+ All Categories
Home > Documents > Package Contents 1Physical Description...E-mail: [email protected] Service time: 9:00 to 21:00,...

Package Contents 1Physical Description...E-mail: [email protected] Service time: 9:00 to 21:00,...

Date post: 27-Jul-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
2
Physical Description 1 Quick Installation Guide MODEL NO. TL-R600VPN Package Contents QIG TL-R600VPN Resource CD Ethernet Cable TL-R600VPN Hardware Connection 2 Connect the WAN port of the router to the cable or DSL modem via Ethernet cable. • Front Panel • Back Panel • LED Descriptions SYS PWR Name Status WAN, LAN Indication On (Green) The router is powered off On/Off Flashing (Green) The router has a hardware error The router works properly PC Configuration 3 Internet Protocol Select “Internet Protocol (TCP/IP) ”/“ Version 4 (TCP/IPv4)” and click “ Properties ”. 2 2 3 3 Select “Obtain an IP address automatically ” and “ Obtain server address automatically”. Then click “OK”. For Windows 7/Vista For Windows XP/2000 For Windows 7/Vista Click “ StartControl PanelFor Windows XP/2000: 1 1 Network and Internet ConnectionsNetwork Connections”, and . Click “StartFor Windows Vista/7: Control PanelConnect one end of the AC power cord to the AC power socket on the router, and the other end into an electrical outlet. The router will work automatically and the LED will display as the LED Descriptions shown. Connect a LAN port of the router to the computer by Ethernet cable. The router is powered on Off View network status and tasks”. For Windows Vista For Windows 7 Click “View StatusClick “Local Area Connectionthen find Local Area Connectionicon and right click it. Then Power Cord Here we take the ADSL modem Internet 1 2 3 click “Properties”. The provided power cord may differ from the figure above due to local power specifications. On (Green/Yellow) There is a device linked to the corresponding port but not active (Green light indicates the linked device is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.) Flashing (Green/Yellow) The corresponding port is transmitting or receiving data (Green light indicates the linked device is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.) There is no device linked to the corresponding port Off For Windows XP/2000 DNS TL-R600VPN TD-8816 TP-LINK as an example. from For Windows Vista/7, click “Properties” on the Pop-up after the steps above. Gigabit Broadband VPN Router Gigabit Broadband VPN Router 7106504437 REV2.0.0
Transcript
Page 1: Package Contents 1Physical Description...E-mail: support.tr@tp-link.com Service time: 9:00 to 21:00, 7days a week Italy Tel: +39 023 051 9020 Fee: Depending on rate of di˛erent carriers.

Physical Description1

Quick Installation Guide

MODEL NO. TL-R600VPN

Package Contents

QIG

MODEL NO. TL-R600VPN

Resource CD

Ethernet Cable

TL-R600VPN

Hardware Connection2Connect the WAN port of the router to the cable or DSL modem via Ethernet cable.

• Front Panel

• Back Panel

• LED Descriptions

SYS

PWR

Name Status

WAN, LAN

Indication

On (Green)The router is powered o�

On/O�

Flashing (Green)

The router has a hardware error

The router works properly

PC Con�guration3Internet Protocol Select “Internet Protocol (TCP/IP)” ”/“

Version 4 (TCP/IPv4)” and click “ Properties”.2

2

3

3

Select “Obtain an IP address automatically ” and “Obtain server address automatically ”. Then click “OK”.

For Windows XP/2000 For Windows 7/Vista

For Windows XP/2000 For Windows 7/Vista

Click “Start” “Control Panel”For Windows XP/2000: 11 “Network and Internet Connections” “Network Connections”, and .

Click “Start”For Windows Vista/7: “Control Panel”

Connect one end of the AC power cord to the AC power socket on the router, and the other end into an electrical outlet. The router will work automatically and the LED will display as the LED Descriptions shown.

Connect a LAN port of the router to the computer byEthernet cable.

The router is powered onO�

“View network status and tasks”.

For Windows Vista For Windows 7

Click “View Status” Click “Local Area Connection”

then find “Local Area Connection” icon and right click it. Then

Power Cord

Here we take the ADSL modem

Internet

12

3

click “Properties”.

The provided power cord may differ from the figure abovedue to local power specifications.

On (Green/Yellow)

There is a device linked to the corresponding port but not active (Green light indicatesthe linked device is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.)

Flashing (Green/Yellow)

The corresponding port is transmitting or receiving data (Green light indicates the linked device is running at 1000Mbps, and yellow indicates the linked device is running at 10/100Mbps.)

There is no device linked to the corresponding portO�

For Windows XP/2000

DNS

TL-R600VPNTD-8816

TP-LINK as an example.from

For Windows Vista/7, click “Properties” on the Pop-up after the steps above.

Gigabit Broadband VPN Router

Gigabit Broadband VPN Router

7106504437 REV2.0.0

Page 2: Package Contents 1Physical Description...E-mail: support.tr@tp-link.com Service time: 9:00 to 21:00, 7days a week Italy Tel: +39 023 051 9020 Fee: Depending on rate of di˛erent carriers.

4

Appendix: Troubleshooting

1 2

Open web browser and type in http://192.168.0.1. PressEnter button and then enter the User name and Password (Factory Default: admin/admin), and click Login.

After a successful login, select the Quick Setup tab onthe left of the main menu and the “Quick Setup” screenwill appear. Then click Next.

Select the appropriate connection type according to the information from your ISP. Then click Next.

Dynamic IP: If you choose Dynamic IP, the router will automatically obtain the IP parameters from your ISP.

With the router powered on, use a pin to press and hold theRESET button (about 5 seconds) until the SYS LED lights up and �ashes quickly. And then release the button and wait forthe router rebooting to its factory default settings.

You can restore the router to factory defaults. The default management address of the router is http://192.168.0.1, thedefault username and password are both admin. All your current settings will be cleared after the router is restored. If you have backup con�guration, please import it now.

Why does the PWR LED work abnormally?

The PWR LED should be lit up when the power system works normally. If the PWR LED worked abnormally, please check as follows:

1) Make sure that the power cable is connected properly, and the power contact is normal.

2) Make sure the voltage of the power supply meets the requirement of the input voltage of the router.

Why does the page display abnormally?

Please check as follows:

1) Update your browser or replace it with another browser, and try again.

2) If the pop-up is blocked, please lower the security level of the browser.

What should I do if I could not access the

You are recommended to check the following items:

1) Check every port LED on the router and make sure the cable is installed properly.

2) Try another port on the router and make sure the cable meets the requirement and works normally.

3) Turn o� the power. After a while, turn on the power again.

Make sure the IP address of your PC is set within the subnet of the router.

4)

If you still cannot access the con�guration page, pleaserestore the router to its factory defaults. Then the IP address should be set as 192.168.0.x (“x” is any number from 2 to 254) and Subnet Mask as 255.255.255.0.

5)

TP-LINK TECHNOLOGIES CO., LTD. www.tp-link.com

PPPoE: If you choose PPPoE, enter the User Name and Password provided by your ISP. Then click Next.

Login Connect to Internet

For other connection type, you can go to “Network”

What could I do if I forget the user name andpassword of the router?

Static IP: If you choose Static IP, type in the IP address information provided by your ISP. Then click Next.

Now you can see the following screen. Click Finish to completethe quick installation.

“WAN ”.

Auto-Detect: If Auto-Detect is chosen, the router willdetect the connection type provided byyour ISP automatically.

Technical Supportwww.tp-link.com/en/support/faq

For all other technical support, please contact us by using the following details:

For more troubleshooting help, go to To download the latest Firmware, Driver, Utility and User Guide, go tohttp://www.tp-link.com/en/support/download/

Singapore

Tel: +86 755 2650 4400Fee: Depending on rate of di�erent carriers, IDD.E-mail: [email protected] time: 24hrs, 7 days a week

Tel: +65 6284 0493Fee: Depending on rate of di�erent carriers.E-mail: [email protected] time: 24hrs, 7 days a week

Tel: +44 (0) 845 147 0017Fee: Landline: 1p-10.5p/min, depending on the time of day. Mobile: 15p-40p/min, depending on your mobile network.E-mail: [email protected] time: 24hrs, 7days a week

Germany / Austria Tel: +49 1805 875 465 (German Service) +49 1805 TPLINK +43 820 820 360Fee: Landline from Germany: 0.14EUR/min. Landline from Austria: 0.20EUR/min.E-mail: [email protected] Time: Monday to Friday, 09:00 to 12:30 and 13:30 to 18:00. GMT+1 or GMT+2 (DST in Germany) * Except bank holidays in Hesse

USA / CanadaToll Free: +1 866 225 8139E-mail: [email protected](USA) [email protected](Canada)Service time: 24hrs, 7days a weekMalaysiaToll Free: 1300 88 875 465E-mail: [email protected] time: 24hrs, 7days a week

Russian FederationTel: 8 (499) 754 5560 (Moscow NO.) 8 (800) 250 5560 (Toll-free within RF)E-mail: [email protected] time: From 9:00 to 21:00 (Moscow time)*Except weekends and holidays in RF

Tel: (+62 )021 6386 1936Fee: Depending on rate of di�erent carriers.E-mail: [email protected] time: Sunday to Friday, 09:00 to 12:00, 13:00 to 18:00 *Except public holidays

SwitzerlandTel: +41 (0) 848 800 998 (German Service)E-mail: [email protected]: 4-8 Rp/min, depending on rate of di�erent timeService time: Monday to Friday, 09:00 to 12:30 and 13:30 to 18:00. GMT+ 1 or GMT+ 2 (DST)

Indonesia

Australia / New Zealand

Turkey

Tel: AU 1300 87 5465 (Depending on 1300 policy.) NZ 0800 87 5465 (Toll Free)E-mail: [email protected] (Australia) [email protected] (New Zealand)Service time: 24hrs, 7 days a week

Tel: 0850 72 444 88(Turkish Service)Fee: Depending on rate of di�erent carriers.E-mail: [email protected] time: 9:00 to 21:00, 7days a week

ItalyTel: +39 023 051 9020Fee: Depending on rate of di�erent carriers.E-mail: [email protected] time: Monday to Friday, 09:00 to 13:00; 14:00 to 18:00

Tel: 0 800 505 508Fee: Free for Landline; Mobile: Depending on rate of di�erent carriersE-mail: [email protected] time: Monday to Friday 10:00 to 22:00

Toll Free: 0800 608 9799 (Portuguese Service)E-mail: [email protected] time: Monday to Friday, 9:00 to 20:00; Saturday, 9:00 to15:00PolandTel: +48 (0) 801 080 618 +48 223 606 363 (if calls from mobile phone)Fee: Depending on rate of di�erent carriers.E-mail: [email protected] time: Monday to Friday 9:00 to 17:00GMT+1 or GMT+2 (DST)FranceTel: 0820 800 860 (French service)Email: support.fr @tp-link.comFee: 0.118 EUR/min from FranceService time: Monday to Friday, 9:00 to 18:00 *Except French Bank holidays

UK

Global

Ukraine

Brazil

How do I restore my router's con�guration to its factory default settings?


Recommended