OUR COMPANY
Montajes Misonco Cantábrico SL, is a Company founded in 2006 whose
main activity is offering high quality services in welding and industrial
assembly.
We provide a comprehensive high quality service to industry all over the
world and our longstanding experience has positioned us as a leading
Company in our sector. We are highly capable of handling big projects in
time bound manner and we perform work to the highest quality standards.
We carry out this methodology in new projects or in the reparations or
revamping that we have been carried out abroad.
PROCEDURE
Misonco Cantábrico Assembly Company´s
manufacturing process are based on the use of
approved welding procedures through different
manual welding methods (MIG, TIG, SMAW,..).
We also carry out robotic TIG-Orbital welding.
The materials commonly used are:
Carbon Steel
Stainless steel
Hastelloy
Cr Mo Alloys
Nickel alloys
Duplex
Superduplex
Aluminium
XTM....
WORKS
Welding & Assembly Division
Header outputs and caps (Spain) - A335
P22
Prefabrication for CEASA (Spain) -
Stainless Steel 321H
Header, weld o lets, reduction and
connections for Delfin Tubes (Spain)-
Stainless Steel 321H
Header detail with 28 outputs for Delfin
Tubes (Spain)- Alloy Steel (ASTM A335
Gr. P22)
1 2
3
4
WORKS
Welding & Assembly Division
Heat exchanger detail for Mefasa (Spain)
- Stainless Steel 304H
Pipelines for heater connection - 6"
Stainless Steel 304H
Jump overs and pipes for Delfin Tubes
(Spain) - 3 ½" A335 P22
Pipes for convection section for Delfin
Tubes (Spain) - 6" A355 Gr.9
1 2
3
4
WORKS
Gas Division
Gas pressure control and measurement
station G-250 (GPCM)
Welding on load (waytee) 10 '' 80 [bar]
Manufacture and Assembly of field valves
with scrapers ramp
Manufacture and Assembly a field valves.
1 2
3
4
REPARATIONS & REVAMPS
Bazan Group, Israel
Reparation of a boiler convection section.
The works were:
Assembly supervision
Welding works:
Carbon Steel…
REPARATIONS & REVAMPS
Suez Steel Co., Egypt
Reparation of a boiler convection section.
The works were:
Disassembly supervision
Assembly supervision
Welding works:
XTM
REPARATIONS & REVAMPS
Q.A.F.A.C., Qatar
Reparation and revamping a boiler convection
section of Qatar Fuel Additives Company
Limited
The works were:
Disassembly supervision
Assembly supervision
Welding works:
P22
P91
Stainless Steel (AISI 310)
REPARATIONS & REVAMPS
Emirates Steel, U.A.E.
Heater reparation of a convection section in
the phase 3 of the Emirates Steel plant at
Abu Dhabi.
The works were:
Disassembly supervision
Assembly supervision
Welding works:
XTM
Stainless Steel (AISI 310)
Carbon Steel
REPARATIONS & REVAMPS
Emirates Steel, U.A.E.
Heater revamp of a convection section in the
phase 2 of the Emirates Steel plant at Abu
Dhabi.
The works were:
Assembly
Welding works:
XTM
Stainless Steel (AISI 321H)
Carbon Steel
REPARATIONS & REVAMPS
Suez Steel Co., Egypt
Reparation of pipes and sleeves, belonging to
the output radiant section at Suez Steel plant .
The works were:
Welding works:
XTM
FABRICATION & ASSEMBLY
Indemesa, Spain
Fabrication and assembly a boiler.
The works were:
Fabrication
Assembly
Welding works:
Alloy Steel (EN 16Mo3)
FABRICATION & ASSEMBLY
Delfin Tubes, Spain
Prefabrication and assembly a process gas/fuel heater for
Yama LNG Project.
The works were:
Fabrication in our facilities:
Pipework isometrics and radiant coils
Steelwork fabrication for GPCM
Welding works for the convection section
Assembly:
Final assembly of steelwork and pipework
Welding works:
Stainless Steel (316L)
Carbon Steel (A333 Gr.6)