+ All Categories
Home > Documents > Packet Optimized Optical Transport Solutions A Practical Design and Implementation Approach Marc...

Packet Optimized Optical Transport Solutions A Practical Design and Implementation Approach Marc...

Date post: 18-Dec-2015
Category:
Upload: samantha-miller
View: 212 times
Download: 0 times
Share this document with a friend
24
Packet Optimized Optical Transport Solutions A Practical Design and Implementation Approach Marc Teichtahl [email protected] [email protected]
Transcript

Packet Optimized Optical Transport Solutions

A Practical Design and Implementation Approach

Marc Teichtahl

[email protected]

[email protected]

Packet Optimized Optical Transport Solutions

Presentation overview

• Design overview• Why packet rings ?• Current designs• Removing the transport layer• DTP basics• Robustness and resilience• Aplanned case study

Packet Optimized Optical Transport Solutions

Design Overview

Design Brief

“effect the migration from traditional transmission technologies to a next generation platform optimized for the transmission of purely packetized data”

Packet Optimized Optical Transport Solutions

Why packet rings ?

•Reduction in capital expenditure

•No more SDH/SONET ADM’s

•More efficient use of bandwidth

•statistical multiplexing and spatial resuse

•Single management infrastructure

Packet Optimized Optical Transport Solutions

Current Design

OC-3

POS

OC-3

POS

ADMADM

ADM

ADM

SDH Tributaries

Packet Optimized Optical Transport Solutions

Whilst robust, this design tends to be inefficientwhen dealing with purely packetized data

•Dedicated protection time slots reserve half the ring at all times.

•Fixed size Point to Point circuits provisioned regardless of actual bandwidth use.

•Cost and complexity reduced as we remove transport layers from the network.```

Packet Optimized Optical Transport Solutions

ADMADM

Provisioned Circuit

Working

Protection

Packet Optimized Optical Transport Solutions

Removing the transport layers

Optical Optical Optical Optical

SONET ATM SONET

ATM

IP

IP IP

IP

Lower Cost, Complexity, & Overhead

Traditional

IP Over ATM POS

IP-OG

Today

Tomorrow

Packet Optimized Optical Transport Solutions

DPT Basics

Out

er r

ing

data

Outer ring control

Inner ring data

Inner Ring Control

Packet Optimized Optical Transport Solutions

2 Rings - Inner and Outer

•Data and control in opposite directions

•Both fibers used concurrently

•Accelerated control propagation for adaptive bandwidth utilization and self-healing.

Packet Optimized Optical Transport Solutions

Framing

•Utilizes SONET/SDH framing

•Runs over all key fiber transport technologies•Dark Fiber•WDM•SONET/SDH point to point and ring

Packet Optimized Optical Transport Solutions

Bandwidth Multiplication

•Spatial re-use - SRP

Traditional ring technologies use source stripping. This is in efficient, SRP uses destination stripping.

Destination stripping allows the destination node to remove the packet from the ring freeing up bandwidth on other non-related paths.

Packet Optimized Optical Transport Solutions

Bandwidth Multiplication

•Dual Fiber

Both fibers carry “working” traffic.

This is unlike SONET which uses dedicated protection bandwidth.

Implemented in an existing network DTP can yield 1:2 (x2) bandwidth multiplier.

Packet Optimized Optical Transport Solutions

Bandwidth Multiplication

•Statistical Multiplexing

No TDM and no provisioned circuits

Provides for statistical over subscription

Can handle elastic burst requirements

Packet Optimized Optical Transport Solutions

Robustness and Resilience

•Intelligent Protection Switching (IPS)

Proactive monitoring and and self-healing throughstandard SONET/SDH overhead bytes.

50ms self-healing layer 1 wrapping

Protection switching hierarchy for multiple concurrent failures

Packet Optimized Optical Transport Solutions

Robustness and Resilience

•Intelligent Protection Switching (IPS)

Doesn’t rely on SONET overhead bytes allowing foruse non-SONET infrastructure such as WDM

50ms IP restoration

Multi-layer aware, the router can now see all 3 layers

Packet Optimized Optical Transport Solutions

A planned case study

4 Phase implementation plan

•Single node SDH tributary

•Semi-Hybrid transport network

•Hybrid network

•Full DPT network

Packet Optimized Optical Transport Solutions

Single node SDH tributarySDHDPT

IP

Packet Optimized Optical Transport Solutions

Semi-Hybrid transport network

SDHDPT DPT

IP END TO END

Packet Optimized Optical Transport Solutions

Hybrid network

IP only

IP only

Packet Optimized Optical Transport Solutions

Full DPT network

IP ONLY END TO ENDTRANSPORT LAYER IS COMPLETELY TRANSPARENT

OC-12

OC-12

OC-12

OC-12

Packet Optimized Optical Transport Solutions

Amsterdam

Den Haag

Rotterdam

Antwerp

Brussels

OC-12

OC-12

OC-12OC-12

Packet Optimized Optical Transport Solutions

Amsterdam

Den Haag

Rotterdam

Antwerp

Brussels

OC-12

OC-12

OC-12OC-12

3 phase implementation

• Semi-hybrid trial Amsterdam -> Brussels Point to point

• Hybrid trial Amsterdam -> Brussels Loop

•Full DTP Full DTP loop

Packet Optimized Optical Transport Solutions

Presentation available atPresentation available at

ftp://ftp.layerthree.com/pub/nanog16.pptftp://ftp.layerthree.com/pub/nanog16.ppt

email meemail me

[email protected]@layerthree.com


Recommended