Date post: | 06-Aug-2015 |
Category: |
Documents |
Upload: | fredrique-peregrino |
View: | 106 times |
Download: | 3 times |
Osborne Training ServicesPart of the OEL group of companies
Technical and Management Training Solutions
OEL Group
22
3
Osborne Engineering Limited has been facilitating successful training
programmes for over fifteen years and are fully committed to delivering quality
training. Our dedicated training division, Osborne Training Services (OTS) is
able to draw from a wide range of instructional expertise to supply high quality
theoretical and practical training.
We believe that in order for organisations to evolve
successfully then the continued development
of their staff is essential. In this ever-changing
environment it is the ability of the individuals within
the organisations to learn and develop their skills
that will determine their on going success. For
the learning to be as effective as possible it must
meet with the business objectives of the individual
organisation.
All OTS Courses can be modified to suit individual
customer requirements. OTS can offer a complete
training service firstly communicating with the
customer to establish their needs and then develop
and deliver the course in partnership with customer
requirements. OTS believe in a continuous
improvement process for all of our courses.
Students can evaluate their course on completion
and offer us feedback in all areas. We use this
information to ensure that our standards of
instruction, equipment and presentation are always
ahead of the competition. All our courses are backed
up with high quality training manuals and materials.
Our instructional capability includes experts in
the fields of Gas Turbine Engineering, Machine
Tribology/ Failure Analysis, Rotating Equipment,
Vibration, Alignment, Control and Instrumentation,
Electrical Systems, Management Training and Health
and Safety. All of our highly qualified instructors
have considerable practical experience in the field in
which they teach.
Introduction
3
4
OTS have dedicated facilities in Newcastle, Aberdeen, Poland, Dubai, Abu Dhabi
and more recently in Houston, Texas. Our training programmes have been
developed to include a high degree of practical training, and therefore these
centres have been equipped with a wide variety of practical equipment to
facilitate our core training in:
• PowerGeneration• Mechanical• InstrumentationandControls• Electrical• Management• HealthandSafety
Our Dubai facility also benefits from close proximity
to a major turbine refurbishment workshop to allow
further hands on training and to allow students
to gain more practical experience in Gas Turbine
Maintenance and repair.
Due to the locations of our training centres and
our transportable training equipment we are
able to offer high quality training services to the
UK, Europe, Asia, Africa and the Middle East.
We also have the ability to conduct our courses at
the customers own facilities should this be more
convenient.
Technical Training Solutions
5
Osborne Training Services provide Open Registration
courses to allow customers to register individual
or small groups of students on one of our training
programmes. These courses are conducted at
our Training Centres in Dubai and the UK and are
designed specifically to meet the requirements of
the Power generation, Oil, Petrochemical and other
industries in today’s market place.
During these Open Registration courses delegates
are actively encouraged to interact with each other
and encouraged to discuss individual circumstances,
allowing the tutor to meet not only the needs of
the group as a whole but to address individual
requirements. For this reason we limit the
number of attendees on each training course.
Open Registration Programme
Through our substantial experience in the
development and delivery of training courses
Osborne Training Services has the necessary skill
and expertise to design and deliver a wide variety
of technical courses on a huge range of equipment
and systems. We therefore offer a service to our
customers to provide a training course on most
technical subjects or systems. This means that
OTS, using their vast course design experience, can
develop a programme to suit a particular system,
machine or application and provide the customer
with the ownership of any training material
produced.
Bespoke Courses
6
Power GenerationOTS conduct a wide variety of Power Plant Operations and Maintenance courses
focusing mainly on the GE product range but also cover Ruston, Avon and
Solar machines. Our training centres are equipped with a wide variety of Gas
Turbine Components such that such that students can discuss the maintenance
requirements of each part and appropriate inspection techniques.
To provide targeted operator courses we use a range of simulators, including Speedtronic Control System Simulators, such that we can tailor courses to suit individual customer requirements. The use of simulators provides an ideal environment for operators to use interactive systems such that they can familiarise themselves with standard Plant Operations.
• BoilerandSteamGenerationSystems• CityandGuilds4WeekPowerGeneration
Operations and Engineering• CombinedCycleGasTurbinePerformance• CombinedCyclePowerPlant• DieselEngine• DieselGenerator• EX2000ExcitationSystem• GasTurbineDevelopeeProgramme• GasTurbineMechanicalMaintenace• GasTurbineOperationwithSentinelorLA-RR
1Control system• GasTurbineOperations(Generic)
• GasTurbineOperationsManagement• GasTurbineOperationswithMKIISpeedtronic
Control System• GasTurbineOperationswithMKIVSpeedtronic
Control System• GasTurbineOperationswithMKVSpeedtronic
Control System• GasTurbineOperationswithMKVISpeedtronic
Control System• GasTurbineTechnology• GeneratorControlandProtection• IntroductiontoCombinedCyclePowerPlant• IntroductiontoGasTurbines• LM6000DLEPDSprintCourse• MKIISpeedtronicControlSystemMaintenance• MKIVSpeedtronicControlSystemMaintenance• MKVSpeedtronicControlSystemMaintenance• MKVISpeedtronicControlSystemMaintenance• SentinelorLA-RR1ControlSystemMaintenance• SpeedtronicConsultancy• SteamTurbineOperationsandMaintenance• WaterTreatment/BoilerWaterAnalysis
City & Guilds - 4 Week Power Generation Operations and Engineering
7
This course has been developed in conjunction with Newcastle College and by doing so it has attracted City and Guilds accreditation. The aim of this course is to provide engineers/technician, and new entrants to the Power Generation/Oil & Gas sectors, the core skills to enable them to make an immediate impact within these essential industries. Our course will equip students with the necessary technical knowledge and competence such that on completion they will have a clear understanding of the methods of Power Generation and possess key skills that can be used within this field. During the course the delivery of knowledge and theory will be backed up with sound practical skills ensuring a solid understanding of all the information gained.
This course has been designed to ensure that students gain the maximum knowledge and that this will increase their effectiveness and understanding for their current, or any prospective future, employer. During the course students will become familiar with a wide and diverse range of equipment across the array of trades and disciplines within this sector.
Throughout the course a focus on health and safety in the workplace will be emphasised to ensure that students adopt the same safe practice within industry employment as they do on the course. In addition to this the student will be able to identify the roles and responsibilities of the personnel
operating within a Power Plant, demonstrate an understanding of the design and operation of a Power Plant and competently undertake diagnostic checks and fault diagnosis.
Students will benefit from a continuous assessment methodology whilst also producing a portfolio of work. This portfolio will be marked and graded by City and Guilds in conjunction with tutors from Newcastle College. This ensures that students gain a highly regarded and credible qualification at the end of the course from a respected training provider. This balance of academic and industrial training will ensure that the delegates can work effectively in a wide variety of roles within this continually expanding industry.
Students are encouraged to contact OTS at any time post course to seek assistance with any further training, support or aid in developing additional skills that may be applicable to the Oil, Gas and Power Generation Industry.
The course includes;• PowerPlantHealthandSafety• IntroductiontoPowerGeneration• MechanicalTraining• Instrumentation,OperationsandControl• ElectricalTraining• Performance/BalanceofPlant
8
Mechanical Training course provision can be divided into two separate categories.
The first category is Mechanical Equipment Maintenance and in this area OTS
canofferavarietyofPumpandCompressorcourses.Bothourcentresprovide
practical equipment for facilitating this type of training, including Pump/Motor
skids and Compressors.
The second category of mechanical courses are those
in specialised areas of mechanical maintenance and
engineering. OTS can offer Alignment training and
teach a variety of alignment techniques including
Laser Alignment (Prüftechnik Optalign Plus). Further
we provide vibration analysis courses that include
vibration measurement, diagnosis techniques and
the principles of balancing rotating shafts.
Another specialised area is that of Tribology and in
this subject we can provide a variety of individual
trainingprogrammesincludingBearingsandBearing
Failure Analysis, Mechanical Seals and Gears.
• AdvancedDesign,OperationandMechanicalAspect of Centrifugal Gas Compressors
• AdvancedReliabilityCenteredMaintenance• Bearings&BearingFailureAnalysis• CentrifugalandReciprocatingCompressors• DieselEngines• Design,Construction,Control&Operationof
Reciprocating Compressors• MachineryFailureAnalysis• MechanicalSealsMaintenance• PumpOperationsandMaintenance• ReverseandLaserAlignment• Tribology/faultfindinganalysisofmachines• VibrationAnalysisandPredictiveMaintenance• VibrationMeasurementandAnalysis
Mechanical Training Courses
Our Instrumentation and Control Courses cover a wide portfolio of available
subject matters. A particular area of expertise is Programmable Logic Controllers
(PLC’s) and to facilitate training in this subject OTS have invested in a range of PLC
modules(AllenBradley)thatcanbeusedtoprovidetrainingonthelatest
programming techniques and interface types (SCADA systems).
We also can provide training on a variety of the
latest Field Instrumentation including pressure,
temperature, flow and level measurement
instruments. Calibration and Maintenance
techniques can also be taught in our fully
equippedinstrumentation labs.
• SpeedtronicControlSystemMaintenance• SpeedtronicControlSystemOperations• SentinelControlSystemMaintenance• SentinelControlSystemOperations• ConditionMonitoringandVibrationControlof
Machines and Plant• DistributedControlSystems• IndustrialInstrumentationControl(PLC)• IndustrialProcessInstrumentation• InstrumentationforOperators• SmartTransmittersandSingleLoopControllers• TypesofControl• UPSSystemandPowerConditioners• Valves
Instrumentation & Control Courses
9
10
The generation and distribution of electricity is fundamental to everyday life
throughout the world.
OTS has developed a range of Electrical Training
Courses covering the subjects as detailed below.
Most of the practical training in this area is
conducted using simulators.
• AdvancedHighVoltageElectricalProtectionincluding 33Kv (In conjunction with the Faraday centre)
• AdvancedLowVoltageElectricalTroubleshootingfor Technicians
• ElectricalEquipmentTroubleshootingandMaintenance
• FaultFindingonElectricalPowerSystems• FaultFindingOnElectricalPowerSystems
Our Electrical Feedback training includes a versatile
range of equipment including;
• d.c.machines• a.c.machines(singleandthreephase)• Dissectiblemachines• SingleandThreephasetransformers• Measurementandcontrol• Powerelectronics• ConventionalandVirtual(PCbased)
Instrumentation• Renewableenergy–Photovoltaics
This versatile range of equipment enables students to gain a “hands on” understanding of the how and why as to the use of different types of motors and generators in various applications.
Conventional instrumentation is important in many applications but the applications of PC based instrumentation enhances the learning process and enables students to see, make calculations and plot characteristics effectively and efficiently.
Electrical Training Courses
OTS believe that strong supervisory and management skill are essential for the
progression of individuals within an organisation and properly trained staff can
add valuable growth potential for the organisation itself.
The programmes that we offer below provide
a range of skills development that can equip
supervisors and managers at all levels with the
necessary expertise in a variety of management
processes and efficient maintenance
management techniques.
• AdvancedNegotiation• BusinessandTechnicalReportWriting• EffectiveLeadershipTechniques• EffectiveSupervisorySkills• GasTurbineMaintenanceManagement• InterpersonalSkillsandCommunication(Oral,
Written and Visual)• ILMLevel3awardinLeadershipandManagement• MaintenanceManagementandPlanning• MaintenancePlanningandScheduling• ManagementPlanningandSchedulingOutages
Using Microsoft Project• ManagementwithITIntegrationCourse• ProjectManagementincludinguseofMicrosoft
Project• ProjectPlanning,Reporting,Monitoringand
Control• RootCauseFailureAnalysis• StrategicLeadershipandManagement• TeamBuildingCourse• TraintheTrainer• TroubleshootinginOilRefineries
Management Training
11
12
OTS is now accredited to the Institute of Leadership and Management (ILM) for
the delivery of the ILM Level Three Award in Leadership and Management. The
ILM Level 3 is a first line management course which gives an introduction to the
basic skills, knowledge, and understanding required by today’s first line manager.
The course is designed for first line managers
looking to develop a wide range of management
and leadership skills suitable for their role. The
qualification also develops both understanding and
application of leadership skills through the use of
action learning.
The course is designed to develop knowledge and
understanding of leadership as required by team
leaders and practising or potential first line manager.
The course can be run as a five day intensive package
or as five individual days over a period of time. An
outline course covering the following subjects is the
suggested course but any of the units listed in the
ILM course specification can be combined to suite a
company’s requirements, details on request.
Suggested course profile• Understandinghealthandsafetyintheworkplace
(M3.23-2credits)• Leadingandmotivatingateameffectively(M3.36-
2credits)• Understandingconflictmanagementinthe
workplace(M3.14-1credits)• Solvingproblemsmakingdecisions(M3.01-2
credits)
ILM Level 3 Award in Leadership and Management
13
Our unique quality assured health and safety programmes together with our expertise will assist organisations in gaining nationally recognised qualifications,suchasIOSHandNEBOSH.Inaddition, Individuals will gain an understanding of how to apply the knowledge gained in their own work environment.
Accredited Health and Safety Training• IOSHWorkingSafely• IOSHSafetyforSeniorExecutives• IOSHManagingSafely• IOSHManagingEnvironmentalResponsibilities• NEBOSHNationalGeneralCertificatein
Occupational Health and Safety• NEBOSHInternationalGeneralCertificatein
Occupational Health and Safety• NEBOSHNationalCertificateinConstruction
Health and Safety• NEBOSHNationalCertificateinFireSafetyand
Risk Management• NEBOSHInternationalTechnicalCertificateinOil
and Gas Operational Safety• NEBOSHNationalDiplomainOccupational
Health and Safety
BespokeHealthandSafetyTraining• AccidentInvestigation• AsbestosAwareness• COSHHAssessment• FireRiskAssessment• GeneralRiskAssessment• LegionellaManagement• ManualHandlingAssessment• ManualHandlingTraintheTrainer• PermittoWork• StressAwareness• WorkingatHeight
Health & Safety Training Courses
14
At OTS we work with other professional companies and organisations to ensure
our clients receive the best service possible.
They include:•NorthumbriaUniversity• TheFaradayCentre• TeessideUniversity• NewcastleCollege• CityandGuilds• InstituteofLeadershipandManagement(ILM)• ScantimeEngineering• AKEGroupLtd• PowerDevelopmentsInternational• Quartzelec• Prüftechnik-Wibrem• OEL-Wibrem• FalckNutec• TurbineServicesLtd• AAFLtd
In addition we deliver training to a wide variety of industry leading companies and organisationsThey include:• Merck,SharpandDohme• Heineken• Husqvarna• ExxonMobil• Apache• Hyundai• AlstomPower• Centrica• Mitsubishi• SITA• UniversityofSunderland• GreenstreamPV• MellitahOilandGas• ADNOCGroup• SaudiElectricCompany• SONGAS• BordGaisEnergy• GEPIIPipelineSolutions• GGIEnergyControls
Associated Companies
15
Osborne Turbine ComponentsUnit 19 Atley WayNorth Nelson Industrial EstateCramlingtonNorthumberlandEnglandNE231LLT+44(0)1670737077F+44(0)1670736127E [email protected] www.osborneturbinecomponents.com
Head OfficeUnit 19 Atley WayNorth Nelson Industrial EstateCramlingtonNorthumberlandEnglandNE231LLT+44(0)1670737077F+44(0)1670736127E [email protected] www.oel-apixconsulting.com
OsborneBearingTechnologyUnit 19 Atley WayNorth Nelson Industrial EstateCramlingtonNorthumberlandEnglandNE231LLT+44(0)1670737077F+44(0)1670736127E [email protected] www.osbornebearingtechnology.com
OEL Apix ConsultingUnit 19 Atley WayNorth Nelson Industrial EstateCramlingtonNorthumberlandEnglandNE231LLT+44(0)1670737077F+44(0)1670736127E [email protected] www.oel-apixconsulting.com
Osborne Training ServicesUnit 19 Atley WayNorth Nelson Industrial EstateCramlingtonNorthumberlandEnglandNE231LLT+44(0)1670737077F+44(0)1670736127E [email protected] www.osbornetrainingservices.com
OsborneEngineeringSp.z.o.o.Ul.Piekna6650-506WroclawPoland
T+48(0)71/7963235F+48(0)71/7963177E [email protected] W www.osborne-engineering.com.pl
Turbo Power ServicesUnit 9 Ash CourtWalkerRoad,BardonHillCoalvilleLeicestershireEnglandLE671UDT+44(0)1530835335F+44(0)1530835115E [email protected] www.turbopowerservices.com
Osborne Training Services - DubaiOilfield Supply CentreUnit38POBOX30703Jebel AliDubaiUnited Arab EmiratesT+971(4)8833310F+971(4)8833538E [email protected] www.osbornetrainingservices.com
Osborne Engineering LLCOilfield Supply CentreUnit38POBOX30703Jebel AliDubaiUnited Arab EmiratesT+971(4)8833310F+971(4)8833538E [email protected] www.osborne-engineering.com.ae
OEL GroupUnit 19 Atley WayNorth Nelson Industrial EstateCramlingtonNorthumberlandEnglandNE231LLT+44(0)1670737077F+44(0)1670736127E [email protected] www.oel-group.com
OEL Group of
companies
OELGroup–AberdeenUnit 3 Robert LeonardHowemoss DriveIndustrial CentreKirkhill Ind. Est.DyceAberdeenAB210GG
OELGroup–Houston877TallyhoRoadBLG3HoustonTexasUSA
Osborne Engineering LLCOldMasaoodBuilding,302NajdaStreet,Abu DhabiUAEPOBox33906
OEL Group