PAC-5000

DIGITAL 2BUS PA COMBINATION SYSTEM

Saving space for installation and budget It has most of the functions and diversified sound sources in an existing broadcasting system with only one unit, which can economize an installing space and cut down on budget. (Built-in function : TUNER / MEDIA (CD, DRP, USB) / ES/ PS / PX / AMP / RG).

Simultaneous broadcasting of different 2 groups Mounted two amplifiers (120W + 120W) with high impedances offer a BGM broadcast with two different sound sources by dividing Group A and Group B. Full Digital Amplifier adopted in the system reduced the whole weight, a power consumption and a temperature increase in operation.

System extension function It is convenient to expand the system as the sound source can be shared through LINK-IN/OUT terminal, which 4 units of SLAVEs at maximum can be connected through additionally. (MASTER 1unit, SLAVE 4unit)

Digital processing & digital amplifier Adopting the full Digital Amplifier enables to lower overall weight, power consumption and temperature rise during operation.

Selectable for the 24 channel zones The system provides 24 channel zone selection, which can be controlled by 2 groups. Total zone can be expanded up to 120 channels by system expansion.

Fire detection and emergency broadcasting The system provides 24 channel sensor input terminals for automatic fire alarm broadcasting. It also provides the recording function of fire alarm message for fire alarm broadcasting.

SR-100 Remote Mic 4unit of SR-100 remote MIC at maximum can be connected with 1unit of system. SR-100 connected to RM-1 terminal is available to expand up to 120 zone with 8unit of SR-100KP keypad (12 zone per 1unit).

Compatible with input port 5 channel of XLR input terminal are selectable to receive all of MIC and LINE signal. It is possible to connect with various input signal since all of 5channel provides phantom power.

External equipment control It provides PD/ EM terminal to control external equipment. So you can control the operation of external equipment by using output contact from EM terminal in emergency mode and from PD terminal during broadcast output.

Emergency power and battery charging The system provides the battery connecting terminal and the battery charging function to supply the emergency power.

Various sound sources FM tuner and CD/USB/DRP (flash memory) player are mounted, and there is AUX (1, 2) and OPTICAL (IN/OUT). You can conveniently use various source. (CD-MA, MP3, WMA)

CD Playback and copy (saving the lifetime of the CD mechanism)

This function is used to copy music in a CD into inner memory or USB memory. You can greatly save the lifetime of the CD mechanism.

USB Playback and copy Recording contents of a CD in USB memory and playing contents of USB memory is available.

Built-In memory (DRP) playback and copy The contents of DRP memory can be played. After copying the sound source making frequent use in a CD or USB, you can continue to use without playing the different source and copy to USB as well.

Chime function Convenient to use to guide broadcasting before or after broadcasting since it is built-in 2 kinds of chime.

PC Program support With the PC program supplied additionally, It is easy to control the front panel functions of the system

PC Reseravation broadcast It is the function that is available only in PC program which is of timer playback function that outputs a sound source stored in PC to corresponding area.

MIC Priority It is possible to broadcast priority without work by blocking the signal of different channel automatically since MIC 1channel is high priority.

Built-in monitor speaker You can check broadcast output status through a monitor speaker as it has a built-in monitor speaker. You can control the monitoring level aside from main output volume.

EM Mic The system provides the EM MIC which is installed on the front panel. It is easy to use the EM MIC for fire alarm broadcasting.

EQ Mode You can correct the frequency of all broadcasting source including BGM, which output from the selective button of EQUALIZER MODE and VOLUME CONTROL button .

Support with remote control You can use AMX or CRESTRON control system with this interface by RS-232 port.

| System Features | | Sound Source Playback |

| User Convenience |

FEATURES

PAC-5000

Digital 2bus PA Combination System

FRONT / REAR PANEL

1 Power switch

2 Group a/b button

3 Normal/emergency button

4 Speaker zone selection button

5 Siren button

6 Monitor speaker selection button

7 Chime button8 Emergency broadcasting test button

9 Input display led

10 Input selection button

11 Mic selection button and display led

1 Power input (ac inlet)

2 Dc power input and battery charge terminal

3 Speaker output terminals

4 Amp output / input terminal

5 Ex chime / fire com terminal

6 Control out terminal

7 Unswitched ac power input terminal8 Main power switch

12 Input level volume

13 Main volume

14 Volume adjust selection button

15 Disc tray

16 Eject button17 Usb terminal

18 Em mic and operating switch

19 Cd, drp, usb selection button

20 Group button

21 Random button

22 Repeat button

9 Post output terminal

10 Rs-232 terminal

11 Remote mic connecting terminal12 Line/mic input terminal and input selection switch

13 Link in/link out terminal

14 Address setting switch

15 Rec mic input terminal

16 Aux input terminal

23 Cd, Drp, Usb Copy Button

24 Delete Button

25 Display

26 Track/Frequency Selection Button27 Tune Exploration/Frequency Move Button28 Playback/Pause / Fm Mute Button

29 Stop/Frequency Saving Button30 Number Input Button For Track/Frquency31 System Operational Indicator

(Em, Fire, Pc, Rm, Bgm)

17 Rec output terminal

18 Fm antenna terminal

19 Fm antenna terminal20 Em rec button21 Pc audio input terminal

22 Fire sensor input terminal

23 Contact/audio input terminal

PAC-5000

Digital 2bus PA Combination System

SR-100 SR-100KP

| Remote MIC |ㆍsupply data, audio, dc power with one cat 5 cable

ㆍable to use 24 channels basically, when the expasion key

Pad is added you can able to use 120 channels

ㆍ built-in chime source

ㆍ whole zone broadcasting and monitoring

ㆍ exterior source delivery through rear aux terminal

2

3

4

5

6

7

15 16

17

1819 20

21 22

23 24

2526

28

27

29

26

28

30

31

8

9

10

13

14

1112

1

2

3

45

6

7

15 16 17

18

19 20

21

22

23

8

9

10 1314

11

12

1

SPECIFICATIONS / DIMENSIONS

PAC-5000POWER AMP (AUX IN @ 1kHz, 100V/83Ω LOAD OUTPUT)

Rated Output (@ T.H.D 1%, GROUP A + GROUP B) 120W + 120W

Input Sensitivity -10dBV / 10kΩ

S/N (20kHz LPF, A-WTD) Better than 75dB

EQ Control (250Hz, 1kHz, 7kHz) ±10dB

Frequency Response (1W Power Output, ±3dB) 100Hz-18kHz

MIC/LINE 1~5CH (MIC/LINE IN @ 1kHz, POST OUT, MIC/LINE VR Max. Master VR Max.)

MIC Input Sensitivity -55dBV / 10kΩ

MIC S/N (20kHz LPF, A-WTD) Better than 55dB

MIC Frequency Response (±3dB, 80kHz LPF) 120Hz-10kHz

MIC Phantom Power +24V

MIC T.H.D (20kHz LPF) Less than 0.5%

LINE Input Sensitivity -10dBV / 10kΩ

LINE S/N (20kHz LPF, A-WTD) Better than 65dB

LINE T.H.D (20kHz LPF) Less than 0.3%

CD (TEST CD 0dB, 1kHz @ REC OUT, CD VR Max. Master VR Min.)

S/N (20kHz LPF, A-WTD) Better than 80dB

Frequency Response (±3dB, 80kHz LPF) 100Hz-20kHz

TUNER (FM, 22.5kHz MOD @ REC OUT, TUNER VR Max. Master VR Min.)

S/N (20kHz LPF, A-WTD) Better than 60dB

Frequency Response (±3dB, 80kHz LPF) 120Hz-12kHz

OUTPUT LEVEL (AUX IN, INPUT -10dB/1kHz)

REC OUT (AUX VR Max. Master VR Min.) -10dBV / 600Ω

POST OUT (AUX VR Max. Master VR Max.) 0dBV / 600Ω

LINK IN/OUT , REMOTE MIC (RM 1~RM 4) INTERFACE

Configuration RS-485 Serial

Interface Distance ≤200M

Cable Type Category 5 UTP Cable

Priority Control EM > FIRE > PC AUDIO > REMOTE MIC > MIC 1, SIREN, CHIME > MIC 2~5, BGM

Fire Sensor 24CH

Operation temperature -10°C ~ +40°C

Power Source AC 220V 60Hz, DC 24V

Power Consumption 750W

Weight (SET) 16kg / 35.3lb

Dimension (SET) 482(W) × 177(H) × 373(D)mm / 19(W) × 7(H) × 15(D)in

| Dimensions |

482mm

440mm

177m

m

373m

m

PAC-5000

| Specifications |

Inter-M Corp. (IMK)653-5 Banghak-Dong, Dobong-Ku, Seoul, KoreaOverseas Sales TeamTel_ +82-2-2289-8141~7 Fax_ +82-2-2289-8149 E-mail_ overseas@inter-m.com www.inter-m.com

* Design and specification are subject to be changed without pre notice.