+ All Categories
Home > Documents > Optical transmitter MATV - SMATV

Optical transmitter MATV - SMATV

Date post: 30-Dec-2021
Category:
Upload: others
View: 10 times
Download: 0 times
Share this document with a friend
2
WALLfit ® is a registered trademark lthe electrical and mechanical characteristics are subject to change without notice The WALLfit ® TX85 transmitter is perfect for use in closed environments or areas with very little ventilation. The unit was designed with a generous cooling surface that maintains its operation, whilst preserving its robustness and durability, The extensive use of "switched" power systems, with conversion efficiency in the order of 98%, reduces both internal heat and total energy consumed. WALLfit ® TX85 transmitter complies with all European standards in terms of safety and CO2 emissions. The TX85 optical transmitter is the highest level of transmitters in the WALLfit® range. Its considerable +8dBm output power, in combination with the WALLfit® socket, can create a TV - SAT fiber optic network for up to 128 users. Offering high linearity over the entire band, and very high energy efficiency, thanks to the "switching mode" power supply system, the TX85 is an extremely important element for transferring analogue or digital TV and SAT signals, while maintaining their quality, minimizing interference and intermodulation. TX85 Optical transmitter MATV - SMATV TV - SAT signal input FC connector optical fiber output SC / APC connector power cable 220 Vac ± 15%
Transcript
Page 1: Optical transmitter MATV - SMATV

WALLfit ® is a registered trademark

lthe electrical and mechanical characteristics are subject to change without notice

The WALLfit® TX85 transmitter is perfect for use in closed environments or areas with very little ventilation. The unit was designed with a generous cooling surface that maintains its operation, whilst preserving its robustness and durability,

The extensive use of "switched" power systems, with conversion efficiency in the order of 98%, reduces both internal heat and total energy consumed.

WALLfit® TX85 transmitter complies with all European standards in terms of safety and CO2 emissions.

The TX85 optical transmitter is the highest level of transmitters in the WALLfit® range.

Its considerable +8dBm output power, in combination with the WALLfit® socket, can create a TV - SAT fiber optic network for up to 128 users.

Offering high linearity over the entire band, and very high energy efficiency, thanks to the "switching mode" power supply system, the TX85 is an extremely important element for transferring analogue or digital TV and SAT signals, while maintaining their quality, minimizing interference and intermodulation.

TX85Optical transmitter MATV - SMATV

TV - SAT signal input FC connector

optical fiber output SC / APC connector

power cable 220 Vac ± 15%

Page 2: Optical transmitter MATV - SMATV

WALLfit ® is a registered trademark

Technical features

Levels of use RecommendedRecommended input signal levels with the SMATV optical transmitter mod. TX85:

• Digital signal input (DVB-T / T2) TV: 80 to 85 dBμV

• Digital signal input (DVBS / S2) SAT: 75 to 80 dBμV SAT

the electrical and mechanical characteristics are subject to change without notice


Recommended