Date post: | 28-Mar-2016 |
Category: |
Documents |
Upload: | exclusive-lighting-solutions |
View: | 230 times |
Download: | 3 times |
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
048-220a 1 07.18.08
Tabletop KeypadsRF KeypadsHomeWorks®
P R E L I M I N A R Y
HRt-10S2Rl-SW HRt-5S2Rl-SW
HomeWorks RF Tabletop Keypads with seeTouch® Style Buttons
HomeWorks Rf tabletop Keypads with seeTouch style buttons provide homeowners with a simple and elegant way to control lights, shades, motorized screens, and many other devices. the Rf tabletop Keypads communicate with the system through radio frequency (Rf) and have indicator leDs that provide real-time status.
custom engraved, large backlit buttons are easy to read and provide easy location of the tabletop Keypad in a dark room.
the Rf tabletop Keypads with seeTouch style but-tons are available in 5-, 10-, or 15-button versions with Raise / lower.
Features
• Large backlit buttons are easy to locate and press.• Indicator LEDs provide real-time status.• Choice of two power sources: Plug-in DC adapter;
cordless, using aaa batteries.• Configurable backlight intensity for both battery and
adapter power sources.• Configurable cordless operation: – Single button press to “wake up” and activate
selected button – Single button press to “wake up” and show status
of lighting
• One engraved button kit certificate included.
Model Numbers
Large Button Tabletop RF Keypads HRT-5S2RL-XX 5 buttons, Raise/lower, and all
on/all off
HRT-10S2RL-XX 10 buttons, Raise/lower, and all on/all off
HRT-15S2RL-XX 15 buttons, Raise/lower, and all on/all off
Engraved Faceplate Kits LFK-T5RL-XX-E 5 button engraved faceplate
LFK-T10RL-XX-E 10 button engraved faceplate
LFK-T15RL-XX-E 15 button engraved faceplate
Engraved Button Kits LBK-T5RL-XX-E 5 button engraved button Kit
LBK-T10RL-XX-E 10 button engraved button Kit
LBK-T15RL-XX-E 15 button engraved button Kit
“XX” in the model number represents color / finish code.
Prepaid Engraving CertificateDO NOT DISCARD
Certificado de Grabado Pre-Pagado
Sirve para cambiar por un juego de botón grabadoECA100393
Redeemable for one engraved button kit
POR FAVOR NO DESECHAR
HRt-15S2Rl-SW
leDs
backlit buttons
all onall off
Raise/lower buttons
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
048-220a 2 07.18.08
Tabletop KeypadsRF KeypadsHomeWorks®
P R E L I M I N A R Y
Satin brass Sb
antique brass Qb
clear anodized aluminum cla
black anodized aluminum bla
brass anodized aluminum bRa
Satin nickel Sn
bright brass bb
antique bronze QZ
bright nickel bn
bright chrome bc
Satin chrome Sc
Colors and Finishes
Keypads and Engraved Button Kits
Satin Finishes
midnight mn
midnight mn
Snow SW
Snow SW
Engraved Faceplate Kits
Satin Finishes
Engraved Faceplate Kits
Metal FinishesWhen ordering metal faceplates, it is recommended to use a midnight (mn) keypad.
• Due to printing limitations, col-ors and finishes shown cannot be guaranteed to perfectly match actual product colors.
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
048-220a 3 07.18.08
Tabletop KeypadsRF KeypadsHomeWorks®
P R E L I M I N A R Y
SpecificationsStandards
• UL Listed (Adapter) for U.S. and canada.
• FCC Approved. Complies with the limits for a class b digital device, persuant to Part 15 of the fcc Rules.
• NOM Certified (Adapter).
Power
• DC Adapter Power: Input Power: 120 V 60 Hz.
Output Power: 9 V 300 ma.• Use only the adapter provided
by lutron with the Keypad.• Battery Power: 2 each 1.5 V
“aaa” alkaline batteries.
Key Design Features
• Green leDs for status and button / engraving backlighting.
• Choice of two power sources (plug-in adapter or battery) for maximum flexibility to conve-niently locate the Keypad.
• Tested to withstand electrostatic discharge without damage or memory loss, in accordance with iec 6100-4-2.
• Tested to withstand surge volt-ages without damage or memory loss, in accordance with ieee C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
• Power failure: should power be interrupted, the lights will return to the level set prior to the interruption. the large button tabletop Rf Keypad will con-tinue to identify which lighting zones are active after power is restored.
• Configurable backlight intensity: - Separate backlight intensity
for battery and adapter power sources
- Select between High, medium, low, or off
• Configurable “Wake Up” for cordless operation:
- “Wake up and activate”—Single button press will “wake up” and activate selected but-ton
- “Wake up only”—Single button press will “wake up” and show status of lighting
System Communications and Capacity
• RF Keypads communicate with the HomeWorks system through radio frequency (Rf).
• Each HomeWorks P5 Processor is capable of controlling up to 32 Rf Keypads.
• RF Tabletop Keypads must be located within 30 feet (9 m) of a Hybrid Repeater or an Rf Processor. multiple Hybrid Repeaters may be necessary to provide adequate coverage.
Environment
• Ambient operating temperature: 0 °c to 40 °c, 32 °f to 104 °f
• 0-90% humidity, non-condens-ing.
• Indoor use only.
Warranty
• 8-year Limited Warranty. See www.lutron.com/resiinfo for details.
Optional Wall Mounting
attach mounting bracket to wall using the supplied screws and wall anchors.
if using the Dc adapter power supply, wrap excess power sup-ply cord around the cord holder. align Rf tabletop Keypad and snap onto mounting bracket.
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
048-220a 4 07.18.08
Tabletop KeypadsRF KeypadsHomeWorks®
P R E L I M I N A R Y
Front View Side View
Top View
Dimensions
39⁄16 (90.7)3/4
(18.3)
31⁄4 (82.1)
Note: All dimensions are in inches (millimeters).
1 (25.4)
adapter Jack
Mounting Bracket Front View
UP
5/8 (15) 2 (50.8)
31⁄4 (81.3)
13/16 (21)
215⁄16 (73.9)
25⁄16 (59)
1 (25.4)
R = 1/8 (2.3)
R = 3/16 (4.8)
3/8 (10)
Mounting Bracket Side View
3/8 (9.4)
5/8 (15)
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
048-220a 5 07.18.08
Tabletop KeypadsRF KeypadsHomeWorks®
P R E L I M I N A R Y
System Communication Notes
• RF Tabletop Keypads must be located within 30 feet (9 m) of a Hybrid Repeater or an Rf Processor. multiple Hybrid Repeaters may be necessary to provide adequate coverage.
• Additional Hybrid Repeaters must be within 60 ft. of the Rf Processor or another Hybrid Repeater.
• RF Tabletop Keypads will not function until they are addressed and programmed. See the HomeWorks software online help.
System Overview
Rf Dimmer
30 feet (9 m) maximum
Rf Processor (or 4 or 8 Series Processor with Hybrid Repeater)
Rf Keypad
Home A: 2500 sq. ft. (232 m2) or less - all RF devices within 30 ft. (9 m) of RF Processor
Rf tabletop
Keypad
Rf Dimmer
30 feet (9 m) maximum
Rf Processor
Rf Keypad
Home B: 2500 sq. ft. (232 m2) or greater - some RF devices more than 30 ft. (9 m) from RF Processor
Rf Signal Repeater
30 feet (9 m) maximum
60 feet (18 m)
maximum
between Rf
Processors and
Hybrid Repeaters,
or between Hybrid
Repeaters
Rf tabletop Keypad