Date post: | 28-Mar-2015 |
Category: |
Documents |
Upload: | malik-carlisle |
View: | 212 times |
Download: | 0 times |
Packaging
SECUPAC
Eric Janssens October 2005
Function of packaging
Protects film:
• during:- transport- storage
• from:- light- mechanical damages- mechanical pressure- humidity- dust contamination
SECUPAC: Advantages
Immobilization of film sheets
• Easy manipulation (rigid block)
• No risk for black line abrasion Bag is stronger, better protection Absolute humidity barrier Reduce amount cardboard waste (volume and
height)
Stack height is (depending size) 48 or 2 x 38 boxes per pallet
Cosmetics
Inner packaging
Bag protects against: light humidity exchange friction damage23 µm PET
7 µm Aluminum12 µm OPA80 µm black LDPE
Film
Polypropylene plate (x 2) protects against damages improve stiffness
Shrink foil dust separator / collector
Inner packaging : vacuum packed
VacuumedDouble welded sealingIdentification labelShrink wrapped
Outer packaging: Sleeve (50 or 100 sheets)
Outer packaging: Sleeve (50 or 100 sheets)
Outer packaging: label
Film type
Darkroom illumination
Article code
Film Size : metric + imperial
Number of films per pack
Production batch number
Cutting batch number
Expiration date
Inner label
Film Size : metric + imperial Production batch numberCutting batch numberExpiration date
Film typeArticle code
Inner label is: peelable and re-applicable dustfree
Inner packaging: set-up
Sizes:
≥ 30 x 40 cm and ≤ 26” x 32”: Secupac (Q1 ’05)
≤ 26” x 32” and < 80 x 110 cm: Secupac (Q2 ’06)
other sizes packing remains unchanged
Packaging:≤ 20” x 24” per 100 sheets> 20” x 24” per 50 sheets
Recommended working method
Transport, storage & unpacking
Transport and store film horizontally
Transfer film from warehouse to grey zone
Open the sleeve in the grey zone and remove it
Open the shrink foil gently and remove it• The shrink foil is not antistatic, so it attracts and holds
dust (prevent contamination of the inner packaging)• Don’t crumple up the shrink foil to avoid the dust
from getting airborne
Take the inner packaging to plotter room
Recommended working method
Acclimatizing & loading
Acclimatize pack per pack unopened for at least 8 hours
Open the inner packaging (bag) (re-use label)
Take the top PP sheet away and remove it
Load the plotter with as many sheets as you can handle• Avoid: scratching, folding, cracking pressure marking
Store the remaining film sheets in a film safe
Recommended working method
Safe film Safe
Chemistry Packaging
Developer and fixer are packaged:• 4 x 5 litres• 4 x 60 litres
Conclusions
Secupac• Easier and safer to handle• Better protection • Reduced waste• Better stack height • Better looking
Secupac to Secure Your Business