Orbis Anti-Ligature

www.laidlaw.net

www.laidlaw.net

UniclassL4181

CI/SfB

(31.5) X

EpicD181

Orbis Anti-Ligature Range

www.laidlaw.net

1 www.laidlaw.net

THE LAIDLAW SERVICE

Laidlaw is the leading specifier, distributor and technical service provider of architectural ironmongery, doorsets, handrail & balustrades and access control solutions to the UK construction industry. Laidlaw is able to offer a wide range of architectural products that combine design and function across a broad band of product categories. This is achieved by working closely with manufacturing partners ensuring consistent quality and performance are achieved from the products offered and by keeping up to date with market requirements and technical specifications to ensure Laidlaw remains at the forefront of the markets it serves.

In addition to the renowned Orbis brand the Laidlaw portfolio also incorporates specialist product areas such as Electronic Access Control and Anti-Ligature fittings. Laidlaw is also able to offer a comprehensive system of Orbis Doorsets which are fully compatible with the Orbis range of architectural hardware.

For further information on any of the Laidlaw products and services, please refer to the full range of product brochures or alternatively call one of the Laidlaw branches nationwide as listed on the back page of this brochure.

Specification AdviceLaidlaw's team of GAI trained consultants is available to assist with all of the detailed product enquiries associated with the increasingly complex subject of hardware specification. Whether it be advice on product compliance for Disability Discrimination Act (DDA) applications or test certification for fire door applications, your local Laidlaw Technical Consultant is always on hand to guide you to the most appropriate specification.

Working in PartnershipLaidlaw is committed to providing exceptional levels of support at all stages of a project by understanding and demonstrating the true values of a cohesive, integrated supply chain.

Product DevelopmentAll products are subject to continual design and manufacturing development in order to improve performance or to meet the changing demands of standards, testing or other building legislation.

Project ManagementHaving provided guidance in the specification and selection of appropriate products, Laidlaw's scheduling team will produce fully detailed, door by door ironmongery schedules along with a full bill of materials. Laidlaw will then project manage the supply of product including the manufacture of special or bespoke items; supply of relevant installation drawings; and, where necessary, certification and delivery schedules.

CPD seminarsLaidlaw is a RIBA approved provider of CPD seminars and is able to offer specifiers seminars and workshops on a wide range of hardware related subjects including DDA, Doc M and BS 8300 compliance.

Packaging and DeliveryLaidlaw will work alongside the customer's project management team to ensure the product arrives on site in the most appropriate form. This could include labelling to the architect's door numbers, or already installed on Orbis Timber or Integra Doors. Laidlaw will ensure deliveries are made in full and on time.

2 www.laidlaw.net

www.laidlaw.net

THE LAIDLAW SERVICE 1

ORBIS ANTI-LIGATURE - INTRODUCTION 3 - 4

ORBIS ANTI-LIGATURE - FEATURES & INSTALLATION 5 - 7

CASE STUDY 8

KNOB SETS 9

LEVER SETS 10

CYLINDERS & THUMBTURNS 11

CYLINDER ESCUTCHEONS 12

PRIMARY & SECONDARY BARRICADE PROTECTION 13 - 16

DOOR PULL HANDLES 17 - 18

BATHROOM TURNS 19

MORTICE LOCKCASES 19 - 20

ANTI-LIGATURE HINGES 21

DOOR STOPS & EMERGENCY RELEASE 22

PIVOT SETS AND FLOOR SPRING 23

ACCESSORIES 24

WINDOW FITTINGS 25

TECHNICAL ADVICE 26

ORBIS ANTI-LIGATURE – CONTENTS

www.laidlaw.net

3 www.laidlaw.net

ORBIS ANTI-LIGATURE – INTRODUCTION

Reducing the risk of suicide by hanging

The most recent studies show that suicide rates by hanging and suffocation have steadily increased since 1981 and are now the most prevalent methods of all suicides, accounting for 40% of the total figure(1). Research indicates that removing or reducing easy access to lethal methods of self harm is an effective way of preventing suicide.

Throughout the UK, there are various initiatives to reduce this figure. In England, the target is a reduction of 20% by 2010; in Scotland the target is 20% by 2013.

Approximately one quarter of suicide victims in England, Wales, Scotland and Northern Ireland had been in contact with mental health services in the year before death; this represents around 1,500 cases per year.

In the report of the National Confidential Enquiry into Suicide(2), a number of recommendations were made in its ‘twelve points to a safer service’ including; ‘In-patient wards to remove or cover all likely ligature points, including all non-collapsible curtain rails’.

References(1) National Suicide Prevention Strategy for England, Annual Report on Progress 2003 – Dec 2003.(2) SAFETY FIRST, Five-year Report of the National Confidential Inquiry into Suicide and Homicide by People with

Mental Illness - March 2001.

What is anti-ligature ironmongery?An anti-ligature product is one from which it is not possible for a ligature to remain secured. The purpose is to deny individuals the opportunity to use the hardware as a means of attaching a ligature for the purpose of inflicting harm to themselves or others.

DHF Technical Specification TS 001

In spite of the growing importance of this area of architectural ironmongery specification, there remains very little guidance or legislation to assist manufacturers or specifiers.

A specification document, entitled Door Mounted Anti-Ligature Devices for Safety and Security Purposes, has been published by the Door & Hardware Federation in response to the growing need for this type of product. It includes a proposed classification of anti-ligature devices, test methods and grades of safety. Up to now, the tests have been mainly applied to hinges.

Where applicable Orbis Anti-Ligature hardware conforms to the recommendations contained within the DHF document.

www.laidlaw.net

4 www.laidlaw.net

The Laidlaw Orbis Anti-Ligature Range

As a result of these recommendations, Laidlaw have introduced an innovative and broad-ranging group of anti-ligature door furniture, door closing and access devices that can be selected in a variety of combinations, depending on the level of security required.However, Laidlaw cannot guarantee that there will be no circumstances in which self-harm is possible.

Creating a safe, yet sympathetic environment.

Laidlaw’s sympathetic designs include soft, rounded shapes that reduce the ligature points in a room whilst avoiding an institutional look. This makes the products particularly suitable for use in detention centres, young offenders institutions, hospitals, immigration centres and care centres, while providing the high security necessary in prisons, courts and mental health institutions.

Within the Orbis Anti-Ligature range we have a wide selection of products providing specifiers with a choice of styles and operating characteristics. Our door operating hardware solutions include a series of Locksets (as per examples above) which have been developed as a suite suitable for specific types of applications.

ORBIS ANTI-LIGATURE – INTRODUCTION

10 YEARGUARANTEE

Unless shown otherwise, all Laidlaw Orbis Anti-ligature products are subject to a 10 year guarantee against defects proved to be the result of faulty manufacture or defective materials

www.laidlaw.net

5 www.laidlaw.net

ORBIS ANTI-LIGATURE – FEATURES & INSTALLATION

BS EN Performance standard Certain of the products within the Anti-ligature range have been developed specifically to meet or exceed the latest European Standards.

CE Marking Where CE marking is permitted, items are marked with the CE icon. The CE classification is indicated against each item where this is appropriate.

Testing Fire testing is an ongoing process with Laidlaw.

Many of the Anti-ligature hardware items have been included in tests on timber fire doors up to 2 hours and on steel fire doors up to 4 hours. The icon indicates the item has been successfully included in fire tests.

DimensionsAll dimensions shown throughout this brochure are in mm.

Laidlaw Orbis Anti-Ligature doorknob set

The Laidlaw Anti-ligature doorknob set is designed for use on either standard mortice lockcases with centres of 72mm (or above). The key benefits of the knobset range are:

Lockcase with stainless steel Grade 316 forend with radiused end

Corrosion resistant chrome plated latch bolt reversible for left and right hand applications without the need to dismantle the lockcase

Finger grooves on knob to ensure easy operation

A special low-resistance yet durable spring is used to ensure that the knob is easier to turn than would be the case with a standard lockcase

The deadbolt can be thrown and withdrawn from one or both sides as required depending on the cylinder selected. The cylinder to latch function enables the cylinder to withdraw the double throw deadbolt on the second turn of the cylinder and the latchbolt on the third turn, helping to ensure access

Cylinder cloaked by escutcheon

All escutcheons and roses have a bevelled edge

An anti-barricade cylinder ensures that key operation is always possible even if the occupant

attempts to hold the thumbturn

F

G

H

E

D

B

C

AA

B

C

F

D

E

G

H

Materials and finishes

Laidlaw Orbis Anti-Ligature door furniture is made generally in Stainless Steel grade 316 or aluminium. However, for some finishes, only one option is available. The two finishes are referred to as – Satin Stainless Steel (SS7) or Silk Anodised Aluminium (SA7).

SS7 Satin Stainless Steel

SA7 Silk Anodised Aluminium

www.laidlaw.net

6 www.laidlaw.net


The importance of door thickness

The fundamental difference between anti ligature door hardware and standard door operating hardware is the importance of the door thickness. In a standard door hardware installation, the hardware will accommodate relatively large variations in door thickness using a standard spindle and fixings.

In contrast, an anti ligature hardware set-up is less flexible as projections must be more strictly controlled and as a consequence hardware assemblies must be specified to suit a specific door thickness.

Laidlaw anti-ligature knob set shows how the knob, rose and spindle are a fixed assembly on the inside face. Any adjustment for door thickness is only accommodated on the outside (staff side) knob.

Specifying products

When specifying door operating products from the catalogue there are a number of aspects to consider;

• Specifythecorrectmodelnumberaccordingtothe door thickness quoted. Specifying the correct door thickness is critical to achieving a correct installation

• WithKnobsetsandLeversetsremembertospecifyan appropriate lockcase and cylinder

• Remembertospecifythefinishcodeaftertheitem number - eg, 50.AL8.6SS7

www.laidlaw.net

7 www.laidlaw.net


Laidlaw Orbis Anti-Ligature Locksets

The Laidlaw Anti-ligature Locksets are designed as co-ordinated sets comprising the internal and external operating hardware and the mortice lock. The main features are:

Full range of lockcase functions including rollerbolt locks with stainless steel forend

Corrosion resistant chrome plated roller bolt catch suitable for both single and double action doors

Available in single plate (Primary Barricade Over-ride) or two plate (Secondary Barricade Over-ride) options according to application

Specially designed internal operating hardware has a smooth rotary action

Cylinder cloaked by escutcheon

All escutcheons and roses have a bevelled edge

Standard cylinders can be used as the unique, patented lockcase ensures that the key will always dominate the internal handle providing staff access at all times

Robust back to back assembly

All fixings are included and supplied in the tamper proof Torx Pin format

F

G

H

E

D

B

C

A

II

F

G

H

E

DB

C

A

D

The Orbis Timber Doorset solution

The Laidlaw Orbis Anti-Ligature range is ideally integrated with Orbis Timber Doorsets. This allows doors and frames to be precisely machined to suit the hardware, thereby improving performance and consequently the durability and efficiency of the hardware. In addition, it allows doors, frames, architraves and factory-fitted ironmongery to be supplied from one source, ensuring on-site fitting of hardware is kept to a minimum, improving the finished quality of the installation and reducing the risk of on-site damage.

To obtain a copy of the Orbis Timber Doorsets brochure please ring the Timber Doorsets enquiry line on: 01902 600 487.

www.laidlaw.net

8 www.laidlaw.net

ORBIS ANTI-LIGATURE – CASE STUDY

Project: Newtown Hospital Worcester - Hadley PICU

Client: Worcestershire NHS Mental Health Partnership

Design team: The Design Büro – lead Helen Whinray

The project challenge was to design a high quality healing environment with a suitably robust envelope within the existing building fabric, ensuring that the therapeutic and operational environment was not compromised. The highly detailed interior involved the existing shell being entirely stripped out, ceiling heights raised, rooms widened and openings formed in order for break out spaces to be created. Blind spots were also eliminated to improve visibility throughout the unit.

63 Laminated Orbis Doorsets were supplied in Bio Oak, with frames, door lippings and glazing beads in American White Oak. As a psychiatric intensive care unit, anti-ligature door hardware was a key element of the specification and Orbis Knob Sets, Finger Grip Pull Handles and Lock Escutcheons, all in Silk Anodised Aluminium, met the required standards for lightly sprung lock cases and tamper-proof fixings. Other doors were fitted with electro-magnetic door operation to comply with fire safety, DDA and Approved Document M requirements, and with glazing in which key-operable louvre vision panels were fitted.

With its extensive experience of mental health interior design commissions as well as many others in traditional medical care, the Design Büro worked closely with Laidlaw Solutions to provide a variety of product solutions.

www.laidlaw.net

9 www.laidlaw.net

KNOB SETS

63 75

63 75.5

1263

• Fingergroovesaidgriponknob• Easytoturnwhenusedin

conjunction with a lightly sprung lockcase

• Suppliedcompletewithspindleand back-to-back fixings

• Novisiblefixingsontheclientside of the door

Knobset with finger grooves

• Knobtobeonclient’ssideofdoor; the lever on staff side

• Fingergroovesaidgriponknob• Leverdesignedtobemounted

at a 45º angle to avoid use as a ligature point

• Easytoturnwhenusedinconjunction with a lightly sprung lockcase


• Novisiblefixingsontheclientside of the door; tamper-proof fixings on the lever side

Knob/angled lever set

• Knurlingontheedgesimprovesgrip on knob

• Bevellededgeprovidesnosupport for a ligature

• Easytoturnwhenusedinconjunction with a lightly sprung lockcase

• Suppliedcompletewithspindle and back-to-back fixings

• Concealedfixingsontheclientside of the door

• AvailableinSS7finishonly

Knurled knob set

DescriptionItem no.

50.AL8.6KL.2 To suit doors 44mm

50.AL8.6KL.3 To suit doors 54mm

SS7 Unitpair

SA7

Finishes

••pair••

•50.AL8.6KL.4 To suit doors 62mm pair•

DescriptionItem no.

50.AL8.6.2 To suit doors 44mm

50.AL8.6.3 To suit doors 54mm

SS7 Unitpair

SA7

Finishes

••pair••

•50.AL8.6.4 To suit doors 62mm pair•

Specification advice: These products are supplied specific to door thickness to ensure correct installation. Please ensure you specify the correct product number.

When ordering, add the finish code to the item no. eg, 50.AL8.6 SS7

Note: all dimensions are in mm

DescriptionItem no.

50.AL8.K.2 To suit doors 44mm

50.AL8.K.3 To suit doors 54mm

SS7 Unitpair

SA7

Finishes

•pair•

•50.AL8.K.4 To suit doors 62mm pair

Please note. this product is supplied as shown in the image (Right hand set) with the visible fixings to the external lever rose.Please state handing required when ordering.

www.laidlaw.net

10 www.laidlaw.net

LEVER SETS

50

103

64

10

11563

132

12

Specification advice: If used in conjunction with a sashlock, it is advisable to use a lock case with the cylinder above the lever (see bottom item on page 20).

A lightly sprung lock case is not required with this lever set.

DescriptionItem no.

54.AL8.H.L.2 To suit doors 44mm

54.AL8.H.L.3 To suit doors 54mm

SS7 Unitpair

SA7

FinishesLEFT HAND LEVER SETS

••pair••

•54.AL8.H.L.4 To suit doors 62mm pair•

• Aestheticallypleasinglever set that is suitable for a wide range of applications

• DevelopedwithamajorNHSMental Health Trust using rapid prototyping to ensure that it would be operable by less physically able people

• Thecurved,downwardsloping45º horn shape prevents a ligature being attached


• Novisiblefixingsonclientside of the door; tamper-proof fixings on staff side

Please note, the image illustrates a RH set with the visible grub screw on the RH lever (Staff side).

Horn shaped lever set HandingPlease be aware that these lever handles are handed and must be ordered according to the handing protocol shown below.

DescriptionItem no.

54.AL8.H.R.2 To suit doors 44mm

54.AL8.H.R.3 To suit doors 54mm

SS7 Unitpair

SA7

FinishesRIGHT HAND LEVER SETS

••pair••

•54.AL8.H.R.4 To suit doors 62mm pair•

Outside/Staff Outside/Staff

Left Hand Set Right Hand Set

• Leversaretaperedfromthedoor and set at 30º angle to eliminate their use as a ligature point, whilst providing sufficient turning to open the door

• Usedpreferablywithalockcase were the lock is above the lever, if a lock is also required


• Halfleversetsalsoavailable,supplied with bolt through fixings and half spindle

• Novisiblefixingsonclientside of the door; tamper-proof fixings on staff side

Please note, the image illustrates a RH set with the visible fixings on the RH lever rose.

Angled lever set

DescriptionItem no.

54.AL8.30.L.2 To suit doors 44mm

54.AL8.30.L.3 To suit doors 54mm

SS7 Unitpair

SA7

FinishesLEFT HAND LEVER SETS

••pair••

•54.AL8.30.L.4 To suit doors 62mm pair•

Product HandingPlease be aware that these lever handles are handed and must be ordered according to the handing protocol shown above.

DescriptionItem no.

54.AL8.30.R.2 To suit doors 44mm

54.AL8.30.R.3 To suit doors 54mm

SS7 Unitpair

SA7

FinishesRIGHT HAND LEVER SETS

••pair••

•54.AL8.30.R.4 To suit doors 62mm pair•

DescriptionItem no.

54.AL8.30L/H Left hand external

54.AL8.30R/H Right hand external

SS7 Unitsingle

SA7

FinishesHALF LEVER SETS

••single••

Please note, half lever sets are supplied complete with a blind rose on the opposite side. Fixings are visible on the external lever rose.

11 www.laidlaw.net

www.laidlaw.netCYLINDERS & THUMBTURNS

A range of cylinders featuring a clutch mechanism within the cylinder which prevents a person thwarting the operation of the lock by holding the thumbturn.These are for use with a choice of thumbturn and escutcheons as detailed below and are designed to be used in conjunction with Knobsets and Leversets with the lockcases shown on pages 19 and 20.

Anti-Barricade Cylinders

DescriptionItem no.

01 AL0333C.2 To suit doors 44mm

01 AL0333C.3

01 AL0333C.4

To suit doors 54mm

To suit doors 62mm

SS7 Unitset

SA7

Finishes

••set

set••

••

• Mustbespecifiedforusewith Anti-barricade cylinders above• Choiceofthumbturnsavailable• Asrequiredby‘SafetyFirst’, escutcheons have a bevelled edge to prevent them being used as a ligature point• Fordoorthicknessesoutside those listed please contact your Laidlaw Technical Consultant for further information• Backtobackfixingseliminate

screw heads on the client side of the door

Thumbturn & escutcheon sets

DescriptionItem no.

01 AL0333D.2 To suit doors 44mm

01 AL0333D.3

01 AL0333D.4

To suit doors 54mm

To suit doors 62mm

SS7 Unitset

SA7

Finishes

••set

set••

••

DescriptionItem no.

01 933AB.2MK 10 Pin - 70mm to suit doors 44mm

01 933AB.3MK

01 933AB.4MK

01 833AB.2MK

01 833AB.3MK

01 833AB.4MK

EKC3535AB/P.S

EKC4040AB/P.S

EKC4545AB/P.S

10 Pin - 80mm to suit doors 54mm








Cylinders for Mortice LocksetsDue to the unique design of the Primary and Secondary Barricade Function Mortice Locksets, standard cylinders may be used without jeopardising the safety of the lockset. A full range of single and double Euro profile cylinders to suite with Orbis Premier and Commercial ranges is available. Please see page 26 for further details.

Please note, ensure you specify both the cylinder and thumbturn sets to suit the appropriate door thickness.

Specification advice:

The 01 933 range offers a flat type key, considered more suited for mental health unit (MHU) applications.All the cylinders above will suite with Orbis Premier and Commercial ranges for a full masterkeying capability.

12 www.laidlaw.net

www.laidlaw.net

• Asrequiredby‘SafetyFirst’,these escutcheons have a bevelled edge to eliminate their use as a ligature point

• Allversionssuppliedwithtamper-proof fixings

• Backtobackpairssupplied with bolts for 44mm doors. For other door thickness please specify additional fixing packs as detailed below• Availableasback-to-backor

face-fixed - also with blank escutcheons option

• Backtobackfixingseliminatescrew heads on client’s side of door

63mm diameter escutcheons

• Asrequiredby‘SafetyFirst’,these escutcheons have a bevelled edge to eliminate their use as a ligature point

• Allversionssuppliedwithtamper-proof fixings

• Backtobackpairssupplied with bolts for 44mm doors. For other door thickness please specify additional fixing packs as detailed below• Availableasback-to-backor

face-fixed - also with blank escutcheons option

• Backtobackfixingseliminatescrew heads on client’s side of door

50mm diameter escutcheons

DescriptionItem no.

51.AL8.3FF Euro - face fixed

51.AL8.3BB

51.AL8.0B

51.AL8.0

51.AL8.01

Euro - back to back

Euro + Blank

Blank - face fixed

Blank - rear fixed

SS7 Unitsingle

SA7

Finishes

••pair

pair

single

single

••••

••••

DescriptionItem no.

51.AL8.350FF Euro - face fixed

51.AL8.350BB

51.AL8.350B

51.AL8.350

51.AL8.351

Euro - back to back

Euro + Blank

Blank - face fixed

Blank - rear fixed

SS7 Unitsingle

SA7

Finishes

••pair

pair

single

single

••••

••••

CYLINDER ESCUTCHEONS

63

10

50

12

Specification advice: Back to back fixed escutcheons are supplied as standard with tamper proof fixings suitable for doors 44mm thick. For doors outside these dimensions please order compatible fixing packs from the table below.

51.AL8.3BB

51.AL8.0B

51.AL8.350BB

51.AL8.350B

• Additionalfixingpacksfordoorsup to 62mm thick

• Suitableforbacktobackpairs• Suppliedcompletewithtamper proof driver bit

Fixing packs DescriptionItem no.

FP.51.E.2 Fixing pack for doors up to 44mm thick

FP.51.E.3

FP.51.E.4

Fixing pack for doors up to 54mm thick

Fixing pack for doors up to 62mm thick

Specification advice: Back to back fixed escutcheons are supplied as standard with tamper proof fixings suitable for doors 44mm thick. For doors outside these dimensions please order compatible fixing packs from the table below.

10

44mmdoor

15

44mmdoor

10

54mmdoor

19

54mmdoor

Conical Thumbturn ‘D’ Thumbturn

45 41

63 6370mmcylinder

70mmcylinder

80mmcylinder

12

62mmdoor

90mmcylinder

80mmcylinder

www.laidlaw.net

13 www.laidlaw.net

PRIMARY & SECONDARY BARRICADE PROTECTION

Orbis Anti-Ligature mortice locksets have been designed specifically with safety in mind. The lockcase used on each Mortice Lockset is designed with a unique mechanism to give priority to key holders from outside to minimise the risk of the lock being held in the locked position by holding the inside turn handle.

However, in spite of this safety feature the mortice locksets have additional safety features which assist staff in maintaining the safety and security of the facility and its occupants.

Primary Barricade Protection

The Primary Barricade feature ensures access can be gained by use of the external key operation at all times. In general use the turn and pull handles on the outside and inside of the door are designed to provide sufficient grip to operate the door but will not allow the attachment of a ligature. External or staff side pulls provide higher levels of grip but to counteract the possibility of the door being held closed (barricade situation) from the inside, staff can slot a full pull handle over the outer pull to provide maximum grip to overcome the inside turn handle being pulled.

A Secondary Barricade Over-ride Kit is available for emergency applications as shown on page 24.

Secondary Barricade Protection

For some applications, particularly bathroom locksets, where the lock incorporates a deadbolt for privacy, the lockset is designed in such a way as to allow partial disassembly of the lockset from outside to allow staff to open the door in an emergency. This Secondary Barricade Function incorporates a kit which allows speedy removal of the outer lock function plate and an emergency ‘key’ which will operate the bolt mechanism by removal of the outside indicator. A ‘slide-over’ pull handle provides staff with extra pull to overcome the door being held by the inside turn handle.

A Secondary Barricade Over-ride Kit is available for emergency applications as shown on page 24.

Opposite - Removal of the outer plate allows access to the bathroom turn spindle which can be operated with a socket key.

The lockcases used on all Orbis Anti-Ligature mortice locksets shown on pages 14 to 16 are CE marked and have been classified in accordance with BS EN 12209.

www.laidlaw.net

14 www.laidlaw.net

MORTICE LOCKSETS - PRIMARY BARRICADE PROTECTION

Orbis Anti-Ligature Mortice Locksets are supplied as precision engineered assemblies complete with the appropriate mortice lockcase suitable for use with any standard Orbis Euro profile cylinder (ordered separately) on doors up to 62mm thick.

The door thickness must be stated at the time of ordering to ensure the correct fixings are supplied. Comprehensive fixing instructions are supplied with each product to ensure correct fitting in all cases.

The design of the Mortice Locksets is suitable for new installations or in the case of retrofit applications, can be supplied complete with Repair Plate Kits to ensure all previous door preparation is fully concealed.

A full range of ‘off-the-shelf’ Repair Plate Kits are available to ensure any previous door preparation is adequately covered in retrofit applications and to ensure a robust installation where excessive amounts of the door have previously been removed.

Description

Description

Item no.

Item no.

AL93-46TP-1

AL93-56TP-3

Bedroom lockset

Washroom lockset

SS7

SS7

Unit

Unit

set

set

SA7

SA7

Finishes

Finishes

•

•

Featuring a mortice deadlock with rollerbolt latching. Operation of the deadbolt is by cylinder from outside or by turn handle from inside.

• Singleradiusplateversion• Includesspeciallydesignedinternalturnhandle,

external pull handle on plate, mortice lock and single cylinder escutcheon

• Availablefordoorsupto62mmthick• Suitableforsingleordoubledoors,singleordouble swing• Singlecylindermustbeorderedseparatelytosuit door thickness (see page 26 for guidance)• Keyalwaysdominatestheinternalhandle

Featuring a mortice deadlock with live rollerbolt latching. Operation of the deadbolt is by cylinder from outside or by turn handle from inside. Operation of the inside turn handle changes the occupancy indicator. Can also be used on other rooms where occupancy indication is required such as bedrooms.

• Includesspeciallydesignedinternalturnhandle,external pull handle on plate, mortice lock and single cylinder escutcheon

• Availablefordoorsupto62mmthick• Suitableforsingleordoubledoors,singleordouble swing• Singlecylindermustbeorderedseparatelytosuit

door thickness (see page 26 for guidance)• Keyalwaysdominatestheinternalhandle

Bedroom Lockset - Primary Barricade

Washroom c/w Indicator - Primary Barricade

IMPORTANT - Please indicate door thickness when ordering


www.laidlaw.net

15 www.laidlaw.net

DescriptionItem no.

AL93-66TP-1 Auto locking locksetSS7 Unit

setSA7

Finishes

•

Latch can be ‘held-back’ by a reverse turn of the key allowing the lock to be used as ‘free passage’ function.

• Singleradiusplateversion• Innormaloperationlatchiswithdrawnbyturnhandle

from inside and by cylinder from outside• Availablefordoorsupto62mmthick• Suitableforsingleordoubledoors• Singlecylindermustbeorderedseparatelytosuit

door thickness (see page 26 for guidance)• Fordoubleactionorcorridordoorspleasecontactus for further information• Keyalwaysdominatestheinternalhandle• Withanti-thrustfeature

Auto-Locking Nightlatch - Primary Barricade

MORTICE LOCKSETS - PRIMARY BARRICADE PROTECTION


Description

Description

Item no.

Item no.

AL93-76-1

AL93-96-1

En-Suite lockset

Communal lockset

SS7

SS7

Unit

Unit

set

set

SA7

SA7

Finishes

Finishes

•

•

Featuring a mortice deadlock with live rollerbolt latching. Operation of the deadbolt is by cylinder from one side only. Ideally suited to private en-suite bathrooms or for communal rooms where staff can control the access to rooms such as dining or lounge areas, TV rooms or laundry.

• Singleradiusplateversion• Rollerboltlatchinggivesaccessbypullfromboth sides• Availablefordoorsupto62mmthick• Suitableforsingleordoubledoors• Singlecylindermustbeorderedseparatelytosuit door thickness (see page 26 for guidance)• Keyalwaysdominatestheinternalhandle

Suitable for multiple applications where key operation can control the deadbolt from either side. Can be used for security containment or on doors to outside areas that are required to be kept locked. This lockset may also be useful for offices or consulting rooms where the use of a thumbturn on the inside of the door may not be acceptable due to risk of barricade.

• Singleradiusplateversion• Standarddoublecylinderoperation• Availablefordoorsupto62mmthick• Suitableforsingleordoubledoors• Doublecylindermustbeorderedseparatelytosuit


En-Suite/Communal Room - Primary Barricade

Communal Room - Primary Barricade



www.laidlaw.net

Latch can be ‘held-back’ by a reverse turn of the key allowing the lock to be used as ‘free passage’ function.

• Secondarymechanismtounlockdoorineventof blocked keyway, snapped key or failed cylinder• Innormaloperationlatchiswithdrawnbyturnhandle

from inside and by cylinder from outside• Availablefordoorsupto62mmthick• Suitableforsingleordoubledoors• Singlecylindermustbeorderedseparatelytosuit

door thickness (see page 26 for guidance)• Fordoubleactionorcorridordoorspleasecontactus for further information• Keyalwaysdominatestheinternalhandle• Withanti-thrustfeature

16 www.laidlaw.net

MORTICE LOCKSETS - SECONDARY BARRICADE PROTECTION

Description

Description

Description

Item no.

Item no.

Item no.

AL93-46TP-2

AL93-56TP-2

AL93-66TP-2

Bedroom lockset

Washroom lockset

Deadlocking nightlatch

SS7

SS7

SS7

Unit

Unit

Unit

set

set

set

SA7

SA7

SA7

Finishes

Finishes

Finishes

•

•

•

Featuring a mortice deadlock with rollerbolt latching. Operation of the deadbolt is by cylinder from outside or by turn handle from inside.

• Secondarymechanismtounlockdoorineventof blocked keyway, snapped key or failed cylinder• Includesspeciallydesignedinternalturnhandle,

external pull handle on plate, mortice lock and single cylinder escutcheon, plate mounted

• Availablefordoorsupto62mmthick• Forsingleordoubledoors,singleordoubleswing• Singlecylindermustbeorderedseparatelytosuit


Featuring a mortice deadlock with live rollerbolt latching. Deadbolt operation by cylinder from outside or by turn handle from inside with occupancy indicator. Can also be used on other doors requiring occupancy indication.

• Secondarymechanismtounlockdoorineventof blocked keyway, snapped key or failed cylinder• Includesspeciallydesignedinternalturnhandle,

external pull handle on plate, mortice lock and single plate mounted cylinder escutcheon

• Availablefordoorsupto62mmthick• Forsingleordoubledoors,singleordoubleswing• Singlecylindermustbeorderedseparatelytosuit


Bedroom Lockset - Secondary Barricade

Washroom c/w Indicator - Secondary Barricade

Auto-Locking Nightlatch - Secondary Barricade




www.laidlaw.net

17 www.laidlaw.net

DOOR PULL HANDLES

DescriptionItem no.

AL729-AH/2A Square backplate

AL729-AH/3 Rounded backplate

SS7 Unitsingle

SA7

Finishes

•single•

• Co-ordinateswiththeappearance of Mortice Lockset hardware

• Independent‘facefixed’pullhandle on plate

• Suppliedwithtamper-prooffixings as a complete kit

Pull handle on plate

75 72

265

130

37.5

• Idealforusewherethereisclient access to only one side of the door, or in areas where there is a degree of care staff supervision

• Pullhandlefittedto3mmplate• Back-to-backfixingsforextra

strength and security, with option of a blank plate one side

• Faced-fixedoptionalsoavailable• Backtobackhandlessupplied with fixings to suit 44mm doors. For other door sizes please specify an appropriate fixing pack (see page 24)• Suppliedcompletewithtamper-

proof fixings

Pull handle on plate

DescriptionItem no.

53.AL8.2BB Back to back

53.AL8.2

53.AL8.FP

Face fixed

Blank on side

SS7 Unitpair

SA7

Finishes

••single

pair••

••

32

25

85

200

175

50.5

5

85

159

3

www.laidlaw.net

18 www.laidlaw.net

DOOR PULL HANDLES

96

100 36

25

96

36

25

150108

23

105

2215

0

43 41 20

65 20

105

1915

0

25 55

61 25

25

Aluminium (SA7)Stainless Steel (SS7)

• Asrequiredby‘SafetyFirst’,flush pull has a bevelled edge

• Fingercavitydesignedsothatno aid to ligature can be held firm within it

• Matchesescutcheonstyle• Surfacemountedtoavoid

penetrating the door• Face-fixedinSatinAluminium

only• Suppliedcompletewithtamper-

proof fixings

Circular surface mounted pull

• Availableintwodifferentmodels– stainless steel and aluminium, both face-fixed to one side of the door only

• Recessedfingercavityshapeprevents it being converted into a ligature point and discourages barricading

• Withintumescentbackingplaced behind the recessed finger grip, the door can achieve between 30 and 60 minutes fire resistance, depending on thickness

• Suppliedcompletewithtamper-proof fixings

Rectangular flush pulls

• Recessedfingerpullonplate• Doorneedstoberecessedto

accommodate bolts holding the pull to the 3mm thick face plate

• Alsoavailablewithout backplates to order• Backtobackhandlessupplied with fixings to suit 44mm doors. For other door sizes please specify an appropriate fixing pack (see page 24)• Suppliedcompletewithtamper-

proof fixings

Finger grip pull on plate

DescriptionItem no.

61.AL0.3 Face fixedSS7 Unit

singleSA7

Finishes

•

DescriptionItem no.

61.AL0.2FF Face fixedSS7 Unit

singleSA7

Finishes

••

DescriptionItem no.

53.AL8.4FF

53.AL8.4BB

Face fixed

Back to back

SS7 Unitsingle

pair

SA7

Finishes

••

••

6065

300/

425/

600

DescriptionItem no.

53.AL8.3FF Face fixed

53.AL8.3

53.AL8.3BB

Bolt through

Back to back

SS7 Unitsingle

SA7

Finishes

•single

pair••

• Profile provides sufficient pull to shut the door

• Strengthens door at its most vulnerable point

• Available in 300mm as standard. Longer length pulls are available to special order

• Backtobackhandlessupplied with fixings to suit 44mm doors. For other door sizes please specify an appropriate fixing pack (see page 24)• Supplied complete with tamper-

proof fixings

Solid profile pull handle

www.laidlaw.net

19 www.laidlaw.net

6310 3515

6310 3119

63

63

Specification advice: As standard each assembly is supplied with fixings to suit 44mm thick doors. For other door sizes please ensure you order fixing packs as shown on page 24.

BATHROOM TURNS & MORTICE LOCKCASES

Turn type KeyItem no.

51.AL8CT.4/5 Conical Torx

51.AL8CS.4/5

51.AL8DT.4/5

51.AL8DS.4/5

Conical Square

‘D’ style Torx

‘D’ style Square

SS7 SA7

Finishes

••••••

••

• Conical style turn mirrors the shape of knob designs

• Finger grooves aid grip on the thumbturn

• Alternative large ‘D’ style thumbturn design

• Clutch function prevents inside thumbturn preventing operation of the lock

• Bevelled edge escutcheon• Back to back fixing eliminates

fixings on ‘client side’• Tosuit8mmbathroomfollower lockcases as standard• Available with square or torx

key emergency operation• Tosuit44mmthickdoorsas standard• Additionalfixingpacksare available for doors over 44mm thick (please refer to page 24)• Supplied complete with tamper-

proof fixings

Bathroom turn & indicator

• AseriesofEuropeanstylelockcases with double forend, bolt through fixings, 72mm vertical centres (78mm bathroom function) and 60mm backset

• Alllocksfittedwithalowresistance spring to ensure ease of operation with anti-ligature knob and lever sets (except horn shaped lever set)

• Radiusedstainlesssteelforends

• Illustrateditemis13962/RLS• Rebatekitsavailable,please

enquire when ordering

Lockcases - 60mm backset

88

185

20

235

DescriptionItem no.

11 961/RLS Sashlock

13 962/RLS

10 961/RLS

10 961.1/RLS

13 961/RLS

Bathroom lock

Nightlatch

Nightlatch with hold-back function

Latch

Anti-ligature LockcasesA series of lockcases are available to suit a wide variety of applications. The separate lockcases shown below are suitable for all Orbis Anti-Ligature lever and knobsets shown on pages 9 &10 except where particular applications are indicated.All lockcases are supplied with standard Pozidriv fixing screws. If tamper proof fixings are required please specify this when ordering.Please note, all Orbis Anti-Ligature Mortice Locksets (pages 14 to16) are supplied complete with lockcase.

CylindersCylinders must be ordered separately. A full range of single, double and thumbturn cylinders are available. Please refer to page 11 for further details of appropriate thumbturns which can be co-ordinated with knobsets or lever sets.

www.laidlaw.netMORTICE LOCKCASES

101

165

25

228

78

82

95

225

22

150

70

• Aseriesoflockcaseswithdouble forend, bolt through fixings and 82mm backset

• Bathroomlockandbathroomrollerbolt cases use 78mm vertical centres; other cases use 72mm centres


• Fittedwithalowresistancespring to ensure ease of operation with anti-ligature knob and lever sets

• Notsuitableforhornshaped lever sets 54.AL8.H.L

• Illustrateditemis12882/RB• Rebatekitsavailable,please

enquire when ordering

Lockcases - 82mm backset DescriptionItem no.

11 882 Sashlock

11 882/RB

12 882

12 882/RB

13 882.5

13 882.8

13 882/RB

10 882

13 881

Roller bolt sashlock

Deadlock

Roller bolt deadlock (push/pull)

Bathroom lock - 5mm follower

Bathroom lock - 8mm follower

Roller bolt bathroom lock (push/pull)

Nightlatch - handed LH/RH*

Latch

DescriptionItem no.

11 870 Sashlock

12 870

13 872

10 870

10 870HB

10 870E

13 871

Deadlock

Bathroom lock - 5mm or 8mm follower**

Deadlocking nightlatch (without holdback)

Deadlocking nightlatch (with holdback)

Emergency nightlatch

Latch

Upside down lockcase which places the cylinder above the lever position. This ensures there is no interference between angled levers and the cylinder.• Aseriesoflockcasesthat

meets the recommendations for accessibility in BS 8300

• Keywayisaboveleverhandleposition, making it more easily used by people with impaired vision or dexterity

• Lockcaseshave70mmbacksetand 104mm vertical centres


• Forusewithleversetsonly• Illustrateditemis11870• Rebatekitsandextended

strikes are available, please enquire when ordering

Lockcases - 70mm backset

20 www.laidlaw.net

Operating characteristics

11 882 Lever operation of latch, deadbolt by cylinder

11 882/RB Lever operation of roller, deadbolt by cylinder

12 882 Deadbolt operated by cylinder

12 882/RB Push/pull rollerbolt latching, deadbolt by cylinder

13 882 Lever operation of latch, deadbolt by thumbturn

13 882/RB Push/pull rollerbolt latching, deadbolt by thumbturn

10 882 Latch operated by cylinder from outside and by lever from inside - specify LH or RH

13 881 Latch operated by lever

Specification advice

The bathroom lock variant 13 872 uses a special adapter which fits inside the cylinder aperture.

** Note; The adapter has an insert which will accept either a 5mm or 8mm spindle for a bathroom turn and indicator set. The effect of this is to offset the thumbturn centre and fixing centres. An adapted bathroom turn and indicator set is available for use with this application. Please specify this when ordering.

A range of rebate kits and extended lip strike plates are available. Please ask for further details.

101

165

25

228

82

12 882/RB

11 870

95

225

22

150

70

11 882 13 882/RB 11 870 13 872**

* please specify hand when ordering

www.laidlaw.net

21 www.laidlaw.net

7135.5

100

• Triple-knucklebutthinge• Chamferedknuckleprevents

hinge being used as ligature point

• Radiusedcornerprofile• Fixingstodoorandframe

concealed by security cover plate, secured by tamper-proof fixings

• Stainlesssteelfinish• Minimumdoorthickness44mm• Maximumdoorweight120kg• SafetyGrade4toDHFTS001

(for details, see page 3)• Withintumescentstripin

place, hinge is suitable for use on 30 and 60 minute fire doors

• Certifireapproved–CF209• ToBSEN1935Grade13• CEMarked• Maintenancefreewitha25year

guarantee

Chamfered knuckle hinge

ANTI-LIGATURE HINGES

DescriptionItem no.

37 AL.2.1 Radius cornersSS7 Unit

singleSA7

Finishes

•

A continuous, full length hinge with anti-ligature tip is ideal for use in healthcare, physchiatric and secure accommodation.

• Fullheightupto2100mm• Canbecuton-sitetosuitdoor height• Singleactionissuitablefor

doors up to 125kg• Doubleactionissuitablefor doors up to 176kg• Continuousgearing• Aluminiumfinish• Minimumdoorthickness44mm• FiretestedtoBS476pt.22for

60 minute rating• Versionsuitableforusewith

Perko Powermatic door closer (please ask for details)

Continuous hinge

DescriptionItem no.

37 580.H Continuous hinge

37 580.HC With cut-out for closer

SS7 Unitsingle

SA7

Finishes

•single•

37 580.HC

19.8

17.5

31.8

7.9

SINGLE ACTION

DescriptionItem no.

37 583 Continuous hingeSS7 Unit

singleSA7

Finishes

•

DOUBLE ACTION

www.laidlaw.net

22 www.laidlaw.net

A continuous, retractable door stop allows staff to release the stop to convert a normally inward opening door to open outwards in the event of an emergency.

• Fullheightupto2100mm• Canbecuton-sitetosuitdoor height• Stopislockedusinga

concealed hook bolt• Aluminiumfinishwithoptional

solid sapele timber stop• Minimumdoorthickness44mm• FiretestedtoBS476pt.22for

30 and 60 minute rating

Retractable door stopDescriptionItem no.

37 581 Removable stop

37 582 Removable stop c/w timber

SS7 Unitsingle

SA7

Finishes

•single•

DOOR STOPS & EMERGENCY RELEASE

PRES

S CE

NTR

E TO

REL

EASE S

U

H

P

40

80

17

42

112

14

Specification advice: Tamper-proof fixings are not provided as standard with hold back door stop or emergency release door stop. If required, please request when ordering.

• Used in conjunction with a pivot set

• Release device can be depressed to allow door that normally opens inwards to open outwards and allow access to room

• Available in stainless steel only• Maintenance free with a 25 year

guarantee

Emergency release door stop

• Allowsdoubleswingdoortoact as single swing when hung on pivots

• Toactivatestop,centralpinisdepressed

• Toallowdoortoswing,wholestop is depressed

• Versioninwhichstopcanbelocked in or out is also available

• Manufacturedinstainless steel only

• Maintenance free with a 25 year guarantee

• Optionalprotectionplate (80 x 25 x 25mm) minimises possible damage to door face

Hold back door stop

DescriptionItem no.

37 570 Door stopSS7 Unit

singleSA7

Finishes

•

DescriptionItem no.

37 571 Hold-back door stop

37 572

37 500

Door stop with lock option

Door Protection plate

SS7 Unitsingle

SA7

Finishes

•single

single••

Specification adviceThis door stop must be used in conjunction with pivots or with the double action continuous hinge shown opposite.This door stop is handed and must be ordered according to the following protocol.

37 582

STAFF SIDE

Clockwise closingRIGHT HAND

STAFF SIDE

Anti-clockwise closingLEFT HAND

www.laidlaw.net

23 www.laidlaw.net

PIVOT SETS AND FLOOR SPRING

82

285

50

Specification advice: Tamper-proof fixings are not provided as standard. If required, please request when ordering

Specification advice: Tamper-proof fixings are not provided as standard. If required, please request when ordering.

• Suitablefordoorsweighingupto 80kg when floor mounted and up to 1100mm wide when jamb mounted

• Squareorradiusedends• Usedinconjunctionwith

doorstops• Allowsaccesstoroomfrom

closing side of door• Idealforuseifbarricadingis

likely to occur or emergency access required (eg, to a toilet)

• Radiusedversionissuitableforuse with 30 minute fire doors

• Suppliedasasetwithallnecessary components, including fixing screws

• Maintenancefreewitha25yearguarantee

Double action pivot setDescriptionItem no.

37 575

37 576

Square profile

Radiused profile

SS7 Unitsingle

single

SA7

Finishes

••

DescriptionItem no.

37 578 Radiused profileSS7 Unit

singleSA7

Finishes

•

• Suitablefordoorsweighingupto 120kg and up to 1100mm wide

• Floormounteddoubleaction• Radiusedendsonly• Suitableforusewith30minute

fire doors• Idealforuseifbarricadingis

likely to occur or emergency access required

• Suppliedasasetwithallnecessary components, including fixing screws

• Maintenancefreewitha 25 year guarantee

Heavy duty pivot set

• Useofafloorspringeliminatesthe ligature point of an overhead closer

• Variablepowersizefrom1to4• Adjustableclosingspeedand

mechanical back check• Stainlesssteelcoverplate,with

standard fixings

Floor spring

DescriptionItem no.

30 764 Floor spring - EN size 1-4SS7 Unit

singleSA7

Finishes

•

www.laidlaw.net

24 www.laidlaw.net

ACCESSORIES

30 63

63 12

48

95

Wherever possible all ‘Client-side’ hardware has fully concealed fixings. All outside or ‘Staff-side’ hardware should be fitted with tamper proof fixings. Where tamper-proof fixings are not supplied as standard they can be ordered seperately.We keep a large range of Torx Pin and Hex Pin fixings suitable for bolt through or face fixing applications, along with the relevant tool bits.

Tamper-Proof Fixing Packs

• Anti-ligaturesphericalcasing• Hookcanholdtheweight

of a small coat but will drop downwards if heavier load is applied

• Adjustableresistance• Supplied complete with tamper-

proof fixings

Coat hookDescriptionItem no.

81.AL8.03 Coat hookSS7 Unit

singleSA7

Finishes

• •

DescriptionItem no.

70.AL8.DV Door viewerSS7 Unit

singleSA7

Finishes

• •• Covermaskstheeyepieceon

the staff side• Coverreleasedbykeyto

ensure viewer can only be used by staff

• 180˚viewer• Fordoors40-55mmthick• Suppliedcompletewithcover

release key and tamper-proof fixings

Door viewer

For emergency situations, kits are available which will assist staff to overcome a barricade situation by providing high levels of grip (see page 12 for details).Barricade set illustrated includes a ‘quick release’ driver which allows staff to remove external hardware giving access to the bathroom turn spindle.

Barricade Over-ride sets

DescriptionItem no.

AL4DB Hextorx H40 Pin driver bit

AL4AADB

FP.51.E.2

FP.51.E.3

FP.51.E.4

FP.53.W.2

FP.53.W.3

FP.53.W.4

FP.53.P.2

FP.53.P.3

FP.53.P.4

60mm thumbturn fixing pack (incl AL4DB)

Bolts (pair) for Turns/Escut. - 44mm doors



Bolts (6 pack) for 53 AL8.2 & .4 - 44mm doors



Bolts (pair) for 53 AL8.3 - 44mm doors



DescriptionItem no.

AL900-EK Barricade over-ride kit c/w ‘slide on’ pull, spindle key, quick release driver, replacement indicator assembly and screw pack suitable for Primary and Secondary Barricade over-ride

www.laidlaw.net

25 www.laidlaw.net

WINDOW FITTINGS

• Anti-ligaturewindowhandlewith integral deadlock

• Canalsobeusedfornarrowstile doors

• Internalplatemountedhandlewith shrouded cylinder

• Supplied complete with tamper-proof fixings

Window handle with deadlock

DescriptionItem no.

AL800-CML Window handleSS7 Unit

singleSA7

Finishes

•

• Anti-ligaturewindowhandle• Mountedon3mmplate• Suitableforuseineither position, for sash, tilt or hinged windows• Supplied complete with tamper-

proof fixings

Window pull handleDescriptionItem no.

AL800-PH1

AL800-PH

Plate mounted handle

Handle only

SS7 Unitsingle

single

SA7

Finishes

••

• Anti-ligaturewindowhandle• Mountedon3mmplate• Suitableforuseineither position, for sash, tilt or hinged windows• Completewithheavyduty camlock and strike plate• Supplied complete with tamper-

proof fixings

Window pull with camlockDescriptionItem no.

AL800-LFC Plate mounted handleSS7 Unit

singleSA7

Finishes

•

• Anti-ligaturewindowhandle• Mountedon3mmplate• Designedforusein conjunction with windows with multi point locking• Supplied complete with tamper-

proof fixings

Window pull with turn handle

DescriptionItem no.

AL800-ESP Plate mounted handleSS7 Unit

singleSA7

Finishes

•

• Restrictstheopeningofthewindow

• Adjustableopeningangle• Designedforusein conjunction with top hinged or pivotted windows• Supplied complete with tamper-

proof fixings

Window restrictorDescriptionItem no.

AL800-R10-A Window restrictorUnitpair

225

38

30

52.5052.50

125

55

23

3 3

6

30

225

30

225

www.laidlaw.net

Installation problems can be avoided by:• Factorypreparationofdoors.Orbisdoorsetscan be fully pre-prepared and in some cases, with non- projecting hardware factory fitted• Ensuringhardwareisspecifiedcorrectlytosuitthe door thickness. This ensures fixings and spindles (in the case of operating hardware) are supplied accordingly.• Ensuringcylinderswhereappropriate,arespecifiedin the correct length to suit the door thickness• Qualitypreparationworkiscarriedoutwhenretro- fitting in place of existing locks• Ensuringthegapbetweendoorandframeis between 3mm and 7mm

26 www.laidlaw.net

TECHNICAL ADVICE

For door thickness

Single Cylinder

44mm

54mm

43mm (45mm)

48mm (50mm)

Double Cylinder

44mm

54mm

64mm (70mm)

74mm (80mm)

30/35/401060/70/80

Ranges of cylinders are available for use with Orbis Anti-ligature Mortice Locksets which can suite with Orbis Premier, Orbis Commercial or Centurion hardware ranges. These cylinders can form part of a masterkey system.

Cylinders for Mortice Locksets

Door Preparation and Installation

Correct installation of Orbis Anti-Ligature hardware is critical for the hardware to function correctly in order to preserve the safety of the vulnerable people who will use it on a daily basis. It is therefore essential that all those individuals who are are charged with specifying, installing and maintaining the hardware accept the appropriate level of responsibility to ensure the correct performance of the product is achieved in practice. As with any other craft based task, accurate preparation of the doorset (or window in the case of window fittings) is crucial to achieving a well installed product. No matter how diligent the fitter of the hardware, a poorly prepared door will result in an inefficient or ineffective product.

Correctly prepared doors with accurate alginment of fixing bolt holes to ensure trouble

free operation

Badly prepared doors will inevitably lead to poorly fitting and poorly performing door

hardware.

Installation and Maintenance

Accurate installation and carrying out routine checks on your hardware is essential in ensuring that it continues to function properly and to maintain the high quality finish. The following simple advice on maintenance procedures should be carried out to all Orbis Anti-Ligature door and window products:

• Thetamperprooffixingssuppliedwiththeseproductsareanintegralelementinthesafetyoftheproductandtheymustnotbesubstitutedforstandard fixing screws or bolts• Theuseofpowerdriverswithtamperprooffixingsisnotrecommendedasthereisariskofdamagingthetamperproofhead• Duringinstallationandperiodicallythereafter,checkthatfixingsremaintightandthatthereisnounduemovementinanyofthehardware.Remember,a loose item of hardware could become a ligature point• Ensurethatalllatchesandboltsoperatefreelywithoutrequiringunduepressuretooperatethem• Allitemsshouldberegularlycleanedusingasoftclothandanon-abrasivemildsoapsolution• Allmovableproductsshouldalsobelubricatedatnomorethan3monthlyintervalsusinganyproprietarybrandofaerosolappliedpetroleumdistillate (e.g WD40). Ensure any excess lubricant is removed from the surface of products using a soft cloth

Please note: Oil and carborundum based lubricants MUST NOT be used under any circumstances.

Factory preparation of doors is recommended to ensure perfect alignment of holes

Specification adviceThe dimensions shown above are recommended overall cylinder lengths. The figure in brackets is the maximum length of cylinder suitable for this door thickness. We suggest you contact us before specifying these cylinders.

www.laidlaw.net

While Laidlaw has taken every care to ensure the accuracy of information, data and advice contained in this literature, no liability in respect of such information whether given negligently or not can be accepted by the company. Due to variations in the printing process, actual colours may differ from those shown. Laidlaw retains the right to amend the technical specification of any range of equipment shown.

As part of continual efforts to reduce our carbon footprint, this brochure was printed on a FSC approved paper stock which originates from well-managed forests, controlled sources and recycled wood or fibre as indicated by the logo below.

As the UK's leading specifier and supplier of architectural ironmongery, doorsets, handrail & balustrading and access control solutions, Laidlaw offers its unique service through a national network of 13 sales offices and trade counters.

Each Laidlaw sales office is supported by a centralised distribution centre at Willenhall which has the capacity to pack and despatch individual items or by doorset.

Laidlaw subscribes to NBS Plus which contains full specification clauses for all Laidlaw products and is a RIBA approved supplier of CPD seminars.

Laidlaw also subscribes and is an active member of The Guild of Architectural Ironmongers (GAI) which is a recognised body that promotes standards in integrity and excellence in the business of architectural ironmongery.

BarnstapleUnit 1, Brannam Crescent

Roundswell Business Park (West)Barnstaple, North Devon

EX31 3TD

T: 01271 311920F: 01271 311929

BristolUnit 8, Riverside Business Park

St. Annes Road, St. AnnesBristol BS4 4ED

T: 0117 300 3980F: 0117 980 3058

CardiffTy Cefnfor, Ocean Park

Cardiff CF24 5PE

T: 029 2047 1808F: 029 2049 0250

GatesheadUnit 1 Halifax Court

Halifax RoadDunston, Gateshead

Tyne & Wear NE11 9JT

T: 0191 461 4100F: 0191 461 4101

Glasgow4 Clifford Court

171 Woodville StreetIbrox Business ParkGlasgow G51 2RQ

T: 0141 445 8892F: 0141 445 8871

Kinmel BayUnit 37 Tir Llwyd Industrial Estate

St Asaph AvenueKinmel Bay, Rhyl

North Wales LL18 5JA

T: 01745 332151F: 01745 332493

Laidlaw Gulf LLCPO Box 185292

DubaiUnited Arab Emirates

T: +971 (0) 4885 7228F: +971 (0) 4885 7229

Sales OfficeTrade CounterDistribution Centre

Liverpool3 - 5 Century Building

Summers RoadBrunswick Business Park

Liverpool, Merseyside L3 4BL

T: 0151 709 9438F: 0151 709 9455

LondonThe Building Centre

26 Store StreetLondon WC1E 7BT

T: 0207 436 0779F: 0207 436 0740

PerthPO Box 15, Arran Road

Perth PH1 3DU

T: 01738 620581F: 01738 633262

SalfordCenturion House

Dakota Avenue, SalfordManchester M50 2PU

T: 0161 848 0101F: 0161 872 9313

SheffieldUnit 4

Sheffield Industrial EstateSurbiton Street

Sheffield S9 2DN

T: 0114 243 8916F: 0114 242 6591

WillenhallStrawberry Lane

WillenhallWest Midlands

WV13 3RS

T: 01902 600400F: 01902 600490

YorkSaturn Architectural Solutions Ltd

Unit 9 Harrier CourtAirfield Business Park

Elvington, York YO41 4EA

T:01904 608864F: 01904 607759

To email a UK sales office use the following format: [email protected] (e.g. [email protected])

Architectural Ironmongery SolutionsLaidlaw is the leading specifier, distributor and technical service provider of architectural ironmongery to the UK construction industry. As with all its product portfolios, Laidlaw's huge range of architectural ironmongery, including the renowned Orbis brand, is designed to comply with European building standards.

Doorset SolutionsLaidlaw has pioneered the Orbis Doorsets solution which is supplied complete with the door, frame, architraves and factory fitted ironmongery to maximise efficiency and minimise on-site work.

Handrail and Balustrade SolutionsUsing a modular system in either stainless steel, nylon, timber or a combination of these, Laidlaw's handrail and balustrade solutions are designed to satisfy each client's specifications. Offering the complete technical service, highly trained staff are involved at every stage of each project, from site surveys and design through to supply and installation.

Access SolutionsFrom simple masterkeyed cylinders up to state-of-the-art biometric access control and automatics, we have the expertise to design and supply an integrated system which will manage the access into and around even the most complex buildings to suit each specific application.

© Laidlaw Solutions Limited April 2010/L106/004

RS 10508

ad

v an c

i ng a

r c h i t e c t u r a l i r o n mo n g

er y

g a i m e m b e r

EMS 531228

CONTRACTORS HEALTH &

SA

FETY

A

SSESSMENT SCHEM

E

Chas Accredited

HAIncorporating DSMA & ABHM

Technical Helpline: T: 0845 0700 970 F: 0845 026 4669 E: [email protected]

Date post:	09-Mar-2016
Category:	Documents
Upload:	laidlaw-solutions-ltd
View:	328 times
Download:	10 times

Orbis Anti-Ligature

Documents