OptiX OSN 7500 II&7500&3500&1500 Configuration Guide (Packet Transport Domain)(V200R011)

OptiX OSN 7500 II/7500/3500/1500V200R011C03

Configuration Guide (PacketTransport Domain)

Issue 03Date 2013-02-20

HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Huawei Technologies Co., Ltd. Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders. NoticeThe purchased products, services and features are stipulated by the contract made between Huawei and thecustomer. All or part of the products, services and features described in this document may not be within thepurchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representationsof any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd.Address: Huawei Industrial Base

Bantian, LonggangShenzhen 518129People's Republic of China

Website: http://www.huawei.comEmail: [email protected]

Issue 03 (2013-02-20) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.

i

About This Document

Related VersionsThe following table lists the product versions related to this document.

Product Name VersionOptiX OSN 7500 II V200R011C03OptiX OSN 7500 V200R011C03OptiX OSN 3500 V200R011C03OptiX OSN 1500 V200R011C03iManager U2000 V100R006C00 and later

Intended AudienceThis document describes the configuration of different types of Ethernet services of the OptiXOSN equipments with regard to configuration flow, networking diagram, service planning, andconfiguration process.This document describes the methods of configuring different types of Ethernet services on theU2000.The intended audience of this document is:l Installation and commissioning engineerl Data configuration engineer

Symbol ConventionsThe symbols that may be found in this document are defined as follows.

OptiX OSN 7500 II/7500/3500/1500Configuration Guide (Packet Transport Domain) About This Document


ii

Symbol Description

DANGERDANGER indicates a hazard with a high level or mediumlevel of risk which, if not avoided, could result in death orserious injury.

WARNINGWARNING indicates a hazard with a low level of risk which,if not avoided, could result in minor or moderate injury.

CAUTIONCAUTION indicates a potentially hazardous situation that,if not avoided, could result in equipment damage, data loss,performance deterioration, or unanticipated results.

TIP Provides a tip that may help you solve a problem or save time.

NOTE Provides additional information to emphasize or supplementimportant points in the main text.

GUI ConventionsThe GUI conventions that may be found in this document are defined as follows.

Convention DescriptionBoldface Buttons, menus, parameters, tabs, window, and dialog titles

are in boldface. For example, click OK.> Multi-level menus are in boldface and separated by the ">"

signs. For example, choose File > Create > Folder.

Change HistoryUpdates between document issues are cumulative. Therefore, the latest document issue containsall updates made in previous issues.

Updates in Issue 03 (2013-02-20) Based on Product VersionV200R011C03

This document of the V200R011C03 version is of the third release. Compared with Issue 02,Issue 03 includes the following updates in V200R011C03SPC200:l "E-Line Service Parameters (Configuration on a Per-NE Basis)" is optimized in section

"Parameter Description: E-Line Service."



iii


This document of the V200R011C03 version is of the second release. Compared with theprevious release, this version has the following new or optimized contents:l Updated the document based on its supporting NMS.


This document of the V200R011C03 version is of the first release. Compared with the previousrelease, this version has the following new or optimized contents:l In topic "Configuring E-Line Services", the description of "Configuration Example: E-Line

Services Carried by PWs (Network Adjustment Based on VLAN Priorities)" is added.l In topic "Configuring E-Line Services", the description of "Configuration Example: E-Line

Services Carried by PWs (Network Adjustment Based on VLAN Switching)" is added.l "Configuring UNI-NNI E-Line Services Carried by PWs on a Per-NE Basis" is optimized.l "Configuring E-Line Services Carried by PWs in End-to-End Mode" is optimized.l "E-Line Service Parameters (Configuration on a Per-NE Basis)" is optimized.l "E-Line Service Parameters (Configuration in End-to-End Mode)" is optimized.


This document of the V200R011C02 version is of the second release. Compared with theprevious release, this version has the following new or optimized contents:l In topic "Configuration Example: E-AGGR Services Carried by PWs", the description of

"Configuration Process (in End-to-End Mode)" is added.l In topic "Configuration Task Collection", the description of "Creating E-AGGR Services

Carried by PWs in End-to-End Mode" is added.l In topic "Configuration Task Collection", the description of "Configuring an ATM Policy

Profile" is added.l In topic "Configuration Task Collection", the description of "Configuring an ATM CoS

Mapping Profile" is added.l In topic "Parameter Description", the description of "Parameters for Configuring E-AGGR

Services (End-to-End Mode)" is added.l "Split Horizon Group" is optimized.



iv


This document of the V200R011C02 version is of the first release. Compared with the previousrelease, this version has the following new or optimized contents:l "Configuring ATM Services" is added.l In topic "Configuration Task Collection", the description of "Configuring ATM PWE3

Services" is added.l In topic "Configuration Task Collection", the description of "Managing the Blacklist" is

added.l In topic "Parameter Description", the description of "Parameter Description: ATM/IMA

Services" is added.l In topic "Parameter Description", the description of "Parameter Description: Address

Parse" is added.l "Creating the Network" is optimized.l "Configuration Example: E-Line Services Carried by PWs" is optimized.


This document of the V200R011C01 version is of the second release. Compared with theprevious release, this version has the following new or optimized contents:l In topic "Managing PWE3 Services", the description of "Searching for PWE3 Services" is

added.l In topic "Configuration Task Collection", the description of "Configuring the NE-Level

TPID" is added.l In topic "Parameter Description", the description of "Parameter Description: CES Port" is

added.l In topic "Parameter Description", the description of "Parameter Description: MPLS OAM"

is added.l In topic "Parameter Description", the description of "Parameter Description: MPLS Tunnel

APS" is added.l "Creating Optical Fibers by Searching for the Optical Fibers on the NMS" is optimized.l "Verifying the Correctness of E-Line Service Configuration" is optimized.l "Configuring an MPLS Tunnel" is optimized.


This document of the V200R011C01 version is of the first release. Compared with the previousrelease, this version has the following new or optimized contents:



v

l In topic "Configuration Task Collection", the description of "Managing MPLS Tunnels"is added.

l In topic "Configuration Task Collection", the description of "Managing MPLS Tunnel APSProtection Groups" is added.

l In topic "Parameter Description", the description of "Parameter Description: CES Services"is added.


This document of the V200R011C00 version is of the second release. Compared with the firstrelease, the contents of this document are modified or optimized as follows:l In topic "Operation Task for Configuring E-LAN Services", the description of "Configuring

E-LAN Services Carried by PWs in End-to-End Mode" is added.l In topic "Configuration Example: E-LAN Services Carried by PWs", the description of

"Configuration Process (in End-to-End Mode)" is added.l "Configuring Cross-Domain Services" is optimized.


This document of the V200R011C00 version is of the first release. Compared withV100R009C03, this version has the following new or optimized contents:l OptiX OSN 7500 is added.l "Starting the T2000" is deleted.l "Getting Started" is added.l "Creating the Network" is added.l "Configuring E-Line Services Carried by PWs in End-to-End Mode" is added.l "Configuring Cross-Plane Services" is added.l "Configuring CES Services" is added.



vi

Contents

About This Document.....................................................................................................................ii1 Getting Started...............................................................................................................................1

1.1 Starting or Shutting Down the U2000................................................................................................................21.1.1 Starting the U2000 Server.........................................................................................................................21.1.2 Logging In to the U2000 Client.................................................................................................................21.1.3 Exiting a U2000 Client..............................................................................................................................31.1.4 Shutting Down the U2000 Server..............................................................................................................3

1.2 Main Windows and Common Operations of the U2000....................................................................................41.2.1 Components of the Client GUI..................................................................................................................41.2.2 Key GUI Components...............................................................................................................................61.2.3 Frequently Used Buttons...........................................................................................................................71.2.4 Shortcut Icon..............................................................................................................................................91.2.5 Common Shortcut Keys...........................................................................................................................111.2.6 Main Windows........................................................................................................................................12

1.2.6.1 Workbench......................................................................................................................................121.2.6.2 Main Topology...............................................................................................................................121.2.6.3 NE Explorer....................................................................................................................................141.2.6.4 Clock View.....................................................................................................................................151.2.6.5 NE Panel.........................................................................................................................................171.2.6.6 Browse Alarm.................................................................................................................................171.2.6.7 Browse Event..................................................................................................................................171.2.6.8 Browse Performance Window........................................................................................................18

2 Creating the Network.................................................................................................................192.1 Creating NEs, Fibers and Subnet......................................................................................................................20

3 Configuring E-Line Services.....................................................................................................213.1 Basic Concepts.................................................................................................................................................23

3.1.1 E-Line Services........................................................................................................................................233.1.2 UNI..........................................................................................................................................................273.1.3 NNI..........................................................................................................................................................28

3.2 Configuration Flow for the E-Line Services....................................................................................................283.2.1 Configuration Flow for the UNI-UNI E-Line Services ..........................................................................293.2.2 E-Line Services Carried by Ports ...........................................................................................................33

OptiX OSN 7500 II/7500/3500/1500Configuration Guide (Packet Transport Domain) Contents


vii

3.2.3 E-Line Services Carried by PWs ............................................................................................................353.2.4 E-Line Services Carried by QinQ Links .................................................................................................38

3.3 Configuration Example: UNI-UNI E-Line Services........................................................................................433.3.1 Networking Diagram...............................................................................................................................433.3.2 Service Planning......................................................................................................................................443.3.3 Configuration Process..............................................................................................................................45

3.4 Configuration Example: E-Line Services Carried by Ports..............................................................................483.4.1 Networking Diagram...............................................................................................................................483.4.2 Service Planning......................................................................................................................................493.4.3 Configuration Process..............................................................................................................................513.4.4 Verifying the Correctness of E-Line Service Configuration...................................................................53

3.5 Configuration Example: E-Line Services Carried by PWs (Newly Created)...................................................553.5.1 Networking Diagram...............................................................................................................................553.5.2 Service Planning......................................................................................................................................573.5.3 Configuration Process (in End-to-End Mode).........................................................................................603.5.4 Configuration Process (Configuration on a Per-NE Basis).....................................................................663.5.5 Verifying E-Line Services.......................................................................................................................74

3.6 Configuration Example: E-Line Services Carried by PWs (Network Adjustment Based on VLAN Priorities)................................................................................................................................................................................75

3.6.1 Networking Diagram...............................................................................................................................753.6.2 Service Planning......................................................................................................................................773.6.3 Configuration Process (in End-to-End Mode).........................................................................................803.6.4 Configuration Process (Configuration on a Per-NE Basis).....................................................................873.6.5 Verifying E-Line Services.......................................................................................................................95

3.7 Configuration Example: E-Line Services Carried by PWs (Network Adjustment Based on VLAN Switching)................................................................................................................................................................................97

3.7.1 Networking Diagram...............................................................................................................................973.7.2 Service Planning......................................................................................................................................993.7.3 Configuration Process (in End-to-End Mode).......................................................................................1023.7.4 Configuration Process (Configuration on a Per-NE Basis)...................................................................1083.7.5 Verifying the Correctness of E-Line Service Configuration.................................................................117

3.8 Configuration Example: E-Line Services Carried by QinQ links..................................................................1183.8.1 Networking Diagram.............................................................................................................................1183.8.2 Service Planning....................................................................................................................................1203.8.3 Configuration Process............................................................................................................................1213.8.4 Verifying the Correctness of E-Line Service Configuration.................................................................124

4 Configuring E-LAN Services...................................................................................................1274.1 Basic Concepts...............................................................................................................................................128

4.1.1 E-LAN Services.....................................................................................................................................1284.1.2 UNI........................................................................................................................................................1314.1.3 NNI........................................................................................................................................................1324.1.4 Split Horizon Group..............................................................................................................................132

4.2 Configuration Flow for the E-LAN Services.................................................................................................133



viii

4.2.1 E-LAN Services Carried by Ports ........................................................................................................1334.2.2 E-LAN Services Carried by PWs .........................................................................................................1384.2.3 E-LAN Services Carried by QinQ Links ..............................................................................................142

4.3 Configuration Example: E-LAN Services Carried by Ports...........................................................................1464.3.1 Networking Diagram.............................................................................................................................1464.3.2 Service Planning....................................................................................................................................1474.3.3 Configuration Process............................................................................................................................1494.3.4 Verifying the Correctness of E-LAN Service Configuration................................................................153

4.4 Configuration Example: E-LAN Services Carried by PWs...........................................................................1554.4.1 Networking Diagram.............................................................................................................................1564.4.2 Service Planning....................................................................................................................................1574.4.3 Configuration Process (in End-to-End Mode).......................................................................................1614.4.4 Configuration Process (Configuration on a Per-NE Basis)...................................................................1634.4.5 Verifying the E-LAN Service Configuration........................................................................................169

4.5 Configuration Example: E-LAN Services Carried by QinQ links.................................................................1704.5.1 Networking Diagram.............................................................................................................................1704.5.2 Service Planning....................................................................................................................................1714.5.3 Configuration Process............................................................................................................................1734.5.4 Verifying the Correctness of E-LAN Service Configuration................................................................177

5 Configuring E-AGGR Services...............................................................................................1805.1 Basic Concepts...............................................................................................................................................181

5.1.1 E-AGGR Services..................................................................................................................................1815.1.2 UNI........................................................................................................................................................1835.1.3 NNI........................................................................................................................................................184

5.2 Configuration Flow for the E-AGGR Services..............................................................................................1845.2.1 E-AGGR Services Carried by Ports .....................................................................................................1855.2.2 E-AGGR Services Carried by PWs ......................................................................................................189

5.3 Configuration Example: E-AGGR Services Carried by Ports........................................................................1955.3.1 Networking Diagram.............................................................................................................................1955.3.2 Service Planning....................................................................................................................................1975.3.3 Configuration Process............................................................................................................................198

5.4 Configuration Example: E-AGGR Services Carried by PWs........................................................................2035.4.1 Networking Diagram.............................................................................................................................2035.4.2 Service Planning....................................................................................................................................2055.4.3 Configuration Process (in End-to-End Mode).......................................................................................2085.4.4 Configuration Process (Configuration on a Per-NE Basis)...................................................................211

5.5 Verifying the Correctness of E-AGGR Service Configuration......................................................................2176 Configuring Cross-Domain Services.....................................................................................221

6.1 Introduction to the Cross-Connect Board.......................................................................................................2226.2 Configuration Flow for the Cross-Domain Services......................................................................................2236.3 Configuration Example (Application Scenario 1)..........................................................................................226

6.3.1 Networking Diagram.............................................................................................................................226



ix

6.3.2 Service Planning....................................................................................................................................2276.3.3 Configuration Process............................................................................................................................231

6.4 Configuration Example (Application Scenario 2)..........................................................................................2356.4.1 Networking Diagram.............................................................................................................................2356.4.2 Service Planning....................................................................................................................................2366.4.3 Configuration Process............................................................................................................................240

6.5 Configuration Example (Application Scenario 3)..........................................................................................2446.5.1 Networking Diagram.............................................................................................................................2446.5.2 Service Planning....................................................................................................................................2456.5.3 Configuration Process............................................................................................................................251

6.6 Testing Cross-domain Services......................................................................................................................2556.6.1 Using the Ping Commands to Test Cross-domain Services..................................................................2566.6.2 Using Loopbacks to Test Cross-domain Services.................................................................................258

7 Configuring CES Services........................................................................................................2607.1 Introduction to CES........................................................................................................................................2617.2 Configuration Flow for the CES Services......................................................................................................263

7.2.1 Configuration Flow for UNI-UNI CES Services..................................................................................2637.2.2 Configuration Flow for the UNI-NNI CES Services.............................................................................264

7.3 Configuration Example (UNI-UNI CES Services)........................................................................................2667.3.1 Networking Diagram.............................................................................................................................2667.3.2 Service Planning....................................................................................................................................2667.3.3 Configuration Process............................................................................................................................267

7.4 Configuration Example (UNI-NNI CES Services)........................................................................................2707.4.1 Networking Diagram.............................................................................................................................2707.4.2 Service Planning....................................................................................................................................2717.4.3 Configuration Process (Configuration on a Per-NE Basis)...................................................................2757.4.4 Configuration Process (in End-to-End Mode).......................................................................................281

7.5 Verifying CES Service Configuration............................................................................................................2898 Configuring ATM Services......................................................................................................292

8.1 Introduction to ATM......................................................................................................................................2938.2 Configuration Flow for the ATM Services.....................................................................................................294

8.2.1 Configuration Flow for UNI-UNI ATM Services.................................................................................2948.2.2 Configuration Flow for UNIs-NNI ATM Services...............................................................................295

8.3 Configuration Example (UNI-UNI ATM Services).......................................................................................2978.3.1 Network Diagram..................................................................................................................................2978.3.2 Service Planning....................................................................................................................................2988.3.3 Configuring an ATM Service on a Per-NE Basis..................................................................................300

8.4 Configuration Example (UNIs-NNI ATM Services).....................................................................................3048.4.1 Network Diagram..................................................................................................................................3048.4.2 Service Planning....................................................................................................................................3068.4.3 Configuration Process (in End-to-End Mode).......................................................................................3108.4.4 Configuration Process (Configuration on a Per-NE Basis)...................................................................335



x

8.5 Verifying ATM Service Configuration..........................................................................................................3559 Configuration Task Collection............................................................................................... 357

9.1 Configuring an Ethernet Port..........................................................................................................................3609.1.1 Setting the General Attributes of Ethernet Interfaces............................................................................3619.1.2 Setting the Layer 2 Attributes of Ethernet Ports....................................................................................3629.1.3 Setting the Layer 3 Attributes of Ethernet Ports....................................................................................3629.1.4 Setting the Advanced Attributes of Ethernet Ports................................................................................3639.1.5 Configuring the Flow Control...............................................................................................................363

9.2 Configuring CES Ports...................................................................................................................................3649.2.1 Configuring Channelized STM-1 Ports.................................................................................................3649.2.2 Configuring E1 Ports.............................................................................................................................365

9.3 Configuring the NNIs.....................................................................................................................................3669.3.1 Configuring the NNIs for Ethernet Services Carried by Ports..............................................................3669.3.2 Configuring the NNIs for Ethernet Services Carried by Static MPLS Tunnels....................................3679.3.3 Configuring the NNIs for Ethernet Services Carried by QinQ Links...................................................368

9.4 Configuring an MPLS Tunnel........................................................................................................................3699.4.1 Configuring LSR ID..............................................................................................................................3699.4.2 Configuring an MPLS Tunnel on a Per-NE Basis.................................................................................370

9.4.2.1 Configuring a Unidirectional Static MPLS Tunnel on a Per-NE Basis.......................................3709.4.2.2 Configuring a Bidirectional Static MPLS Tunnel on a Per-NE Basis..........................................372

9.4.3 Configuring an MPLS Tunnel in an End-to-End Mode........................................................................3739.4.3.1 Configuring a Static and Unidirectional MPLS Tunnel in End-to-End Mode.............................3749.4.3.2 Configuring a Static and Bidirectional MPLS Tunnel in End-to-End Mode...............................376

9.5 Managing MPLS Tunnels...............................................................................................................................3789.5.1 Searching for MPLS Tunnels................................................................................................................3799.5.2 Checking the MPLS Tunnel Topology..................................................................................................3799.5.3 Duplicating MPLS Tunnels...................................................................................................................3809.5.4 Deploying MPLS Tunnels.....................................................................................................................3819.5.5 Deleting MPLS Tunnels........................................................................................................................3829.5.6 Managing Discrete MPLS Tunnels.......................................................................................................383

9.6 Configuring MPLS OAM...............................................................................................................................3839.6.1 Configuring the MPLS OAM on a Per-NE Basis..................................................................................3839.6.2 Configuring MPLS OAM in End-to-End Mode....................................................................................386

9.7 Configuring MPLS Tunnel APS.....................................................................................................................3889.7.1 Configuring MPLS Tunnel APS on a Per-NE Basis.............................................................................3899.7.2 Configuring an MPLS Tunnel APS in End-to-End Mode.....................................................................390

9.8 Managing MPLS Tunnel APS Protection Groups..........................................................................................3929.8.1 Automatically Discovering Protection Groups......................................................................................3929.8.2 Deploying MPLS Tunnel APS Protection Groups................................................................................3939.8.3 Ranaming an MPLS Tunnel APS Protection Group.............................................................................3939.8.4 Deleting MPLS Tunnel APS Protection Groups...................................................................................394

9.9 Operation Tasks for Configuring E-Line Services.........................................................................................395



xi

9.9.1 Configuring UNI-UNI E-Line Services................................................................................................3959.9.2 Configuring UNI-NNI E-Line Services Carried by Ports.....................................................................3979.9.3 Configuring UNI-NNI E-Line Services Carried by PWs on a Per-NE Basis........................................3989.9.4 Configuring E-Line Services Carried by PWs in End-to-End Mode....................................................4009.9.5 Creating UNI-NNI E-Line Services Carried by QinQ Links................................................................402

9.10 Operation Task for Configuring E-LAN Services........................................................................................4039.10.1 Configuring E-LAN Services Carried by Ports...................................................................................4049.10.2 Creating E-LAN Services Carried by PWs on a Per-NE Basis...........................................................4069.10.3 Configuring E-LAN Services Carried by PWs in End-to-End Mode.................................................4089.10.4 Configuring E-LAN Services Carried by QinQ Links........................................................................410

9.11 Configuring E-AGGR Services....................................................................................................................4139.11.1 Configuring E-AGGR Services Carried by Ports................................................................................4139.11.2 Creating E-AGGR Services Carried by PWs on a Per-NE Basis........................................................4149.11.3 Creating E-AGGR Services Carried by PWs in End-to-End Mode....................................................416

9.12 Configuring Transit Nodes for Ethernet Services........................................................................................4189.12.1 Configuring Transit NEs for Ethernet Services Carried by Ports........................................................4189.12.2 Configuring Transit NEs for Ethernet Services Carried by PWs........................................................4199.12.3 Configuring Transit NEs for Ethernet Services Carried by QinQ Links.............................................420

9.13 Operation Tasks for Configuring CES Services...........................................................................................4219.13.1 Creating UNI-UNI CES Services on a Per-NE Basis..........................................................................4219.13.2 Creating UNI-NNI CES Services on a Per-NE Basis..........................................................................4229.13.3 Creating a CES Service in End-to-End Mode.....................................................................................424

9.14 Configuring Transit NEs for CES Services..................................................................................................4289.15 Configuring ATM PWE3 Services...............................................................................................................428

9.15.1 Configuring ATM Interfaces...............................................................................................................4289.15.2 Configuring an ATM Policy Profile....................................................................................................4339.15.3 Configuring an ATM CoS Mapping Profile........................................................................................4349.15.4 Creating an ATM Service by Using the Trail Function......................................................................4369.15.5 Creating ATM Services on a Per-NE Basis.........................................................................................438

9.16 Managing PWE3 Services............................................................................................................................4419.16.1 Searching for PWE3 Services..............................................................................................................4429.16.2 Checking the PWE3 Service Status.....................................................................................................4429.16.3 Deploying PWE3 Services..................................................................................................................4439.16.4 Modifying PWE3 Services..................................................................................................................4449.16.5 Deleting PWE3 Services.....................................................................................................................4459.16.6 Managing Discrete PWE3 Services.....................................................................................................445

9.17 Managing Composite Services.....................................................................................................................4469.17.1 Automatically Discovering Composite Services.................................................................................4469.17.2 Deploying Composite Services...........................................................................................................447

9.18 Configuring Address Resolution..................................................................................................................4489.19 Configuring the NE-Level TPID..................................................................................................................4499.20 Creating a QinQ Link...................................................................................................................................449



xii

9.21 Creating a V-UNI Group..............................................................................................................................4509.22 Managing the Blacklist.................................................................................................................................451

10 Parameter Description............................................................................................................45310.1 Parameter Description: Attributes of Ethernet Interface .............................................................................455

10.1.1 General Attributes................................................................................................................................45510.1.2 Flow Control........................................................................................................................................45610.1.3 Layer 2 Attributes................................................................................................................................45910.1.4 Layer 3 Attributes................................................................................................................................46110.1.5 Advanced Attributes............................................................................................................................462

10.2 Parameter Description: MPLS......................................................................................................................46410.2.1 Basic Configuration.............................................................................................................................46410.2.2 Parameters for Configuring a Static Tunnel (on a Per-NE Basis).......................................................46410.2.3 Parameters for Configuring a Static Tunnel (End-to-End Mode).......................................................469

10.3 Parameter Description: E-Line Service........................................................................................................47610.3.1 E-Line Service Parameters (Configuration on a Per-NE Basis)..........................................................47610.3.2 E-Line Service Parameters (Configuration in End-to-End Mode)......................................................47810.3.3 UNI Parameters...................................................................................................................................48910.3.4 NNI Parameters...................................................................................................................................49010.3.5 Maintenance Association.....................................................................................................................49310.3.6 MEP Point............................................................................................................................................494

10.4 Parameter Description: E-LAN Service.......................................................................................................49510.4.1 E-LAN Service Parameters (Configuration on a Per-NE Basis).........................................................49510.4.2 E-LAN Service Parameters (Configuration in End-to-End Mode).....................................................49610.4.3 UNI Parameters...................................................................................................................................50710.4.4 NNI Parameters...................................................................................................................................50810.4.5 Split Horizon Group............................................................................................................................51210.4.6 MAC Address Learning Parameters....................................................................................................51210.4.7 Unknown Frame Processing................................................................................................................51310.4.8 Static MAC Address............................................................................................................................51410.4.9 Maintenance Association.....................................................................................................................51410.4.10 MEP Point..........................................................................................................................................51510.4.11 V-UNI Group.....................................................................................................................................516

10.5 Parameter Description: E-AGGR Service....................................................................................................51710.5.1 E-AGGR Service Parameters (on a Per-NE Basis).............................................................................51710.5.2 Parameters for Configuring E-AGGR Services (End-to-End Mode)..................................................51710.5.3 UNI Parameters...................................................................................................................................52210.5.4 NNI Parameters...................................................................................................................................52310.5.5 VLAN Forwarding Table Item............................................................................................................52610.5.6 Maintenance Association.....................................................................................................................52710.5.7 MEP Point............................................................................................................................................528

10.6 Parameter Description: CES Port.................................................................................................................52810.6.1 Channelized STM-1 Port.....................................................................................................................528



xiii

10.6.2 E1 Port.................................................................................................................................................53210.7 Parameter Description: CES Services..........................................................................................................535

10.7.1 Basic Configuration Parameters (UNI-UNI).......................................................................................53510.7.2 Basic Configuration Parameters (UNI-NNI).......................................................................................53610.7.3 QoS (UNI-NNI)...................................................................................................................................53910.7.4 Advanced Attributes (UNI-NNI).........................................................................................................54010.7.5 Parameters for Configuring CES Services (End-to-End Mode)..........................................................544

10.8 Parameter Description: ATM/IMA Services................................................................................................54710.8.1 Creating an ATM Service....................................................................................................................54710.8.2 Connection...........................................................................................................................................54910.8.3 CoS Mapping.......................................................................................................................................55210.8.4 Configuring an ATM Service Class Mapping Table...........................................................................55210.8.5 ATM Policies.......................................................................................................................................55310.8.6 SDH Interface......................................................................................................................................55910.8.7 IMA Group Management....................................................................................................................562

10.9 Parameter Description: MPLS OAM...........................................................................................................56710.9.1 Tunnel OAM Parameters.....................................................................................................................56710.9.2 Ping Test..............................................................................................................................................57010.9.3 Traceroute Test....................................................................................................................................570

10.10 Parameter Description: MPLS Tunnel APS...............................................................................................57110.10.1 Parameters for Configuring MPLS Tunnel APS (on a Per-NE Basis)..............................................57110.10.2 Parameters for Configuring MPLS Tunnel APS (in End-to-End Mode)..........................................572

10.11 Parameter Description: Inband DCN..........................................................................................................57510.11.1 Port Settings.......................................................................................................................................57510.11.2 Access Control...................................................................................................................................57610.11.3 Bandwidth Management....................................................................................................................577

10.12 Parameter Description: QinQ Link Configuration Parameters...................................................................57710.13 Parameter Description: Address Parse.......................................................................................................579

A List of Parameters.....................................................................................................................580A.1 Ethernet Port Associated Parameters (Packet Mode)....................................................................................582

A.1.1 MAC Loopback(Ethernet Interface).....................................................................................................582A.1.2 PHY Loopback(Ethernet Interface)......................................................................................................583A.1.3 Enable Port(Ethernet Interface)............................................................................................................584A.1.4 Encapsulation Type(Ethernet Interface)...............................................................................................585A.1.5 Working Mode(Ethernet Interface)......................................................................................................586A.1.6 Max Frame Length(byte) for an Ethernet Port.....................................................................................587A.1.7 Enable Tunnel(Ethernet Interface)........................................................................................................588A.1.8 Specify IP(Ethernet Interface)..............................................................................................................589

A.2 Ethernet Port Associated Parameters (TDM Mode)......................................................................................590A.2.1 Port Attribute (Ethernet Port)...............................................................................................................590A.2.2 Enable Port (Ethernet Port Attribute)...................................................................................................592A.2.3 Max. Frame Length (Ethernet Port Attribute)......................................................................................592



xiv

A.2.4 Non-Autonegotiation Flow Control Mode (Ethernet Port Attribute)...................................................593A.2.5 Autonegotiation Flow Control Mode (Ethernet Port Attribute)...........................................................594A.2.6 MAC Loopback (Ethernet Port Attribute)............................................................................................595A.2.7 PHY Loopback (Ethernet Port Attribute).............................................................................................596A.2.8 QinQ Type Area...................................................................................................................................597A.2.9 Loop Detection (Ethernet Port Attribute).............................................................................................598A.2.10 Loop Port Shutdown (Ethernet Port Attribute)...................................................................................598A.2.11 Traffic Threshold(Mpbs)(External Ethernet Port Attribute)..............................................................599A.2.12 Broadcast Packet Suppression Threshold (Ethernet Interface Attributes)..........................................599A.2.13 Enabling Broadcast Packet Suppression (Ethernet Interface Attributes)...........................................600A.2.14 Zero-Flow Monitor (Ethernet Interface Attributes)............................................................................601A.2.15 Port Traffic Threshold Time Window(Min).......................................................................................601A.2.16 Jumbo Frame Type.............................................................................................................................602A.2.17 Default VLAN ID (Ethernet Port Attribute).......................................................................................603A.2.18 VLAN Priority (Ethernet Port Attribute)............................................................................................603A.2.19 Entry Detection (Ethernet Port Attribute)...........................................................................................604A.2.20 Tag Identifier......................................................................................................................................605A.2.21 Mapping Protocol...............................................................................................................................606A.2.22 Scramble.............................................................................................................................................608A.2.23 Set Inverse Value for CRC.................................................................................................................609A.2.24 Check Field Length.............................................................................................................................609A.2.25 FCS Calculated Bit Sequence.............................................................................................................610A.2.26 Extension Header Option....................................................................................................................612

A.3 Ethernet Service Associated Parameters (Packet Mode)...............................................................................613A.3.1 PW Signaling Type(PW Management)................................................................................................613A.3.2 Bearer Type (E-Line Service)...............................................................................................................614A.3.3 PW ID(E-Line Service)........................................................................................................................614A.3.4 BPDU....................................................................................................................................................615A.3.5 MTU(bytes)(E-Line Service)................................................................................................................616A.3.6 Static MAC Address (E-LAN Service)................................................................................................617A.3.7 Self-Learning MAC Address (E-LAN Service)...................................................................................618A.3.8 Aging Time (min)(E-LAN Service).....................................................................................................619A.3.9 Default Forwarding Priority.................................................................................................................620A.3.10 Default Packet Relabeling Color(E-LAN Service).............................................................................621A.3.11 Split Horizon Group ID(E-LAN Service)...........................................................................................622A.3.12 Split Horizon Group Member (E-LAN Service)................................................................................623A.3.13 Source Interface Type(E-AGGR Service)..........................................................................................623A.3.14 Sink Interface Type(E-AGGR Service)..............................................................................................624

A.4 CES Service Associated Parameters..............................................................................................................625A.4.1 Packet Loading Time (us).....................................................................................................................625A.4.2 RTP Header..........................................................................................................................................626A.4.3 Jitter Compensation Buffering Time (us).............................................................................................627



xv

A.4.4 Clock Mode..........................................................................................................................................629A.5 Data Service Associated Parameters (TDM Mode).......................................................................................630

A.5.1 Operation Type (EPL Service).............................................................................................................630A.5.2 Service Type (EPL Service).................................................................................................................632A.5.3 Encapsulation Format of P Port (Network Attributes).........................................................................633A.5.4 C-VLAN and S-VLAN.........................................................................................................................634A.5.5 VLAN ID (For Creation of Ethernet Virtual Private Lines).................................................................635A.5.6 MAC Address Aging Time / Aging Time Unit....................................................................................636A.5.7 Hub/Spoke (Ethernet LAN Service).....................................................................................................637A.5.8 Actual MAC Address Table Capacity (Ethernet LAN Service)...........................................................637A.5.9 Specified MAC Address Table Capacity (Ethernet LAN Service)......................................................638A.5.10 Bridge Learning Mode (Ethernet LAN Service)................................................................................640A.5.11 Self-learning MAC Address (Ethernet LAN Service)........................................................................641A.5.12 Tunnel.................................................................................................................................................641A.5.13 VC.......................................................................................................................................................642A.5.14 Operation Type(IEEE 802.1ad Bridge)..............................................................................................643A.5.15 Bridge Type........................................................................................................................................644A.5.16 SAN Service Type..............................................................................................................................645A.5.17 Concatenation Level (SAN)...............................................................................................................646A.5.18 Enabled Flow Control of FC Port.......................................................................................................646A.5.19 Initial Value of CREDIT at the Client Side........................................................................................647A.5.20 Initial Value of CREDIT at the WAN Side........................................................................................648

A.6 ETH OAM Associated Parameters (Packet Mode).......................................................................................649A.6.1 CC Test Transmit Period(Ethernet Service OAM Management).........................................................649A.6.2 Maintenance Domain Level(Ethernet Service OAM Management)....................................................650A.6.3 CC Status(Ethernet Service OAM Management).................................................................................651A.6.4 Service Name(Ethernet Service OAM Management)..........................................................................651A.6.5 Service Type(Ethernet Service OAM Management)............................................................................652A.6.6 Activation Status(Ethernet Service OAM Management).....................................................................653A.6.7 Transmitted Packet Count(Ethernet Service OAM Management).......................................................654A.6.8 Transmitted Packet Length(Ethernet Service OAM Management)......................................................655A.6.9 Transmitted Packet Priority (Ethernet Service OAM Management)....................................................655A.6.10 Destination Maintenance Point MAC Address(Ethernet Service OAM Management).....................656A.6.11 Response Maintenance Point ID(Ethernet Service OAM Management)...........................................656A.6.12 Hop Count(Ethernet Service OAM Management).............................................................................657A.6.13 Test Result(Ethernet Service OAM Management).............................................................................658

A.7 ETH-OAM Associated Parameters (TDM Mode).........................................................................................658A.7.1 MP ID (Ethernet OAM)........................................................................................................................658A.7.2 Maintenance Point Type (Ethernet OAM)...........................................................................................659A.7.3 CC Status (Ethernet OAM)...................................................................................................................660A.7.4 CC Activate Flag..................................................................................................................................660A.7.5 Test Result (LB and LT Test)...............................................................................................................661



xvi

A.7.6 Responding MP Type (Ethernet LT Test)............................................................................................662A.7.7 Hop Count (Ethernet LT Test)..............................................................................................................662A.7.8 Send Mode (Ping Test).........................................................................................................................663A.7.9 Packet Length (Ping Test)....................................................................................................................664A.7.10 Timeout (Ping Test)............................................................................................................................664A.7.11 Time To Live......................................................................................................................................665A.7.12 Delay...................................................................................................................................................665A.7.13 Average Delay....................................................................................................................................666A.7.14 Max. Delay.........................................................................................................................................666A.7.15 Min. Delay..........................................................................................................................................667A.7.16 Detect Attempts..................................................................................................................................667A.7.17 Send Direction (Ethernet Test)...........................................................................................................668A.7.18 Error Frame Monitor Window(ms)....................................................................................................669A.7.19 Error Frame Monitor Threshold (Entries)..........................................................................................669A.7.20 Error Frame Period Window (Frame).................................................................................................670A.7.21 Error Frame Monitor Threshold (Frame)...........................................................................................671A.7.22 Error Frame Second Window(s).........................................................................................................671A.7.23 Error Frame Second Threshold(s)......................................................................................................672A.7.24 Enable OAM Protocol........................................................................................................................673A.7.25 OAM Working Mode.........................................................................................................................673A.7.26 Remote Alarm Support for Link Event..............................................................................................674A.7.27 Unidirectional Operation....................................................................................................................674A.7.28 Loopback Status (OAM Parameter)...................................................................................................675

A.8 PW Associated Parameters............................................................................................................................676A.8.1 Control Word........................................................................................................................................676A.8.2 Control Channel Type...........................................................................................................................677A.8.3 VCCV Verification Mode.....................................................................................................................678A.8.4 Request VLAN.....................................................................................................................................679A.8.5 Competitive Working Status.................................................................................................................680A.8.6 Associate AC State...............................................................................................................................681A.8.7 Max.Concatenated Cell Count..............................................................................................................681

A.9 PW APS Protection Associated Parameters (Packet Mode)..........................................................................682A.9.1 Protection Mode....................................................................................................................................682A.9.2 Protection Mode....................................................................................................................................683A.9.3 Switchover Status.................................................................................................................................684A.9.4 Protocol Status......................................................................................................................................687A.9.5 PW Type...............................................................................................................................................688

A.10 HQoS Associated Parameters......................................................................................................................689A.10.1 Traffic Classification Rule(Policy Management)...............................................................................689A.10.2 Match Type(Policy Management)......................................................................................................690A.10.3 Match Value(Policy Management).....................................................................................................693A.10.4 Wildcard(Policy Management)...........................................................................................................695



xvii

A.10.5 PW Direction(PW Policy)..................................................................................................................698A.10.6 Direction (PW Policy)........................................................................................................................698A.10.7 Duplicated Policy Name(PW Policy).................................................................................................699A.10.8 Policy ID(Policy Management)..........................................................................................................699A.10.9 Policy Name (Policy Management)....................................................................................................700A.10.10 QinQ Link ID(QinQ Policy).............................................................................................................701A.10.11 Physical Port ID(QinQ Policy).........................................................................................................701A.10.12 S-VLAN ID(QinQ Policy)................................................................................................................701A.10.13 Traffic Classification Bandwidth Sharing(Policy Management)......................................................702A.10.14 Coloring Mode (V-UNI Ingress Policy)...........................................................................................703A.10.15 Logical Relation Between Matched Rules(V-UNI Ingress Policy)..................................................704A.10.16 Processing Mode(V-UNI Ingress Policy).........................................................................................705A.10.17 AF1 Schedule Weight(%)(WFQ Schedule Policy)..........................................................................706A.10.18 AF2 Schedule Weight(%)(WFQ Schedule Policy)..........................................................................706A.10.19 AF3 Schedule Weight(%)(WFQ Schedule Policy)..........................................................................707A.10.20 AF4 Schedule Weight(%)(WFQ Schedule Policy)..........................................................................708A.10.21 Discard Lower Threshold (256 bytes) (Service WRED Policy).......................................................708A.10.22 Discard Upper Threshold (256 bytes) (Service WRED Policy).......................................................709A.10.23 Discard Probability (%) (Service WRED Policy)............................................................................710A.10.24 PHB (Diffserv domain Management)...............................................................................................710A.10.25 Packet Type (Diffserv domain Management)...................................................................................711A.10.26 Committed Information Rate (Kbit/s)..............................................................................................712A.10.27 Committed Burst Size (byte)............................................................................................................713A.10.28 Peak Information Rate (kbit/s)..........................................................................................................713A.10.29 Peak Burst Size (byte)......................................................................................................................714A.10.30 EXP...................................................................................................................................................715A.10.31 LSP Mode.........................................................................................................................................716

A.11 QoS Associated Parameters.........................................................................................................................717A.11.1 Flow Type (Flow Configuration)........................................................................................................717A.11.2 Bound CAR (Flow Configuration).....................................................................................................718A.11.3 Bound CoS (Flow Configuration)......................................................................................................719A.11.4 CAR ID (CAR Configuration)............................................................................................................719A.11.5 CAR Enabled/Disabled (CAR Configuration)...................................................................................720A.11.6 Committed Information Rate (CAR Configuration)...........................................................................721A.11.7 Committed Burst Size (CAR Configuration).....................................................................................722A.11.8 Peak Information Rate (CAR Configuration).....................................................................................722A.11.9 Maximum Burst Size (CAR Configuration).......................................................................................723A.11.10 CoS ID (CoS Configuration)............................................................................................................724A.11.11 CoS Type (CoS Configuration)........................................................................................................725A.11.12 CoS Priority (CoS Configuration)....................................................................................................726A.11.13 Shaping.............................................................................................................................................729

A.12 ATM Interface Associated Parameters (Packet Mode)...............................................................................730



xviii

A.12.1 ATM Cell Payload Scrambling(ATM Interface Management)..........................................................730A.12.2 Min.VPI(ATM Interface Management)..............................................................................................731A.12.3 Min.VCI(ATM Interface Management).............................................................................................732A.12.4 VCC-Supported VPI Count(ATM Interface Management)................................................................733

A.13 ATM/IMA Services Associated Parameters (Packet Mode).......................................................................734A.13.1 IMA Transit Frame Length.................................................................................................................734A.13.2 IMA Symmetry Mode.........................................................................................................................735A.13.3 Maximum Delay Between Links(ms)(IMA Group Management).....................................................736A.13.4 Minimum Number of Active Transmitting Links(IMA Group Management)...................................737A.13.5 Minimum Number of Active Receiving Links(IMA Group Management).......................................738A.13.6 Clock Mode(IMA Group Management).............................................................................................739A.13.7 Near-End Group Status(IMA Group Status)......................................................................................740A.13.8 Differential Delay Check Status(IMA Link States)............................................................................741A.13.9 Connection Type(Per-NE ATM Service Management).....................................................................742A.13.10 Uplink Policy(Per-NE Configuration for ATM Connections).........................................................743A.13.11 Downlink Policy(Per-NE Configuration for ATM Connections)....................................................744A.13.12 CoS Mapping(Per-NE Configuration for CoS Mapping).................................................................745A.13.13 Traffic Service(ATM Policy)...........................................................................................................745A.13.14 Clp01Pcr(cell/s)(ATM Policy).........................................................................................................749A.13.15 Clp01Scr(cell/s)(ATM Policy).........................................................................................................751A.13.16 Clp0Pcr(cell/s)(ATM Policy)...........................................................................................................753A.13.17 Clp0Scr(cell/s)(ATM Policy)...........................................................................................................755A.13.18 Clp01Mcr(cell/s)(ATM Policy)........................................................................................................757A.13.19 Max.Cell Burst Size(cell)(ATM Policy)...........................................................................................759A.13.20 Cell Delay Variation Tolerance(0.1us)(ATM Policy)......................................................................760A.13.21 UPC/NPC(ATM Policy)...................................................................................................................762

A.14 ATM OAM Associated Parameters (Packet Mode)....................................................................................763A.14.1 Connection Direction..........................................................................................................................763A.14.2 Segment and End Attribute.................................................................................................................764A.14.3 Country Code(Hexadecimal Code).....................................................................................................766A.14.4 Network Code(Hexadecimal Code)....................................................................................................767A.14.5 NE Code(Hexadecimal Code)............................................................................................................768

A.15 ATM/IMA Associated Parameters (TDM Mode).......................................................................................769A.15.1 VCTRUNK Port (ATM Bound Path Management)...........................................................................769A.15.2 Level (ATM Bound Path Management).............................................................................................772A.15.3 Direction (ATM Bound Path Management)......................................................................................

Date post:	22-Nov-2015
Category:	Documents
Upload:	thunder-linkcom
View:	369 times
Download:	30 times

OptiX OSN 7500 II&7500&3500&1500 Configuration Guide (Packet Transport Domain)(V200R011)

Documents