6
Software Engineering Electronic Hardware Engineering Systems Engineering Airborne Software & Electronic Hardware Approvals/Certification (DARs) Program Management
MANNARINO is a world-class engineering services �rm specialized in the development, veri�ca-tion and validation of safety-critical systems, software and electronic hardware for the aerospace, defence, space, simulation and power generation industries. Founded in 1999, MANNARINO has contributed towards research and development projects for some of the world’s largest corpo-rations. Details on our offering can be found inside this brochure.
For further information, please refer to the contact information below:
MANNARINO Systems and Software Inc.
Our Industrial Regional Bene�ts Investor
Software Engineering
Electronic Hardware Engineering
Systems Engineering
Airborne Software & Electronic Hardware Approvals/Certi�cation (DARs)
Program Management
Health & usage monitoring systems (HUMS) Space Systems & Software Expert consulting Stall Warning Systems Gas turbine controls/FADEC RTCA/DO-178B/C Safety Analysis SAE ARP 4761 Avionics systems & software Automotive controllers Flight Management Systems Energy/Industrial gas turbine controls TCCA Design Approval Representatives Ground support equipment RTCA/DO-278/A Program & Project Management SAE ARP 4754 Flight controls Airborne Electronic Hardware RTCA/DO-254 Simulation Fuel Quantity Indication/Body Tank Controller Airborne embedded systems UAV systemsAerospace Certi�cation
MANNARINO has signi�cant experience in the aerospace certi�cation process per the following guidelines and aerospace recommended practices:
¦ RTCA/DO-178B/C ~ Software Considerations in Airborne Systems and Equipment Certi�cation
¦ RTCA/DO-254 ~Design Assurance Guidance for Airborne Electronic Hardware
¦ SAE ARP 4754A ~ Guidelines for Development of Civil Aircraft and Systems
¦ SAE ARP 4761 ~ Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment
¦ RTCA/DO-278/A ~ Guidelines for Communication, Navigation, Surveillance and Air Traf�c Management Systems Software Integrity Assurance
MANNARINO has led and participated in program audits with the following certi�cation authorities and/or associate delegates:
¦ Federal Aviation Administration (FAA)
¦ Transport Canada Civil Aviation (TCCA)
¦ European Aviation Safety Agency (EASA)
¦ Directorate of Technical Airworthiness and Engineering Support (DTAES-5)
MANNARINO Services
MANNARINO is highly specialized in the following areas:
1 - Airborne Embedded Software (RTCA/DO-178B/C)
¦ Avionics systems & software (Level A to D)
¦ Gas turbine Full Authority Digital Engine Controls (FADEC) systems & software
¦ Health & Usage Monitoring Systems (HUMS)
¦ Aerial refueling systems
¦ Ground Support Equipment (GSE) software
¦ Unmanned aircraft systems
2 - Airborne Software and Airborne Electronic Hardware Approvals/Certi�cation
¦ Airborne software (RTCA/DO-178B/C)
¦ Airborne electronic hardware (RTCA/DO-254)
3 - Industrial Gas Turbine Controls Software & Simulation ¦ Systems and software requirements development
¦ Software design
¦ Systems and software veri�cation/validation testing
4 - Training in the development of airborne software (RTCA/DO-178B/C)
¦ 3 day seminar on RTCA/DO-178B/C
¦ Optional 4th day focusing on RTCA/DO-178C Supplements & Tool Quali�cation
Business Development Tony Gentile (860) [email protected]
Airborne Software & Electronic Hardware Approvals/Certi�cation (DARs)
TRANSPORT CANADA CIVIL AVIATION (TCCA) DELEGATE SERVICES
To further complement our offering to our customers, MANNARINO provides Transport Canada Civil Aviation (TCCA) delegate services. TCCA Design Approval Representatives (DAR) are on staff for the following disciplines:
¦ Airborne software (RTCA/DO-178B/C)
¦ Airborne Electronic Hardware (AEH) (RTCA/DO-254)
www.mss.caSue Dabrowski (514) [email protected]
100 Alexis Nihon Boulevard, Suite 650, Saint-Laurent, Québec, Canada, H4M 2P2Tel: (514) 381-1360 • Fax: (514) 381-7511
Mannarinno_recto_final_mai2015D1.pdf 1 2015-05-01 14:00
MANNARINO at a Glance
MANNARINO provides:
¦ Safety-critical systems, software and electronic hardware engineering services to the aerospace, defense, space, simulation and power generation industries
¦ Transport Canada Civil Aviation (TCCA) Design Approval Representative (DAR) delegate services for airborne software (RTCA/DO-178B/C) and Airborne Electronic Hardware (AEH) (RTCA/DO-254)
¦ Training in the development of airborne software (RTCA/DO-178B/C)
Founded in 1999 by John Mannarino, MANNARINO is privately held, its success lying largely in the unique skill set of the senior management team and the expertise and professionalism of the engineering staff. MANNARINO is a lean, customer-focused service organization with an engineering staff of ~50 proudly serving 20+ customers.
Located in Montreal (Quebec) Canada, the third largest aerospace hub in the world, MANNARINO is well situated to address the needs of major OEMs and integrators locally, nationally and internationally, as Montreal is a gateway to Europe and the US markets.
Mannarino’s multilingual staff allows its expertise to bridge many cultures and provides breadth to its offering.
Software Engineering
The MANNARINO software engineering expertise covers a wide range of activities including:
COMPLETE SOFTWARE LIFE CYCLE SUPPORT for RTCA/DO-178B/C - Level A to D and RTCA/DO-278/A - Level 1 to 6, including:
¦ Planning, development, veri�cation
¦ Quality Assurance
¦ Con�guration Management
¦ Certi�cation Liaison
AIRBORNE EMBEDDED SOFTWARE
¦ Avionics Software (including IMA and Federated Systems)
¦ Engine Control System software
¦ Health & Usage Monitoring Systems (HUMS) software
¦ Ground Support Equipment (GSE) software design
SOFTWARE FUNCTIONALITY, DESIGN & DEVELOPMENT¦ Real-Time Operating System (RTOS) software design
¦ Low Level Drivers
¦ Application Software (AS) design & development
¦ Fault Management/BIT Functionality
¦ Scheduling & Software Partitioning
¦ Serial Buses (ARINC, UART, CAN, etc.)
¦ Software testing, veri�cation & validation
LANGUAGES, MICROPROCESSORS & PROTOCOLS¦ Languages, including hand-coding (Assembly, Ada, C/C++, Visual Basic)
¦ MPC555/745/5200B, ARM7, ARM9 and Cortex M3, Intel 8086 & 80186 microprocessors
¦ ARINC 429, CAN, CCP, I2C, SPI, RS232, RS422 protocols
INTEGRATED DEVELOPMENT ENVIRONMENTS¦ GreenHills, AdaMulti2000, CodeWarrior, RSLogix 5000, Allan Bradley Controller, Pilz
¦ IAR embedded workbench
TOOL EXPERIENCE¦ Model-based development tools (GPU, Beacon, SCADE, MatLab, Matrix X)
¦ Veri�cation tools [Open & Closed Loop Bench; Emulation/debugging probes
(iSystem, GreenHills, Lauterbach, Agilent, IAR); Logic Analyzer; Coverage Tools (RTRT, VectorCast, McCabeIQ)]
¦ Requirements Management tools (IBM Rational DOORS and DXL scripting)
¦ Polarion
Systems Engineering
The MANNARINO systems engineering expertise covers a wide range of activities including:
CERTIFICATION SUPPORT including:
¦ FAR/CAR/EASA engine & airframe certi�cation
¦ RTCA/DO-178B/C, RTCA/DO-278/A & RTCA/DO-254 support
¦ Liaison with certi�cation authorities
REQUIREMENTS MANAGEMENT
¦ System requirements de�nition, compliance analysis & validation
¦ Decomposition of systems to component requirements
¦ Experts in Requirements Management toolset (DOORS)
¦ Requirements Validation
¦ Hardware-in-the loop requirements testing
OTHER AREAS OF SYSTEMS ENGINEERING include:
¦ Control system con�guration
¦ ARP4754A Support
¦ Safety analysis per ARP 4761
¦ Control law design and operability/stability analysis
¦ Operability analysis
¦ Real time & non-real time system modeling/simulation
¦ Dynamic analysis
¦ System veri�cation/validation
¦ Engine & �ight test support
Program Management
Our Program Managers and Engineering Project Leaders are highly experienced engineers having signi�cant experience with various aerospace and defence companies. Program Managers ensure the MANNARINO teams are focused on all engineering deliverables and are keenly aware of schedule and cost. Regular program status updates are provided to our customers to ensure compliance with program costs and milestones. Depending on the program size, MANNARINO can produce the following industry standard Program Management deliverables:
PROGRAM MANAGEMENT PLAN¦ Work Breakdown Structure (WBS)
¦ Opportunities/risk registry
¦ Scope, schedule & cost estimates
¦ Budget baseline de�nition & updates
¦ Periodic program status reports that can include:
• Summary of activities, status, issues and opportunities/risks
• Cost/Budget status
• Work Package and Project Earned Value
• Cost Performance Index
• Schedule Performance Index
• Activity forecast
¦ Change proposal & approval process
Electronic Hardware Engineering
The MANNARINO engineering expertise covers a wide range of activities including:
¦ RTCA/DO-254 development, veri�cation and validation
¦ Complete hardware life cycle support for programmable devices (FPGA/PLD/ASIC)
¦ Veri�cation support for circuit card assembly compliance to RTCA/DO-254
“Our passion comes from years of commitment and dedication.”John Mannarino
Mannarinno_verso_final_mai2015D.pdf 1 2015-05-01 13:57
MANNARINO at a Glance
MANNARINO provides:
¦ Safety-critical systems, software and electronic hardware engineering services to the aerospace, defense, space, simulation and power generation industries
¦ Transport Canada Civil Aviation (TCCA) Design Approval Representative (DAR) delegate services for airborne software (RTCA/DO-178B/C) and Airborne Electronic Hardware (AEH) (RTCA/DO-254)
¦ Training in the development of airborne software (RTCA/DO-178B/C)
Founded in 1999 by John Mannarino, MANNARINO is privately held, its success lying largely in the unique skill set of the senior management team and the expertise and professionalism of the engineering staff. MANNARINO is a lean, customer-focused service organization with an engineering staff of ~50 proudly serving 20+ customers.
Located in Montreal (Quebec) Canada, the third largest aerospace hub in the world, MANNARINO is well situated to address the needs of major OEMs and integrators locally, nationally and internationally, as Montreal is a gateway to Europe and the US markets.
Mannarino’s multilingual staff allows its expertise to bridge many cultures and provides breadth to its offering.
Software Engineering
The MANNARINO software engineering expertise covers a wide range of activities including:
COMPLETE SOFTWARE LIFE CYCLE SUPPORT for RTCA/DO-178B/C - Level A to D and RTCA/DO-278/A - Level 1 to 6, including:
¦ Planning, development, veri�cation
¦ Quality Assurance
¦ Con�guration Management
¦ Certi�cation Liaison
AIRBORNE EMBEDDED SOFTWARE
¦ Avionics Software (including IMA and Federated Systems)
¦ Engine Control System software
¦ Health & Usage Monitoring Systems (HUMS) software
¦ Ground Support Equipment (GSE) software design
SOFTWARE FUNCTIONALITY, DESIGN & DEVELOPMENT¦ Real-Time Operating System (RTOS) software design
¦ Low Level Drivers
¦ Application Software (AS) design & development
¦ Fault Management/BIT Functionality
¦ Scheduling & Software Partitioning
¦ Serial Buses (ARINC, UART, CAN, etc.)
¦ Software testing, veri�cation & validation
LANGUAGES, MICROPROCESSORS & PROTOCOLS¦ Languages, including hand-coding (Assembly, Ada, C/C++, Visual Basic)
¦ MPC555/745/5200B, ARM7, ARM9 and Cortex M3, Intel 8086 & 80186 microprocessors
¦ ARINC 429, CAN, CCP, I2C, SPI, RS232, RS422 protocols
INTEGRATED DEVELOPMENT ENVIRONMENTS¦ GreenHills, AdaMulti2000, CodeWarrior, RSLogix 5000, Allan Bradley Controller, Pilz
¦ IAR embedded workbench
TOOL EXPERIENCE¦ Model-based development tools (GPU, Beacon, SCADE, MatLab, Matrix X)
¦ Veri�cation tools [Open & Closed Loop Bench; Emulation/debugging probes
(iSystem, GreenHills, Lauterbach, Agilent, IAR); Logic Analyzer; Coverage Tools (RTRT, VectorCast, McCabeIQ)]
¦ Requirements Management tools (IBM Rational DOORS and DXL scripting)
¦ Polarion
Systems Engineering
The MANNARINO systems engineering expertise covers a wide range of activities including:
CERTIFICATION SUPPORT including:
¦ FAR/CAR/EASA engine & airframe certi�cation
¦ RTCA/DO-178B/C, RTCA/DO-278/A & RTCA/DO-254 support
¦ Liaison with certi�cation authorities
REQUIREMENTS MANAGEMENT
¦ System requirements de�nition, compliance analysis & validation
¦ Decomposition of systems to component requirements
¦ Experts in Requirements Management toolset (DOORS)
¦ Requirements Validation
¦ Hardware-in-the loop requirements testing
OTHER AREAS OF SYSTEMS ENGINEERING include:
¦ Control system con�guration
¦ ARP4754A Support
¦ Safety analysis per ARP 4761
¦ Control law design and operability/stability analysis
¦ Operability analysis
¦ Real time & non-real time system modeling/simulation
¦ Dynamic analysis
¦ System veri�cation/validation
¦ Engine & �ight test support
Program Management
Our Program Managers and Engineering Project Leaders are highly experienced engineers having signi�cant experience with various aerospace and defence companies. Program Managers ensure the MANNARINO teams are focused on all engineering deliverables and are keenly aware of schedule and cost. Regular program status updates are provided to our customers to ensure compliance with program costs and milestones. Depending on the program size, MANNARINO can produce the following industry standard Program Management deliverables:
PROGRAM MANAGEMENT PLAN¦ Work Breakdown Structure (WBS)
¦ Opportunities/risk registry
¦ Scope, schedule & cost estimates
¦ Budget baseline de�nition & updates
¦ Periodic program status reports that can include:
• Summary of activities, status, issues and opportunities/risks
• Cost/Budget status
• Work Package and Project Earned Value
• Cost Performance Index
• Schedule Performance Index
• Activity forecast
¦ Change proposal & approval process
Electronic Hardware Engineering
The MANNARINO engineering expertise covers a wide range of activities including:
¦ RTCA/DO-254 development, veri�cation and validation
¦ Complete hardware life cycle support for programmable devices (FPGA/PLD/ASIC)
¦ Veri�cation support for circuit card assembly compliance to RTCA/DO-254
“Our passion comes from years of commitment and dedication.”John Mannarino
Mannarinno_verso_final_mai2015D.pdf 1 2015-05-01 13:57
MANNARINO at a Glance
MANNARINO provides:
¦ Safety-critical systems, software and electronic hardware engineering services to the aerospace, defense, space, simulation and power generation industries
¦ Transport Canada Civil Aviation (TCCA) Design Approval Representative (DAR) delegate services for airborne software (RTCA/DO-178B/C) and Airborne Electronic Hardware (AEH) (RTCA/DO-254)
¦ Training in the development of airborne software (RTCA/DO-178B/C)
Founded in 1999 by John Mannarino, MANNARINO is privately held, its success lying largely in the unique skill set of the senior management team and the expertise and professionalism of the engineering staff. MANNARINO is a lean, customer-focused service organization with an engineering staff of ~50 proudly serving 20+ customers.
Located in Montreal (Quebec) Canada, the third largest aerospace hub in the world, MANNARINO is well situated to address the needs of major OEMs and integrators locally, nationally and internationally, as Montreal is a gateway to Europe and the US markets.
Mannarino’s multilingual staff allows its expertise to bridge many cultures and provides breadth to its offering.
Software Engineering
The MANNARINO software engineering expertise covers a wide range of activities including:
COMPLETE SOFTWARE LIFE CYCLE SUPPORT for RTCA/DO-178B/C - Level A to D and RTCA/DO-278/A - Level 1 to 6, including:
¦ Planning, development, veri�cation
¦ Quality Assurance
¦ Con�guration Management
¦ Certi�cation Liaison
AIRBORNE EMBEDDED SOFTWARE
¦ Avionics Software (including IMA and Federated Systems)
¦ Engine Control System software
¦ Health & Usage Monitoring Systems (HUMS) software
¦ Ground Support Equipment (GSE) software design
SOFTWARE FUNCTIONALITY, DESIGN & DEVELOPMENT¦ Real-Time Operating System (RTOS) software design
¦ Low Level Drivers
¦ Application Software (AS) design & development
¦ Fault Management/BIT Functionality
¦ Scheduling & Software Partitioning
¦ Serial Buses (ARINC, UART, CAN, etc.)
¦ Software testing, veri�cation & validation
LANGUAGES, MICROPROCESSORS & PROTOCOLS¦ Languages, including hand-coding (Assembly, Ada, C/C++, Visual Basic)
¦ MPC555/745/5200B, ARM7, ARM9 and Cortex M3, Intel 8086 & 80186 microprocessors
¦ ARINC 429, CAN, CCP, I2C, SPI, RS232, RS422 protocols
INTEGRATED DEVELOPMENT ENVIRONMENTS¦ GreenHills, AdaMulti2000, CodeWarrior, RSLogix 5000, Allan Bradley Controller, Pilz
¦ IAR embedded workbench
TOOL EXPERIENCE¦ Model-based development tools (GPU, Beacon, SCADE, MatLab, Matrix X)
¦ Veri�cation tools [Open & Closed Loop Bench; Emulation/debugging probes
(iSystem, GreenHills, Lauterbach, Agilent, IAR); Logic Analyzer; Coverage Tools (RTRT, VectorCast, McCabeIQ)]
¦ Requirements Management tools (IBM Rational DOORS and DXL scripting)
¦ Polarion
Systems Engineering
The MANNARINO systems engineering expertise covers a wide range of activities including:
CERTIFICATION SUPPORT including:
¦ FAR/CAR/EASA engine & airframe certi�cation
¦ RTCA/DO-178B/C, RTCA/DO-278/A & RTCA/DO-254 support
¦ Liaison with certi�cation authorities
REQUIREMENTS MANAGEMENT
¦ System requirements de�nition, compliance analysis & validation
¦ Decomposition of systems to component requirements
¦ Experts in Requirements Management toolset (DOORS)
¦ Requirements Validation
¦ Hardware-in-the loop requirements testing
OTHER AREAS OF SYSTEMS ENGINEERING include:
¦ Control system con�guration
¦ ARP4754A Support
¦ Safety analysis per ARP 4761
¦ Control law design and operability/stability analysis
¦ Operability analysis
¦ Real time & non-real time system modeling/simulation
¦ Dynamic analysis
¦ System veri�cation/validation
¦ Engine & �ight test support
Program Management
Our Program Managers and Engineering Project Leaders are highly experienced engineers having signi�cant experience with various aerospace and defence companies. Program Managers ensure the MANNARINO teams are focused on all engineering deliverables and are keenly aware of schedule and cost. Regular program status updates are provided to our customers to ensure compliance with program costs and milestones. Depending on the program size, MANNARINO can produce the following industry standard Program Management deliverables:
PROGRAM MANAGEMENT PLAN¦ Work Breakdown Structure (WBS)
¦ Opportunities/risk registry
¦ Scope, schedule & cost estimates
¦ Budget baseline de�nition & updates
¦ Periodic program status reports that can include:
• Summary of activities, status, issues and opportunities/risks
• Cost/Budget status
• Work Package and Project Earned Value
• Cost Performance Index
• Schedule Performance Index
• Activity forecast
¦ Change proposal & approval process
Electronic Hardware Engineering
The MANNARINO engineering expertise covers a wide range of activities including:
¦ RTCA/DO-254 development, veri�cation and validation
¦ Complete hardware life cycle support for programmable devices (FPGA/PLD/ASIC)
¦ Veri�cation support for circuit card assembly compliance to RTCA/DO-254
“Our passion comes from years of commitment and dedication.”John Mannarino
Mannarinno_verso_final_mai2015D.pdf 1 2015-05-01 13:57
MANNARINO is a world-class engineering services �rm specialized in the development, veri�ca-tion and validation of safety-critical systems, software and electronic hardware for the aerospace, defence, space, simulation and power generation industries. Founded in 1999, MANNARINO has contributed towards research and development projects for some of the world’s largest corpo-rations. Details on our offering can be found inside this brochure.
For further information, please refer to the contact information below:
MANNARINO Systems and Software Inc.
Our Industrial Regional Bene�ts Investor
Software Engineering
Electronic Hardware Engineering
Systems Engineering
Airborne Software & Electronic Hardware Approvals/Certi�cation (DARs)
Program Management
Health & usage monitoring systems (HUMS) Space Systems & Software Expert consulting Stall Warning Systems Gas turbine controls/FADEC RTCA/DO-178B/C Safety Analysis SAE ARP 4761 Avionics systems & software Automotive controllers Flight Management Systems Energy/Industrial gas turbine controls TCCA Design Approval Representatives Ground support equipment RTCA/DO-278/A Program & Project Management SAE ARP 4754 Flight controls Airborne Electronic Hardware RTCA/DO-254 Simulation Fuel Quantity Indication/Body Tank Controller Airborne embedded systems UAV systemsAerospace Certi�cation
MANNARINO has signi�cant experience in the aerospace certi�cation process per the following guidelines and aerospace recommended practices:
¦ RTCA/DO-178B/C ~ Software Considerations in Airborne Systems and Equipment Certi�cation
¦ RTCA/DO-254 ~Design Assurance Guidance for Airborne Electronic Hardware
¦ SAE ARP 4754A ~ Guidelines for Development of Civil Aircraft and Systems
¦ SAE ARP 4761 ~ Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment
¦ RTCA/DO-278/A ~ Guidelines for Communication, Navigation, Surveillance and Air Traf�c Management Systems Software Integrity Assurance
MANNARINO has led and participated in program audits with the following certi�cation authorities and/or associate delegates:
¦ Federal Aviation Administration (FAA)
¦ Transport Canada Civil Aviation (TCCA)
¦ European Aviation Safety Agency (EASA)
¦ Directorate of Technical Airworthiness and Engineering Support (DTAES-5)
MANNARINO Services
MANNARINO is highly specialized in the following areas:
1 - Airborne Embedded Software (RTCA/DO-178B/C)
¦ Avionics systems & software (Level A to D)
¦ Gas turbine Full Authority Digital Engine Controls (FADEC) systems & software
¦ Health & Usage Monitoring Systems (HUMS)
¦ Aerial refueling systems
¦ Ground Support Equipment (GSE) software
¦ Unmanned aircraft systems
2 - Airborne Software and Airborne Electronic Hardware Approvals/Certi�cation
¦ Airborne software (RTCA/DO-178B/C)
¦ Airborne electronic hardware (RTCA/DO-254)
3 - Industrial Gas Turbine Controls Software & Simulation ¦ Systems and software requirements development
¦ Software design
¦ Systems and software veri�cation/validation testing
4 - Training in the development of airborne software (RTCA/DO-178B/C)
¦ 3 day seminar on RTCA/DO-178B/C
¦ Optional 4th day focusing on RTCA/DO-178C Supplements & Tool Quali�cation
Business Development Tony Gentile (860) [email protected]
Airborne Software & Electronic Hardware Approvals/Certi�cation (DARs)
TRANSPORT CANADA CIVIL AVIATION (TCCA) DELEGATE SERVICES
To further complement our offering to our customers, MANNARINO provides Transport Canada Civil Aviation (TCCA) delegate services. TCCA Design Approval Representatives (DAR) are on staff for the following disciplines:
¦ Airborne software (RTCA/DO-178B/C)
¦ Airborne Electronic Hardware (AEH) (RTCA/DO-254)
www.mss.caSue Dabrowski (514) [email protected]
100 Alexis Nihon Boulevard, Suite 650, Saint-Laurent, Québec, Canada, H4M 2P2Tel: (514) 381-1360 • Fax: (514) 381-7511
Mannarinno_recto_final_mai2015D1.pdf 1 2015-05-01 14:00
MANNARINO is a world-class engineering services �rm specialized in the development, veri�ca-tion and validation of safety-critical systems, software and electronic hardware for the aerospace, defence, space, simulation and power generation industries. Founded in 1999, MANNARINO has contributed towards research and development projects for some of the world’s largest corpo-rations. Details on our offering can be found inside this brochure.
For further information, please refer to the contact information below:
MANNARINO Systems and Software Inc.
Our Industrial Regional Bene�ts Investor
Software Engineering
Electronic Hardware Engineering
Systems Engineering
Airborne Software & Electronic Hardware Approvals/Certi�cation (DARs)
Program Management
Health & usage monitoring systems (HUMS) Space Systems & Software Expert consulting Stall Warning Systems Gas turbine controls/FADEC RTCA/DO-178B/C Safety Analysis SAE ARP 4761 Avionics systems & software Automotive controllers Flight Management Systems Energy/Industrial gas turbine controls TCCA Design Approval Representatives Ground support equipment RTCA/DO-278/A Program & Project Management SAE ARP 4754 Flight controls Airborne Electronic Hardware RTCA/DO-254 Simulation Fuel Quantity Indication/Body Tank Controller Airborne embedded systems UAV systemsAerospace Certi�cation
MANNARINO has signi�cant experience in the aerospace certi�cation process per the following guidelines and aerospace recommended practices:
¦ RTCA/DO-178B/C ~ Software Considerations in Airborne Systems and Equipment Certi�cation
¦ RTCA/DO-254 ~Design Assurance Guidance for Airborne Electronic Hardware
¦ SAE ARP 4754A ~ Guidelines for Development of Civil Aircraft and Systems
¦ SAE ARP 4761 ~ Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment
¦ RTCA/DO-278/A ~ Guidelines for Communication, Navigation, Surveillance and Air Traf�c Management Systems Software Integrity Assurance
MANNARINO has led and participated in program audits with the following certi�cation authorities and/or associate delegates:
¦ Federal Aviation Administration (FAA)
¦ Transport Canada Civil Aviation (TCCA)
¦ European Aviation Safety Agency (EASA)
¦ Directorate of Technical Airworthiness and Engineering Support (DTAES-5)
MANNARINO Services
MANNARINO is highly specialized in the following areas:
1 - Airborne Embedded Software (RTCA/DO-178B/C)
¦ Avionics systems & software (Level A to D)
¦ Gas turbine Full Authority Digital Engine Controls (FADEC) systems & software
¦ Health & Usage Monitoring Systems (HUMS)
¦ Aerial refueling systems
¦ Ground Support Equipment (GSE) software
¦ Unmanned aircraft systems
2 - Airborne Software and Airborne Electronic Hardware Approvals/Certi�cation
¦ Airborne software (RTCA/DO-178B/C)
¦ Airborne electronic hardware (RTCA/DO-254)
3 - Industrial Gas Turbine Controls Software & Simulation ¦ Systems and software requirements development
¦ Software design
¦ Systems and software veri�cation/validation testing
4 - Training in the development of airborne software (RTCA/DO-178B/C)
¦ 3 day seminar on RTCA/DO-178B/C
¦ Optional 4th day focusing on RTCA/DO-178C Supplements & Tool Quali�cation
Business Development Tony Gentile (860) [email protected]
Airborne Software & Electronic Hardware Approvals/Certi�cation (DARs)
TRANSPORT CANADA CIVIL AVIATION (TCCA) DELEGATE SERVICES
To further complement our offering to our customers, MANNARINO provides Transport Canada Civil Aviation (TCCA) delegate services. TCCA Design Approval Representatives (DAR) are on staff for the following disciplines:
¦ Airborne software (RTCA/DO-178B/C)
¦ Airborne Electronic Hardware (AEH) (RTCA/DO-254)
www.mss.caSue Dabrowski (514) [email protected]
100 Alexis Nihon Boulevard, Suite 650, Saint-Laurent, Québec, Canada, H4M 2P2Tel: (514) 381-1360 • Fax: (514) 381-7511
Mannarinno_recto_final_mai2015D1.pdf 1 2015-05-01 14:00
