OrigamX Medi-O 2021 · 2021. 2. 10. · origamx.com KEY FEATURES Protected by US and International...

MEDI-O

TABLE OF CONTENTS

Medi-O Fixture Overview

Medi-O Fixture Operation

Medi-O Product Overview 3

Medi-O Specifications 4

DMX/RDM Mode 5

Advanced DMX/RDM Options 5

DMX Channel Layout 6

RDM Command List 6

4CA CCT Mode 7

Medi-O Power OptionsOrigamX Hub 8

Track Mounted 8

Stand Alone 9

Cat5e Pinout Chart 9

OrigamX SupportFCC Warning 10

General Precautions 10

Warranty 10

Medi-O Ordering OptionsMedi-O Fixture Order Sheet 11

Track Knuckle Mounting Options 12

Monopoint Knuckle Mounting Options 14

Pendant Mounting Options 16

Stem Mounting Options 18

High Performance FixtureMEDI-O

origamx.com

origamx.com

KEY FEATURESProtected by US and International Patents.

ORIGAMX LIGHT FIXTURESHigh Performance FixtureMEDI-O

The OrigamX Medi-O lighting system was developed for the world's most creative Architects and most critical technical Lighting Designers to enable them to achieve the highest quality of light in the most diverse range of applications - including museums, high-end residential and retail.

The name OrigamX is a combination of Origami, the art of folding flat objects into alternate forms and structures, and “X” to highlight the technology.

OrigamX starts as a proprietary flat, flexible circuit card and is folded into a new form factor to create the most advanced LED light engine available today. Patented Hybrid Driver Circuitry provides unique DMX/RDM control features - including Ludicrous Mode, master dimmer, up to 16khz PWM, and incredibly smooth, theatrical grade dimming to 0%.

Specifiers use an online configurator to select from tunable CCT, RGBA and Fixed White, fixed or zoom optics and a range of housings and mounting options to fit their needs.

Advanced Control OptionsPatented Hybrid Driver Circuitry provides unique control features - including Ludicrous Mode, master dimmer control, up to 16khz PWM,adjustable total wattage (for LEEDs compliance) and incredibly smooth, theatrical grade dimming to 0%.

Satisfied LDs and ArchitectsModular design allows Lighting Designers, End Users and Architects/Interior Designers to collaborate on housing, mounting and lighting specs using an online application…not complicated data sheets and long SKUs.

High Output. Tiny PackageUltra-compact, modular form factor uses Black Tank’s patented heat sink to provide a superior 16 watts and extended LED lifetime in a compact 2” diameter fixture.

DMX and 100% Compliant RDMBlack Tank’s theatrical grade dimming technology has been used on Broadway and in critical dynamic environments around the world.

Quality of LightProprietary binning, integral color calibration, the highest quality optics and cutting edge solid-state zoom option provides LDs with a next-generation tool for a variety of applications.

Ludicrous ModeIncreases brightness (up to 4x) of any color or CCT without sacrificing LED lifetime and enables tunable white light fixtures to operate at full power output at any CCT setting – eliminating the need to select a specific fixed color temperature in manufacturing.

Color Mixing RGBA

Color Mixing RGBA Can Effortlessly Produce 16 Million Colors

Tuneable White

Tuneable White Offers Continuous Variable Color From 2000k to

7000k - All Over 90CRI

Fixed White

Fixed White Offers a Static CCT 2000k to 7000k - All Over 90CRI

03

SPECIFICATIONS

Black Tank is an LED tech company focused on specification and theatrical grade product development. In partnership with Rosco Labs, we released the Cube Family which have been used around the world in Museums to light priceless art, critical theatrical environments such as Cirque De Soleil and on Broadway, and to replace traditional fixtures in dynamic architectural installations.

The OrigamX Light Engine is the culmination of all of our experience, 18 months of R&D along with feedback from industry leading LDs, architects and engineers.

DESIGNED BY THE BLACK TANK

Input Voltage:

Power Consumption:

Power Input:

LED:

Lumen Maintenance:

Data:

Color Range:

Operation:

Operating Temp.:

Humidity:

Weight:

Approvals:

12-24VDC

16W (DC Input) at 100% Output

CAT5 (Power +Data)

RGBA / Dynamic White / Fixed White

80,000 Hours B50 L70 at 45C (LM-79-08 Standard)

RJ45 Connector

4.2 Billion discrete mixes (256 x 256 x 256 x 256)

DMX: 8 or 16 bit DMX512

-13° to 113° F (-20° to 45° C)

0 - 95% Non-condensing

8 Oz (0.23 kg)

FCC Class B Radiated and Conducted

ETL / UL Standards 2108

cETL / CSA C22.2 No. 250.0

UL8750 and CSA 250.13

CE / IP20 Rated

Photometric Data Available Online

MOUNTING OPTIONS

HOW IT WORKS

MOUNTING(Specifiable)

END CAP(Specifiable)

BODY(Specifiable)

LIGHT ENGINE(Specifiable)

OPTIC OPTIC HOLDER NOSE CONE(Specifiable)

Monopoint Knuckle DMX/RDM Track

StemPendant

The Medi-O fixture can be assembled with a variety of mounting options to enable the fixture’s versatiliy and aesthetics to match its surroundings. We can also work with OEMs to integrate the module in existing or new fixtures and/or support your custom designs.

origamx.com 04


DESIGNED BY THE BLACK TANK

DMX/RDM OveriewIn DMX mode, the unit is controlled by the data it receives on the RJ45 connector located on the rear of the fixture. The RJ45 also serves as a power input. The number of DMX channels required to control the fixture is dependent on the factory setting in use (for example - four color OrigamX Fixtures use four DMX Channels while one color OrigamX Fixtures use one).

RDM (Remote Device Management)OrigamX Fixtures have RDM (Remote Device Management) functionality. RDM allows bidirectional control and communication over the CAT5 cable. See the next page for RDM Command List.

8 or 16 bit modeThe fixture can run in either 8 bit or 16 bit DMX Mode. In 8 bit mode, the OrigamX module accepts one DMX channel for each color. In 16 bit mode, two channels are required for each color. The first channel is the coarse setting and the second channel is the fine setting. For the DMX channel layout see the next page.

Filament FadeAn incandescent lamp has a slight delay, or lag with changing intensities, whereas an LED responds instantly. The difference is most noticeable during a theatrical black out. The OrigamX Module can emulate an incandescent lamp by selecting one of the Filament Fade settings.

PWM FrequencyOrigamX Modules can be set to operate at 4kHz or 16kHz using RDM.

origamx.com 05

DMX/RDM Mode


Personality 1 (8 Bit) Personality 2 (16 Bit Legacy)

Personality 3 (8 Bit + Mstr)

Personality 5 (8 Bit + Sktz)

Personality 4 (CCT Mode)

RGBA/W

1 - Red2 - Green3 - Blue4 - Amber/White5 - Zoom (If Available)

IF SKITZO IS BELOW 50%

1 - Red2 - Green3 - Blue4 - Amber/White5 - Master Dimmer6 - Zoom (If Available) 7 - Skitzo

IF SKITZO IS ABOVE 50%

1 - Color Temp2 - N/A3 - N/A4 - N/A5 - Intensity6 - Zoom (If Available) 7 - Skitzo

RGBA/W

1 - Red Coarse2 - Red Fine3 - Green Coarse4 - Green Fine

1 - Red2 - Green3 - Blue4 - Amber/White5 - Master Dimmer6 - Zoom (If Available)

1 - Color Temp2 - Intensity3 - Zoom (If Available)

5 - Blue Coarse6 - Blue Fine7 - Amber/White Coarse8 - Amber/White Fine

DMX Channel Layout

RDM Command List

G = GET S = SET

• DISC_UNIQUE_BRANCE• DISC_MUTE• DISC_UN_MUTE• STATUS_MESSAGES G• STATUS_ID_DESCRIPTION G• SUPPORTED_PARAMETERS G• DEVICE_INFO G • DEVICE_MODEL_DESCRIPTION G• MANUFACTURER_LABEL G • DEVICE_LABEL G/S• SOFTWARE_VERSION_LABEL G• DMX_PERSONALITY G/S• DMX_PERSONALITY_DESCRIPTION G

• DMX_START_ADDRESS G/S• SENSOR_DEFINITION G• SENSOR_VALUE G• CURVE G/S• CURVE DESCRIPTION G• OUTPUT_RESPONSE_TIME G/S• OUTPUT_RESPONSE_TIME_DESCRIPT G• MODULATION_FREQUENCY G/S• MODULATION_FREQUENCY_DESCRIPT G• DEVICE_HOURS G• DEVICE_POWER_CYCLES G• IDENTIFY_DEVICE G/S• RESET_DEVICE S

origamx.com 06


1 2000K6 2100K11 2200K16 2300K21 2400K26 2500K31 2600K36 2700K41 2800K46 2900K51 3000K56 3100K61 3200K66 3300K71 3400K76 3500K81 3600K



DMXValue

ColorTemp.

DMXValue

ColorTemp.

DMXValue

ColorTemp.

There are 50 recipes from 2000K to 7000K. The Color temperature will increment 100° every 5 DMX steps. See Below:

4CA CCT Mode DMX Values

origamx.com 07


OrigamX Hub

To connect OrigamX Fixtures to the Hub, simply plug the Hub into AC power and then connect it to a DMX control source using a 5-pin DMX cable. From there, connect up to 12 Fixtures to the output ports on the Hub using standard CAT5e Ethernet cables.

Track Mounted

To connect OrigamX Fixtures to a track simply insert the track head with connected fixture into to low voltage track. The low voltage track can be supplied by a 12-24VDC Class 2 power supply or by utilizing the Auxiliary port on the back of the Hub.

DMX Controller

AC In

24 VDCAuxiliary

Output

Up to 12 OrigamX Modules on one Hub using Cat5e cableMax Cable Run is 240’/73m

Junction Box Optional

12-24VDC Class 2

DMX Controller

origamx.com 08


Stand Alone

Stand alone mode is simply a power only option, where no data is supplied to the fixture. With this configuration you will need to have the light reconfigured with custom modes which can be setup at the time of order. These modes include Preset, Colorwash and Fixed Color.

Cat5e Pinout Chart

12-24VDC Class 2

Channel

Data+Data-

Power-Power+Power-Power+

Data ComSerial In

Color Pair

White/OrangeOrange

White/GreenGreen

White/BlueBlue

White/BrownBrown

RJ-45 Pins

12365478

1 2 3 4 5 6 7 8

PIN 1

origamx.com 09


FCC WarningThis equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

WarrantyThe Black Tank warrants that, under normal use in accordance with the applicable user manual, the Product shall, at the time of delivery to Buyer and for a period of sixty (60) months from the date of delivery (or such other period as may be agreed upon in writing by the parties), be free from defects in material or workmanship and shall substantially conform to The Black Tank’ specifications for such Product, or such other specifications as The Black Tank has agreed to in writing, as applicable. The non-conforming or defective Product shall become The Black Tank' property as soon as they have been replaced or credited.

General Precautions1. Before use, make sure all safety points are secured.

2. There are no servicable parts on the fixture.

3. ALWAYS adhere to safety instructions and warnings, including any and all instructions set forth in the Product Specifications.

4. To allow for proper cooling, airflow must not be restricted through the front and rear of the fixture - do not block off the front or rear panel.

5. For Dry locations/Indoor use only.

origamx.com 10


EX

AM

PLE

OGMX

Example Part Number OGMX-RGBA-TK-BLK-ZOOM-ZM-BLK-BLK-F-BLK

LED Type

Optic Style

Enclosure Finish

Nose Cone Style

Nose Cone Finish

End Cap Style

End Cap Finish

Mounting Style

Mounting Finish

RGBA - Red, Green, Blue & AmberTW - Tuneable White (2000-7000K)FIX - Fixed CCT White - Specify Below

NAR - Narrow (8 Degree)ZOOM - ZOOM Variable Beam Option (8 -60 Degrees)

Nose Cone

Enclosure

End Cap

Mounting

BLK - Black Powder CoatWHT - White Powder CoatSLV - Silver AnodizedCUS - Custom*

SS - Small StraightLS - Large StraightFL - FlaredZM - ZOOM (If ZOOM option is picked under Optic Style)

F - FlatR - Rounded

BLK - Black Powder CoatWHT - White Powder Coat

If you chose Fixed CCT or Custom Finishes please fill out the boxes below. Fixed CCT color temperatures are available in 100° Kelvin increments between 2000K and 7000K.


TK - Track KnuckleMK - Monopoint KnuckleMP - Monopoint PendantMS - Monopoint Stem


- - - - - - - - -

Project Name:

Specifier:

Quantity:

Contact Info:

Additional Notes:

Fixed CCT Color

Nose Cone Color

Enclosure Color

End Cap Color

origamx.com 11

Fixture Ordering SheetMEDI-O

4.33

2.20

7.12

6.65

4.50

PART NUMBEROGMX-XXX-TK-XXX-NAR-BS-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-TK-XXX-ZOOM-ZM-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-TK-XXX-ZOOM-ZM-XXX-XXX-R-XXX

PART NUMBEROGMX-XXX-TK-XXX-NAR-BS-XXX-XXX-R-XXX

4.50

2.60

4.47

2.206.79

7.26

4.50

4.97

7.297.

76

2.20

2.60

4.50

2.20

4.82

7.157.

62

Track Knuckle Mounting

origamx.com 12

MEDI-O

PART NUMBEROGMX-XXX-TK-XXX-NAR-FL-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-TK-XXX-NAR-SS-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-TK-XXX-NAR-SS-XXX-XXX-R-XXX

PART NUMBEROGMX-XXX-TK-XXX-NAR-FL-XXX-XXX-R-XXX

2.20

4.33

6.657.

12

2.01

2.204.

33

6.657.

12

2.01

4.504.50

2.20

2.01

4.82

7.157.

62

4.50

2.20

2.01

4.82

7.157.

62

4.50

Track Knuckle Mounting

origamx.com 13

MEDI-O

PART NUMBEROGMX-XXX-MK-XXX-NAR-BS-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MK-XXX-ZOOM-ZM-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MK-XXX-ZOOM-ZM-XXX-XXX-R-XXX

PART NUMBEROGMX-XXX-MK-XXX-NAR-BS-XXX-XXX-R-XXX

2.20

4.33

6.086.

71

5.00

4.47

6.22

6.85

5.00

2.60

2.20

4.97

6.72

7.35

5.00

2.60

2.20

4.82

6.58

7.21

5.00

2.20

origamx.com 14

Monopoint Knuckle MountingMEDI-O

PART NUMBEROGMX-XXX-MK-XXX-NAR-FL-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MK-XXX-NAR-SS-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MK-XXX-NAR-SS-XXX-XXX-R-XXX

PART NUMBEROGMX-XXX-MK-XXX-NAR-FL-XXX-XXX-R-XXX

4.33

6.08

6.71

5.00

2.20

2.01

4.33

6.08

6.71

5.00

2.20

2.01

4.82

6.58

7.21

5.00

2.20

2.01

4.82

6.58

7.21

5.00

2.20

2.01

origamx.com 15

Monopoint Knuckle MountingMEDI-O

PART NUMBEROGMX-XXX-MP-XXX-NAR-BS-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MP-XXX-ZOOM-ZM-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MP-XXX-ZOOM-ZM-XXX-XXX-R-XXX

PART NUMBEROGMX-XXX-MP-XXX-NAR-BS-XXX-XXX-R-XXX

2.20

4.33

5.00

0.63

5.00

0.63

2.60

2.20

4.47

5.00

2.60

2.20

0.63

4.97

5.00

0.63

4.82

2.20

origamx.com 16

Pendant MountingMEDI-O

PART NUMBEROGMX-XXX-MP-XXX-NAR-FL-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MP-XXX-NAR-SS-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MP-XXX-NAR-SS-XXX-XXX-R-XXX

PART NUMBEROGMX-XXX-MP-XXX-NAR-FL-XXX-XXX-R-XXX

5.00

0.63

2.20

2.01

4.33

5.00

0.63

2.20

2.01

4.33

5.00

0.63

2.20

2.01

4.82

5.00

0.63

2.20

2.01

4.82

origamx.com 17

Pendant MountingMEDI-O

PART NUMBEROGMX-XXX-MS-XXX-NAR-BS-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MS-XXX-ZOOM-ZM-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MS-XXX-ZOOM-ZM-XXX-XXX-R-XXX

PART NUMBEROGMX-XXX-MS-XXX-NAR-BS-XXX-XXX-R-XXX

5.00

0.63

2.20

4.33

5.00

0.63

2.604.

47

2.20

5.00

0.63

2.60

4.97

2.20

5.00

0.63

2.20

4.82

origamx.com 18

Stem MountingMEDI-O

PART NUMBEROGMX-XXX-MS-XXX-NAR-FL-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MS-XXX-NAR-SS-XXX-XXX-F-XXX

PART NUMBEROGMX-XXX-MS-XXX-NAR-SS-XXX-XXX-R-XXX

PART NUMBEROGMX-XXX-MS-XXX-NAR-FL-XXX-XXX-R-XXX

5.00

0.63

2.20

4.33

2.01

5.00

0.63

2.204.

33

2.01

5.00

0.63

2.20

4.82

2.01

5.00

0.63

2.20

4.82

2.01

origamx.com 19

Stem MountingMEDI-O

origamx.com

Date post:	26-Jul-2021
Category:	Documents
Upload:	others
View:	7 times
Download:	0 times

OrigamX Medi-O 2021 · 2021. 2. 10. · origamx.com KEY FEATURES Protected by US and International...

Documents