CWDM Mux/Demux • TOSA & ROSA • Optical Switches • Micro Lens Arrays

CommunicationComponents

Advanced Communications

Tech

The rapid growth in

communications during the

last century and more

recently the Internet’s

relentless need for more

communication capacity

have given rise to the

dramatic evolution in

Optical Networking. Since

its humble beginnings in the

1960s, and following the

wide-spread adoption of

Wave Division Multiplexing

(WDM) technology in the

mid 80s, fibre optic

networks have evolved in to

a dependable infrastructure

that we take for granted

everyday.

Yet much of the power of the fibre optic network still lies close to its

core. Industry studies and anecdotal evidence tells us that a high

percentage of our everyday communication needs is increasing likely to

be satisfied by local content stored in wide area, metro and local access

and distribution networks. So, the challenge then, is to bring affordable

and dependable high bandwidth services to Smart Office workers and

Home market users

Omron’s vision is that optical communications should enrich the way

people live their lives in the twenty-first century. With increased

bandwidths in access and distributions networks, everyone can enjoy an

improved experience in computing, learning, business, security, leisure

and entertainment

We’re driven to seek innovative new optical component solutions that

are both capable of meeting today’s challenging system requirements

and yet be efficiently manufactured in the large volumes necessary for

mass market adoption. Our ground-breaking component designs are the

result of our many years experience at the forefront or precision

replication technology

The developing markets of intra-city metro and access, and now fibre-

to-the-node, to the premises and ultimately to the home (FttH) are

happening now! Omron with its core competencies and break through

technologies is uniquely placed ready to meet the challenges that lie

ahead.

nology

Stability• Over 70 years in the

electronic componentsbusiness, founded in 1933.

• €48 billion global technologyleader (April 2004).

• Employs more than 23,000people.

Quality• All products 100% quality-

tested before shipping.• Designed and manufactured

to the highest ISO 9001, IPCand JIS standards.

• Experts in high volumemanufacturing of small,high-precision parts.

Technology• 7% of sales reinvested

annually in R&D to ensureleading edge solutions thatimprove your customers’products and profits.

• Major R&D emphasis onsensing, microelectronics,communications andmicrophotonics.

• Strong expertise in telecomtechnologies

• Pioneer in MEMS and othermanufacturing advances.

Flexibility• More than 300,000 products

provide a depth of options.• Product customisation and

co-development available.

A name you already know.

A partner you can trust.

Support• Global, regional and local

support in 65 countriesthrough 1,500 offices.

• Documentation availableon-line. Phone and on-lineaccess to sales and technical support.

Environmental• All our components are

100% RoHS compliant.

Flexibl

Take a fresh lookat your designoptions

Welcome to a world of new possibilities.

We’ve developed an innovative range ofultra small form factor packages thatenable you to achieve new space savingsolutions that up until now you neverthought were possible.

Design with more freedom and makebetter use of limited design space withOmron’s space-saving Mux, TOSA/ROSA, Switch and Multimode MLAs.

le

Innovation in Size and Structure

At the heart of each Optical Mux and Switch device

is the Precisely Arrayed and Combined Solutions

(PACS) structure. This enables replicable and

scalable micro-optic designs to be mass produced

cost effectively.

The PACS structure consists of three main

elements

• Fibre array for mechanical coupling

• Omron’s proprietary micro lens array for efficient

light coupling

• Filter and mirror or prism combined with an

actuator to control light signal path function

The Structure

Lens Array Fibre ArrayFilter or Mirror with Actuator

PACS Structure

• Advanced structure achieves ultra small size

packages

• Versatile angle path and free shape micro optics

• Proven mechanical relay & linear actuator

reliability

• User friendly ‘Plug n play’ off the shelf solutions

• High reliability - reduced number of parts and

replicable designs using common platform

technology

The Advantage

Reflector Filter Block

Laser / Detector Fibre Optic Connector

• Our optical subassembly (OSA) products with

‘AfterburnerTM’ technology combine patented

CWDM designs (inc. Zigzag concept) and

integrate small optical elements to deliver ultra

small form factor packages

• Afterburner is versatile enough to work in many

industry standard and custom configurations

Delivering fast,dependablecommunications isthe key to successin today’s ‘alwaysconnected’ world

Combining Core Competencies and Break-Through Technologies

We apply the ideal mix of manufacturing and technological skills to

make reliable, replicable optical components. We’re helping to shape

the future of Next Generation Networks.

Competencies

• Materials

• Precision Assembly

• Stamping

• Molding

• Integration of Active Elements

• Packaging

Technologies

• Switching

• Sensing

• Micro Lens Arrays

• CWDM

• Magnetic Actuators

• Multichannel Micro-optics

• Nano machining

Depen

Building the Future

We make significant

investments in our Photonic

Device R&D and manufacturing

facilities to ensure our

customers can take maximum

advantage of new market

opportunities.

Our fast, flexible support

approach, available globally

means you can count on us to

be here today and tomorrow.

dable

“With Omron you have a technologyleader who understands these needs,providing leading- edge yet economicaloptical component solutions”

Coarse Wavelength Division (CWDM) MultiplexerOmron offers the world’s smallest CWDM Mux/ Demux components! The simplified architecture

with integrated prism array and Thin Film Filters reduces the number of parts for high reliability.

• 4 and 8 channel models (others optionally available)

• All CWDM wavelengths available (ITU694.2), including LX4

• Packages and unpackaged designs

• Ideal for Wavelength expansion (Capacity upgrade), Add & Drop Multiplex (OADM),

Metro, Metro edge and Storage Access Networks, Passive Optical Networks (PON), Fibre to

the Premises/ Node and Home (FttP/ N/ H) and parallel transceivers (LX4)

TOSA & ROSAOmron’s new AfterburnerTM family of OSA products provides a fully integrated E-O/ O-E solution

in a miniaturised package. Available in SX4 (850nm), LX4 (1300nm) and custom configurations.

• Scaleable from 2 to 8 channels

• All channels on one fibre

• Data rate 155Mps – 3.125Gbps per channel

• Low mechanical stress isolation design (SX4)

• Integrated SC ferrule

Optical SwitchThese components deliver great value in a small form factor. Each utilises mechanical actuation

technology together with Omron’s MLA.

• 1x2 and 2x2 with high repeatability VW mirror system

• 1x8 has optimised mechanical latching system combined with a prism

• Use them for redundancy (restoration), OADM, signal routing and monitoring

Micro lens Array (MLA)Omron developed high-precision single shot injection molded MLAs for Multimode applications.

They can easily be applied to meet your parallel coupling and interconnect needs.

• Provides low-cost free space coupling

• Collimating and focusing featured in Flat (plate) type and space-saving right- angle models

• Compatible with industry standard MT ferrule for use in fibre – fibre, fibre – board, MPO,

MTP interconnect (cable and transceiver) and other optical backplane applications

Solu

Versatile Solutions

t ions

Innovative Optical Solutions meeting today’schallenging system requirements

CWDM Mux/Demux

Ordering Information

1. Number of channels: 4 or 82. Classification: Mux = MX, Demux = DX, Mux & Demux = MD3. Starting centre wavelength: e.g. 1471, 1511, 15314. Channel spacing: e.g. ITU 694.2 20nm = 205. Cable length: Blank = Standard 1000mm (or insert in mm)6. Connector type: Blank = Ribbon fibre only (or insert one of the following: SC, FC, MU, LC, SCAPC,

FCAPC, LCAPC) - Other types of connectors available, contact Omron for information

P1X■■A-■■■■S■■-■■■■1 2 3 4 5

4ch / P1X4A

8ch / P1X8A

���

����

����

����

����

���

���

��

����

����

����

����

���

����

���

�����

���

Dimensions

World’s smallest CWDM Mux/ Demux achievedby combining Omron’s MLA with Thin FilmFilters in a proprietary structure (PatentPending).

Note: Typical specifications are at room temperature and include connectors

Specifications P1X4A P1X8A

Structures

Applications● CWDM● WDM-PON● Transponder, Transceiver● OADM (Optical Add/Drop Multiplex)● 3G Basestations● CATV

Number of Channels 4 8

Centre Wavelength 1471,1491,1511,1531,1551, 1571, 1591,1611nm (standard 1471,1491,1511,1531,1551, 1571, 1591,1611nm (standardCWDM) 1275.7, 1300.2, 1324.7, 1349.2 (LX4) (Other wavelengths CWDM) (Other wavelengths available)available)

Pass Band Width >_ 13nm (13.4nm for LX4) _>_ 13nm

Insertion Loss _< 2.0dB (Typ. 1.2dB) _< 2.7dB (Typ. 2.3dB)

Isolation >_ 30dB (Typ. 35dB) >_ 30dB(Typ. 35dB)

Return Loss >_ 35dB (Typ. 40dB) >_ 35dB (Typ. 40dB)

Optical Power 100mW 100mW

Operating Temperature 0 to 70°C 0 to 70°C

Stoage Temperature -40 to 85°C -40 to 85°C

Dimensions W7.2 x L14.5 x H4.7mm W7.2 x L14.5 x H4.7mm

6

Features● Ultra small form factor● Space saving single-sided entry ribbon fibre● Versatile free mounting direction● CWDM and LX4 wavelengths available● Flange package available

4 Ch Transmit or Receive Optical Subassembly

Specifications

The Afterburner SX4 is a protocol independentCWDM-based Optical Subassembly (OSA) Capableof Transmitting (TX) and Receiving (RX) fouroptical channels on one multi-mode Fibre.Features● 100m transmission (62.5µm) and 300m (50µm)● Scalable to 8 channels and bi-directional● Integrated VCSEL or PINs, TIA and Amp● LVPECL & CML data IO● Loss-of-Signal Alarm (LOS)

Structures

CWDM TOSA/ ROSA

P1RX/ TX-SX4

Dimensions (mm)

Ordering Information

1. Classification: Transceiver = TR, Transmitter = TX, Receiver = RX, Breakout/Test board = EB,MCU board & Package = MC

2. Number of Ports: Non Multiple Channels = Non, or Number of Channels3. Suffix for Structure: ( A-Z )4. Function: 850nm based - 3 ch OUT = SX3, 4 ch OUT = SX4, 4 ch OUT, 2 ch IN = SX42 1300nm based,

4 ch OUT = LX45. Application: Data = D, TIA = T, TIA only with RSSI = TR, TIA & Limiter = TL, Video = V6. Package: Non-hermetic, integrated flex, side-exit, SC ferrule = 01, Hermetically sealed*, flexless,

rear-exit, SC ferrule = 02, Hermetically sealed*, flexless, rear-exit, LC ferrule = 03 *Not fully RoHS complaint

P1■■-■■■■■■■■■■1 2 3 4 5 6

P1RX/ TX-SX4 plugs in to a 27 pin 0.3mm pitch FPC connector. For information on thespecifications of the connector contact Omron (P/N XF2B-2745-31), Molex (P/N 52931-2790) or Hirose (P/N FH18-27S-0.3SHW)

P1-RX Functional Block

P1-TX Functional Block

Reflector Filter Block

Laser / Detector Fibre Optic Connector

Parameter Min Typ Max Min Typ Max Units

Data Rate SX4v 0.1552 1.65 0.1552 1.65SX4d 0.1552 3.125 0.1552 3.125 Gbps

Differential Voltage 500 700 900 400 1600 mVp-p

Max. Temperature (Ceramic) 0 70 0 70 °C

OMA Sensitivity at Max Data Rate1

-14.25 -16.25 -6.25 dBm

Wavelength Range 771.5 856.5 771.5 856.5 nm

Peak Optical Power (/Ch) +1.0 +1.0 dBm

Optical Rise/ Fall Time2

110 Ps

Input Differential Impedence 100 110 Ps

Power Consumption (3.3V) 660 858 858 967 mW

Four PINsQuad TIA/Post Amp SC

Four SW VCSELQuad Laser Driver SC

● Data rate from 155Mbps – 3.125Gbps max andaggregation possible to max 12.5Gbps

● SC optical interface● LX4 model option available

Applications● DVI & HDMI extension links ● Fibre Channel (FC) FDDI TX/ RX

Notes: 1. Measured at the end of a 2m section of 62.5? fiber. The maximum and minimum of the allowed range of average transmitter power per channel coupled into the fiber are worst-case values to account for manufacturing variances and drift due to temperature.

2. Rise and fall times measured from 20 - 80%

P1-RX P1-TX

Optical Switch

12.6

7.62

5.65

31.630

8.4

2.7

StructuresDimensions (mm)

1x2/ P1S12B

2x2/ P1S22BSmall, high performance single mode switchutilising Omron’s proprietary Micro Lens Arrayand precision assembly technology.

Applications● Redundancy, Restoration/ Protection● OADM (Optical Add/ Drop Multiplex)

Specifications P1S12B/P1S22BParameter 1 x 2 and 2 x 2Wavelength Range 1290-1360nm, 1530-1625nmInsertion Loss _< 1.2dB (Typ. 0.8dB)PDL _< 0.25dBReturn Loss >_ 40dB (Typ. 45dB)Repeatability _< 0.1dBCross Talk >_ 55dBSwitching Time _< 4msec (Typ. 2.3msec)Durability >_ 10 millionOptical Power 500mWRated Voltage 5VDCPower Consumption 100mW1 &140mW2

Operating Temp. Range -5 to +70°CStorage Temp. Range -40 to +85°CHumidity 5 to 85%HRExternal Dimensions W12.6 x L31.6 x H8.4mm

Note: 1. Latching 2. Non-latching. Typical specifications are at room temperature and include connectors except Insertion Loss

Ordering Information

1. Number of channels: 1 = 1x2, 2 = 2x22. Latching function: Blank = Non latching, L = Latching (standard)3. Wavelength range: D = 1290 – 1360 & 1530 – 1625nm4. Cable length: Blank = Standard 1000mm (or insert in mm)5. Connector type: Blank = Ribbon fibre only (or insert one of the following: SC, FC, MU, LC, SCAPC,

FCAPC, MUAPC, LCAPC)

P1S■■2B-■■■■-■■■■1 2 3 4 5

Features● Small size and high repeatability achieved using

our unique high-precision miniature actuator● Latching function for low power consumption*● Monitor contact for checking actuator state● Precise optical path transfer with moulded V/W mirror● Space saving single-sided fibre ribbon entry* Non-latching also available

● OXC (Optical Cross Connect)● Monitoring & measurement

1 x 8 – P1S18B

StructuresDimensions

Optical Switch

Single mode switch offering smallest size and costsavings through innovative mechanical design.

1. Other wavelength ranges available. Typical specifications are at room temperature and include connectors except Insertion Loss

Ordering Information

1. Latching function: L = Latching (standard)2. Wavelength range: D = 1290 – 1330 & 1520 – 1580nm (Dual window)3. Model designation: D = With Driver cicuit 4. Cable length: Blank = Standard 1000mm (or insert in mm)5. Connector type: Blank = Ribbon fibre only (or insert one of the following: SC, FC, MU, LC, SCAPC,

FCAPC, MUAPC, LCAPC

P1S18B-■■■■■■-■■■■1 2 3 4 5

Applications● Monitoring & measurement (e.g. OTDR)● OADM (Optical Cross Connect Multiplex)● OXC (Optical Cross Connect)● Sensor network control

Control

Features● State-of-the-art linear actuator minimises thenumber of

parts with high resistance to vibration● Power saving polarised magnetic latching function● Bi-directional● Optimised performance by external resistor● Space saving single-sided fibre ribbon entry

Specifications P1S18BWavelength Range1 1290-1330nm, 1520-1580nm Insertion Loss _< 2.0dB (Typ. 1.0dB) PDL _< 0.2dBReturn Loss >_ 40dB (Typ. 45dB)Repeatability _< 0.1dBBuilt-in Circuit Power DriverCross Talk >_ 55dBIsolation @8x1use >_ 55dBDirectivity @8x1use >_ 50dBInput Optical Power 500mWMounting Direction Choose from 3-axis, 5 directionsOperating Temp. Range -0 to +70°CStorage Temp. Range -40 to +85°CPower Source +5V±0.25V, 310mADurability 1,000,000 cyclesSwitching Time 130m secExternal Dimensions W16 x L63.5 x H8.5mm

Multimode Micro Lens Array

*1 Light Source: 850nm (Steady State Mode by LED)/Air Gap: 1.5mm(Lens to Lens) Attached to the MT guide pin without any otheralignment and matching glue

*2 Light Source: 850nm VCSEL(*12um, Divergence < 30°)/Air Gap:0.3mm(VCSEL to Lens), 0.3mm (Lens to Fibre) active alignment forVCSEL side non active alignment for fibre side without matchingglue between fibre and lens

12ch Flat – P1L12A-C1/-C2/-F1/-F2

12ch Right Angle – P1L12C-F1/-F2

Flat and right angle type Micro Lens Arraysprovide low cost optical coupling infree space applications

Features

● Easy alignment with high precision positioning holes

based on MT guide pins

● Low cost achieved by high precision injection moulding

● Anti-reflective (AR) coating option available

● Insertion loss (IL) can be reduced through customisation

● Custom lens and various channel configurations available (i.e. 1 x 4, 2 x 12, etc.)

Dimensions

*3 Light Source: 850nm (Steady State Mode by LED)/Air Gap: 0.4mm(Fibre to Lens) Attached to the MT guide pin without any otheralignment and matching glue

*4 Light Source: 850nm VCSEL(*12um, Divergence < 30°)/Air Gap:0.3mm (VCSEL to Lens), 0.5mm (Lens to Fibre) active alignment for VCSEL side non active alignment for fibre side without matching glue between fibre and lens

*5 Lens position tolerance is defined as an error to the trueposition referred to the center point of alignment holes

Specifications P1L12A-C1/-C2 P1L12A-F1/-F2 P1L12C-F1/-F2

Type Flat (Collimator Type) Flat (Focuser Type) Right Angle

Number of Lens 1 x 12 1 x 12 2 x 12

Insertion Loss _< 2.0dB _< 2.5dB _< 2.5dB

(Typ. 1.2dB) *1 (Typ. 1.5dB) *2 (Typ. 1.5dB) *3/*4

Cross Talk >_ 50dB >_ 50dB >_ 50dB

Lens Position Tolerance 0.005mm *5 0.005mm *5 0.005mm *5

Operating Temperature Range -40 to +85°C -40 to +85°C -40 to +85°C

Storage Temperature Range -40 to +85°C -40 to +85°C -40 to +85°C

Dimensions W2.5 x L6.4 x H0.55mm W2.5 x L6.4 x H0.55mm W2.6 x L6.4 x H2.6mm

● Board-to-board

● Chip-to-chip Interconnection

Applications

● Free-space Optical Coupling

● Transceiver (For Parallel Optical Link)

● Optical Interconnection

Multimode Micro Lens Array

Ordering Information

1. Type: Flat (plate) = A, Right-angle = C

2. Working distance & function: Flat (plate) Collimate 850nm LED: 1.5mm = C1, 2.5mm = C2

Flat (plate) Focus 850nm VCSEL to lens & lens to fibre: 0.3mm = F1, 0.2mm = F2

Right-angle Focus 850nm VCSEL to lens 0.3mm & lens to fibre 0.5mm = F1

Right-angle Focus 850nm LED, fibre to lens 0.3mm = F2

P1L12-■■■■1 2

Selection Guide

Example of free-space coupling efficiency in a Multimode application

Model P1L12A P1L12CFunction C1 C2 F2 F1 F2 F1

Coupling Image

Feature Plate type, 12ch Plate type, 12ch Plate type, 12ch Plate type, 12ch Right-angle type for Right-angle type forCollimator (short gap) Collimator (long gap) Focuser (short WD) Focuser (long WD) fibre coupling, VCSEL coupling,

without gap with gap between re-direction by total re-direction by totalbetween L & F L & F internal reflection internal reflection

(F - F) (VCSEL-F)Comment Available for Focuser Designed for longest IL: approx 3dB Without guide holes

spot size: F2, F1, C1 gap (VCSEL-F) VCSELSpecification Insertion Loss (IL) ≤2.0dB (typ 1.2dB) ≤2.5dB (typ 1.5dB) ≤2.5dB (typ 1.5dB)

Crosstalk (XT) ≥50dBError of Centre (µm) ≤5µm circleTotal Error (µm) - - - - ≤10µm

Measurement Light Source 850nm LED (steady-state mode) 850nm VCSEL (Ø12µm) Divergence <30°) 850nm LED (steady- 850nm VCSEL (Ø12µm)Condition state mode) Divergence <30°)

Coupling Distance 1.5mm 2.5mm VCSEL - Lens: VCSEL - Lens: Fibre - Lens: 0.4mm VCSEL - Lens: 0.3mm(mm) 0.2mm 0.3mm Lens-Fibre: 0.5mmOther Condition Without index matching glue between Without index matching glue between Non active alignment Non active alignment

fibre and lens fibre and lens for fibre sideNon active alignment Non active alignment for fibre side Using fixed jig Active alignment for

VCSEL sideUsing fixed jig Active alignment for VCSEL side -

Application Multimode fibre:, transmission and reflective free space parallel optical interconnect; Proprietary backplane, Multi-fibre interconnect based on MT, MT-RJ, MPO, MTP; SNAP12 Transmitter/ Receiver; POP4 modules; Infiniband; ODVI; Alternative to GRIN and ball lens

Without AR coating

Head Office

Omron Electronic Components Europe B.V.Wegalaan 572132 JD HoofddorpThe NetherlandsTel: +31 23 568 1200Fax: +31 23 568 1222

Email: opticaldevice@eu.omron.comwww.omroncomponents.com

Omron Electronic Components Europe B.V. reserves the right to make any changes to its specifications, technical information and dataof the components described in this brochure at its sole discetion without prior notice.Although we strive for perfection, Omron Electronic Components Europe B.V. does not warrant or make any representations regardingthe correctness or accuracy of its specifications, technical information and data of its components as descibed in this brochure.

Omron ElectronicComponents Europe B.V.Sales Division Benelux Wegalaan 572132 JD HoofddorpThe Netherlands

Tel: +31 23 568 1200Fax: +31 23 568 1212

Omron ElectronicComponents Europe B.V.Sales Division Central EuropeGruber Strasse 60d85586 PoingGermany

Tel: +49 8121 77240Fax: +49 8121 772440

Omron ElectronicComponents Europe B.V.Sales Division France14, rue de Lisbonne93561 Rosny Sous BoisFranceTel: +33 1 56 63 19 00Fax: +33 1 48 55 97 75

Omron ElectronicComponents Europe B.V.Sales Division IberiaArturo Soria 9528027 MadridSpain

Tel: +34 91 377 7900Fax: +34 91 377 7987

Omron ElectronicComponents Europe B.V.Sales Division ItalyViale Certosa 4920149 MilanoItaly

Tel: +39 02 3268 850Fax: +39 02 3268 851

Omron ElectronicComponents Europe B.V.Sales Division NordicBox 1275Norgegatan 1S-164 32 KistaSweden

Tel: +46 8 632 35 00Fax: +46 8 632 35 35

Omron ElectronicComponents Europe B.V.Sales Division UK & Ireland1 Bishop SquareHatfield Business ParkHatfield, HertfordshireAL10 9NEUnited Kingdom

Tel: +44 870 750 5661Fax: +44 870 750 5662

Omron ElectronicComponents Europe B.V.Eastern Europe, CIS, ME &AfricaMlynske Nivy 43BratislavaSlovak Republic

Tel: +421 2582 40950Fax: +421 2582 40999

Ref. Y901-E2-02