+ All Categories
Home > Documents > Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Date post: 28-Mar-2015
Category:
Upload: ashlynn-waites
View: 216 times
Download: 2 times
Share this document with a friend
Popular Tags:
26
Out with the old...In with the new! Parts of the Husqvarna Emerald 118
Transcript
Page 1: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Out with the old...In with the new!

Parts of the Husqvarna Emerald 118

Page 2: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#21 Power Switch

#21

Page 3: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Power Switch: Turns the machine on and off. Do not put your fingers near the needle while

the machine is on!

Page 4: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#1 Bobbin Case#2 Needle Plate

#1#2

Page 5: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Bobbin Case: Where the bobbin is locatedNeedle Plate: Houses the inner motor. Labeled

with the seam allowance measurements (10 = 3/8” and 15 = 5/8”)

Page 6: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#3 Presser Foot#4 Needle

#8 Presser Foot Lifter

#4#3

#8

Page 7: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Presser foot: holds the fabric downNeedle: Brings thread through fabric

Presser foot lifter: Lifts presser foot up and down

Page 8: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#5 Light#6 Thread Cutter#7 Pressure Dial

#5

#7

#6

Page 9: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Light: Shines light on the projectThread Cutter: Cuts thread (but use scissors instead!)

Pressure Dial: Controls how firmly the presser foot holds fabric down

Page 10: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#9 Needle Up/Down

#9

Page 11: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Needle Up/Down: Moves the needle up or down automatically to help pivot

Page 12: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#10 Take Up Lever#11 Thread Guide

#10 #11

Page 13: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Take Up Lever: Keeps the thread from tanglingThread Guides: Holds thread in the correct position

Page 14: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#12 Speed Control

#12

Page 15: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Speed Control: Slows down or speeds up the pace of sewing

Page 16: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#13 Spool Pin#14 Spool Cap

#14#13

Page 17: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Spool Pin: Holds the spool – thread comes from underneath

Spool Cap: Holds the spool in place

Page 18: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#15 Stitch Width Dial#15

Page 19: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Stitch Width Dial: Changes width of zig zag stitch (choose #5)

Page 20: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#16 Bobbin Winder#17 Hand Wheel

#16

#17

Page 21: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Bobbin Winder: Winds thread onto the bobbinHand Wheel: Manually moves the needle, take up

lever and feed dogs. Always turn towards you!

Page 22: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#18 Stitch Selector#19 Stitch Length Dial

#18

#19

Page 23: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Stitch Selector: Choose the stitch you would like (orange choices at top)

Stitch Length Dial: Controls length of stitches (choose #2)

Page 24: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

#20 Reverse Stitch Lever

#20

Page 25: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Reverse Stitch Lever: Hold down to stitch backwards and backstitch to reinforce stitches

Page 26: Out with the old...In with the new! Parts of the Husqvarna Emerald 118.

Now what do you do with all of this information?Thread the machine and sew a seam...


Recommended