Our Mission - Carbide Specialties Catalog Web.pdf · Onsrud Cutter Stark Terminus Technologies...

Our Mission

Excellent customer service is what you can count on when dealing with our staff and our

state of the art products.

We strive to provide you with the highest quality tooling along with excellent service and

support, guaranteed.

A little bit about Carbide Specialties Inc.

With over 40 years of experience in the manufacturing of cutting tools you can be assured of getting the highest quality tooling for all of your manufacturing needs. We offer

complete design and manufacturing of router bits, shaper cutters, knives, saw blades, rosettes, inserts, slotters and diamond tooling. All of our specialty tools are designed to

your sample product, existing print, or your exact specifications.

Through utilization of our CNC automatic machinery we give a superior finish to your

tools whether it is a saw blade, router bit, end mill, or specialty tool.

Sharpening and Repair

As a full service cutting tool manufacturer we offer sharpening and repair of cutting tools both manufactured by us and any other cutting tool manufacturer. All service is done on

the same machines used to manufacture our tooling to assure the same quality of cutting edges as our new tools.

Our Expansive Product Offerings

Carbide Specialties strives to offer you, our customers, the widest selection of cutting tools available. As such we also distribute a wide selection of name brand cutting tools

from the following companies.

Amana Tool Corporation

Byrd Tool Company Charles G.G. Schmidt Co.

Forest City Tool

Freud FS Tool Company

Freeborn Tool Guhdo

Lach Diamond

Leitz Tooling LRH Enterprises

Onsrud Cutter

Stark Terminus Technologies Whiteside Machine Co.

Wisconsin Knife Works W. L. Fuller

Velepec Unimerco

Morris Wood Tool

Techniks Tenryu

Tigra

Timberline Southeast Tool Primark

Stehle USA Rico

Hartlauer Tersa

Toolmasters

1 www.carbidespecialt ies.com sales@carbidespecialt ies.com

Table of Contents

Contents Page Solid Carbide Router Tooling

102-100 Series Solid Carbide Double Flute Mortise Compression Spiral Router Bits 2 102-300 Series Solid Carbide Double Flute Compression Spiral Router Bits 2 102-400 Series Solid Carbide Double Flute Up Cut Spiral Router Bits 3 102-500 Series Solid Carbide Double Flute Down Cut Spiral Router Bits 4 103-100 Series Solid Carbide Triple Flute Mortise Compression Spiral Router Bit 5

103-300 Series Solid Carbide Triple Flute Compression Spiral Router Bit 5 106-300 Series Solid Carbide Triple Flute Up Cut Spiral Rougher Router Bit 6 107-300 Series Solid Carbide Triple Flute Down Cut Spiral Rougher Router Bit 6

Collets & Accessories SYOZ 25 Series Collets (RD035) 7 ER Series Collets 8

ER Series High Speed Coated Collet Nuts 9 ER Style Tool Extenders & Parts 9

Drilling Tools and Accessories Solid Carbide Dowel Drills, Brad Point, 57mm OAL, and 10mm Shank 10 Solid Carbide Dowel Drills, Brad Point, 70mm OAL, and 10mm Shank 10

Solid Carbide Dowel Drills, Through Point, 70mm OAL, and 10mm Shank 11 Solid Carbide Twist Drills, Drill Point and Straight Shank 11 Solid Carbide Twist Drills, Brad Point and Straight Shank 12 Adapters for Solid Carbide Twist Drills 12 Bushings for Solid Carbide Twist Drills 13 Carbide Tipped Dowel Bits, Brad Point, 57.5mm OAL, and 10mm Shank 14 Carbide Tipped Dowel Bits, Brad Point, 70mm OAL, and 10mm Shank 15 Carbide Tipped Dowel Bits, Brad Point, 77mm OAL, and 10mm Shank 16 Carbide Tipped Dowel Bits, Through Point, 57.5mm OAL, and 10mm Shank 17 Carbide Tipped Dowel Bits, Through Point, 70mm OAL, and 10mm Shank 18 Carbide Tipped Dowel Bits, Through Point, 77mm OAL, and 10mm Shank 19

Spare Parts for Dowel Drills 19 Carbide Tipped Hinge Boring Bits, 57.5mm OAL and 10mm Shank 20 Carbide Tipped Hinge Boring Bits, 70mm OAL and 10mm Shank 21 Spare Parts for Dowel Drills 21

Solid Carbide Insert Knives Solid Carbide Indexable Insert Knives 22

Custom Ground Shaper & Moulder Cutters 23 Custom Ground Router Bits 24 Custom Ground Knives 25 Custom Ground Rosette Cutters 26 Custom Ground Countersinks and Counterbores 27 Custom Carbide Tipped Circular Saw Blades 28

Custom Tooling Information

2 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

♦ Compression sty le has both up cutting flutes at the tip of the bit and down cutting flutes at the shank side of the bit. This allows for both clean top and bottom surfaces on y our materials.

♦ Compression sty le designed for fast feed rates in most materials.

♦ Designed with a 1/4” or less up cut.

♦ High quality carbide for the best cutting edges and longest tool life.

Te

chni

cal ♦ Mortise cuts or grooves in materials that require a

down cut on the surface to prevent chipping or fuzzing of the surface lay er.

♦ Cutting materials with surface treatments on both sides that are thinner than a standard compression bit can accomplish.

Ap

plic

atio

ns

102-100 Series 2 Flute Solid Carbide Mortise Spiral Router Bits

Cutting Diameter

Cutting Length

Shank Diameter

Over All Length

Tool #

0.250” 1.000” 0.250” 2.500” 102-120

0.375” 1.000” 0.375” 3.000” 102-145

0.375” 1.625” 0.375” 4.000” 102-147

0.500” 1.250” 0.500” 3.000” 102-167

0.500” 1.625” 0.500” 4.000” 102-170

Metric Diameters available upon request.

102-300 Series 2 Flute Solid Carbide Compression Spiral Router Bit

Cutting Diameter

Cutting Edge Length

Shank Diameter

Over All Length

Tool #

0.250” 0.875” 0.250” 2.500” 102-320

0.375” 1.125” 0.375” 3.000” 102-345

0.375” 1.625” 0.375” 4.000” 102-348

0.375” 1.750” 0.375” 4.000” 102-349

0.375” 1.750” 0.375” 4.000” 102-349L

0.500” 1.000” 0.500” 3.000” 102-360

0.500” 1.250” 0.500” 3.000” 102-365

0.500” 1.250” 0.500” 3.000” 102-365L

0.500” 1.625” 0.500” 4.000” 102-367

0.500” 1.625” 0.500” 4.000” 102-367L

0.500” 1.750” 0.500” 4.000” 102-368

0.500” 2.000” 0.500” 4.500” 102-369

0.500” 2.500” 0.500” 4.500” 102-370

0.500” 2.750” 0.500” 5.000” 102-372

0.750” 2.000” 0.750” 4.000” 102-382

0.750” 2.500” 0.750” 5.000” 102-385

0.750” 2.750” 0.750” 5.000” 102-390

0.750” 3.500” 0.750” 6.000” 102-395

L = Left Hand Rotation Metric diameters available upon request.

♦ Compression sty le has both up cutting flutes at the tip of the bit and down cutting flutes at the shank side of the bit. This allows for both clean top and bottom surfaces on y our materials.



Te

chni

cal

♦ Cutting material with surface treatments on both sides.

♦ Cutting both man-made materials with veneers and laminates on both sides and natural woods.

♦ The use of left hand and right hand tools can allow a user to climb cut in both directions to control blow out. A

ppl

icat

ion

s


102-400 Series 2 Flute Solid Carbide Up Cut Spiral Router Bit

Cutting Diameter

Cutting Edge Length

Shank Diameter

Over All Length

Tool #

0.250” 0.750” 0.250” 2.500” 102-419

0.250” 0.875” 0.250” 2.500” 102-420

0.250” 1.000” 0.250” 2.500” 102-421

0.250” 1.125” 0.250” 3.000” 102-425

0.250” 1.250” 0.250” 3.000” 102-427

0.281” 1.000” 0.312” 2.500” 102-430

0.312” 1.125” 0.312” 3.000” 102-435

0.375” 1.000” 0.375” 3.000” 102-443

0.375” 1.125” 0.375” 3.000” 102-445

0.375” 1.250” 0.375” 3.000” 102-450

0.375” 1.750” 0.375” 4.000” 102-457

0.375” 2.125” 0.375” 4.000” 102-458

0.500” 1.000” 0.500” 3.000” 102-460

0.500” 1.250” 0.500” 3.000” 102-465

0.500” 1.625” 0.500” 4.000” 102-467

0.500” 2.000” 0.500” 4.000” 102-469

0.500” 2.125” 0.500” 4.000” 102-470

0.750” 3.000” 0.750” 6.000” 102-480

0.750” 3.000” 0.750” 5.000” 102-481

Metric diameters available upon request.

♦ Upcut spiral flutes for upward chip flow.

♦ End geometry allows for good plunging through most materials.

♦ Helical design to minimize contact area and improve finish quality .

♦ High quality carbide for the best cutting edges and longest tool life. T

ech

nica

l ♦ Excellent cuts in materials that require no special consideration due to surface treatments.

♦ Use where extremely smooth cuts are required.

♦ Great for grooving in materials requiring smooth cuts and fast chip flow out of the cutting area.

♦ Good for applications that require plunge cuts or drilling. A

ppl

icat

ion

s

♦ Due to the upward chip flow of these tools they have a tendency to “lift” the parts in some cases. Additional holding power or the use of a stepped cutting sy stem may be required.

♦ On certain materials fuzzing may be experienced on the top surface. If this is a real problem consider using the compression sty le tools on page 2.

Con

side

ratio

ns

4 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

102-500 Series 2 Flute Solid Carbide Down Cut Spiral Router Bit

Cutting Diameter

Cutting Edge Length

Shank Diameter

Over All Length

Tool #

0.250” 0.750” 0.250” 2.000” 102-519

0.250” 0.875” 0.250” 2.500” 102-520

0.250” 1.000” 0.250” 2.500” 102-521

0.250” 1.125” 0.250” 3.000” 102-525

0.250” 1.250” 0.250” 3.000” 102-527

0.281” 1.000” 0.312” 2.500” 102-530

0.312” 1.125” 0.312” 3.000” 102-535

0.375” 1.000” 0.375” 3.000” 102-543

0.375” 1.125” 0.375” 3.000” 102-545

0.375” 1.250” 0.375” 3.000” 102-550

0.375” 1.750” 0.375” 4.000” 102-557

0.375” 2.125” 0.375” 4.000” 102-558

0.500” 1.000” 0.500” 3.000” 102-560

0.500” 1.250” 0.500” 3.000” 102-565

0.500” 1.625” 0.500” 4.000” 102-567

0.500” 2.000” 0.500” 4.000” 102-569

0.500” 2.125” 0.500” 4.000” 102-570

0.750” 3.000” 0.750” 6.000” 102-580

0.750” 3.500” 0.750” 6.000” 102-581

0.750” 3.000” 0.750” 5.000” 102-582


♦ Downcut spiral flutes for downward chip flow.

♦ Helical design to minimize contact area and improve finish quality .

♦ High quality carbide for the best cutting edges and longest tool life. T

ech

nica

l

♦ Excellent cuts in materials that require no special considerations due to surface treatments.

♦ Use where extremely smooth cuts are required.

♦ Great for cutting in nested materials requiring preservation of vacuum. Tool tends to pack the cut with chips.

♦ Good for applications that need additional help holding parts down on tables and pods.

Ap

plic

atio

ns

♦ Due to the downward chip flow of these tools they have a tendency to force chips into the parts being cut in most cases. Grooving applications can be difficult as burning can occur.

♦ On certain materials fuzzing may be experienced on the bottom surface. If this is a real problem consider using the compression sty le tools on page 2.

♦ End geometry does not allow for good plunging through materials

Con

side

ratio

ns


103-100 Series 3 Flute Solid Carbide Mortise Compression Spiral

Cutting Diameter

Cutting Edge Length

Shank Diameter

Over All Length

Tool #

0.500” 1.125” 0.500” 4.000” 103-167


0.500” 1.625” 0.500” 4.000” 103-170

♦ Compression sty le has both upshear and downshear design. This allows for both clean top and bottom surfaces on y our materials.

♦ Three flutes for very fast feed rates.


♦ Designed with a 1/4” or less up cut.


Te

chni

cal

♦ Mortise cuts or grooves in materials that require a down cut on the surface to prevent chipping or fuzzing of the surface lay er.

♦ High production routing of laminated materials.

♦ Cutting material with surface treatments on both sides that are thinner than a standard compression bit can accomplish. A

ppl

icat

ion

s

103-300 Series 3 Flute Solid Carbide Compression Spiral Router Bit

Cutting Diameter

Cutting Edge Length

Shank Diameter

Over All Length

Tool #

0.375” 1.125” 0.375” 3.000” 103-345

0.500” 1.000” 0.500” 3.000” 103-360

0.500” 1.250” 0.500” 3.000” 103-365

0.500” 1.625” 0.500” 4.000” 103-367

0.750” 2.000” 0.750” 4.000” 103-382


♦ Compression sty le has both upshear and downshear design. This allows for both clean top and bottom surfaces on y our materials.




Te

chni

cal

♦ Cutting material with surface treatments on both sides.

♦ High production routing of laminated materials.

♦ Cutting both man-made materials with veneers and laminates on both sides and natural woods.

♦ The use of left hand and right hand tools can allow a user to climb cut in both directions to control tear out.

Ap

plic

atio

ns

6 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

106-300 Series 3 Flute Solid Carbide Up Cut Rougher RB

Cutting Diameter

Cutting Edge Length

Shank Diameter

Over All Length

Tool #

0.750” 2.000” 0.750” 4.000” 106-382


0.750” 2.500” 0.750” 5.000” 106-390

107-300 Series 3 Flute Solid Carbide Down Cut Rougher RB

Cutting Diameter

Cutting Edge Length

Shank Diameter

Over All Length

Tool #

0.750” 2.000” 0.750” 4.000” 107-382


0.750” 2.500” 0.750” 5.000” 107-390

♦ Ground with a rippled cutting edge.



♦ End geometry allows for good plunging through most materials. T

ech

nica

l ♦ Used for heavy and fast feeds through dense materials such as hardwoods and plywood.

♦ Designed for use on CNC routers as a first cut ty pe tool to be followed by a finishing tool.

♦ This bit leaves a scalloped edge cut on the material.

♦ These bits are extremely quiet and smooth cutting.

♦ Upcut for good chip flow to improve dust collection.

Ap

plic

atio

ns

♦ Ground with a rippled cutting edge.



♦ End geometry does not allow for good plunging through most materials. T

ech

nica

l ♦ Used for heavy and fast feeds through dense materials such as hardwoods and plywood.

♦ Designed for use on CNC routers as a first cut ty pe tool to be followed by a finishing tool.

♦ This bit leaves a scalloped edge cut on the material.

♦ These bits are extremely quiet and smooth cutting.

♦ Downcut to assist part holding during heavy feeds. Ap

plic

atio

ns


SYOZ 25 Series Collets (RD035) 35mm Diameter x 52mm Length

Inside Diameter

Part #

1/8” 03868-1/8

3/16” 03868-3/16

1/4” 03868-1/4

5/16” 03868-5/16

3/8” 03868-3/8

7/16” 03868-7/16

1/2” 03868-1/2

9/16” 03868-9/16

5/8” 03868-5/8

3/4” 03868-3/4

7/8” 03868-7/8

1” 03868-1

10 mm 03868-10

16 mm 03868-16

20 mm 03868-20

25 mm 03868-25

Many more Toolholders and Collets Available. Please Call.

8 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

ER Series Collets Internal

Diameter ER11 ER16 ER20 ER25 ER32 ER40

1/16” 04211-1/16 04216-1/16

3/32” 04211-3/32 04216-3/32 04220-3/32 04225-3/32 04232-3/32

1/8” 04211-1/8 04216-1/8 04220-1/8 04225-1/8 04232-1/8 04240-1/8

5/32” 04211-5/32 04216-5/32 04220-5/32 04225-5/32 04232-5/32 04240-5/32

3/16” 04211-3/16 04216-3/16 04220-3/16 04225-3/16 04232-3/16 04240-3/16

7/32” 04211-7/32 04216-7/32 04220-7/32 04225-7/32 04232-7/32 04240-7/32

1/4” 04211-1/4 04216-1/4 04220-1/4 04225-1/4 04232-1/4 04240-1/4

9.32” 04216-9/32 04220-9/32 04225-9/32 04232-9/32 04240-9/32

5/16” 04216-5/16 04220-5/16 04225-5/16 04232-5/16 04240-5/16

8 mm 04216-8 04220-8 04225-8 04232-8 04240-8

11/32” 04216-11/32 04220-11/32 04225-11/32 04232-11/32 04240-11/32

3/8” 04216-3/8 04220-3/8 04225-3/8 04232-3/8 04240-3/8

10 mm 04216-10 04220-10 04225-10 04232-10 04240-10

13/32” 04216-13/32 04220-13/32 04225-13/32 04232-13/32 04240-13/32

7/16” 04220-7/16 04225-7/16 04232-7/16 04240-7/16

15/32” 04220-15/32 04225-15/32 04232-15/32 04240-15/32

1/2” 04220-1/2 04225-1/2 04232-1/2 04240-1/2

17/32” 04225-17/32 04232-17/32 04240-17/32

9/16” 04225-9/16 04232-9/16 04240-9/16

19/32” 04225-19/32 04232-19/32 04240-19/32

5/8” 04225-5/8 04232-5/8 04240-5/8

21/32” 04232-21/32 04240-21/32

11/16” 04232-11/16 04240-11/16

23/32” 04232-23/32 04240-23/32

3/4” 04232-3/4 04240-3/4

1” 04240-1

Collet Style Length Diameter

ER11 18mm (0.708”) 11.5mm (0.45”)

ER16 27.5mm (1.08”) 17mm (0.67”)

ER20 31.5mm (1.24”) 21mm (0.83”)

ER25 34mm (1.34”) 26mm (1.02”)

ER32 40mm (1.57”) 33mm (1.3”)

ER40 46mm (1.81”) 41mm (1.61”)

ER Collet Measurements


ER Series High Speed Coated Collet Nuts

Nut Part #

Description

Dia.

I.D.

Length

Spanner Part

#

Max Clamping

Torque

46111 ER11 HS Nut 19 14 x .75 11.8 04608 20 ft. lbs.

46116 ER16 HS Nut 32 22 x 1.5 18 04613 50 ft. lbs

46120 ER20 HS Nut 35 25 x 1.5 19.5 04614 75 ft. lbs

46125 ER25 HS Nut 42 32 x 1.5 20.5 04615 95 ft. lbs.

46132 ER32 HS Nut 50 40 x 1.5 23 04616 125 ft. lbs

46140 ER40 HS Nut 63 50 x 1.5 26 04617 140 ft. lbs.

All dimensions are in Millimeters (mm) unless otherwise specified.

ER Style Tool Extenders & Parts Extender

Part # Shank

Diameter

O.A.L.

Diameter Collet Type

Wrench Part #

Nut Part #

04889 3/8” 124 mm 12 mm ER8 04620 23108

04891 1/2” 166.5 mm 16 mm ER11 04621 23111

04893 5/8” 158.5 mm 16 mm ER11 04621 23111

04895 1/2” 177 mm 22 mm ER16 04622 23116

04896 3/4” 165 mm 22 mm ER16 04622 23116

04897 1” 168 mm 28 mm ER20 04623 23120

04898 3/4” 140 mm 35 mm ER25 04624 23125

See page 8 for replacement collets.

♦ Coated nuts have a permanent coating that increases the clamping power.

♦ Power coated nuts increase holding power by up to 75% compared to stan-dard ER nuts.

♦ Tool life is increased by up to 20%.

Te

chni

cal

Used to extend the reach of the normal toolholder in deep routing applications. Extension length should not exceed a 4:1 ratio of length to diameter. For example, a 1/2” shank should not exceed more than 2” in front of the holder. This is true only for applications where the extension is rotating.

Te

chni

cal

10 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Solid Carbide Dowel Drills, Brad Point 2-Flute ● 57mm O.A.L ● 10mm Shank Diameter

Cutting Diameter

Flute Length

Shank Length

Right Hand Tool #

Left Hand Tool #

3 18 31 310.030.21 310.030.22

5/32” / 4 20 29 310.040.21 310.040.22

5 22 27 310.050.21 310.050.22

6 22 27 310.060.21 310.060.22

1/4” 22 27 310.064.21 310.064.22

8 27 27 310.080.41 310.080.42

10 27 27 310.100.41 310.100.42

12 27 27 D45L12R D45L12L


Solid Carbide Dowel Drills, Brad Point 2-Flute ● 70mm O.A.L. ● 10mm Shank Diameter

Cutting Diameter

Flute Length

Shank Length

Right Hand Tool #

Left Hand Tool #

3 18 43.5 311.030.21 311.030.22

5/32” / 4 27 34.5 311.040.21 311.040.22

5 30 31.5 311.050.21 311.050.22

6 30 31.5 311.060.21 311.060.22

1/4” 30 31.5 311.064.21 311.064.22

8 35 30 311.080.41 311.080.42

10 35 30 311.100.41 311.100.42

12 35 27 D45M12R D45M12L


♦ Solid tungsten carbide flute portion with a cen-ter point and two cutting edges.

♦ Two curved negatively ground spurs.

♦ Premium quality super strength steel shank. ♦ Parallel shank with a machined flat for driving

and a length adjusting screw. Te

chni

cal

♦ The solid carbide flutes of these tools are made from premium quality micrograin carbide for extended tool life and superior cutting edge quality .

♦ Ideal for hardwoods and difficult composites such as particle board, MDF, and veneer.

♦ Great tools for high speed boring machines.

♦ Advanced point design reduces drilling resistance and increases production speed.

Ap

plic

atio

ns


Solid Carbide Dowel Drills, Through Point 2 Flute ● 70mm O.A.L ● 10mm Shank Diameter

Cutting Diameter

Flute Length

Shank Length

Right Hand Tool #

Left Hand Tool #

5/32” / 4 27 34 314.040.21 314.040.22

5 30 31.5 314.050.21 314.050.22

6 35 27 D45Y06R D45Y06L

8 35 26 314.080.41 314.080.42


♦ Solid tungsten carbide spiral portion with 60° V-point and two cutting edges.

♦ Premium quality super strength steel shank.

♦ Parallel shank with a machined flat for driving and a length adjusting screw. T

ech

nica

l

♦ The solid carbide flutes of these tools are made from premium quality micrograin carbide for extended tool life and superior cutting edge quality .


♦ Great tools for high speed boring machines.

♦ Advanced point design reduces drilling resistance and increases production speed.

Ap

plic

atio

ns

Cutting Diameter

Flute Length

O.A.L. Right Hand Tool #

Left Hand Tool #

2 25 49 363.020.11 363.020.12

2.4 25 55 295024R 295024L

2.5 27 57 363.025.11 363.025.12

2.8 25 55 295028R 295028L

3 27 55 363.030.11 363.030.12

1/8” 27 52 363.032.11 363.032.12

3.5 27 52 363.035.11 363.035.12

5/32” / 4 27 55 363.040.11 363.040.12

4.5 28 58 363.045.11 363.045.12

5 28 62 363.050.11 363.050.12


Solid Carbide Twist Drills, Drill Point Shank diameter is the same as cutting diameter.

♦ Solid high grade micrograin tungsten carbide throughout.

♦ 120° V-point and two cutting edges.

♦ Used in adapters or bushings sold on pages 12 and 13. T

ech

nica

l ♦ The solid carbide flutes of these tools are made from premium quality micrograin carbide for extended tool life and superior cutting edge quality .


♦ Longer tool life over tipped ty pe dowel bits. Ap

plic

atio

ns

12 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Drill Diameter Capacity

O.A.L Item #

2 38 364.020.00

2.4 35 295024ADP

2.5 38 364.025.00

2.8 35 295028ADP

3 38 364.030.00

1/8” 38 364.032.00

3.5 38 364.035.00

5/32” / 4 38 364.040.00

4.5 38 364.045.00

5 38 364.050.00

1/4” 38 364063


Adapters for Solid Carbide Twist Drills 10mm Diameter x 20mm Length Shank

Solid Carbide Twist Drills, Brad Point Shank diameter is the same as cutting diameter.

Cutting Diameter

Flute Length

O.A.L. Right Hand Tool #

Left Hand Tool #

3 27 53 29503BR 29503BL

1/8” 27 53 295032BR 295032BL

3.5 27 53 295035BR 295035BL

5/32” / 4 27 53 29504BR 29504BL

4.5 27 53 295045BR 295045BL

5 27 53 29505BR 29505BL


♦ Solid high grade micrograin tungsten carbide with a center point and two cutting edges.

♦ Two curved negatively ground spurs.

♦ Used in adapters or bushings sold on this page and page 13. T

ech

nica

l

♦ The solid carbide flutes of these tools are made from premium quality micrograin carbide for extended tool life and superior cutting edge quality.


♦ Longer tool life over tipped type dowel bits. Ap

plic

atio

ns


Bushings for Solid Carbide Twist Drills 10mm Diameter x 23mm Length Shank

Drill Diameter Capacity

O.A.L Item #

2 23 365.020.00

2.5 23 365.025.00

3 23 365.030.00

1/8” 23 365.032.00

3.5 23 365.035.00

5/32” / 4 23 365.040.00

4.5 23 365.045.00

5 23 365.050.00


14 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Cutting Diameter

Flute Length

Shank Length

Right Hand Tool #

Left Hand Tool #

3 18 27 201003 301003

3.2 27 27 201032 301032

5/32” / 4 18 27 310.040.11 310.040.12

4.5 22 27 310.045.11 310.045.12

4.76 27 27 310.047.11 310.047.12

5 27 27 310.050.11 310.050.12

5.1 27 27 310.051.11 310.051.12

5.2 27 27 310.052.11 310.052.12

5.55 27 27 310.055.11 310.055.12

6 27 27 310.060.11 310.060.12

6.35 27 27 310.064.11 310.064.12

6.5 27 27 310.065.11 310.065.12

6.7 27 27 201067 301067

7 27 27 310.070.11 310.070.12

9/32” 30 27 134040R 134040L

7.5 27 27 201075 301075

8 27 27 310.080.11 310.080.12

8.2 27 27 310.082.11 310.082.12

8.5 30 27 134053R 134053L

11/32” 30 27 134054R 134054L

9 27 27 310.090.11 310.090.12

9.52 27 27 310.095.11 310.095.12

10 27 27 310.100.11 310.100.12

10.5 27 27 201105 301105

11 27 27 310.110.11 310.110.12

12 27 27 310.120.11 310.120.12

12.7 27 27 310.127.11 310.127.12

13 27 27 310.130.11 310.130.12

14 27 27 310.140.11 310.140.12

15 27 27 310.150.11 310.150.12

5/8” 30 27 134141R 134141L

16 27 27 310.160.11 310.160.12

17 27 27 201017 301017

18 27 27 201018 301018

19 27 27 201019 301019

20 27 27 201020 301020


Carbide Tipped Dowel Bits, Brad Point 2 Flute ● 57.5mm O.A.L. ● 10mm Shank Diameter

♦ Premium quality super strength steel body.

♦ Two flutes coated with Teflon™, black for right hand bits and orange for left hand bits.

♦ Solid tungsten carbide tip with center point, two cutting edges, and two negatively ground spurs.

♦ Parallel ground shank with machined flat for driving and a length adjusting screw.

Te

chni

cal

♦ Drilling of blind holes in wood, wood composites, plastic, and laminated materials.

♦ Used in boring machines equipped with adapters or chucks.

Ap

plic

atio

ns


Carbide Tipped Dowel Drills, Brad Point 2 Flute ● 70mm O.A.L. ● 10mm Shank Diameter

Cutting Diameter

Flute Length

Shank Length

Right Hand Tool #

Left Hand Tool #

3 18 35 204003 304003

3.2 35 35 204032 304032

5/32” / 4 26 30 311.040.11 311.040.12

4.5 35 30 311.045.11 311.045.12

3/16” 35 30 311.047.11 311.047.12

5 35 30 311.050.11 311.050.12

5.1 35 30 311.051.11 311.051.12

5.2 35 30 311.052.11 311.052.12

7/32” 35 30 311.055.11 311.055.12

6 35 30 311.060.11 311.060.12

1/4” 35 30 311.064.11 311.064.12

6.5 35 30 311.065.11 311.065.12

6.7 35 35 204067 304067

7 35 30 311.070.11 311.070.12

9/32” 41 29 1340431R 1340431L

7.5 35 35 204075 304075

8 35 30 311.080.11 311.080.12

8.2 35 30 311.082.11 311.082.12

8.5 41 29 1340522R 1340522L

8.7 41 29 1340523R 1340523L

9 35 30 311.090.11 311.090.12

3/8” 35 30 311.095.11 311.095.12

10 35 30 311.100.11 311.100.12

11 35 30 311.110.11 311.110.12

7/16” 35 30 311.111.11 311.111.12

12 35 30 311.120.11 311.120.12

1/2” 35 30 311.127.11 311.127.12

13 35 30 311.130.11 311.130.12

14 35 30 311.140.11 311.140.11

15 35 30 311.150.11 311.150.12

5/8” 35 35 204113 304113

16 35 30 311.160.11 311.160.11

17 35 35 204075 304075

18 41 29 134162R 134162L

19 41 29 134163R 134163L

20 41 29 134164R 134164L






Te

chni

cal



Ap

plic

atio

ns

16 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Carbide Tipped Dowel Drills, Brad Point 2 Flute ● 77mm O.A.L. ● 10mm Shank Diameter

Cutting Diameter

Flute Length

Shank Length

Right Hand Tool #

Left Hand Tool #

5/32” / 4 44 30 202004 302004

5 44 30 362.050.11 362.050.12

5.1 44 30 202051 302051

5.2 44 30 202052 302052

5.5 48 29 1340217R 1340217L

6 44 30 362.060.11 362.060.12

1/4” 48 29 1340247R 1340247L

6.5 48 29 1340248R 1340248L

7 44 30 362.070.11 362.070.12

8 44 30 362.080.11 362.080.12

8.2 44 30 202082 302082

9 44 30 202090 302090

3/8” 48 29 1340717R 1340717L

10 44 30 362.100.11 362.100.12

11 44 30 202011 302011

12 44 30 362.120.11 362.120.12






Te

chni

cal



Ap

plic

atio

ns


Carbide Tipped Dowel Drills, Through Point 2 Flute ● 57.5mm O.A.L. ● 10mm Shank Diameter

Cutting Diameter

Flute Length

Shank Length

Right Hand Tool #

Left Hand Tool #

5/32” / 4 25 25 313004 413004

3/16” 31 26 324040R 324040L

5 27 26 313.050.11 313.050.12

5.2 31 26 324050R 324050R

5.5 31 26 324051R 324051L

6 27 26 313.060.11 313.060.12

1/4” 25 25 313007 413007

6.5 31 26 3240636R 3240636L

7 25 25 313070 413070

8 27 26 313.080.11 313.080.12

9 25 25 313090 413090

3/8” 25 25 313009 413009

10 27 26 313.100.11 313.100.12

11 31 26 32412R 32412L

12 25 25 313012 413012

1/2” 25 25 313013 413013

13 31 26 32415R 32415L

14 31 26 32416R 32416L

15 31 26 32417R 32417L

16 31 26 32418R 32418L




♦ Solid tungsten carbide tip with 60º included angle center point and two cutting edges.


Te

chni

cal

♦ Drilling of through holes in wood, wood composites, plastic, and laminated materials.


Ap

plic

atio

ns

18 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Cutting Diameter

Flute Length

Shank Length

Right Hand Tool #

Left Hand Tool #

5/32” / 4 30 26 314.040.11 314.040.12

4.5 40 20 D50K045R D50K045L

3/16” 35 26 314.047.11 314.047.12

4.83 40 20 D50K0483R D50K0483L

5 35 26 314.050.11 314.050.12

5.2 43 27 325050R 325050L

7/32” 35 26 314.055.11 314.055.12

6 35 26 314.060.11 314.060.12

1/4” 35 26 314.064.11 314.064.12

6.5 43 27 325065R 325065L

7 35 26 314.070.11 314.070.12

9/32” 40 40 314281 414281

8 35 26 314.080.11 314.080.12

21/64” 40 40 314833 414833

11/32” 40 40 314343 414343

9 35 26 314.090.11 314.090.12

3/8” 35 26 314.095.11 314.095.12

10 35 26 314.100.11 314.100.12

11 40 40 314011 414011

7/16” 40 40 314111 414111

12 35 26 314.120.11 314.120.12

13 43 27 325128R 325128L

1/2” 35 26 314.127.11 314.127.12

14 40 40 314014 414014

15 43 27 325130R 325130L

5/8” 40 40 314113 414113

16 40 40 314016 414016

16.5 43 27 325132R 325132L

17 43 27 325133R 325133L

18 43 27 325134R 325134L

19 43 27 325135R 325135L

20 43 27 325136R 325136L


Carbide Tipped Dowel Drills, Through Point 2 Flute ● 70mm O.A.L. ● 10mm Shank Diameter





Te

chni

cal

♦ Drilling of through holes in wood, wood composites, plastic, and laminated materials.


Ap

plic

atio

ns


Carbide Tipped Dowel Drills, Through Point 2 Flute ● 77mm O.A.L. ● 10mm Shank Diameter

Cutting Diameter

Flute Length

Shank Length

Right Hand Tool #

Left Hand Tool #

5/32” / 4 50 27 325047R 325047L

5 44 30 366.050.11 366.050.12

5.2 45 25 D50Z052R D50Z052L

5.5 50 27 325058R 325058L

6 44 30 366.060.11 366.060.12

1/4” 50 27 325068R 325068L

9/32” 50 27 325070R 325070L

8 44 30 366.080.11 366.080.12

8.2 50 27 325088R 325088L

9 50 27 325089R 325089L

10 44 30 366.100.11 366.100.12

12 44 30 366.120.11 366.120.12


Description Item Number

M5 x 10mm Shank Screw 990.003.00

Spare Parts for Dowel Drills





Te

chni

cal ♦ Drilling of through holes in wood, wood

composites, plastic, and laminated materials.


Ap

plic

atio

ns

20 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Carbide Tipped Hinge Boring Bits 57.5mm O.A.L. ● 10mm Shank Diameter

Cutting Diameter

Shank Length

Right Hand Tool #

Left Hand Tool #

14 26 317.140.11 317.140.12

9/16” 50800R 50800L

15 26 317.150.11 317.150.12

16 26 317.160.11 317.160.12

17 26 317.170.11 317.170.12

18 26 317.180.11 317.180.12

19 26 317.190.11 317.190.12

3/4” 203751 203755

19.7 508032R 508032L

20 26 317.200.11 317.200.12

22 26 317.220.11 317.220.12

7/8” D14A7/8R D14A7/8L

24 26 317.240.11 317.240.12

25 26 317.250.11 317.250.12

26 26 317.260.11 317.260.12

1-1/16” 508080R 508080L

28 26 317.280.11 317.280.12

30 26 317.300.11 317.300.12

32 26 317.320.11 317.320.12

34 50812R 50812L

35 26 317.350.11 317.350.12

36 50814R 50814L

38 26 317.380.11 317.380.12

40 26 317.400.11 317.400.12

44 508161R 508161L

55 508162R 508162L

58 508163R 508163L


♦ Premium quality super strength steel body. ♦ Two flutes coated with Teflon™, black for

right hand bits and orange for left hand bits. ♦ Two precision ground tungsten carbide

cutting edges and two negatively ground carbide spurs.


Te

chni

cal

♦ Drilling of hinge holes in wood, wood composites, plastic, and laminated materials.


Ap

plic

atio

ns


Carbide Tipped Hinge Boring Bits 70mm O.A.L. ● 10mm Shank Diameter

Cutting Diameter

Shank Length

Right Hand Tool #

Left Hand Tool #

13 203132 203134

14 26 369.140.11 369.140.12

9/16” 203146 203148

15 26 369.150.11 369.150.12

16 26 369.160.11 369.160.12

17 508022R 508022L

18 26 369.180.11 369.180.12

3/4” 203752 203754

20 26 369.200.11 369.200.12

22 26 369.220.11 369.220.12

24 508043R 508043L

25 26 369.250.11 369.250.12

26 26 369.260.11 369.260.12

28 508082R 508082L

30 26 369.300.11 369.300.12

32 508085R 508085L

34 508087R 508087L

35 26 369.350.11 369.350.12

36 508133R 508133L

38 508135R 508135L

40 26 369.400.11 369.400.12

44 508138R 508138L

45 508139R 508139L


Description Item Number

M5 x 10mm Shank Screw 990.003.00

Spare Parts for Hinge Boring Bits

♦ Premium quality super strength steel body. ♦ Two flutes coated with Teflon™, black for

right hand bits and orange for left hand bits. ♦ Two precision ground tungsten carbide

cutting edges and two negatively ground carbide spurs.


Te

chni

cal

♦ Drilling of hinge holes in wood, wood composites, plastic, and laminated materials.


Ap

plic

atio

ns

22 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Solid Carbide Indexable Insert Knives Sold in boxes of 10 pieces.

Dimension CE x W x T

Tool #

Configuration Notes

10.5 x 12 x 1.5 13167 1 Hole

12 x 12 x 1.5 IK12 4 Sided

14 x 14 x 1.2 IK14S 4 Sided

14 x 14 x 2 IK14 4 Sided

14.3 x 14.3 x 2.5 13329 4 Sided

15 x 12 x 1.5 IK15 1 Hole

15 x 15 x 2.5 13320 Radius Edge

19.5 x 12 x 1.5 13498 4 Sided

20 x 5.5 x 1.1 13355 Back Groove

20 x 12 x 1.5 IK20 1 Hole

29.5 x 9 x 1.5 13504 4 Sided

29.5 x 12 x 1.5 13507 4 Sided

30 x 5.5 x 1.1 13345 Front Groove

30 x 8 x 1.5 13461 Face Groove

30 x 9 x 1.5 AMA-30 4 Sided

30 x 12 x 1.5 IK30 2 Hole

35 x 5.5 x 1.1 13377 4 Side & Face Groove

40 x 12 x 1.5 IK40 2 Hole

44.5 x 5.5 x 1.1 13375 4 Side & Face Groove

50 x 9 x 1.5 AMA-50 4 Sided

49.5 x 12 x 1.5 13520 4 Sided

50 x 5.5 x 1.1 13361 Face Groove

50 x 5.5 x 1.1 IK505511BG Back Groove

50 x 8 x 1.5 13464 Face Groove

50 x 12 x 1.5 IK50 2 Hole

50 x 12 x 1.7 13327 4 Sided & 3 Holes

56 x 5.5 x 1.1 IK56 Back Groove



Custom Ground Shaper & Moulder Cutters

Carbide Specialties Incorporated can manufacture any custom shaper, moulder, or tenoning cutters your company may need. We can also make cutters for table saws and aggregate heads on CNC routers.

When ordering please provide the following: ♦ A sketch, CAD file, or material sample. ♦ The quantity required. ♦ The rotation and orientation of your cutter. (See Below) ♦ The material thickness. ♦ The small and large diameter of the cutter if critical to the

machine or application. ♦ The bore diameter. ♦ Keyway and pinhole specifications. ♦ The number of wings. ♦ The tipping material. We can make cutters in carbide,

Tantung™ and polycrystalline diamond. ♦ The hook angle and shear angle. ♦ Any special requirements to your application. ♦ The material type. (Wood, Plastic, aluminum, etc…) ♦ The grain orientation of natural woods. (With grain or cross

grain.) ♦ The machine the tool is for. (Shaper, moulder, tenoner,

etc…) ♦ Any fixturing methods that may affect the design of the

tool.

24 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Custom Ground Router Bits

When ordering please provide the following: ♦ A sketch, CAD file, or material sample. ♦ The quantity required. ♦ The rotation and orientation of your bit. ♦ The material thickness. ♦ The small and large diameter of the bit if critical to the

machine or application. ♦ The shank diameter. ♦ The number of flutes. ♦ The tipping material. We can make bits in carbide,

Tantung™ and polycrystalline diamond. ♦ The hook angle and shear angle. ♦ Any special requirements to your application. ♦ The material type. (Wood, Plastic, aluminum, etc…) ♦ The grain orientation of natural woods. (With grain or cross

grain.) ♦ The machine the tool is for such as CNC or hand router. ♦ Any fixturing methods that may affect the design of the

tool.


Custom Ground Knives

When ordering please provide the following: ♦ A sketch, CAD file, or material sample. ♦ The quantity required. ♦ The rotation and orientation of your knives. ♦ Which head the knives will be run in on a moulder. ♦ The material thickness. ♦ The small and large height of the knives if critical to the

machine or application. ♦ The knife type such as high speed steel, carbide tipped,

or Tantung™ tipped. ♦ The knife style such as Williams & Hussey, shaper

knives, corrugated back, or smooth back. ♦ Any special requirements to your application. ♦ The material type. (Wood, Plastic, aluminum, etc…) ♦ The grain orientation of natural woods. (With grain or

cross grain.) ♦ The machine the tool is for. ♦ Any fixturing methods that may affect the design of the

tool.

26 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Custom Ground Rosette Cutters

When ordering please provide the following: ♦ A sketch, CAD file, or material sample. ♦ Profile diameter. ♦ Profile depth. ♦ The quantity required. ♦ The rotation and orientation of your bit. ♦ The large diameter of the bit if critical to the

machine or application. ♦ The shank diameter. ♦ The tipping material. We can make bits in

carbide, Tantung™ and polycrystalline diamond.

♦ Any special requirements to your application. ♦ The material type. (Wood, Plastic, aluminum,

etc…) ♦ Any fixturing methods that may affect the

design of the tool.


Custom Ground Countersinks and Counterbores

When ordering please provide the following: ♦ Quantity ♦ Rotation ♦ Material thickness ♦ Pilot length ♦ Flute length ♦ Large diameter ♦ Pilot diameter ♦ Shank diameter ♦ Overall length ♦ High speed steel, carbide tipped, Tantung™, or

solid carbide. ♦ Countersink or counterbore ♦ Type of material being cut. ♦ Angle of countersink for countersink bits.

28 Toll Free 1-800-678-3313 ● (616) 241-1424 ● Fax (616) 241-1506

Custom Tipped Circular Saw Blades

Carbide Specialt ies will supply all of your circular sawing needs. We produce an extensive line of high quality standard saw blades to fit any saw from the smallest handheld to the largest truss sawing machines. Our blades are manufactured to high industrial specifications so you

can count on extended tool life and superior cutting edge quality.

Custom saws can be manufactured to your specifications and our knowledgeable experienced staff can help you configure the best blade for your exact application.

We sell a full line of standard carbide tipped sawblades from Freud™, Amana™, FS Tool™,

and Tenryu™.

Terms & Conditions of Sales

Terms:

All accounts will be given Net 30 day terms if credit is deemed

satisfactory by the credit department. Any account over 60 days

will be on credit hold until the account is brought current. All

invoices correspond with date of shipment, not receipt of goods

or invoice. A $25.00 service charge will be added for all returned

checks.

We also accept:

Freight Policy:

F.O.B. Grand Rapids, MI. Any shortages in transit should be filed

with carrier. Any other shortages should be filed with Carbide

Specialties, Inc. nor more than 10 days after receiving goods.

Drop Shipments:

All drop shipments are subject to regular terms and conditions.

COD drop shipments will not be accepted.

Product Guarantee:

All tools carry a warranty to be free from defective

workmanship. Due to the inherent nature of solid carbide, we

cannot guarantee this material, all warranties are void if tools are

altered in any way (including sharpening).

Returning Goods:

All returns must be given prior consent by Carbide Specialties

Incorporated. A RGA# will be given and must be clearly placed

on the outside package. Carbide Specialties, Inc. reserves the

right to charge a 15% restocking fee. A copy of the invoice must

accompany the return. This applies to tools ordered in error and

returned for exchange. Any tool returned for credit must be a

current catalog item and in re-sellable condition. Carbide

Specialties, Inc. assumes no liability for returned tools. It is the

shippers responsibility to package the tools in a manner to avoid

damage in transit.

Minimum Order:

Orders must be a minimum of $25.00 net.

Safety:

Always wear eye and ear protection when working w ith cutting

tools. Do not remove any machine safety guards. The grinding

of carbide produces hazardous dust that may be harmful to your

health.

3941 Eastern Ave. S.E. Grand Rapids, MI 49508

Phone: 616-241-1424 Toll Free: 800-678-3313

Fax: 616-241-1506

Email: [email protected] www.carbidespecialties.com

&

3941 Eastern Ave. S.E.

Grand Rapids, MI 49508

Phone: 616-241-1424

Toll Free: 800-678-3313

Fax: 616-241-1506

Email: [email protected]

www.carbidespecialties.com

Date post:	03-May-2018
Category:	Documents
Upload:	duongthu
View:	217 times
Download:	1 times

Our Mission - Carbide Specialties Catalog Web.pdf · Onsrud Cutter Stark Terminus Technologies...

Documents