+ All Categories
Home > Documents > Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire...

Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire...

Date post: 28-Sep-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
52
Transcript
Page 1: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces
Page 2: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

Order.

$100.00

$$$$$$

CREATE A QUEUING AREA THAT LIFTS SALES

chaos.

$50.00

Page 3: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

3

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

BOPIS - Buy Online, Pick Up in Store“Buy Online, Pick Up in Store” (“BOPIS") is an essential strategy for brick-and-mortar retailers looking to provide the convenience of online shopping—but at a much lower cost. BOPIS cuts shipping prices for both the retailer and the customer, while at the same time luring shoppers back into physical store locations.

Madix offers an extensive list of cataloged products geared toward implementing and maintaining a successful BOPIS strategy. Please contact your Madix sales representative for help creating a custom solution.

Streamlined Queuing

Impulse Merchandise

Organization

Adaptable

Security

Scalability

Graphics

Scalability Examples

Light-duty, steel-storage shelving on an expansile track provides the mobility and flexibility to grow or shrink according to BOPIS demand.

Page 4: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

4 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Mobile Storage SystemMadix’s Mobile Storage Systems create high-density storage while maintaining easy access to inventory. Retailers can reduce operating costs and conserve valuable floor space to maximize their front-room display area without increasing their overall store size. Montel, a world leader in mobile storage solutions and Madix’s strategic partner, provides systems that range from the basic “SmartSpace” manual carriage to fully powered systems. Specially engineered systems are also available, so storage capacity is virtually unlimited. For ordering information, please contact your Madix sales consultant.

SmartSpace SolutionChoose from Madix’s complete line of storage products, including Steel Light-Duty Storage Shelving, Post and Rail Storage Shelving, Wide Span, or Pallet Rack (depending upon requirements).

SmartSpace Rails

Handle

Base

Light-Duty Storage Shelving

Optional Mechanical Assist for heavy-duty

applications.

Maximize Backroom Storage Capacity Without Increasing Your Footprint

Backroom Example:Top View

MobileStorageSystem

Standard Storage Shelving Run

Typical Equipment Anti-Tip Options

Rails Galvanized rails resist corrosion and feature easily cleaned profile – no grooves to collect debris. Alignment connectors provided at rail joints.

Features and specifications below are typical to SmartSpace manual carriage systems.

Overhead Mounted to shelving with tubular guide rod and wall supports.

Floor Mount Features carriage-mounted system and special floor-mounted rail.

BasePrecision engineered and dimensioned to fit Madix Storage Equipment. The 3"H (76mm) base features dual-flanged steel wheels with a spherical surface to match rails and permanently lubricated/shielded bearings. Standard load capacity is 2,000 lbs per bay; dimensionsto 24'L and 4'W.

Brakes Carriages include manual, anti-drift brake system with easy activation and de-activation.

Bumper Carriages include rubber stop bumpers.

Overhead

Floor

Page 5: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

5

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Shoe SolutionsAt Madix, we don’t believe in “one size fits all,” especially when it comes to shoe displays. For every sandal, sneaker, boot, and pump, we’re your “sole” provider of customizable shoe-display fixtures and accessories. Mix and match thousands of standard, cataloged products to create the perfect fit for your store!

Fitting Room“Fitting room,” “dressing room,” “changing room”… No matter what you call it, Madix has the perfect solution for that “place where customers can try on clothes.” Our fitting room systems are flexible enough to handle any size, any season, and any fashion trend. With modular design and quick assembly, you can easily create a changing area tailored to your specific store layout—big or small—and reconfigure it as necessary to meet demand. Plus, with multiple shelving and accessory options available, you can merchandise the outside walls to extend your sales-floor space!

Page 6: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

6 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 201611/13

View full catalog @ www.madixinc.com/display/maxigrid/

• The unique Grid Panels work as the support of the system• Maxi Grid offers numerous shelving accessories that hang within the Grid Panels• Simple and easy-to-install shelf applications include loose brackets that support melamine, laminate, or wire-grid shelf options• Maxi Grid backing has Slatwall and Grid Back options• Backs can be mounted at the rear or anywhere required

Maximize the display capabilities of your store! Maxi Grid allows retailers to routinely change shelving configurations without wasting time or valuable merchandising space. All partsand accessories are designed for easy installation, so you can create an all-new, custom look in a matter of minutes.

Page 7: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

7

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

• Grid Panels work as the support of the system• Maxi Grid offers numerous shelving accessories that hang within the Grid Panels• Simple and easy-to-install shelf applications include loose brackets that support melamine, laminate, or wire grid shelf options• Maxi Grid backing has Slatwall and Grid Back options• Backs can be mounted at the rear or anywhere required• Create a unique in-store experience with this versatile fixture that can be adapted to meet most merchandising needs

Example of Maxi Grid Parts List Part Number Part Description QuantityA GPWFP2462 Maxi Grid Fixture Panel 2B GPASTBA67 Maxi Grid Anti-Sway Braces 2C GPWS4824-M Maxi Grid Wood Shelf 2D GPGKB48 Maxi Grid Front Kickplate 1E GPSB24 Maxi Grid Side Kickplate 2F GPHDWTS482404 Maxi Grid Heavy-Duty Wire Top Shelf with Lip 2

A

B

C

DE

F

GPWFP

GPRB

All Maxi Grid sections need to have left-to-right support on the top and bottom of sections. This can be done using GPRB(NW) (as shown), using any other bar offered, or using wire-grid shelves.

Page 8: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

8 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016A Maxi Grid Fixture Panel

• Available with or without foot plate (seismic version also available if required)

• Wire Grid is 2" OC (51 mm), allowing placement of shelves 2" OC (51 mm)

front-to-back and up-and-down• Standard finishes: Snow White, Sahara, Black, and Dove Gray• Load capacity is 1000 lbs per section

GPWFP(ND)(NH)(OPT) GPWFP .... Maxi Grid Wire Fixture Panel ND .... Nominal Depth 12", 18", 24", 30", or 36" (305 mm, 457 mm, 610 mm, 762 mm, or 914 mm) NH .... Nominal Height 62", 76", 88", 100", 124", or 148" (1575 mm, 1930 mm, 2235 mm, 2540 mm, 3150 mm, or3759 mm) OPT .... Blank=Framed Panel FP=Foot Plate FPBR=Foot Plate with Bracing

Framed Panel Foot Plate Foot Plate with Bracing

B Maxi Grid Anti-Sway BracesRegular-Duty & Seismic• Sway Braces are made up of turnbuckle and a length of wire rod (to stabilize units)• Sway Braces are for use at the end of every

run and in every other section in between• Lengths of sway braces are available for use

in all Wire Fixture Panels height (as shown)• Part number listed is for two

Anti-Sway Braces• Load capacity is 1000 lbs per section

Maxi Grid Wire Fixture PanelPlastic Top or Bottom Cap• Caps can be used at top or bottom of Maxi

Grid wire-fixture panel without foot • Standard finishes: Clear• Available in a 10, 20, or 40 pack

GPASTBA(OPT)(NL) GPASTBA.. Maxi Grid Anti-Sway Turnbuckle Assembly Pair OPT .... Blank=Regular-Duty S=Seismic NL .... Nominal Length 67" or 104" (1702 mm or 2642 mm)

GPWFPTC-(OPT)-CL GPWF .... Maxi Grid Wire Fixture PTC .... Panel Plastic Top or Bottom Cap OPT .... 10, 20, or 40 CL .... Color=Clear

Fixture Height

Fixture Width36" 48"

50" 67 6762" 67 6776" 67 6788" 67 67

100" 67 104124" 104 104148" 104 104

Regular-Duty

NOTE!Foot Plate with Bracing is for seismic

application (local codes apply).

NOTE!Two Anti-Sway Braces

needed per unit.Anti-Sway Braces are needed

every other fixture when in a run(see chart).

Bottom Cap Top Cap

Maxi Grid Upright Bracket• Bracket to secure Wire Fixture Panels to wall• No attachment hardware included

GPUBO GPUBO .... Maxi Grid Upright Bracket

NOTE!Normal installation “B” on bottom

of Wire Fixture Panel.

When Foot Plate and Foot Plate with Bracing is installed, inverted “B” shows at top.

See Maxi Grid ASY for more information.

B

B B

Page 9: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

9

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Maxi Grid Wire Shelf• Grid is 2" x 2" (51 mm x 51 mm)• Regular-duty, flat, wire-grid shelf• Load capacity is 40 lbs• Load capacity is 115 lbs if one loose GPRB(NW) is added

GPWGS(NW)(ND) GPWGS .... Maxi Grid Wire Grid Shelf NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) ND .... Nominal Depth 12", 18", 22", 24", 30", or 36" (305 mm, 457 mm, 559 mm, 610 mm, 762 mm, 914 mm)

Maxi Grid Wire Basket Lip Shelf• Can be used as an up-tilt shelf• Grid is 2" x 2" (51 mm x 51 mm)• Can be attached in multiple positions• Load capacity is 40 lbs

F Maxi Grid Wire Top Shelf with Lip• Grid is 2" x 2" (51 mm x 51 mm)• Regular-duty with 4" unsupported lip• Load capacity is 40 lbs• Load capacity is 115 lbs if one loose GPRB(NW) is added

GPWTS(NW)(ND)(NH) GPWTS .... Maxi Grid Wire Top Shelf with Lip NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) ND .... Nominal Depth 12", 18", 22", 24", 30", or 36" (305 mm, 457 mm, 559 mm, 610 mm, 762 mm, 914 mm) NH .... Nominal Height 04" (102 mm)

GPWBLS(NW)(ND)(NH) GPWBLS ... Maxi Grid Wire Basket Lip Shelf NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) ND .... Nominal Depth 10" to 28" in 2" increments (254 mm to 711 mm in 51 mm increments) NH .... Nominal Height 04" or 08" (102 mm or 203 mm)

4" or 8"

10" to 28"

Maxi Grid Heavy-Duty Wire Grid Shelf• Grid is 2" x 2" (51 mm x 51 mm)• Heavy-duty, flat, wire-grid shelf• Extra rebar support welded to shelf• Load capacity is 200 lbs

GPHDWGS(NW)(ND) GPHD .... Maxi Grid Heavy-Duty WGS .... Wire Grid Shelf NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) ND .... Nominal Depth 12", 18", 24", 30", 36" (305 mm, 457 mm, 610 mm, 762 mm, 914 mm)

Maxi Grid Heavy-Duty Wire Top Shelf with Lip• Grid is 2" x 2" (51 mm x 51 mm)• Heavy-duty shelf with unsupported 4" (102 mm) lip• Extra rebar support welded to shelf• Load capacity is 200 lbs

GPHDWTS(NW)(ND)04 GPHD .... Maxi Grid Heavy-Duty WTS .... Wire Top Shelf with Lip NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) ND .... Nominal Depth 12", 18", 24", 30" (305 mm, 457 mm, 610 mm, 762 mm) 04 .... 4" (102 mm) lip

Extra rebar welded

Extra rebar welded

Page 10: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

10 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016C Maxi Grid Wood Shelf Board

• Shelves available in 5/8" (16 mm) or heavy-duty 3/4" (19 mm) board; finishes include melamine (economy), sealed, and laminate

• Use with Maxi Grid Reinforcement Bars (GPRBC, GPRBL, GPRBCK, and GPLBSS)

• Size: Nominal Width - 3/8" (19 mm) Nominal Depth + 5/8" (16 mm) Example: 24" - .375" = 23.625 (610 mm - 10 mm = 600 mm)• Standard finishes: Snow White, Sahara, Black, Dove Gray, and Mahogany

GPWSB(OPT1)(NW)(ND)-(OPT) GPWSB .... Maxi Grid Wood Shelf Board OPT1 .... Blank=5/8" (16 mm) board HD=3/4" (19 mm) board NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) ND .... Nominal Depth 12", 18", 22", 24", 30", or 36" (305 mm, 457 mm, 559 mm, 610 mm, 762 mm, 914 mm) OPT .... S=Sealed L=Laminated M=MelamineFinish Code FIN1 FIN1 .... Laminate, Melamine and Edge Finish (If finish is omitted part is sealed)

Maxi Grid Wire Front Lip• Attaches to side of fixture panels• Tab at base to fit between GPRB(NW) and wood shelf

Maxi Grid Tempered Glass Shelves• 1/4" thick Tempered Glass with pencil edge• Standard Maxi Grid Reinforcement Bars under each shelf to securely support each shelf• Glass shelves 18" deep and less use 2-GPRB 24" deep and over use 3-GPRB

GPWFL(NW)(NH) GPWFL .... Maxi Grid Wire Front Lip NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) NH .... Nominal Height 2" or 4" (51 mm or 102 mm)

GPTGSB(NW)(ND) GP .... Maxi Grid TGSB .... Tempered Glass Shelf Base NW .... Nominal Width 24" to 60" in 6" increments (610 mm to 1524 mm in 152mm increments) ND .... Nominal Depth 12" to 36" in 2" increments (305 mm to 914 mm in 51mm increments)

D Maxi Grid Front Kickplate• Creates a filler at base of fixture panel• Attaches to side of fixture panel• Use only with wood shelf GPWSB(OPT1)(NW)(ND)-(FIN1)• Use only with GPRB (wood shelf sits on top of this bar)• Used with Maxi Grid Wood Shelf Base and

GPRB(NW) at rear

GPGKB(NW) GPGKB .... Maxi Grid Front Kickplate NW .... Nominal Width 36" or 48" (914 mm or 1219 mm)

E Maxi Grid Side Kickplate• Closes off side of fixture panel

GPSB(NW) GPSB .... Maxi Grid Side Kickplate NW .... Nominal Width 12", 18", 24", 30", or 36" (305 mm, 457 mm, 610 mm, 762 mm, or 914 mm)

Maxi Grid Reinforcement Bar• Reinforcement Bar is installed under a wood shelf• May be used with GPWSB(OPT1)(NW) (ND)-(FIN1) wood shelf• Two Reinforcement Bars required; more can

be added can be added depending on load and depth of particle board shelf

• Load capacity is 200 lbs with two GPRB(NW)• Load capacity is 275 lbs with three GPRB(NW)

GPRB(NW) GPRB .... Maxi Grid Reinforcment Bar NW .... Nominal Width 24", 36", or 48" (610 mm, 914 mm, or 1219 mm)

NOTE!For depths less than or equal to 18", use two

bars; depths of 24" or more require three.

Must use two bumpers (BSOC50)per GPRB(NW).

NOTE!Use with GPRB as a kickplate

at the base if required.

Stick-on Clear Bumper• Use with Maxi Grid Tempered Glass Shelves

[GPTGSB(NW)(ND)] to keep in place• 50 pack• Glass shelves 18" deep and less use 8 per shelf, 24" deep and over use 12 per shelf

BSOC50 BSOC .... Clear Stick-On Bumper 50 .... 50 pack

Page 11: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

11

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

D Maxi Grid Back Slatwall• Slatwall Back maximum recommended height is 48" (1219 mm)• If 96"H (2438 mm) required, use two extra combo and side retainers (see

exploded drawing)

GPBSW(TYPE)(NW)(NH) GPBSW .... Maxi Grid Back Slatwall TYPE .... L=Laminate M=Melamine P=Painted NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) NH .... Nominal Height 24" or 48" (610 mm or 1219 mm)

B Maxi Grid Slatwall Combo Channel• Use as a bottom or splicer channel for slatwall section

GPSWCC(NW) GPSWCC ... Maxi Grid Slatwall Combo Channel NW .... Nominal Width 36" or 48" (914 mm or 1219 mm)

A

B

D

C Maxi Grid Slatwall Side Retainer• Used with Slatwall Insert Sections to retain

sides of slatwall in Maxi Grid section

GPSWSR(NH) GPSWSR ... Maxi Grid Slatwall Side Retainer NH .... Nominal Height 24", 36", and 48" (610 mm, 914 mm, and 1219 mm)

C

Maxi Grid Inset Slatwall Spacer• Use with Slatwall Back to hold reinforcement bar in place• Use two per GPSWTC• Use two per GPSWCC

GPISWSP GPISWSP .. Maxi Grid Inset Slatwall Spacer

B

A Maxi Grid Slatwall Top Channel

GPSWTC(NH) GPSWTC ... Maxi Grid Slatwall Top Channel NH .... Nominal Height 24", 36", or 48" (610 mm, 914 mm, and 1219 mm)

Page 12: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

12 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016

3' or 4' sections

Creates emphasis on special products and brands

Take advantage of the Vesta™ Base Drawer for backstock and supplies

Translucent backs and shelves allowfor maximum light to flow through thefixture and illuminate all products

Madix’s new Vesta™® fixture creates a high-end, custom appearance. Vesta™’s optionally equipped LEDge Lights and acrylic shelves draw attention to merchandise by allowing lighting to fully penetrate the fixture’s surfaces. When lit, it glows. Additional options include Base Drawers and Base Display Tables. It’s ideal for many market segments, especially health and beauty, home goods, kitchenware, and apparel.

Page 13: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

13

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

UFDPUSEFVesta™ FixtureDivider Panel UprightSlotted End Frame

UFGCVesta™ FixtureGondola Core UFDPUI

Vesta™ FixtureDivider PanelUpright Intermediate

UFDPUEVesta™ FixtureDivider Panel Upright End

UFDTVesta™ FixtureBase Display Table

UFBDVesta™ Base Drawer

Use this Nominal Width Divider Panel for:Desired Shelf Depth Wall Double Sided Gondola Slotted End Frame Useable Depth

UFUSA(OPT1)-(NW)(ND)(OPT1) UFWDPU(OPT1)(NW)(NH)(OPT2) UFDPU(OPT1)(NW)(NH)(OPT2) UFDPUSEF(NW)(NH)(OPT) ACTUAL UFBD(NW)(ND)(NH) UFDT(NW)(ND)(NH)(OPT1)(OPT2)

Nominal Shelf Depth Wall Divider Panel Gondola Divider Panel Gondola Divider Panel Available Depth Drawer (Flushed to Front) Base Table (Flushed to Front)10" 24" 11.5" N/A 11"12" 30" 14.5" 14" 14"14" 32" 15.5" 15" 15"14" 20" 16.5" 16" 16"16" 36" 17.5" 17" 17"16" 22" 18.5" 18" 18"18" 42" 20.5" 20" 20"20" 26" 22.5" 22" 22"

20" or 22" 23.5" 23" 23"22" 28" 2.5" 24" 24"24" 30" 26.5" 26" 26"

Page 14: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

14 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016UFGC(NW)(NH)(OPT1)(OPT2) UF .... Vesta™ Fixture GC .... Gondola Core NW .... Nominal Width 24", 30", 32", 36", 42", or 48" (610 mm, 762 mm, 813 mm, 914 mm, 1067 mm, or 1219 mm) NH .... Nominal Height 48", 54", 60", 66", 72", 84", or 90" (1219 mm, 1372 mm, 1524 mm, 1676 mm, 1829 mm, 2134 mm, or 2286 mm) OPT1 .... Back Panel One FA=Frosted Acrylic MP=Milk Plex HL=Hardboard OPT2 .... Back Panel Two FA=Frosted Acrylic MP=Milk Plex HL=Hardboard Z=No Back

Vesta™ Fixture Wall Divider Panel Upright End or Intermediate• Slim profile 1" x 1" (25 mm x 25 mm) tubing• Single-panel design• Easy installation• Not slotted for shelves

Vesta™ Fixture Gondola Core• Slim profile 1" x 2" (25 mm x 51 mm) tubing

upright• Only two-tab Madix shelving may be used• Easy installation

UFWDPU(OPT1)(NW)(NH)(OPT2) UF .... Vesta™ Fixture WDPU .... Wall Divider Panel Upright OPT1 .... I=Intermediate L=Left Hand R=Right Hand NW .... Nominal Width 18", 20", 22", 24", 26", or 30" (457 mm, 508 mm, 559 mm, 610 mm, 660 mm, or 762 mm) NH .... Nominal Height 48", 54", 60", 66", 72", 84", or 90" (1219 mm, 1372 mm, 1524 mm, 1676 mm, 1829 mm, 2134 mm, or 2286 mm) OPT2 .... Back Panel FA=Frosted Acrylic MP=Milk Plex HL=Hardboard

UFDPU(OPT1)(NW)(NH)(OPT2) UF .... Vesta™ Fixture DPU .... Divider Panel Upright OPT1 .... E=End I=Intermediate NW .... Nominal Width 18", 24", 30", 36", 42", or 48" (457 mm, 610 mm, 762 mm, 914 mm, 1067 mm, or 1219 mm) NH .... Nominal Height 48", 54", 60", 66", 72", 84", or 90" (1219 mm, 1372 mm, 1524 mm, 1676 mm, 1829 mm, 2134 mm, or 2286 mm) OPT2 .... Back Panel FA=Frosted Acrylic MP=Milk Plex HL=Hardboard

Vesta™ Fixture Upright Divider Panel, End and Intermediate• For use on a gondola when shelves are on both sides• Only two-tab Madix shelving may be used• Easy installation

K

Page 15: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

15

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Vesta™ Fixture Display Table• Can be installed in the run or used as an end-cap display• Optional lighting helps merchandise stand out• Standard panels: Milk Plex

UFDT(NW)(ND)(NH)(OPT1)(OPT2) UF .... Vesta™ Fixture DT .... Display Table NW .... Nominal Width 24", 30", 32", 36", 42", or 48" (610 mm, 762 mm, 813 mm, 914 mm, 1067 mm, or 1219 mm) ND .... Nominal Depth 12", 14", or 16" (305 mm, 356 mm, or 406 mm) NH .... Nominal Height 12" (305 mm) OPT1 .... Front Panel Option FA=Frosted Acrylic MP=Milk Plex HL=Hardboard Laminated Two Sides OPT2 .... Top Panel Option FA=Frosted Acrylic MP=Milk Plex HL=Hardboard

UFDPUSEF(NW)(NH)(OPT) UF .... Vesta™ Fixture DPU .... Divider Panel Upright SEF .... Slotted End Frame NW .... Nominal Width 18", 24", 30", 36", 42", or 48" (457 mm, 610 mm, 762 mm, 914 mm, 1067 mm, or 1219 mm) NH .... Nominal Height 48", 54", 60", 66", 72", 84", or 90" (1219 mm, 1372 mm, 1524 mm, 1676 mm, 1829 mm, 2134 mm, or 2286 mm) OPT .... Back Panel FA=Frosted Acrylic MP=Milk Plex HL=Hardboard

Vesta™ Fixture Divider Panel Upright Slotted End Frame• Slim profile 1" x 11/2" (25 mm x 38 mm) tubing• Only two-tab Madix shelving may be used• Easy installation

UFGCOS(NW)(NH)(OPT1)(OPT2) UF .... Vesta™ Fixture GCOS .... Gondola Core with Offset Slots NW .... Nominal Width 24", 30", 32", 36", 42", or 48" (610 mm, 762 mm, 813 mm, 914 mm, 1067 mm, or 1219 mm) NH .... Nominal Height 48", 54", 60", 66", 72", 84", or 90" (1219 mm, 1372 mm, 1524 mm, 1676 mm, 1829 mm, 2134 mm, or 2286 mm) OPT1 .... Back Panel 1 FA=Frosted Acrylic MP=Milk Plex HL=Hardboard OPT2 .... Back Panel 2 FA=Frosted Acrylic MP=Milk Plex HL=Hardboard Z=No Back

Vesta™ Fixture Gondola Corewith Offset Slots• Offset slotting is narrower and decreases the growth of the Vesta™ system by .375" (10 mm) per section• Appeareance is further improved by

reducing the gap between the divider panels and shelves, tables, and

base drawers• Easy installation

Standard Slotting.750" x .375"

1" OC

Offset Slotting.750" x .225"

1" OC

Page 16: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

16 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Vesta™ Fixture Shelf• Slim profile shelf maximizes merchandise space• Includes standard 11/4" (32 mm) tag molding• Standard Tops: Clear Acrylic, Frosted Acrylic, Milk Plex, Tempered Glass, and

Hardboard Laminated• Other tops available; please contact your sales representative for more options• Load capacity is 100 lbs

Lighted Upper Shelf Assembly• Shelf assembly includes Slimline Light

Fixture Kit (SLFK) affixed to standard brackets

• Several sizes, finishes, and top surfaces are available• Shelf lights ship installed to fixture• Order one Slimline Light Fixture Power Cord

(SLFPC) for each run and one Slimline Light Fixture Connector Cord (SLFCC) for each Lighted Upper Shelf added to a run

• Maximum of 36' (10,972 mm) daisy-chained to one another [nine 4' (1219 mm) fixtures]

• 20 amp circuit will handle up to twenty-seven 4' (1219 mm) fixtures with 28 watt T5 bulbs (maximum on 3 strings of 9 fixtures)

• Load capacity is 100 lbs

Top View

Bottom View

UFUSA(OPT1)-(NW)(ND)(OPT1) UF .... Vesta™ Fixture USA .... Upper Shelf Assembly OPT1 .... Light Option NL=No Light Blank=with Light NW .... Nominal Width 18", 24", 30", 36", 42", or 48" (457 mm, 610 mm, 762 mm, 914 mm, 1067 mm, or 1219 mm) ND .... Nominal Depth 8" to 24" in 2" increments (203 mm to 610 mm in 51 mm increments) OPT1 .... Top Option FA=Frosted Acrylic MP=Milk Plex HL=Hardboard Laminated 2 Sides TG=Tempered Glass CA=Clear Acrylic ND=None

Vesta™ Fixture Base Drawer• Optional base drawer with tag molding• Allows inventory storage on sales floor• Ball-bearing slides allow easy operation

UFBD(NW)(ND)(NH) UF .... Vesta™ Fixture BD .... Base Drawer NW .... Nominal Width 24", 36", 42", or 48" (610 mm, 914 mm, 1067 mm, or 1219 mm) ND .... Nominal Depth 14" to 26" (356 mm to 660 mm) NH .... Nominal Height 06" or 08" (152 mm or 203 mm)

LUSA(OPT1)-(NW)(ND)-(OPT2) LUSA .... Lighted Upper Shelf Assembly OPT1 .... Light Option NL=No Light Blank=Lighted NW .... Nominal Width 3' or 4' (914 mm or 1219 mm) ND .... Nominal Depth 12", 14", 16", 18", 20", 22", or 24" (305 mm, 356 mm, 406 mm, 457 mm, 508 mm, 559 mm, or 610 mm) OPT2 .... Top Option TG = Tempered Glass CA = Clear Acrylic FA = Frosted Acrylic ND = No Deck

NOTE!LEDge Light can be used in place of

Slimline Light Fixture Kit (SLFK-(NW) with the option of NL=No Light.

Order LEDge Light LLS(NL) separately.

Page 17: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

17

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Tube Line Metal Shelf• Flush-front shelf with diamond perforations

TLMS(OPT1)(NW)(ND) TLMS .... Tube Line Metal Shelf OPT1 .... D=Diamond Perferated NP=Non-Perferated NW .... Nominal Width 18", 24", 30", 36", 42", or 48" (457 mm, 610 mm, 762 mm, 914 mm, 1067 mm, or 1219 mm) ND .... Nominal Depth 08" to 24" in 2" increments (203 mm to 610 mm in 51 mm)

Tube Line Pull-Out Demo Display• Requires the use of Tube Line Metal Shelf at top and bottom of each display

TLUPODD(NW)1016(OPT) TL .... Tube Line UPODD .... Universal Pull-Out Demo Display NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) 1016 .... Nominal Depth 10" to 16" range pull-out (254 mm to 406 mm range pull-out) OPT .... KL=Kenstan Lock Blank=Standard Lock

Tube Line Universal Pull-Out Demo Display End Panel• Nominal height must be in 10" increments w20" covers two pull-outs w40" covers four pull-outs

TLUPODDEP(NH)1016(OPT) TL .... Tube Line UPODD .... Universal Pull-Out Demo Display EP .... End Panel NH .... Nominal Width 20" or 40" (508 mm or 1016 mm) 1016 .... Nominal Depth 10" to 16" range pull-out (254 mm to 406 mm range pull-out) OPT .... LH=Left Hand RH=Right Hand

Page 18: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

18 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Luxe is the softer approach to metal fixtures, allowing retailers to create fashionable, multifunctional displays without hassle or added expense. Clean lines and rounded edges give Luxe the upscale appearance of a custom look, while the use of Maxi Line and TubeLine accessories maintain the efficiency and affordability of standard cataloged products. (Patent pending.)

• Luxe features a unique, patent-pending slotting system that is compatible with standard Maxi Line and Tube Line shelving, accessories, and other merchandising pieces• Integrative back panel systems that are made of wire and perforated metal• Slotted posts give retailers the capability to extend the fixture in four directions• Versatile options ranging from tables to freestanding units• Unique post system can also be attached to walls• Upgrades and re-configurations are simple and efficient

View full catalog @ www.madixinc.com/display/luxe

Page 19: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

19

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Luxe T-Uprights withLeg on Both Sides• T-Upright with center-slotted upright and two legs; used for two-sided

merchandising applications or where stability is required

• Slotted 1" (25 mm) OC on four sides to produce a wide array of fixture

configurations• All standard Maxi Line and Tube Line accessories work with Luxe Merchandising

System• Optional Caster can be used on T-Uprights

Wall Outriggers Upright only when used as a table or other stable configuration

LUXT-(NH)(NDL)(NDR)(OPT) LUXT .... Luxe T-Upright NH .... Nominal Height 36" to 96" in 6" increments (914 mm to 2438 mm in 152 mm increments) NDL .... Nominal Depth Left 12" to 24" in 2" increments (305 mm to 610 mm 51mm increments) NDR .... Nominal Depth Right 12" to 24" in 2" increments (305 mm to 610 mm 51 mm increments) OPT .... Blank= Leveler C= Casters

Optional caster

NOTE!DO NOT use casters on L- Uprights

unless supported on rear by anotherLuxe fixture. Contact your sales

consultant regarding application.

Luxe Back Panels LUXB(TYPE)(NH)(NW) LUXB .... Luxe Back Panels TYPE .... HG=Harmonic Grid MSP=Metal Square Perforated WG=3"x3" Wire Grid (76 mm x 76 mm) MPG=Multi-Grid NH .... Nominal Height 24", 30", 36", 42", 48" (610 mm, 762 mm, 914 mm, 1067 mm, 1219 mm) NW .... Nominal Width 18" to 48" in 6" increments (457 mm to 1219 mm in 152 increments)

Harmonic Grid

Shown with 3"x3" Wire GridShown with Harmonic Grid Shown with Metal Square Perforated

Luxe Tie Bar• Use Tie Bar when no backs are being used to stabilize aisles and walls• Minimum of two required per section

LUXTB-(NW) LUXTB .... Luxe Tie Bar NW .... Nominal Width 18" to 48" in 6" increments (457 mm to 1219 mm in 152 mm increments)

Page 20: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

20 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016

Luxe Queuing SolutionPut method back into the madness of checkout lines! Madix’s Luxe Queuing Solution helps retailers boost sales by reducing wait time in the checkout area, improving customer satisfaction and strengthening brand loyalty.

Our Luxe Queuing Solution feeds one line of customers to multiple registers in an orderly and efficient manner, minimizing customer frustration. And with the variety of configurations available, retailers have the flexibility to promote more impulse merchandise and services at a consistent exposure level. Our Luxe Queuing Solution offers almost all standard Madix shelves and accessories.

Build Your OwnOnce you’ve determined your queuing layout, our three-step design process can help you create the perfect solution for your store’s needs. It’s just 1, 2, 3… and you’re done!

1Pick Your Post 2Pick Your Back 3Pick Your Accessories

Choose your height and type of Luxe Queuing Post40", 48", 66", or 72" high (1016 mm, 1219 mm, 1676 mm, or 1829mm)

Select the height, material, and type of your backing component

Mix and match accessories from our other product lines

Page 21: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

21

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Pick Your Accessories

Luxe Queuing Post Slotted on Two (2) Sides• The section’s back material (Pegboard, Grid,

Slatwall, or Megawall) is used to support the shelves and accessories, not the posts’ slots

• Creates a clean look (no front-facing visible slots)• Base diameter of 13" (330 mm)

Luxe Queuing Post Slotted on Four (4) Sides• Especially designed for Maxi Shelves and

Accessories (with brackets)• Provides the most flexibility for

configurations—four slots allow for 90° turns in four different directions

• Creates sharp, neat corners without need for filler panels

• Base diameter of 13" (330 mm)

Pick your height and type of Luxe Queuing Post:40", 48", 66", or 72" high (1016 mm, 1219 mm, 1676 mm, or 1829mm)

LUQP(NH)S2 LUQP .... Luxe Queuing System Post NH .... Nominal Height 40", 48", 66", or 72" (1016 mm, 1219 mm, 1676 mm, or 1829 mm) S2 .... Slotted 2-Sided

LUQP(NH)S4 LUQP .... Luxe Queuing System Post NH .... Nominal Height 40", 48", 66", or 72" (1016 mm, 1219 mm, 1676 mm, or 1829 mm) S4 .... S4=Slotted 4-Sided

90° corner shown with LUQP(NH)S4

Multi Purpose Grid

Slatwall

Queuing Post Detail

Queuing Post Detail Base Diameter13"

Base Diameter13"

1Pick Your Post

Page 22: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

22 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016

Heights• Nominal 40" high sections can be used in all post heights of 40", 48", 66", or 72" (1016 mm, 1219 mm, 1676 mm, or 1829mm)• Nominal 48" high sections are used in 48", 66", or 72" (1219 mm, 1676 mm, or 1829mm) posts

Back Options• 1" x 1" (25 mm x 25 mm) Crossbars two (2) required per section• Hardboard Two (2) sides• Pegboard Two (2) sides• Slatwall Two (2) sides• Slatwall One (1) side• MegaWall™ Two (2) sides• Grid Backs One (1) side• Grid Backs Two (2) side

Luxe Queuing Hardboard Backs on Two (2) Sides• Nominal widths are 24", 36", or 48" (610 mm, 914 mm, and 1219 mm) • Nominal heights are 40" or 48" (1016 mm or 1219 mm) • Available with hardboard backs on both

sides; back is a one-piece unit and easily installs into side slots of the Luxe

Queuing Post• Also available with pegboard on one side

and hardboard on the other

LUQB(OPT)DP(NW)(NH) LUQB .... Luxe Queuing System Back OPT .... HH=Hardboard Two Sides HP=Hardboard Back & Pegboard DP .... Double Panel NW .... Nominal Width 24", 36", or 48" (640 mm, 914 mm, or 1219 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm)

Finish Code FIN1 .... Metal FIN2 .... Back One FIN3 .... Back Two

Luxe Queuing Pegboard Backson Two (2) Sides• Nominal widths are 24", 36", or 48" (610 mm, 914 mm, and 1219 mm) • Nominal heights are 40" or 48" (1016 mm or 1219 mm) • Pegboard backs on both sides; back is a one-piece unit and easily installs into side slots of the Luxe Queuing Post• Also available with pegboard on one side and hardboard on the other

LUQB(OPT)DP(NW)(NH) LUQB .... Luxe Queuing System Back OPT .... PP=Pegboard Two Sides HP=Hardboard Back & Pegboard DP .... Double Panel NW .... Nominal Width 24", 36", or 48" (640 mm, 914 mm, or 1219 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm)

Finish Code FIN1 .... Metal FIN2 .... Back One FIN3 .... Back Two

Usable space on all wire panels

SizeNominal Width x Nominal Height

Usable SpaceActual Width x Actual Height

24" x 40" 17.5" x 33"24" x 48" 17.5" x 41"36" x 40" 29.5" x 33"36" x 48" 29.5" x 41"48" x 40" 41.5" x 33"48" x 48" 41.5" x 41"

Usable space on pegboard and slatwall

SizeNominal Width x Nominal Height

Usable SpaceActual Width x Actual Height

24" x 40" 16.438" x 31.125"24" x 48" 16.438" x 39.125"36" x 40" 28.438" x 31.125"36" x 48" 28.438" x 39.125"48" x 40" 40.438" x 31.125"48" x 48" 40.438" x 39.125"

2Pick Your Back Pick your height, type, and material of back

Page 23: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

23

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

LUQB(TYPE)SP(NW)(NH) LUQB .... Luxe Queuing System Wire Back TYPE .... Grid Type SG=Slatgrid MG=Mini Grid MPG=Multi-Purpose Grid 2X2=2x2 Grid 3X3= 3x3 Grid MSG=Modified Slatgrid MHG=Modified Harmonic Grid SP .... Single Panel NW .... Nominal Width 24", 36", or 48" (640 mm, 914 mm, or 1219 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm)

Luxe Queuing Wire Grid Backs with One (1) Panel Per Section• Nominal widths are 24", 36", or 48" (610 mm, 914 mm, and 1219 mm) • Nominal heights are 40" or 48" (1016 mm or 1219 mm) • Wire Grid back is center mounted in each section• Back is a one-piece unit and easily installs into

side slots of the Luxe Queuing PostSlatgrid

Luxe Queuing Slatwall Backs on One (1) Side• Nominal widths are 24", 36", or 48" (610 mm, 914 mm, and 1219 mm) • Nominal heights are 40" or 48" (1016 mm or 1219 mm) • Slatwall back on one side, flat on rear• Back is a one-piece unit and easily installs into side slots of the Luxe Queuing Post• If the slatwall back is painted, the slatwall front and flat interior will be painted the same color• The flat interior side can be laminated, if the reverse slatwall side is painted or laminated

LUQB(B1)SP(NW)(NH) LUQB .... Luxe Queuing System Back B1 .... Back Option SWL=Slatwall Laminated SWP=Slatwall Painted SP .... Single Panel NW .... Nominal Width 24", 36", or 48" (640 mm, 914 mm, or 1219 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm)

Finish Code FIN1 .... Metal FIN2 .... Back One (front & back same color only) FIN3 .... Inserts One FIN4 .... Interior Back (laminate option only)

Luxe Queuing Slatwall Backs on Two (2) Sides• Nominal widths are 24", 36", or 48" (610 mm, 914 mm, and 1219 mm) • Nominal heights are 40" or 48" (1016 mm or 1219 mm) • Slatwall backs on two sides• Back is a one-piece unit and easily installs into

side slots of the Luxe Queuing Post

LUQB(B1)(B2)DP(NW)(NH) LUQB .... Luxe Queuing System Back B1 .... Back Option One SWL=Slatwall Laminated SWP=Slatwall Painted B2 .... Back Option Two SWL=Slatwall Laminated SWP=Slatwall Painted DP .... Double Panel NW .... Nominal Width 24", 36", or 48" (640 mm, 914 mm, or 1219 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm)

Finish Code FIN1 .... Metal FIN2 .... Back One FIN3 .... Inserts One FIN4 .... Back Two FIN5 .... Inserts Two

Luxe Queuing MegaWall™ Backs on Two (2) Sides• Nominal widths are 24", 36", and 48" (610 mm, 914 mm, and 1219 mm)• Nominal heights are 40" or 48" (1016 mm or 1219 mm) • MegaWall™ Back Panel Insert is slotted on two sides ONLY• MegaWall™ Backs are 2" OC slotting• Back is a one-piece unit and easily installs into

side slots of the Luxe Queuing Post

LUQBMW(NW)(NH)(OPT1) LUQB .... Luxe Queuing System Back MW .... MegaWall™ NW .... Nominal Width 24", 36", or 48" (640 mm, 914 mm, or 1219 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm) OPT1 .... U=Unpainted (raw aluminium)

Finish Code FIN1 .... Frame FIN2 .... MegaWall™

2" OC

Page 24: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

24 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016LUQB(TYPE)DP(NW)(NH) LUQB .... Luxe Queuing System Wire Back TYPE .... Grid Type SG=Slatgrid MG=Mini Grid MPG=Multi-Purpose Grid 2X2=2x2 Grid 3X3= 3x3 Grid MSG=Modified Slatgrid MHG=Modified Harmonic Grid DP .... Double Panel NW .... Nominal Width 24", 36", or 48" (640 mm, 914 mm, or 1219 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm)

Luxe Queuing Wire Grid Backs with Two (2) Panels Per Section• Nominal widths are 24", 36", or 48" (610 mm, 914 mm, and 1219 mm) • Nominal heights are 40" or 48" (1016 mm or 1219 mm) • Two wire grid backs are mounted in each section, allowing independent

merchandising• Back is a one-piece unit and easily installs

into side slots of the Luxe Queuing Post

Slatgrid & Harmonic Grid Mulit-Purpose Grid 2" x 2" or 3" x 3"Mesh Grid

Mini Grid Modified Slatgrid

Optional Grid Backs

Slatgrid

LUQFPCR(NW)(OPT) LUQF .... Luxe Queuing Fixture PCR .... Post Connector Rail NW .... Nominal Width 24", 36", or 48" (640 mm, 914 mm, or 1219 mm) OPT .... Blank=Locking NL=Non-Locking

Luxe Queuing Fixture Post Connector Rail• Nominal widths are 24", 36", or 48" (610 mm, 914 mm, and 1219 mm) • Rails are installed across post where shelving

and accessories are not needed• Produces an open look with greater

merchandise visibility in the queuing area• Minimum of two (2) required per section (more can be added if required)

LUXBLI-BLK LUXBLI .... Luxe Back Locking Insert BLK .... Black

Luxe Backing Locking Insert• All backs [except LUQFPC(NW)] include four (4) locking inserts• Pack of 8 inserts

Luxe Queuing Retractable Retainer• Retractable belt fits into the face of the post/stanchion• Housing and receiving clip easily hangs and is secured to the slots in the Luxe

Queuing Post• Can be moved where needed• 51/2"H x 3"W x 3"D, retainer extends 71/2"

LUQRR LUQRR .... Luxe Queuing Retractable Retainer

Page 25: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

25

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

1 2 3 4

MERCHANDISING RESTRICTIONS

1. IF A SECTION HAS 4 SIDED POST AND ONLY RAILS, ITS CAN ONLY HAVESHELF MERCHANDISING

2. IF A SECTION HAS 4 SIDED POST AND A PANEL THAT CAN BE MERCHANDISED, IT CAN HAVE SHELF AND PANEL MERCHANDISING.

3. IF A SECTION HAS 2 SIDED POST AND A PANEL THAT CAN BE MERCHANDISED, IT CAN ONLY BE PANEL MERCHANDISED.

4. IF A SECTION HAS 2 SIDED POST AND ONLY RAILS, IT CAN NOT BE MERCHANDISED.

ASY FOR LUXE QUEUING SYSTEM

D

C

B

A

4 3 2 1

4 3 2

D

C

B

A

PO BOX 729 TERRELL, TX 75160

ASY-80038993SHEET 3 OF 4

ECM # 500000015293REV. 00

1

256-839-6354 / 214-515-5400 / 800-776-2349

20984 AL HWY 9 GOODWATER, AL 35072© 2014 Madix Inc., All rights reserved

Merchandising the Luxe Queuing System 1. If a section has a four-sided post and only rails, it can only have shelf merchandising.2. If a section has a four-sided post and a panel that can be merchandised,

it can have a shelf and panel merchandising.3. If a section has a two-sided post and a panel that can be merchandised,

it can only be panel merchandised.4. If a section has a two-sided post and only rails, it cannot be merchandised.

Certain panel placement can restrict merchandising capabilities1. The plan below uses all posts with slots on four sides.2. If a panel blocks the slots on a post, shelf merchandising is not possible.3. Exception: If connection rails are used (see number four above), shelf merchandising is possible between the connector rails where the slots are not used.

A Shelf or panel merchandisingB Panel merchandising only

A A A

A B B

A

1 2

Panel Rail

B B B

Page 26: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

26 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Luxe Queuing: 45-Degree Inside Corner Panel and ShelfA new angle for impulse merchandising! Madix’s most flexible queuing solution, Luxe Queuing, now comes with accessories specifically designed to cut corners and extend merchandising space. The Inside Corner Panel connects two perpendicular side panels to create a 45-degree “bend,” creating a softer, more aesthetic appearance. Plus, using the corresponding Inside Corner Shelf, retailers can build seamless shelving runs that not only look great, but perform even better!

Outside of 45° Inside Corner Shelf

45° Inside Corner Shelf

A Shelf or panel merchandisingB 45° Inside Corner Shelf, 24"

A

A

B

Page 27: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

27

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Luxe 45° Corner Shelf• Maximum shelf depth is 10" (254 mm) only• Corner shelf bolts into adjacent shelves at the same level

LUQSUS45-10 LUQ .... Luxe Queuing SUS .... Standard Upper Shelf 45 .... 45° 10 .... Nominal Depth 10" (254 mm)

Standard Upper Shelf• Maximum shelf depth is 10" (254 mm) only

SUS-(NW)10 SUS .... Standard Upper Shelf NW .... Nominal Width 2' to 4' in 6" increments (610 mm to 1219 mm in 152 mm increments) 10 .... Nominal Depth 10" (254 mm)

Luxe Queuing Post Slotted on Four (4) Sides• Especially designed for Maxi Shelves and

Accessories (with brackets)• Provides the most flexibility for

configurations—four slots allow for 90° turns in four different directions

• Creates sharp, neat corners without need for filler panels

• Base diameter of 13" or 24" (330 mm)

LUQP(NH)S4 LUQP .... Luxe Queuing System Post NH .... Nominal Height 40", 48", 66", or 72" (1016 mm, 1219 mm, 1676 mm, or 1829 mm) S4 .... S4=Slotted 4-Sided

Queuing Post Detail

Base Diameter13"

NOTE!Must use Slotted on Four Sides

Queuing System Post.

Page 28: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

28 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Luxe Queuing Slatwall Back 45°• Nominal width is 24" (610 mm) • Nominal heights are 40" or 48" (1016 mm or 1219 mm)

LUQB45(BACK1)(BACK2)(OPT)(NW)(NH) LUQB .... Luxe Queuing System Back 45 .... 45° BACK1 .... Interior Back SWL=Slatwall Laminated SWP=Slatwall Painted SWM=Slatwall Melamine BACK2 .... Exterior Back SWL=Slatwall Laminated SWP=Slatwall Painted SWM=Slatwall Melamine Blank=Single-Sided OPT .... SP=Single Panel DP=Double Panel NW .... Nominal Width 24" (640 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm)

Luxe Queuing MegaWall™ Back 45°• Nominal width is 24" (610 mm) • Nominal heights are 40", 48", 54", or 60" (1016

mm, 1219 mm, 1372 mm, or 1524 mm) • Single-sided MegaWall™ back that is 2" OC and slotted on two sides

LUQB45MW(NW)(NH) LUQB .... Luxe Queuing System Back 45 .... 45° MW .... MegaWall™ NW .... Nominal Width 24" (640 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm)

Finish Code FIN1 .... Frame FIN2 .... MegaWall™

Page 29: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

29

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

3Pick Your Accessories See the Luxe catalog to mix and match accessories

Luxe Queuing Hardboard Back 45°• Nominal width is 24" (610 mm) • Nominal heights are 40", 48", 54", or 60" (1016

mm, 1219 mm, 1372 mm, or 1524 mm)

LUQB45(BACK1)(BACK2)DP(NW)(NH) LUQB .... Luxe Queuing System Back 45 .... 45° BACK1 .... Interior Back H=Hardboard HL=Hardboard Laminated P=Pegboard PL=Pegboard Laminated BACK2 .... Exterior Back H=Hardboard HL=Hardboard Laminated P=Pegboard PL=Pegboard Laminated DP .... Double Panel NW .... Nominal Width 24" (640 mm) NH .... Nominal Height 40", 48", 54", or 60" (1016 mm, 1219 mm, 1372 mm, or 1524 mm)

Finish Code FIN1 .... Metal FIN2 .... Interior Back FIN3 .... Exterior Back

Luxe Queuing Wire Grid Back 45°• Nominal width is 24" (610 mm) • Nominal heights are 40", 48", 54", or 60" (1016

mm, 1219 mm, 1372 mm, or 1524 mm) • Double-sided back will have the same wire grid

LUQB45(TYPE)(OPT)(NW)(NH) LUQB .... Luxe Queuing System Back 45 .... 45° TYPE .... Wire Grid Type SG=Slat Grid MG=Mini Grid MPG=Multi Purpose Grid 2X2=2" x 2" Grid 3X3=3" x 3" Grid MSG=Modified Slat Grid MHG=Modified Harmonic Grid OPT .... SP=Single Sided DP=Double Sided NW .... Nominal Width 24" (640 mm) NH .... Nominal Height 40" or 48" (1016 mm or 1219 mm)

Page 30: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

30 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016LEDge Light Gen3As the industry’s leading provider of LED shelf lighting, Madix is proud to offer a variety of options for creating illuminated displays. Our patent-pending LEDge Light is the first LED-lighting product created specifically for retail shelves. These environmentally friendly LEDs produce light intensity comparable to that of T5 fluorescent bulbs—but with half the energy consumption and nearly three times the lifespan. The latest generation is our most efficient version yet, reducing energy consumption by an additional 25% (see specifications below).

ShelfWidth

PartNumber

ActualLength DC Watts Max # Lights per

Power Supply

24" LLS24 22½" 3.6W 2736" LLS36 34½" 5.4W 1848" LLS48 46½" 7.2W 13

46½" (1181 mm)

1.88" (48 mm)Top View

Bottom View

LLS(NL) LLS .....LEDge Light NL .....Nominal Length 24", 36", or 48" (610 mm, 914 mm, or 1219 mm)

• 2', 3', or 4' lengths (610 mm, 914 mm, or 1219 mm)• Maintenance-free life in excess of 50,000 hours (11 years at 12 hours/day)• Compact, 1.18" x .88" (30 mm x 22 mm) profile• Durable aluminum extrusion• Integrated magnets make installation on metal shelves or other surfaces easy

and allow fast changes• End tabs with holes for fastening to wood shelves, counters, or other surfaces• Certified by the DesignLights™ Consortium (DLC) and Underwriters

Laboratories, Inc. (UL) • DLC certification provides potential utility rebates• All plug ’n’ play connections– no electrician required (class 2 system)• Multiple units connected using Jumper Cables or Harness Assembly• May be daisy-chained to single power supply for “single row” applications• Power up to thirteen 48" LEDge Lights with one power supply (see chart)• Color temperature: 4200K• Color Rendering Index (CRI) of 85• Contains no heavy metals• Low power consumption helps meet California Title 24 lighting regulations• Safe 24 volt DC system • 3-year warranty• Not compatible with Lumiback or Lumishelf™ accessories LLS(NL)

Page 31: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

31

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

One (1) Beginning Module Four (4) Center Modules One (1) End Module

Typical Module Spacing

121/4" (311)

Four (4) ConductorWhite Jacketed Cable

Two (2) Right Angle Barrel Connectorwith 72" (1829 mm) Leads

(not shown to scale)

10/13

LEDge Light Cable Clamp• Use to cleanly route cables• Clear nylon with adhesive back• 3/8" (10 mm) capacity• 25 pieces per pack

LLCC38-25 LLCC .... LEDge Light Cable Clamp 38 .... 3/8" (10 mm) capacity 25 .... 25 pieces

LEDge Light Harness Assembly• Harness Assembly is used to connect up to 6

LEDge Lights to a single 100W power supply• Up to 12 lights may be connected to a single

Harness Assembly by using 2 power supplies• Harness plugs directly into power supply• Jumper Cables required to connect LEDge Lights to Harness Assembly• 6 modules, 12.25" (311 mm) OC with 72" (1829 mm) leads for each power supply

connection• Screw tab on each connecting module allows

fastening to perfed back panel via push rivets or to other surfaces with screws

(not included)• White color

LLHA LLHA .... LEDge Light Harness Assembly

LEDge Light Jumper Cable• Required to connect LEDge Lights to Harness Assembly and adjacent lights in daisy-chain

applications• White color

LEDge Light Power Supply• UL-listed 100W power supply features nearly 90% efficiency through use of latest circuitry design • 120V standard plug– no electrician required• Maximum of 16 power supplies per 20 amp circuit• Not compatible with Lumiback or Lumishelf™

LEDge Light Deck Support Mounting Clip• Hardware pack Included

LLJ(NL) LLJ .... LEDge Light Jumper Cable NL .... Nominal Length 6", 18", 30", 72", 144" (152 mm, 457 mm, 762 mm, 1829 mm 3658 mm)

LLPS LLPS .... LEDge Light Power Supply

LLDSMC LLDS .... LEDge Light Deck Support MC .... Mounting Clip

LEDge Light Cable Clamp Magnetic• Use to cleanly route cables• Easy fast installation, durable, and reusable• Mounts rotate 360º• 1/2" (13 mm) capacity• Available in black or white

LLCCCM-(OPT) LLCCCM .... LEDge Light Cable Clamp Magnetic OPT .... Color B=Black W=White

Page 32: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

32 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016

LEDge Light Versa is Madix’s most versatile lighting solution for retail shelves, featuring LED lights that draw attention to your merchandise, thereby increasing sales. Most lighting systems require you to completely unplug and reconnect the lights’ wires when reconfiguring your shelving arrangement, but LEDge Light Versa’s spring-loaded connectors allow for quick and easy adjustments. No more rewiring power cables or repositioning electrical connections!

• Quickly reset plan-o-grams without moving wires

• Cut the expense of hiring electricians

• Reduce the cost of store associates’ labor

How Versa Works

Simply unhook and reattach the shelves to the uprights—aligning the connectors with the corresponding bus bars—and the lights automatically turn on.

LEDge Light Versa is compatible with virtually any display shelving system, allowing you to achievethe following:

Patent No. US 8,979,311 B2

not shown

Versa connects along power track to allow fast shelf resets along a fixture run.

Existing Fixture Backwith Versa Bus Bar Attached Standard Shelf

Versa ConnectorLEDge Light

Page 33: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

33

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

LLVC(ND) LLVC .... LEDge Light Versa Connector ND .... Nominal Depth 12", 18", 30" (305 mm, 457 mm, 762 mm)

LEDge Light Versa Connector• Complete assembly includes connector and cable• Versa connector needs to be size of shelf or deeper

LLBB(NL) LLBB .... LEDge Light Versa Bus Bar NL .... Nominal Length 46" (1168 mm)

LEDge Light Versa Bus Bar• Fits 54" (1372 mm) back panels, can be

mounted on larger panels in higher position• Can be trimmed to fit shorter panels

LLVY LLVY .... LEDge Light Versa Y-Connector

LEDge Light Versa Y-Connector• Splitter connecting LEDge Light Versa Bus

Bars to power supply• 15" (381 mm) overall length

Page 34: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

34 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Beam LED Canopy Light Gen 3Bid farewell to fluorescent canopy lighting! Our Beam LED Canopy Light is the more energy-efficient alternative, with no damaging UV rays and virtually no heat to degrade packaging. With a lens specially designed for optimum light distribution, BEAM will literally put your merchandise in the best light, attracting more shoppers and boosting your sales.

LLB(NL) LLB .....Beam LED Canopy Light NL .....Nominal Length 36" or 48" (914 mm or 1219 mm)

• 3' and 4' lengths (914 mm and 1219 mm; other sizes available as special order)• Maintenance-free life in excess of 50,000 hours (11 years at 12 hours/day)• Uses same Power Supply and Jumper Cables as LEDge Light• Durable aluminum extrusion• Integrated magnets make installation on metal shelves or other surfaces easy

and allow fast changes• End tabs with holes for fastening to wood canopy and metal canopy brackets• Certified by the DesignLights™ Consortium (DLC) and Underwriters

Laboratories, Inc. (UL) • DLC certification provides potential utility rebates• All plug ’n play connections– no electrician required (Class 2 system)• Multiple units are connected using Jumper Cables or Harness Assembly• May be daisy-chained to single power supply for “single row” applications• 100W power supply can power up to four 48" (1219 mm) lights• Color temperature: 4,200K• Color Rendering Index (CRI) of 85• Contains no heavy metals• Low power consumption helps meet California Title 24 lighting regulations• Safe 24 volt DC system • 3-year warranty• Not compatible with Lumi-M-Stick, Lumiback, or Lumishelf™ accessories

ShelfWidth

PartNumber

ActualLength

PowerConsumption

Max # Lights per100W Power Supply

36" LLB36 34½" 11.3W 848" LLB48 46½" 15.0W 6

Bottom View

46" (1219 mm)

1.96" (50 mm)Top View

Page 35: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

35

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

MOFPTCB(NW)(ND) MOFP .... Maxi Line Overhead Flat Panel TCB .... TV Crossbar NW .... Nominal Width 36" or 48" (914 mm or 1219 mm) ND .... Nominal Depth 6" to 20" in 2" increments (152 mm to 508 mm in 51 mm increments)

TV Crossbar For Maxi Line• Crossbar constructed of 1" x 2" (25 mm x 51 mm) tubing• OPTAB(OPT) attaches to crossbar to display

large screen LCD and plasma televisions• Welded brackets attach to Maxi Line Uprights• Load capacity is 150 lbs

NO TILTDOWN TILT UP TILT

CBMUPTVB CBMUPTVB .....Crossbar Mount Universal TV Bracket

TV Mount for Crossbar• VESA 50/75/100 compatible• Mounts onto any 1" x 2" (25 mm x 51 mm)

crossbar such as RGVDBNH-(NW); ordered separately

• Holds up to 36" (914 mm) screen TVs• Bracket pivots to uptilt, downtilt 8°, or mounts flat at 90°• Load capacity is 50 lbs

Side View

Downtilt Uptilt

2.60"

Page 36: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

36 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Lumiback Panels• Includes acrylic surface with built-in LED lighting system and 5' (1524 mm) long cord• Effectively illuminates graphics or signage• Lumibacks and extension backs are sized to work with standard gondola back sizes– configurations combining pegboard or other 1/4" (6 mm) material, backs, and Lumiback extension backs are possible• Power consumption is approximately 8 watts per vertical foot• Order transformers, backs, and adapter sets separately• Reflector (-R) required for most applications, except where Single Centered and Triple Back Systems

are specified with centered Lumiback• Requires use of Slatwall Center Spanner [SSC-(NW)]

Lumiback Single-Sided Back Panel Extension• Back panels for single-sided applications installed in regular back panel location

LSSBE-(NW)(NH)-R LSSBE .... Lumiback Single Sided Back Extension NW .... Nominal Width 3' or 4' (914 mm or 1219 mm) NH .... Nominal Height 12" to 48" in 6" increments (305 mm to 1219 mm in 152 mm increments) R .... R=Reflector

Lumiback Single-Sided Back Panels• Back panels for single-sided applications

installed in regular back panel location

LSSSB-(NW)(NH)-R LSSSB .... Lumiback Single-Sided Back Panels NW .... Nominal Width 3' or 4' (914 mm or 1219 mm) NH .... Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments) R .... R=Reflector

Lumiback Triple-Back PanelsLSSTB-(NW)(NH)-R LSSTB .... Lumiback Triple-Back Panels NW .... Nominal Width 3' or 4' (914 mm or 1219 mm) NH .... Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments) R .... R=Reflector

Lumiback Triple-Back Panel ExtensionLSSTBE-(NW)(NH)-R LSSTBE .... Lumiback Triple-Back Panel Extension NW .... Nominal Width 3' or 4' (914 mm or 1219 mm) NH .... Nominal Height 12" to 48" in 6" increments (305 mm to 1219 mm in 152 mm increments) R .... R=Reflector

Lumiback Split End Cap

NOTE!Minimum order is ten backs of any size.

Page 37: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

37

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Lumiback Single Back Panel Adapter Set• Adapters for single-sided applications

installed in regular back panel location

Lumiback Panel Adapter Sets• Back Panel Adapter Set (required)• Includes adapter channel for sides of panel• Specify finish (recommended finish is matched to upright)

Lumiback Single Back Panel Adapter Set– Extension• Adapters for single-sided applications

installed in extension back panel location

LSBPAS-(NW)(NH) LSBPAS .....Lumiback Back Panel Adapter Set NW .....Nominal Width 36" or 48" (914 mm or 1219 mm) NH ..... Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)

LSBPASE-(NW)(NH) LSBPASE ..... Lumiback Back Panel Adapter Set– Extension NW .....Nominal Width 36" or 48" (914 mm or 1219 mm) NH ..... Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)

Lumiback

Adapter Channel

Adapter ChannelsSingle SidedRegular Back

Adapter ChannelsSingle Sided

Regular Back–Extension

NOTE!Order the Lumibacks without the "R" - Reflector when used

as a single-centered back where illumination of both sides is desired.

Page 38: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

38 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016LSBPASS-(NW)(NH) LSBPASS .....Lumiback Back Panel Adapter Set– Single Track NW .....Nominal Width 36" or 48" (914 mm or 1219 mm) NH .....Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)

Lumiback Back Panel Adapter Set– Single Track• Adapters for single-centered back applications• Includes both side and top/bottom adapters

LSBPAST-(NW)(NH) LSBPAST .....Lumiback Back Panel Adapter Set– Triple Track NW .....Nominal Width 36" or 48" (914 mm or 1219 mm) NH .....Nominal Height 36" to 72" in 6" increments (914 mm to 1829 mm in 152 mm increments)

LSBPASET-(NW)(NH) LSBPASET .....Lumiback Extension Back Panel Adapter Set– Triple Track NW .....Nominal Width 36" or 48" (914 mm or 1219 mm) NH .....Nominal Height 12" to 48" in 6" increments (305 mm to 1219 mm in 152 mm increments)

Lumiback Back Panel Adapter Set– Triple Track• Adapters for triple-back applications• Includes both side and top/bottom adapters

Lumiback Extension Back Panel Adapter Set– Triple Track• Adapters for triple-back applications installed in extension back panel location• Includes both side and top/bottom adapters

LSBPASES-(NW)(NH) LSBPASES .....Lumiback Extension Back Panel Adapter Set– Single Track NW .....Nominal Width 36" or 48" (914 mm or 1219 mm) NH .....Nominal Height 12" to 48" in 6" increments (305 mm to 1219 mm in 152 mm increments)

Lumiback Extension Back Panel Adapter Set– Single Track• Adapters for single-centered back applications

installed in extension back panel• Includes both side and top/bottom adapters

Centered, Single Back Option

Centered, Single Back Option–

Extension

Triple Back Option–

Extension

Triple Back Option

Page 39: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

39

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

LSST5A LSST .... Transformers for LED Products 5 .... 60 watts, 7.5 vertical feet A .... Adapter

LSS4WC LSS .... Spider Cables for LED Products 4 .... 4 Connections WC .... Wire Connectors

Transformers for Lumi LED Products• Transformers are required for Lumicanopy,

ordered separately• 60-watt capacity, 7.5 vertical feet• Single transformer powers five 36" (914 mm) shelves• UL/CE/CB-Listed• 60" (1524 mm) AC power cord and 72" (1829 mm) DC cord• Cannot be used with LEDge Light

Spider Cables for Lumi LED Products• LSS4WC Spider Cable has 60" (1524 mm) leads,

60" (1524 mm) OC • Spider Cables can be utilized to connect

multiple surfaces or backs to a single transformer

• Refer to transformer information for capacities

Gondola Sign Holder Flush Mount• Mounts to Maxi Line or Luxe upright• Graphics sizes: NW x NH

GSHFM(NW)(NH) GSHFM .... Gondola Sign Holder Flush Mount NW .... Nominal Width 24", 36", or 48" (610 mm, 914 mm, or 1219 mm) NH .... Nominal Height 06" or 12" (152 mm or 305 mm)

Page 40: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

40 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Hypermaxi EUIntroducing a sleeker, more sophisticated solution for retail display and storage! Inspired by European designs, Madix’s new Hypermaxi EU system gives retailers an attractive merchandising platform without sacrificing functionality. This fixture is perfect for generating additional space overhead for stock storage, so you can get the most out of your square footage. Hypermaxi EU can be applied to specific merchandise categories in sections as small as three feet (914 mm), or it can be used universally throughout the store. Your Madix sales representative is available today for consultation on how Hypermaxi EU can benefit your store layouts and merchandising schemes.

A

D

C

E

F

G

(Hidden)B

Page 41: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

41

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

A TL Outrigger FreestandingDisplay Kickplate• Required in each section• Delete Kickplate [KP-(NL)(NH)] or Open Front

Kickplate [OFK-(NL)(NH)], when using TLOFKO

TLOFK(TYPE)-(ND) TLOFK .... TL Outrigger Freestanding Display Kickplate TYPE .... C=Close Kickplate O=Open Kickplate ND .... Nominal Depth 36" or 48" (914 mm or 1219 mm)

B Outrigger for Maxi Line Base Shoe Extender• Fits over standard Maxi Line Base Shoe [BS-(ND)]

ORMLBSE(TYPE)(ND) ORML .... Outrigger for Maxi Line BSE .... Base Shoe Extender TYPE .... I=Intermediate L=Left R=Right ND .... Nominal Width 12", 24", 36" or 48" (305 mm, 610 mm, 914 mm or 1219 mm)

C TL Outrigger Dress Kit• End cover slides over Base Shoe Extender• Base End Covers [BEC-(ND)-(NH)] not

required

TLODK-(ND) TLODK .... TL Outrigger Dress Kit ND .... Nominal Depth 12", 24", 36" or 48" (305 mm, 610 mm, 914 mm or 1219 mm)

D TL Outrigger Shelf SupportAssembly

• Supports TL Outrigger Shelf Deck [TLOSD-(NW)12]

• One required for each left-hand and right-hand side of shelf

TLOSS-(ND) TLOSS .... TL Outrigger Shelf Support Assembly ND .... Nominal Depth 12", 24", 36" or 48" (305 mm, 610 mm, 914 mm or 1219 mm)

NOTE!When the Hypermaxi EU is on a wall or gondola without

any other shelving, use an “intermediate design” leg extender. If the wall/gondola has standard shelving on either side of the Hypermaxi EU, then a left-hand and

right-hand leg extender will be required.

Closed

Open

Intermediateshown

Page 42: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

42 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016E TL T-Rack Top and Bottom Tie

• One required at the top for each section

TLTRTAZ(NW) TLTRTA .... TL T-Rack Top and Bottom Tie Z .... No Back NW .... Nominal Depth 36" or 48" (914 mm or 1219 mm)

F Outrigger for Maxi Line Post• Available with slotting on both sides or no

front slotting on the front-facing post• Load capacity is 1250 lbs

ORMLP(NH)(OPT) ORMLP .... Outrigger for Maxi Line Post NH .... Nominal Height 78"-108" in 6" increments 1981 mm-2743 mm in 152 mm increments OPT .... Blank=Slotted Both Sides NFS=No Front Slotting

G TL Outrigger Shelf Deck• Shelves are 12" (305 mm) deep • For a 24" deep shelf, order two TL Outrigger Shelf Deck• The same shelf is used for center and base shelves• Load capacity is 300 lbs per 12" (305 mm) shelf

TLOSD-(NW)12 TLOSD .... TL Outrigger Shelf Deck NW .... Nominal Depth 12", 36" or 48" (610 mm, 914 mm, or 1219 mm) 12 .... Nominal Depth 12" (305 mm)

Page 43: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

43

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Lift and Drop GraphicsThis versatile sign channel can be mounted using either fixed or adjustable brackets (directly to the upright, if so desired). With adjustable brackets, the graphic panel can be installed and tilted at either a 90° or 15° angle.

A Lift and Drop Graphics Header Sign Channel• Can be mounted using adjustable brackets,

Lift and Drop Graphics Header Bracket Assembly [LDGHBA(NH)(14-24)(HAND)]

• Attaches directly to upright or mounts using Fixed Brackets [SBOEPP-(ND)]• Graphic Panel can be installed flat at 90° or

tilted down at 15° when using adjustable brackets

• Customer-supplied graphics can wrap around on adjustable returns

• Graphic sizes: NW x NH• Sign can be no thicker than 1/16" (2 mm)

LDGHSC(NW)(NH)LDGHSC .....Lift and Drop Graphics Header Sign Channel NW .....Nominal Width 24", 36", or 48" (610 mm, 914 mm, or 1219 mm) NH .....Nominal Height 0500=5" (127 mm) 0600=6" (152 mm) 0800=8" (203 mm) 1025=101/4" (260 mm) 1600=16" (406 mm)

LDGHBA(NH)(14-24)(HAND)LDGHBA .....Lift and Drop Graphics Header Bracket Assembly NH .....Nominal Height 0500=5" (127 mm) 0600=6" (152 mm) 0800=8" (203 mm) 1025=101/4" (260 mm) 1600=16" (406 mm) 14-24 .....Nominal Depth Range 14" to 24" (356 mm to 610 mm) Hand .....R=Right Hand L=Left Hand

B Lift and Drop Graphics Header Bracket Assembly• Graphic Panel can be installed flat at 90° or

tilted down at 15° when using adjustable brackets

• Customer-supplied graphics can wrap around on adjustable returns

• Order left hand and right hand as facing section• Center uprights can use either left-hand or right-hand bracket• Graphic sizes: NH x ND• Sign can be no thicker than 1/16" (2 mm)

SBOEPP-(ND) SBOEPP .....Straight in Bracket ND .....Nominal Depth 04" to 24" in 2" increments (102 mm to 610 mm in 51 mm increments)

Straight in Bracket• Can be used with LDGHSC(NW)(NH)• Order left hand and right hand as facing section• Hardware pack included• Order in pairs

A A

B B90°15°

Page 44: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

44 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Lift and Drop Graphics Holder Wall Signage End Panel• Easy-to-install signs can be placed in the end panel from the front by bowing in, or

dropped in from the top of the panel• Easy-bend tab bracket eliminates the need

to order left hand and right hand panel• Graphic sizes: 9 Sign height=nominal height-base height (5" or 7", 127 mm or 178 mm) 9 Sign can be no thicker than 1/16" (2 mm)Sign depth=nominal depth-1/8" (3 mm)• Sign can be no thicker than .260" (6 mm)• The Lift and Drop Graphics Header Sign

Channel [LDGHSC(NW)(NH] can be mounted to the top front of the panels

LDGHWSEP(NH)(ND)-(BH) LDGH .... Lift and Drop Graphics WSEP .... Wall Signage End Panel NH .... Nominal Height 60", 72", 84", or 90" (1524 mm, 1829 mm, 2134 mm, or 2286 mm) ND .... 12" or 18" (305 mm or 457 mm) BH .... Base Height Blank=5" (127 mm) 7=7" (178 mm)

Page 45: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

45

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Custom solutions available for volume purchasing

Madix Custom Manufacturing SolutionsCustom solutions are sometimes the best way to reach a specific market or audience. That's why Madix works with you to create and design custom point-of-sale displays to meet your specific needs. From specially branded end caps to market-based freestanding displays, Madix is here to help you lift sales in every way. If you can dream it, we can create it. Put innovation on display.

Page 46: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

46 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016

Custom solutions available for volume purchasing

Page 47: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

47

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Part Name Part Number Page NumberBBeam LED Canopy Light Gen 3 ............................................... LLB(NL) ............................................................ 34BOPIS - Buy Online, Pick Up in Store ....................................................................................................................3FFitting Room .........................................................................................................................................................5GGondola Sign Holder Flush Mount ........................................ GSHFM(NW)(NH) ............................................ 39HHypermaxi EU .................................................................................................................................................... 40LLEDge Light Cable Clamp ....................................................... LLCC38-25 ........................................................ 31LEDge Light Cable Clamp Magnetic ...................................... LCCCM-(OPT) ................................................... 31LEDge Light Deck Support Mounting Clip ............................. LLDSMC ............................................................ 31LEDge Light Gen3 ................................................................... LLS(NL) ............................................................. 30LEDge Light Harness Assembly.............................................. LLHA ................................................................. 31LEDge Light Jumper Cable ..................................................... LLJ(NL) ............................................................. 31LEDge Light Power Supply ..................................................... LLPS .................................................................. 31LEDge Light Versa .............................................................................................................................................. 32LEDge Light Versa Bus Bar ...................................................... LLBB(NL) .......................................................... 33LEDge Light Versa Connector ................................................. LLVC(ND) .......................................................... 33LEDge Light Versa Y-Connector .............................................. LLVY .................................................................. 33Lift and Drop Graphics Header Bracket Assembly ................ LDGHBA(NH)(14-24)(HAND) ......................... 43Lift and Drop Graphics Header Sign Channel ........................ LDGHSC(NW)(NH) ........................................... 43Lift and Drop Graphics Holder Wall Signage End Panel ........ LDGHWSEP(NH)(ND)-(BH) ............................. 44Lighted Upper Shelf Assembly ............................................... LUSA(OPT1)-(NW)(ND)-(OPT2) ..................... 16Lumiback Back Panel Adapter Set– Single Track .................. LSBPASS-(NW)(NH) ........................................ 38Lumiback Back Panel Adapter Set– Triple Track ................... LSBPAST-(NW)(NH) ........................................ 38Lumiback Extension Back Panel Adapter Set– Single Track LSBPASES-(NW)(NH) ...................................... 38Lumiback Extension Back Panel Adapter Set– Triple Track .. LSBPASET-(NW)(NH) ...................................... 38Lumiback Single Back Panel Adapter Set .............................. LSBPAS-(NW)(NH) .......................................... 37Lumiback Single Back Panel Adapter Set– Extension ......... LSBPASE-(NW)(NH) ........................................ 37Lumiback Single-Sided Back Panel Extension ...................... LSSBE-(NW)(NH)-R ......................................... 36Lumiback Single-Sided Back Panels ...................................... LSSSB-(NW)(NH)-R ......................................... 36Lumiback Triple-Back Panel Extension .................................. LSSTBE-(NW)(NH)-R ....................................... 36Lumiback Triple-Back Panels .................................................. LSSTB-(NW)(NH)-R ......................................... 36Luxe ..................................................................................................................................................................... 18Luxe 45° Corner Shelf .............................................................. LUQSUS45-10 .................................................. 27Luxe Back Panels ..................................................................... LUXB(TYPE)(NH)(NW) .................................... 19Luxe Backing Locking Insert ................................................... LUXBLI-BLK ...................................................... 24Luxe Queuing Fixture Post Connector Rail ............................ LUQFPCR(NW)(OPT) ....................................... 24Luxe Queuing Hardboard Back 45° ........................................ LUQB45(BACK1)(BACK2)DP(NW)(NH) .......... 29Luxe Queuing Hardboard Backs on Two (2) Sides................. LUQB(OPT)DP(NW)(NH) ................................. 22Luxe Queuing MegaWall™ Back 45° ..................................... LUQB45MW(NW)(NH) ................................... 28Luxe Queuing MegaWall™ Backs on Two (2) Sides .............. LUQBMW(NW)(NH) ........................................ 23Luxe Queuing Pegboard Backs on Two (2) Sides .................. LUQB(OPT)DP(NW)(NH) ................................. 22Luxe Queuing Post Slotted on Four (4) Sides ........................ LUQP(NH)S4 ..............................................21, 27Luxe Queuing Post Slotted on Two (2) Sides ......................... LUQP(NH)S2 .................................................... 21Luxe Queuing Retractable Retainer ....................................... LUQRR .............................................................. 24Luxe Queuing Slatwall Back 45° ............................................ LUQB45(BACK1)(BACK2)(OPT)(NW)(NH) ..... 28Luxe Queuing Slatwall Backs on One Side ............................ LUQB(B1)SP(NW)(NH) ................................... 23Luxe Queuing Slatwall Backs on Two Sides ........................... LUQB(B1)(B2)DP(NW)(NH) ............................ 23Luxe Queuing Solution ...................................................................................................................................... 20Luxe Queuing Wire Grid Back 45° .......................................... LUQB45(TYPE)(OPT)(NW)(NH) ...................... 29Luxe Queuing Wire Grid Backs w/ One Panel Per Section .... LUQB(TYPE)SP(NW)(NH) ............................... 23Luxe Queuing Wire Grid Backs w/ Two Panels Per Section ... LUQB(TYPE)DP(NW)(NH) ............................... 24Luxe Queuing: 45-Degree Inside Corner Panel and Shelf ............................................................................... 26Luxe T-Uprights with Leg on Both Sides ................................ LUXT-(NH)(NDL)(NDR)(OPT) .......................... 19Luxe Tie Bar .............................................................................. LUXTB-(NW) .................................................... 19

MMaxi Grid ...............................................................................................................................................................6Maxi Grid Anti-Sway Braces Regular-Duty & Seismic .......... GPASTBA(OPT)(NL) ............................................8Maxi Grid Back Slatwall .......................................................... GPBSW(TYPE)(NW)(NH) ................................ 11Maxi Grid Fixture Panel ........................................................... GPWFP(ND)(NH)(OPT) ......................................8Maxi Grid Front Kickplate ....................................................... GPGKB(NW) .................................................... 10Maxi Grid Heavy-Duty Wire Grid Shelf................................... GPHDWGS(NW)(ND) .........................................9Maxi Grid Heavy-Duty Wire Top Shelf with Lip ..................... GPHDWTS(NW)(ND)04 .....................................9Maxi Grid Inset Slatwall Spacer .............................................. GPISWSP .......................................................... 11Maxi Grid Reinforcement Bar ................................................. GPRB(NW) ....................................................... 10Maxi Grid Side Kickplate ......................................................... GPSB(NW) ....................................................... 10Maxi Grid Slatwall Combo Channel ....................................... GPSWCC(NW) .................................................. 11Maxi Grid Slatwall Side Retainer ............................................ GPSWSR(NH) ................................................... 11Maxi Grid Slatwall Top Channel ............................................. GPSWTC(NH) ................................................... 11Maxi Grid Tempered Glass Shelves......................................... GPTGSB(NW)(ND) ........................................... 10Maxi Grid Upright Bracket ...................................................... GPUBO ................................................................8Maxi Grid Wire Basket Lip Shelf.............................................. GPWBLS(NW)(ND)(NH).....................................9Maxi Grid Wire Fixture Panel Plastic Top or Bottom Cap ....... GPWFPTC-(OPT)-CL ...........................................8Maxi Grid Wire Front Lip ......................................................... GPWFL(NW)(NH) ............................................ 10Maxi Grid Wire Shelf................................................................ GPWGS(NW)(ND) ..............................................9Maxi Grid Wire Top Shelf with Lip .......................................... GPWTS(NW)(ND)(NH) .......................................9Maxi Grid Wood Shelf Board .................................................. GPWSB(OPT1)(NW)(ND)-(OPT) ..................... 10Mobile Storage System ........................................................................................................................................4OOutrigger for Maxi Line Base Shoe Extender ........................ ORMLBSE(TYPE)-(ND) .................................... 41Outrigger for Maxi Line Post................................................... ORMLP(NH)(OPT) ............................................ 42SShoe Solutions ......................................................................................................................................................5Spider Cables for Lumi LED Products ..................................... LSS4WC ............................................................ 39Standard Upper Shelf ............................................................. SUS-(NW)10 .................................................... 27Stick-on Clear Bumper ............................................................ BSOC50 ............................................................ 10Straight in Bracket .................................................................. SBOEPP-(ND) ................................................... 43TTL Outrigger Dress Kit ............................................................. TLODK-(ND) ..................................................... 41TL Outrigger Freestanding Display Kickplate ........................ TLOFK(TYPE)-(ND)........................................... 41TL Outrigger Shelf Deck .......................................................... TLOSD-(NW)12 ................................................ 42TL Outrigger Shelf Support Assembly ................................... TLOSS-(ND) ...................................................... 41TL T-Rack Top and Bottom Tie ................................................ TLTRTAZ(NW) .................................................. 42Transformers for Lumi LED Products ...................................... LSST5A ............................................................. 39Tube Line Metal Shelf ............................................................. TLMS(OPT1)(NW)(ND) ................................... 17Tube Line Pull-Out Demo Display .......................................... TLUPODD(NW)1016(OPT) .............................. 17Tube Line Universal Pull-Out Demo Display End Panel ........ TLUPODDEP(NH)1016(OPT) ........................... 17TV Crossbar For Maxi Line ....................................................... MOFPTCB(NW)(ND) ........................................ 35TV Mount for Crossbar ............................................................ CBMUPTVB ...................................................... 35VVesta™ ................................................................................................................................................................ 12Vesta™ Fixture Base Drawer ................................................... UFBD(NW)(ND)(NH) ....................................... 16Vesta™ Fixture Display Table .................................................. UFDT(NW)(ND)(NH)(OPT1)(OPT2) ................ 15Vesta™ Fixture Divider Panel Upright Slotted End Frame .... UFDPUSEF(NW)(NH)(OPT) ............................. 15Vesta™ Fixture Gondola Core ................................................. UFGC(NW)(NH)(OPT1)(OPT2) ........................ 14Vesta™ Fixture Gondola Core with Offset Slots ..................... UFGCOS(NW)(NH)(OPT1)(OPT2).................... 15Vesta™ Fixture Shelf................................................................ UFUSA(OPT1)-(NW)(ND)(OPT1) .................... 16Vesta™ Fixture Upright Divider Panel, End and Int. .............. UFDPU(OPT1)(NW)(NH)(OPT2) ..................... 14Vesta™ Fixture Wall Divider Panel Upright End or Int. .......... UFWDPU(OPT1)(NW)(NH)(OPT2) ................. 14

Part Name Part Number Page Number

Page 48: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

48 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016Part Number Part Name Page NumberBBSOC50 ................................................... Stick-on Clear Bumper ......................................................................10CCBMUPTVB ............................................. TV Mount for Crossbar ......................................................................35FFDUSMP(OPT)(NW)(ND) ....................... Flip Down Upper Shelf Merchandising Panel .................................48GGPASTBA(OPT)(NL) ................................ Maxi Grid Anti-Sway Braces Regular-Duty & Seismic ......................8GPBSW(TYPE)(NW)(NH) ....................... Maxi Grid Back Slatwall ....................................................................11GPGKB(NW) ........................................... Maxi Grid Front Kickplate..................................................................10GPHDWGS(NW)(ND) ............................. Maxi Grid Heavy-Duty Wire Grid Shelf ...............................................9GPHDWTS(NW)(ND)04 ......................... Maxi Grid Heavy-Duty Wire Top Shelf with Lip .................................9GPISWSP ................................................. Maxi Grid Inset Slatwall Spacer ........................................................11GPRB(NW) .............................................. Maxi Grid Reinforcement Bar ...........................................................10GPSB(NW) .............................................. Maxi Grid Side Kickplate ...................................................................10GPSWCC(NW) ........................................ Maxi Grid Slatwall Combo Channel .................................................11GPSWSR(NH).......................................... Maxi Grid Slatwall Side Retainer ......................................................11GPSWTC(NH) .......................................... Maxi Grid Slatwall Top Channel ........................................................11GPTGSB(NW)(ND) .................................. Maxi Grid Tempered Glass Shelves ...................................................10GPUBO .................................................... Maxi Grid Upright Bracket ..................................................................8GPWBLS(NW)(ND)(NH) ........................ Maxi Grid Wire Basket Lip Shelf ..........................................................9GPWFL(NW)(NH) ................................... Maxi Grid Wire Front Lip ...................................................................10GPWFP(ND)(NH)(OPT) .......................... Maxi Grid Fixture Panel .......................................................................8GPWFPTC-(OPT)-CL ............................... Maxi Grid Wire Fixture Panel Plastic Top or Bottom Cap ...................8GPWGS(NW)(ND) .................................. Maxi Grid Wire Shelf ............................................................................9GPWSB(OPT1)(NW)(ND)-(OPT) ............ Maxi Grid Wood Shelf Board ............................................................10GPWTS(NW)(ND)(NH) ........................... Maxi Grid Wire Top Shelf with Lip.......................................................9GSHFM(NW)(NH)................................... Gondola Sign Holder Flush Mount ...................................................39LLCCCM-(OPT) .......................................... LEDge Light Cable Clamp Magnetic ................................................31 LDGHBA(NH)(14-24)(HAND) ................ Lift and Drop Graphics Header Bracket Assembly ..........................43LDGHSC(NW)(NH) ................................. Lift and Drop Graphics Header Sign Channel ..................................43LDGHWSEP(NH)(ND)-(BH).................... Lift and Drop Graphics Holder Wall Signage End Panel ..................44LLB(NL) ................................................... Beam LED Canopy Light Gen 3 .........................................................34LLBB(NL) ................................................. LEDge Light Versa Bus Bar ................................................................33LLCC38-25 ............................................... LEDge Light Cable Clamp .................................................................31LLDSMC................................................... LEDge Light Deck Support Mounting Clip .......................................31LLHA........................................................ LEDge Light Harness Assembly ........................................................31LLJ(NL) .................................................... LEDge Light Jumper Cable ...............................................................31LLPS ........................................................ LEDge Light Power Supply ...............................................................31LLS(NL) ................................................... LEDge Light Gen3..............................................................................30LLVC(ND) ................................................. LEDge Light Versa Connector ...........................................................33LLVY ........................................................ LEDge Light Versa Y-Connector ........................................................33LSBPAS-(NW)(NH) ................................. Lumiback Single Back Panel Adapter Set ........................................37LSBPASE-(NW)(NH) ............................... Lumiback Single Back Panel Adapter Set– Extension....................37LSBPASES-(NW)(NH) ............................. Lumiback Extension Back Panel Adapter Set– Single Track ..........38LSBPASET-(NW)(NH) ............................. Lumiback Extension Back Panel Adapter Set– Triple Track ............38LSBPASS-(NW)(NH) ............................... Lumiback Back Panel Adapter Set– Single Track ............................38LSBPAST-(NW)(NH) ............................... Lumiback Back Panel Adapter Set– Triple Track .............................38LSS4WC .................................................. Spider Cables for Lumi LED Products ...............................................39LSSBE-(NW)(NH)-R ............................... Lumiback Single-Sided Back Panel Extension ................................36

LSSSB-(NW)(NH)-R ............................... Lumiback Single-Sided Back Panels ................................................36LSST5A .................................................... Transformers for Lumi LED Products ................................................39LSSTB-(NW)(NH)-R ............................... Lumiback Triple-Back Panels ............................................................36LSSTBE-(NW)(NH)-R ............................. Lumiback Triple-Back Panel Extension ............................................36LUQB(B1)(B2)DP(NW)(NH) .................. Luxe Queuing Slatwall Backs on Two (2) Sides ...............................23LUQB(B1)SP(NW)(NH) .......................... Luxe Queuing Slatwall Backs on One (1) Side .................................23LUQB(OPT)DP(NW)(NH) ....................... Luxe Queuing Hardboard Backs on Two (2) Sides ...........................22LUQB(OPT)DP(NW)(NH) ....................... Luxe Queuing Pegboard Backs on Two (2) Sides ............................22LUQB(TYPE)DP(NW)(NH) ...................... Luxe Queuing Wire Grid Backs with Two (2) Panels Per Section ....24LUQB(TYPE)SP(NW)(NH) ...................... Luxe Queuing Wire Grid Backs with One (1) Panel Per Section......23LUQB45(BACK1)(BACK2)(OPT)(NW)(NH) . Luxe Queuing Slatwall Back 45° ......................................................28LUQB45(BACK1)(BACK2)DP(NW)(NH) ...... Luxe Queuing Hardboard Back 45° ..................................................29LUQB45(TYPE)(OPT)(NW)(NH)............. Luxe Queuing Wire Grid Back 45° ....................................................29LUQB45MW(NW)(NH) .......................... Luxe Queuing MegaWall™ Back 45° ................................................28LUQBMW(NW)(NH)............................... Luxe Queuing MegaWall™ Backs on Two (2) Sides ........................23LUQFPCR(NW)(OPT) .............................. Luxe Queuing Fixture Post Connector Rail.......................................24LUQP(NH)S2 ........................................... Luxe Queuing Post Slotted on Two (2) Sides ...................................21LUQP(NH)S4 ........................................... Luxe Queuing Post Slotted on Four (4) Sides ............................21, 27LUQRR ..................................................... Luxe Queuing Retractable Retainer .................................................24LUQSUS45-10 ......................................... Luxe 45° Corner Shelf ........................................................................27LUSA(OPT1)-(NW)(ND)-(OPT2) ............ Lighted Upper Shelf Assembly .........................................................16LUXB(TYPE)(NH)(NW) ........................... Luxe Back Panels ...............................................................................19LUXBLI-BLK............................................. Luxe Backing Locking Insert .............................................................24LUXT-(NH)(NDL)(NDR)(OPT) ................. Luxe T-Uprights with Leg on Both Sides ..........................................19LUXTB-(NW) ........................................... Luxe Tie Bar ........................................................................................19MMOFPTCB(NW)(ND) ............................... TV Crossbar For Maxi Line .................................................................35OORMLBSE(TYPE)-(ND) ........................... Outrigger for Maxi Line Base Shoe Extender ..................................41ORMLP(NH)(OPT) .................................. Outrigger for Maxi Line Post .............................................................42SSBOEPP-(ND) .......................................... Straight in Bracket .............................................................................43SUS-(NW)10 ........................................... Standard Upper Shelf........................................................................27TTLMS(OPT1)(NW)(ND) .......................... Tube Line Metal Shelf .......................................................................17TLODK-(ND) ............................................ TL Outrigger Dress Kit .......................................................................41TLOFK(TYPE)-(ND) ................................. TL Outrigger Freestanding Display Kickplate ..................................41TLOSD-(NW)12 ...................................... TL Outrigger Shelf Deck ....................................................................42TLOSS-(ND) ............................................. TL Outrigger Shelf Support Assembly .............................................41TLTRTAZ(NW) ......................................... TL T-Rack Top and Bottom Tie ...........................................................42TLUPODD(NW)1016(OPT) ..................... Tube Line Pull-Out Demo Display ....................................................17TLUPODDEP(NH)1016(OPT) .................. Tube Line Universal Pull-Out Demo Display End Panel ..................17UUFBD(NW)(ND)(NH) .............................. Vesta™ Fixture Base Drawer .............................................................16UFDPU(OPT1)(NW)(NH)(OPT2) ............ Vesta™ Fixture Upright Divider Panel, End and Intermediate........14UFDPUSEF(NW)(NH)(OPT) .................... Vesta™ Fixture Divider Panel Upright Slotted End Frame ..............15UFDT(NW)(ND)(NH)(OPT1)(OPT2) ....... Vesta™ Fixture Display Table ............................................................15UFGC(NW)(NH)(OPT1)(OPT2) ............... Vesta™ Fixture Gondola Core ............................................................14UFGCOS(NW)(NH)(OPT1)(OPT2) .......... Vesta™ Fixture Gondola Core with Offset Slots ...............................15UFUSA(OPT1)-(NW)(ND)(OPT1) ........... Vesta™ Fixture Shelf ..........................................................................16UFWDPU(OPT1)(NW)(NH)(OPT2) ........ Vesta™ Fixture Wall Divider Panel Upright End or Intermediate ...14

Part Number Part Name Page Number

Page 49: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

49

Innovation on Display 2016

Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Page 50: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

50 Texas: 800-776-2349 Fax: 972-563-0792 Alabama: 800-633-6282 Fax: 256-839-5608Mexico: 001-800-010-0699 www.madixinc.com

Prices and specifications subject to change without notice. Not responsible for errors or omissions in printing. © 2016 Madix, Inc. All Rights Reserved.

Innovation on Display 2016

Page 51: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

FITTING ROOM

ENHANCE THECUSTOMER’S EXPERIENCE

Page 52: Order. - Madix, Inc.madixinc.com/assets/pdf/catalogs/InnovativeProducts2016-web.pdf · in all Wire Fixture Panels height (as shown) • Part number listed is for two Anti-Sway Braces

Rev. 2/16

Texas 500 Airport Road, Terrell, TX 75160 | 800.776.2349Alabama 20984 Alabama Hwy. 9, Goodwater, AL 35072 | 800.633.6282

At Madix, we get it. You've got challenges; we have innovative solutions. For sixty years, we have provided

retailers with everything from display shelving to back-room storage systems. Our products are designed

to optimize space, increase visibility of merchandise, and boost sales performance. For your ordering

convenience, we offer a wide range of cataloged options, but we’re also very open to custom designs

to better address your needs. We look forward to helping you find a creative approach to your various

merchandising and store-design challenges.

About Madix

Learn more @ www.madixinc.com


Recommended