EN 1090-1
Engineering, Manufacturing, Industrial Construction & Maintenance ReferencesSOCOMENIN
www.socomenin.com.tn
Oil & GasPetrochemical
References
0201
Industrial Construction & Maintenance Division:Manufacturing Division:
SOCOMENIN is specialized in Manufacturing of the following products:
- Pressure vessels: Skid Separators, Columns, Bullets ,Strippers, KO Drums,Scrubbers. Storage tanks : Conical - Open top and Dome roof - Offshore Equipments & Modules: Conductor- Supported Platforms, Subsea struc- tures- Steel Structures and Pipe Racks- Heat Exhangers- Stacks & Flares
SOCOMENIN is the leader of steel equipment manufacturing companies in NorthAfrica. SOCOMENIN involved in the Construction & Maintenance of various projects
Water Industry
Oil & Gas and Petrochemical
Power Generation & Renewable and Other Industries
Chemical & Mineral Industries
Food Industry
Iron & Steel Industries
0403
Design , Supply and Fabrication of Z5105 stabilization package for the ASHTART REVAMPING PROJECT.SEREPTETAP & PERENCO (Tunisia)2010
Project:
Client:Owner:
Year:
Design , Supply , Fabrication and Delivery of 09 storage Bullets (Propane , Pentane & Butane ): Ø : 4.5m, L : 33 m, C : 500 m3, Weight : 04*120 Tons / 05* 160 Tons, for the Nawara Develop-ment Project – GTP in GabesTDEETAP & OMV (Tunisia)2015/2016
Project:
Client:Owner:
Year:
Design , Supply , Fabrication and Delivery of 24 pressure vessels according to ASME code & ARH for Touat gas project.TECNICAS REUNIDASSONATRACH (Algeria)2015
Project:
Client:Owner:
Year:
0605
Design , Supply , Fabrication and Delivery of 10 presure vessels for the Nawara Development Project – GTP in GabesABBETAP& OMV ( Tunisia)2016
Project:
Client:Owner:
Year:
Design , Supply and Fabrication of Three phases Horizontal Separator & Steel Structure – Liawenda project – PERENCOMG GroupPerenco (Congo)2013
Project:
Client:Owner:
Year:
Design , Supply and Fabrication of 6 skid mounted separators and one degassing boot.PEERLESS EUROPEGulf Arabian Company (Libya)2008/2009
Project:
Client:Owner:
Year:
Design , Supply and Fabrication of 51 chemical tanks for new injection skids.Waha Oil Company (Libya)2018
Project:
Owner:Year:
0807
KO Drum , Closed Drain Vessel and Cryogenic Flare KO Drum for the Nawara Development Project – GTP in Gabes TDEETAP& OMV (Tunisia)2015
Project:
Client:Owner:
Year:
Design , Supply , Fabrication and Delivery of Hot oil surge Drum according ASME code ( Ø 4.6 – L 20 m ) for HASDRUBAL project.WORLEY PARSONSBRITISH GAS (Tunisia)2008
Project:
Client:Owner:
Year:
Design , Supply and Fabrication of 18 Pressure Vessels accor-ding to ASME stamp (with 02 Pressure Vessels Ø: 2600 L: 8200 TH: 38mm with Heat treatment ) for HASDRUBAL gas treatment projectPETROFAC BRITISH 2007/2008
Project:
Client:Owner:
Year:GAS (Tunisia)
Design , Supply and Fabrication of 15 pressure vessels 42m3 and 03 pressure vessel 30m3 for RTO project.MB FLUIDSONATRACH (Algeria)2015
Project:
Client:Owner:
Year:
1009
Supply , Prefabrication and construction of a complete unit of gas oil separator (G. O. S. P.) At SIDI EL-KILANI / SOUASSI- ETAPKUFPEC (Tunisia)1994
Project:
Owner:Year:
Design , Supply and Fabrication of equipments ( columns,
type gas dehydration unit at El Borma BILFINGER EMS GMBH SITEP (Tunisia)2012
Project:
Client:Owner:
Year:
Design , Supply and Fabrication of 01 HP KO Drum & 01 LP KO Drum for Nawara Project- OMV / ETAPFIVESETAP& OMV ( Tunisia)2016
Project:
Client:Owner:
Year:
Engineering, Procurement, Construction, and Installation Guebiba station Process & Flaring improvement ( Flare H 27 m , LP Flare Knock-Out Drum , Instrument Air Buffer Drum, Second Stage Separator ,HP Flare Knock-Out Drum )THYNA PETROLEUM SERVICESETAP (Tunisia)2013/2014
Project:
Client:Owner:
Year:
1211
Supply and Fabrication of HP, LP, & Cryogenic Tandem Flare System ( H : 65m ) for the Nawara Development Project – GTP in GabesAEREONOMV / ETAP (Tunisia)2015
Project:
Client:Owner:
Year:
Design and Fabrication of two columns, C101:Stripper gasolineC201:Oil regeneration SOTULUB (Tunisia)2001
Project:
Owner:Year:
Supply , Prefabrication and construction of a complete unit of gas oil separator (G. O. S. P.) 15 000 B/ Day At EL-MABRUK and erection of 5 oil storage tank (5000 BBLS) GEO SERVICESTOTAL (Libya)1995
Project:
Client:Owner:
Year:
d
1413
Design , Fabrication & Construction of 07 shop fabricated Storage Tanks ( API 12F )MSBI (Streicher & Bouchamaoui)ETAP & OMV (Tunisia)2017/2018
Project:
Client:Owner:
Year:
Mechanical equipment Erection works ( 150 equipment )in CPF Nawara Gas Project MSBI (Streicher & Bouchamaoui)ETAP & OMV (Tunisia)2017/2018
Project:
Client:Owner:
Year:
Prefabrication and Site Erection works of 17 Skids & Piping ( 93 000 ID and 8000 spools in : CS , SS , Duplex & Super Duplex )MSBI (Streicher & Bouchamaoui)ETAP & OMV (Tunisia)2017/2018
Project:
Client:Owner:
Year:
1615
Design , Supply & Fabrication of 01 Pig Launcher Skid and 01 Pig Receiver Skid .SITEPETAP & ENI (Tunisia)2013
Project:
Client:Owner:
Year:
Supply of Pig Traps (10 Pig Launcher & Pig Receiver from 4'' to 28'') for the Nawara Development Project MSBI (Streicher & Bouchamaoui)ETAP & OMV (Tunisia)2016/2017
Project:
Client:Owner:
Year:
Supply, Prefabrication and delivery of tubular pipe racks steel structure for the jetty of AGIP gas project. 72 bent (L: 36m; w: 6m; h: 4.5m).Total length: 2500m; total weight: 2500 tons.BESIXENI GAS (Libya)2003
Project:
Client:Owner:
Year:
1817
Engineering , Procurement and Construction of 2 oil storage Tanks (60 000 m3) on turn-key basis including manifold and interconnecting piping at Skhira terminal. TANKMEDETAP & SNDP (Tunisia)2008/2011
Project:
Client:Owner:
Year:
Prefabrication of piping for Miscar Plateform and Hannabal gas plantBG ETAP (Tunisia)2012
Project:
Client:Owner:
Year:
Prefabrication of piping works ( 42 000 ID) including NDT , Painting , Preservation & Packing for the new inlet gas
BONATTIMELLITAH OIL &GAS (Libya)2018
Project:
Client:Owner:
Year:
2019
Engineering , Supply , Prefabrication and Delivery of 05 Storage Tanks ( 2* 3500 m3 Ohanet , 01*2100 m3 Acheb and 02*250 m3 Edeyen ) at the Ohanet region.KENZA INDUSTRY AND SERVICES SONATRACH ( Algeria)2018
Project:
Client:
Owner:Year:
Design , Supply , Prefabrication , Delivery and Construction of 03 storage tanks ( 2* 10 000m3 & 1*1000 m3 ) for ALRAR ProjectPETROFAC & BONATTISONATRACH (Algeria)2014/2015
Project:
Client:Owner:
Year:
Demolition using water-jet & cold cutting tools of existing and reconstruction of new 500,000 USBBL Crude Oil Floating Roof Storage Tank (Diam: 80m, H:17m)HAROUGE OIL OPERATIONS (Libya) 2012
Project:
Owner:Year:
2221
Batch II : - Design , Supply , Prefabrication and Delivery of Vertical Tanks ( 1* 2000m3 )With Fixed Roof Floating Suction Supplying For The Conversion Of Floating Roof Tank To Fixed Roof Tank Floating Suction (1*3 000m3 & 1*1000m3 ) - EL Khroub project -NAFTALBatch III : Design , Supply , Prefabrication and Delivery of Vertical Fixed Roof Tanks an Internal Floating Screen( 03* 10 000m3 & 1 * 1000m3 ) - EL Khroub project ENGTP NAFTAL (Algeria)2013/2014
Project:
Client:Owner:
Year:
Engineering , Procurement and Construction of 4 oil storage tank (80.000m3) including manifold and interconnecting piping TANKMEDETAP & SNDP (Tunisia)2011
Project:
Client:Owner:
Year:
1) Design, Supply of materials, cleaning, inspection and mainte-
tanks at asphalt plant Benghazi.2) Supply materials and Maintenance of 09 Floating Roof
(1) 2008/2009 - (2) 2012/2014
Projects:
Owner:Year:
Provision of construction services for Pre-commissioning/Assistance to commissioning for the Nawara Development Project - GTP in Gabes.ABB OMV/ETAP (Tunisia)2018
Project:
Client:Owner:
Year:
2423
Revamping of the marine jetty and 28th march terminal station in TOBRUK.
maintenance works :-Overhauling of loading arms, diesel engines, pumps, valves…-Replacement of tanks, cooling system.
Electrical and instrument works: lighting, control rooms, trans-formers, electric motors, generators.
Sandblasting and painting works (50 000 m²).BREGA PETROLEUM MARKETING CO. (Libya) 1995/1996
Project:
Owner:Year:
Revamping of the ASHTART offshore platform Piping Prefabrica-tion and installation on site (ASHTART offshore platform )ROSETTI MARINO SEREPT ( Tunisia)2011
Project:
Client:Owner:
Year:
Supply , Fabrication and E&I installation of an offshore subsea and topside structure elements of a conductor supported platform (CSP) - Dimensions: H 18 m, L 14 m, W 12 m / Weight: 200T with Equipments- SAPETROAQUATERRA SAPETRO (Benin)2013/2014
Project:
Client:Owner:
Year:
Other References
27 28
Other References:
29 30
Other References
29 30