S E R I E S
S P E C I F I C A T I O N S
LPG/Gasoline
Cushion Tire Models
3,000 - 3,500 lb.
OPTIMUMJC30 JC35
• Legendary Nissan Quality
• Enhanced Comfort Through Innovative Design
• Low Total Cost of Ownership
• Powerful Performance
• Clean Air Reduced Emissions Engine Options
• Outworks the Competition
JC30 3000 lb.JC35 3500 lb.
S p e c i f i c a t i o n scharacteristics
1 Manufacturer Manufacturer’s name Nissan Nissan2 Model Model designation JC30 JC353 Capacity Rated capacity lbs (kgs) 3000 (1500) 3500 (1750)4 Load Center Distance in (mm) 24 (500) 24 (500)5 Power Type Gas - LP Gas-LP Gas-LP6 Operator Orientation Sit or stand Sit Sit
dimensions
7 Tire Type Front and rear Cushion Cushion8 Wheels Number (x = driven) front / rear 2 x / 2 2 x / 29 Mast Maximum fork height (MFH) in (mm) 130 (3300) 130 (3300)10 Standard freelift in (mm) 11 (280) 11 (280)11 Forks Thickness and width in (mm) 1.5 x 4 (40 x 100) 1.5 x 4 (40 x 100)12 Tilt Angle Standard mast- fwd / back degree 5 / 10 5 / 1013 Overall Length - to face of forks in (mm) 80.4 (2045) 81.8 (2080)14 Dimensions Width - standard tires in (mm) 38.2 (970) 38.2 (970)15 Overall ht. lowered (OHL) - standard mast in (mm) 83.1 (2110) 83.1 (2110)16 Overall height @ MFH w/ LBR in (mm) 179.3 (4555) 179.3 (4555)17 Overhead guard height in (mm) 81.1 (2060) 81.1 (2060)18 Height standard load back rest (LBR) in (mm) 48 (1220) 48 (1220)19 Width standard carriage (with Nissan mast) in (mm) 32.5 (825) 32.5 (825)20 Grade Clearance Ramp breakover angle / departure angle tan �% 37 / 35 37 / 3521 Turning Radius Minimum outside in (mm) 68.3 (1735) 69.5 (1765)22 Overhang Front in (mm) 14.7 (375) 14.7 (375)23 Rear in (mm) 18.5 (470) 17.9 (455)24 Minimum Right Angle Stacking Aisle Add load length and clearance in (mm) 83.1 (2110) 84.3 (2140)
performance
25 Speeds Max travel speed - forward or reverse mph (km/h) 10.9 (17.5) 10.9 (17.5)26 Lift speed - full load / no load fpm (mm/sec) 100.4 / 112.2 (510 / 570) 100.4 / 112.2 (510 / 570)27 Lowering speed - full load / no load fpm (mm/sec) 98.4 / 108.2 (500 / 550) 98.4 / 108.2 (500 / 550)28 Drawbar Pull Maximum Full load / no load - gasoline lbs (kgs) 3970 / 1430 (1800 / 650) 3970 / 1320 (1800 / 600)
Full load / no load - lpg lbs (kgs) 3750 / 1430 (1705 / 650) 3750 / 1320 (1705 / 600)
weight
29 Gradeability Maximum Full load / no load - gasoline % 36 / 18 36 / 1630 Full load / no load - lpg % 36 / 18 36 / 1631 Truck Weight Standard truck, no load lbs (kgs) 5873 (2665) 6314 (2865)32 Weight Distribution Front axle (no load) lbs (kgs) 2141 (970) 1993 (905)33 Rear axle (no load) lbs (kgs) 3732 (1695) 4321 (1960)34 Tire Size Front in (mm) 18 x 6 x 12-1/8 (455 x 150 x 310)35 Rear in (mm) 14 x 4-1/2 x 8 (355 x 115 x 205)
chassis
36 Wheelbase Distance between axles on centers in (mm) 47.2 (1200) 47.2 (1200)37 Tread-Center of Tire Front / rear in (mm) 32.2 / 31.5 (820 / 800) 32.2 / 31.5 (820 / 800)38 Front dual tires in (mm) N/A N/A39 Ground Clearance Under mast in (mm) 3.0 (75) 3.0 (75)40 Service Brake Type - drum & shoe Drum & Shoe Drum & Shoe41 Parking Brake Hand or foot applied Hand Hand
drive line
42 Steering Type Hydrostatic Hydrostatic43 Manufacturer / Model Nissan / H20-II Nissan / H20-II44 Engine Rated output (SAE gross / JIS) - gasoline hp/rpm (PS/rpm) 50 / 2400 (46 / 2400)
Rated output (SAE gross / JIS) - lpg hp/rpm (PS/rpm) 47 / 2400 (43 / 2400)45 Rated torque (SAE gross / JIS) - gasoline ft-lb - rpm (kg-m/rpm) 116 / 1600 (15.5 / 1600)
Rated torque (SAE gross / JIS) - lpg ft-lb - rpm (kg-m/rpm) 110 / 1600 (14.5 / 1600)46 Displacement cu in (cm3) 120.94 (1982)47 Transmission Number of speeds forward / reverse 1 / 1 1 / 148 Type Automatic Automatic
NOTE: Performance specifications based on Nissan wide-view mast (130" MFH) unless otherwise noted.
S E R I E S
OPTIMUMJC30 JC35
S t a n d a r d E q u i p m e n t
Ergonomics / Safety❖ Independent float system (IFS) greatly reduces vibration at
every point of operator contact- Brake and inching pedals mounted to the truck frame
reduce pedal vibration- Rubber mounted shock absorber within the steering column
reduces steering wheel vibration- Top panel design with rubber insulated mounts, rubber
seals and fiberglass insulation reduces vibration, engine heat and noise within the entire operator compartment
❖ Full suspension seat with weight and back angle adjustmentmaximizes operator comfort
❖ 5" of front-to-back seat adjustment allows greater operator legroom
❖ Hip restraints with retractable seat belts provide greater opera-tor security
❖ Infinitely adjustable steer column enhances operator comfortand productivity
❖ Exclusive single lift/tilt lever allows simultaneous lifting andtilting to increase operator efficiency
❖ Heel/toe pedal design provides efficient motion for reducedeffort and fatigue
❖ Separate inching pedal allows full RPM lifting while making precise maneuvers increasing operator efficiency
❖ Durable welded metal assist grip and metal traction plate on theentry step allows safe and easy compartment entry and exit.Metal diamond tread compartment floorboards provide positivefooting
❖ Hydrostatic power steering reduces operator steer effort and fatigue❖ Low front cowl design enhances forward visibility of fork tips
for better load handling efficiency❖ Textured three spoke steering wheel allows excellent visibility of
the dash display for greater operator awareness of truck status❖ Dash display visibly communicates the following truck status
and warnings for operator awareness: fuel level, hour meter,water temperature, oil temperature, oil pressure, torque con-verter oil temperature, coolant level warning, battery chargeindicator, LPG tank bracket lock warning, and air cleaner condition indicator
❖ Audible back-up warning alarm promotes a safer work environment
❖ Standard light package includes two front overhead guardmounted headlights with protective guards for greater operational visibility
Performance / Durability❖ Nissan H20-II, 2.0 liter, four cylinder, in-line engine features an
oversquare design which efficiently produces superior horse-power with reduced vibration and noise
❖ Nissan-designed engine and transmission system effectivelyutilizes all available torque to provide exceptional power andperformance
❖ Dual hydraulic filtration keeps system free from contaminantsincreasing reliability and component life
❖ Rugged, fabricated steel I-beam steer axle construction, protects steer cylinder components while providing reliable per-formance
❖ High air intake system on the overhead guard pillar pulls incool, clean air for better engine performance
❖ Cyclone air cleaner with replaceable filter keeps contaminantsout for longer engine life
❖ Self-adjusting, self-energizing brakes are sealed to keep contaminants out resulting in longer component life and reliable performance
❖ Contoured counterweight design enhances truck maneuverability❖ Rugged, unitized frame design incorporates an integral
hydraulic tank for better heat dissipation, increased durabilityand long life
Consult your local Nissan Forklift Representative for additional optional equipment.
O p t i o n a l E q u i p m e n t
❖ Nissan’s exclusive three stage Optiview mast provides 50%greater visibility for increased productivity and load handlingefficiency. Free lift cylinders are nested behind mast rails for alarger field of view
❖ Choice of exclusive Optiview three stage, Wide-View, Duplex,or standard Triplex masts
❖ Separate lift and tilt levers with pistol grip type knobs❖ Standard or polished and tapered forks in a variety of lengths
(36", 42", 48", 54", and 60")❖ Rotating beacons and strobe lights❖ Hydraulic accumulator in the lift system❖ CARB compliant Clean Air Reduced Emissions engine
with either gas or LPG fuel system
❖ Auxiliary hydraulics w/internal hose reeving❖ Side shifter❖ Extra tilt❖ Electronic Engine Management System to provide
- Throttle body fuel injection- Enhanced performance and efficiency- Engine shutdown system with limp home mode- Electronic governor
❖ Cotton core radiator ❖ Rearview mirrors
Performance / Durability (continued)❖ Piccolo exhaust system disperses exhaust without dirt and
debris kick-up❖ Corrugated fin-type radiator with engine shroud provides
enhanced cooling performance❖ Nissan’s flat face mast design features rolled steel channels, large
cross sections, and thick inner rails for increased capacity retention❖ Powder coat paint provides a durable, high gloss finish inside
and out for increased scratch resistance, improved U.V. protection, and an exceptional appearance
Serviceability❖ Clamshell hood design opens nearly 90 degrees for maximum
accessibility to engine and truck components. Two gas springsassist and retain the hood in the open position
❖ Two-piece steel, diamond tread floorboard is easily removedfor access to components and grease fittings
❖ One-touch radiator cover is easily removed, without the use oftools, for cooling system checks
❖ Hatch in the floorboard allows quick and easy transmissionfluid level checks
❖ Opening in the dash panel allows quick and easy brake fluidlevel checks
❖ Five-piece reinforced overhead guard design allows easyreplacement should parts become damaged; slotted designallows excellent upward visibility for load handling and placement
❖ Nissan’s exclusive swing-out LPG bracket simplifies tankchange-out. A lamp on the dash display warns the operator ifthe bracket is not properly locked in place
❖ All grease fittings are easily accessible for routine maintenance❖ Side thrust rollers on the fork carriage are easily accessed for
carriage adjustments
S E R I E S
OPTIMUMJC30 JC35
J C 3 0 & J C 3 5 m a s t s
NOTES:
Nissan forklifts meet or exceed all ANSI B56.1 Safety Standards for Powered Industrial
Trucks and Underwriter’s Laboratories requirements as to fire hazard for gasoline, LP gas
and diesel. Performance may vary as the specifications shown represent nominal values
obtained under typical operating conditions.
Nissan Forklift Corporation, North America, reserves the right to make product changes
relating to colors, equipment or specifications without notice. For more information, contact
your Nissan Forklift representative.
Printed in USA
SS-OPT-C1 01-02
S E R I E S
JC30 3000 lb.JC35 3500 lb.
OverallMaximum Height
Mast Type Fork Height Lowered Freelift Standard(MFH) (OHL) (FL) Tilt
in (mm) in (mm) in (mm) F/B Degree
Wide-View 82 (2085) 59.1 (1500) 11 (280) 5/10
Wide-View 106 (2690) 71.3 (1810) 11 (280) 5/10
Wide-View 130 (3300) 83.1 (2110) 11 (280) 5/10
Wide-View 146 (3710) 93.3 (2370) 11 (280) 5/10
Wide-View 157 (3990) 100.8 (2560) 11 (280) 5/10
Duplex 105.5 (2680) 72 (1830) 48 (1220) 5/10
Duplex 129.5 (3289) 84 (2135) 60 (1530) 5/10
Triplex 1 152 (3850) 71.3 (1810) 47.6 (1210) 5/5
Triplex 1 169 (4300) 77.2 (1960) 53.5 (1360) 5/5
Triplex 1 187 (4750) 83.1 (2110) 59.4 (1510) 5/5
Triplex 1 203 (5154) 88.2 (2240) 64.8 (1645) 5/5
Triplex 1 217 (5500) 93.3 (2370) 69.7 (1770) 5/5
Triplex 1 236 (6000) 100.8 (2560) 77.2 (1960) 5/5
Optiview 1 161 (4090) 77.2 (1960) 52 (1320) 5/5
Optiview 1 178.7 (4540) 83.1 (2110) 57.9 (1470) 5/5
Optiview 1 194.5 (4940) 88.4 (2245) 63 (1600) 5/5
Optiview 1 208.3 (5290) 93.3 (2370) 68.1 (1730) 5/5
Optiview 1 228 (5790) 100.8 (2560) 75.6 (1920) 5/5
240 N. Prospect StreetMarengo, IL 60152 USAPhone (815) 568-0061Fax (815) 568-0179
www.nissanforklift.com
OPTIMUMJC30 JC35
1 Wide drive tires are standard. Overall truck width is 38.2"
C a p a c i t y a t M F H u s i n g 1 8 7 " Tr i p l e x M a s t
Load Center (in)
Cap
acit
y (l
bs)
7000
6000
5000
4000
3000
2000
8000
1000
00 24 28 32 36 40 44 48 52
JC35JC30
14
MFH
OHL
FL
1124
37
21
37
12
18
34 22 36
13
23
17
35
43.1"(1095mm)
Ask your Nissan Forklift representative about our Clean Air Reduced Emissionsengine options.
MAILING ADDRESS
Contact Info
SOCIAL MEDIA
Phone: 615-255-6321
Toll Free: 800-752-1882
Email: [email protected]
Web: www.forkliftsystems.com
Forklift Systems Incorporated
884 Elm Hill Pike
Nashville, TN 37210
CONTACT INFO
Click Map to Open Google Map of Location
Tennessee Main Office: 884 Elm Hill Pike, Nashville, TN 37210
(615) 255-6321
Click Map to Open Google Map of Location
Alabama Main Office: 132 West Park Drive, Birmingham, AL 35211
(205) 945-1112
Electric Pallet Trucks
Scissor Lifts & Boom Lifts Rack & Storage Systems In-Plant Office - Building
Industrial Utility Vehicles Personnel Shuttles Burden Carriers
Rider Sweeper & Scrubber Walkie Sweeper & ScrubberReach Truck & Order Picker
I.C. & Electric ForkliftsLarge Capacity Forklifts
[email protected] www.forkliftsystems.com
Other Products