VENTED GAS FIREPLACES
Our Multi-View models offer several unique designs combining versatile style and
built-in value, with the flexibility of Direct Vent or B-Vent configurations.
Our name is our promise.
MULTI-VIEW SERIES
TRADITIONAL
FEATURED BELOW DRT40ST (See Through) with black painted interior
ON THE COVERDRT40ST (See Through) with Buff Stacked Ceramic Fiber Liner
"The best compliment about our house is that people say it looks like us, that it reflects our family."
Homeowner, SHARON B.
Our name is our promise.
The Superior® Multi-View Vented Gas
Fireplace Series offers several unique
designs that create statements of taste in
any home. Paradigms of beauty and value,
these fireplaces are available in two-sided
See Through, Corner* and three-sided
Peninsula configurations.
3*Custom Series only
FEATURED DRT40PF (Peninsula) with black painted interior
CUSTOM SERIES DIRECT VENT & B-VENT GAS MULTI-VIEW MODELS
DRT40CR/L (Corner), DRT40PF (Peninsula), DRT40ST (See Through) & BRT40ST (See Through) models
FEATURED DRT40CL (Corner Left) model with Buff Stacked Ceramic Fiber Liner
FEATURED Ceramic fiber "aged oak" log set with 1/2" heavy-duty grate
Buff Stacked Ceramic Fiber Liner
Black Painted Interior
Optional Touch Remote
INTERIOR
(Optional)
5
Listed to Z21.88 Gas Fireplace Heater
Listed to Z21.50 Decorative Gas Fireplace
Available in 40” clean-faced corner, peninsula & see through models
Available in 40” clean-faced see through models only
Combo top/rear flue configuration
Top flue configuration
Millivolt ignition
Energy saving electronic ignition
Pre-wired for wall switch
Outstanding heating efficiency for increased comfort and lower operating costs
Standard tempered glass and 2015 ANSI barrier compliant
Detailed ceramic fiber “aged oak” log set with 1/2" heavy-duty grate
Black painted interior (optional ceramic fiber liner available)
Durable textured powder coat finish
Optional blower and remote control available for all models
Uses IHP SV 4-1/2" x 7-1/2" Direct Vent Pipe
Uses 6" B-Vent Pipe
20 year limited warranty
DIRECT VENTDRT4000/BRT4000 MULTI-VIEW FEATURES B-VENT
PRO SERIES DIRECT VENT GAS MULTI-VIEW MODELS
DRT35PF (Peninsula) & DRT35ST (See Through) models
FEATURED DRT35PF (Peninsula) model with Buff Stacked Ceramic Fiber Liner
Buff Stacked Ceramic Fiber Liner
Black Painted Interior(standard)
FEATURED DRT35ST (See Through) with black painted interior
EXCLUSIVE FEATURES Available in 35" clean-faced see through and peninsula models
Combo top/rear flue configuration for all models
Millivolt or energy saving electronic ignition
Outstanding heating efficiency for increased comfort and lower operating costs
Standard tempered glass and 2015 ANSI barrier compliant
Detailed ceramic fiber “aged oak” log set with 1/2" heavy duty grate
Black painted interior (optional ceramic fiber liner available)
Durable textured powder coat finish
Optional blower and remote control available for all models
20 year limited warranty
INTERIOR
(Optional)
7
Optional Touch Remote
50 3/8 (1280)
48 (1219)48 1/4 (1200)
37 3/4 (959)40 3/16 (1021)
41(1041)
37(940)
34 1/8(867)
23 7/16(595)
27 3/4 (705)23 7/8 (607)
41(1041)
2 (51)
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
Stepped to accept drywallon all four corners
NOTE - Unit has a factory-installed vent sealcap and vent cover plate (see Figures 22 and23 on page 15) in each flue outlet. The vent
seal cap is not shown in this figure.
1/2(13)
DETAIL OFFINISHED
WALL BRACKET
GASINLET
CONTROLCOMPARTMENTACCESS PANEL
LibraST (See-Through)
TOP VIEW
FLUE SIDE VIEW
FRONT VIEW
ELECTRICALINLETS
8
DR
T40S
T (S
ee T
hro
ug
h)
DR
T40C
L (C
orn
er)
DR
T40
PF (
Pen
insu
la)
LibraCL (Corner-Left)
10 5/16(262)
12(303)
3(76)
6 7/8(174)
41(1041)
34 1/8(867)
1 (26)
25 9/16 (649)23 7/8 (607)
21 3/8 (543)
37 11/16 (957)
45 7/16 (1154)
11 3/8(289)
10(254)
21 3/8(543)
TOP VIEW
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
CONTROLCOMPARTMENTACCESS PANEL
NOTE - Unit has a factory-installed vent sealcap and vent cover plate (see Figures 22 and23 on page 15) in each flue outlet. The vent
seal cap is not shown in this figure.
FRONT VIEWLEFT SIDE VIEW RIGHT SIDE VIEW
1/2(13)
DETAIL OFFINISH WALL BRACKET
ELECTRICALINLETS
GASINLET
LibraPF (Peninsula)
10 5/16(262)
12(303)
3(76)
6 7/8(174)
41(1041)
34 1/8(867)
1 (26)
27 3/4 (705)
23 7/8 (607)
21 3/8 (543)
37 11/16 (957)
45 7/16 (1154)
11 3/8(289)
10(254)
21 3/8(543)
TOP VIEW
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
CONTROLCOMPARTMENTACCESS PANEL
ELECTRICALINLETS
GASiNLET
FRONT VIEWLEFT SIDE VIEW RIGHT SIDE VIEW
1/2(13)
DETAIL OFFINISH WALL BRACKET
LibraPF (Peninsula)
10 5/16(262)
12(303)
3(76)
6 7/8(174)
41(1041)
34 1/8(867)
1 (26)
27 3/4 (705)
23 7/8 (607)
21 3/8 (543)
37 11/16 (957)
45 7/16 (1154)
11 3/8(289)
10(254)
21 3/8(543)
TOP VIEW
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
CONTROLCOMPARTMENTACCESS PANEL
ELECTRICALINLETS
GASiNLET
FRONT VIEWLEFT SIDE VIEW RIGHT SIDE VIEW
1/2(13)
DETAIL OFFINISH WALL BRACKET
LibraPF (Peninsula)
10 5/16(262)
12(303)
3(76)
6 7/8(174)
41(1041)
34 1/8(867)
1 (26)
27 3/4 (705)
23 7/8 (607)
21 3/8 (543)
37 11/16 (957)
45 7/16 (1154)
11 3/8(289)
10(254)
21 3/8(543)
TOP VIEW
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
CONTROLCOMPARTMENTACCESS PANEL
ELECTRICALINLETS
GASiNLET
FRONT VIEWLEFT SIDE VIEW RIGHT SIDE VIEW
1/2(13)
DETAIL OFFINISH WALL BRACKET
LibraCL (Corner-Left)
10 5/16(262)
12(303)
3(76)
6 7/8(174)
41(1041)
34 1/8(867)
1 (26)
25 9/16 (649)23 7/8 (607)
21 3/8 (543)
37 11/16 (957)
45 7/16 (1154)
11 3/8(289)
10(254)
21 3/8(543)
TOP VIEW
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
CONTROLCOMPARTMENTACCESS PANEL
NOTE - Unit has a factory-installed vent sealcap and vent cover plate (see Figures 22 and23 on page 15) in each flue outlet. The vent
seal cap is not shown in this figure.
FRONT VIEWLEFT SIDE VIEW RIGHT SIDE VIEW
1/2(13)
DETAIL OFFINISH WALL BRACKET
ELECTRICALINLETS
GASINLET
TOP VIEW
TOP VIEW
TOP VIEW
FRONT VIEW
FRONT VIEW
FRONT VIEW
FLUE SIDE VIEW
FLUE SIDE VIEW
FLUE SIDE VIEW
50 3/8 (1280)
48 (1219)48 1/4 (1200)
37 3/4 (959)40 3/16 (1021)
41(1041)
37(940)
34 1/8(867)
23 7/16(595)
27 3/4 (705)23 7/8 (607)
41(1041)
2 (51)
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
Stepped to accept drywallon all four corners
NOTE - Unit has a factory-installed vent sealcap and vent cover plate (see Figures 22 and23 on page 15) in each flue outlet. The vent
seal cap is not shown in this figure.
1/2(13)
DETAIL OFFINISHED
WALL BRACKET
GASINLET
CONTROLCOMPARTMENTACCESS PANEL
LibraST (See-Through)
TOP VIEW
FLUE SIDE VIEW
FRONT VIEW
ELECTRICALINLETS
50 3/8 (1280)
48 (1219)48 1/4 (1200)
37 3/4 (959)40 3/16 (1021)
41(1041)
37(940)
34 1/8(867)
23 7/16(595)
27 3/4 (705)23 7/8 (607)
41(1041)
2 (51)
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
Stepped to accept drywallon all four corners
NOTE - Unit has a factory-installed vent sealcap and vent cover plate (see Figures 22 and23 on page 15) in each flue outlet. The vent
seal cap is not shown in this figure.
1/2(13)
DETAIL OFFINISHED
WALL BRACKET
GASINLET
CONTROLCOMPARTMENTACCESS PANEL
LibraST (See-Through)
TOP VIEW
FLUE SIDE VIEW
FRONT VIEW
ELECTRICALINLETS
TOP VIEW FRONT VIEW FLUE SIDE VIEW
LibraCL (Corner-Left)
10 5/16(262)
12(303)
3(76)
6 7/8(174)
41(1041)
34 1/8(867)
1 (26)
25 9/16 (649)23 7/8 (607)
21 3/8 (543)
37 11/16 (957)
45 7/16 (1154)
11 3/8(289)
10(254)
21 3/8(543)
TOP VIEW
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
CONTROLCOMPARTMENTACCESS PANEL
NOTE - Unit has a factory-installed vent sealcap and vent cover plate (see Figures 22 and23 on page 15) in each flue outlet. The vent
seal cap is not shown in this figure.
FRONT VIEWLEFT SIDE VIEW RIGHT SIDE VIEW
1/2(13)
DETAIL OFFINISH WALL BRACKET
ELECTRICALINLETS
GASINLET
50 3/8 (1280)
48 (1219)48 1/4 (1200)
37 3/4 (959)40 3/16 (1021)
41(1041)
37(940)
34 1/8(867)
23 7/16(595)
27 3/4 (705)23 7/8 (607)
41(1041)
2 (51)
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
Stepped to accept drywallon all four corners
NOTE - Unit has a factory-installed vent sealcap and vent cover plate (see Figures 22 and23 on page 15) in each flue outlet. The vent
seal cap is not shown in this figure.
1/2(13)
DETAIL OFFINISHED
WALL BRACKET
GASINLET
CONTROLCOMPARTMENTACCESS PANEL
LibraST (See-Through)
TOP VIEW
FLUE SIDE VIEW
FRONT VIEW
ELECTRICALINLETS
50 3/8 (1280)
48 (1219)48 1/4 (1200)
37 3/4 (959)40 3/16 (1021)
41(1041)
37(940)
34 1/8(867)
23 7/16(595)
27 3/4 (705)23 7/8 (607)
41(1041)
2 (51)
FRAMINGSPACERS(Top and
both sides)
FINISHED WALL BRACKET(Front and back edge of unit top)
Stepped to accept drywallon all four corners
NOTE - Unit has a factory-installed vent sealcap and vent cover plate (see Figures 22 and23 on page 15) in each flue outlet. The vent
seal cap is not shown in this figure.
1/2(13)
DETAIL OFFINISHED
WALL BRACKET
GASINLET
CONTROLCOMPARTMENTACCESS PANEL
LibraST (See-Through)
TOP VIEW
FLUE SIDE VIEW
FRONT VIEW
ELECTRICALINLETS
BR
T40S
T (S
ee T
hro
ug
h)
50 3/8 (1280)
48 (1219)48 1/4 (1200)
37 3/4 (959)40 3/16 (1021)
41(1041)
37(940)34 1/8
(867)23 7/16(595)
27 3/4 (705)23 7/8 (607)
41(1041)
2 (51)
FRAMINGSPACERS(Top and
both sides)
1/2(13)
DETAIL OFFINISHED
WALL BRACKET
GASINLET
CONTROLCOMPARTMENTACCESS PANEL
MarinST (See-Through)BRT40STTMN (See Through)
TOP VIEW
FLUE SIDE VIEW
FRONT VIEW
ELECTRICALINLETS
50 3/8 (1280)
48 (1219)48 1/4 (1200)
37 3/4 (959)40 3/16 (1021)
41(1041)
37(940)34 1/8
(867)23 7/16(595)
27 3/4 (705)23 7/8 (607)
41(1041)
2 (51)
FRAMINGSPACERS(Top and
both sides)
1/2(13)
DETAIL OFFINISHED
WALL BRACKET
GASINLET
CONTROLCOMPARTMENTACCESS PANEL
MarinST (See-Through)BRT40STTMN (See Through)
TOP VIEW
FLUE SIDE VIEW
FRONT VIEW
ELECTRICALINLETS
50 3/8 (1280)
48 (1219)48 1/4 (1200)
37 3/4 (959)40 3/16 (1021)
41(1041)
37(940)34 1/8
(867)23 7/16(595)
27 3/4 (705)23 7/8 (607)
41(1041)
2 (51)
FRAMINGSPACERS(Top and
both sides)
1/2(13)
DETAIL OFFINISHED
WALL BRACKET
GASINLET
CONTROLCOMPARTMENTACCESS PANEL
MarinST (See-Through)BRT40STTMN (See Through)
TOP VIEW
FLUE SIDE VIEW
FRONT VIEW
ELECTRICALINLETS
DRT40 SPECIFICATIONS (SEE INSTALLATION MANUAL FOR DETAILED FRAMING SPECIFICATIONS)
BRT40 SPECIFICATIONS (SEE INSTALLATION MANUAL FOR DETAILED FRAMING SPECIFICATIONS)
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
USES 6" B-VENT PIPE
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
9
IMPORTANT NOTES:As with any fireplace, this appliance is extremely hot during operation. Read and understand all operating instructions before using this appliance. For further information, consult your dealer.
Local conditions, such as elevation, wind, vent configuration and choice of fuel will affect overall appearance of the fire and heating performance. Performance can also vary with home design and insulation, climate, condition and type of fuel used, appliance location, burn rate, accessories chosen, chimney installation and how the appliance is operated.
Diagrams, illustrations and photographs are not to scale—consult installation instructions. Product designs, materials, dimensions, specifications, colors and prices are subject to change or discontinuance without notice.
DRT35 SPECIFICATIONS D
RT3
5ST
(See
Th
rou
gh
)D
RT3
5PF
(Pen
insu
la)
TOP VIEW FRONT VIEW FLUE SIDE VIEW
TOP VIEW FRONT VIEW FLUE SIDE VIEW
DRT35 MULTI-VIEW FIREPLACE EFFICIENCIES — Listed to ANSI Z21.88 as a gas fireplace heater
** Annual Fuel Utilization Efficiency (AFUE) is the recognized U.S. rating system for the total efficiency of heating products.
DRT40 MULTI-VIEW FIREPLACE EFFICIENCIES — Listed to ANSI Z21.88 as a gas fireplace heater
** Annual Fuel Utilization Efficiency (AFUE) is the recognized U.S. rating system for the total efficiency of heating products.
(SEE INSTALLATION MANUAL FOR DETAILED FRAMING SPECIFICATIONS)
MODEL FUEL BTU/HR AFUE** P4 / ENERGUIDE
DRT35ST DMN NG 23,000-30,000 68.8% 59.0%
DRT35ST DMP LP 22,000-28,000 70.3% 58.6%
DRT35ST DEN NG 30,000 74.8% 54.7%
DRT35PF DMN LP 23,000-30,000 69.2% 60.1%
DRT35PF DMP NG 22,000-28,000 69.7% 58.7%
DRT35PF TDEN LP 30,000 74.8% 54.7%
MODEL FUEL BTU/HR AFUE** P4 / ENERGUIDE
DRT40ST DMN NG 29,000-37,000 70.3 57.9%
DRT40ST DMP LP 27,000-34,000 69.8% 64.9%
DRT40ST TEN NG 37,000 68.2% 57.7%
DRT40PF DMN NG 29,000-37,000 69.1% 58.1%
DRT40PF DMP LP 27,000-34,000 69.8% 64.9%
DRT40PF DEN NG 37,000 68.2% 57.7%
DRT40CL DMN NG 24,000-31,000 67.5% 53.4%
DRT40CL DMP LP 22,000-28,000 69.0% 61.1%
DRT40CL DEN NG 31,000 68.2% 57.7%
DRT40CR DMN NG 24,000-31,000 67.5% 53.4%
DRT40CR DMP LP 22,000-28,000 69.0% 61.1%
DRT40CR DEN NG 31,000 68.2% 57.7%
11 (279)
6-1/4(159)
25-1/2 (648)
3-1/8 (79)
10-7/8 (264)
11 (279)
(16)5/8
37-1/16(941)
18-1/4(464)
1-1/4(44)
4-15/16(125)
25-1/2(648)
41-13/16 (1062)40-1/4 (1022)35-1/4 (895)
29 (737)32-5/8 (829)
11 (279)
6-1/4(159)
3-1/8 (79)
11 (279)
6-1/4(159)
25-1/2 (648)
3-1/8 (79)
10-7/8 (264)
11 (279)
(16)5/8
37-1/16(941)
18-1/4(464)
1-1/4(44)
4-15/16(125)
25-1/2(648)
41-13/16 (1062)40-1/4 (1022)35-1/4 (895)
29 (737)32-5/8 (829)
11 (279)
6-1/4(159)
3-1/8 (79)
11 (279)
6-1/4(159)
25-1/2 (648)
3-1/8 (79)
10-7/8 (264)
11 (279)
(16)5/8
37-1/16(941)
18-1/4(464)
1-1/4(44)
4-15/16(125)
25-1/2(648)
41-13/16 (1062)40-1/4 (1022)35-1/4 (895)
29 (737)32-5/8 (829)
11 (279)
6-1/4(159)
3-1/8 (79)
11 (279)
6-1/4(159)
25-1/2 (648)
3-1/8 (79)
10-7/8 (264)
11 (279)
(16)5/8
25-5/16 (643)22 (559)
15-3/4 (400)19-11/16 (500)
37-1/16(941)
18-1/4(465)
29-3/16(741)
37-1/16(941)
18-1/4(464)
1-1/4(44)
4-15/16(125)
25-1/2(648)
41-13/16 (1062)40-1/4 (1022)35-1/4 (895)
29 (737)32-5/8 (829)
11 (279)
6-1/4(159)
25-1/2 (648)
3-1/8 (79)
10-7/8 (264)
11 (279)
(16)5/8
25-5/16 (643)22 (559)
15-3/4 (400)19-11/16 (500)
37-1/16(941)
18-1/4(465)
29-3/16(741)
37-1/16(941)
18-1/4(464)
1-1/4(44)
4-15/16(125)
25-1/2(648)
41-13/16 (1062)40-1/4 (1022)35-1/4 (895)
29 (737)32-5/8 (829)
11 (279)
6-1/4(159)
25-1/2 (648)
3-1/8 (79)
10-7/8 (264)
11 (279)
(16)5/8
25-5/16 (643)22 (559)
15-3/4 (400)19-11/16 (500)
37-1/16(941)
18-1/4(465)
29-3/16(741)
37-1/16(941)
18-1/4(464)
1-1/4(44)
4-15/16(125)
25-1/2(648)
41-13/16 (1062)40-1/4 (1022)35-1/4 (895)
29 (737)32-5/8 (829)
MODEL FUEL BTU/HR
BRT40ST TMN NG 30,000-37,500
BRT40ST TMP LP 27,000-34,000
BRT40 MULTI-VIEW FIREPLACE EFFICIENCIES — Listed to ANSI Z21.50 as a decorative gas appliance
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
USES IHP SV 4.5" I.D. X 7.5" O.D. DIRECT VENT PIPE
© 2015 Innovative Hearth Products785631M 03/15
Visit us online
SuperiorFireplaces.us.com