1
OPTICAL DISSOLVED OXYGEN
ANALYZER
POWER TEST ALARM
FN
endeeProtects your Plant & Personnel
ENDEE
WA-200 WAP WRC-201
OPTICAL TECHNOLOGY FOR OPTIMIZED MEASUREMENTS
WITH DISSOLVED OXYGEN PROBE
Optical Luminescence Technology
No Calibration, No membrane, No electrolyte, No drift
No cross sensitivity with pH 1-14, CO2, H2S, SO2
Real time temperature, salinity and pressure compensation
Fast response sensor
Body in stainless steel or Titatanium
ASTM international method D888-05 and ISO 17289 compliance
Compact, Strong and Light
Digital technology (MODBUS RS 485)
Optical Dissolved Oxygen measurement no flow requirements
2
SPECIAL FEATURES
Simple System Integration
Graphic LCD - Quick, Reliable System Status Checks
No Mechanically Moving Parts
Fast Response Time
Accurate Monitoring
Minimal maintenance
Field Replacement Sensor
Internal Datalogger
SPECIFICATIONS
Model No.
Type
Parameters
Electronics / processor
Technology
Power supply
Display
Alarm
Response time
Operating temperature
Input
Output
Housing
Indication LED
Power consumption
Dimensions
Protection class
Weight
WRC-201
Panel mounting
Dissolved Oxygen
Micro-controller
Optical / Luminescence
230 V AC
Graphic LCD
Visual LED alarms, adjustable
Instantaneous
0°C - 55°C
RS 485, MODBUS
RS 485, 4-20 mA
ABS Hi-Impact Plastic
Power ON, Test, High alarm
< 5 Watt
96 x 96 x 160 mm
IP 65
600 gm
WA-200
Wall mounting
Dissolved Oxygen
Micro-controller
Optical / Luminescence
230VAC, 50Hz
Graphic LCD
Visual LED alarms, adjustable
Instantaneous
0°C - 55ºC
RS 485, MODBUS
RS 485, 4-20 mA
ABS Hi-Impact Plastic
Power ON, Test, High alarm
< 5 Watt
270 x 240 x 150 (LBH)
IP 65
1.7 Kg
WAP
Portable
Dissolved Oxygen
Micro-controller
Optical / Luminescence
Rechargeable battery
Graphic LCD
Visual, audible
<1s
0°C - 50ºC
RS 485, Direct Plug-in
USB, Datalogging
ABS Hi-Impact Plastic
LOW, HIGH
< 5 Watt
200 x 94 x 37.5 mm
IP 65
330 gm
CONTROLLERHANDHELD
CONTROLLER CONTROLLER
3
APPLICATIONS
Oil ,Food ,Chemical Industries
Municipal Water Treatment
Boiler Feed Water
Oil Refineries
Food Processing Wash Water
Raw Water Plants
Environmental Monitoring
Monitoring of UV-Disinfection in Water Plants
Sewage Treatment Plants
Drinking Water Plant
SENSOR CONTROLLER ARRANGEMENT
ENDEE
ENDEE ENGINEERS PVT. LTD.Office : N/25, Laxmi Industrial Estate, New Link Road, Andheri (W), Mumbai - 400 053.
Tel. : 022 4295 2180 / 81
Email : [email protected]
Website : www.endee-engineers.com
Note : Images shown are indica�ve only. Specifica�ons and Features will vary with applica�on. There may be changes over�me due to con�nuous development process.
@ 2018
4
Measuring Principle
Measure Ranges
Resolution
Accuracy
Response time
Frequency of recommended measure
Water move
Temperature compensation
Stocking temperature
Sensor power supply
Consumption
Sensor
Dimensions
Weight
Material
Maximum pressure
Connection
Protection
Optical measure by luminescence
0-20 mg/l, 0-20 PPM, 0-200 %
0.01
± 0.1 mg/l, ±0.1 PPM, ± 1%
90% of the value in less than 60 seconds
> 5 second
No necessary move
Via NTC
-10°C to +60°C
5 to 12 volts
Standby 25 μA
Average RS-485 (1 measure / seconds)
Average SD112 (1 measure / seconds)
Current pulse : 100 mA
Diameter: 25mm, length: 146mm
Stainless steel version 300g (sensor + cable 3m)
Titanium version 300g (sensor + cable 3m)
Stainless steel 316 L, New body in titanium
5 bars
9 armoured connectors, polyurethane jacket, barewires
or waterproof fisher connector
IP 68
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
SENSOR SPECIFICATIONS
ORDERING INFORMATION
MODEL NO.
WA-200
WAP
WRC-201
RANGE
A. 0 - 20 mg/l
B. 0 - 20 PPM
C. 0 - 200 %
CABLE LENGTH
1. 3 meter
2. 7 meter
3. 15 meter
4. Beyond 15meter
Eg: WA-200 Dissolved Oxygen A. 0 - 20 mg/l 3. 15 meter
SENSOR /
PARAMETERS