+ All Categories
Home > Documents > P24C-PP (Cabinet Base with Plancha Griddle)Cabinet Base: Stainless steel cabinet base with a...

P24C-PP (Cabinet Base with Plancha Griddle)Cabinet Base: Stainless steel cabinet base with a...

Date post: 25-Mar-2021
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
Job Item# www.yatesgd.com www.yatesgraphicdesign.com STANDARD CONSTRUCTION SPECIFICATIONS 24" SECTIONAL RANGE Plancha Griddle Model P24N-PP P24N-PP (Modular Mount with Plancha Griddle) P24C-PP (Cabinet Base with Plancha Griddle) Standard Features • 24" wide sectional range with 17-3/4" width plancha griddle available with a cabinet base or as a modular unit (for mounting on countertop, refrigerated or freezer base) • Two 16,000 BTU NAT (15,500 BTU LP) burners with two control knobs • Battery spark ignition • 1/2" thick reinforced griddle plate • Side and rear splashers • 5" deep front rail • Increased capacity removable stainless steel grease drawer • Stainless steel front, sides, rear and exterior bottom • Fully insulated lining and burner box • 1-1/4" front gas manifold and 1" rear gas connection • 5" high stainless steel flue riser • Free battery-design assistance • (3) years limited parts and labor warranty (reference http:// www.southbendnc.com/#SBvservice.html for limited warranty details) Standard Features of Cabinet-Base Model • Stainless steel cabinet base with a removable door that can hinge on the right or the left. Exterior Finish: Front, sides, rear and exterior bottom constructed of #3 polished 430 and 304 stainless steel. Range: 18"-wide front-manifold sectional range includes 17-3/4" width 32,000 BTU NAT (31,000 BTU LP) griddle with side and rear splashers and grease drawer. Front Rail: 5" deep front rail. Flue Riser: 5" high stainless steel flue riser Battery: Unit can be in any position in a battery. If the unit is at the end of the battery, the end side will be solid (rather than have a coverplate over the end of the front manifold). Legs: 6" stainless steel adjustable legs standard. Cabinet Base: Stainless steel cabinet base with a removable door that can hinge on the right or the left. Printed in USA Form P24-PP Rev 2 (January/2016) Plancha units have a raised griddle plate for easy cleaning of cooking surface between loads. 3" wide collection on sides allow separation of waste for preparation of next fare. Plancha griddle is 1/2" thick reinforced steel plate powered by cast iron burners provides fast preheat and recovery time. High heat zone with max temperatures of 800°F located on front 2/3 of plate for quick sear with decreased temps on rear 1/3 of plate for product finishing. ** PLANCHA UNITS DO NOT ALLOW SPECIFIC TEMPERATURE OPERATION **
Transcript
Page 1: P24C-PP (Cabinet Base with Plancha Griddle)Cabinet Base: Stainless steel cabinet base with a removable door that can hinge on the right or the left. FormP24-PPRev2(January/2016) PrintedinUSA

Job Item#

www.yatesgd.com www.yatesgraphicdesign.com

Standard COnStrUCtIOn SPECIFICatIOnS

24" Sectional RangePlancha Griddle

Model P24N-PP

P24N-PP (Modular Mount with Plancha Griddle) P24C-PP (Cabinet Base with Plancha Griddle)

Standard Features

•24"widesectionalrangewith17-3/4"widthplanchagriddleavailable with a cabinet base or as a modular unit (for mountingoncountertop,refrigeratedorfreezerbase)

•Two16,000BTUNAT(15,500BTULP)burnerswithtwo control knobs•Batterysparkignition•1/2"thickreinforcedgriddleplate•Sideandrearsplashers•5"deepfrontrail• Increasedcapacityremovablestainlesssteelgreasedrawer•Stainlesssteelfront,sides,rearandexteriorbottom•Fullyinsulatedliningandburnerbox•1-1/4"frontgasmanifoldand1"reargasconnection•5"highstainlesssteelflueriser•Freebattery-designassistance• (3)yearslimitedpartsandlaborwarranty(referencehttp://www.southbendnc.com/#SBvservice.htmlforlimitedwarrantydetails)

Standard Features of Cabinet-Base Model•Stainlesssteelcabinetbasewitharemovabledoorthatcanhingeontherightortheleft.

Exterior Finish:Front,sides,rearandexteriorbottomconstructedof#3polished430and304stainlesssteel.

range: 18"-widefront-manifoldsectionalrangeincludes17-3/4"width32,000BTUNAT(31,000BTULP)griddlewithsideandrearsplashersandgreasedrawer.

Front rail: 5"deepfrontrail.

Flue riser: 5"highstainlesssteelflueriser

Battery: Unitcanbeinanypositioninabattery.Iftheunitisattheendofthebattery,theendsidewillbesolid(ratherthanhaveacoverplateovertheendofthefrontmanifold).

Legs:6"stainlesssteeladjustablelegsstandard.

Cabinet Base:Stainlesssteelcabinetbasewitharemovabledoorthatcanhingeontherightortheleft.

PrintedinUSAFormP24-PPRev2(January/2016)

Planchaunitshavearaisedgriddleplateforeasycleaningofcookingsurfacebetweenloads.3"widecollectiononsidesallowseparationofwasteforpreparationofnextfare.Planchagriddleis1/2"thickreinforcedsteelplatepoweredbycastironburnersprovidesfastpreheatandrecoverytime.Highheatzonewithmaxtemperaturesof800°Flocatedonfront2/3ofplateforquicksearwithdecreasedtempsonrear1/3ofplateforproductfinishing.

** PLanCha UnItS dO nOt aLLOw SPECIFIC tEMPEratUrE OPEratIOn **

Page 2: P24C-PP (Cabinet Base with Plancha Griddle)Cabinet Base: Stainless steel cabinet base with a removable door that can hinge on the right or the left. FormP24-PPRev2(January/2016) PrintedinUSA

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526(919) 762-1000 www.southbendnc.com

Models:

REAR VIEWFRONT VIEW

24" (610)

60"(1524)

41"(1041)

72"(1829)

5" Flue Riser

24" Flue Riser

36" Flue Riser

36"(914)

TOP VIEW

20"(508)

OptionalRear Gas

Connection

SIDE VIEW

37-1/2" (953)34" (864)

40" (1016)43-1/2" (1105)

10-1/2"(267)

33-3/4"(857)

5" (128)

SIDE VIEW of MODULAR MODEL

Front GasManifold

20-1/2"(521)

8-1/2" (216)

11-3/4"(298)

Optional Shelf

Optional extra-deep flue riser (cooking area issame as for models with standard flue riser).

6" (152)(+/- 1” tolerance)

37-1/2"(953)

22-5/8"(575)

11-1/4"(286)

17-3/4"(298)

P24N-PP P24C-PP

IntEndEd FOr COMMErCIaL USE OnLY. nOt FOr hOUSEhOLd USE.

OPtIOnS and aCCESSOrIES

MISCELLanEOUSUtILItY InFOrMatIOn

GaS:Eachunithasa1-1/4"frontmanifoldthatcouplestotheadjacentsectionalunit(s),anda1"reargasconnectionwithamaleNPTconnector.Minimumgassupplypressureis7"W.C.fornaturalgasand11"W.C.forpropane.Allsectionalunitsrequirearegulatedgassupply(apressureregulatormustbeorderedseparately).Ifusingaflexible-hosegasconnection,theinsidediameterofthehosemustnotbesmallerthantheconnectorontheunitandmustcomplywithANSIZ21.69,providinganadequatemeansofrestrainttopreventunduestrainonthegasconnection.

• Ifcastersareusedwithaflexible-hosegasconnection,arestrainingdeviceshouldbeusedtopreventunduestrainon the hose.

•Minimumclearancefromnoncombustibleconstructioniszero.Minimumclearancefromcombustibleconstructionis10"(254mm)onsidesand12"(305mm)onrear.

• Installationunderaventedhoodisrecommended.•Checklocalcodesforfireandsanitaryregulations.

nOtICE:Southbendhasapolicyofcontinuousproductresearchandimprovement.Wereservetherighttochangespecificationsandproductdesignwithoutnotice.Suchrevisionsdonotentitlethebuyertocorrespondingchanges,improvements,additionsorreplacementsforpreviouslypurchasedequipment.

ExternalpressureregulatorFrontrailoptions:Cutoutsinfrontrailforsaucepans7-1/4"deepfrontrail(tomatchold

stylesectional)Squarebellybarmountedon

7-1/4"deepfrontrail

Casters (front two casters lock) Cable restraint kit (to restrict

movement when on casters)24"or36"highflueriserShelvesonflueriser(oneon24"flue

riser,oneortwoon36"flueriser,10"deep)

Trayortubularshelves(12"deep)Open-framebasewithcastersfor

batteryExtra-deeprear-extendingflueriserRemovableshelfinsidecabinet

FormP24-PPRevRev2(January/2016)

Dimensions shown in inches and (millimeters)

Shipping Crate DimenSionS & Weight

moDel WiDth height Depth Volume Weight

P24N-PP 39"(991)

21"(533)

44"(1118)

20.9 cu ft(0.59 cu m)

250 lbs(113.4 kg)

P24C-PP 39"(991)

45"(1143)

44"(1118)

44.7 cu ft(1.27 cu m)

330 lbs(149.7 kg)

ModelGas (BTU/hour)

Natural Propane

P24N-PP 32,000 31,000

P24C-PP 32,000 31,000

Solid shelving has a depth of 10".

Tubed and Tray shelving have a depth of 11-1/8".


Recommended