Screening and Conveyor Solutions Trellex Cer-Lag ceramic pulley lagging
EN
Optimized belt friction in any condition
A lack of friction between the conveyor belt and pulley causes slippage—always a concern in difficult working conditions, especially when it’s wet or muddy. Besides the obvious belt damage, the need to compensate with higher belt tension puts added stress on all conveyor components, including rollers and bearings. Trellex® Cer-Lag pulley lagging is an easy, cost-effective way to ensure optimal belt tension in any condition, minimizing the risk for expensive stoppages, maintenance and damage.
Friction in any condition
• Increasesfrictionbetweendrivepulleyandbelt, especially in wet and muddy conditions
• Protectsbeltandconveyorsystem
• Minimizesneedformaintenance
• Reducescostlydowntime
• Extremelyhighwearresistance
• Stockitem,availablequicklyworldwide
Get a better grip — wherever, wheneverLikeallproductsfromMetso,Cer-Lagpulleylagging is purpose-designed to improve your operational efficiency and bottom line. Trellex Cer-Lag is available in most regions aroundtheglobe,andyournearestMetsorepresentative will be happy to provide adviceandarrangeforquickandcorrectdeliveryandinstallationifnecessary.Ifyou’dlike to know more about Cer-Lag right away, please visit us at www.metso.com.
An investment in better performance Trellex Cer-Lag pulley lagging optimizes friction between the pulley and belt, protecting your belt and conveyor system and minimizing costly work interruptions. Cer-Lag’s circular ceramics are profiled for fluid drainage, providing grip in all conditions. Their design and vulcanized Trellex T60 rubber shell ensure increased wear life and less abrasion to the belt comparedtosquareceramics,meaningfewerstops for maintenance. Conveniently available with or without a contact layer, Trellex Cer-Lag is also easy to install by cold gluing. Your conveyor belt is only earning if it’s moving. When the going gets tough, Cer-Lag pays off.
Coefficient of friction
Trellex Cer-LagRubber laggingSteel0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0,0Dry Medium Wet & muddy
PartNo.: MM0348645Description: TrellexCer-Lag16x250x10000CL with contact layer
PartNo.: 6660541Description: TrellexCer-Lag16x250x1600
PartNo.: 6680149Description: TrellexCer-Lag10x250x1600 Material: Wearrubber,60+5°ShA, with round ceramic tilesInstallation: Bycoldgluing
Trellex® is a registered trademark of Metso Corporation
Metso Minerals (Sweden) ABScreeningandConveyorSolutionsP.O.Box132SE-23122TrelleborgSwedenPhone:+4641052500Fax:+4641052602www.metsominerals.com
For contact with your localMetsorepresentative,visitwww.metsominerals.com/trellex
Subjecttoalterationwithoutpriornotice. BrochureNo.2820-11-12-SBL/Trelleborg-English© 2012.03Metso PrintedinSweden