P REYNOLDS...With Shelbourne Reynolds equipment, there’s no question of compromising machine...

R E Y N O L D S

D I E TF E E D E R S

PO

WE

RM

IX

ABOUT SHELBOURNE REYNOLDS........................................................................................................3

HISTORY.....................................................................................................................................................4

WHAT MAKES POWERMIX UNIQUE?....................................................................................................5

POWERMIX PRO POPULAR (9-15 cu m)..............................................................................................6-9

POWERMIX PRO EXPRESS - SINGLE AUGER (9-15 cu m).............................................................10-13

POWERMIX PRO EXPRESS - TWIN AUGER SINGLE AXLE (16-19 cu m)......................................14-17

POWERMIX PRO EXPRESS - TWIN AUGER TANDEM AXLE (16-25 cu m)...................................18-19

POWERMIX PLUS - COMPACT (16-20 cu m)...................................................................................20-23

POWERMIX PLUS - COMPACT (16-22 cu m)...................................................................................24-25

POWERMIX PLUS - WIDE BODY (22-30 cu m)................................................................................26-29

POWERMIX BIO STATIC....................................................................................................................30-31

POWERMIX TYRE OPTIONS............................................................................................................32-33

POWERMIX SCALE & HYDRAULIC CONTROL OPTIONS..................................................................34

POWERMIX AUGER SPEEDS.................................................................................................................35

INDEX PAGE

C O N T E N T S

2 C O N T E N T S

3

Today, we are located on the same site in Stanton, near Bury St Edmunds, Suffolk, where we were established – but

our business continues to grow. Our factory now covers over 12,000 sq m of the two hectare premises on which we

are based, and employs 150 people.

Here, we use the latest design software to create the machines our markets demand, and utilise some of the most

sophisticated manufacturing equipment available to produce not only Powermix diet feeders, but also Shelbourne

hedge/verge trimmers, Powerspread manure spreaders and a host of other arable, livestock and groundcare machinery.

Our manufacturing technology includes CNC machining centres, laser steel cutting machines and one of the UK's

largest powder coat paint facilities. All of this means we are able to create in-house, to extremely high standards, a

large proportion of the components required for our equipment, using processes including machining and gear

cutting to manufacture specific drives for specific applications.

With Shelbourne Reynolds equipment, there’s no question of compromising machine performance or longevity by

using lower spec cheaper components. That means our dealers and customers benefit from knowing that we put

our name to every key component of our equipment.

A

C O N T E N T S

OVER FOUR DECADES OFFARM MACHINERYFOUNDED IN 1972, SHELBOURNE REYNOLDS HAS BEEN A FIXTURE INAGRICULTURAL EQUIPMENT MANUFACTURING EVER SINCE.

A B O U T S H E L B O U R N E R E Y N O L D S 3

INDEX PAGE

4 H I S T O R Y

A PROVEN HISTORY INFEEDER PRODUCTION

5

Our first Powermix models were introduced in 1994.

Since then, our focus has always been on the bale

processing capabilities, positive mixing action

and low horsepower requirements of auger-

based machines.

But as farms have expanded and herd sizes have

grown, our engineers have kept pace by designing

new, higher capacity models with faster mixing and

feed-out times. Today, the Powermix range spans models

with capacities from 9-46 cubic metres, with augers and feed-out systems built to match specific capacity sectors.

Read on to find out how the characteristics we design into our feeders can help you to get more from your feed,

no matter what the size of your enterprise.

EXPERIENCE IS AN ESSENTIAL ELEMENT OF RELIABLE DESIGN, AND WITH AHISTORY OF DIET FEEDER PRODUCTION STRETCHING BACK MORE THAN 25YEARS, YOU CAN BE SURE SHELBOURNE REYNOLDS HAS JUST THAT. P

H I S T O R Y

AUGER DESIGN

FEED-OUT OPTIONS

A P

W H A T M A K E S P O W E R M I X U N I Q U E ? 5

O

POWERMIX PROPOPULARHYDRAULICSIDE DOOR

Suited to on-floor or shallow trough systems

POWERMIX PRO EXPRESSFIXED FRONT CONVEYOR

Variable-speed conveyor belt suited to

feeding to the left or right

POWERMIX PRO EXPRESSELEVATING FRONT CONVEYOR

Variable speed conveyor belt for feeding

to the left or right into raised troughs

STANDARD STEPPED AUGERFitted to all Powermix Pro models

Fitted to Powemix Plus (Compact) models

SMOOTH SCROLLED AUGER

Design offers greater wear resistanceFeatures replaceable wear pads

Fitted to Powemix Plus (Wide) models

HEAVY DUTY STEPPED AUGER

15mm S500 auger flight15mm stainless steel edgingReplaceable wear pads

Our entry-level line, the Powermix Pro Popular, comprises of four models and features a simple hydraulic right

front corner feed out door suitable for floor feeding or low level troughs. An optional rear left corner door is

available to feed out on both sides.

BIG IN FEATURES.

POWERMIX POPULAR9, 11, 13 & 15m Single Auger - Side Discharge3

6 P O W E R M I X P O P U L A R 7

THE RANGE VOLUME AXLE SPEC TYRE SPECPOWERMIX PRO POPULAR 9 9m SINGLE FIXED 385/55 R19.5

POWERMIX PRO POPULAR 11 11m SINGLE FIXED 385/55 R19.5



3

3

3

3

Heavy DutyPlanetary Gearbox

385/55 R19.5Tyres

Three LoadCells

LED Lights

HydraulicCorner Door

AdjustableDrawbar

FullChassis

KEY FEATURES

O

P O W E R M I X P O P U L A R P O W E R M I X P O P U L A R 7

T 9m SINGLE FIXED 385/55 R19.5

P 11m SINGLE FIXED 385/55 R19.5



3

Optional Left RearCorner HydraulicDoor

AdjustableCornerKnives

Three-PositionAdjustableKnives

Multi-PositionScale Display

Three Load Cells

RubberStraw Ring

S500 Grade8mm Tub

Walls

Three FeedOut Legs

Front RightCorner Door

Flat-Sided Tub

6mm Hardox Lower SidewallLining (14mm Total)

OPTIONS

STANDARD FEATURES 9M 11M 13M 15M

333 3

9

STANDARD FEATURES & OPTIONS

POWERMIX POPULAR9-15m 3 Single Auger - Side Discharge

8 P O W E R M I X P O P U L A R

CAPACITY / LEVEL 4500 kg* 5500 kg*VOLUME / LEVEL 9m 11mTYRE SIZE 385/55R19.5 385/55R19.5PTO SPEED 540 rpm 540 rpmHP REQUIRED 85 90 UNLADEN WEIGHT 3780 kg 4040 kg DOOR CONFIGURATION SINGLE RIGHT FRONT CORNER DOOR DOOR OPERATION HYDRAULIC HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDRUBBER STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 3 3NUMBER OF AUGERS 1 1NUMBER OF BLADES 7 7AUGER MAGNET STD STD STD STD

LH REAR CORNER DOOR

(DIRECT COUPLED HYD)

MANUAL VALVE HYD CONTROL

DG400 BASIC SCALE SYSTEM DG600 PROG. SCALE SYSTEM

DG REMOTE ZERO

DG GPRS DATA TRANSFER KIT

BATTERY PACK FOR SCALE

TWO SPEED GEARBOX

WIDE ANGLE PTO

425/40 R17 TYRE

TUB RISER KIT (INC 385/65R22.5

SUPER SINGLES)

TUNGSTEN BLADES

6500 kg* 7500 kg* 13m 15m 385/55R19.5 385/55R19.5 540 rpm 540 rpm 100 120 4205 kg 4365 kg HYDRAULIC HYDRAULIC STD STD STD STD STD STD STD STD 3 3 1 1 10 11

1 2458 mm 2600 mm 740 mm 330 mm 4715 mm 2815 mm 3105 mm

1

* DEPENDING UPON FEED DM%

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT N/A N/A

DIMENSIONS

P O W E M I X P O P U L A R 9

S

9-15m 3 Single Auger - Side Discharge

8 P O W E R M I X P O P U L A R

CAPACITY / LEVEL 4500 kg* 5500 kg*VOLUME / LEVEL 9m 11mTYRE SIZE 385/55R19.5 385/55R19.5PTO SPEED 540 rpm 540 rpmHP REQUIRED 85 90 UNLADEN WEIGHT 3780 kg 4040 kg DOOR CONFIGURATION SINGLE RIGHT FRONT CORNER DOOR DOOR OPERATION HYDRAULIC HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDRUBBER STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 3 3NUMBER OF AUGERS 1 1NUMBER OF BLADES 7 7AUGER MAGNET STD STD STD STD

LH REAR CORNER DOOR

(DIRECT COUPLED HYD)


DG400 BASIC SCALE SYSTEM DG600 PROG. SCALE SYSTEM

DG REMOTE ZERO



TWO SPEED GEARBOX

WIDE ANGLE PTO

425/40 R17 TYRE

TUB RISER KIT (INC 385/65R22.5

SUPER SINGLES)

TUNGSTEN BLADES

6500 kg* 7500 kg* 13m 15m 385/55R19.5 385/55R19.5 540 rpm 540 rpm 100 120 4205 kg 4365 kg HYDRAULIC HYDRAULIC STD STD STD STD STD STD STD STD 3 3 1 1 10 11

A B C D E F G9m 2458 mm 2600 mm 740 mm 330 mm 4605 mm 2515 mm 3105 mm

11m 2458 mm 2600 mm 740 mm 330 mm 4715 mm 2815 mm 3105 mm

13m 2458 mm 2600 mm 740 mm 330 mm 4825 mm 3115 mm 3105 mm 15m 2458 mm 2600 mm 740 mm 330 mm 4935 mm 3315 mm 3105 mm

3

3

3

3

8’ 8’5” 2’4” 1’ 15’1” 8’2” 10’1”

8’ 8’5” 2’4” 1’ 15’4” 9’2” 10’1”

8’ 8’5” 2’4” 1’ 15’8” 10’2” 10’1” 8’ 8’5” 2’4” 1’ 16’1” 10’8” 10’1”


OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT N/A N/A

10 P O W E R M I X P R O E X P R E S S - S I N G L E A U G E R

KEY FEATURES

P O W E M I X P R O E X P R E S S - S I N G L E A U G E R 11

Like the Powermix Pro Popular, the single-auger Powermix Pro Express range features a tall auger for quick,

efficient mixing and three feed legs for fast, even feed-out.

Choose from 9-15m capacity models. The front-mounted Express conveyor is available as a fixed unit for feed

delivery to either side, or an elevating conveyor for dispensing into raised troughs to both sides.

The front mounted express conveyor is available as a fixed conveyor to deliver feed either side, or as an

elevating conveyor which allows the conveyor to be raised to feed into raised troughs.

FIXED OR ELEVATING FRONT CONVEYOR.

POWERMIX PRO EXPRESS9, 11, 13 & 15m - Single Auger3

LEDLights

HydraulicBraked Axle

Heavy DutyPlanetary GearboxAdjustable Drawbar

HydraulicFront Door

Flat-Sided Tub


750mm WideSuperior FoodGrade PU BeltWith Resistance ToAcids, Fats, OilsAnd UV Light

6mm Hardox LowerSidewall Lining(14mm Total)


Fixed or ElevatingFront Conveyor

Three Load Cells

ThreeFeedout

Legs

Ellevates Up To 5’Either Side

Auto Belt Tensioner

RubberStraw Ring

S500 GradeLower 8mm

Tub Walls

THE RANGE VOLUME AXLE SPEC TYRE SPECPOWERMIX PRO EXPRESS 9 9m SINGLE FIXED 385/55 R19.5

POWERMIX PRO EXPRESS 11 11m SINGLE FIXED 385/55 R19.5



3

3

3

3

3

Durable SprocketDrive Web Belt

10 P O W E R M I X P R O E X P R E S S - S I N G L E A U G E R

KEY FEATURES

P O W E M I X P R O E X P R E S S - S I N G L E A U G E R 11

Like the Powermix Pro Popular, the single-auger Powermix Pro Express range features a tall auger for quick,

efficient mixing and three feed legs for fast, even feed-out.

Choose from 9-15m capacity models. The front-mounted Express conveyor is available as a fixed unit for feed

delivery to either side, or an elevating conveyor for dispensing into raised troughs to both sides.

The front mounted express conveyor is available as a fixed conveyor to deliver feed either side, or as an

elevating conveyor which allows the conveyor to be raised to feed into raised troughs.


POWERMIX PRO EXPRESS9, 11, 13 & 15m - Single Auger3

LEDLights

HydraulicBraked Axle

Heavy DutyPlanetary GearboxAdjustable Drawbar

HydraulicFront Door

Flat-Sided Tub



6mm Hardox LowerSidewall Lining(14mm Total)


Fixed or ElevatingFront Conveyor

Three Load Cells

ThreeFeedout

Legs

Ellevates Up To 5’Either Side

Auto Belt Tensioner

RubberStraw Ring

S500 GradeLower 8mm

Tub Walls

THE RANGE VOLUME AXLE SPEC TYRE SPECPOWERMIX PRO EXPRESS 9 9m SINGLE FIXED 385/55 R19.5




3

3

3

3

3


DIMENSIONS


POWERMIX PRO EXPRESS9-15m 3 Single Auger

P O W E M I X P R O E X P R E S S - S I N G L E A U G E R 1312 P O W E R M I X P R O E X P R E S S - S I N G L E A U G E R

OPTIONS


333 3

(INC 386/65R22.5SUPER SINGLES)

WITH VARI SPEEDCONVEYOR

6500 kg* 7500 kg* 13m 15m 385/55R19.5 385/55R19.5 540 rpm 540 rpm 110 120 4525 kg 4685 kg STD STD STD STD STD STD STD STD 3 3 1 1 10 11

CAPACITY / LEVEL 4500 kg* 5500 kg*VOLUME / LEVEL 9m 11mTYRE SIZE 385/55R19.5 385/55R19.5PTO SPEED 540 rpm 540 rpmHP REQUIRED 95 100 UNLADEN WEIGHT 4100 kg 4360 kg DOOR CONFIGURATION FRONT CENTRE DOOR AND FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDRUBBER STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 3 3NUMBER OF AUGERS 1 1NUMBER OF BLADES 7 7AUGER MAGNET STD STD STD STD


ELECTRIC HYD CONTROL

ELEC. CONTROL

DG400 BASIC SCALE SYSTEM

DG600 PROG. SCALE SYSTEM

DG REMOTE ZERO


REMOTE SCALE HEAD


TWO SPEED GEARBOX

WIDE ANGLE PTO

425/40 R17 TYRE TUB RISER KIT

TUNGSTEN BLADES

REAR CENTRE DOOR CORNER REAR DOOR

9m 2730 mm 2350 mm 5300 mm 2515 mm 1425 mm 470 mm 3690 mm 9’ 7’9” 17’7” 8’3” 4’8” 1’7” 12’8” 11m 2730 mm 2350 mm 5410 mm 2815 mm 1425 mm 470 mm 3690 mm 9’ 7’9” 18“ 9’3” 4’8” 1’7” 12’8” 13m 2730 mm 2350 mm 5520 mm 3115 mm 1425 mm 470 mm 3690 mm 9’ 7’9” 18’4” 10’3” 4’8” 1’7” 12’8” 15m 2730 mm 2350 mm 5630 mm 3315 mm 1425 mm 470 mm 3690 mm 9’ 7’9” 18’9” 11’3” 4’8” 1’7” 12’8”

A B C D E F G3

3

3

3


OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

N/A N/A N/A N/A

N/A N/A N/A N/A

OPT OPT N/A N/A

DIMENSIONS


POWERMIX PRO EXPRESS9-15m 3 Single Auger

P O W E M I X P R O E X P R E S S - S I N G L E A U G E R 1312 P O W E R M I X P R O E X P R E S S - S I N G L E A U G E R

OPTIONS


333 3




CAPACITY / LEVEL 4500 kg* 5500 kg*VOLUME / LEVEL 9m 11mTYRE SIZE 385/55R19.5 385/55R19.5PTO SPEED 540 rpm 540 rpmHP REQUIRED 95 100 UNLADEN WEIGHT 4100 kg 4360 kg DOOR CONFIGURATION FRONT CENTRE DOOR AND FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDRUBBER STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 3 3NUMBER OF AUGERS 1 1NUMBER OF BLADES 7 7AUGER MAGNET STD STD STD STD


ELECTRIC HYD CONTROL

ELEC. CONTROL

DG400 BASIC SCALE SYSTEM

DG600 PROG. SCALE SYSTEM

DG REMOTE ZERO


REMOTE SCALE HEAD


TWO SPEED GEARBOX

WIDE ANGLE PTO

425/40 R17 TYRE TUB RISER KIT

TUNGSTEN BLADES

REAR CENTRE DOOR CORNER REAR DOOR

9m 2730 mm 2350 mm 5300 mm 2515 mm 1425 mm 470 mm 3690 mm 9’ 7’9” 17’7” 8’3” 4’8” 1’7” 12’8” 11m 2730 mm 2350 mm 5410 mm 2815 mm 1425 mm 470 mm 3690 mm 9’ 7’9” 18“ 9’3” 4’8” 1’7” 12’8” 13m 2730 mm 2350 mm 5520 mm 3115 mm 1425 mm 470 mm 3690 mm 9’ 7’9” 18’4” 10’3” 4’8” 1’7” 12’8” 15m 2730 mm 2350 mm 5630 mm 3315 mm 1425 mm 470 mm 3690 mm 9’ 7’9” 18’9” 11’3” 4’8” 1’7” 12’8”

A B C D E F G3

3

3

3


OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

OPT OPT OPT OPT

N/A N/A N/A N/A

N/A N/A N/A N/A

OPT OPT N/A N/A

THE RANGE VOLUME AXLE SPEC TYRE SPECPOWERMIX PRO EXPRESS 16 SA 16m SINGLE FIXED 435/50 R19.5

POWERMIX PRO EXPRESS 16 TA 16m SPRUNG TANDEM 385/55 R22.5

POWERMIX PRO EXPRESS 19 SA 19m SINGLE FIXED 435/50 R19.5





POWERMIX PRO EXPRESS16, 19, 22 & 25m - Twin Auger3

Two-Speed Gearbox

LEDLights

Heavy DutyPlanetary Gearboxes

AdjustableDrawbar

Four LoadCells

FullChassis

3

3

3

3

3

3

With the twin auger Powermix Pro Express models, you get the specification to handle higher daily feed-out

demands, with options such as sprung tandem axles, plus capacities of up to 25m. But the same tall auger

design means you still get Shelbourne's trademark speedy yet thorough mixing, and the three feed legs

again help ensure even feed-out.

14 P O W E R M I X P R O E X P R E S S - T W I N A U G E R P O W E M I X P R O E X P R E S S - T W I N A U G E R 15

KEY FEATURES

Flat-Sided Tub

AdjustableCorner Knives

Multi-Position Scale DisplayFixed or Elevating

Front Conveyor

RubberStraw Ring

S500 GradeLower 8mm

Tub Walls

HydraulicFront Door

3

Elevates Upto 5’Either Side

Auto BeltTensioner


10mm S500Sidewall Lining(18mm Total)


THE RANGE VOLUME AXLE SPEC TYRE SPECPOWERMIX PRO EXPRESS 16 SA 16m SINGLE FIXED 435/50 R19.5


POWERMIX PRO EXPRESS 19 SA 19m SINGLE FIXED 435/50 R19.5





POWERMIX PRO EXPRESS16, 19, 22 & 25m - Twin Auger3

Two-Speed Gearbox

LEDLights

Heavy DutyPlanetary Gearboxes

AdjustableDrawbar

Four LoadCells

FullChassis

3

3

3

3

3

3

With the twin auger Powermix Pro Express models, you get the specification to handle higher daily feed-out

demands, with options such as sprung tandem axles, plus capacities of up to 25m. But the same tall auger

design means you still get Shelbourne's trademark speedy yet thorough mixing, and the three feed legs

again help ensure even feed-out.

14 P O W E R M I X P R O E X P R E S S - T W I N A U G E R P O W E M I X P R O E X P R E S S - T W I N A U G E R 15

KEY FEATURES

Flat-Sided Tub

AdjustableCorner Knives

Multi-Position Scale DisplayFixed or Elevating

Front Conveyor

RubberStraw Ring

S500 GradeLower 8mm

Tub Walls

HydraulicFront Door

3

Elevates Upto 5’Either Side

Auto BeltTensioner


10mm S500Sidewall Lining(18mm Total)


DIMENSIONS


POWERMIX PRO EXPRESS16-19m 3 Twin Auger - Single Axle

P O W E M I X P R O E X P R E S S - T W I N A U G E R 1716 P O W E R M I X P R O E X P R E S S - T W I N A U G E R


CAPACITY / LEVEL 8000 kg* 9500 kg*VOLUME / LEVEL 16m 19mTYRE SIZE 435/50R19.5 435/50R19.5PTO SPEED 540 rpm 540 rpmHP REQUIRED 110 120 UNLADEN WEIGHT 8030 kg 8435 kg DOOR CONFIGURATION FRONT CENTRE DOOR & FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDRUBBER STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 4 4NUMBER OF AUGERS 2 2NUMBER OF BLADES 14 14TWO SPEED GEARBOX STD STD AUGER MAGNET STD STD

ELECTRIC HYD CONTROL OPT OPT

ELEC. CONTROL WITH VARI SPEED CONVEYOR OPT OPT

MANUAL VALVE HYDRAULIC CONTROL OPT OPT

DG400 BASIC SCALE SYSTEM OPT OPT

DG600 PROG. SCALE SYSTEM OPT OPT

REMOTE SCALE HEAD OPT OPT

DG REMOTE ZERO OPT OPT

DG GPRS DATA TRANSFER KIT OPT OPT

BATTERY PACK FOR SCALE OPT OPT

ELEVATING FRONT CONVEYOR OPT OPT

FIXED FRONT CONVEYOR OPT OPT

WIDE ANGLE PTO OPT OPT

18R 22.5 TYRE OPT OPT

TUNGSTEN BLADES OPT OPT

REAR CENTRE DOOR N/A N/A

CORNER REAR DOOR N/A N/A

OPTIONS

STANDARD FEATURES 16M 19M

3 3

2730 mm 2350 mm 7580 mm 2730 mm 1670 mm 415 mm 5115 mm

9’ 7’9” 24’8” 9’ 5’4” 1’4” 16’7”

2730 mm 2350 mm 7580 mm 2520 mm 1460 mm 410 mm 5115 mm

9’ 7’9” 24’8” 8’2“ 4’7“ 1’3” 16’7”

2730 mm 2350 mm 7690 mm 3030 mm 1670 mm 415 mm 5115 mm

9’ 7’9” 25’3” 9’9“ 5’4” 1’4” 16’7”

2730 mm 2350 mm 7690 mm 2820 mm 1460 mm 410 mm 5115 mm

9’ 7’9” 25’3” 9’2“ 4’7“ 1’3” 16’7”

A B C D E F G

3

3

3

3

16m

18 R22.5

16m

435/50 R19.5

19m

18 R22.5

19m

435/50 R19.5

DIMENSIONS


POWERMIX PRO EXPRESS16-19m 3 Twin Auger - Single Axle



CAPACITY / LEVEL 8000 kg* 9500 kg*VOLUME / LEVEL 16m 19mTYRE SIZE 435/50R19.5 435/50R19.5PTO SPEED 540 rpm 540 rpmHP REQUIRED 110 120 UNLADEN WEIGHT 8030 kg 8435 kg DOOR CONFIGURATION FRONT CENTRE DOOR & FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDRUBBER STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 4 4NUMBER OF AUGERS 2 2NUMBER OF BLADES 14 14TWO SPEED GEARBOX STD STD AUGER MAGNET STD STD

ELECTRIC HYD CONTROL OPT OPT

ELEC. CONTROL WITH VARI SPEED CONVEYOR OPT OPT

MANUAL VALVE HYDRAULIC CONTROL OPT OPT

DG400 BASIC SCALE SYSTEM OPT OPT

DG600 PROG. SCALE SYSTEM OPT OPT

REMOTE SCALE HEAD OPT OPT

DG REMOTE ZERO OPT OPT

DG GPRS DATA TRANSFER KIT OPT OPT

BATTERY PACK FOR SCALE OPT OPT

ELEVATING FRONT CONVEYOR OPT OPT

FIXED FRONT CONVEYOR OPT OPT

WIDE ANGLE PTO OPT OPT

18R 22.5 TYRE OPT OPT

TUNGSTEN BLADES OPT OPT

REAR CENTRE DOOR N/A N/A

CORNER REAR DOOR N/A N/A

OPTIONS

STANDARD FEATURES 16M 19M

3 3

2730 mm 2350 mm 7580 mm 2730 mm 1670 mm 415 mm 5115 mm

9’ 7’9” 24’8” 9’ 5’4” 1’4” 16’7”

2730 mm 2350 mm 7580 mm 2520 mm 1460 mm 410 mm 5115 mm

9’ 7’9” 24’8” 8’2“ 4’7“ 1’3” 16’7”

2730 mm 2350 mm 7690 mm 3030 mm 1670 mm 415 mm 5115 mm

9’ 7’9” 25’3” 9’9“ 5’4” 1’4” 16’7”

2730 mm 2350 mm 7690 mm 2820 mm 1460 mm 410 mm 5115 mm

9’ 7’9” 25’3” 9’2“ 4’7“ 1’3” 16’7”

A B C D E F G

3

3

3

3

16m

18 R22.5

16m

435/50 R19.5

19m

18 R22.5

19m

435/50 R19.5


POWERMIX PRO EXPRESS16-25m 3 Twin Auger - Tandem Axle

18 P O W E R M I X P R O E X P R E S S - T W I N A U G E R


2730 mm 2350 mm 7690 mm 2899 mm 1500 mm 465 mm 5200 mm

CAPACITY / LEVEL 8000 kg* 9500 kg*VOLUME / LEVEL 16m 19mTYRE SIZE 385/55R19.5 385/55R19.5AXLE TYPE TANDEM SPRUNG PTO SPEED 540 rpm 540 rpmHP REQUIRED 110 120 UNLADEN WEIGHT 8325 kg 8730 kg DOOR CONFIGURATION FRONT CENTRE DOOR AND FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDRUBBER STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 4 4NUMBER OF AUGERS 2 2NUMBER OF BLADES 14 14AUGER MAGNET STD STD STD STD TWO SPEED GEARBOX STD STD STD STD

ELECTRIC HYD CONTROL OPT OPTELEC. CONTROL OPT OPTMANUAL VALVE HYD CONTROL OPT OPTDG400 BASIC SCALE SYSTEM OPT OPTDG600 PROG. SCALE SYSTEM OPT OPT REMOTE SCALE HEAD OPT OPTDG REMOTE ZERO OPT OPTDG GPRS DATA TRANSFER KIT OPT OPT BATTERY PACK FOR SCALE OPT OPT

ELEVATING FRONT CONVEYOR OPT OPTFIXED FRONT CONVEYOR OPT OPTWIDE ANGLE PTO OPT OPT 385/55R19.5 TYRES OPT OPT435/50R19.5 TYRES OPT OPT TUB RISER KIT OPT OPTTUNGSTEN BLADES OPT OPTREAR CENTRE DOOR N/A N/ACORNER REAR DOOR N/A N/AAIR BRAKES OPT OPTSTEERING AXLE (HYD BRAKES) OPT OPTSTEERING AXLE (AIR BRAKES) OPT OPT


OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT N/A N/A N/A N/A OPT OPT OPT OPT OPT OPT

OPTIONS


333 3



DIMENSIONS


POWERMIX PRO EXPRESS16-25m 3 Twin Auger - Tandem Axle



16m 2730 mm 2350 mm 7580 mm 2599 mm 1500 mm 465 mm 5200 mm 9’ 7’9” 25’3” 8’5” 4’11” 1’5” 17’ 19m 2730 mm 2350 mm 7690 mm 2899 mm 1500 mm 465 mm 5200 mm 9’ 7’9” 25’8” 9’5” 4’11” 1’5” 17’ 22m 2730 mm 2350 mm 7800 mm 3199 mm 1500 mm 465 mm 5200 mm 9’ 7’9” 25’5” 10’4” 4’11” 1’5” 17’ 25m 2730 mm 2350 mm 7870 mm 3399 mm 1500 mm 465 mm 5200 mm 9’ 7’9” 25’8” 11’1” 4’11” 1’5” 17’

A B C D E F G

3

3

3

3

CAPACITY / LEVEL 8000 kg* 9500 kg*VOLUME / LEVEL 16m 19mTYRE SIZE 385/55R19.5 385/55R19.5AXLE TYPE TANDEM SPRUNG PTO SPEED 540 rpm 540 rpmHP REQUIRED 110 120 UNLADEN WEIGHT 8325 kg 8730 kg DOOR CONFIGURATION FRONT CENTRE DOOR AND FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDRUBBER STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 4 4NUMBER OF AUGERS 2 2NUMBER OF BLADES 14 14AUGER MAGNET STD STD STD STD TWO SPEED GEARBOX STD STD STD STD

ELECTRIC HYD CONTROL OPT OPTELEC. CONTROL OPT OPTMANUAL VALVE HYD CONTROL OPT OPTDG400 BASIC SCALE SYSTEM OPT OPTDG600 PROG. SCALE SYSTEM OPT OPT REMOTE SCALE HEAD OPT OPTDG REMOTE ZERO OPT OPTDG GPRS DATA TRANSFER KIT OPT OPT BATTERY PACK FOR SCALE OPT OPT

ELEVATING FRONT CONVEYOR OPT OPTFIXED FRONT CONVEYOR OPT OPTWIDE ANGLE PTO OPT OPT 385/55R19.5 TYRES OPT OPT435/50R19.5 TYRES OPT OPT TUB RISER KIT OPT OPTTUNGSTEN BLADES OPT OPTREAR CENTRE DOOR N/A N/ACORNER REAR DOOR N/A N/AAIR BRAKES OPT OPTSTEERING AXLE (HYD BRAKES) OPT OPTSTEERING AXLE (AIR BRAKES) OPT OPT


OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT N/A N/A N/A N/A OPT OPT OPT OPT OPT OPT

OPTIONS


333 3



20 P O W E R M I X P L U S - C O M P A C T

KEY FEATURES

P O W E M I X P L U S - C O M P A C T 21

3

LED Lights

ThreeLoad Cells

High CapacityGearboxes

Elevating FrontConveyor

Integrated Straw Ring

S500 Grade12mm ThickLower Tub Walls

Multi-PositionKnives

Front MountedLadder & Platform

Auto Belt TensionerWireless Control

Of Door AndTwo-Speed

Conveyor

Recessed LockingDoor To Maintain

Internal Tub Shape

ReplaceableAuger Wear Pads

Smooth TubShape For Faster

Bale Chopping

Smooth ScrolledAugers with

Greater WearProperties

PAGE

3

THE RANGE VOLUME AXLE SPEC TYRE SPECPOWERMIX PLUS 16 SA 16m SINGLE FIXED 435/50 R19.5

POWERMIX PLUS 16 TA 16m TANDEM SPRUNG 385/55 R22.5

POWERMIX PLUS 18 SA 18m SINGLE FIXED 435/50 R19.5





Designed around a short chassis and with Shelbourne's distinctive curved tub to speed up bale processing

and mixing, the 16-22m Powermix Plus Express models are engineered to meet the needs of those seeking

high capacity in a manoeuvrable, compact package.

ELEVATING FRONT CONVEYOR.

POWERMIX PLUS16, 18, 20 & 22m Compact - Twin Auger

3

3

3

3

3

3

3

3

Three FeedOut Legs

MonocoqueTub Design

IncorporatesChassis

Unencumbered Feedout Visibility


20 P O W E R M I X P L U S - C O M P A C T

KEY FEATURES

P O W E M I X P L U S - C O M P A C T 21

3

LED Lights

ThreeLoad Cells

High CapacityGearboxes

Elevating FrontConveyor


S500 Grade12mm ThickLower Tub Walls

Multi-PositionKnives


Auto Belt TensionerWireless Control

Of Door AndTwo-Speed

Conveyor

Recessed LockingDoor To Maintain

Internal Tub Shape

ReplaceableAuger Wear Pads


Bale Chopping

Smooth ScrolledAugers with

Greater WearProperties

PAGE

3

THE RANGE VOLUME AXLE SPEC TYRE SPECPOWERMIX PLUS 16 SA 16m SINGLE FIXED 435/50 R19.5







Designed around a short chassis and with Shelbourne's distinctive curved tub to speed up bale processing

and mixing, the 16-22m Powermix Plus Express models are engineered to meet the needs of those seeking

high capacity in a manoeuvrable, compact package.

ELEVATING FRONT CONVEYOR.

POWERMIX PLUS16, 18, 20 & 22m Compact - Twin Auger

3

3

3

3

3

3

3

3

Three FeedOut Legs

MonocoqueTub Design

IncorporatesChassis



DIMENSIONS


POWERMIX PLUS16-20m 3 Compact - Twin Auger - Single Axle

P O W E M I X P L U S - C O M P A C T 2322 P O W E R M I X P L U S - C O M P A C T

CAPACITY / LEVEL 8000 kg* 9000 kg* 10000 kg*VOLUME / LEVEL 16m 18m 20mTYRE SIZE 435/55R19.5 435/55R19.5 435/55R19.5AXLE TYPE SINGLE PTO SPEED 540 rpm 540 rpm 540 rpmHP REQUIRED 110 120 130 UNLADEN WEIGHT 7648 kg 7680 kg 7864 kg DOOR CONFIGURATION DOOR OPERATION HYDRAULIC HYDRAULIC BRAKES STD STD STDLED LIGHTS STD STD STDADJUSTABLE CORNER KNIVES STD STD STDSTEEL STRAW RETAINING RING STD STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 3 3 3NUMBER OF AUGERS 2 2 2NUMBER OF BLADES 14 14 14ELEVATING FRONT CONVEYOR STD STD STDFIXED FRONT CONVEYOR N/A N/A N/ATWO SPEED GEARBOX STD STD STDAUGER MAGNET STD STD STD

ELECTRIC WITH VARI SPEED CONVEYOR 2 SPD CHANGE OPT OPT OPTWIRELESS WITH VARI SPEED CONVEYOR 2 SPD CHANGE OPT OPT OPTELECTRIC WITH VARI SPEED CONVEYOR OPT OPT OPTMANUAL VALVE HYDRAULIC CONTROL OPT OPT OPT

DG400 BASIC SCALE SYSTEM OPT OPT OPTDG600 PROG. SCALE SYSTEM OPT OPT OPT

REMOTE SCALE HEAD OPT OPT OPTDG REMOTE ZERO OPT OPT OPTDG GPRS DATA TRANSFER KIT OPT OPT OPT

BATTERY PACK FOR SCALE OPT OPT OPT

WIDE ANGLE PTO OPT OPT OPT

TUNGSTEN BLADES OPT OPT OPTREAR CENTRE DOOR OPT OPT OPTCORNER REAR DOOR N/A N/A N/A

OPTIONS

STANDARD FEATURES 16M 20M18M

3 3 3

FRONT CENTRE DOOR & FRONT WEBBING CONVEYOR

2380 mm 2730 mm 7355 mm 2810 mm 1450 mm 463 mm 5100 mm 7’8” 8’9” 24’1” 9’2” 4’7” 1’5” 16’7” 2380 mm 2730 mm 7355 mm 2945 mm 1585 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 9’6” 5’2” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 2730 mm 1370 mm 402 mm 5100 mm 7’8” 8’9” 24’1” 8’9” 4’4” 1’3” 16’7” 2380 mm 2730 mm 7355 mm 2945 mm 1450 mm 463 mm 5100 mm 7’8” 8’9” 24’1” 9’6” 4’7” 1’5” 16’7” 2380 mm 2730 mm 7355 mm 3080 mm 1585 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 10’1” 5’2” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 2865 mm 1370 mm 402 mm 5100 mm 7’8” 8’9” 24’1” 9’3” 4’4” 1’3” 16’7” 2380 mm 2730 mm 7355 mm 3135 mm 1450 mm 463 mm 5100 mm 7’8” 8’9” 24’1” 10’2” 4’7” 1’5” 16’7” 2380 mm 2730 mm 7355 mm 3270 mm 1585 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 10’7” 5’2” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 3055 mm 1370 mm 402 mm 5100 mm 7’8” 8’9” 24’1” 10’ 4’4” 1’3” 16’7”

AMODEL - TYRE B C D E F G

16m - 435/50 R19.5

16m - 385/65 R22.5

16m - 235/75 R17.5

18m - 435/50 R19.5

18m - 385/65 R22.5

18m - 235/75 R17.5

20m - 435/50 R19.5

20m - 385/65 R22.5

20m - 235/75 R17.5

3

3

3

3

3

3

3

3

3

DIMENSIONS


POWERMIX PLUS16-20m 3 Compact - Twin Auger - Single Axle

P O W E M I X P L U S - C O M P A C T 2322 P O W E R M I X P L U S - C O M P A C T

CAPACITY / LEVEL 8000 kg* 9000 kg* 10000 kg*VOLUME / LEVEL 16m 18m 20mTYRE SIZE 435/55R19.5 435/55R19.5 435/55R19.5AXLE TYPE SINGLE PTO SPEED 540 rpm 540 rpm 540 rpmHP REQUIRED 110 120 130 UNLADEN WEIGHT 7648 kg 7680 kg 7864 kg DOOR CONFIGURATION DOOR OPERATION HYDRAULIC HYDRAULIC BRAKES STD STD STDLED LIGHTS STD STD STDADJUSTABLE CORNER KNIVES STD STD STDSTEEL STRAW RETAINING RING STD STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 3 3 3NUMBER OF AUGERS 2 2 2NUMBER OF BLADES 14 14 14ELEVATING FRONT CONVEYOR STD STD STDFIXED FRONT CONVEYOR N/A N/A N/ATWO SPEED GEARBOX STD STD STDAUGER MAGNET STD STD STD

ELECTRIC WITH VARI SPEED CONVEYOR 2 SPD CHANGE OPT OPT OPTWIRELESS WITH VARI SPEED CONVEYOR 2 SPD CHANGE OPT OPT OPTELECTRIC WITH VARI SPEED CONVEYOR OPT OPT OPTMANUAL VALVE HYDRAULIC CONTROL OPT OPT OPT

DG400 BASIC SCALE SYSTEM OPT OPT OPTDG600 PROG. SCALE SYSTEM OPT OPT OPT

REMOTE SCALE HEAD OPT OPT OPTDG REMOTE ZERO OPT OPT OPTDG GPRS DATA TRANSFER KIT OPT OPT OPT

BATTERY PACK FOR SCALE OPT OPT OPT

WIDE ANGLE PTO OPT OPT OPT

TUNGSTEN BLADES OPT OPT OPTREAR CENTRE DOOR OPT OPT OPTCORNER REAR DOOR N/A N/A N/A

OPTIONS

STANDARD FEATURES 16M 20M18M

3 3 3

FRONT CENTRE DOOR & FRONT WEBBING CONVEYOR

2380 mm 2730 mm 7355 mm 2810 mm 1450 mm 463 mm 5100 mm 7’8” 8’9” 24’1” 9’2” 4’7” 1’5” 16’7” 2380 mm 2730 mm 7355 mm 2945 mm 1585 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 9’6” 5’2” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 2730 mm 1370 mm 402 mm 5100 mm 7’8” 8’9” 24’1” 8’9” 4’4” 1’3” 16’7” 2380 mm 2730 mm 7355 mm 2945 mm 1450 mm 463 mm 5100 mm 7’8” 8’9” 24’1” 9’6” 4’7” 1’5” 16’7” 2380 mm 2730 mm 7355 mm 3080 mm 1585 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 10’1” 5’2” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 2865 mm 1370 mm 402 mm 5100 mm 7’8” 8’9” 24’1” 9’3” 4’4” 1’3” 16’7” 2380 mm 2730 mm 7355 mm 3135 mm 1450 mm 463 mm 5100 mm 7’8” 8’9” 24’1” 10’2” 4’7” 1’5” 16’7” 2380 mm 2730 mm 7355 mm 3270 mm 1585 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 10’7” 5’2” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 3055 mm 1370 mm 402 mm 5100 mm 7’8” 8’9” 24’1” 10’ 4’4” 1’3” 16’7”


16m - 435/50 R19.5

16m - 385/65 R22.5

16m - 235/75 R17.5

18m - 435/50 R19.5

18m - 385/65 R22.5

18m - 235/75 R17.5

20m - 435/50 R19.5

20m - 385/65 R22.5

20m - 235/75 R17.5

3

3

3

3

3

3

3

3

3


POWERMIX PLUS16-22m 3 Twin Auger - Tandem Axle

24 P O W E R M I X P L U S - E L E V A T I N G C O N V E Y O R

CAPACITY / LEVEL 8000 kg* 9000 kg*VOLUME / LEVEL 16m 18mTYRE SIZE 385/55R22.5 385/55R22.5AXLE TYPE TANDEM SPRUNG PTO SPEED 540 rpm 540 rpmHP REQUIRED 110 120 UNLADEN WEIGHT 8308 kg 8340 kg DOOR CONFIGURATION FRONT CENTRE DOOR AND FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDSTEEL STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 3 3NUMBER OF AUGERS 2 2NUMBER OF BLADES 14 14TWO SPEED GEARBOX STD STDELEVATING FRONT CONVEYOR STD STD STD STDFIXED FRONT CONVEYOR N/A N/A AUGER MAGNET STD STD STD STD OPT OPT OPT OPT OPT OPTDG400 BASIC SCALE SYSTEM OPT OPTDG600 PROG. SCALE SYSTEM OPT OPT REMOTE SCALE HEAD OPT OPTDG REMOTE ZERO OPT OPTDG GPRS DATA TRANSFER KIT OPT OPT BATTERY PACK FOR SCALE OPT OPT WIDE ANGLE PTO OPT OPT TUNGSTEN BLADES OPT OPTREAR CENTRE DOOR OPT OPTCORNER REAR DOOR N/A N/AAIR BRAKES OPT OPTSTEERING AXLE (HYD BRAKES) OPT OPTSTEERING AXLE (AIR BRAKES) OPT OPT

10000 kg* 11000 kg* 20m 22m 385/55R22.5 385/55R22.5 540 rpm 540 rpm 130 140 8524 kg 8637 kg STD STD STD STD STD STD STD STD 3 3 2 2 14 16 STD STD N/A N/A OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT N/A N/A OPT OPT OPT OPT OPT OPT

OPTIONS


333 3

ELECTRIC CONTROL WITH VARISPEED CONVEYOR / 2 SPD CHANGEWIRELESS CONTROL WITH VARISPEED CONVEYOR / 2 SPD CHANGEELECTRIC CONTROL WITHVARI SPEED CONVEYOR

DIMENSIONS


POWERMIX PLUS16-22m 3 Twin Auger - Tandem Axle

P O W E M I X P L U S - E L E V A T I N G C O N V E Y O R 2524 P O W E R M I X P L U S - E L E V A T I N G C O N V E Y O R

2380 mm 2730 mm 7355 mm 2925 mm 1565 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 9’5” 5’1” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 2862 mm 1502 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 9’3” 4’9” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 3060 mm 1565 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 10’ 5’1” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 2997 mm 1502 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 9’8” 4’9” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 3250 mm 1565 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 10’6” 5’1” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 3187 mm 1502 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 10’4” 4’9” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 3428 mm 1565 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 11’2” 5’1”” 1’6” 16’7” 2380 mm 2730 mm 7355 mm 3365 mm 1502 mm 489 mm 5100 mm 7’8” 8’9” 24’1” 11’ 4’9” 1’6” 16’7”


16m - 385/55 R22.5

16m - 385/55 R19.5

18m - 385/55 R22.5

18m - 385/55 R19.5

20m - 385/55 R22.5

20m - 385/55 R19.5

22m - 385/55 R22.5

22m - 385/55 R19.5

3

3

3

3

3

3

3

3

CAPACITY / LEVEL 8000 kg* 9000 kg*VOLUME / LEVEL 16m 18mTYRE SIZE 385/55R22.5 385/55R22.5AXLE TYPE TANDEM SPRUNG PTO SPEED 540 rpm 540 rpmHP REQUIRED 110 120 UNLADEN WEIGHT 8308 kg 8340 kg DOOR CONFIGURATION FRONT CENTRE DOOR AND FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC BRAKES STD STDLED LIGHTS STD STDADJUSTABLE CORNER KNIVES STD STDSTEEL STRAW RETAINING RING STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 3 3NUMBER OF AUGERS 2 2NUMBER OF BLADES 14 14TWO SPEED GEARBOX STD STDELEVATING FRONT CONVEYOR STD STD STD STDFIXED FRONT CONVEYOR N/A N/A AUGER MAGNET STD STD STD STD OPT OPT OPT OPT OPT OPTDG400 BASIC SCALE SYSTEM OPT OPTDG600 PROG. SCALE SYSTEM OPT OPT REMOTE SCALE HEAD OPT OPTDG REMOTE ZERO OPT OPTDG GPRS DATA TRANSFER KIT OPT OPT BATTERY PACK FOR SCALE OPT OPT WIDE ANGLE PTO OPT OPT TUNGSTEN BLADES OPT OPTREAR CENTRE DOOR OPT OPTCORNER REAR DOOR N/A N/AAIR BRAKES OPT OPTSTEERING AXLE (HYD BRAKES) OPT OPTSTEERING AXLE (AIR BRAKES) OPT OPT

10000 kg* 11000 kg* 20m 22m 385/55R22.5 385/55R22.5 540 rpm 540 rpm 130 140 8524 kg 8637 kg STD STD STD STD STD STD STD STD 3 3 2 2 14 14 STD STD N/A N/A OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT OPT N/A N/A OPT OPT OPT OPT OPT OPT

OPTIONS


333 3

ELECTRIC CONTROL WITH VARISPEED CONVEYOR / 2 SPD CHANGEWIRELESS CONTROL WITH VARISPEED CONVEYOR / 2 SPD CHANGEELECTRIC CONTROL WITHVARI SPEED CONVEYOR

26 P O W E R M I X P L U S - W I D E B O D Y

KEY FEATURES

P O W E M I X P L U S - W I D E B O D Y 27

THE RANGE VOLUME AXLE SPEC TYRE SPECPOWERMIX PLUS 22 TA 22m TANDEM SPRUNG 435/50 R19.5




With a short chassis for manoeuvrability and a curved tub shape for more efficient bale processing and faster

mixing times, the Powermix Plus Wide Body is the flagship of the Shelbourne Reynolds range, designed for

the largest herds and most demanding users. The high capacity yet compact twin auger line now includes

four flagship models, aimed at users feeding 100t or more per day.

FOR THE MOST DEMANDING USERS.

POWERMIX PLUS22, 24, 28 & 30m Wide Body - Twin Auger3

Optional Rear Hyd. Door

SteelMudguards

High CapacityGearbox

24 Tonne ParabolicSprung Axles

850mmWide Belt

Premium Tyres435/50/R19.5


15mm S500 GradeAuger Flights With15mm StainlessSteel Edge

Hardox450 Floor


Three AugerFeed-Out Legs

With ReplaceableStainless Steel Pads

Superior 850mm FoodGrade PU Belt WithResistance To Acid, Fats& Oils & UV Light

High Capacity Two-SpeedGearbox Rated at 245hp

Wireless Conveyor Door& Two-Speed Control

W2600 PTO Shafts

Automatic FeedDeflector

Wider Door ForFaster Feedout


Bale Chopping

S500 GradeReplaceable

Built InLower Tub

Liner Sections

3

3

3

3

Auto BeltTensioner


26 P O W E R M I X P L U S - W I D E B O D Y

KEY FEATURES

P O W E M I X P L U S - W I D E B O D Y 27

THE RANGE VOLUME AXLE SPEC TYRE SPECPOWERMIX PLUS 22 TA 22m TANDEM SPRUNG 435/50 R19.5





mixing times, the Powermix Plus Wide Body is the flagship of the Shelbourne Reynolds range, designed for

the largest herds and most demanding users. The high capacity yet compact twin auger line now includes

four flagship models, aimed at users feeding 100t or more per day.

FOR THE MOST DEMANDING USERS.

POWERMIX PLUS22, 24, 28 & 30m Wide Body - Twin Auger3

Optional Rear Hyd. Door

SteelMudguards

High CapacityGearbox

24 Tonne ParabolicSprung Axles

850mmWide Belt

Premium Tyres435/50/R19.5


15mm S500 GradeAuger Flights With15mm StainlessSteel Edge

Hardox450 Floor


Three AugerFeed-Out Legs

With ReplaceableStainless Steel Pads

Superior 850mm FoodGrade PU Belt WithResistance To Acid, Fats& Oils & UV Light

High Capacity Two-SpeedGearbox Rated at 245hp

Wireless Conveyor Door& Two-Speed Control

W2600 PTO Shafts

Automatic FeedDeflector

Wider Door ForFaster Feedout


Bale Chopping

S500 GradeReplaceable

Built InLower Tub

Liner Sections

3

3

3

3

Auto BeltTensioner


DIMENSIONS


POWERMIX PLUS22-30m 3 Wide Body

P O W E M I X P L U S - W I D E B O D Y 2928 P O W E R M I X P L U S - W I D E B O D Y


CAPACITY / LEVEL 11000 kg* 12000 kg* 14000 kg* 15000 kg*VOLUME / LEVEL 22m 24m 28m 30mTYRE SIZE 435/50R19.5 435/50R19.5 435/50R19.5 435/50R19.5AXLE TYPE TANDEM SPRUNG PTO SPEED 540 rpm 540 rpm 540 rpm 540 rpmHP REQUIRED 140 140 160 160 UNLADEN WEIGHT 10105 kg 10290 kg 11048 kg 11200 kg DOOR CONFIGURATION FRONT CENTRE DOOR AND FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC BRAKES STD STD STD STDLED LIGHTS STD STD STD STDADJUSTABLE CORNER KNIVES STD STD STD STDSTEEL STRAW RETAINING RING STD STD STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 6 6 6 6NUMBER OF AUGERS 2 2 2 2NUMBER OF BLADES 14 14 18 18 TWO SPEED GEARBOX STD STD STD STD AUGER MAGNET STD STD STD STD ELEVATING CONVEYOR STD STD STD STD FIXED FRONT CONVEYOR N/A N/A N/A N/A

MANUAL HYD VALVE CONTROLDG400 BASIC SCALE SYSTEM DG600 PROG. SCALE SYSTEM DG REMOTE ZERO DG GPRS DATA TRANSFER KIT REMOTE SCALE HEADBATTERY PACK FOR SCALE WIDE ANGLE PTO TUNGSTEN BLADES REAR CENTRE DOOR N/A N/A N/A N/ACORNER REAR DOOR (LH)

OPTIONS


3 3 3 3

ELECTRIC CONTROL WITH VARISPEED CONVEYOR / 2 SPD CHANGEWIRELESS ELECTRIC CONTROL WITH VARISPEED CONVEYOR / 2 SPD CHANGE

2965 mm 2756 mm 8259 mm 2900 mm 1555 mm 336 mm 5530 mm 9’9” 9’1” 27’ 9’6” 5’1” 1’1” 18’2” 2965 mm 2756 mm 8259 mm 3085 mm 1555 mm 336 mm 5530 mm 9’9” 9’1” 27’ 10’1” 5’1” 1’1” 18’2” 2965 mm 2756 mm 8259 mm 3310 mm 1555 mm 336 mm 5530 mm 9’9” 9’1” 27’ 10’10” 5’1” 1’1” 18’2” 2965 mm 2756 mm 8259 mm 3495 mm 1555 mm 336 mm 5530 mm 9’9” 9’1” 27’ 11’5” 5’1” 1’1” 18’2”

22m - 435/50 R19.5

24m - 435/50 R19.5

28m - 435/50 R19.5

30m - 435/50 R19.5

3

3

3

3

AMODEL - TYRE B C D E F GOPT

OPT

OPT

OPT

OPT

OPT

OPT

OPTOPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPTOPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPTOPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPTOPT

OPT

OPT

OPT

DIMENSIONS


POWERMIX PLUS22-30m 3 Wide Body

P O W E M I X P L U S - W I D E B O D Y 2928 P O W E R M I X P L U S - W I D E B O D Y


CAPACITY / LEVEL 11000 kg* 12000 kg* 14000 kg* 15000 kg*VOLUME / LEVEL 22m 24m 28m 30mTYRE SIZE 435/50R19.5 435/50R19.5 435/50R19.5 435/50R19.5AXLE TYPE TANDEM SPRUNG PTO SPEED 540 rpm 540 rpm 540 rpm 540 rpmHP REQUIRED 140 140 160 160 UNLADEN WEIGHT 10105 kg 10290 kg 11048 kg 11200 kg DOOR CONFIGURATION FRONT CENTRE DOOR AND FRONT WEBBING CONVEYOR DOOR OPERATION HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC BRAKES STD STD STD STDLED LIGHTS STD STD STD STDADJUSTABLE CORNER KNIVES STD STD STD STDSTEEL STRAW RETAINING RING STD STD STD STDHYDRAULIC CONTROL HOSES DIRECT TO TRACTORNUMBER OF LOAD CELLS 6 6 6 6NUMBER OF AUGERS 2 2 2 2NUMBER OF BLADES 14 14 18 18 TWO SPEED GEARBOX STD STD STD STD AUGER MAGNET STD STD STD STD ELEVATING CONVEYOR STD STD STD STD FIXED FRONT CONVEYOR N/A N/A N/A N/A

MANUAL HYD VALVE CONTROLDG400 BASIC SCALE SYSTEM DG600 PROG. SCALE SYSTEM DG REMOTE ZERO DG GPRS DATA TRANSFER KIT REMOTE SCALE HEADBATTERY PACK FOR SCALE WIDE ANGLE PTO TUNGSTEN BLADES REAR CENTRE DOOR N/A N/A N/A N/ACORNER REAR DOOR (LH)

OPTIONS


3 3 3 3

ELECTRIC CONTROL WITH VARISPEED CONVEYOR / 2 SPD CHANGEWIRELESS ELECTRIC CONTROL WITH VARISPEED CONVEYOR / 2 SPD CHANGE

2965 mm 2756 mm 8259 mm 2900 mm 1555 mm 336 mm 5530 mm 9’9” 9’1” 27’ 9’6” 5’1” 1’1” 18’2” 2965 mm 2756 mm 8259 mm 3085 mm 1555 mm 336 mm 5530 mm 9’9” 9’1” 27’ 10’1” 5’1” 1’1” 18’2” 2965 mm 2756 mm 8259 mm 3310 mm 1555 mm 336 mm 5530 mm 9’9” 9’1” 27’ 10’10” 5’1” 1’1” 18’2” 2965 mm 2756 mm 8259 mm 3495 mm 1555 mm 336 mm 5530 mm 9’9” 9’1” 27’ 11’5” 5’1” 1’1” 18’2”

22m - 435/50 R19.5

24m - 435/50 R19.5

28m - 435/50 R19.5

30m - 435/50 R19.5

3

3

3

3

AMODEL - TYRE B C D E F GOPT

OPT

OPT

OPT

OPT

OPT

OPT

OPTOPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPTOPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPTOPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPTOPT

OPT

OPT

OPT

THE RANGE:


mixing times.

POWERMIX PLUS MODELS ARE BUILT TO A HIGH CAPACITY YET COMPACTTWIN AUGER DESIGN.

30 P O W E R M I X B I O - S T A T I C P O W E M I X B I O - S T A T I C 31

POWERMIX BIO STATIC9-46m 3 Single Or Twin AugerDESIGNED WITH THE KNOWLEDGE GAINED FROM OVER TWENTY YEARSOF MANUFACTURING MACHINES FOR THE LIVESTOCK MARKET.

The Powermix Bio range of static mixers has been developed in conjunction with several UK biogas installation

companies to meet the specific needs of anaerobic digester operators.

As a result, they are built for longevity, serviceability,

mix quality and discharge consistency.

KEY FEATURESELECTRONIC SCALE SYSTEMSA choice of scale systems is available, offering

compatibility with existing control systems.

BOLT-IN STAINLESS STEEL TUB LINER

A bolt-in stainless steel liner is fitted to the floor and lower 1.5m tubwall. The floor section is 10mm thick and the sidewalls 8mm. Thisprevents corrosion and minimises wear as well as creating a cleansmooth surface for minimal power requirement. The tub base istreated with a zinc paint to prevent internal rusting. The liner can bereplaced in individual sections with minimal down time and nowelding required.

STAINLESS STEEL AUGERS

The augers are made from 15mm stainless steel with a further10mm stainless steel wear strip welded to the outer flight. Theyfeature three feed-out legs which help deliver material evenlyto the tub discharge point.

ADJUSTABLE STANDS

The twin auger chassis consists of eight adjustable legs connectedto the tub via load cells for easy installation and accurate weighing.

FULLY-MOUNTED INTEGRATED ELECTRICMOTORS AND PLANETARY GEARBOXES

Electric motors and planetary gearboxes are sourced accordingto the machine size and mounted as a unit to the underside of thetub to facilitate a simple installation.

S TAT I C M I X E R / I N D U C T I O N H O P P E R

DESIGNDELIVERYPERFORMANCESERVICE

e

t

y

W E R M I X B I O - SSSS TTTT AAAA TTTT IIII CCCC

g p j g

s to meet the specific needs of anaerobic digester operators.

t, they are built for longevity, serviceability,

y and discharge consistency.

GGNVVERYOORMANCEICE

THE RANGE:


mixing times.

POWERMIX PLUS MODELS ARE BUILT TO A HIGH CAPACITY YET COMPACTTWIN AUGER DESIGN.

30 P O W E R M I X B I O - S T A T I C P O W E M I X B I O - S T A T I C 31

POWERMIX BIO STATIC9-46m 3 Single Or Twin AugerDESIGNED WITH THE KNOWLEDGE GAINED FROM OVER TWENTY YEARSOF MANUFACTURING MACHINES FOR THE LIVESTOCK MARKET.

The Powermix Bio range of static mixers has been developed in conjunction with several UK biogas installation

companies to meet the specific needs of anaerobic digester operators.

As a result, they are built for longevity, serviceability,

mix quality and discharge consistency.

KEY FEATURESELECTRONIC SCALE SYSTEMSA choice of scale systems is available, offering

compatibility with existing control systems.

BOLT-IN STAINLESS STEEL TUB LINER

A bolt-in stainless steel liner is fitted to the floor and lower 1.5m tubwall. The floor section is 10mm thick and the sidewalls 8mm. Thisprevents corrosion and minimises wear as well as creating a cleansmooth surface for minimal power requirement. The tub base istreated with a zinc paint to prevent internal rusting. The liner can bereplaced in individual sections with minimal down time and nowelding required.

STAINLESS STEEL AUGERS

The augers are made from 15mm stainless steel with a further10mm stainless steel wear strip welded to the outer flight. Theyfeature three feed-out legs which help deliver material evenlyto the tub discharge point.

ADJUSTABLE STANDS

The twin auger chassis consists of eight adjustable legs connectedto the tub via load cells for easy installation and accurate weighing.

FULLY-MOUNTED INTEGRATED ELECTRICMOTORS AND PLANETARY GEARBOXES

Electric motors and planetary gearboxes are sourced accordingto the machine size and mounted as a unit to the underside of thetub to facilitate a simple installation.

S TAT I C M I X E R / I N D U C T I O N H O P P E R

DESIGNDELIVERYPERFORMANCESERVICE

AA

amue

JJ

te

LLOO

teo

SSTA

TTThhhe e a1000mmmfeatatutoto t thh

AADDJJ

The tto theh

FULLMOO

Electto thetub t

POWERMIX PRO TYREOPTIONS

POWERMIX PRO TYREOPTIONS Specification Specification

P O W E M I X P R O T Y R E O P T I O N S 3332 P O W E R M I X P R O T Y R E O P T I O N S

9-11 m SINGLE AUG. 425/40 B17 788 mm 425 mm

9-15 m SINGLE AUG. 385/55 R19.5 930 mm 385 mm

385/65 R22.5 1080 mm 385 mm

16-19 m TWIN 435/50 R19.5 928 mm 446 mm

AUGER/SINGLE AXLE 18R22.5 1160 mm 455 mm

275/75R17.5 Duals 780 mm 500 mm

16-22 m TWIN 385/55 R19.5 930 mm 385 mm

AUGER/TANDEM AXLE 385/55 R22.5 996 mm 386 mm

385/65 R22.5 1080 mm 385 mm

WIDE BODY 22-30 m 435/50 R19.5 928 mm 446 mm

MODEL TYRE HEIGHT WIDTH

385/55 R22.5Standard tyreon all tandemaxle machines.(16m-22m)

385/55 R22.5Standard tyreon all tandemaxle mach(16m-22m

demhines.

m)

435/50 R19.5Standard on twin auger single axle andall Wide Body tandem axle machinesand optional on all other twin augertandem axle machines

18R 22.5Optional on twin auger single axle

machines where a higher discharge

height is required

275/75 R17.5 (DUALS)Optional on single axle twin auger Plusmachines (16-20m) when a lower machineheight is required

STEERING AXLEOptional on all twin augertandem axle machines

425/40 R17For use on single auger machines toreduce height. Weight restrictions apply

385/55 R19.5Standard tyre on all single auger models

385/65 R22.5 SUPER SINGLEOptional on all single auger and twin augertandem axle machines when additionaldischargeheight isrequired.Axlespacersrequired

POWERMIX PRO TYREOPTIONS

POWERMIX PRO TYREOPTIONS Specification Specification

P O W E M I X P R O T Y R E O P T I O N S 3332 P O W E R M I X P R O T Y R E O P T I O N S

9-11 m SINGLE AUG. 425/40 B17 788 mm 425 mm

9-15 m SINGLE AUG. 385/55 R19.5 930 mm 385 mm

385/65 R22.5 1080 mm 385 mm

16-19 m TWIN 435/50 R19.5 928 mm 446 mm

AUGER/SINGLE AXLE 18R22.5 1160 mm 455 mm

275/75R17.5 Duals 780 mm 500 mm

16-22 m TWIN 385/55 R19.5 930 mm 385 mm

AUGER/TANDEM AXLE 385/55 R22.5 996 mm 386 mm

385/65 R22.5 1080 mm 385 mm

WIDE BODY 22-30 m 435/50 R19.5 928 mm 446 mm

MODEL TYRE HEIGHT WIDTH

385/55 R22.5Standard tyreon all tandemaxle machines.(16m-22m)

P O W E M I X P R O T Y R E O P T I O N S




height is required

275/75 R17.5 (DUALS)Optional on single axle twin auger Plusmachines (16-20m) when a lower machineheight is required


425/40 R17For use on single auger machines toreduce height. Weight restrictions apply

385/55 R19.5Standard tyre on all single auger models

385/65 R22.5 SUPER SINGLEOptional on all single auger and twin augertandem axle machines when additionaldischargeheight isrequired.Axlespacersrequired




height is required


275/75 R17.5 (DUALS)Optional on single axle twin a auger Plusmachines (16-20m) when a low wer machineheight is required

POWERMIXAUGER SPEEDS

POWERMIX OPTIONSScale & Hydraulic Controls Specification

P O W E R M I X A U G E R S P E E D S 3534 P O W E R M I X O P T I O N S

DG400 SCALE• Basic scale system counts up and down• Tare feature can be used to zero between ingredients

WIRELESS REMOTE SCALE HEAD• Mount in tractor or telehandler cab

DG600 SCALE• Programmable system• Exchange data between PC and scale• Record feed volume• Transfer data wirelessly or by USB stick

SINGLE AUGER (SINGLE SPEED) N/A 28 rpm 52 rpm

SINGLE AUGER (TWO SPEED) LOW 16 rpm 29 rpm HIGH * 52 rpm PRO - TWIN AUGER LOW 11 rpm 21 rpm HIGH * 37 rpm PLUS - COMPACT LOW 16 rpm 29 rpm HIGH * 52 rpm PLUS - WIDE BODY LOW 13 rpm 24 rpm HIGH * 43 rpm

PLUS - WIDE BODY LOW 12 rpm 22 rpm HIGH * 40 rpm

MODEL 2 SPEED540PTO INPUT

1000PTO INPUT

CORNER REAR DOOR

REAR DOOR• A centre-mounted rear door is available on Powermix Plus Compact models (16-22m)

* NOT RECOMMENDED

• A left hand rear corner door is

available for 22-30m “Wide Body”

Powermix Plus models

MANUAL VALVE BLOCKHYDRAULIC CONTROL

• Allows three hydraulic services to be operated from one spool valve

• Can be mounted to an adjustable arm on the mixer or to the tractor top link bracket

ELECTRICTWO-SPEEDCONTROL

ELECTRIC HYDRAULICCONTROLS• Gives precise, convenient control of three hydraulic functions using one spool valve

• Convenient, easy to use hand controller

• Optional incorporated conveyor speed control

STANDARDELECTRICCONTROL

ELECTRIC CONTROLWITH CONVEYORSPEED CONTROL

• Allows electric two-speed gear change on direct coupled machines

MANUAL VALVE BLOCKHYDRAULIC CONTROOL

• Allows three hydrau lic services to be operated from m one spool valve

• Can be mounted to an adjustable arm on thhe mixer or to the tracttor top link bracket

WIRELESS ELECTRICHYDRAULIC AND TWO-SPEEDCONTROL (PLUS ONLY)• Gives precise, accurate control of all hydraulic functions including belt speed and two-speed operation

TWIN AUGER (22-24m)

TWIN AUGER (16-22m)

TWIN AUGER (28-30m)

POWERMIXAUGER SPEEDS

POWERMIX OPTIONSScale & Hydraulic Controls Specification

P O W E R M I X A U G E R S P E E D S 3534 P O W E R M I X O P T I O N S

DG400 SCALE• Basic scale system counts up and down• Tare feature can be used to zero between ingredients

WIRELESS REMOTE SCALE HEAD• Mount in tractor or telehandler cab

DG600 SCALE• Programmable system• Exchange data between PC and scale• Record feed volume• Transfer data wirelessly or by USB stick

SINGLE AUGER (SINGLE SPEED) N/A 28 rpm 52 rpm

SINGLE AUGER (TWO SPEED) LOW 16 rpm 29 rpm HIGH * 52 rpm PRO - TWIN AUGER LOW 11 rpm 21 rpm HIGH * 37 rpm PLUS - COMPACT LOW 16 rpm 29 rpm HIGH * 52 rpm PLUS - WIDE BODY LOW 13 rpm 24 rpm HIGH * 43 rpm

PLUS - WIDE BODY LOW 12 rpm 22 rpm HIGH * 40 rpm

MODEL 2 SPEED540PTO INPUT

1000PTO INPUT

CORNER REAR DOOR

REAR DOOR• A centre-mounted rear door is available on Powermix Plus Compact models (16-22m)

* NOT RECOMMENDED

• A left hand rear corner door is

available for 22-30m “Wide Body”

Powermix Plus models

MANUAL VALVE BLOCKHYDRAULIC CONTROL

• Allows three hydraulic services to be operated from one spool valve

• Can be mounted to an adjustable arm on the mixer or to the tractor top link bracket

ELECTRICTWO-SPEEDCONTROL

ELECTRIC HYDRAULICCONTROLS• Gives precise, convenient control of three hydraulic functions using one spool valve

• Convenient, easy to use hand controller

• Optional incorporated conveyor speed control

STANDARDELECTRICCONTROL

ELECTRIC CONTROLWITH CONVEYORSPEED CONTROL

• Allows electric two-speed gear change on direct coupled machines

WIRELESS ELECTRICHYDRAULIC AND TWO-SPEEDCONTROL (PLUS ONLY)• Gives precise, accurate control of all hydraulic functions including belt speed and two-speed operation

TWIN AUGER (22-24m)

TWIN AUGER (16-22m)

TWIN AUGER (28-30m)

LIVESTOCK

FIN

D U

S:

SHELBOURNE REYNOLDSENGINEERING LTD.

SHEPHERDS GROVE, STANTON,BURY ST EDMUNDS,SUFFOLK, IP31 2AR

R E Y N O L D S

SHELBOURNE.COM

HARVESTINGGROUNDCARE

Date post:	08-Aug-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

P REYNOLDS...With Shelbourne Reynolds equipment, there’s no question of compromising machine...

Documents