INTERNATIONAL MACHIINE CONCEPTS
Page 1 of 20
Operation Instruction Manual
IMCLM-ST
Vertical Round Bottle Labeling Machine
INTERNATIONAL MACHIINE CONCEPTS
Page 2 of 20
CONTENT 1 Introduction ....................................................................................................... 5
1.1System component ........................................................................................ 5
1.2 System parameter: ....................................................................................... 5
1.3 Human-computer interface: ....................................................................... 5
1.3.1 Human-computer interface ................................................................... 5
1.3.2 Operation system start: .......................................................................... 6
1.3.3 Boot screen: ........................................................................................... 7
1.3.4 Operation running interface: ................................................................ 7
1.3.5 Parameter set interface: ........................................................................ 8
2 Overview ............................................................................................................. 9
3 Principle and Structure ................................................................................... 10
3.1 .1Outline .................................................................................................... 10
3.1 .2 Principle ................................................................................................. 10
3.1 .3 Structur .................................................................................................. 10
INTERNATIONAL MACHIINE CONCEPTS
Page 3 of 20
3.2 Main components ...................................................................................... 11
3.3 Parameter ................................................................................................... 12
4 Operation procedure and adjustment ............................................................. 12
4.1 Procedure flow ........................................................................................... 12
4.2 Check the sensor is well. ........................................................................... 13
4.3 Adjustment of the labeling machine ......................................................... 13
4.4 Stripper parallelism adjustment ................................................................ 13
4.5 Adjustment of bottle space and correct device ......................................... 15
5 Attentions ......................................................................................................... 15
6 Common faults analyses ................................................................................. 16
7 Maintenance .................................................................................................... 17
8 Appendix .......................................................................................................... 17
8.1 Optical fiber sensor specification (See appendix 1) ............................... 17
8.2Sketch map chart (See appendix 2) ........................................................... 17
8.3 Electrical principle chart (See appendix 3) .............................................. 17
9 Packaging lists and After-sale service ............................................................ 18
INTERNATIONAL MACHIINE CONCEPTS
Page 4 of 20
9.1 packaging list ............................................................................................. 18
9.2 Product certificate ..................................................................................... 19
9.3 Warranty Card ........................................................................................... 19
9.3.1 From date of sale, the warranty as follow: ......................................... 19
9.3.2 Check the machine model and machine no. ...................................... 20
9.3.3 Safe-keeping the invoice and warranty card ...................................... 20
INTERNATIONAL MACHIINE CONCEPTS
Page 5 of 20
1 Introduction
This machine adopts DELTA-DVP14SS11T2 (Delta) as the core control part for good
working: reasonable electrical design and human-computer software design, providing
high performance and easy operation.
1.1System component:
Human-computer interface
Programmable Logic Controller (PLC): DELTA-DVP14SS11T2 (Delta)
Optical fiber sensors: Keyence (Japan)
1.2 System parameter:
Environment: Temperature 5℃-50℃ Humidity 20%-90%
Power supply: Input AC 220V±10% (50Hz) Output DC 24V±2V
PLC: Input AC 220V 8 Transistors Output DC no contact 6 Transistors
1.3 Human-computer interface:
1.3.1 Human-computer interface: 5.7"FSTNLCD Touch screen
INTERNATIONAL MACHIINE CONCEPTS
Page 6 of 20
1.3.2 Operation system start:
Step1 Link the machine to power supply 220V.
Step2 Put the Emergency Stop Button in the normal position. (When the machine is
INTERNATIONAL MACHIINE CONCEPTS
Page 7 of 20
out of work, it can cut off the power immediately by pressing this button.)
Step3 The machine will enter into [Boot Screen] 2 s latter.
1.3.3 Boot screen:
1.3.4 Operation running interface:
Entering this interface, you can process as follows:
[ON]: Pressing [ON], machine will start to label; pressing [OFF],
machine stops working.
[Front label test]: Pressing [Front label test], the machine enters testing state.
Each pressing, each label feeds. The feeding label quantities
do not count.
[Back label test]: The same as [Front label test]. Pressing [Back label test],
the machine enters testing state. Each pressing, each label
INTERNATIONAL MACHIINE CONCEPTS
Page 8 of 20
feeds. The feeding label quantities do not count.
[Clear]: Pressing this button, the total production will be “zero” and
start a new count.
[Language set]: Switching the language: English and Chinese.
[Parameter set]: By pressing, enter into parameter set interface.
1.3.5 Parameter set interface:
[Parameter group]: This group can store a number of parameter setting data,
convenient for changes of different size bottles and labels. You can call
out the parameter setting data directly from the database without resetting,
which will save a lot of time and improve work efficiency.
[Protection impulse]: This is for the protection of the stepper motor, with setting of
200-1000P.
[Back label frequency]: You can set the labeling speed. The unit is Hz. The setting is
INTERNATIONAL MACHIINE CONCEPTS
Page 9 of 20
decided by bottle diameter, label length and the labeling speed you want.
Usually, the bigger the bottle is and the longer the label is, the slower the
labeling speed is. On the contrary, the labeling speed will be quick. If not,
the machine will can not normal working.
[Front label frequency]: The same as [Back label frequency].
[Front label OFF]: The front labeling head will not work if shut this. The back
labeling head will continue working for single face labeling.
[Back label OFF]: The same as [Front label OFF].
[Coding delay]: This can set the coding signal connection time, with adjustment of
coding depth and coding time to suit for different type printers. The unit
is second.
[Conveyor OFF]: This can start and stop the conveyor motor to offer time for the
operation people to deal with the bottles on the conveyor. Pressing, the
conveyor will stop moving.
[Coding OFF]: When the machine is working, you can choose starting the printer or
closing the printer. If do not need the printer or stop the printer for a
moment, pressing this button.
[Inverter frequency]: This is to control the speed of the conveyor.
2 Overview
LM-ST labeling machine is made to achieve the goal of the rationalization of production
design. The whole labeling process is automatic, with easy operation, high speed and nice
surface. This labeling machine is mainly applied in food, beverage, pharmaceutical,
cosmetic, chemical industry for flat and square bottle single face or two faces labeling.
INTERNATIONAL MACHIINE CONCEPTS
Page 10 of 20
3 Principle and Structure
3.1.1 Outline
LM-ST Vertical Round Bottle Labeling machine in order to achieve the rationalization of
production targets. Labeling process is automated operations, simple operation, fast
production, labeling position unified, beautiful, neat; applicable to the pharmaceutical,
chemical and food industry round container labeling
3.1.2 Principle
The working principle and structural characteristics of different packing objects into the
labeling conveyor belt conveyor belt driven by the bottle into the sub-bottle area, conveyor
continuous movement detected by the visual optical fiber into the bottle, the optical signal
transmission to the PLC, to deal with after the output signal from the PLC input to the
stepper motor, marked out by the stepper motor, through the rolling bodies label on the child,
labeling objects into the next process or container labeling machine conveyor belt.
3.1.3 Structure
Host stepper motor driver, Delta (Taiwan) PLC control system, the Kunlun Winton touch
interface, Pacific Keyence fiber (Japan) devices, and other imported parts, bringing together
a number of leading-edge technology, making the products of the industry with technical
advantages one. Microcomputer automatic control, friendly touch screen interface
man-machine interface, compact mechanical structure, simple operation, powerful; the label
set on the amount counted under the control of printing,
labeling and control off the marked lack of standard, non-ribbon automatic detection and
alarm functions of the unusual circumstances; random capacity display and label the number
of management; label tension adjustment; label length and gap Zhu; host height and front
and rear position adjustment; optional Tape printer; labeling and label detection phototube
INTERNATIONAL MACHIINE CONCEPTS
Page 11 of 20
sensitivity adjustment. The machine quality T6 aluminum alloy and SUS304 stainless steel,
excellent workmanship, compliance with GMP standards. LM-ST vertical sticker labeling
machine is a very good value for money products.
3.2 Main components
Commodity Function Remarks
Cabinet Support the above parts and protect the Electrical components
Conveyor Transporting the bottles Chain conveyor/Belt conveyor/Roller conveyor
Labeling head Unreeling pine Label tray
Feeding-label Driving label moving Steeper motor
Label stripper Strip the label from the back paper
Bottle-space
device
Keeping the bottle certain distance from each other
Bottle-space
Label-pressing
device
Making label smooth on the bottle Brush and sponge wheel
Adjust frame Adjusting all the parts suitable
Electric control Control the whole system
ribbon printing
machine / inkjet
printer
Printing and coding Optional
INTERNATIONAL MACHIINE CONCEPTS
Page 12 of 20
3.3 Parameter
Voltage specification: AC220V; 50/60Hz
Power: 500W
Production capacity: 30 to 150 bottles / min (depending on label size)
Labeling accuracy: ± 1mm (as the bottle YUANZHEN degree, verticality may be)
Print batch number: Electric coders
Applicable product range: outside diameter: !20 ~ ~~ 100 Height: 30 to 200
Applicable labels: Height: 15 ~ 150 Length: 20 to 300
The largest supply of labels: diameter: 300mm reel inside diameter: 76mm
Weight: 200kg
4 Operation procedure and adjustment
4.1 Procedure flow
Step1 Fix the label roll and adjust the height.
Step2 Adjusting the height of the bottle-bar, top-pressing device, bottle space and
correct device
Step3 Turn on the power and photoelectric switch; for printing, it need preheat about
15min.
Step4 Turn on the motors and sensor switch, testing labeling.
Step5 Ensuring no fault, production begins.
Step6 Turn off the machine.
INTERNATIONAL MACHIINE CONCEPTS
Page 13 of 20
4.2 Check the sensor is well.
See appendix 1 (Optical fiber sensor specification)
4.3 Adjustment of the labeling machine
Loosen the upper and lower fix braces---Change the height of machine by rotating the
handwheel---Interlock the braces.
4.4 Stripper parallelism adjustment
The aim: to make the stripper and sponge wheel and the conveyor parallel and at the
same level.
INTERNATIONAL MACHIINE CONCEPTS
Page 14 of 20
a. Stripper downward-sloping
Loosen upper and lower braces---lock the lower brace to make stripper parallel to the
bottle---lock the upper brace.
b. Stripper upward-sloping
Loosen upper and lower braces---lock the upper brace to make stripper parallel to the
bottle---lock the down brace.
INTERNATIONAL MACHIINE CONCEPTS
Page 15 of 20
4.5 Adjustment of wrap unit
5 Attentions
a. The power is AC220V. Ensure to use ground wire. Before start the machine, be sure
good installation.
b. There are two directions of the labeling machine: from left to right and from right to left.
c. Make sure the guide rings below the guide wheel at the same level. The upper guide ring
sits besides the label.
d. Make sure the position of the sensor, otherwise it will wrinkle when labeling.
e. Make sure the correct label passing patch.
INTERNATIONAL MACHIINE CONCEPTS
Page 16 of 20
6 Common faults analyses
Faults Reasons Solutions
a. Label
broken
Over-pressure of Synchronous
belt drives pulleys Loosen the regulating nut
Stuck of Synchronous belt drives pulley Add a pad on the Synchronous belt
drives pulleys
Label brakes too much Loosen brake
Label over-pressure Loosen the clamping screw
Printer over-pressure Adjust the printer
Wearing of label bottom Change the label or adjust guide rail
Stripper out of position Adjusting
b. Nolabel
feeding
Check the sensor Adjusting the sensor sensitivity
Broken of fiber amplifier Change new one
c. Label
wrinkle
Hard brush Change soft one
Label too quick Let speed slow
Bottle too irregular Change bottles
c. Label
inclined
Label not at the same level Adjust the label disk
Too quicker speed Slower
Labeling head inclined Adjust it
INTERNATIONAL MACHIINE CONCEPTS
Page 17 of 20
7 Maintenance
a. Ensure good connection with the ground wire and install anti-creeping protection
switch.
b. For the human-computer interface, no sharp touch and alcohol washing. When dusty,
wipe with cotton.
c. When the PLC is electrified, do not change the switches and connectors to avoid
damaging the electric control parts.
d. If the machine is long time no using, unplug the power plug.
8 Appendix
8.1 Optical fiber sensor specification (See appendix 1)
8.2Sketch map chart (See appendix 2)
The following is Label stretching chart.
INTERNATIONAL MACHIINE CONCEPTS
Page 18 of 20
8.3 Electrical principle chart (See appendix 3)
9 Packaging lists and After-sale service
9.1 packaging list
LM-ST Vertical Round Bottle Labeling Machine Package Lists
Machine No:
Num Commodity Specification Qty Remarks
1 Labeling machine LM-ST 1 set
2 Synchronous belt Sanxing 2 pieces
3 Screw driver Cross 1Piece
4 Screw driver Straight 1piece
5 Socket head wrench 1 set
6 adjustable spanner 1 piece
7 A character 1box
8 Coding machine HP-241 1set
9 Forceps 1piece
All above parts are packing.
Packing test:
Packing date:
INTERNATIONAL MACHIINE CONCEPTS
Page 19 of 20
9.2 Product certificate
Product certificate Machine is permitted
to leave factory after strict inspection.
Machine commodity
Model
Factory number
Inspector
Date
9.3 Warranty Card
Warranty Card
9.3.1 From date of sale, the warranty as follow:
a. User must strictly follow the instruction manual to operate.
b. The warranty period, users do not follow the instructions for correct operation, use,
maintenance, maintenance or damage caused by unauthorized replaceable parts. It
is within the scope of the warranty. But the company will still repair at a cost by the
users themselves
c. Warranty period: one year warranty for mechanical parts; half a year for electrical
parts.
INTERNATIONAL MACHIINE CONCEPTS
Page 20 of 20
9.3.2 Check the machine model and machine no.
After purchase, users please check the model and machine no with the invoice and
warranty card. If unity, please contact us for correction.
9.3.3 Safe-keeping the invoice and warranty card
After purchase, users please keep the invoice and warranty card carefully. No
alteration and no re-supply if loss. When repaired, please present invoice and
warranty card.
Customer’s
company
Address
Tel Fax
Pc Contacted person
Company name
Machine model Machine No
purchase date Invoice No
Note: warranty must be stamped by machine’s company.