1
By following a few simple cleaning ps, your sprinkler should provide years of reliable service. • Clean the water inlet filter by removing it and rinsing. • Use the provided cleaning pin to clear any clogged spray nozzles. Then run water through with cleaning pin removed to flush the system. Width Control The Oscillang Sprinkler is easily adjusted to suit any rectangular watering area. Range Control Slide the tabs as required to adjust the oscillaon range. Flow Control Turn the Flow Control dial to increase or decrease water flow through the sprinkler. For more informaon visit www.hoselink.com.au or call 1300 900 617 Product guide Oscillating Sprinkler Item: 5642 Kit contents 1x Oscillang Sprinkler 1x Hoselink Accessory Connector Components Assembly Guide Maintenance Tips Using the Oscillating Sprinkler Cleaning Tips Step 1 Screw the Hoselink Accessory Connector into the sprinkler. Step 2 Connect to a water supply by aaching your Hoselink-fied hose end to the Accessory Connector on the sprinkler. • If sprinkler does not operate properly, remove the Cleaning Pin from the end and flush water through. • Drain the sprinkler aſter use. • Do not allow water to freeze in the sprinkler. • Store out of direct sunlight. Press to turn on/off Slide tabs to adjust range Turn to adjust water flow Up to 12m Up to 15m Up to 12m Up to 15m
