Date post: | 16-Apr-2015 |
Category: |
Documents |
Upload: | venkata-reddy |
View: | 165 times |
Download: | 9 times |
1
REFERENCES
1. A Csébfalvi, G. Csébfalvi, "Effect of Semi-Rigid Connection in Optimal Design of
Frame Structures",6th World Congresses of Structural and Multidisciplinary
Optimization,Rio de Janeiro, 30 May - 03 June 2005, Brazil.
2. Adam S. Christopulos, "Improved Seismic Performance of Buckling Restrained
Braced Frames", A thesis submitted in partial fulfillment of the requirements for the
degree of Master of Science in Civil Engineering,Unive.rsity of Washington,2005.
3. A Joghataie and M. Takalloozadeh, "Improving Penalty Functions for Structural
Optimization", Scientia Iranica Transaction A: Civil Engineering, Vol. 16, No. 4,
2009, pp. 308-320.
4. Kaveh and B. Dadfar, "OPTIMUM SEISMIC DESIGN OF STEEL MOMENT
RESISTING FRAMES BY GENETIC ALGORITHMS", Asian Journal Of Civil
Engineering (Building And Housing), Vol. 9, No. 2, 2008, pp 107-129.
5. ANSI/AISC 341-10, An American National Standard, “Seismic Provisions for
Structural Steel Buildings”, June 22, 2010.
6. AISC/SSEC 327-05, "SEISMIC DESIGN MANUAL", Amercan Institute of Steel
Construction and Structural Steel Educational Council, 2005.
7. Akshay Gupta and Helmut Krawinkler, "SEISMIC DEMANDS FOR
PERFORMANCE EVALUATION OF STEEL MOMENT RESISTING FRAME
STRUCTURES (SAC Task 5.4.3)”, Report No. 132, June 1999.
8. Alaa Sheta and HamzaTurabieh, "A Comparison between Genetic Algorithms and
Sequential Quadratic Programming in Solving Constrained Optimization Problems",
AIML Journal, Vol. 6, Issue 1, 2006, pp.67-74.
2
9. Ali Mehrabian and Achintya Haldar,"Nonlinear Analysis of Steel Frames with
Ductile Connections", Proceedings of IJME - INTERTECH Conference, Proceedings
of IJME - INTERTECH Conference, 2006, Session ENG 204-087.
10. Amador Teran-Gilmore and Neftali Virto-Cambray, "DISPLACEMENT-BASED
PRELIMINARY DESIGN OF LOW-RISE BUILDINGS STIFFENED WITH
BUCKLING-RESTRAINED BRACES", Proceedings of the 9th U.S. National and
10th Canadian Conference on Earthquake Engineering. July 25-29, 2010, Toronto,
Ontario, Canada . Paper No 249
11. Amr S. Elnashai and Luigi Di Sarno, "Fundamentals of Earthquake Engineering
",John Wiley & Sons, Ltd.,2008,ISBN: 978-0-470-02483-6.
12. ANSI/AISC 360-05(2005), ‘Specification for Structural Steel Buildings’,
AMERICAN INSTITUTE OF STEEL CONSTRUCTION One East Wacker Drive,
Suite 700 ,Chicago, Illinois 60601-1802.
13. Arzhang Alimorad et al, “'Probabilistic Performance-Based Optimal Design of Steel
Moment-Resisting Frames. II: Applications”, JOURNAL OF STRUCTURAL
ENGINEERING, June 2007, pp 767-776.
14. ASCE/SEI 7–10, 'Minimum Design Loads for Buildings and Other Structures’,
American Society of Civil Engineers, 2010.Athanasia K. Kazantzi, ”Probabilistic
seismic performance assessment of steel moment resisting frames”, Submitted for the
Degree of Doctor of Philosophy, Faculty of Civil Engineering ,University of Surrey,
2008.
3
15. Behrouz Asgarian (2008), 'Effect of Design Loads in Buckling Restrained Braced
Frames Performance', the 14th World Conference on Earthquake Engineering
October 12-17, 2008, Beijing, China.
16. Bill Tremayne& Trevor E Kelly, ‘Time history analysis as a method of implementing
performance based design’, NZSEE Conference, 2005.
17. Carlos De Oliveira and Jeffrey A. Packer (2009), 'Ample Seismic Protection',
MODERN STEEL CONSTRUCTION JUNE, pp34-36.
18. Charles K. Erdey, "Earthquake Engineering: Application to Design”, John Wiley &
Sons, Inc. ISBN: 978-0-470-04843-6, 2007.
19. Cheng Chenand James M. Ricles,"Stability Analysis of Direct Integration Algorithms
Applied to MDOF Nonlinear Structural Dynamics”, Journal of Engineering
Mechanics, Vol. 136, No. 4, 2010, pp.485-495.
20. Chia-Ming Uang and Masayoshi Nakashima,”Steel Buckling-Restrained Braced
Frames”, CRC Press LLC. 2004.
21. Dasse Design Inc, Structural Engineers, “COST ADVANTAGES OF BUCKLING
RESTRAINED BRACED FRAME BUILDINGS”, San Francisco, CA 94105, 2009.
22. D.C. Rai,"Seismic evaluation and upgrading of chevron braced frames", Journal of
Constructional Steel Research 59, 2003, pp 971–994.
23. Deulkar& al.,”Buckling Restrained Braces for Building Structure”, International
Journal of Research and Reviews in Applied Sciences, Volume 4, Issue 4, 2010, pp
363-372.
4
24. Dhaval P.Advani and Dr. R.K. Gajjar,”Investigation of Efficient Bracing System As
Per IS: 800-2007”, National Conference on Recent Trends in Engineering &
Technology, 2011.
25. Dimitrios G. Lignos at el. (2009),”COLLAPSE ASSESSMENT OF A 4-STORY
STEEL MOMENT RESISTING FRAME”, ECCOMAS Thematic Conference on
Computational Methods in Structural Dynamics and Earthquake Engineering Greece,
22–24 June 2009.
26. Dipti R. Sahoo and Shih-Ho Chao, "Performance-based plastic design method for
buckling-restrained braced frames”, Journal of Engineering Structures Vol.32, 2010,
pp 2950-2958.
27. Do Dai Thang, “Optimum Cost Design of Steel Box-Girder by Varying Plate
Thickness”, KSCE Journal of Civil Engineering, 13(1), 2009, pp 31-37.
28. Dr. N. Subramanian, “Code Of Practice On Steel Structures -A Review Of IS 800
2007”, CE&CR 2008, pp. 114-134.
29. Dr. Sudhir K Jain and Dr. CVR Murty, "Proposed Draft Provisions and Commentary
on Indian Seismic Code IS 1893-(Part-1)", IITK-GSDMA_EQ-15-V3.0.
30. Dr. Sudhir K Jain, "Explanatory Examples on Indian Seismic Code IS
1893-(Part-1)", IITK-GSDMA_EQ-15-V3.0.
31. D. R. Sahoo and S.H. Chao, "PERFORMANCE-BASED PLASTIC DESIGN
METHOD FOR BUCKLINGRESTRAINED BRACED FRAMES", Proceedings of
the 9th U.S. National and 10th Canadian Conference on Earthquake Engineering, July
25-29, 2010, Paper No 591.
5
32. Edison Ochoa, “COMPARATIVE PARAMETRIC STUDY ON NORMAL AND
BUCKLING RESTRAINED STEEL BRACES”, A Dissertation submitted in partial
fulfillment of the requirements for Master Degree in Earthquake Engineering ,July
2003.
33. Eduardo Miranda et al.(1994),”Evaluation of Strength Reduction Factors for
Earthquake-Resistant resign”,EarthquakeSprectra,Vol.10,No.2,pp357-379.
34. Edward L. Wilson,”Three-Dimensional Static and Dynamic Analysis of Structures”,
Computers and Structures, Inc.Berkeley, California, USA, 2002.
35. E.Kalkan,”Lateral load distribution in nonlinear static procedures for seismic design”,
ASCE-Structures, 2004, pp 1-10.
36. E. Salajegheh et al.,” CONTINUOUS DISCRETE VARIABLE OPTIMIZATION OF
STRUCTURES USING APPROXIMATION METHODS”, IJE Transactions A:
Basics Vol. 17, No. 3, September, 2004, pp227-242.
37. E. Salajegheh et al.,"Optimum Performance Based Design of Concentric Steel Braced
Frames”, The 14th World Conference on Earthquake Engineering October 12-17,
2008, Beijing, China.
38. E.S. Kameshki ,” Discrete Optimum Design of Steel Frames by Genetic Algorithm” ,
J. King Saud Univ., Vol. 15, Eng. Sci. (2), 2003,pp. 217-234, Riyadh (1423/2003).
39. Eric Wayne Hoffman, “Improving Optimization of Tall Lateral Force Resisting
Systems Using Non-Linear Time History Analysis and Genetic Algorithms”, A
project submitted to the faculty of Brigham Young University in partial fulfillment of
the requirements for the degree of Master of Science, 2012.
6
40. European Committee for Standardization EN1998-1: Eurocode 8: Design of
structures for earthquake resistance-Part 1: General rules, seismic actions and rules
for buildings, 2004.
41. Fadi Farhat etal., "Application of genetic algorithm to optimization of buckling
restrained braces for seismic upgrading of existing structures", journal of Computers
and Structures 87, 2009,pp 110–119.Federal Emergency Management Agency
(FEMA)-354, “A Policy Guide to Steel Moment-frame Construction”, SAC Joint
Venture, 2000.
42. FEMA- 350, “Recommended Seismic Design Criteria for New Steel Moment-Frame
Buildings”, SAC Joint Venture,2000.
43. FEMA-355F,”Performance Prediction and Evaluation of Steel Moment-Frame
Buildings”, Seismic Hazard and Code Provisions, 2000.
44. FEMA 450-1, “NEHRP Recommended Provisions for Seismic Regulations for New
Buildings and Other Structures”, Part 1: Provisions, 2003.
45. FEMA 450-2, “NEHRP Recommended Provisions for Seismic Regulations for New
Buildings and Other Structures”, 2003.
46. Graham T. Oxborrow, “OPTIMIZED DISTRIBUTION OF STRENGTH IN
BUCKLING-RESTRAINED BRACE FRAMES IN TALL BUILDINGS”, A thesis
submitted to the faculty of Brigham Young University in partial fulfillment of the
requirements for the degree of Master of Science Department of Civil and
Environmental Engineering, 2009.
47. Gregory G. Deierlein, “Nonlinear Structural Analysis for Seismic Design”, A Guide
for Practicing Engineers, NEHRP Seismic Design Technical Brief No. 4, 2010.
7
48. G.S. Prinz, P.W. Richards and S. Fremming, ‘SEISMIC RESPONSE OF
BUCKLING-RESTRAINED BRACED FRAMES WITH BEAM SPLICES’ , The 14
th World Conference on Earthquake Engineering October 12-17, 2008,Beijing, China.
49. H Sudarsan Rao and B Ramesh Babu,”Optimized column design using genetic
algorithm based neural networks’, Indian Journal of Engineering & Materials
Sciences Vol. 13, December 2006,pp.503-511.
50. H. AKHLAGHI and A.S. MOGHADAM, ”Height-Wise Distribution of Peak
Horizontal Floor Acceleration (PHFA)”, the 14th World Conference on Earthquake
Engineering, October 12-17, 2008, Beijing, China.
51. H. Estekanchi and K. Arjomandi, ”COMPARISON OF DAMAGE INDEXES IN
NONLINEAR TIME HISTORY ANALYSIS OF STEEL MOMENT FRAMES”,
Asian Journal Of Civil Engineering (Building And Housing) Vol. 8, No. 6,
pp. 629-646.
52. H.S. Lew and Sashi K. Kunnath, “EVALUATION OF NONLINEAR STATIC
PROCEDURES FOR SEISMIC DESIGN OF BUILDINGS”, Presented at the 33rd
Joint Meeting of the UJNR Panel on Wind and Seismic Effects, 2001.
53. Helmut KRAWINKLER,”SYSTEM PERFORMANCE OF STEEL MOMENT
RESISTING FRAME STRUCTURES”, 12th World Conference on Earthquake
Engineering, 2000.
54. Hyunhoon Choi and Jinkoo Kim,” Energy-based seismic design of buckling-
restrained braced frames using hysteretic energy spectrum”, Engineering Structures
Vol.28, 2006,pp. 304–311.
8
55. Hyunhoon Choi and Jinkoo Kim,’ Evaluation of seismic energy demand and its
application on design of buckling-restrained braced frames ‘, Structural Engineering
and Mechanics, Vol. 31, No. 1,2009,pp. 93-112 .
56. IS 1893-2002, Indian standard: Criteria for Earthquake Resistant Design of
Structures, Part-1, General Provisions and Buildings (Fifth Revision).
57. IS: 800-2007,’Indian Standard GENERAL CONSTRUCTION IN STEEL — CODE
OF PRACTICE’, (Third Revision).
58. Jaan Kiusalaas,”NUMERICAL METHODS IN ENGINEERING WITH MATLAB”,
Second Edition, Cambridge University Press, 2010.
59. JAMES O. MALLEY, “The 2005 AISC Seismic Provisions for Structural Steel
Buildings”, The 2005 North American Steel Construction Conference.
60. Janise E. Rodgers , “Seismic Response Analysis of a 13-story Steel Moment-framed
Building in Alhambra” , Open-File Report 2004-1338, U.S. Geological Survey,
Menlo Park, California.
61. Jeff Barr, “Preliminary Seismic Design Analysis”, Advanced Technology Solar
Telescope (ATST) Project Documentation TN -0095, Revision A, 2007.
62. Jesse T. Cooper, “40 Gold Street – New York, New York”, Technical
Report # 1, 2009.
63. Jinkoo Kim and Youngil Seo,” Seismic design of low-rise steel frames with buckling-
restrained braces”, journal of Engineering Structures 26, 2004, pp 543–551.
64. Jinkoo Kim et al.,”Behavior and design of structures with buckling-restrained
braces”, journal of Engineering Structures 26, 2004, pp.693–706.
9
65. Jinkoo Kim and Hyunhoon Choi, “Energy-based seismic design of structures with
buckling-restrained braces”, Steel and Composite Structures, Vol. 4, No. 6, 2004,
pp. 437-452.
66. JINKOO KIM et al., ‘SEISMIC PERFORMANCE OF TUBULAR STRUCTURES
WITH BUCKLING RESTRAINED BRACES THE STRUCTURAL DESIGN OF
TALL AND SPECIAL BUILDINGS’, Struct. Design Tall Spec. Build. 18, 2009,
pp 351–370.
67. Joghataie A. and M. Takalloozadeh,”Improving Penalty Functions for Structural
Optimization”, Transaction A: Civil Engineering Vol. 16, No. 4, 2009, pp. 308-320.
68. KammulaViswanath and GhamandiLal Meena ,”DYNAMIC ANALYSIS OF
FRAMED STRUCTURES”, A Thesis Submitted In Partial fulfillment of the
requirements for the degree of bachelor of technology in Civil Engineering,
National Institute of Technology Rourkela,2008.
69. Kimberley Robinson and Cameron Black, “Specifying Buckling-Restrained Brace
Systems”, Modern Steel Construction, November 2009.
70. Kimberley Robinson and Cameron Black, "Getting the Most Out of Buckling
Restrained Braces", Modern Steel Construction, November 2011.
71. K.Z. Truman and D.J. Petruska, “Parametric optimal design of steel structures”,
Earthquake Engineering 10th World Conference, Belkema, Rotterdam, 1992,
ISBN 9054100605.
72. Larry A. Fahnestocket et al.,"Analytical and Experimental Studies on Buckling
Restrained Braced Composite Frames" Proceedings of the International Workshop on
10
Steel and Concrete Composite Construction (IWSCCC-2003) (October 2003), pp.
177-188.
73. Lisa Jaylene Aukeman, "ASCE 7-05 DESIGN RULE FOR RELATIVE STRENGTH
IN A TALL BUCKLINGRESTRAINED BRACED FRAME DUAL SYSTEM”,
Master of Science Thesis Presented to The Faculty of California Polytechnic State
University, 2011.
74. Lukas J. Balling, “DESIGN OF BUCKLING-RESTRAINED BRACED FRAMES
USING NONLINEAR TIME HISTORY ANALYSIS AND OPTIMIZATION”, A
thesis submitted to the faculty of Civil Engineering, Brigham Young University in
partial fulfillment of the requirements for the degree of Master of Science,2007.
75. M. D. Symans et al.,"Energy Dissipation Systems for Seismic Applications: Current
Practice and Recent Developments”, Journal of Structural Engineering © ASCE,
2008, pp.3-21.
76. Mamoru IWATA, "APPLICATIONS-DESIGN OF BUCKLING RESTRAINED
BRACES IN JAPAN",13th World Conference on Earthquake Engineering
Vancouver, B.C., Canada August 1-6, 2004, Paper No. 3208.
77. Manicka Selvam.V.K and Bindhu.K.R , “Comparison of steel moment resisting frame
designed by elastic design and performance based plastic design method based on the
inelastic response analysis”, International Journal of Civil and Structural Engineering
Vol. 2, No 4.2012.
78. Mark T. Matthews, ’Impact of Large Gravity Loads on Buckling Restrained Brace
Frame Performance’, A thesis submitted to the faculty of Brigham Young University
in partial fulfillment of the requirements for the degree of Master of Science,2009.
11
79. MEHMET EMRAH ERYAŞAR, "EXPERIMENTAL AND NUMERICAL
INVESTIGATION OF BUCKLING RESTRAINED BRACES", A Thesis Submitted
to the Graduate School of Natural and Applied Sciences of Middle East Technical
University, 2009.
80. Maureen Doyle, “A BARRIER ALGORITHM FOR LARGE
NONLINEAROPTIMIZATION PROBLEMS’, in partial fulfillment of the
requirements for the degree of doctor of philosophy, 2003.
81. Michael Wellford, Andrew Whittaker et. al.(2008), ‘Recommendations for the
Seismic Design of High-rise Buildings’, A Consensus Document - CTBUH Seismic
Working Group, Council on Tall Buildings and Urban Habitat.
82. Min Liu et.al (2005), “Multiobjective optimization for performance-based
seismicdesign of steel moment frame structures”, Earthquake EngngStruct. Dyn,
34:289–306.
83. Mohammad Ali Hadianfard and MahdiehGadami, SEISMIC DEMAND OF STEEL
STRUCTURES WITH MASS IRREGULARITY Journal of Engineering and
Technology.
84. Mohammad Ebrahimi et al.,”Seismic Response Evaluation of Moment Resistant
Frame with Built-Up Column Section’, American J. of Engineering and Applied
Sciences 3 (1),2010, pp.37-41.
85. Mokhtar S. Bazaraa et al., “Nonlinear Programming- Theory and Algorithms”, Willey
International, A John Willey & Sons, Inc.Publications, 2006.
86. N.T.K. Lam et al.(2007), ‘Calculation of Earthquake Actions on Building Structures
in Australia’, EJSE International Special Issue: Loading on Structures.
12
87. Nabih F and G Youssef et al.,”A Survey of Steel Moment-Resisting Frame Buildings
Affected by the 1994 Northridge Earthquake’, Buildingand Fire
ResearchLaboratory,National Institute of Standards and Technology,
Gaithersburg,1995.
88. Venkata Ramana Challa, "NONLINEAR SEISMIC BEHAVIOUR OF STEEL
PLANAR MOMENT-RESISTING FRAMES",A Pd Thesis for the award of Degree
of Doctor of Philosophy,CaliforniaUniversity,1992.
89. Nakashima M. et al., “Steel Moment Frames for Earthquakes in United States and
Japan”, Journal of Structural Engineering, ASCE, 2000, pp. 861-868.
90. Omar El Kafrawy and Ashutosh Bagchi,”Computer Aided Design and Analysis of
Reinforced Concrete Frame Buildings for Seismic Forces”, Information Technology
Journal 6(6), 2007, pp.798-808.
91. ÖzgürYeniay,‘PENALTY FUNCTION METHODS FOR CONSTRAINED
OPTIMIZATION WITH GENETIC ALGORITHMS’, Mathematical and
Computational Applications, Vol. 10, No. 1, 2005,pp. 45-56.
92. Patxi Uriz and Stephen A. Mahin,”Toward Earthquake-Resistant Design of
Concentrically Braced Steel-Frame Structures”, PEER ReportNo.08. University of
California, Berkeley, 2008.
93. Peng Pan et al., “Constraint approach to performance-based design of steel moment-
resisting”, Engineering Structures 29, 2007, pp.186–194.
94. Peter Fajfar, M EERI, “A Nonlinear Analysis Method for Performance Based Seismic
Design”, Earthquake Spectra, Vol.16, No.3.2000, pp.573-592.
13
95. Peter W CLARK, et al., “EVALUATION OF DESIGN METHODOLOGIES FOR
STRUCTURES INCORPORATING STEEL UNBONDED BRACES FOR
ENERGY DISSIPATION”, 12th World Conference in Earthquake Engineering,2000.
96. Pezeshk and C. V. Camp et al. (2000),’ DESIGN OF NONLINEAR FRAMED
STRUCTURES USING GENETIC OPTIMIZATION’, Journal of Structural
Engineering, Vol. 126, No. 3.
97. Star Seismic Europe, "Preliminary design of BRBF system”, Use of equivalent lateral
force method, 2009, www.starseismic.eu.
98. Qiang Xie,”State of the art of buckling-restrained braces in Asia”, Journal of
Constructional Steel Research 61, 2005, pp.727–748.
99. Rafael Sabelli and Walterio Lopez, “Design of Buckling-Restrained Braced Frames”,
the Steel Conference, Modern Steel Construction, March 2004.
100 Rafael Sabelli, "Development of Building Code Provisions for Buckling-Restrained
Braced Frames", Proceedings of STESSA, Behavior of Steel Structures in Seismic
Areas. Naples, Italy, June 2003.
101 Roberta Marstellar,”CHEVRON BRACING IN LOW-RISE BUILDINGS”,Steel-
Wise,Modern Steel Construction,2002
102 Ronald O. Hamburger, ‘Earthquakes and Seismic Design”, Facts for Steel Buildings
Number 3, American Institute of Steel Construction,2009.
103 Saif Hussain et al., “Buckling Restrained Braced Frame (BRBF) Structures- Analysis,
Design and Approvals Issues”, Nippon Steel News, No. 333, 2005.
14
104 Sejal P Dalal et al , “Comparison of Elastic Design and Performance Based Plastic
Design Method Based on the Inelastic Response Analysis using SAP2000”,
International Journal of Computer Applications (0975 – 8887) Volume 45– No.9,2012.
105 Singiresu S. Rao (2009),’Engineering Optimization: Theory and Practice’, Fourth
Edition 2009 by John Wiley & Sons, Inc.
106 Soon-Sik LEE et al. , “PERFORMANCE-BASED SEISMIC DESIGN OF STEEL
MOMENT FRAMES USING TARGET DRIFT AND YIELD MECHANISM”,13th
World Conference on Earthquake Engineering Vancouver, B.C., Canada August 1-6,
2004, Paper No. 266.
107 Star Seismic Europe, “Cost advantages of Buckling Restrained Braced Frame
buildings in accordance with Eurocode”, 2010, www.star Seismic ed.
108 T.K. Datta,’Seismic Analysis of Structures’ , John Wiley & Sons (Asia) Pvt Ltd, 2
Clementi Loop, # 02-01, 2010.
109 Takanori OYA et al., “Practical study on a new type Buckling-Restrained-
Brace”,Proceedings of the International Association for Shell and Spatial Structures,
2009.
110 Taranpreet Singh,” Seismic Evaluation of Reinforced Concrete Buildings”, A Thesis
submitted towards the partial fulfillment of requirements for the award of the degree of
Master of Engineering in Civil Engineering(Structures),Thapar Institute of Engineering
& Technology,2006.
111 Thomas Heaton, “Simulated Performance of Steel Moment-Resisting Frame Buildings
in the 2003 Tokachi-oki Earthquake”, Bull. Earthq. Res. Inst. Univ. Tokyo Vol. 81,
2007, pp.1-5.
15
112 W N Deulkar et al.,”BUCKLING RESTRAINED BRACES FOR VIBRATION OF
BUILDING STRUCTURE”, International Journal of Research and Review in Applied
Sciences (IJRRAS) 4 (4) .2010, pp 363-372.
113 WALTERIO A. LÓPEZ, DAVID S. GWIE, et al.,”Structural Design and
Experimental Verification of a Buckling-Restrained Braced Frame System”,
Engineering Journal / Fourth Quarter, 2004, pp.177-186.
114 Walterio A. López and Rafael Sabelli,”Seismic Design of Buckling- Restrained
Braced Frames”, Structural Steel Educational Council, Technical Information and
Product Service, 2004.
115 Walterio A. López et al.,”Design of Unbonded Braced Frames”, Proceedings 70th
Annual Convention, Structural Engineers Association of California, Sacramento,
California, 2001.
116 Waltario Lopez, "On Designing with Buckling Restrained Braced Frames"
STRUCTURE magazine, 2008, pp.40-41.
117 Yasuyuki NAGANO, “APPLICATION OF OPTIMUM DESIGN METHODS TO
ACTUAL HIGH-RISE BUILDING WITH HYSTERETIC DAMPERS”, 12th World
Conference of Earthquake Engineering, paper No.1463, 2000.
118 Yousef Bozorgnia et.al.,”GUIDELINES FOR PERFORMANCE-BASED SEISMIC
DESIGN OF TALL BUILDINGS”, Report No. 2010/05,PEERC,University of
California, Berkeley .
*****