OUR PRODUCT RANGE Info Are you uncertain about the type of lubricant you need for your vehicles and machines? Contact our technical service department, we’ll be pleased to help you choose the optimal product for you. Help Line +32 (0) 2 365 02 00 or send us a mail at [email protected]Motor oils S Synthetic and mineral oils, for light petrol up to heavy diesel engines S Two-stroke motor oil Transmission oils S Mineral and synthetic S Multi grade, API GL4 & GL5 S ATF oils Hydraulic liquids S Filtered Hydraulic oils (Nas 6) S Zinc-free and zinc-containing hydraulic oils S Biodegradable oils S Non-flammable hydraulic liquids Specialities for the industry S Compressor oil S Compressed air lubrication S General lubrication S Transformer oil S Gearbox oil S Thermal oil S White oils Sprays S Silicone sprays S Sprocket & gear wheels S Anticorrosion S Tapping oil S Brake cleaner S Penetrating oil S White grease S Food-grade quality S PTFE Winter products S Antifreeze S Coolants S windscreen Metalworking fluids S Water miscible and neat oils for all ferrous and non-ferrous metals S Grinding fluids S Rust preventive oils S Vanishing oils S Spray oils S Slide way oils Food-grade lubricants S Lubricants for the food industry (USDA H1/NSF) Greases S Greases for bearings S Multi-purpose greases S Greases with PTFE, graphite and MoS2 additives S Biodegradable greases S Greases for high temperatures S Specialities High quality range for motorcycles S Oils for motor, transmission, fork and chains Equipments S Oil tanks S Grease pumps S Skimmers S Refractometers S Filtering devices S Dosage pumps S Hose reels S Spill-trays S Oil cans S Degreasing tanks Agriculture & Forestry S Chain saw oils S Biodegradable oils and greases S 2-stroke and 4-stroke oils Cleaning products S Degreasing agents S Hand soaps S Oil absorbing granulates NEAT CUTTING OILS UNIL LUBRICANTS SINCE 1903 BELGIUM Bergensesteenweg 713 1600 Sint-Pieters-Leeuw Tel. +32 (0)2 365 02 00 Fax +32 (0)02 360 01 12 [email protected][email protected]NETHERLANDS Tel. +31 (0)72 744 00 33 Fax +31 (0)72 744 00 34 [email protected][email protected]www.unil.com ISO 9001 - ISO 14001 Certified
Transcript
OUR PRODUCT RANGE
Info Are you uncertain about the type of lubricant you need for your vehicles and machines? Contact our technical service department, we’ll be pleased to help you choose the optimal product for you.
Help Line +32 (0) 2 365 02 00 or send us a mail at [email protected]
Motor oilsSSynthetic and mineral oils, for
light petrol up to heavy diesel engines
STwo-stroke motor oil
Transmission oilsSMineral and synthetic SMulti grade, API GL4 & GL5 SATF oils
Metalworking fluidsSWater miscible and neat oils for
all ferrous and non-ferrous metalsSGrinding fluids SRust preventive oils SVanishing oils SSpray oils SSlide way oils
Food-grade lubricantsSLubricants for the food industry
(USDA H1/NSF)
GreasesSGreases for bearings SMulti-purpose greases SGreases with PTFE, graphite and MoS2 additives SBiodegradable greases SGreases for high temperatures SSpecialities
High quality range for motorcyclesSOils for motor, transmission,
General machining process oil for non-ferrous metals (e.g.. mag-nesium) up to medium hardened steel. Also suitable for honing.
Thin cutting fluid for all machining operations on steel, e.g. grind-ing of gears, turning, cutting, gear cutting, milling, wire drawing...
Machining of brass and mild steel
General machining applications on steel (e.g. stainless steel)
Machining on steel and aluminium, especially for milling operations.
General machining operations on aluminium.
General machining operations on steel and aluminium.
Cold forming of steel and steel alloys, forming, blanking, stamping, cut-ting of profiles. Also suitable for electrical discharge machining (EDM)Deep drilling, tapping and many difficult types of machining on high alloyed steel and stainless steel e.g. broaching.
Cutting, turning and milling operations on hardened steel and stainless steel.
Cutting, turning and milling operations on brass, mild and medium hardened steel.
Multipurpose cutting fluid for mild up to hard steel
Heavy machining operations at moderate and low speeds.
Tapping and drilling (manually). The product is water washable after the operations.
Sawing (and cold forming) under nebulizing.
General machining oil for non-ferrous metals (e.g.. magnesium) to semi-hard steels. Also suitable for honing.
Multipurpose cutting fluid based on synthetic ester andextreme pressure additives. Not suitable for yellow metals.
Synthetic cutting fluid especially developed for cutting and saw-ing aluminium.
Punching, bending, deep drawing, stamping, profiling, press cutting.
Deep drawing, profiling, bending, press cutting and all kind of difficult deformations.
All kind of deformation with evanescent oil.
All kind of deformation with evanescent oil.
All kind of deformation with evanescent oil.
All kind of deformation with evanescent oil.
MA
CH
ININ
G
PU
NC
ING
DE
FOR
MIN
G
VO
LATI
LITY
GR
IND
ING
SP
RA
YA
BLE
EP
SS
SS
SS
SS
SS
S
S
SSS
SSS
S
SS
S
SSS
NF/SS/MS
SS/MS
NF/SS
SS/MS/HS
SS tot GS (+al)
NF
SS tot GS
NF/SS/MS
SS/MS/HS
SS/MS/HS
NF/SS/MS
SS/MS/HS
SS tot GS
SS tot GS
NF/SS/MS
NF/SS/MS
SS tot GS (+Al)
SS/MS
SS tot GS
SS/MS/HS
NF/SS/MS
NF/SS/MS
SS/MS/HS
Good lubricity and excellent cooling thanks to its low viscosity.
Good chip removal. Excellent cooling properties thanks to its low viscosity.
Good cooling properties.
Strong EP-product for hard materials such as stainless steel.
Synthetic esters. Biodegradable.
Not suited for copper alloys.
Vegetable. Excellent lubricity. Biodegradable.
Vegetable. Excellent lubricity. Biodegradable. Not suited for copper alloys.
High sedimentation ability and remarkable oxidation stability.
Good chip removal. Excellent cooling thanks to its low viscosity.
Excellent surface finishing and enhanced tool life.
Excellent lubricity, extreme pressure and antiwear characteristics.
Multipurpose, clear and odourless cutting fluid.High viscosity and lubricity.
High stickiness. Water washable.
Very low viscosity. Harmless for paint and polymers.
Good lubricity and excellent cooling properties.
Synthetic esters. Biodegradable. Not suitable for copper alloys.
Non staining
Sprayable. Prevent sticking of the machined material.
Strong EP-characteristics. High viscosity.
Dry protective film. Fast evaporation.
EP-characteristics and good lubricity. Moderate evaporation.
EP and lubricity. Slow evaporation.
Good lubricity. Fast evaporation.
Product name Visco@40°C(cSt)
Difficultygrade
Main characteristics Materials Properties
Codes: NF = non-Ferro metal / SS = soft steel / MS = medium steel / HS = hard steel / GS = alloyed steel and other hard materials (e.g.. Titanium) AM = with extra antimist properties EP level S= Moderate SS= Strong SSS= Very strong
