Date post: | 21-Mar-2016 |
Category: |
Documents |
Upload: | jimijoncom |
View: | 237 times |
Download: | 3 times |
RETRACTABLE & PREMIUM BANNER STANDS ___________________ 1 - 2
AFFORDABLE RETRACTABLE BANNER STANDS: ___________________ 3
ECONOMY, TELESCOPIC & SCROLLING BANNER STANDS ____ 4 - 5
OUTDOOR PRODUCTS_______________________________________ 6 - 7
DFA ECONOMY BANNER STANDS ____________________________ 8 - 9
TENSION FABRIC EXHIBIT SYSTEMS ______________________________ 10
AERO MULTI-OPTION BACKWALL & TABLETOP BANNERS _________ 11
POPUP EXPANDING DISPLAY SYSTEMS _____________________ 12 - 14
HERO SEAMLESS EXHIBIT PANELS __________________________ 15 - 16
HORIZON & EFEX FAST FOLDING DISPLAY PANELS _______________ 17
VOYAGER FAST FOLDING DISPLAY PANELS ______________________ 18
MOLDED CASES AND ACCESSORIES ____________________________ 19
LITERATURE RACKS ________________________________________ 20 - 21
ORBITAL EXPRESS EXPO TRUSS KITS & ACCESSORIES ________ 22 - 31
LINEAR SPEEDLINE TABLETOP & PORTABLE EXHIBITS __________ 32 - 35
ACCESSORIES _______________________________________________ 36
LUMINOSITY DISPLAY LIGHTING & ACCESSORIES _________________ 37
ENVIRONMENTAL RESPONSIBILITY
We believe that being environmentally responsible doesnt have to cost more. Our continued commitment to the environment is evident throughout our product line our banner stands are constructed of highly recyclable materials that include aluminum and steel. The Coyote & Spyder popups have a 100% recyclable display frame. Our popup and panel display fabrics are made from 100% post consumer waste plastic bottles. Virtually all of our corrugated packaging is made from recycled/recovered paper fiber.
CONTENTS
UNCOMPROMISING VALUE
The Exhibitors Handbook is your guide to the most comprehensive selection of tradeshow, display and presentation products and solutions. No matter how large or small the project, we understand your presentation needs. Our commitment to you is to provide a wide spectrum of choices and options, quality you can count on along with fast, friendly and efficient service.
From small presentations to full blown tradeshow exhibits, you will find everything you need, right here, or if you prefer you can check online at www.exhibitors-handbook.com.
STATE-OF-THE-ART GRAPHIC SERVICES
Todays technology puts high quality, large format graphics within the reach of every exhibitors budget. A breathtaking graphic effectively delivers your message by grabbing attention and driving traffic to your booth! The Exhibitors Handbook is your One Stop Shop for all your graphic needs.
Our heavy investment in the latest state-of-the-art technology includes dye sub, grand format, direct to substrate UV and high resolution inkjet printing. We also offer back-lit transparencies, CNC cut vinyl, raised lettering and most forms of signage.
Our commitment to the environment is evident in our mate-rial choices as well. We print on many natural fabrics, such as cotton, and our direct to substrate graphics eliminate adhesives, as well as the liner paper needed to transfer those adhesives, making them eco-friendly.
For more information about adding graphics to any prod-ucts in this catalog, or if you are looking to replace graphics for products you already own, call us today. Our experienced graphics specialists will help take your display to a whole new level!
BANNER STANDS: RETRACTABLE - PREMIUM
IMAGINEPREMIUM
A premium, single-sided banner stand that features a graphic tensioner, anti-slip strips along the base unit, integrated pole storage & an interchangeable graphic cassette. Banner stand comes complete with a telescopic pole and an EVA molded carry bag.Order ref: IMG
Graphic size is variable:31.5" W x 29.5"H up to 83.35"H(+ bleed)
1
BANNER STANDS: ECONOMY
LIGHTNINGECONOMY BANNER STANDLightning is light weight and easy to use with snap-lock graphic rails to make graphic changes quick and simple, and a 3 piece bungee corded pole. Comes complete with a budget carry bag.Order ref: LTNGGraphic size: 31.5W x 77.5H (+ bleed).
Uno Standard31.5 wide: UN-1-STGraphic size: 31.5W x 34.5H up to 85.5H (+ bleed).
Uno Mega36 wide: UN-1-MGGraphic size: 35.5W x 34.5H up to 85.5H (+ bleed).
Uno Monster48 wide: UN-1-MOGraphic size 48W x 34.5Hup to 85.5H (+ bleed).
UNOThe Uno stand features a weighted aluminum base for stability and a versatile aluminum telescopic pole that can be used with multiple banners to create an almost seamless back wall. Each stand comes with a carry bag and graphic storage. This versatile banner stand can be used with Velcro receptive fabrics. Call for details.
Available in 3 Sizes
4
BANNER STANDS: TELESCOPIC & MOTORIZED SCROLLING
DASH 1 TRIPOD TELESCOPIC BANNER STAND
A well crafted tripod banner stand, manufactured of anodized aluminum that is very stable, quick & easy to erect. Available as either a single or double sided unit. A carry bag is included.Dash Mini single sided: DSH-MGraphic size: 31.5W x 78.5H(+ bleed).Dash Mini double sided: DSH-M-2
DASH 1 OPTIONSAn optional 3 pocket literature dispenser is available. When adding the literature pocket,graphic size is 31.5W x 44H (+ bleed).Order ref: DSH-M-L-1Double sided unit with 2 literature dispensersOrder ref: DSH-M-L-2
DASH MEGA 1 & 2 TRIPOD TELESCOPIC BANNER STAND
Dash Mega is a well crafted tripod banner stand. Manufactured of anodized aluminum, its very stable, quick & easy to erect. Available as either a single or double sided unit. A carry bag with tube is included.
Dash Mega 1 is single sided: DSH-MEGraphic size: 36W up to 93.5H (+ bleed).
Dash Mega 2 is double sided: DSH-ME-2
PEGASUSFULLY ADJUSTABLE TELESCOPIC BANNER STAND
Pegasus makes an excellent budget backwall or backdrop that can be used as a single or double-sided unit with dual telescopic poles (horizontal and vertical).
Available in 2 Sizes and Colors
PegasusVisual minimum of 52.5W up to 95W and from 36H up to 96H (+ bleed).
Silver finish: PGSUS-S
Black finish: PGSUS-B
Pegasus Mini Visual minimum of 27.5W up to 48W and from 36.5H up to 96H (+ bleed).
Silver finish: PGSUS-MIN-S
Black finish: PGSUS-MIN-B
MAVERICK STANDARDECONOMY MOTORIZED SCROLLING BANNER STAND
Twin Telescopic arms allow you to set the height of your display from 48 up to 72. The scrolling mechanism at the top offers a wide variety of options for the length and style of your graphic. The Maverick Standard utilizes standard 110v power and comes complete with a carry bag. Graphic size: 28.75W x 145H (maximum height of looped graphic). Order ref: MAV-STD
5
6OUTDOOR PRODUCTS
WIND DANCERTELESCOPIC OUTDOOR
FLAGPOLEA great option for outdoor and indoor banner display with an adjustable height of up to 173. The hollow base can be filled with either water or sand as a weighting agent. When assembled, the unit is easy to position, erect and remove.
Order ref: WIND-MXGraphic size: 43W x up to 144H (allow 2 along the top and left side for #3 grommet placement).
WIND DANCER LANYARDFLAGPOLE OPTION
WIND DANCER SPIREDOUBLE-SIDED WIND DANCER OPTION
Allows a standard Wind Dancer unit to be converted to a doubled-sided V shaped banner. Approximate graphic dimensions: 39.4W x 157.5H, (allow 2 along top and bottom for #3 grommet placement). Note: Spire option is NOT intended for outdoor use. Order ref: WIND-MX-FPCK2
Kit includes: top and bottom pole hardware, graphic attachment rings and ring stops.
ZOOMThe Zoom can be used indoors or out with a unique design that allows the graphic to rotate with the wind. The water fillable donut weight adds stability (as pictured).The graphic is printed on flag material and reaches over over 8 tall when used with the floor base and close to 10 tall when using the ground spike (included). A double sided graphic is available, call for more info. Carry bags are included. Order ref: ZOOMGraphic size: 45.75W x 86H (+ bleed).
BLASTA portable outdoor flag system designed to display up to five flags simultaneously. The 20 reach of these flagpoles make a dramatic statement at your conference or event. Streamers or smaller flags can be added for a different look. Bungee corded poles are fabricated from a hybrid aluminum/steel. The powder coated steel base comes complete with four ground spikes and a rubber mallet.Order ref: BLSTGraphic size: 34W x 173.5H (no bleed).
Both the floor base and the outdoor spike base are included in the kit.
Allows a standard Wind Dancer unit to be converted into a flagpole.Order ref: WND-MX-FPCK
7STORM PROOUTDOOR BANNER STAND
The Storm PRO offers excellent strength and stability. The hollow Silver base can be filled with water or sand, and the telescopic support pole and adjustable central hub allow you to vary the height of the graphic to fit your needs. The graphic can rotate 45 or from horizontal to vertical. Note: Graphic does not rotate when set to maximum height.
MONSOONA semi-portable double sided billboard that features a strong frame that is quick and easy to assemble. Includes ground stakes and bungee rope. (Banner and grommets not included). Graphic size is 92.125W x 32H (+ bleed). Order ref: MONSN-2
SPINNAKERPORTABLE OUTDOOR
BILLBOARDA versatile indoor/outdoor billboard that can be used for single or double sided presentation. With a maximum graphic area of 8 wide x 8high (weather and wind conditions permitting), its an ideal promotional solution for outdoor events, advertisements, exhibitions and public areas such as airports and shopping centers. Units can be linked together for added impact! Order ref: SPKRGraphic size: 98WGraphic height is variable:45 minimum up to 98 (+ bleed).
OUTDOOR PRODUCTS
Single sided: STRM-PRDouble sided: STRM-PR2Graphic height varies: 23.5W X 61.5H or 86H (+ bleed) with bottom arms attached.
ROCKETSPRING ACTIVATED OUTDOOR
SIGN SYSTEMThe three legs can be filled with water or sand for extra stability and the spring-loaded graphic support provides the flexibility needed to handle the change of outdoor elements. 1/8 corrugated plastic or similiar substrate is recommended. Graphic size may vary. This product design is ideal for contour cut custom graphics.
WHIRLWINDSPRING-FLEX
DOUBLE-SIDED SIGNThe front-loading snap frames feature aluminum and powder-coated steel construction. Graphic changes are quick and easy.
The dual spring design flexes to help withstand wind gusts while the compact, durable base can be filled with water or sand for extra stability (also comes with wheels for easy installation and removal.)
Graphic Size: 23.125W x 32.875H(+bleed).
Visual area: 22.75W x 32.25H
Order ref: WHRL-WND
CAMPAIGNINDOOR & OUTDOOR ROAD SHOW
PROMOTIONAL COUNTERQuick assembly with strong, easy to clean plastic parts make the Campaign great for retail promotion. Kit comes complete with a handy carry bag, set of poles and an eye catching header.Order ref: CP-B1
May be used as a single or double-sided sign. Rocket comes complete with adhesive tape rings for immediate mounting. Recommended max. graphic size: 24W x 36H.
Order ref: RCKT
Wind slits are highly recommended for all vinyl & fabric outdoor graphics!
8RETRACTOR 2Order ref: RTRC-2
Graphic size: 31Wx 77.5H (+ bleed)
8
RETRACTOR 5Order ref: RTRC-5
Graphic size: 36Wx 79.375H (+ bleed)
RETRACTOR 4Order ref: RTRC-4
Graphic size: 32.75W x 78.25H (+ bleed)
RETRACTOR 1Order ref: RTRC-1
Graphic size: 31.5W x 78.75H (+ bleed)
TELESCOPIC 2Order ref: TEL-2
Graphic size: 39W x 60.25H up to 89H (+ bleed)
TELESCOPIC 3Order ref: TEL-3
Graphic size: Two at 39Wx 60.25H up to 89H (+ bleed)
TELESCOPIC 4Order ref: TEL-4
Graphic size: 31W x 77H (+ bleed)
TELESCOPIC 1Order ref: TEL-1
Graphic size: 23.5W x 36H up to 70H (+ bleed)
DFA (Direct from Asia) is our range of super economy banner stands. Unlike most of our other banner stand products which are designed and developed by our team of display specialists in the U.S.A, the DFA range of indoor and outdoor banner stands represents the best of the best choice from a selection of independent display producers located across the length and breadth of Asia. DFA products provide the same basic functions and reliability, yet offer the cost effective advantage of a lighter and simpler construction, making them a very economic choice.
www.dfaproducts.com
99
SPRING 1-1 Order ref: SB-1-1
Graphic size: 24W x 59H or 78.5H
SPRING 1-2 Order ref: SB-1-2
Graphic size: 27W x 59H or 78.5H
SPRING 1-3 Order ref: SB-1-3
Graphic size: 35.25W x 59H or 78.5H
SPRING 3 Order ref: SB-3
Graphic size: 27.5W x 70.75H
(#3 grommets in corners)
SPRING 5 Order ref: SB-5
Graphic size: 31.5 W x 78.5 H (#3 grommets in corners)
SPRING 4 Order ref: SB-4
Graphic size: 30W x 60H (#3 grommets in corners) www.dfaproducts.com
SPRING 6 Order ref: SB-6
Graphic size: 24.5 W x 63 H (#3 grommets in corners)
SPRING 7 Order ref: SB-7
Graphic size: 29.5 W x 61.5 Hup to 69H (+ bleed)
(#3 grommets in corners)
China pricing from a U.S. Supplier!
TENSION FABRIC EXHIBIT SYSTEMS
Tension fabric systems are the next generation in large format graphic displays. These light weight systems are highly portable and easy to set up, offering maximum impact with minimal fuss! Many other sizes are available, call for details.
HOPUPPORTABLE DISPLAY
The HopUp has a light weight, heavy duty frame that can suspend a fabric graphic mural. It sets up in seconds and can be packed away just as quickly! Available in many convenient sizes including:6 wide tabletop system : HOP-2x2-S8 wide system: HOP-3x3-S10 wide system: HOP-4x3-S
The durable fabric graphic image stays attached to the aluminum frame for fast and efficient use.
A carry bag is included with all units.
FORMULATE 1Vertically curved 10 wide tension fabric exhibit structure: FMLT-1Graphic size: 114W x 94.5H (approximate)Wrap-around tabletop in Silver finish: FMLT-TT-S Wood finish: FMLT-TT-W(Tabletop sold separately)
FORMULATE 2Horizontally curved 10 wide tension fabric exhibit structure: FMLT-2Graphic size: 123.125W x 92H (approximate)Clamp-on literature pocket: FMLT-LP (pocket sold separately)
An OCL hard storage case is included with all units.
10
MULTI-OPTION BACKWALL DISPLAY KIT, TABLETOP BANNERS
AEROMULTI-OPTION GRAPHIC BACKWALL DISPLAY KIT
This premium indoor/outdoor modular display system is an effective solution for space separation. Adjustable heights and angles allow for a variety of advertising and display possibilities. Kit includes 2 light fittings and bags. Shown with optional Lumina 200 wall washer floodlights, sold separately. Aero is also available a la carte, allowing you to create even more display combinations.Order ref: AEROGraphic size is variable.
Kit comes complete as shown above.
VORT-X MINIMINI TABLETOP BANNER STAND
A great low cost promotional item for tabletop banner stand presentation that is quick and simple to assemble, making it ideal for retail/POP use. Available in 3 colors, sold in packs of 2. Graphic size: 12W x 16.5H (with holes punched in the four corners).
Order ref: Red: VTX-MCBlue: VTX-MC-BLBlack: VTX-MC-BK
3 pack for 12 W x 24 H
graphic: TB-ACE-3
TABLE ACEMINI TABLETOP BANNER STANDS
A series of 3 different sized tabletop stands.
3 pack for 6 W x 12 H
graphic: TB-ACE-1
3 pack for 6 W x 24 H
graphic: TB-ACE-2
BREEZERETRACTABLE TABLETOP
BANNER STANDA great idea for custom calendars and other promotional banners. Graphic size: 8.375W x 11.25H (+ bleed). Available in Silver.Order ref: BREZ-1-S
Signature 1 3 pockets
8.5 x 11literature
SIG-1
Signature 3 3 pockets
4.25 x 11literature
SIG-3
Signature 4 4 pockets
4.25 x 11literature
SIG-4
Signature 2 2 pockets
8.5 x 11literature
SIG-2
SIGNATURETABLE TOP LITERATURE POCKETS
Sold in packs of 3, Black only.
11
EXPANDING DISPLAY SYSTEMS: COYOTE POPUPS
Fast and easy to assemble, the Coyote Popup display frame is both light weight and strong.
The Coyote popup display system combines strength, reliability and style, making it one of the easiest popups on the market to use. It features several unique advantages over other similar products, including state of the art Rare Earth Neo Magnets on both its channel bars and locking/location systems, making it very quick and simple to erect and take down.
Full display systems are offered in a wide choice of configurations from basic tabletop kits to full 20 long displays. All Coyotes are offered as curved or straight systems, single or double sided and can be combined with either breath taking, virtually seamless graphic mural panels or versatile Velcro friendly fabric panels in your choice of color(s).
Magnetic channel bars simply snap into place in moments to form a rigid structure for your fabric or graphic mural panels.
The OCP molded popup case can be converted to an attractive & useful counter. With a fabric or graphic wrap kit: C2C (kit sold separately, call for details)
Lights are conveniently and securely stored within the OCP lid.
With the Coyote popup, spectacular graphic mural panels are simple to install.
12
EXPANDING DISPLAY SYSTEMS: COYOTE POPUPS
2x3 full height slim-linedisplay system
Footprint dimensions:87.56 H x 73 W x 19.25 D
3x3 full height standarddisplay system
Footprint dimensions:87.56 H x 97.25 W x 25 D
Serpentine full trade show exhibit systemFootprint dimensions:
87.56 H x 217.75 W x 60.5 D
4x3 full height standarddisplay system
Footprint dimensions:87.56 H x 118 W x 36.5 D
Gull-wing full trade show exhibit systemFootprint dimensions:
87.56 H x 231 W X 41 D
Standard Horseshoe full exhibit systemFootprint dimensions:
87.56 H x 113 W x 54 D
Deluxe Horseshoe full exhibit systemFootprint dimensions:
87.56 H x 193.5 W x 59.5 D
3x3 Serpentine full height display system
Footprint dimensions:87.56 H x 89.5 W x 19.5 D
1x1 tabletop kit for desktop presentation.
Footprint dimensions:30.625 H x 45.5 W x 12.5 D
2x1 tabletop kit for larger desk top presentation. Footprint dimensions:
30.625 H x 73 W x 19.25 D
2x2 tabletop kit for maximum desk top presentation. Footprint dimensions:
59.375 H x 73 W x 19.25 D
3x2 tabletop kit for larger desk top presentation. Footprint dimensions:
59.375 H x 97.25 W x 25 D
3x2 Mini tabletop kit Footprint dimensions:
48 H x 74.625 Wx 15.75 D
2x2 Mini tabletop kitFootprint dimensions:
48 H x 53.625 Wx 11.75 D
Coyote Mini displays are approximately 20% smaller than the standard Coyote tabletops. These kits are quick and easy to set up with a few simple steps & provide a great option for a smaller tabletop presentation. The complete display rolls up into a special storage sleeve, which is then placed into a sleek, padded carrying case. Kit includes the frame, channel bars, carry bag, and lights. Add an optional OCS hard case for shipping or extra secure storage.
4x3 Serpentine full height display system
Footprint dimensions:87.56 H x 129.5 W x 19.5 D
13
EXPANDING DISPLAY SYSTEMS & ACCESSORIES: POPUPS
SPYDERPOPUP DISPLAY SYSTEM
The Spyder is quite possibly one of the most advanced popup display systems on the market! It offers the very best in display technology and state of the art materials featuring fully magnetic locking arms, panel hangers and channel bars. Its extremely fast to assemble the internal web cross bracing provides additional strength and rigidity for a nearly unbeatable finished appearance.
Only available as 3X3 and 4X3 curved exhibit kits with fabric panels in your choice of color(s), as shown below, or as full graphic mural kits as shown at left.
The Spyder offers extremely fast assembly with a strong, rigid frame.
4X3 kit with fabric panels3X3 kit with fabric panels
COYOTE INTERNAL SHELF KITOur professionally finished internal shelf kit offers you the option of presenting products or marketing literature directly from the front face of your Coyote popup display. The shelf kit assembles in minutes and comes complete with two clear acrylic shelves, which can be used either horizontally or at 45 degree angles. Max. capacity per shelf is 15 lbs., max. per quadrant is 45 lbs. (Only available for use with a curved Coyote popup display. Shelf kit does not fit into an OCP oval molded popup case).
COYOTEBUBBLE PANEL
OPTIONAdd a new dimension to your Coyote Popup display system with a forward facing, convex bubble panel. Panel can be fabric, OPAQUE graphic or even a rear illuminated graphic. (Lighting kits for rear illuminated bubble panel, sold separately).
OPTIONAL LIGHTINGThe Lumina 200 and Lumina 7 offer a good, all around solution for illuminating your Coyote or Spyder popup exhibit.
10 kit8 kit
Panel and hardware can be stored with display in conventional OCP oval molded popup case.
14
SEAMLESS EXHIBIT PANELS: HERO
HEROPREMIUM SEAMLESS EXHIBIT PANEL KITS
Hero portable folding panels offer the convenience of folding panels with elegant, seamless panel construction. This system offers concealed hinges, lightweight durability and superb craftsmanship. Panels are constructed of an ultra light core material and covered on both sides with polyester fabric in your choice of color(s). Full height exhibits can be used separately as two tabletop units! The unique 2 radius curved ends lend a polished appearance.
Vibrant, backlit header panels add visual excitement to your display. A zippered storage bag is available as an option: H-BAG
HERO MOLDED CASEStore and transport your Hero panel exhibit in this optional molded hard case. Order ref: OCH
HERO H02-1TABLETOP DISPLAY
HERO H02-2TABLETOP DISPLAY WITH
CURVED ENDCAPS
HERO H10
HERO H03TABLETOP DISPLAY WITH
BACKLIT HEADER BACKLIT HEADER
HERO H04TABLETOP DISPLAY WITH BACKLITHEADER AND CURVED ENDCAPS
HERO H05TABLETOP DISPLAY
HERO H06TABLETOP DISPLAY WITH
BACKLIT HEADER
HERO H07TABLETOP DISPLAY WITH BACKLITHEADER AND CURVED ENDCAPS
HERO H08TABLETOP DISPLAY WITH BACKLITHEADER AND CURVED ENDCAPS
15
SEAMLESS EXHIBIT PANELS: HERO
HERO H09FULL HEIGHT EXHIBIT WITH
CURVED ENDCAPS
HERO H12-1FULL HEIGHT EXHIBIT WITH CURVED ENDCAPS
AND BACKLIT HEADER
HERO H14FULL HEIGHT EXHIBIT WITH
CURVED ENDCAPS
HERO H10FULL HEIGHT EXHIBIT WITH CURVEDENDCAPS AND BACKLIT HEADER
HERO H12-2FULL HEIGHT EXHIBIT WITH CURVED
ENDCAPS, COUNTER AND BACKLIT HEADER
HERO H15-1FULL HEIGHT EXHIBIT WITH CURVED ENDCAPS
AND BACKLIT HEADER
HERO H11FULL HEIGHT EXHIBIT WITH
CURVED ENDCAPS
HERO H13FULL HEIGHT EXHIBIT WITH
CURVED ENDCAPS
HERO H15-2FULL HEIGHT EXHIBIT WITH CURVED
ENDCAPS, COUNTER AND BACKLIT HEADER
16
17
SEAMLESS EXHIBIT PANELS: HERO FAST FOLDING DISPLAY PANELS: HORIZON & EFEX
The Horizon series offers a choice of fabric textures and colors for front and back and includes some great free standing display options. Main panel sizes are approximately 2x 3 but custom sized panel displays are available. (Speak with your display supplier regarding color choices)
HORIZON 6SIX PANEL KIT
This floor standing display kit is a great on the road presentation system. Kit comes in a choice of fabric color finishes, header & a carry bag. Choose your fabric colors then order: HZ-6
STANDARD TABLETOP KITThree panels plus a header. Kit comes in a choice of fabric color finishes & a carry bag. Choose your fabric colors then order: HZ-TT-S
DELUXE TABLETOP MASTERKit comes in a choice of fabric color finishes & a carry bag. Choose your fabric colors then order: HZ-TT-M
EFEXECONOMY FOLDING
TABLETOP DISPLAY KITSThe EFEX 28W x 35H panel system is a light-weight, fabric covered tabletop display at real value for money prices. The 2802 model features an additional 12H, full width header.
Panel kits are available in a choice of four basic fabric color combinations: Red/Black, Blue/Grey or Red/Blue and Black/Black. (custom fabric colors or custom sized panels are available on quantity orders). Bag included.2801 Three panel kit: EFX-28012802 Three panel kit with header: EFX-2802
EFX-2801
EFX-2802
HORIZON 8 EIGHT PANEL KIT
Complete back wall with two headers! This kit is a trade show booth on the move with a wide range of fabric color choices. Comes complete with carry bag. Choose your fabric colors then order your kit: HZ-8
FAST FOLDING DISPLAY PANELS: VOYAGER
All units are shown with Velcro detachable graphics. Header options shown with VY-3 and VY-4 are available for all models.
VOYAGERBRIEFCASE
DISPLAY SYSTEMThe Voyager has been specially developed as a briefcase style table top display and is a great choice for promotions on the go. It has a rigid, thermo formed ABS exterior and a black, Velcro compatible fabric interior.
Voyager Mega Kit (large): VY-3Open dimensions: 32H x 48W
CUSTOMIZE! Maximize your marketing efforts! Brand the exterior of your Voyager to match your company and/or product colors. Minimum order of 12 kits required. Call for details.
VY-4
VY-1
VY-2
Voyager Supreme kit (x-large): VY-4Open dimensions: 24H x 64W
Voyager Mini Kit (small): VY-1Open dimensions: 18H x 48W
Voyager Maxi Kit (medium): VY-2Open dimensions: 24H x 48W
VOYAGER CARRY BAG Carry your Voyager hands-free by adding a water-resistant canvas carrying bag, which stores a header, extra graphics & literature.
Order ref:Voyager Mini: VY-1-BGVoyager Maxi: VY-2-BGVoyager Mega: VY-3-BGVoyager Supreme: VY-4-BG
VY-3
All Voyager systems have a Lifetime Warranty on parts & workmanship. Internal graphics remain on the Voyager during transport. Header options should be removed for transport and storage.
18
WEDGESIGN CLAMP
A cleverly designed, cost effective sign support that is simple to use. Combine multiple Wedge stands together for longer and taller displays. Available only in Black. Graphic size is variable. (Graphics not included)Order ref: WED-B
OCLOCS
THE OCPPOPUP AND GENERAL PURPOSE TRANSIT CASE
The OCP incorporates state of the art blow molding technology to create a strong yet lightweight case.
THE OCS AND OCLGRAPHIC AND ACCESSORY SHIPPING CASES
Protect your investment by storing and transporting your exhibit and graphics in our high quality molded cases. The OCS and OCL graphic and accessory shipping cases are tough, blow molded cases that offer maximum protection for your trade show graphics. Available in two sizes, with reliable built in wheels and an easy to grip molded handle.
Small molded graphic case (interior dimensions: 14 diameter X 39.5H): OCS
Large molded graphic case (interior dimensions: 14 diameter X 50.75H): OCL
Features include reliable built in wheels, handle and internal storage in the lid for standard flood lights or accessories. Order ref: OCP
The OCP Molded case converts easily into an attractive and useful counter! Case to counter fabric conversion (choice of fabric colors): OCP-C2C-F
Graphic at left illustrates the use of multiple Wedge stands.
A single Wedge system is shown above.
SYNERGYA double-sided, aluminum A frame signboard that features easy snap edge technology with a Silver anodized finish. The Synergy accepts graphics of 22.75W x 32.5H (+ bleed) Order ref: SYN-2-1
19
MOLDED CASES & ACCESSORIES
LITERATURE RACKS
ZEDUP 2DOUBLE WIDE COLLAPSIBLE
Easy to use 6 pocket literature rack collapses and packs away for ease of transportation. Double width units in textured Black or high shine Silver. Hard case is included. In Black: ZD-2-B In Silver: ZD-2-S
ILLUSIONCOLLAPSIBLE
A fast-folding cantilever rack with 4 front facing pockets. A carry bag is included.Illusion 1 single width in Black: IL-1-B, in Silver: IL-1-SIllusion 2 double width in Black: IL-2-B, in Silver: IL-2-S
We offer a wide range of trade show literature racks in three styles: fully collapsible racks, an excellent choice if transportation is your biggest issue; flat packs and modular styles which snap apart for ease of packing.
ZEDUP 1COLLAPSIBLE
An easy to use 6 pocket literature rack that collapses and packs away for ease of transportation. Available in textured Black or high shine Silver. A soft carry bag is included.ZedUp 1 single width in Black: ZD-1-BZedUp 1 single width in Silver: ZD-1-S
CASCADECOLLAPSIBLE
A modern design, front facing collapsible literature rack that features durable, scratch resistant polycarbonate literature pockets. Unit can be stored or shipped loaded with literature for added convenience. Cascade is quick and easy to set up and take down and comes complete with a carry bag: CAS-1 ZedUp 1 with optional
hard case upgrade.
Black unit w/case: ZD-1-HC-BSilver unit w/case:ZD-1-HC-S
20
LITERATURE RACKS
INNOVATEMODULAR
The modular design of this 10 pocket rack allows you to pack the unit in 3 separate parts for reduced shipping size. Carry bag included. Textured Black: INN-BHigh shine Silver: INN-S
ZEDUP LITECOLLAPSIBLE
A lightweight version of the ZedUp. Constructed from aluminum and plastic for reduced weight. Hard carry case included.Available only in Silver: ZD-LITE
10 UP FLAT PACK
Strong and stable unit with 10 pockets in a striking Black and Silver combo. Packs flat. Carry bag included: 10UP-B
SLOPEFLAT PACK
Stylish and elegant, for impact in any surrounding. Packs flat, bag included. Black: SLP-B Silver: SLP-S
REVEAL PROMODULAR
Easy to use roll-up mesh literature rack that assembles in seconds. Holds standard 8.5 x 11 literature in either a 4 or 8 pocket model. Bag included.4 pocket Black: REV-PR-B Silver: REV-PR-SEight pocket model in Silver: REV-PR-2-SEight pocket model in Black: REV-PR-2-B
TITANMODULAR
Heavy duty 8 pocket rack, splits into 3 parts for shipping. Robust design is ideal for corporate receptions or outdoor road shows. Black only: TITN-B
JAZZMODULAR
An attractive rack with 3 angled pockets that allow you to present either landscape or portrait literature. Carry bag included.Black: JAZ-B Silver: JAZ-S
VICTORYMODULAR
Slim and attractive with 5 front facing pockets and a snap together design. Carry bag included. Textured Black finish: VIC-B Silver: VIC-S
VY-3
21
The Orbital Express Truss System requires NO TOOLS for set up! Installation couldnt be easier, simply twist & lock. The specially designed connectors are simple to use, strong & secure. Our truss kits can be reconfigured in multiple ways using the same parts. Have a different exhibit for each show! We offer more than 41 professionally designed off the shelf kits for a variety of booth sizes and configurations. Each kit comes complete with all the parts, fixtures and fittings you need to create a successful exhibit, including (depending on the kit) low voltage spotlights and adjustable tabletops.
22
ORBITAL EXPRESS 10X10 TRUSS KITS
ARA VELA
CETUS LYRA
CARINA CASTOR23
ORBITAL EXPRESS 10X10 TRUSS KITS
CYGNUS PLUTO
PAVO SIRIUS
MARS MERCURY24
25
ORBITAL EXPRESS 10X10 & 10X20 TRUSS KITS
LYNX CEPHEUS
THETA HYDRUS
PICTOR INDUS25
26
ORBITAL EXPRESS 10X20 TRUSS KITS
ANTARES SATURN
ELECTRA PHOENIX
POLARIS OMICRON26
27
ORBITAL EXPRESS 10X20 & 20X20 TRUSS KITS
ANDROMEDA ARCTURUS
VENUS MAGELLAN
DRACO LEO27
28
ORBITAL EXPRESS 20X20 TRUSS KITS
DORADO CORVUS
CENTAURUS ALTAIR
CANIS TUCANA28
29
ORBITAL EXPRESS 20X20 TRUSS KITS & CASES
ORION VEGA
CASSIOPEIA NEPTUNE
JUPITER 29
OPTI-MOUNT TILTING LCD & PLASMA SCREEN
MOUNTING BRACKETSLCD mounting brackets that provide easy fingertip adjustment of viewing angles up to a 30. Available only in a silver finish.
Opti-mount 1 (15-30 LCDs): OR-LCD-1-SMaximum weight capacity: 30 lbs.
Opti-mount 2 (14-40 LCDs): OR-LCD-2-SMaximum weight capacity: 80 lbs.
Opti-mount 3 (30-50 LCDs): OR-LCD-3-SMaximum weight capacity: 130 lbs.
OPTI-MOUNT 2OPTI-MOUNT 1 OPTI-MOUNT 3
30
ORBITAL EXPRESS TRUSS ACCESSORIES
Silver finish right facing: OR-TBL2-R-S, Wood finish right facing: OR-TBL2-R-WDDark wood finish right facing: OR-TBL2-R-DWD, Black finish right facing: OR-TBL2-R-B, Silver finish left facing: OR-TBL2-L-S, Wood finish left facing: OR-TBL2-L-WD,Dark wood finish left facing: OR-TBL2-L-DWD, Black finish left facing: OR-TBL2-L-B
30
LAMINATE TABLETOPSFully adjustable standard tabletops in your choice of hard wearing laminate finishes. Silver: OR-TBL-S, Wood: OR-TBL-WD, Dark wood: OR-TBL-DWD, Black: OR-TBL-B
FREESTANDING ORBITAL TRUSS TABLES TRUSS ACCESSORY
Complete your truss display with any of these attractive and useful tables that can be used alone, or grouped together. The hard wearing laminate tops are offered in your choice of finishes. Call for details.
Tables can be combined to create an attractive reception counter!
90 curved truss table: OR-CT-3
Half Yin/Yang, left facing: OR-CT-1Half Yin/Yang, right facing: OR-CT-6
Triangular: OR-CT-2
Full Yin/Yang: OR-CT-5
Rectangular: OR-CT-4
31
ORBITAL EXPRESS TRUSS ACCESSORIES
LITERATURE RACK
TRUSS ACCESSORYA sensational 10 pocket clamp-on literature rack with a sleek design. Note: rack may not fit into the standard kit packaging solution/molded case: OR-STG
INTERNAL SHELVING TRUSS ACCESSORYOptional 90 internal shelving solutions are available in 3 widths and several laminated finishes, including dark wood and Black. Call for details.24 span in Silver: OR-IS-24-S 24 span in wood (as shown): OR-IS-24-WD 36 span in Silver (as shown): OR-IS-36-S 36 span in wood: OR-IS-36-WD46 span in Silver: OR-IS-46-S 46 span in wood: OR-IS-46-WD
Curved shelving available for 45 curved sections, call for details:OR-CIS-45-S (Silver) OR-CIS-45-WD (Wood)
OASISEXHIBIT BAG HOLDER
A handy and highly portable, three arm collapsible bag dispenser with a shiny silver finish. Order ref: OASIS
31
OCFRECTANGULAR FREIGHT CASE
Like the OCT, the OCF is designed for heavy use with national and international exhibit freight shipments. Both cases offer maximum protection for your exhibit materials, are stackable and can be moved using the built-in casters or with a forklift.
OCTROUND FREIGHT CASE
A large, round, general purpose freight case designed to handle national and international exhibit freight shipments. The OCT case offers maximum protection for your exhibit materials, is stackable and can be moved using the built-in casters or with a forklift.
LEADERPEDESTRIAN GUIDANCE SYSTEM
Each barrier can be linked to the next for the purpose of directing traffic flow. Max. length of each belt is 82. The heavy steel bases features a non-skid bottom. Sold as a set of 2 units as shown. Order ref: LDR-R-1
LINEAR 10X10 DISPLAY KITS
LINEARSPEED-LINE TABLETOP & PORTABLE EXHIBITS
The Linear System combines the looks, style and sophistication of a semi custom exhibit, with the ease, convenience and value for money trade price that youre looking for. The Linear range of portable exhibits is designed to ship with minimal lead time and is a terrific off the shelf solution for tradeshows and semi permanent displays. Choose from our wide selection of fast ship standard 10 and 20 linear kits, all supplied ready to use complete with structure, integrated tables and lighting in a UPS compliant molded case. Add a vinyl or inkjet printed graphic installation is a breeze and the light weight, sturdy construction is strong enough to support a 21 LCD.
LINEAR AA TABLETOP DISPLAY KIT: LN-K-TT-AA
LINEAR BB TABLETOP DISPLAY KIT: LN-K-TT-BB
LINEAR CC TABLETOP DISPLAY KIT: LN-K-TT-CC
LINEAR DD TABLETOP DISPLAY KIT: LN-K-TT-DD
LINEAR EE TABLETOP DISPLAY KIT: LN-K-TT-EE
LINEAR FF TABLETOP DISPLAY KIT: LN-K-TT-FF
LINEAR GG TABLETOP DISPLAY KIT: LN-K-TT-GG
LINEAR HH TABLETOP DISPLAY KIT: LN-K-TT-HH
32
LINEAR A 10x10 DISPLAY KIT: LN-K-10X10-A
LINEAR B 10x10 DISPLAY KIT: LN-K-10X10-B
LINEAR C 10x10 DISPLAY KIT: LN-K-10X10-C
LINEAR D 10x10 DISPLAY KIT: LN-K-10X10-D
LINEAR E 10x10 DISPLAY KIT: LN-K-10X10-E
LINEAR F 10x10 DISPLAY KIT: LN-K-10X10-F
LINEAR G 10x10 DISPLAY KIT: LN-K-10X10-G
LINEAR H 10x10 DISPLAY KIT: LN-K-10X10-H
LINEAR I 10x10 DISPLAY KIT: LN-K-10X10-I
LINEAR J 10x10 DISPLAY KIT: LN-K-10X10-J
LINEAR 10X10 DISPLAY KITS
33
34
LINEAR K 10x20 FULL DISPLAY KIT: LN-K-10X20-K
LINEAR L 10x20 FULL DISPLAY KIT: LN-K-10X20-L
LINEAR M 10x20 FULL DISPLAY KIT: LN-K-10X20-M
LINEAR N 10x20 FULL DISPLAY KIT: LN-K-10X20-N
LINEAR O 10x20 FULL DISPLAY KIT: LN-K-10X20-O
LINEAR P 10x20 FULL DISPLAY KIT: LN-K-10X20-P
LINEAR Q 10x20 FULL DISPLAY KIT: LN-K-10X20-Q
LINEAR R 10x20 FULL DISPLAY KIT: LN-K-10X20-R
LINEAR S 10x20 FULL DISPLAY KIT: LN-K-10X20-S
LINEAR T 10x20 FULL DISPLAY KIT: LN-K-10X20-T
LINEAR 10X20 DISPLAY KITS
LINEAR ACCESSORIES: MONITOR KIOSK KITS
35
LINEAR MONITOR KIOSK KITS
Sleek & attractive monitor kiosks that are quick and easy to assemble. Kits offer different options, including literature pockets, tables and contour cut graphic substrates to match your Linear display (graphics not included). Each kit comes standard with a 2 section upright post with a decorative cap, an LCD mounting bracket, PC shelf and all necessary mounting hardware.
Monitors not included with kits.
Kit 5 includes:2 section post with cap2 tables2 PC shelves2 LCD mounting brackets4 contour cut graphic substratesall necessary hardwareOrder ref: LN-MK-5
Kit 1 includes:2 section post with cap1 PC shelf1 LCD mounting bracketall necessary hardwareOrder ref: LN-MK-1
Kit 4 includes:2 section post with cap1 table1 PC shelf1 LCD mounting bracketall necessary hardwareOrder ref: LN-MK-4
Kit 3 includes:2 section post with cap2 tables2 PC shelves2 LCD mounting brackets2 literature pockets2 contour cut graphic substratesall necessary hardwareOrder ref: LN-MK-3
Kit 2 includes:2 section post with cap1 table1 PC shelf1 LCD mounting bracket2 literature pocketsall necessary hardwareOrder ref: LN-MK-2
36
LUMINA FLD CASE EVA semi-rigid lighting case w/foam-lined padded compartments. Stores (2) lights. Designed for use with Lumina models 1-5.Order ref: FLD-CASE
LUMINA SPT CASE This padded EVA formed case is an ideal way to store and protect your lighting investment. Holds any 2 Lumina spotlights and power supplies. Order ref: SPT-CASE
ACCESSORIES
OBSERVE PROVERSATILE SNAP TOGETHER
SIGNPOST SYSTEMA versatile, light weight snap together design featuring a 12 diameter base, stylish curved header and an adjustable brochure holder. Both accept 8.5W x 11Hmaterials. The molded sign clamp will hold an 1/8 thick mounted graphic.Order ref: OBS-LP-SYS
OBSERVE GRANDHEAVY DUTY PEDESTRIAN INFO
CENTERA sleek info center that includes a sturdy base and adjustable shelf. Graphic size: 22W x 28H (+bleed) x 1/4 thickObserve Grand in Silk Black: OBG-B
TRAPPA POSTER FRAMESSilver Anodized poster frames with precision mitered corners that snap open from the front for quick and easy graphic changes. System features a set of spring-loaded aluminum extrusions mounted to a high-impact polystyrene backer.
SYNTHESIS FAST-MAG LIGHTBOXESWall mountable lightbox, featuring a magnetic aluminum frame. Kits include built-in bulbs, connecting cable and 110 volt UL approved transformer with back & side plug ports.
SYNTHESIS PRO LIGHTBOXESWall mountable or tabletop lightbox, featuring an edge-lit acrylic frame. Kits include built in bulbs, connecting cable and 110 volt UL approved transformer. Synthesis 3 for tabletop use only, Synthesis 4 wall mount only.
Frames are available in a wide range of standard sizes & come complete with a clear protective lens.
SYNTH-FM-1 (graphic size: 8.25H x11.625W)
SYNTH-FM-2 (graphic: 11.625H x 16.5W)SYNTH-PR-1 (graphic size: 8W x 6H)
SYNTH-PR-2 (graphic size: 10.5W x 8H)SYNTH-FM-3 (graphic: 16.5H x 23.375W)
SYNTH-FM-4 (graphic: 23.375H x 33.125W)SYNTH-PR-3 (graphic size: 12.75W x 9.25H)
SYNTH-PR-4 (graphic size: 20W x 14.25H)
LUMINA 1Low voltage 50 watt spot light with stylish goose neck arm. Available in both Silk Black and deluxe Chrome finishes. Mounts horizontally. Order ref: Silk Black LUM-1-B, Chrome: LUM-1-C
LUMINA 3Low voltage, 50 watt Chrome spotlight with a stylish Black head and telescopic arms. Extends from 7-22 long. Order ref: LUM-3
LUMINA 4Low voltage, 50 watt Chrome spotlight with a deluxe ringed head and telescopic arms. Extends from 7-22 long. Order ref: LUM-4
LUMINA 2Low voltage 35 watt slender spot light which mounts to a vertical pole and is only available in an attractive brushed stainless steel finish. Order ref: LUM-2
LUMINA 5Low voltage, 50 watt spotlight with a deluxe Chrome head and telescopic arms. Extends from 7-22 long. Order ref: LUM-5
LUMINA 6Low voltage, 50 watt spotlight with stylish curved twin arms. Available in Silk Black only. Order ref: LUM-6
LUMINA 7Incandescent 110v fixture with a dovetail mount. Shown with an optional 50 watt spotlight. Available in Silk Black only. Order ref: LUM-7
LUMINA 812 Volt spotlight with straight arm and adjustable head. Light includes 110 volt UL approved transformer, 50 watt bulb and universal fittings kit. 17 long (431.8 mm) from end to end. Order ref: LUM-8-B Silk Black, LUM-8-C Painted Silver
LUMINA 912 Volt spotlight with straight arm and adjustable head and tail. Light includes 110 volt UL approved transformer, 50 watt bulb and universal fittings kit. 19.5 long (495.3 mm) from end to end. Available in a painted Silver finish. Order ref: LUM-9
LUMINA 1012 Volt spotlight with straight arm and adjustable head and tail. Light includes 110 volt UL approved transformer, 50 watt bulb and universal fittings kit. 20 long (508 mm) from end to end. Order ref: LUM-10 Available in a painted Silver finish.
LUMINA 1112 Volt spotlight with straight arm and adjustable head and tail. Light includes 110 volt UL approved transformer, 50 watt bulb and universal fittings kit. 19 long (482.6 mm) from end to end. Order ref: LUM-11 Available in a painted Silver finish.
LUMINA 1212 Volt spotlight with focus angle arm and adjustable head and tail. Light includes 110 volt UL approved transformer, 50 watt bulb and universal fittings kit. 18.5 long (470 mm) from end to end. Order ref: LUM-12-C Arm is a painted Silver finish, head is a high shine Chrome finish.
LUMINA 13 12 Volt spotlight with straight arm and adjustable head and tail. Light includes 110 volt UL approved transformer, 50 watt bulb and universal fittings kit. 20 long (508 mm) from end to end. Available in a painted Silver finish. Order ref: LUM-13
LUMINA 200110 Volt ETL approved wall- washer floodlight with a straight arm and adjustable head. Light includes 200 watt halogen bulb. 19.5 long (495.3 mm) from end to end. Available in a Silk Black finish. Order ref: LUM-200-ORL
37
LUMINA SPARE BULB KIT(2) 50 watt low voltage spare bulbs in a padded, protective EVA formed case. Order ref: LUM-BULB
UNIVERSAL LIGHT CLAMP KIT
Comes standard with the Lumina 1,3,4,5 & 6 & allows our lights to fit a majority of banner, truss & panel systems. Order ref: UNI-LT-CLP
REQUEST A FULL CATALOG OF LUMINOSITY LIGHTING SOLUTIONS
SEE ALL THE PRODUCTS AT:WWW.LUMINOSITY-LIGHTING.COM.
2TABLE OF CONTENTS
BANNER STANDS | RETRACTABLE .............................................................1-3
BANNER STANDS | TENSION POLE & TELESCOPIC......4-5
OUTDOOR PRODUCTS............................................................................................................6-7
DFA | ECONOMY DISPLAY PRODUCTS .................................................8-10
BACKWALLS & INFO CENTERS.............................................................................11
EXPANDING DISPLAY SYSTEMS............................................................12, 14-15
CASES ..................................................................................................................................................................13
FORMULATE | TENSION FABRIC..........................................................................17
FOLDING DISPLAY PANELS................................................................................... 18-21
LINEAR DISPLAY SYSTEMS..................................................................................22-25
ORBITAL EXPRESS TRUSS ....................................................................................26-36
TABLETOP PRODUCTS.........................................................................................................37
LITERATURE RACKS ...........................................................................................................38-39
DISPLAY ADDITIONS...................................................................................................................40
LUMINOSITY | DISPLAY LIGHTING.....................................................................41
SYMBOLS USED THROUGHOUTTHE EXHIBITORS HANDBOOK
premium productproduct can be recycled(does not include graphic application)
affordable productnew addition toThe Exhibitors Handbook
economy productproduct comes with a carry bagor case
1ImAGINE
- variable height=29.5 - 83.35- graphic tensioner- anti-slip strips along base- telescopic pole- integrated pole storage- interchangable graphic
cassette- shown with printed graphic
base strip
IMG
BANNER STANDS | RETRACTABLE
customize yourImagine or Advancebanner stand basewith a graphic basestrip printed on 22milopaque PVC
features aremovablegraphic cassettefor quick andeasy graphicchanges
2EXCALIBUR
- variable height=29.5 - 83.35- double sided- graphic tensioner- integrated pole storage- telescopic pole
- variable height=29.5 - 83.35- double sided- graphic tensioner- anti-slip strips along base- integrated pole storage- interchangable graphic cassette- telescopic pole
- standard height=83.25- features a gunmetal anodized
body & cast chrome end plates- roller access via flip top lid &
removable self-locking graphicroller mechanizm
- quick change graphic slider- adjustable feet on base are useful
on uneven floors- 3-piece bungee corded pole &
premium top rail
EXC
BARRACUDA
- variable height=29.5 - 83.35- graphic tensioner- integrated pole storage- telescopic pole
BCD BLD-LX-GRY
ADVANCE
BLADE LX
ADV
BANNER STANDS | RETRACTABLE
3ORIENT
- standard height=83.25- anodized silver or black- molded end plates- 3-piece bungee corded pole
PACIFIC
- standard height=83.75- anodized silver- molded end plates- swivel-out foot- 3-piece bungee corded pole
PAC-800-S
PAC-920-S
PAC-1000-S
black: CN-48-B
silver: CN-24-Sblack: CN-24-B
silver: ONT-800-Sblack: ONT-800-B
silver: ONT-DBL-800-Sblack: ONT-DBL-800-B
silver: CN-30-Sblack: CN-30-B
silver: ONT-920-Sblack: ONT-920-B
silver: ONT-DBL-920-Sblack: ONT-DBL-920-B
silver: CN-36-Sblack: CN-36-B
silver: ONT-1000-Sblack: ONT-1000-B
silver: ONT-DBL-1000-Sblack: ONT-DBL-1000-B
CONTENDER
- standard height=77.5 or 105 highwith optional 4th pole
- swivel-out foot- powder coated silver or black finish- laser cut steel ends & swaged pole- made in the U.S.A.
ORIENT 2
- standard height=83.25- double-sided- anodized silver or black- molded end plates- 3-piece bungee corded pole
BANNER STANDS | RETRACTABLE
4LIGHTNING
- standard height=77- snap-lock graphic rails- 3-piece bungee corded pole
LTNG
BANNER STANDS | TENSIO
N POLE
5DASHMEGA 1 & 2
- variable height=up to93.5
- stable, anodized aluminum- quick & easy to erect
DASH LITERATURE pocket
- graphic height=44- separate 3 pocket literature
dispenser option to attach toa Dash unit
single sided: DSH-M-L-1double sided: DSH-M-L-2
single sided: DSH-MEdouble sided: DSH-ME-2
BANNER STANDS | TELESCOPIC
UNO
- variable height=35 -85.5
- powder coated blackweighted base
UN-1-ST
UN-1-MG
UN-1-MO
DASH 1 & 2
- variable height=up to 78.5- stable, anodized aluminum- quick & easy to erect
single sided: DSH-M-1double sided: DSH-M-2
PEGASUS
PEGASUSMINI
- both feature variableheight=36 - 96
- backwall or backdrop- single or double sided- dual telescopic poles
silver: PGSUS-Sblack: PGSUS-B
silver: PGSUS-MIN-Sblack: PGSUS-MIN-B
6OUTDOOR PRODUCTS
WIND DANCERWIND DANCERLT
- adjustable height=up to 17 3- flag is approximately 36 wide- hollow base can be filled with either water or sand as weighing agent- easy to position, erect, and remove
- adjustable height=up to13 6
- hollow base can be filled with either water or sand asweighing agent
- easy to position, erect, andremove
WIND-MXWIND-LT
- hollow base can be filled with either
- easy to position, erect, and remove
BLAST
- display up to 5 flags simultaneously
- bungee corded polesfabricated from hybridaluminum/steel
- powder coated steel base
- comes with 4 ground spikes & rubber mallet
BLST
WIND DANCER SPIRE
- adjustable height=up to17 3 tall
- allows a standard WindDancer to be convertedto a double-sided V shape banner
- Wind Dancer Spireconversion is notintended for outdooruse
Wind Dancer Lanyardallows a standard WindDancer or Wind DancerLT to be converted intoa flagpoleWND-MX-FPCK
WIND-MX-FPCK2
- easy to position, erect, and remove- easy to position, erect, and
SPINNAKER
- portable outdoorbillboard
- maximum graphic areaof 8 w x 8 h (weather& wind conditionspermitting)
- single or double sided- units can be linked
together for addedimpact
SPKR
Wind Dancer Lanyardallows a standard Windallows a standard Windallows a standard WindDancer or Wind DancerDancer or Wind Dancer
7OUTDOOR PRODUCTS
WHIRLWIND
- front-loading snap framesconstructed from aluminum& powder-coated steel
- includes clear lens cover- quick & easy graphic changes- dual-spring design flexes to
withstand wind gusts- compact durable base can
be filled with water or sand for extra stability
- comes with wheels for easyinstallation & removal
WHRL-WND
WHIRLWINDROCKET
- 3 legs can be filled with water or sand
- single or double sided- spring-loaded graphic support
1/8 coroplast plastic or similarsubstrate recommended
- product ideal for contour cutcustom graphics
- graphic size may vary
RCKT
ZOOM
- can be used indoorsor out
- graphic rotates in wind- water fillable donut
adds stability- graphic printed on flag
material- double sided graphic is
available- both floor base &
ground stake included
ZOOM
STORM PRO
- variable height= 61.5 or 86- excellent strength and
stability- hollow fillable base- telescopic support pole &
central hub- graphic can rotate horizontal
or vertical(graphic does not rotatewhen set to maximum height)
single sided: STRM-PRdouble sided: STRM-PR2
MONSOON
- semi-portable double-sided billboard- strong frame is quick & easy to assemble- includes ground stakes & bungee rope- banner & grommets not included
MONSN-2
- semi-portable double-sided billboard- strong frame is quick & easy to assemble- includes ground stakes & bungee rope- banner & grommets not included
STORM PRO
SPINNAKER
CAMPAIGN
- quick assembly- strong & easy to
clean plastic parts
CP-B1
- quick assembly- strong & easy to
clean plastic parts
OUTDOOR
8DFA | ECONOM
Y DIS
PLAY PRODUCTS
RETRACTOR 1
- standard height=78.75
RTRC-1 RETRACTOR 2
- standard height=77.5
RTRC-2RETRACTOR 4
- standard height=78.25
RTRC-4
TELESCOPIC 1
- variable height=36 -70
TEL-1 TELESCOPIC 2
- variable height=60.25 -89
TEL-2 TELESCOPIC 3
- variable height=60.25 -89
TEL-3 TELESCOPIC 4
- standard height=77
TEL-4
TELESCOPIC 4
RETRACTOR 2RETRACTOR 4
RETRACTOR 5
- standard height=79.375- velcro graphic application
RTRC-5
DFA (Direct from Asia) is our range of super economy banner stands & displaysolutions. Unlike most of our other products which are designed and developed byour team of display specialists in the U.S.A, the DFA range of indoor and outdoorproducts represents the best of the best choice from a selection of independentdisplay producers located across the length and breadth of Asia.
9SPRING 1-1
- height=59 or 78.5
SB-1-1
SPRING 4
- standard height= 60- #3 grommets in corners
SPRING 1-2
- height=59 or 78.5
SB-1-2
SPRING 5
- standard height=78.5- indoor or outdoor use
SB-5
SPRING 1-3
- height=59 or 78.5
SB-1-3
SPRING 6
- standard height=63- #3 grommets in corners
SB-6
SPRING 3
- standard height= 70.75- #3 grommets in corners
SB-1-3
SPRING 7
- variable height=61.5 -69- #3 grommets in corners
SB-7
DFA | ECONOM
Y DIS
PLAY PRODUCTS
TELESCOPIC 4
RETRACTOR 5
DFA products provide the same basic functions and reliability,yet offer the cost effective advantage of a lighter and simplerconstruction, making them a very economic choice.
All DFA banner stands are both economical and eco-friendly.
SB-4
10
TT
- lightweight, fabric coveredtabletop display
- available in 2 front & backcolor combinations: black/grey, blue/grey(shown with optionalgraphic panels)
- lightweight, fabric covered- lightweight, fabric coveredtabletop displaytabletop display
- available in 2 front & back- available in 2 front & backcolor combinations: black/color combinations: black/grey, blue/greygrey, blue/grey(shown with optional(shown with optionalgraphic panels)graphic panels)
DFA | ECONOM
Y DIS
PLAY PRODUCTS
4 pocket: LR-18 pocket: LR-2
black & grey: TT-D-4-BK/GRYblue & grey: TT-D-BL/GRY
LR 1 & LR 2
- modular, roll-up mesh design- assembles in seconds- holds standard 8.5 x11
literature- 4 or 8 pocket model- black finish
- variable height=48 - 72- top scrolling mechanism
allows for a variety of lengthsand styles
- utilizes standard 110v power
SCroller 1
SC-1
11
BACKW
ALLS & IN
FO CENTERS
Aero
- indoor/outdoor modular displaysystem
- adjustable heights & angles- kit includes 4 light fittings & bags- shown with optional Lumina 200
floodlights, sold seperately- available la carte to create more
combinations
kit comes completeas shown above
shown with additional panels and lights
AERO
OBSERVE OBSERVE PRO
- sleek info center includessturdy base & adjustableshelf
- lightweight snaptogether design
- 12 diameter base- stylish curved
header- adjustable
brochure holder- accepts 8.5 x
11 graphic andliterature
- molded sign clampwill hold an 1/8 thick mountedgraphic
OBG-B OBS-LP-SYSOBS-LP-SYSGRAND
12
EXPANDIN
G DIS
PLAY SYSTEM
S
- fully magnetic popup display system providinggraphic or fabric backwall
- available in a wide range of size configurations (see page 15)
13
CASES
OCP ELITE
- heavy duty shipping andstorage case
- lid can be used as a stepstool while assemblingdisplays
- access door providesstorage when unit isused as a counter
- UPS approved
OCS AND OCL
- blow molded moldedcases for exhibits &graphics
- reliable built in wheels- easy-to-grip molded
handles- secure reinforced straps
help to assure case willremain closed duringtransport
small: OCSlarge: OCL
Roll Wrap
Roll Wrap
Stretch Wrap
Stretch Wrap
- stretch fabric pullover- converts OCP to counter
- stretch fabric pullover- converts OCP Elite to counter
CASE TO COUNTER CONVERSION
CASE TO COUNTER CONVERSION
- available in fabric or graphic- converts OCP to counter
- available in fabric or graphic- converts OCP Elite to counter
- protects banner & lights from roughabuse when being shipped
- double wall construction, high densityinternal foam padding, recessed wheels,integrated hinges, & double or singlebanner capacity
- lockable side handle, padded shoulderstrap and an end-pull handle
OCP
- general purpose transit case- blow molding makes case
strong yet lightweight- built in wheels, handle, & light
storage in the lid- secure reinforced straps help
to assure case will remainclosed during transport
OCB
14
BubblePanel
- forward facing, convex panel- panel can be fabric, opaque graphic or
rear illuminated graphic (light kit sold separately)- hardware can be stored with display
in OCP
INTERNALSHELF KIT
- present products or literature- comes with 2 clear acrylic shelves to
be used horizontally or at 45 angles- max capacity per shelf=15 lbs, max per quadrant=45 lbs- for use with curved frame only- lighting package available
(not to be stored with display in OCP)
Customize your Coyote display with avariety of optional accessories.
COYOTE OPTIONS
Lumina 200 & Lumina 7 are both good lightingsolutions for your Coyote popup exhibit
(see page 41)
- approx. 20% smaller than standard Coyote tabletops- entire display rolls up into special storage sleeve
which is placed into padded carry case- kit includes frame, channel bars, carry case, & 2 lights- add an optional OCS hard case for shipping or extra
secure storage
2x2 mini tabletop kitfootprint dimensions:
48 h x 53.625 w x 11.75 d3x2 mini tabletop kitfootprint dimensions:
48 h x 74.625 w x 15.75 d
EXPANDIN
G DIS
PLAY SYSTEM
S
MONITOR MOUNT
- allows you in combine print and digital imagesto strengthen your message
- fully integrated into straight or curvedCoyote systems
- one panel will be cut to fit the monitor and feet
- LCD max size=32(not recommended for plasma or CRT units)
15
2x3 full heightslim-line display systemfootprint dimensions:
87.56 h x 73 w x 19.25 d
3x3 full heightstandard display systemfootprint dimensions:
87.56 h x 97.25 w x 25 d
serpentine full trade show exhibit systemfootprint dimensions:
87.56 h x 217.75 w x 60.5 d
4x3 full heightstandard display systemfootprint dimensions:
87.56 h x 118 w x 36.5 d
gull-wing full trade showexhibit system
footprint dimensions:87.56 h x 231 w x 41 d
standard horseshoefull exhibit system
footprint dimensions:87.56 h x 113 w x 54 d
deluxe horseshoefull exhibit system
Footprint dimensions:87.56 h x 193.5 w x 59.5 d
3x3 serpentinefull height display system
footprint dimensions:87.56 h x 89.5 w x 19.5 d
1x1 tabletopfootprint dimensions:
30.625 h x 45.5 w x 12.5 d
2x1 tabletopfootprint dimensions:
30.625 h x 73 w x 19.25 d
2x2 tabletop kitfootprint dimensions:
59.375 h x 73 w x 19.25 d
3x2 tabletop kitfootprint dimensions:
59.375 h x 97.25 w x 25 d
4x3 serpentinefull height display system
footprint dimensions:87.56 h x 129.5 w x 19.5 d
R02 Steel R03 Charcoal R15 Cinder R01 LavaR08 Merlot R11 Electric Red
R12 Nebula R09 Kelley Green R07 SandR04 Monarch R05 Pacific R06 Indigo
FabrIC CHOICESAll Coyote popup display sytems are available with printed graphic
murals or velcro-friendly fabric panels of your choice.Actual fabric color may vary slightly.
Premier - ribbed exhibit & display fabric
R02 Chrome R11 Chilli PepperR04 Sapphire R01 Carbon R05 Electric BlueR03 Storm
Regal - smooth exhibit & display fabric
EXPANDIN
G DIS
PLAY SYSTEM
S
16
EXPANDIN
G DIS
PLAY SYSTEM
S
HOPUP
- lightweight, heavy duty silver frame- suspends a fabric graphic mural
(end caps also available)- quick & easy setup and pack up- rolling carry bag included with all
units- 3x3 frame pictured is shown with
optional lights
2x1 (60.25 x 31 ) HOP-2X2-S2x2 (60.25 x 60.25 ) HOP-3X3-S3x2 (89.25 x 60.25 ) HOP-3X2-S1x3 (31 x 89.25 ) HOP-1X3-S2x3 (60.25 x 89.25 ) HOP-2X3-S3x3 (89.25 x 89.25 ) HOP-3X34x3 (118.25 x 89.25 ) HOP-4X3
17
FORM
ULATE | TENSIO
N FABRIC
FORMULATEHANGING STRUCTURES
- designed to compliment your Orbital Express truss exhibit- Orbital Express truss kits start on page 26
(Circle hanging structure shown over Draco kit, 20 x20 )
FORMULATE 1
FORMULATE ACCESSORIES
- vertically curved 10 widetension fabric exhibit structure
- multiple accessory options availableincluding accents, shelves, and literaturepockets
- contact your display provider for moreinformation
FMLT-1
TriangleFMLT-HS-T
CircleFMLT-HS-LC
SquareFMLT-HS-SQ
ShieldFMLT-HS-SH
FORMULATE 2
FORMULATE 4
FORMULATE 3
- horizontally curved 10 wide tensionfabric exhibit structure
- horizontally curved 8 wide tensionfabric exhibit structure
- vertically curved 8 wide tensionfabric exhibit structure
An OCL hard storage case and rollingbag is included with all units
FMLT-2
FMLT-4
FMLT-3
18
FOLDIN
G DIS
PLAY PANELS
EFEXHORIZON 8
TABLETOP | STANDARD
HORIZON 6
TABLETOP | DELUXE MASTER
HZ-8
HZ-TT-S
HZ-6
HZ-TT-M
- main panel sizes approximately= 2 x 3- custom sized panel displays are available- shown with optional detachable graphics- available in a variety of fabric color
options on page 19
- 3 panels plus a header- shown with optional detachable graphics- available in a variety of fabric color
options on page 19
- 8 panel kit- complete
backwall with 2headers
- detachablegraphics available
- available in avariety of fabriccolor options onpage 19
- detachable graphics available- available in a variety of fabric
color options on page 19
2801 three panel kit: EFX-28012802 three panel kit w/header: EFX-2802
EFX-2802
EFX-2801
- lightweight, fabric coveredtabletop display, 28 w x 35 h
- available in a choice of 4 basiccolor combinations:
19
HERO H02-1tabletop display
HERO H02-2tabletop display with
curved endcaps
HERO H03tabletop display with
backlit header
HERO H04tabletop display with backlitheader and curved endcaps
HERO H10
HERO H05tabletop display
HERO H06tabletop display with
backlit header
HERO H07tabletop display with backlitheader and curved endcaps
HERO H08tabletop display with backlitheader and curved endcaps
HERO H09full height exhibit
with curved endcaps
HERO H10full height exhibit with curved
endcaps and backlit header
HERO H11full height exhibit with
curved endcaps
HERO H14full height exhibit with
curved endcaps
HERO H12-2full height exhibit with
curved endcaps, counter& backlit header
HERO H15-1full height exhibit with
curved endcaps & backlitheader
HERO H13full height exhibit with
curved endcaps
HERO H15-2full height exhibit with
curved endcaps, counter &backlit header
HERO H12-1full height exhibit with curved
endcaps and backlit header
R02 Steel R03 Charcoal R15 Cinder R01 LavaR08 Merlot R11 Electric Red
R12 Nebula R09 Kelley Green R07 SandR04 Monarch R05 Pacific R06 Indigo
Premier - ribbed exhibit & display fabric
FOLDIN
G DIS
PLAY PANELS
HERO H10
HERo
OCH CASE
- premium seamless exhibit panel kits- convenience of folding panels with elegant, seamless panel
construction- concealed hinge, lightweight durability- unique 2 radius curved ends lend a polished appearance- full height units can be used as two tabletop units- available in a variety of fabric color options- shown with optional detachable graphics
OCHOCH CASE
FabrIC CHOICESAll Hero & Horizon folding display panels are available with detachable
graphic panels or velcro-friendly fabric panels of your choice.Actual fabric color may vary slightly.
R02 Chrome R11 Chilli PepperR04 Sapphire R01 Carbon R05 Electric BlueR03 Storm
Regal - smooth exhibit & display fabric
20
FOLDIN
G DIS
PLAY PANELS TheVoyager has been specially developed as a briefcase
style table top display and is a great choice forpromotions on the go. It has a rigid, thermo formed ABSexterior and a black,Velcro compatible fabric interior.All units are shown withVelcro detachable graphics.Header options shown withV-2 andV-3 models are alsoavailable forV-1.
Brand the exterior of yourVoyager to match your companyan/or product colors & maximize your marketing efforts.Minimum 12 units, call for details.
Voyager Mini bag: VY-1-BGVoyager Maxi bag: VY-2-BGVoyager Mega bag: VY-3-BGVoyager Supreme bag: VY-4-BGVoyager Monster bag: VY-5-BG
VY-3
VY-2
Voyager Mega Kit (large)open dimensions: 32 h x 48 w
closed dimensions: 32 h x 24 w
Voyager Maxi Kit (medium)open dimensions: 24 h x 48 w
closed dimensions: 24 h x 24 w
Voyager Mini Kit (small)open dimensions: 18 h x 48 wclosed dimensions: 18 h x 24 h
Voyager Mega Kit (large)Voyager Mega Kit (large)open dimensions: 32 h x 48 wopen dimensions: 32 h x 48 w
Voyager Maxi Kit (medium)Voyager Maxi Kit (medium)Voyager Maxi Kit (medium)Voyager Maxi Kit (medium)
Voyager Mini Kit (small)open dimensions: 18 h x 48 wclosed dimensions: 18 h x 24 h
VY-1
24 SERIES
VY3
VY2
VY1
VOYAGERCARRY BAG
CUSTOMIZE
21
Detachable graphics allow foreasy changes! Extra graphics canbe stored in the display case andpacked away for easy storage.
Carry your voyager hands-free byadding a water-resistant canvas carrybag with shoulder strap. Stores header,extra graphics & literature.
AllVoyager systems have a limited LifetimeWarranty. Internal graphics can remainon theVoyager during transport. Headeroptions should be removed for transportand storage. VY-4
Voyager Supreme kit (x-large)open dimensions: 24 h x 64 wclosed dimensions: 24 h x 32 w
Voyager Monster kit (xx-large)open dimensions: 32 h x 64 wclosed dimensions: 32 h x 32 w
FOLDIN
G DIS
PLAY PANELS
Voyager Monster kit (xx-large)open dimensions: 32 h x 64 w
Voyager Supreme kit (x-large)Voyager Supreme kit (x-large)Voyager Supreme kit (x-large)Voyager Supreme kit (x-large)Voyager Supreme kit (x-large)Voyager Supreme kit (x-large)open dimensions: 24 h x 64 wopen dimensions: 24 h x 64 wopen dimensions: 24 h x 64 wopen dimensions: 24 h x 64 wopen dimensions: 24 h x 64 wopen dimensions: 24 h x 64 w
VY-5
VY5
VY4
32 SERIES
packed away for easy storage.closed dimensions: 24 h x 32 wclosed dimensions: 24 h x 32 w
22
LIN
EAR | TABLETOP KIT
S- hybrid modular display systems- quick set up- stylish wing design options
LINEAR TABLETOP KITS
Kit AALN-K-TT-AA
Kit EELN-K-TT-EE
Kit BBLN-K-TT-BB
Kit FFLN-K-TT-FF
Kit CCLN-K-TT-CC
Kit GGLN-K-TT-GG
Kit DDLN-K-DD
Kit HHLN-K-HH
23
- hybrid modular display systems- light weight and small foot print
construction is designed tosupport up to 125 lbs
- available in fabric or graphic(shown with optional feet)
- hybrid modular display systems- each kit comes standard with a 2-section upright post, decorative cap,
LCD mounting bracket, PC shelf, & all neccessary mounting hardware
LIN
EAR | M
ODULAR COUNTERS
LINEAR MONITOR KIOSK KITS
LINEAR COUNTERS
Kit 1LN-MK-1
BeanLN-BN-CNTR
Kit 2LN-MK-2
OvalLN-OV-CNTR
Kit 3LN-MK-3
RacetrackLN-RT-CNTR
Kit 4LN-MK-4
Bean with HeaderLN-BN-CNTR-WHDR
Kit 5LN-MK-5
Racetrack with HeaderLN-RT-CNTR-WHDR
Oval with HeaderLN-OV-CNTR-WHDR
Silver Black NaturalMahogany
tops are available inyour choice of finishes
headers available inyour choice of shapes
(includes mounting hardware)
Linear accessories such as literature racks andmonitor mounts are also available on page 24
all counter models arebuilt with an internalshelf and access throughthe back of the unit
(shown with optional feet)
all counter models arebuilt with an internalshelf and access throughthe back of the unit
all counter models areall counter models are
oval
rectangle
24
LIN
EAR | 10
x 10
Kit ALN-K-10X10-A
Kit FLN-K-10X10-F
Kit BLN-K-10X10-B
Kit GLN-K-10X10-G
Kit CLN-K-10X10-C
Kit HLN-K-10X10-H
Kit DLN-K-10X10-D
Kit ILN-K-10X10-I
Kit ELN-K-10X10-E
Kit JLN-K-10X10-J
oval LN-OH-BWH
linear accent finialLN-ACNT-FIN
rectangleLN-TBL-OP-RCT
triangleLN-TBL-OP-TRI
standardLN-TBL-OP-STD
rectangle LN-RH-BWH
Silver Black NaturalMahogany
in your choice of finishes
start with a frame
LN112
Opti-mount 115 -30 LCDmax weight=30 lbsLN-LCD1-S
Opti-mount 214 -40 LCDmax weight=40 lbsLN-LCD2-S
LN-FK-10X10
BUILD YOUR OWN LINEAR with personalized options from start to finish
OR CHOOSE A KIT an off-the-shelf solution for your Linear display
add center graphicpanels (x2)
add up to 4 wings add a header(includes mounting hardware)
add a lit pocket(side or front mount)
add up to 3 tables(choose your shape & size)
add lights (your choice)
add accents(sold as a set)
taperupper
LN-TWU-BWH
rectangle
LN-RW-BWH
taperlower
LN-TWL-BWH
rectangle
LN-RW-BWH
Lumina 1 Lumina 6 Lumina 11 Lumina 12Lumina 3 Lumina 8 Lumina 13Lumina 4 Lumina 9Lumina 5 Lumina 10
add a monitor mount
ovalLN-OV-ACNT
teardropLN-TD-ACNT
(must be overa table unit)
25
Kit KLN-K-10X20-K
Kit NLN-K-10X20-N
Kit RLN-K-10X20-R
Kit LLN-K-10X20-L
Kit OLN-K-10X20-O
Kit SLN-K-10X20-S
Kit MLN-K-10X20-M
Kit PLN-K-10X20-P
Kit QLN-K-10X20-Q
Kit TLN-K-10X20-T
oval LN-OH-BWH
linear accent finialLN-ACNT-FIN
rectangleLN-TBL-OP-RCT
triangleLN-TBL-OP-TRI
standardLN-TBL-OP-STD
rectangle LN-RH-BWH
Silver Black NaturalMahogany
in your choice of finishes
start with a frame
LN-FK-10X20
LN112
Opti-mount 115 -30 LCDmax weight=30 lbsLN-LCD1-S
Opti-mount 214 -40 LCDmax weight=40 lbsLN-LCD2-S
BUILD YOUR OWN LINEAR with personalized options from start to finish
OR CHOOSE A KIT an off-the-shelf solution for your Linear display
add centergraphic panels (x4)
add up to 4 wings add a header(includes mounting hardware)
add a lit pocket(side or front mount)
add up to 3 tables(choose your shape & size)
add lights (your choice)
add accents(sold as a set)
taperupper
LN-TWU-BWH
rectangle
LN-RW-BWH
taperlower
LN-TWL-BWH
rectangle
LN-RW-BWH
Lumina 1 Lumina 6 Lumina 11 Lumina 12Lumina 3 Lumina 8 Lumina 13Lumina 4 Lumina 9Lumina 5 Lumina 10
add a monitor mount
LIN
EAR | 10
x 20
ovalLN-OV-ACNT
teardropLN-TD-ACNT
(must be overa table unit)
26
SIRIUS
OR-K-SR1
SIRIUSSIRIUSSIRIUSSIRIUS
ORBIT
AL EXPRESS | 10
x 10
KIT
S
The Orbital Express Truss System requires NO TOOLSfor set up! Installation couldn t be easier, simply twist &lock.The specially designed connectors are simple to use,strong & secure. Our truss kits can be reconfigured in multiple ways using the same parts. Have a different exhibitfor each show! We offer more than 41 professionallydesigned off the shelf kits for a variety of booth sizesand configurations. Each kit comes complete with all the parts, fixtures and fittings you need to create a successful exhibit, including (depending on the kit) low voltagespotlights and adjustable tabletopsAll Orbital ExpressTruss kits are both an economical andeco-friendly exhibit choice. All kits include appropriateshipping cases
27
ARA
CARINA
VELA-2
CASTOR
LYRACETUS
OR-K-AA1
OR-K-CT1
OR-K-CR1
OR-K-VL1-2
OR-K-LY1corner kit
OR-K-CS1
ORBIT
AL EXPRESS | 10
x 10
KIT
S
28
CYGNUS
MARS
PLUTO
PAVO
LYNXMERCURY
OR-K-SYG1corner kit
OR-K-ME1
OR-K-MR1
OR-K-PL1
OR-K-LX1
OR-K-PA1
PLUTO
OR-K-PL1OR-K-SYG1corner kit
OR-K-PA1OR-K-MR1
OR-K-ME1 OR-K-LX1
ORBIT
AL EXPRESS | 10
x 10
KIT
S
29
ORBIT
AL EXPRESS | 10
x 20 KIT
SCEPHEUS-2
THETA
PICTOR
INDUS
OR-K-CE1-2
OR-K-TH1
OR-K-PC1
OR-K-IN1
30
ANTARES
SATURN
ELECTRA
PHOENIX
OR-K-AT1
OR-K-SA1
OR-K-EL1
OR-K-PX1
ORBIT
AL EXPRESS | 10
x 20 KIT
S
31
POLARIS
ANDROMEDA
ARCTURUS
OMICRON
OR-K-PR1
OR-K-AD1
OR-K-AR1
OR-K-OM1
ORBIT
AL EXPRESS | 10
x 20 KIT
S
32
VENUS
HYDRUS
LEO
MAGELLAN
OR-K-VE1
OR-K-HD1
OR-K-LE1
OR-K-MG1
ORBIT
AL EXPRESS | 10
x 20 KIT
S
33
ORBIT
AL EXPRESS | 20 x 20 KIT
SDORADO
OR-K-DO1
CORVUS
CENTAURUS
NEPTUNE
OR-K-CV1
OR-K-CN1
OR-K-NP1
34
TUCANA
OR-K-TU1
ORION
VEGA
ALTAIR
OR-K-OR1
OR-K-VG1
OR-K-AL1
ORBIT
AL EXPRESS | 20 x 20 KIT
S
35
OCF
CANIS
DRACO
JUPITER
OR-K-CA1
OR-K-DR1
OR-K-JP1
OCT
- large, round, general purposefreight case- designed to handle national &
international exhibit freightshipments
- offers maximumprotection for yourexhibit materials
- stackable and canbe moved using thebuilt-in castors orwith a forklift
- shipping size=50 w x43 h x 47 d
- offers the same features and benefits of the OCT in a rectangular shape
- shipping size=51 w x 22 h x 38 d
ORBIT
AL EXPRESS | 20 x 20 KIT
S
36
ORBIT
AL EXPRESS | ACCESSORIE
SFREESTANDING ORBITALTRUSS TABLES
LAMINATE TABLETOPS
LIT RACK OPTI MOUNT INTERNAL SHELVING
SILVERNATURAL MAHOGANY BLACK
90 curved truss tableOR-CT-3
rectangular:OR-CT-4
OR-TBL-SOR-TBL-WD OR-TBL-DWD
OR-LCD-1-S
OR-LCD-2-S
OR-LCD-3-S
OR-TBL-B
right facing: OR-TBL2-R-Sleft facing: OR-TBL2-L-S
right facing: OR-TBL2-R-WDleft facing: OR-TBL-L-WD
right facing: OR-TBL2-R-DWDleft facing: OR-TBL2-L-DWD
Opti-Mount 115 -30 LCDmax weight=30 lbs
Opti-Mount 214 -40 LCDmax weight=80 lbs
Opti-Mount 330 -50 LCDmax weight=130 lbs
right facing: OR-TBL2-R-Bleft facing: OR-TBL2-L-B
half yin/yang left facing:OR-CT-1half yin/yang right facing:OR-CT-6
full yin/yang:OR-CT-5
triangular:OR-CT-2
tables can be combinedto make an attractive
reception counter
-available in all 4 finishes (light wood, dark wood, silver & black)- 24 straight span, 36 straight span, and 46 straight span
shelves available- 45 curved and 90 curved shelves (shown above)
- 10 pocket clamp on literaturerack
- sleek design- note: rack may not fit into the
standard kit packaging solution/molded case
- adjustable angles up to 30OR-STG
37
TaBLE ACE - mini tabletop banner stands- sold in packs of 3- black onlyTB-ACE-3
12 w x 24 h
TB-ACE-26 w x 24 h
TB-ACE-16 w x 12 h
SIGNATURE - tabletop literature dispensers- sold in packs of 2
SIG-13 pockets8.5 x 11
SIG-23 pockets8.5 x 11
SIG-33 pockets
4.25 x 11
SIG-43 pockets
4.25 x 11
VORT-X MINI
- quick & simple to assemble- ideal for retail/POP use- sold in packs of 2
red: VTX-MCblue:VTX-MC-BLblack:VTX-MC-BK
BREEZE
- retractable tabletop stand- ideal for custom
calendars & otherpromotional banners
BREZ-1-S
TABLETOP PRODUCTS
Table Throw
- complete your presentation with a dye-subprinted table throw
- lends a polished appearance to any display- maximize your advertising with additional space to
display your message
shown with Horizon Standard tabletop foldingpanel display (see page 18)
8 foot full: TBL-T-8-F6 foot full: TBL-T-6-F8 foot economy: TBL-T-8-E6 foot economy: TBL-T-6-E
shown with Horizon Standard tabletop foldingpanel display (see page 18)
- sold in packs of 2
38
ZEDUP 1
- 6 pocket rack- collapses and packs away
hard case upgrade:black: ZD-1-HC-Bsilver: ZD-1-HC-S
black: ZD-1-Bsilver: ZD-1-S
LIT
ERATURE RACKS | COLLAPSIB
LE
ZEDUP LITE
- collapsible- lightweight version of the
ZedUp- constructed from aluminum
& plastic for reduced weight
silver: ZD-LITE
ZEDUP 2
- 6 pocket rack- collapses and packs away- double width- hard case included
black: ZD-2-Bsilver: ZD-2-S
ZEDUP LITEZEDUP LITEZEDUP LITE ILLUSION
- fast-folding cantileverrack
- 4 front facing pockets
Illusion 1 single width black: IL-1-B, silver: IL-1-SIllusion 2 double width black: IL-2-B, silver: IL-2-S
All our literature racks are a recyclable display choice.
39
black: JAZ-Bsilver: JAZ-S
black: VIC-Bsilver:VIC-S
CasCADE
- modern design- front facing collapsible rack- scratch resistant polycarbonate
literature pockets- can be stored or shipped
loaded with literature- quick and easy to set up
CAS-1black: TITN-B
TITAN
- modular design- heavy duty- 8 pocket- packs in 3 separate parts
for reduced shipping size
JAZZ
- 3 angled pockets allowfor landscape or portraitliterature
VICTORY
- slim, modular, snap-togetherdesign
black: SLP-Bsilver: SLP-S
SLOPE
- stylish & elegant- packs flat
black: INN-Bsilver: INN-S
INNOVATE
- modular design- 10 pockets- packs in 3 separate parts
for reduced shipping size
LIT
ERATURE RACKS | M
ODULAR
CasCADECasCADECasCADE
10UP-B
10 UP
- strong & stable- 10 pockets- packs flat
All our literature racks are a recyclable display choice.
40
WEDGE
- simple to use sign support- combine multiple units for longer and taller displays- graphic size is variable- available in black only- graphics not included
application shown uses multiple units
WED-B
SYNERGRYAPEX
OASIS Leader
TRAPPA POSTERFRAME
LUMINA SPTCASE
LUMINA FLDCASE
- double-sided aluminum a-frame- features easy snap edge
technology- silver anodized finish
- double-sided plastic a-frame- can be printed directly on the
plastic for a smooth look
- highly portable- three arm
collapsible bagdispenser
- shiny silver finish
- each barrier can be linked to the next for thepurpose of directing traffic flow
- maximum length of each red belt is 82- heavy steel base features a non-skid bottom- sold in a set of 2 units as shown
- silver anodized with precision mitered corners- snaps open for quick & easy graphic changes- features spring loaded aluminum extrusions
mounted to a high-impact polystyrene backer- available in a wide range of standard sizes & come
with a clear protective lens- padded EVA formed case- holds two lumina spotlights
(most models) & power supply
- EVA semi-rigid lighting case- foam-lined padded
compartments- stores & transports two lights- designed for use with Lumina
models 1-5
SYN-2-1
SPT-CASE FLD-CASE
APEX
OASIS LDR-R-1
DIS
PLAY ADDIT
IONS
application shown uses multiple units
- features easy snap edgetechnology
- silver anodized finish
- designed for use with Luminamodels 1-5
- each barrier can be linked to the next for thepurpose of directing traffic flow
- maximum length of each red belt is 82- heavy steel base features a non-skid bottom- sold in a set of 2 units as shown
4141414141
LUMINA FLDCASE
DIS
PLAY LIG
HTIN
G | LUM
INOSIT
Y
LUMINA 1
LUMINA 6
LUMINA 11
LUMINA 2
LUMINA 7
LUMINA 12
LUMINA 3
LUMINA 8
LUMINA 13
LUMINA 4
LUMINA 9
LUMINA
LUMINA 5
LUMINA 10
- low voltage 50 watt spot light- goose neck arm- mounts horzontally
- low voltage 35 wattslender spot light
- mounts to a vertical pole- brushed stainless steel
finish
- incandescent 110 voltfixture
- dovetail mount- 45 watt incandescent bulb
included- silk black only
- 12 volt spotlight withfocus angle arm &adjustable head and tail
- includes 110 volt ULapproved transformer,50 watt bulb & universalfittings kit
- 18.5 (470 mm) long fromend to end
-arm is painted silver finish, head is high shine chromefinish
- low voltage, 50 wattspotlight
- stylish curved twin arms- silk black only
- 12 volt spotlight withstraight arm & adjustablehead and tail
- includes 110 volt ULapproved transformer,50 watt bulb & universalfittings kit
- 19 (482.6 mm) long fromend to end
- painted silver finish
- low voltage 50 watt- spot light, chrome with a
black head- telescopic arm- extends from 7 -22 long
- 12 volt spotlight withstraight arm & adjustablehead
- includes 110 volt ULapproved transformer,50 watt bulb & universalfittings kit
- 17 (431.8 mm) long fromend to end
- 12 volt spotlight withstraight arm & adjustablehead and tail
- light includes 110 volt ULapproved transformer,50 watt bulb & universalfittings kit
- 20 (508 mm) long fromend to end
- painted silver finish
- low voltage 50 watt chrome spotlight- deluxe ringed head- telescopic arm- extends from 7 -22 long
- 12 volt spotlight- straight arm with adjustable
head & tail- includes 110 volt UL
approved transformer- 50 watt bulb- universal fittings kit- 19.5 (495.3 mm) long from
end to end- painted silver finish
- 110 volt ETL approved wallwasher floodlight with a straight arm & adjustablehead
- light includes 200 watthalogen bulb
- 19.5 (495.3 mm) long fromend to end
- silk black finish-Ask about our newLUMINA 200 LED!
LUMINA SPARE BULB KIT LUM-BULB- (2) 50 watt low voltage spare bulbs
in a padded, protective EVA formedcase
UNIVERSAL LIGHT CLAMP KIT UNI-LT-CLP- comes standard with the Lumina 1, 3, 4,
5, 6, 8, 9, 10, 11, 12, 13 and allows ourlights to fit a majority of banners, truss & panel kits
LED BULB OPTION MR11: LUM-LV-LED-BLB11 MR16: LUM-LV-LED-BLB16- a green solution for Lumina
1, 2, 3, 4, 5, 6, 8, 10, 11, 12,& 13
- 5 watt LED bulb
- low voltage 50 wattspotlight
- deluxe chrome head- telescopic arm- extends from 7 -22 long
- low voltage 50 wattspotlight
- deluxe chrome head- telescopic arm- 20 long
silk black: LUM-1-Bchrome: LUM-1-C
LUM-2
LUM-7
LUM-12 LUM-13LUM-11
LUM-6
LUM-3 LUM-4
LUM-9
LUM-200 ORL
(LUM-LED-ORL-B)
LUM-5
LUM-10silk black: LUM-8-Bpainted silver: LUM-8-C
200
LUMINA 4 LUMINA 5
LED BULB OPTION
- a green solution for Lumina
42
MAXIMUM IMPACT, MINIMUM INVESTMENT!
GRAPHIC SERVICES
The Exhibitors Handbook is your guide to the most comprehensive selection of tradeshow, display and presentation products and solutions.
1-9.......BANNER STANDS
10-13....DISPLAY PANELS
14-17....POPUPS
18-19....FABRIC STRUCTURES
20........COUNTERS
21-27...EXHIBIT TRUSS KITS, EXHIBIT FURNITURE, ACCESSORIES
30-32...LITERATURE RACKS
33........INFO CENTERS, LITERATURE POCKETS, TABLETOP BANNER STANDS, SIGN FRAMES
34........LIGHTING
35........LIGHTBOXES
36........SCROLLING BANNERS, MOLDED CASES
37.........MOLDED CASES
Todays technology puts high quality, large scale graphics within the reach of every exhibitors budget. A breathtaking graphic grabs attention and will stop traffic at your booth! We have a wealth of tradeshow experience and a complete range of graphic services to offer. Together with traditional large-format, high quality inkjet murals and banners, we also offer back-lit transparencies, CNC cut vinyl, raised lettering, silkscreen printing and most other forms of signage.
With so many choices to improve the appearance of your presentation, graphics should be viewed as essen-tial and not a luxury.
For more information about adding graphics to any of the products in this catalog, or if you already own a display and are simply looking for new or replacement graphics, call us today and our experienced graphics specialists can help you take your display to a new level!
CONTENTS
No matter how large or small the project, we understand your presentation needs.
Our commitment to you is to provide a wide spectrum of choices and options, reliable quality and fast, friendly and efficient service!
From small presentations to full blown tradeshow exhibits, you will find everything you need, right here at your fingertips. Our cost efficient, value for money pricing will allow you to