+ All Categories
Home > Self Improvement > Optimization in HFSS

Optimization in HFSS

Date post: 11-May-2015
Category:
Upload: naveen-kumar
View: 1,565 times
Download: 13 times
Share this document with a friend
Description:
These are the steps to be followed to use the Optimetrics feature in HFSS. This feature lets a user to optimize his/her design and its parameters by employing several techniques.
Popular Tags:
8
Optimization in HFSS 1. Open Design properties--> select optimization select the variables you want to optimize.
Transcript
Page 1: Optimization in HFSS

Optimization in HFSS1.

Open Design properties--> select optimization select the variables you want to optimize.

Page 2: Optimization in HFSS

2.

Page 3: Optimization in HFSS

3.

Page 4: Optimization in HFSS

4.

Select the variables then set the minimum and maximum values of these variables also set the minimum and maximum steps to be change in the value press OK

Page 5: Optimization in HFSS

5.

Set the No. of Iterations Click on setup calculations then press Add calculation in new window click done.

Page 6: Optimization in HFSS

6.

Set goal to value 1 Click OK.

Page 7: Optimization in HFSS

7.

Right click on Optimization Setup1Click Analyze Wait for the no. of iterations to be completed.

You can also see what changes are there in each iteration by clicking View Analysis Result.


Recommended