Oregon Ballistic Laboratories (OBL) is an NIJ Certified, National Voluntary Laboratory Accreditation Program (NVLAP) accredited body armor testing laboratory (NVLAP Lab Code 200826-0) capable of performing all portions of NIJ Standard 0101.06, including the hard and soft armor environmental conditioning cycles. OBL is also certified by the US Army Aberdeen Test Center to perform testing in the Hard Armor and Soft Armor commodity areas. The paring of skilled staff and specialty equipment allows OBL to provide rapid test results with unparalleled precision. From the initial R&D process to final certification, OBL is dedicated to the success of our body armor customers by providing prompt and accurate data.
ARMORED SHIRT • Low profile
• Compression shirt
• Mesh pockets for soft armor panels
• Breathable Mesh provide more comfort
• Accepts front, back, and side protection
CONCEAL CARRY ARMORED SHIRT • Low profile
• Compression shirt
• Mesh pockets for soft armor panels
• Breathable Mesh provide more
comfort
• Accepts front, back, and side
protection
• 2 Durable Fabric Pockets under
each arm for handgun, mags, etc.
• Shoulder yoke evenly distributes
firearm weight
• Extremely Strong seams
CONCEAL CARRY SHIRT • 2 Durable Fabric Pockets under each
arm for handgun, mags, etc.
• Shoulder Yoke evenly distributes firearm
weight
• Extremely Strong seams
• Anti-microbial
• High Quality Neoprene inner Layer to keep you cool.
SHIRTS ARE AVAILABLE IN BLACK AND WHITE AND
SIZES Small through 5XL !
VESTS ARE AVAILABLE IN BLACK, OD GREEN, AND
COYOTE. (ONE SIZE FITS MOST)
IIIA
IIIA IIIA
IIIA
Includes • Tactical Vest • Armored Shirt • 4 IIIA Panels
Model #LSS-IIIASOFT
Model #LSS-IIIADT
LEGACY DUAL THREAT PANEL • 11 x 14, 10 X 12, 6 X 8, 6 X 6 • Shooter cut, Square cut, or cut to
specifications • Waterproof • Stops all IIIA threats and Stab spike E1 &
E2 • Weight - 10 X 12 size is 1.55lbs (0.70kg) • Best BFD on the market • NIJ Lab tested (OBL) 0101.06 & Spike
0115.00 • Multiple array/design US patented to
RMA
LEGACY LEVEL IIIA PANEL • 11 X 14, 10 X12, 6 X 8, 6 X 6 • Shooter cut, Square cut, or cut to
specification • Weight: 10 X 12 - 1.25lbs (0.56kg) • Best BFD ratings on the market • NIJ certified NIJ 010106
LEGACY LEVEL III PLATE • 10”W X 12”H X 1”D • Swimmer’s cut • Single curve • Waterproof • Positive buoyancy • 3.2lbs • Tested by a NIJ CERTIFIED LAB for
NIJ.06 requirements
Model #LSS-III
LEGACY LEVEL IV PLATE • 10”W X 12”H X 1”D • Silicon Carbide • Multi-hit (.30-06 M2AP round tested by a
NIJ Certified Laboratory) • Multiple array/design US patented to RMA • 600 denier polyester urethane wrap
(making it water resistant) • Swimmer’s cut • Single curve • 5.2lbs
Model #LSS-IV
IIIA
IV
IIIA HARD SHIELD • NIJ IIIA 0108.01 compliance
Ballistics standard • Shield and View Port pass all
IIIAs threats, including 9mm, 44 mag, 357sig
• 24X46 inches (600mmX900mm)
IIIA COLLAPSIBLE SOFT SHIELD with CARRY BAG
• NIJ IIIA 0108.01 compliance Ballistics standard
• Passes all IIIA threats, including 9mm, 44mag, 357sig
• Over 5 feet tall • Molle attachments • Carry Bag for ease of use.
(Easy assemble)
IIIA FACE SHIELDS
• NIJ IIIA 0108.01 compliance Ballistics standard
• Standard one size fits all, clamp version and tactical version for rail attachment
• Fits PASGT, MICH, and SpecOp helmet styles
• 3.3lbs (1.5kg)Clamp - 3lbs (1.4kg) Tactical
LEVEL II/IIIA FULL COVERAGE VESTS • Designed to wear over your
clothing
• 900D Nylon
• NIJ 0101.06 compliant
• Available with or without
MOLLE
• Additional Pockets front and
back to accept hard plates for added protection
• 100% full coverage as the
sides overlap to ensure there is no exposure areas on the side
• Weight: 3-6.5lbs depending on size selection
• Available up to Size 5XL
LEVEL II/IIIA SECURITY VEST
• Simple conceal carry design
• Full coverage Level II or IIIA protection
• NIJ 0101.06 compliant
• Available in black or white
• Weight: 3-6.5lbs depending on size
• See size chart on our website
• 2 front chest pockets
• MOLLE Shoulders
CUSTOM MADE VEST • Ability to custom make any vest design
• Low Minimum Quantities are needed to accept
your project
• We love working and designing new vests
• Fast Turnaround times
• Contact us for more details
Model #LSS-TACVEST
TACTICAL VESTS • 900 Denier Nylon
• Lightweight with quick release strapping
• Removable Cummerbund
• Accepts hard and soft in various sizes
• Quick release strapping
• Accepts side plates 6 x 6 and 6 x 8
• One size fits most
• Ask us about our BIG BOY vests
• Available in black, blue, coyote, and green
LEVEL II/IIIA CONCEAL VESTS • Simple conceal carry design
• Full coverage Level II or IIIA protection
• NIJ 0101.06 compliant
• Available in black or white
• Weight: 3-6.5lbs depending on
size
• See size chart on our website
• Internal pockets front and back to
accept hard plates for added protection
PASGT • NIJ0101.06 – Level IIIA
• Tested for Penetration and back face defor-
mation
• Standard PASGT design (MIL-H-44099A)
• Defeated Calibers: 357 Magnum Rifle, 44 Mag
Rife, 9mm, .357, 50 S&W FMJ
• Dimensions: Shell Thickness 7.3 + / - 0.8 Weight
2.9lbs
• (NSN 8470-01-092-7526)
MICH
• NIJ0101.06 – Level IIIA
• Increased Area of coverage over the ears and
back of the helmet
• Ergonomic and stable platform
• Standard MICH/ACH Pads and Suspension
Fixed Side Rails for mounting
• Front Wilcox NVG mounting Shroud
• Level IIIA Protection NIJ 0101.06
• Fragmentation protection US MIL STD 662F
V50 at 2150 ft/sec
FAST
• NIJ0101.06 – Level IIIA
• Increased area of coverage over the ears and back of the helmet
• Ergonomic and stable platform
• Standard MICH/ACH Pads and Suspension Fixed side rails for mounting accessories
• Front Wilcox NVG mounting shroud
• Level IIIA Protection NIJ 0101.06
• Fragmentation Protection US MIL STD 662F V50 at 2150 ft/sec
Model #LSS-PASGT
Model #LSS-MICH
Model #LSS-FAST
IIIA ARMORED BACK PACK • Green, Black, and Coyote
• 1000 Denier Nylon
• Lots of pockets and MOLLE
• Add Legacy Safety armor
solutions to any bag
IIIA CLIPBOARDS • IIIA NIJ.06 compliant
• Stops all IIIA threats, including
44mag, 357sig
• Roughly 3-4lbs, depending on size
• 10 X 12 and 11 X 14 available
• 1-2 shot capable
VELCRO PATCHES and MORE
Legacy Safety & Security 4917 Main Court Davenport, IA 52806 309-235-9552 [email protected]
Or Visit one of our Distributors at:
Stun and Run Self Defense
Michael Faircloth
Minneapolis, MN 55408
612-217-2335
www.srselfdefense.com
Rather Be Safe Security, LLC
Doug Rather
317-435-3306
Military Consulting Solutions
Kerry Dennard, President
703-302-0033
ww.militaryconsultingsolutions.com
Masada Tactical
1414 Reistertown Road
Second Floor
Baltimore, MD 21208
Redemption Armor, LLC
Susan Miron, CEO
Tel: 860-836-0301
Email: [email protected]
Or
Erik Hansen, Executive Director
Tel: 860-214-1943
Email: [email protected]
www.RedemptionArmor.com
Cindy Colmer
Panther Uniforms, Inc. (Open to the public)
1609 2nd Avenue
Rock Island, IL 61201
309-793-4164
Defense Optics Group
John Griffith
650 Kingston Rd
Pickering, Canada