39
Operation Manual www.universal-space.com
Operation Manual
www.universal-space.com
1
CONTENT
Important Safety Instructions ........................................................................ 1
1.Specifications ............................................................................................ 4
2.Package Contents ..................................................................................... 5
3. Part name ................................................................................................. 6
4.Set Up & Installation ................................................................................. 7
5. How to play ............................................................................................. 11
6. Game Option .......................................................................................... 12
7. Maintenance and Inspection ................................................................. 17
8. Overall Construction ............................................................................... 21
2
This manual contains valuable information about how to operate and maintain your game machine properly and safely. It is intended for the owner and/or personnel in charge of product operation. Carefully read and understand the instructions. If you need any help during installation and setup please utilize this manual and troubleshooting guide. If the product fails to function properly, non-technical personnel should under no circumstance attempt to service the machine. Contact your distributor or manufacturer for help. Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS To ensure the safe usage of this product, carefully read and understand these instructions before operating your game. Save these instructions for future reference. Use this product only as described in this manual. Other uses not recommended may cause fire, electric shock or personal injury. Unplug the game from the outlet when not in use, when moving from one location to another, and before cleaning/servicing. Explanations which require special attention are indicated by signs of warning. Depending on the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used. NOTE: A NOTE indicates useful hints or information about product usage. NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem. WARNING: A WARNING indicates a potential for product damage or serious personal Injury. It is important to understand the meaning of the following HAZARD SIGNS before continuing:
High Voltage and Shock Hazard: High voltage can cause electric shock. Turn off/unplug power before servicing. High Temperature Hazard: This part may cause scalding. Do not touch. Surface may be hot.
Thank you for purchasing FUNNY HAMSTER from UNIVERSAL SPACE. We hope
you enjoy the product.
3
No Touching Hazard: This part may be hot or can cause electric shock. Do not touch. Use the following safety guidelines to help ensure your own personal safety and to help protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures
Note: The contents of this manual may be updated without notice.
WARNING
Non-technical personnel who do not have technical knowledge and Expertise should refrain from performing such work that this manual require or perform tasks which are not explained in this manual. Failing to comply can cause severe accidents such as electric shock or other serious injuries. WARNING: To reduce the risk of fire, electric shock or personal injury, unplug or disconnect the machine from the power supply before servicing.
4
1. SPECIFICATIONS
Rated power supply： AC110V 50/60Hz
Power consumption： Min power consumption：176W
Max. Power consumption： 200W
Dimensions： W675.8×D867.7×H1797.5（mm）
Weight： ~77kg
NOTICE: After turning off the game, please wait at least 1 minute before
restarting again.
Note: Game parameters are subject to change without notice.
5
2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
1 x Body Assembly
Following accessories
No. Part No. Name Spec. Qty. Illustration Note
1 F113-804-000 Power cord 10A/110V 1.5m 1 Specs
depends on areas
2 F113-429-000 Fuse T6A/125V Φ5-20
1 Specs
depends on areas
3 F113-723-000 Manual ENGLISH 1
4 F113-404-000 Key C582 2
If any items are found to be missing, please contact your sales representative for
help immediately.
NOTE: Part models are subject to change without notice.
6
3. PART NAMES
FRONT VIEW
REAR VIEW
7
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid Place the unit on a dry level surface Ventilation openings in the back of the unit must not be obstructed by objects or by wall. 4.1 Play Zone This machine requires space for playing and for maintenance as shown below. Leave space around the game upon installation:
Service area： at least 30cm Play area： 100cm
8
4.2 Level Adjustment Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the game. If the game is installed on an unsuitable floor, it could cause a malfunction. To fix the game, adjust the Leveler down until it touches the floor, lifting the casters off the ground by 5mm. Repeat the same for all levelers.
Make sure the machine is level with the ground and all the
adjustable legs should stick to the floor closely.
NOTICE
Leveler Caster
About 5mm
Move Fix
9
4.3 Transporting the Game If you need to move the game, adjust the levelers back to an “up” position so the casters touch the ground. For short distance transport, tilt the machine backwards slightly (about 30 degrees off the ground), using the casters push the machine frontward. (See diagram below)
NOTICE
Be careful not to damage the machine during transport.
The machine should be handled with care when bringing it down from a higher level.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages
4.4 Connecting Power
10
WARNING: Check the voltage rating before you connect the equipment to an electrical outlet to ensure that the required voltage and frequency match the available power source. Please refer the label of the machine.
Do not plug the equipment power cables into an electrical outlet if the power cable is damaged.
Avoid putting many loads on one electrical outlet as it could generate heat and fire resulting from overload.
Connect the grounding conductor to the earth terminal (GND):
WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does
not sit on the power cord as this could damage the cord and become hazardous.
To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord.
To prevent electric shock, do not touch the power plug when hand is wet.
Ensure that nothing rests on the power cord and that it is not located where it can be stepped on or tripped over.
11
5. HOW TO PLAY
Catch the Hamsters!
Funny Hamster is a video redemption game featuring a group of hungry hamsters that are out to eat your food! You must try to catch them when they least expect it! Different hamsters have different appetites and eat at different pace, so you have to time the catch carefully and activate the trap at the right moment!
Insert coin(s). 1 cake per coin up to a maximum of 5 cakes per round. Each cake can only lure 1 hamster.
Press button to push out the cake to attract
hamsters. Press button again to quickly release the trap
and catch hamsters while the are still eating. Different hamsters have different scores!
Catch the Golden Hamster to enter the Jackpot
stage. Capture hamsters successfully to win tickets.
12
6. GAME OPTION
6-1 How to Run Setting Mode：
Turn on the power by the power switch on the back of the machine.
Use the key to open the service door in the front.
Press TEST button on the control panel for display setup menu.
6-2 Buttons:
Setting Button：Enter the setting mode/ enter the menu/ exit the menu.
L Select Button：Choice menus/ change parameters，ticket reset.
R Select Button：Choice menus/ change parameter
R_select button L_select buttonSetting button
Ticket counter Coin counter
R_Select L_Select/reset Set
13
6-3 SETTING：
General Setting
Sets system volume/ Free play/ Attract mode/ Lock coin & a Coin can play rounds/
Restore default.
Game Setting
Sets system volume/ idle time/ silent & close light or no/ language.
Business Report
Shows the insert coins/ tickets out.
Payout Control
Sets the payout / difficulty level / jackpot pool.
Restore Default
Restores the initial settings.
Testing
Tests the coin machine and the ticket machine.
Close
Exits the menu, and goes back to the game.
14
6-3-1 General Setting：
Press L_select button or R_select to choose the option, press the test button to enter
the setting menu.
System Vol.：adjusts value：1-100，default：100；
Free play ：sets free play on/off.
Attract mode：When the game is idle, sets attract mode on/off.
Lock coin： during game play, sets the coin machine to lock (yes)/unlock (no).
A coin can play rounds：sets the payout required to play the game.
Restore default： Restore all settings to factory default settings
Save：save settings and return to the main menu.
Cancel：Exit the menu without saving.
15
6-3-2 Game Setting：
Press L_select button or R_select to choose the option, press the test button to enter
the setting menu.
Rounds：sets the number of rounds per game.
Difficulty：sets the game difficulty.
Mercy ticket：sets the game minimum ticket payout.
Blue hamster：sets blue hamster score when caught.
Orange hamster：sets orange hamster score when caught.
Pink hamster：sets pink hamster score when caught.
Gray hamster：sets gray hamster score when caught.
Red hamster：sets red hamster score when caught.
White hamster：sets white hamster score when caught.
Restore default：Restore all settings to factory default settings
Save：save settings and return to the main menu.
Cancel：Exit the menu without saving.
16
6-3-3 Jackpot setting：
Sets the number of times the Golden Hamster appears
Difficulty ：Sets difficulty level of catching the golden hamster.
Golden hamster ticket ：sets number of tickets when Golden Hamster is caught.
Restore default： Restore all settings to factory default settings
Save：save settings and return to the main menu.
Cancel：Exit the menu without saving.
17
6-3-4 Payout Setting：
Use this option to set the payout.
Restore default： Restore all settings to factory default settings
Save：save settings and return to the main menu.
Cancel：Exit the menu without saving.
6-3-5 Business Report：
18
Use this option to check coin in and ticket out.
Clean up date: clears the coin in and tickets out report.
Save：save settings and return to the main menu.
Cancel：Exit the menu without saving.
6-3-6 Testing：
Use this option to test the ticket machine.
Choose TEST operation：choose cancel go back to the menu.
19
7. MAINTENANCE, INSPECTION
7.1 Safety Check
Check the points listed before operating the machine. These checks are necessary for safe machine operation: 1. Try to run the game before operation each day.
2. Conduct monthly routine checks of game components ensure good working condition
3. Check the machine regularly for dust and clean when necessary.
Note: Parts and components require preventative maintenance to be kept running smoothly
7.2 Handling Precautions
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine
• Before servicing the machine, be sure to turn power off. Servicing without turning the power off can cause electric shock or short circuit. • To avoid electric shock or short circuit, do not plug then unplug the power quickly • Do not expose power cords and earth wires, these are susceptible to damage. • Damaged cords and wires can cause electric shock or short circuit and should be replaced immediately. • When or after installing the product, avoid pulling the power cord to prevent unnecessary wear and tear. Use the power button to disconnect power. • In case the power cord is damaged, ask for replacement through where the product was
purchased from or replace locally. Continued usage of damaged cord can cause fire, electric shock or leakage.
• Perform grounding appropriately. Inappropriate grounding can cause electric shock. • Use fuses that meet specified rating. Fuses exceeding can cause an electric shock.
Should a problem occur, turn off the power immediately and stop operating the
machine. Unplug the power cord of the service outlet. Operating the machine without
correcting the problem may cause a fire or injuries.
Insert the power plug securely into the outlet. Poor contact may cause overheating,
resulting in fire or burns.
To ensure the warning labels attached on the machine are visible and legible, install
the machine in a well-lit location, and keep the labels clean at all times. Make sure the
labels are not hidden behind other game machines.
WARNING
20
7.3 Removing/Replacing Console Buttons
1. Turn off the game, disconnect the power.
2. Use the key to open the service door at the front.
3. Reach into the cabinet to locate the console clasp (as shown in the picture below), and
then pull the clasp upwards.
4. Pull the console upwards. Replace the button assembly.
21
7.4 Removing the Display Cover & Replacing the Light
1. Loosen the 6 bolts on two sides of the display cover (See diagram below)
22
2. Remove the display cover.
NOTICE
Use standardized parts only. Failure to do so may damage the equipment or may cause fire.
Do not alter or attempt to change components. It could result in fire or electric shock
To prevent accidents and damages, disconnect the power plug before disassembly.
3. Replace the lights as shown below.
23
8. OVERALL CONSTRUCTION
8.1 Main Assembly 1：
24
No Part No. Code Name Spec. Qty. Note
1 F113-601-000 FKBBSⅡ-00-13 Top menu δ5 1
2 F113-602-000 FKBBSⅡ-00-01 LCD cover ABS δ3 1
3 F113-603-000 FKBBSⅡ-HM-03 L transparent plate PET δ3 1
4 F113-604-000 FKBBSⅡ-HM-01 Decorative board
（front） PET δ3 1
5 F113-401-000 22401000005 Button Assy. White Φ60 1
6 F113-101-000 FKBBSⅡ-00-02 Console Q235 δ2&δ1.5 1
7 F113402-000 23100000006 Ticket machine CL-022Q-386
8 F113-102-000 TY-JX-022 Stainless steel ticket
exit Q235 δ1.5 1
9 F113-403-000 22801000005 Speaker 4”4Ω15W 1
10 F113-103-000 TY-JX-027 4”speaker net Q235 /halftone 1
11 F113-001-000 FKBBSⅡ-02-00 Coin machine Assy. Assy. 1
12 F113-404-000 25300000004 Lock C582 3
13 F113-104-000 FKBBSⅡ-01-21 Lock board Q235 1
14 F113-105-000 TY-JX-006 Ticket box 243 Q235 δ1 1
15 F113-405-000 22803000002 12V80W AMP A80(DC12V 80W×2) 1
16 F113-106-000 FKBBSⅡ-01-22 Coin box (inner) Q235 δ1.2 1
17 F113-107-000 TY-JX-002 Counter install board
A Q235 δ1.5 1
18 F113-108-000 TY-WG-03 Slit Stainless steel 1
19 F113-109-000 FKBBSⅡ-00-08 Coin enter Q235 δ1 1
20 F113-605-000 FKBBSⅡ-HM-02 R transparent plate PET δ3 1
21 F113-406-000 22604000006 Micro. SW BLM-S 3A-125/250VAC 1
22 F113-407-000 22003000003 LED(12V) bulb JA-T810 red 1
23 F113-606-000 FKBBSⅡ-00-03 LCD protect δ5 1
25
8.2 Main Assembly 2：
26
No Part No. Code Name Spec. Qty. Note
1 F113-408-000 22202000019 Spot light rack TH101 1
2 F113-409-000 22004000031 MR11 spot light cup MR11-12V-1W 1
3 F113-110-000 FKBBSⅡ-00-28 Lamp holder δ1 1
4 F113-607-000 FKBBSⅡ-00-22 Decorative board
（upper） δ1 1
5 F113-608-000 FKBBSⅡ-HM-04 Decorative board
（back） δ2 1
6 F113-111-000 FKBBSⅡ-00-24 Spot light gasket δ12 1
7 F113-112-000 FKBBSⅡ-00-21 Hamster install board δ3 1
8 F113-113-000 FKBBSⅡ-00-07 LCD holder Q235 δ2 1
9 F113-410-000 21201022003 LCD LG C222WT 1
10 F113-609-000 FKBBSⅡ-00-09 Lamp cover δ5 1
11 F113-411-000 29740920002 LED lamp LED48NC.PCB 33 Green 1
12 F113-114-000 FKBBSⅡ-00-10 Coin filler Q235 δ1. 1
13 F113-412-000 25102000001 Clasp C124 2
14 F113-115-000 FKBBSⅡ-00-20 L_LED holder δ1 1
15 F113-610-000 FKBBSⅡ-00-18 L_baffle δ8 1
27
8.3 Main Assembly 3
28
No Part No. Code Name Spec. Qty. Note
1 F113-611-000 FKBBSⅡ-00-25 Protect cover Clarity PVC δ1 1
2 F113-413-000 21100000022 PC M6100S 1
3 F113-116-000 FKBBSⅡ-00-12 Power holder δ1.5 1
F113-612-000 FKBBSⅡ-00-12-01 Cushion EVA δ3 2
4 F113-117-000 TY-JX-012 Shockproof bolt A M6 4
5 F113-501-000 FKBBSⅡ-01-23M PC fixation board
(underside) δ15 1
6 F113-502-000 FKBBSⅡ-00-11M PC fixation board δ15 1
7 F113-414-000 TY-JX-001 Power supply holder δ1.2 1
8 F113-118-000 FKBBSⅡ-00-19 R_LED holder δ1 1
9 F113-613-000 FKBBSⅡ-00-17 R_baffle δ8 1
10 F113-801-000 29740922001 LED lamp LED48NC.PCB 36
Green 2
11 F113-002-000 FKBBSⅡ-01-00 Cabinet Assembly 1
29
8.4 Cabinet Assembly
30
No Part No. Code Name Spec. Qty. Note
1 F113-503-000 FKBBSⅡ-01-06M Top board Plywood δ15 1
2 F113-504-000 FKBBSⅡ-01-15M Shop window side board Plywood δ15 2
3 F113-502-000 FKBBSⅡ-01-14M “Display window” underside board Plywood δ15 1
4 F113-506-000 FKBBSⅡ-01-10M Front board（upper） Plywood δ15 1
5 F113-507-000 FKBBSⅡ-01-08M Middle board Plywood δ15 1
6 F113-508-000 FKBBSⅡ-01-09M Standing board Plywood δ15 2
7 F113-509-000 FKBBSⅡ-01-17M Console baffle Plywood δ15 2
8 F113-510-000 FKBBSⅡ-01-01M L side board Plywood δ15 1
9 F113-119-000 26300000001 Hinge 4” 4
10 F113-511-000 FKBBSⅡ-01-12M Front door Plywood δ15 1
11 F113-512-000 FKBBSⅡ-01-03M Doorframe Plywood δ15 1
12 F113-513-000 FKBBSⅡ-01-04M Soleplate Plywood δ15 1
13 F113-514-000 FKBBSⅡ-01-11M Coin box（outside） Plywood δ15 1
14 F113-515-000 FKBBSⅡ-01-02M R side board Plywood δ15 1
15 F113-516-000 FKBBSⅡ-01-16M Clasp holder Plywood δ15 1
16 F113-517-000 FKBBSⅡ-01-13M Strengthen board Plywood δ15 1
17 F113-120-000 FKBBSⅡ-00-26 Lamp box holder Electrolytic panel δ2 6
18 F113-415-000 22006000007 T5 fluorescent lamp T5-8W 110V 2
19 F113-518-000 FKBBSⅡ-01-07M Back board （upper） Plywood δ15 1
20 F113-614-000 25102000098 Handle ABS 2
21 F113-519-000 FKBBSⅡ-01-18M Door baffle Plywood δ15 2
22 F113-507-000 FKBBSⅡ-01-08M Middle board Plywood δ15 1
23 F113-520-000 FKBBSⅡ-01-19M Back door Plywood δ15 1
24 F113-521-000 FKBBSⅡ-01-05M Back board （underside） Plywood δ15 1
25 F113-121-000 TY-JX-005 Wire box Q235 δ1.5 1
26 F113-416-000 25501000049 Caster Nylon 068-44 2
27 F113-122-000 TY-JX-009 Leveler Q235 M16X90 2
28 F113-123-000 FKBBSⅡ-01-20 cushion Q235 δ3 2
29 F113-124-000 TY-JX-014 Jalousie Q235 δ1.5 1
31
8.5 Coin Machine Assembly
No Part No. Code Name Spec. Qty. Note
1 F113-125-000 FKBBSⅡ-02-07 Filler Q235 δ1 1
2 F113-126-000 FKBBSⅡ-02-02 False coin connect
board Q235 δ2 1
3 F113-127-000 FKBBSⅡ-02-03 False coin exit δ1、δ1.5 1
4 F113-128-000 TY-WG-04-02 Exit pole 1
5 F113-129-000 FKBBSⅡ-02-04 Shrapnel 2
6 F113-130-000 FKBBSⅡ-02-01 Coin machine holder Q235 δ1.2 1
7 F113-131-000 FKBBSⅡ-02-06 Coin filler Q235 δ1 1
8 F113-417-000 22301000006 Coin machine 1
9 F113-132-000 FKBBSⅡ-02-05 False coin filler Q235 δ1 1
10 F113-418-000 22604000004 Micro SW CNR-05S-03 1
32
8.4 Counter Assembly
No Part No. Code Name Spec. Qty. Note
1 F113-419-000 23000000005 Counter C-012 DC12V 2
2 F113-420-000 22402010002 button PB：11C02R Red 1
3 F113-421-000 22402030002 button PB：11C02R Black 1
4 F113-422-000 22402050001 button PB：11C02R Green 1
Coin counter Ticket counter
R-SelectL-Select/Reset Set
33
8.6 Electrical Parts：
34
No Part No. Code Name Spec. Qty. Note
1 F113-423-000 22201000001 Lamp holder E27-408 E221399 2
2 F113-424-000 22005010001 Lamp E27 9W white 110V 2
3 F113-425-000 22720000003 Fan SP100A,110-120VAC50/6
0HZ/0.26A 1
4 F113426-000 21902000030 Connection board TB-1506 1
5 F113-802-000 20740844001 Relay board FCXD-DJ.PCB(1.0) 1
6 F113-803-000 21701000025 Main board T8-MainBoad.PCB Ver1.2 1
7 F113-427-000 23200000001 Filter 10SS1-PB 115/250V10A 1
8 F113-428-000 22601000005 Switch T125/55 1
9 F113-429-000 21901000016 Fuse Φ5×20mm T6A 125VAC 1
10 F113-430-000 21902000006 Fuse holder R3-11 110V/250V/10A 1
11 F113-431-000 21602000004 Power supply EPT-S150S12(12V/12.5A) 1
35
8.7 Cabinet Decals, Parts
Front：
36
Back:
37
No Part No. Code Name Spec. Qty. Note
01 F113-701-000 FKBBSⅡ-HM-11 Top menu PVC100u 754×471 1
02 F113-702-000 FKBBS-E-HM-02 Decorative board menu (upper) PVC100u 600×116 1
03 F113-703-000 FKBBSⅡ-HM-04 Decorative board menu
（back） 545×202 δ2 1
04 F113-704-000 FKBBSⅡ-HM-01 Decorative board menu
（front） 498×224 δ3PET 1
05 F113-705-000 FKBBSⅡ-HM-03 L_transparent plate menu 130×478 δ3PET 1
06 F113-706-000 FKBBSⅡ-HM-02 R_transparent plate menu 130×478 δ3PET 1
07 F113-707-000 FKBBSⅡ-HM-07 Console menu 520×208 δ0.2PVC 1
08 F113-708-000 FKBBSⅡ-HM-08 Front door menu PVC100u 527×216 1
09 F113-709-000 FKBBS-E-HM-15 Button decal PVC100u 48×48 1
10 F113-710-000 FKBBSⅡ-HM-17 Score menu 1
11 F113-711-000 TY-HM-34 Ticket payout decal PVC100u 62×20 1
12 F113-712-000 FKBBSⅡ-HM-17 Front door menu (Down) 1
13 F113-713-000 TY-HM-01 Coin counter decal PVC100u 30×6 1
14 F113-714-000 TY-HM-02 Ticket counter decal PVC100u 30×6 1
15 F113-715-000 FKBBSⅡ-HM-09 L_side menu PVC100u 683×1430 1
16 F113-716-000 FKBBS-E-HM-16 Counter decal PVC100u 50×6 1
17 F113-717-000 FKBBSⅡ-HM-10 R_side menu PVC100u 683×1430 1
18 F113-718-000 TY-HM-36 High voltage warning label (small) PVC100u 41×42 3
19 F113-719-000 TY-HM-12 Fuse T6A PVC100u 22×6 1
20 F113-720-000 TY-HM-16 Power SW decal AA PVC100u 12×25 1
21 F113-721-000 TY-HM-40 Label 110V PVC100u 25×6 1
22 F113-722-000 FKBBS-E-HM-12 FCC authentication nameplate δ0.5 248×68 1
38
Have Questions? Contact us!
www.zs-shiyu.com
www.universal-space.com
Canada Office Parts & Service
+1-905-477-2823
Email: [email protected]
