API grades Casing and TubingSour Service Casing and TubingHigh Collapse Casing and TubingHigh strength Casing and Tubing
CRA Casing and TubingTitanium Casing and Tubing
13 Chrome Casing and Tubing
Pangang Group Chengdu Steel & Vanadium Co., Ltd.
Outside Diameter
inch (mm)NUElb/ft
EUElb/ft
Plain Endlb/ft
Wall Thickness
inch (mm)
Inside Diameter
inch
Drift
inch
2-3/8 (60.32)
4.605.806.607.35
4.705.95—
7.45
4.445.766.567.32
0.190 (4.83)0.254 (6.45)0.295 (7.49)0.336 (8.53)
1.9951.8671.7851.703
1.9011.7731.6911.609
2-7/8 (73.02)
6.407.808.609.3510.5011.50
6.507.908.709.45——
6.177.678.459.2110.4011.45
0.217 (5.51)0.276 (7.01)0.308 (7.82)0.340 (8.64)0.392 (9.96)
0.440 (11.18)
2.4412.3232.2592.1952.0911.995
2.3472.2292.1652.1011.9971.901
3-1/2 (88.90)
7.709.2010.2012.7014.3015.5017.00
—9.30—
12.95———
7.588.819.9212.5314.1115.3916.83
0.216 (5.49)0.254 (6.45)0.289 (7.34)0.375 (9.52)
0.430 (10.92) 0.476 (12.09) 0.530 (13.46)
3.0682.9922.9222.7502.6402.5482.440
2.9432.8672.7972.6252.5152.4232.315
4 (101.60)
9.5010.7013.2016.1018.9022.20
—11.00
————
9.1210.4712.9515.9018.7122.11
0.226 (5.74)0.262 (6.65)0.330 (8.38)
0.415 (10.54) 0.500 (12.70) 0.610 (15.49)
3.5483.4763.3401.1703.0002.780
3.4233.3513.2153.0452.8752.655
4-1/2 (114.30)
12.6015.2017.0018.9021.5023.7026.10
12.75——————
12.2515.0016.7718.7121.3823.5926.06
0.271 (6.88)0.337 (8.56)0.380 (9.65)
0.430 (10.92) 0.500 (12.70) 0.560 (14.22) 0.630 (16.00)
3.9583.8263.7403.6403.5003.3803.240
3.8333.7013.6153.5153.3753.2553.115
Nominal weight
Threads & Coupling
Available Tubing Sizes
Outside Diameter
inch (mm)
Threads & Coupling
lb/ft
Plain End
lb/ft
Wall Thickness
inch (mm)
Inside Diameter
inch
Drift
inch
Special Drift
inch
4-1/2 (114.30)
9.5010.5011.6013.5015.10
9.4110.2411.3613.0515.00
0.217 (5.51)0.276 (7.01)0.308 (7.82)0.340 (8.64)0.392 (9.96)
4.0904.0524.0003.9203.826
3.9653.9273.8753.7953.701
5 (127.00)
11.5013.0015.0018.0021.4023.2024.10
11.2412.8414.8817.9521.3223.1124.05
0.220 (5.59)0.253 (6.43)0.296 (7.52)0.362 (9.19)
0.437 (11.10) 0.478 (12.14) 0.500 (12.70)
4.5604.4944.4084.2764.1264.0444.000
4.4354.3694.2834.1514.0013.9193.875
5-1/2 (139.70)
14.0015.5017.0020.0023.0026.8029.7032.6035.3038.0040.5043.10
13.7115.3616.8919.8322.5626.7229.6732.5735.3538.0840.6943.26
0.244 (6.20)0.275 (6.98)0.304 (7.72)0.361 (9.17)
0.415 (10.54) 0.500 (12.70) 0.562 (14.27) 0.625 (15.88) 0.687 (17.45) 0.750 (19.05) 0.612 (20.62) 0.875 (22.22)
5.0124.9504.8924.7784.6704.5004.3764.2504.1264.0003.8763.750
4.8874.8254.7674.6534.5454.3754.2514.1254.0013.8753.7513.625
6-5/8 (168.28)
20.0024.0028.0032.00
19.5123.6027.6731.23
0.288 (7.32)0.352 (8.94)
0.417 (10.59) 0.475 (12.06)
6.0495.9215.7915.675
5.9245.7965.6665.550
7 (177.80)
17.0020.0023.0026.0029.0032.00
16.7219.5622.6525.6928.7531.70
0.231 (5.87)0.272 (6.91)0.317 (8.05)0.362 (9.19)
0.408 (10.36) 0.453 (11.51)
6.5386.4566.3666.2766.1846.094
6.4136.3316.2416.1516.0595.969
6.250
6.000
7-5/8 (193.68) 24.0026.4029.7033.7039.0042.8045.3047.1051.2055.30
23.4925.5929.0633.0738.0842.4344.7146.7750.9555.12
0.300 (7.62)0.328 (8.33)0.375 (9.52) 0.430 (10.92) 0.500 (12.70) 0.562 (14.27) 0.595 (15.11) 0.625 (15.88) 0.687 (17.45) 0.750 (19.05)
7.0256.9696.8756.7656.6256.5016.4356.3756.2516.125
6.9006.8446.7506.6406.5006.3766.3106.2506.1266.000
7-3/4 (196.85) 46.10 45.51 0.595 (15.11) 6.560 6.435 6.500
8-5/8 (219.08)
24.0028.0032.0036.0040.0044.0049.00
23.6027.0431.1335.1739.3343.4348.04
0.264 (6.71)0.304 (7.72)0.352 (8.94) 0.400 (10.16) 0.450 (11.43) 0.500 (12.70) 0.557 (14.15)
8.0978.0177.9217.8257.7257.6257.511
7.9727.8927.7967.7007.6007.5007.386
7.875
7.625
9-5/8 (244.48) 32.3036.0040.0043.5047.0053.5058.4059.4064.9070.3075.60
31.0634.8938.9742.7346.1852.9057.4458.7064.3269.7675.21
0.312 (7.92)0.352 (8.94) 0.395 (10.03) 0.435 (11.05) 0.472 (11.99) 0.545 (13.84) 0.595 (15.11) 0.609 (15.47) 0.672 (17.07) 0.734 (18.64) 0.797 (20.24)
9.0018.9218.8358.7558.6818.5358.4358.4078.2818.1578.031
8.8458.7658.6798.5998.5258.3798.2798.2518.1258.0017.875
8.750
8.5008.375
Nominal weight
Available Casing SizesMartensitic Stainless Steel GradesName Y.S.range (ksi-MPa) U.T.S. min. (ksi-MPa) HRC value
CS13CR-80CS13CR-85CS13CR-95
CS13CR-95EM (1&2)CS13CR-110EM (1&2)
80(552)-95(655)85(586)-100(690)95(655)-110(758)95(655)-110(758)110(758)-125(862)
95(655)100(690)105(724)105(724)120(828)
≤23≤24≤26≤28≤32
Chemical CompositionStandard Chrome Metallurgy
C Si Mn Cr Ni Cu Mo P S
CS13CR-80 0.15/0.22 ≤1.00 0.25/1.00 12.0/14.0 ≤0.5 ≤0.25 / ≤0.020 ≤0.01
CS13CR-85 0.15/0.22 ≤1.00 0.25/1.00 12.0/14.0 ≤0.5 ≤0.25 / ≤0.020 ≤0.01
CS13CR-95 0.15/0.22 ≤1.00 0.25/1.00 12.0/14.0 ≤0.5 ≤0.25 / ≤0.020 ≤0.01
Enhanced Metallurgy
CS13CR-95EM1 ≤0.05 0.20/0.50 0.30/0.60 12.0/14.0 3.5/4.5 ≤0.25 0.5/1.2 ≤0.020 ≤0.01
CS13CR-110EM1 ≤0.05 0.20/0.50 0.30/0.60 12.0/14.0 3.5/4.5 ≤0.25 0.5/1.2 ≤0.020 ≤0.01
CS13CR-95EM2 ≤0.05 0.20/0.50 0.30/0.60 12.0/14.0 4.5/5.5 ≤0.25 1.5/2.5 ≤0.020 ≤0.01
CS13CR-110EM2 ≤0.05 0.20/0.50 0.30/0.60 12.0/14.0 4.5/5.5 ≤0.25 1.5/2.5 ≤0.020 ≤0.01
Data provided for information purposes only. Please consult with an engineer for appropriate use of material. Emerald Metals and CSST assumes no liability regarding the use of this information and no warranty is expressed or implied.
International SalesEmerald Metals
14340 Torrey Chase Blvd., Suite 370Houston, TX 77014
Phone: (713) 591-1000Fax: (281) 895-6618
Email: [email protected]
China SalesSichuan Huagong Petroleum Steel Pipe Co., Ltd.
North Zone, Hi-Tech Industry, Development District Golden Bull RegionChengdu City, Sichuan,
People’s Republic of ChinaPostcode: 610083
Phone: 0086-28-83586388Email: [email protected]
hgppc.com
• CSST, Pangang Group Chengdu Steel & Vanadium Co., Ltd. TQC since 1979.• API 5CT Certification 5CT-0248 since 1990.• GB/T10300 “Quality management and quality assurance standards, making and implementing “quality system documents” since 1990.• GB/T19002-ISO9002-quality assurance model for production, installation and service since 1994.• ISO9002 quality system certification by China Certification Committee for Quality Mark-Quality in 1995.• ISO9001 quality management system certification by China Certification Committee for Quality Mark-Quality in 2004.
CS13CR-85 External Surface 500
CS13CR-85 Middle Section 500
CS13CR-85 Internal Surface 500
CS13CR-110EM2 External Surface 500 µM
CS13CR-110EM2 Middle Section 500 µM
CS13CR-110EM2 Internal Surface 500 µM
Micrographs
v 2014.1
