V24P-S On-off valve with silencer

535032 MS12-EE-G-V24P-S On-off valve with silencer

On-off valves, manual operated

Name Type Comment Picture Documentation

On-off valve MS4-EM MS4-EM1-1/4-S Connection G1/8, G1/4, G3/8

Flow rate 1200 ... 2200 l/min.

Catalogue

Documentation

On-off valve MS6-EM MS6-EM1-1/2-S Connection G1/4, G3/8, G1/2, G3/4

Flow rate 3000 ... 8700 l/min.

Catalogue

Documentation

On-off valve MS9-EM MS9-EM-G-S-VS Connection G1/2, G3/4, G1, G1 1/4, G1 1/2

Flow rate 8000 ... 18000 l/min

Catalogue

Documentation

On-off valve MS12-EM MS12-EM-G-S Connection G1, G1 1/4, G1 1/2, G2

Flow rate 25000 ... 32000 l/min.

Catalogue

Documentation

Page 32: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 32 from 76

Part number Type Name Links

541259 MS4-EM1-1/4-S On-off valve with silencer

541268 MS6-EM1-1/2-S On-off valve with silencer

562952 MS9-EM-G-S-VS On-off valve with silencer

535031 MS12-EM-G-S On-off valve with silencer

On-off valves, pneumatic operated

Name Type Comment Picture Documentation

On-off valve MS...-EP-… MS...-EP-… Connection G1/4, G1/2, G1

Part number Type Name Links

8028520 MS4-EE-1/4-EP-CS On-off valve Datasheet

3075309 MS6-EE-1/2-EP-CS On-off valve Datasheet

2677260 MS9-EE-G-EP-S-VS-CS On-off valve with silencer Datasheet

3.6.2 Pressure build-up valve

Name Type Comment Picture Documentation

Pressure build-up valve MS4-DL

MS4-DL-1/4 Connection G1/4

Flow rate 1000 ... 2000 l/min.

Catalogue

Documentation

Pressure build-up valve MS6-DL

MS6-... Port G1/4, G3/8, G1/2, G3/4

Flow rate 2800 ... 6450 l/min

Catalogue

Documentation

Pressure build-up valve MS12-DL

MS12-DL-G Connection G2

Flow rate 25000 ... 42000 l/min.

Catalogue

Documentation

Part number Type Name Links

529531 MS4-DL-1/4 Pressure build-up valve

529817 MS6-DL-1/2 Pressure build-up valve

541497 MS12-DL-G Pressure build-up valve

Page 33: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 33 from 76

3.6.3 Pressure build-up and venting valves

Name Type Comment Picture Documentation

Pressure build-up and venting valve MS6-SV

MS6-SV-1/2-C-10V24E-S Size 6

Connection G1/2

Pressure 3,5 - 10 bar

Flow rate 4300 l/min

Voltage 24 V DC

Electric operated

3/2-Directional control valve, Initial

position closed

Performance Level C, Cat-egory 1,

1-Canal by EN ISO 13849-1

Catalogue

Documentation

Pressure build-up and venting valve MS9-SV

MS9-SV-G-C-10V24P-S-VS

Size 9

Connection G1

Pressure 3,5 - 16 bar

Flow rate 16000 l/min

Voltage 24 V DC

Electric operated

3/2-Directional control valve, Initial

position closed

Performance Level C, Cat-egory 1,

1-Canal by EN ISO 13849-1

Catalogue

Documentation

Part number Type Name Links

609307 MS6-SV-1/2-C-10V24E-S Pressure build-up and venting valve with silencer

562176 MS9-SV-G-C-10V24P-S-VS Pressure build-up and venting valve with silencer

3.6.4 Branching module

Name Type Comment Picture Documentation

Branching module MS…-FRM-…

MS…-FRM-…

MS…-FRM-FRZ

Connection G1/4, G1/2, G1, G2

Flow rate 3200 ... 42000 l/min

Catalogue

Documentation

Page 34: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 34 from 76

Part number Type Name Links

529555 MS4-FRM-1/4 Branching module

529857 MS6-FRM-1/4 Branching module

529853 MS6-FRM-1/2 Branching module

564145 MS9-FRM-G-VS Branching module

541681 MS12-FRM-G Branching module

549336 MS4-FRM-FRZ Branching module, slim

549337 MS6-FRM-FRZ Branching module, slim

3.6.5 Filters and filter control valves

Name Type Comment Picture Documentation

Filter-regulating valve MS…-LFR

MS…-LFR-… Connection G1/4, G1/2, G1 and G2

Flow rate 850 ... 17000 l/min.

Filtration 5µm and 40µm

Catalogue

Documentation

Fine- and Micro filter MS…-LFM

MS…-LFM-… Connection G1/4, G1/2

Flow rate 380 … 550 l/min

Operating pressure 2 … 12 bar

Filtration 0,01 µm, 1 µm

Catalogue

Documentation

Activated carbon filter MS…-LFX

MS…-LFX-… Connection G1/4, G1/2

Flow rate 700 l/min.

Operating pressure 0 … 20 bar

Residual oil content <= 0,003 mg/m³

Catalogue

Documentation

Filter cartridges MS MS4-...

MS6-...

MS9-...

Size 4, 6, 9

Grade of filtration

- 40µm

- 5µm

- 1µm

- 0.01µm

- Activated carbon filter

Catalogue

Documentation

Page 35: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 35 from 76

Part number Type Name Links

526489 MS4-LFR-1/4-D7-E-R-M-A4-AS Filter-regulating valve, 40 µm

526490 MS6-LFR-1/2-D7-E-R-M-A4-AS Filter-regulating valve, 40 µm

562531 MS9-LFR-G-D7-E-U-M-A4-AS Filter-regulating valve, 40 µm

535022 MS12-LFR-G-D7-E-U-M-A4-LD-AS Filter-regulating valve, 40 µm

526489 MS4-LFR-1/4-D7-C-R-M-A4-AS Filter-regulating valve, 5 µm

526490 MS6-LFR-1/2-D7-C-R-M-A4-AS Filter-regulating valve, 5 µm

562531 MS9-LFR-G-D7-C-U-M-A4-AS Filter-regulating valve, 5 µm

535022 MS12-LFR-G-D7-C-U-M-A4-LD-AS Filter-regulating valve, 5 µm

529663 MS6-LFM-1/4-ARM Micro filter, 0,01 µm

529667 MS6-LFM-1/4-BRM Fine filter, 1 µm

529655 MS6-LFM-1/2-ARM Micro filter, 0,01 µm

529659 MS6-LFM-1/2-BRM Fine filter, 1 µm

529683 MS6-LFX-1/4-R Activated carbon filter

529679 MS6-LFX-1/2-R Activated carbon filter

534501 MS4-LFP-C Filter cartridge, 5 µm

534502 MS4-LFP-E Filter cartridge, 40 µm

532909 MS6-LFM-A Micro filter cartridge

532910 MS6-LFM-B Micro filter cartridge

534499 MS6-LFP-C Filter cartridge, 5 µm

534500 MS6-LFP-E Filter cartridge, 40 µm

532911 MS6-LFX Activated carbon filter cartridge

570309 MS9-LFP-C Filter cartridge, 5 µm

570310 MS9-LFP-E Filter cartridge, 40 µm

3.6.6 Oiler with fill level check

Name Type Comment Picture Documentation

Oiler with fill level check MS6-LOE-1/2-R-S-CS Connection G1/2

Part number Type Name Links

5300537 MS6-LOE-1/2-R-S-CS Oiler with fill level check Datasheet

Page 36: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 36 from 76

3.6.7 Pressure regulating valves

Name Type Comment Picture Documentation

Pressure regulating valve MS…-LR

MS…-LR-… Connection G1/4, G1/2, G1 und G2

Flow rate 1000 ... 26500 l/min

Catalogue

Documentation

Precision pressure regulat-ing valve MS6-LRP

MS6-LRP-1/4-D4-A8-AS Connection G1/4

Flow rate 1100 l/min

Pressure control range 0,05 … 2,5 bar

Catalogue

Documentation

Precision pressure regulat-ing valve LRP

LRP-… Connection G1/4

Flow rate 800 ... 2300 l/min

Pressure 0,05 ... 0,7 bar, 0,05 ... 2,5 bar, 0,05 ... 4 bar

Max. pressure hysteresis 0,02 bar

Without manometer

Catalogue

Documentation

Part number Type Name Links

527690 MS4-LR-1/4-D7-A4-AS Pressure regulating valve

527663 MS6-LR-1/2-D7-A4-AS Pressure regulating valve

562530 MS9-LR-1-D7-A4-AS Pressure regulating valve

535021 MS12-LR-G-D7-A4-LD-AS Pressure regulating valve

538028 MS6-LRP-1/4-D4-A8-AS Precision pressure regulating valve

159500 LRP-1/4-0,7 Precision pressure regulating valve

162834 LRP-1/4-2,5 Precision pressure regulating valve

159501 LRP-1/4-4 Precision pressure regulating valve

3.6.8 Pressure measuring devices – Pressure gauge

Name Type Comment Picture Documentation

Pressure gauge MA MA-...-RG Connection G1/8, G1/4

Pressure 0...2,5 bar, 0 … 10 bar, 0 … 16 bar

Indicating range bar

DIN EN 837-1

Adjustable red-green range

Catalogue

Documentation

Part number Type Name Links

525725 MA-40-10-R1/8-E-RG Pressure gauge

525726 MA-40-16-R1/8-E-RG Pressure gauge

546963 MA-40-2,5-R1/8-E-RG Pressure gauge

525728 MA-50-10-R1/4-E-RG Pressure gauge

525729 MA-50-16-R1/4-E-RG Pressure gauge

525727 MA-50-2,5-R1/4-E-RG Pressure gauge

719963 Red disc diameter 40 Disc with adjustable red segment

719962 Red disc diameter 50 Disc with adjustable red segment

Page 37: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 37 from 76

3.6.9 Pressure switch mechanical, only for service units

Name Type Comment Picture Documentation

Pressure switch PEV PEV-1/4-B-M12 Pressure 1 ... 12 bar

Voltage 24 V DC

Mechanical

Non-contacting

Adjustable switching point

Pressure view

Catalogue

Documentation

Part number Type Name Links

192488 PEV-1/4-B-M12 Pressure switch

3.6.10 Pressure amplifier

Name Type Comment Picture Documentation

Pressure booster DPA DPA-... Twin-piston

Pressure booster

Pneumatic actuator 1:2

Pneumatic Connection

G1/4, G3/8, G1/2

Supply pressure 2 ... 10 bar

Output pressure 4 ... 16 bar

Flow rate 300 ... 3000 Nl/min

Ambient temperature

+5 ... +60°C.

Catalogue

Documentation

Part number Type Name Links

549402 DPA-100-16-A Pressure booster

537274 DPA-40-16 Pressure booster

549400 DPA-63-16-A Pressure booster

Page 38: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 38 from 76

3.6.11 Standard service units according to VW Guideline

Service unit - Standard - G1/4“

Order number: 8043226 Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 1/4" MS4-AGB 526069

2 1 Module connector MS4-MV1 8119201

3 1 On-off valve with silencer 6842 U-1/4-B MS4-EM1-1/4-S 541259

4 1 Mounting bracket MS4-WP 532184

5 1 Filter regulator 40µm MS4-LFR-1/4-D7-E-R-M-A4-AS 526489

1 Filter cartridge 40 µm (replacement) MS4-LFP-E 534502

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS4-MV1 8119201

8 1 Branching module MS4-FRM-1/4 529555

9 2 Blanking plug B-1/4 3569

10 1 Module connector MS4-MV1 8119201

11 1 On-off valve electrical with silencer 6842 U-1/4-B MS4-EE-1/4-10V24P-S 527709

12 1 Module connector MS4-MV1 8119201

13 1 Soft-start valve MS4-DL-1/4 529531

14 1 Mounting bracket MS4-WP 532184

15 1 Branching module MS4-FRM-1/4 529555

16 2 Blanking plug B-1/4 3569

17 1 Module connector MS4-MV1 8119201

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G1/4 G1/4

1 1110

9

87

6

543

2

12 13 14 15

16

17

213

12

21

12

31 2

21

Page 39: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 39 from 76

Service unit - Standard - G1/2“

Order number: 8043221 Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 1/2" MS6-AGD 526082

2 1 Module connector MS6-MV1 8119204

3 1 On-off valve with silencer 6844 U-1/2-B MS6-EM1-1/2-S 541268

4 1 Mounting bracket MS6-WP 532195

5 1 Filter regulator 40µm MS6-LFR-1/2-D7-E-R-M-A4-AS 526490

1 Filter cartridge 40 µm (replacement) MS6-LFP-E 534500

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS6-MV1 8119204

8 1 Branching module MS6-FRM-1/2 529853

9 2 Blanking plug B-1/2 3571

10 1 Module connector MS6-MV1 8119204

11 1 Soft-start/quick exhaust valve with silencer 6845 U-3/4-B

MS6-SV-1/2-C-10V24E-S 609307

12 1 Mounting bracket MS6-WP 532195

13 1 Branching module MS6-FRM-1/2 529853

14 2 Blanking plug B-1/2 3571

15 1 Module connector MS6-MV1 8119204

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G1/2 G1/2

1 1110

9

87

6

543

2

12 13

14

15

213

12

21

31 2

Y1

R2

Page 40: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 40 from 76

Service unit - Standard - G1“

Order number: 8043222 Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 1" MS9-AGF 552956

2 1 Module connector MS9-MV 552950

3 1 On-off valve with silencer 151990 U-1-B MS9-EM-G-S-VS 562952

4 1 Mounting bracket MS9-WP 552947

5 1 Filter regulator 40µm MS9-LFR-G-D7-E-U-M-A4-AS 562531

1 Filter cartridge 40 µm (replacement) MS9-LFP-E 570310

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS9-MV 552950

8 1 Branching module MS9-FRM-G-VS 564145

9 2 Blanking plug B-1 5763

10 1 Module connector MS9-MV 552950

11 1 Soft-start/quick exhaust valve with silencer 151990 U-1-B

MS9-SV-G-C-10V24P-S-VS 562176

12 1 Mounting bracket MS9-WP 552947

13 1 Branching module MS9-FRM-G-VS 564145

14 2 Blanking plug B-1 5763

15 1 Module connector MS9-MV 552950

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G1 G1

1 1110

9

87

6

543

2

12 13

14

15

213

12

2

31

21

Page 41: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 41 from 76

Service unit - Standard - G2“

Order number: DE_CS.1449353-A Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 2" MS12-AGI 537138

2 1 Module connector MS12-MV 537134

3 1 On-off valve with silencer 151990 U-1-B MS12-EM-G-S 535031

4 1 Mounting bracket MS12-WP 537133

5 1 Filter regulator 40µm MS12-LFR-G-D7-E-U-M-A4-LD-AS 535022

1 Filter cartridge 40 µm (replacement) MS12-LFP-E 537144

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS12-MV 537134

8 1 Branching module MS12-FRM-G 541681

9 2 Blanking plug

10 1 Module connector MS12-MV 537134

11 1 On-off valve electrical with silencer 151990 U-1-B MS12-EE-G-V24P-S 535032

12 1 Module connector MS12-MV 537134

13 1 Soft-start valve MS12-DL-G 541497

14 1 Mounting bracket MS12-WP 537133

15 1 Branching module MS12-FRM-G 541681

16 2 Blanking plug

17 1 Module connector MS12-MV 537134

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G2 G2

1 1110

9

87

6

543

2

12 13 14 15

16

17

213

12

21

12

31 2

21

Page 42: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 42 from 76

Service unit – with electric valve for sealing air - G1/4“

Order number: 8043227 Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 1/4" MS4-AGB 526069

2 1 Module connector MS4-MV1 8119201

3 1 On-off valve with silencer 6842 U-1/4-B MS4-EM1-1/4-S 541259

4 1 Mounting bracket MS4-WP 532184

5 1 Filter regulator 40µm MS4-LFR-1/4-D7-E-R-M-A4-AS 526489

1 Filter cartridge 40 µm (replacement) MS4-LFP-E 534502

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS4-MV1 8119201

8 1 On-off valve electrical with silencer 6842 U-1/4-B MS4-EE-1/4-10V24P-S 527709

9 1 Module connector MS4-MV1 8119201

10 1 Branching module MS4-FRM-1/4 529555

11 2 Blanking plug B-1/4 3569

12 1 Module connector MS4-MV1 8119201

13 1 On-off valve electrical with silencer 6842 U-1/4-B MS4-EE-1/4-10V24P-S 527709

14 1 Module connector MS4-MV1 8119201

15 1 Soft-start valve MS4-DL-1/4 529531

16 1 Mounting bracket MS4-WP 532184

17 1 Branching module MS4-FRM-1/4 529555

18 2 Blanking plug B-1/4 3569

19 1 Module connector MS4-MV1 8119201

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G1/4 G1/4

1

11

10987

6

543

2

12 13 14 15

18

17

213

12

212

3

12

3

1

16 19

21

Page 43: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 43 from 76

Service unit - with electric valve for sealing air - G1/2“

Order number: 8043223 Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 1/2" MS6-AGD 526082

2 1 Module connector MS6-MV1 8119204

3 1 On-off valve with silencer 6844 U-1/2-B MS6-EM1-1/2-S 541268

4 1 Mounting bracket MS6-WP 532195

5 1 Filter regulator 40µm MS6-LFR-1/2-D7-E-R-M-A4-AS 526490

1 Filter cartridge 40 µm (replacement) MS6-LFP-E 534500

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS6-MV1 8119204

8 1 Soft-start/quick exhaust valve with silencer 6845 U-3/4-B

MS6-SV-1/2-C-10V24E-S 609307

9 1 Module connector MS6-MV1 8119204

10 1 Branching module MS6-FRM-1/2 529853

11 2 Blanking plug B-1/2 3571

12 1 Module connector MS6-MV1 8119204

13 1 Soft-start/quick exhaust valve with silencer 6845 U-3/4-B

MS6-SV-1/2-C-10V24E-S 609307

14 1 Mounting bracket MS6-WP 532195

15 1 Branching module MS6-FRM-1/2 529853

16 2 Blanking plug B-1/2 3571

17 1 Module connector MS6-MV1 8119204

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G1/2 G1/2

1

11

10987

6

543

2

12 13 14 15

16

17

213

12

21

31 2

Y1

R231 2

Y1

R3

Page 44: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 44 from 76

Service unit - with electric valve for sealing air - G1“

Order number: 8043224 Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 1" MS9-AGF 552956

2 1 Module connector MS9-MV 552950

3 1 On-off valve with silencer 151990 U-1-B MS9-EM-G-S-VS 562952

4 1 Mounting bracket MS9-WP 552947

5 1 Filter regulator 40µm MS9-LFR-G-D7-E-U-M-A4-AS 562531

1 Filter cartridge 40 µm (replacement) MS9-LFP-E 570310

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS9-MV 552950

8 1 Soft-start/quick exhaust valve with silencer 151990 U-1-B

MS9-SV-G-C-10V24P-S-VS 562176

9 1 Module connector MS9-MV 552950

10 1 Branching module MS9-FRM-G-VS 564145

11 2 Blanking plug B-1 5763

12 1 Module connector MS9-MV 552950

13 1 Soft-start/quick exhaust valve with silencer 151990 U-1-B

MS9-SV-G-C-10V24P-S-VS 562176

14 1 Mounting bracket MS9-WP 552947

15 1 Branching module MS9-FRM-G-VS 564145

16 2 Blanking plug B-1 5763

17 1 Module connector MS9-MV 552950

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G1 G1

1

11

10987

6

543

2

12 13 14 15

16

17

213

12

2

312

31

21

Page 45: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 45 from 76

Service unit - with pneumatic valve for sealing air - G1/4“

Order number: 8043228 Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 1/4" MS4-AGB 526069

2 1 Module connector MS4-MV1 8119201

3 1 On-off valve with silencer 6842 U-1/4-B MS4-EM1-1/4-S 541259

4 1 Mounting bracket MS4-WP 532184

5 1 Filter regulator 40µm MS4-LFR-1/4-D7-E-R-M-A4-AS 526489

1 Filter cartridge 40 µm (replacement) MS4-LFP-E 534502

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS4-MV1 8119201

8 1 On-off valve pneumatic MS4-EE-1/4-EP-CS 8028520

9 1 silencer U-1/4-B 6842

10 1 Module connector MS4-MV1 8119201

11 1 Branching module MS4-FRM-1/4 529555

12 2 Blanking plug B-1/4 3569

13 1 Module connector MS4-MV1 8119201

14 1 On-off valve electrical with silencer 6842 U-1/4-B MS4-EE-1/4-10V24P-S 527709

15 1 Module connector MS4-MV1 8119201

16 1 Soft-start valve MS4-DL-1/4 529531

17 1 Mounting bracket MS4-WP 532184

18 1 Branching module MS4-FRM-1/4 529555

19 2 Blanking plug B-1/4 3569

20 1 Module connector MS4-MV1 8119201

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G1/4 G1/4

1 1110

9

87

6

543

2 12

13 14 15 1817

213

12

212

3

1

16 20

31 2

12

19

21

Page 46: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 46 from 76

Service unit - with pneumatic valve for sealing air - G1/2“

Order number: 8043225 Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 1/2" MS6-AGD 526082

2 1 Module connector MS6-MV1 8119204

3 1 On-off valve with silencer 6844 U-1/2-B MS6-EM1-1/2-S 541268

4 1 Mounting bracket MS6-WP 532195

5 1 Filter regulator 40µm MS6-LFR-1/2-D7-E-R-M-A4-AS 526490

1 Filter cartridge 40 µm (replacement) MS6-LFP-E 534500

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS6-MV1 8119204

8 1 Branching module MS6-FRM-1/2 529853

9 2 Blanking plug B-1/2 3571

10 1 Module connector MS6-MV1 8119204

11 1 On-off valve pneumatic with silencer 6844 U-1/2-B MS6-EE-1/2-EP-CS 3075309

12 1 Module connector MS6-MV1 8119204

13 1 Branching module MS6-FRM-1/2 529853

14 2 Blanking plug B-1/2 3571

15 1 Module connector MS6-MV1 8119204

16 1 Soft-start/quick exhaust valve with silencer 6845 U-3/4-B

MS6-SV-1/2-C-10V24E-S 609307

17 1 Mounting bracket MS6-WP 532195

18 1 Branching module MS6-FRM-1/2 529853

19 2 Blanking plug B-1/2 3571

20 1 Module connector MS6-MV1 8119204

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G1/2 G1/2

1

14

1312117

6

543

2

15 16 17 18

19

20

213

12

31 2

12

2

2

11

10

9

8

21

31 2

Y1

R2

Page 47: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 47 from 76

Service unit - with pneumatic valve for sealing air - G1“

Order number: DE_CS.1449360-A Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Connecting plate 1" MS9-AGF 552956

2 1 Module connector MS9-MV 552950

3 1 On-off valve with silencer 151990 U-1-B MS9-EM-G-S-VS 562952

4 1 Mounting bracket MS9-WP 552947

5 1 Filter regulator 40µm MS9-LFR-G-D7-E-U-M-A4-AS 562531

1 Filter cartridge 40 µm (replacement) MS9-LFP-E 570310

6 1 Pressure gauge red/green MA-50-16-R1/4-E-RG 525729

7 1 Module connector MS9-MV 552950

8 1 Branching module MS9-FRM-G-VS 564145

9 2 Blanking plug B-1 5763

10 1 Module connector MS9-MV 552950

11 1 On-off valve pneumatic with silencer 151990 U-1-B MS9-EE-G-EP-S-VS-CS 2677260

12 1 Module connector MS9-MV 552950

13 1 Branching module MS9-FRM-G-VS 564145

14 2 Blanking plug B-1 5763

15 1 Module connector MS9-MV 552950

16 1 Soft-start/quick exhaust valve with silencer 151990 U-1-B MS9-SV-G-C-10V24P-S-VS 562176

17 1 Mounting bracket MS9-WP 552947

18 1 Branching module MS9-FRM-G-VS 564145

19 2 Blanking plug B-1 5763

20 1 Module connector MS9-MV 552950

A pressure monitoring via a pressure switch is provided at the service unit. For this purpose, a released elec-tronic pressure switch according to specification mechanics or a mechanical pressure switch must be ordered separately. Mechanical pressure switches see chapter 3.6.9.

2

2

11

2

2

11

G1 G1

1

14

1312117

6

543

2

15 16 17 18

19

20

213

12

31 2

12

2

31

2

2

11

10

9

8

21

Page 48: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 48 from 76

Service unit - sealing air - G1/4“

Order number: DE_CS.1431151-B Download Pneumatic Drawing

Structure:

Part list:

Pos. Piece Name Type Part number

1 1 Fine filter 1µm MS6-LFM-1/4-BRM 529667

2 1 Mounting bracket MS6-WP 532195

3 1 Micro filter 0,01µm MS6-LFM-1/4-ARM 529663

4 1 Module connector MS6-MV1 8119204

5 1 Activated carbon filter MS6-LFX-1/4-R 529683

6 1 Module connector MS6-MV1 8119204

7 1 Precision pressure regulator MS6-LRP-1/4-D4-A8-AS 538028

8 1 Pressure gauge red/green MA-40-2,5-R1/8-E-RG 546963

9 1 Mounting bracket MS6-WP 532195

10 1 Branching module MS6-FRM-1/4 529857

11 2 Blanking plug B-1/2 3571

12 1 Push-in fitting QS-G1/4-6-I 186108

Compressed air quality Output: 1.7.1 to DIN ISO8573-1 Nominal flowrate: ca. 380 l/ min Min. flow rate to comply with the air quality class: 135 l/ min

G1/4 G1/4

1 765432

8

9 10

11

12

1

Page 49: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 49 from 76

3.7 Safety oriented pneumatics

3.7.1 Safety oriented valves

Name Type Comment Picture Documentation

Standard valves VSVA with central plug

VSVA-... Flow rate 400 ... 1400 l/min Voltage 24 V DC Sub-base valve Solenoid actuated, piloted Sub-bases.

Catalogue

Documentation

Part number Type Name Links

534556 VSVA-B-M52-MH-A1-1R5L solenoid valve

Name Type Comment Picture Documentation

Standard valves VSVA with individual plug

VSVA-... Flow rate 400 ... 1400 l/min

Voltage 12, 24 V DC, 24, 110 or 230 V AC

Sub-base valve

Solenoid actuated, piloted

Sub-bases.

Catalogue

Documentation

Part number Type Name Links

560726 VSVA-B-M52-MZ-A1-1C1-APP solenoid valve

Name Type Comment Picture Documentation

Control blocks VOFA VOFA-... Soft-start valve

5/2-way valve with switch-ing position sensing, redun-dant

Flow rate 1100 l/min

Voltage: 24 V DC

Catalogue

Documentation

Part number Type Name Links

574011 VOFA-L26-T32C-M-G14-1C1-APP control block

569819 VOFA-L26-T52-M-G14-1C1-APP control block

Name Type Comment Picture Documentation

Stop valve VL

Part number Type Name Links

25025 VL-2-1/4-SA Stop valve Datasheet

Page 50: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 50 from 76

3.7.2 Safe components for air treatment

Name Type Comment Picture Documentation

MS6-SV MS6-...

For an extension to PLe, please consult with Festo.

Size 6

Connection G1/2, also available with NPT thread

Pressure 3.5 ... 10 bar

Flow rate 4300 l/min

Voltage 24 V DC

Actuation

solenoid actuated

Pressure gauge with bar, psi, MPa

3/2-way valve Normally closed

Silencer

Flow direction

- from left to right

- from right to left.

Catalogue

Documentation

Part number Type Name Links

548713 MS6-SV-1/2-D-10V24P-2M12-SO soft-start/quick exhaust valve

3.8 Pneumatic connection technology

3.8.1 Calibrated outside tubing

Name Type Comment Picture Documentation

Plastic tube PUN-H PUN-H-… Diameter 4 ... 12 mm

Calibrated outside

Operating medium: Com-pressed air

Material Polyurethane

High resistance to mi-crobes and hydrolysis

Colour: nature

Catalogue

Documentation

Plastic tube PAN PAN-...-NT Diameter 4 … 12 mm

Calibrated outside

Operating medium: Com-pressed air

Material Polyamide

Colour: nature

Catalogue

Documentation

Page 51: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 51 from 76

Part number Type Name Links

197383 PUN-H-4X0,75-BL Plastic tube

197384 PUN-H-6X1-BL Plastic tube

197385 PUN-H-8X1,25-BL Plastic tube

197386 PUN-H-10X1,5-BL Plastic tube

197387 PUN-H-12X2-BL Plastic tube

197376 PUN-H-4X0,75-NT Plastic tube

197377 PUN-H-6X1-NT Plastic tube

197378 PUN-H-8X1,25-NT Plastic tube

197379 PUN-H-10X1,5-NT Plastic tube

197380 PUN-H-12X2-NT Plastic tube

546284 PAN-4X0,75-NT Plastic tube

546285 PAN-6X1-NT Plastic tube

546286 PAN-8X1,25-NT Plastic tube

546287 PAN-10X1,5-NT Plastic tube

546288 PAN-12X1,75-NT Plastic tube

3.8.2 Push in fittings

Name Type Comment Picture Documentation

Push in fitting NPQH, metal NPQH-... Connection M5, M7, G 1/8, G 1/4,

G 3/8, G 1/2

Diameter 4, 6, 8, 10, 12, 14 mm

Thread connection

- G-Thread with sealing ring

Appropriate for Vacuum

Push-in fittings

Push-in connectors

Schott-Push-in connectors

Push-in connectors with Push-in sleeves

Schott-Push-in fittings.

Catalogue

Documentation

Push in fitting QS, standard series

QS-…-G…

QSM-...

Preferred range!

Connection M5, M7, G1/8, G1/4, G1/2, G3/8

Diameter 4, 6, 8, 10, 12 mm

Threat connection

- G-Threat with Sealing ring

Appropriate for Vacuum

Push-in fittings

Push-in connectors

Schott-Push-in connectors

Push-in connectors with Push-in sleeves

Multiple distributor

Schott-Push-in fittings.

Catalogue

Documentation

Page 52: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 52 from 76

3.9 Other pneumatic equipment

3.9.1 Energy efficient air blowing applications

Name Type Comment Picture Documentation

Pulse oscillators VLG VLG-... Connection G1/8, G 1/4

Flow rate 120 to 600 l/min

Frequency 0.5 to 50 Hz

Catalogue

Documentation

Connection example

Part number Type Name Links

4026 VLG-4-1/4 pulse generator

4025 VLG-4-1/8 pulse generator

3.9.2 Pneumatic timer

Name Type Comment Picture Documentation

Pneumatic timer PZVT PZVT-99999-MIN-B Connection M5

Flow rate 50 l/min

Delay time

0,2 ... 3 s

2 ... 30 s

8 ... 120 s

20 ... 300 s.

Catalogue

Documentation

Part number Type Name Links

13989 PZVT-99999-MIN-B Pneumatic timer

3.9.3 Time delay valve

Name Type Comment Picture Documentation

Time delay valve VZB VZB-3-1/4 Flow rate 600 l/min

Connection G1/4.

Catalogue

Documentation

Part number Type Name Links

3488 VZB-3-1/4 Time delay valve

Page 53: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 53 from 76

3.9.4 After blow module

Name Type Comment Picture Documentation

After blow module VSVA-B-TR1-B52-ZD-D1-1R5L-CS

PR237699 – 572422

PR207486 – 540123

Operating pressure 3 to 6 bar

Voltage 24 VDC

Valve size ISO 1

and ISO 01

Connection 1/4

Part number Type Name Links

8037117 VSVA-B-TR1-B52-ZD-D1-1R5L-CS Solenoid valve with timer function Datasheet

572422 Control block After blow module PR237699 After blow module with valve ISO 01 Datasheet

540123 Control block After blow module PR207486 After blow module with valve ISO 1 Datasheet

3.9.5 Solenoid valve with pulse function

Name Type Comment Picture Documentation

Solenoid valve with pulse function VSVA

VSVA-B-T32C-…

At these valves, the cover cap needs to be used to re-alize a non-detenting man-ual override (see below).

Connection ISO1 (42 mm), internal or external pilot-air, central plug M12x1, 24 VDC, operating pressure 3 bis 10 bar,

Documentation

Part number Type Name Links

8109239 VSVA-B-T32C-AZD-D1-1R5L-CS-2130505A Solenoid valve with pulse function, external pilot air

8149181 VSVA-B-T32C-AD-D1-1R5L-CS-1668361A Solenoid valve with pulse function, internal pilot air

541010 VAMC-S6-CH Cover cap for manual override, non-detenting

(Packing unit: 1 pc. = package with 10 pc.)

3.9.6 Silencer

Name Type Comment Picture Documentation

Silencer U U-...-B Thread G1/2, G1/4, G1/8, G3/8, G3/4, G1

Material: Die-cast metal

Catalogue

Documentation

Silencer UO UO-... Port thread G1/8, G1/4

Special silencer with open-ing for VN vacuum genera-tor

Catalogue

Documentation

Part number Type Name Links

6844 U-1/2-B Silencer

6842 U-1/4-B Silencer

6841 U-1/8-B Silencer

151990 U-1-B Silencer

6845 U-3/4-B Silencer

6843 U-3/8-B Silencer

197584 UO-1/4 silencer

197583 UO-1/8 silencer

Page 54: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 54 from 76

4 Guideline CPX/MPA valve terminals

4.1 Structure of a CPX/MPA-valve terminal of release list

Example for the structure of a CPX/MPA-valve

Electric part Pneumatic part

Max. permissible expansion: ---> up to the system limit max. 12 valve positions

3 x 8 Inputs 8 valves, size MPA2

(Chosen: equipment JJJJEMJJ)

Bus node Supply & mounted exhaust air

with system supply

End plate, left Pneumatics-interface End plate, right

To ensure sufficient ventilation performance, it is recommended after every third interlinking block to set an additional supply U.

Order code of the drafted valve terminal MPA-FB-VI

Order number: 530411

Electric part of the valve terminal:

Order code 1: 50E-F43GCQPDGWDGWDGW-D+GSU

Pneumatic part of the valve terminal:

Order code 2: 32P-VCD-N-MBHBHBHBHU-4JEMSJJ+4T

Page 55: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 55 from 76

Description of the order code for the drafted example

Code Function

50E CPX-modular electrics terminal

F43 Electrics module, place 0, fieldbus node for PROFINET IO, 2x M12, metal

GC without node specific connection technology

QP Power supply place 0, interlinking block with system supply, 7/8“, 5-pole

D Electrics module place 1 to 3, input module 8 digital inputs 0,5 A with channel diagnostics

GW Connection technology place 1 to 3, manifold block 4xM12, 5-pole, double occupied, metal thread

D CPX-pneumatics-interface to MPA

1GS 1 piece, socket straight, 7/8“, 5-pole for operating voltage

U 1 piece, supplement mounting for wall mounting

32P Valve terminal type 32, MPA, pneumatic part

V Pneumatic supply of the valve, internal pilot air, mounted exhaust air

C Pneumatic main air connection G1/8

D Pneumatic connection G1/4

N Manual override, non-detenting

M Interlinking block 0, pneumatics-interface for MPA

B Interlinking block 1 to 4, connection plate for size 2

H Electric module, block 1 to 4, galvanic separated

U Supply plate block 4, pneumatics supply

J Valve position 0 to 3, 5/2-way, double pilot valves

E Valve position 4, 5/3-way valve, neutral position exhausted

MS Valve position 5, 5/2-way valve, monostable, mechanical spring return

J Valve position 6 and 7, 5/2-way, double pilot valve

4T 4 pieces, inscription label holder (T) for manifold block, transparent

Page 56: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 56 from 76

4.2 Structure of the electric modules

a) Bus node Profibus DP

b) Input module

c) Connection of the sensors

Interlinking block with system supply

Bus node

Electric (2) and connection block (1) are one unit.

On solving 4 fixing bolts the complete unit from the interlinking block can be lifted.

1

2

1

2

4

Interlinking block (without supply)

Input module, 8 inputs

Connection block, 4 x M12x2, 5-pole

After solving of 4 fixing bolts the connection block (4) including the clinging cables can be taken off.

Afterwards the input module (5) from the con-nection block (3) can be lifted out.

3

5

3

4

5

5

7

6

8

5

6

7

Connection block 4x M12x2, 5-pole

Plug M12, 4-pole

Plug M12, 5-pole, pre-assembled with cable

Pre-assembled connection cable plug M12, 5-pole to 2 x socket M12, 3-pole

8

Page 57: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 57 from 76

4.3 Connection of interlinking blocks

Interlinking block with system supply (power supply)

Interlinking block, conducting

Page 58: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 58 from 76

4.4 Valve functions

Circuit symbol Code Description

MS

5/2-way valve, monostable

- Reset via mechanical spring

J

5/2-way valve, bistable

B

5/3-way valve

- Neutral position pressurized - Reset via mechanic spring

E 1)

5/3-way valve

- Neutral position exhausted - Reset via mechanic spring

KS

2x3/2 closed monostable

- Reset via mechanical spring

-

L

Cover plate for valve position

1) With the slow pressure construction, the connected cylinder is not ventilated. To prevent abrupt delivering of the impulse, a suitable measure must be taken.

Page 59: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 59 from 76

4.5 Pneumatics-Interface / Compressed air supply, Pilot air supply for MPA

Symbol Code Description

Pneumatics

Interface

Supply plate

V

Internal pilot air supply, ducted exhaust air

• Pilot air supply is branched internally from port 1 in the pneumatic interface

• Exhaust port 3/5: connection to pneumatic interface and supply plate

• Pilot exhaust port 82/84: connection to supply plate only

• For operating pressure in the range 3 … 8 bar

X

External pilot air supply, ducted exhaust air

• Pilot air supply (3 … 8 bar) is connected at port 12/14

• Exhaust port 3/5: connection to pneumatic interface and supply plate

• Pilot exhaust port 82/84: connection to supply plate only

• For operating pressure in the range –0.9 … 10 bar (suitable for vacuum)

M Used together with compressed air supply V, X

The pilot exhaust air must be vented at least at one supply plate when using V or X. In the case of multiple supply plates, the port 82/84 is open on the last supply plate ex-works

Exhaust air plate with push-in connector 10 mm

U Supply plate for mounted exhaust air

Page 60: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 60 from 76

4.6 Control air switching valve and pressure switch

Remarks:

• VW-Specification: After the control air switching valve, there must always be a cover plate.

• The connections of the second valve must always be provided with blind plugs.

• The control air switching valve does not count when calculating the valves.

• Please contact Festo for the configuration of the valve terminal.

• When using the control air switching valve, external pilot air supply (code X) must always be selected for the pneumatic supply.

• This pneumatic interface may only be used in combination with the pilot air switching valve.

Page 61: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 61 from 76

4.7 Connecting plates / Electrical module for Fieldbus MPA1 and MPA2

For MPA1

Symbol Code Number of

valve posi-

tions

Description

A 4

Connection sizes:

M7

H 4

The electronic module contains the serial communica-tion and allows:

- transfer of the switching information - control the solenoid coil - separated power supply - place referenced diagnose - transfer of status-, parameter- and diagnos-

tics data - galvanic separated

For MPA2

Symbol Code Number of

valve posi-

tions

Description

B 2

Connection sizes:

G1/8

H 2

The electronic module contains the serial communica-tion and allows:

- transfer of the switching information - control the solenoid coil - separated power supply - place referenced diagnose - transfer of status-, parameter- and diagnos-

tics data - galvanic separated

Page 62: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 62 from 76

4.8 Constructive structure of the pneumatics part of the valve terminal

The connection blocks are connected by 3 screws with each other.

Every connecting plate has 2 valve positions.

The valves are fixed with 2 screws on the metallic connecting plates.

The compressed air supply and exhaust take place at the pneumatics interface and the supply plate before the right end plate. With big air pressure need other supply plates can be arranged between the cover plates.

Page 63: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 63 from 76

4.9 Note for creation of pressure zones

Pressure zone 1 Pressure zone 2 Pressure zone 3

The compressed air supply (1) subserves at the pneumatics-interface the valves 0 to 3. At the same time the pilot valves are also supplied inside with pilot air. The working pressure must amount 3 to 8 bar.

On the left before the supply plate is inserting a separating seal (T). This separating seal separates only the channel 1 of the pressure zone 1. The compressed air supply (2) in the supply plate provides the valves 4 and 5 with air pressure. Operating pressure to 8 bar.

The separator plate (T) after connecting plate 3 separates the channel 1 of the pressure zone 2. The valve positions 6 to 9 will provided above the supply plate before the end plate "on the right" with air pressure (3). Operating pressure to 8 bar.

The separating seals are marked to the simple differentiation as follows:

Separating seal, without channel separation separating seal, channel 1 separated

This marking of the separating seals is visible with mounted connecting plates.

Page 64: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 64 from 76

5 Data sheets

Page 65: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 65 from 76

Page 66: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 66 from 76

Page 67: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 67 from 76

Page 68: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 68 from 76

Page 69: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 69 from 76

Page 70: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 70 from 76

Connection example for pulse generator VLG

Page 71: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 71 from 76

Page 72: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 72 from 76

Page 73: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 73 from 76

Page 74: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 74 from 76

Page 75: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 75 from 76

Page 76: Operating Material - Release list Mechanics

Festo_ReleaseList_VW_Components_Mechanik_20220101_EN.docx

Version 2.4 / 01.01.2022 KSU-Class 6.1 Page 76 from 76


Recommended