HIGH PERFORMANCE MACHINES FOR PET BOTTLES PRODUCTION

optima turboSERIES 4/8

HIGH EFFICIENCY MACHINE

= 98%h

optima 4 turbo optima 8 turbo

KEY ADVANTAGES

up to 40 bar

0,25 - 2.5 L

up to 7200 bph (0,5L)

up to 7100 bph (1,0L)

up to 6500 bph (1,5L)

up to 5800 bph (2,0L)

up to 5000 bph (2,5L)

78 kW

34 kW31,0 m /min36,0 m /min

4

24V / DC

FORTAL

•

•

•

•

•

•

•

•

•

•

•

Cost effective production of high quality PET bottles

Innovative and energy saving preform heating system

Low air consumption

Quick, simple neck and mold changeover

Advanced central lubrication system

Innovative preform loading system with auto-stop mechanism

High-tech and precise servomotors system /fully electric machine

Optimized manipulator movements for faster machine operation

High output per one cavity

Orientated bottle output – easy to connect with air conveyor

Small footprint

up to 40 bar

0,25 - 1.5 L

up to 14000 bph (0,5L)

up to 12000 bph (1,0L)

up to 10500 bph (1,5L)

120 kW

65 kW32,0 m /min

310,0 m /min

8

24V / DC

FORTAL

MAIN PARAMETERS

Blowing pressure

Bottle size

Output*

Power installed

Effective power (1,0L bottle)

Working air quantity (10 bar)**

Working air quantity (40 bar)**

Number of cavities

Steering voltage

Mould material **bottle 1L, max power

POWER

EXTREMELY LOWPOWER CONSUMPTION

MACHINE NEEDS34kW

ENERGY TO BLOW7100 BOTTLESOF 1.0L VOLUME

1 BOTTLE = 4.7W ONLY

AIR

OPTIMALIZEDAIR CONSUMPTION

DEAD VOLUMEOF ONLY250 ml

PER BOTTLE

OVERALL

MACHINE

EFFICIENCY

= 98%h

SMF Maschinenrfabrik GmbH Redcarstrasse 40, D-53842 Troisdorf-Spich, Germany, www.smfgmbh.comPh.: +49 2241 944 886-0, Fax +49 2241 944 886-99, e-mail: info@smfgmbh.com

Air collector with reduced

dead volume of air only

0,25 L per bottle (cavity).

Quick neck changeoverwithout any tooling

Ceramic NIR™ - new type of oven with nearly twice

lower energy consumption.

Quick mould change

QMC system

Single preform transmission unit

eliminates complex movements –

– faster preform transport

VO

LU

ME

0,25 – 2,5 L

DIA

METER

NECKRIN

G

UNDER NECKRING

Hm

in.

11

mm

Min. 18 mm – Max. 42mm

HEIG

HT

Hm

ax.

340m

m

BOTTLE DIMENSIONS optima 4 turbo

NECKRIN

G

UNDER NECKRING

Hm

in.

11

mm

Min. 18 mm – Max. 42mm

HEIG

HT

Hm

ax.

340m

m

DIA

METER

VO

LU

ME

0,25 – 1,5 L

BOTTLE DIMENSIONSoptima 8 turbo

UNIQUEFEATURES

AI

R

OPTIMALIZED

AIR

CONSUMPTION

EXTREMALYLOWPOWERCONSUMPTION

MACHINE NEEDS

34kWENERGY TO BLOW

7100 BOTTLESOF 1.0L VOLUME

1 BOTTLE= 4.7W ONLY

DEAD VOLUME

OF ONLY

250 ml

PER BOTTLE

= 98%h

AN EXAMPLE OPTIMA 4 TURBO LAYOUT

optima 8 turbo

SCOPE OF SUPPLY

The whole set that is delivered to the customers, besides the PET blow moulding machine, consists usually of following equipment:• Preform feeding system with the preform accumulation

container (hooper), preform conveyor, orientator and gravity rails. It includes also electric and steering components.

• Preform tilter DUMPER DRH-500 (OPTIONAL) – machine designed to automation the process of PET containers production. Thanks to that solution, preforms are placed in the hooper automatically. The operator needs only to exchange the pallets with the octabins filled with preforms. It makes the process faster and easier.

• Bottle exit conveyor – its construction enables direct connection with the air conveyor or any other.

• Electric cabinet and machine steering system – it is based on components of well-known brands and meets all the European standards and requirements.

• Compressors station – based on the screw compressor made by German company KAESER which cooperates with SMF for over 12 years. Whole set consists of screw compressor, booster, air dryers with filters, air tanks, connections and steering box. Parameters of the compressors are described in point 3 of this offer.

• Water cooling system – OPTIMA machine is equipped in water cooling system that includes efficient water chiller (OPTIONAL).

loading star

gravity rails

mould trolley

optima 4 turbolayout

optima 8 turbolayout