Date post: | 17-Jan-2016 |
Category: |
Documents |
Upload: | amie-wells |
View: | 218 times |
Download: | 0 times |
Page 1 of 33
GPSMAP 76C Waypoint Entry and Route Creation
Page 2 of 33Our cruise is from Sturgeon Bay’s Center Channel to the Entrance of Menominee’s Marina.
Sturgeon Bay to Menominee
Page 3 of 33This clearly needs some corrections at the Menekaunee Shoal nun #6 and other spots
Menekaunee Shoal
Page 4 of 33
Insert a Waypoint into the Route
– Select the route and then from pull down select Insert Section.
• Inserted a waypoint and move it so you can go around the number 6 nun at Menekaunee.
Page 5 of 33
Insert a 2nd additional Waypoint
• Select Insert Section on Pull Down Menu
• Grab Route in and move the new waypoint so as to clear the harbor entrance.
Page 6 of 33
Zoom in on the Harbor
• Shows a Wreck in the path.
• More Waypoint insertion?
• Or just move a waypoint?
Page 7 of 33
How to do it on the 76C?
The Starting Point
• Preferred start is without any waypoints or routes in the GPS (not mandatory)
• Put GPS in GPS Off mode
• Then create waypoint 001 using Mark Waypoint
• Etc. till all points for the route of interest are created
• Then relocate on the Map page
Page 8 of 33
hold
PagePage
Power On and get into GPS Off Mode
Press and hold Power until intro page appears, then press Page and Satellite Status screen appears. Press Menu, select Use With GPS Off and press Enter
MenuMenu EnterEnter
Page 9 of 33
Turn on backlight
Press Power (briefly), then rocker up to turn backlight on. Press Enter to confirm
EnterEnter
Page 10 of 33
Set backlight to “stay on”
2xMenuMenu EnterEnter EnterEnter
Press Menu twice, scroll to Setup then press Enter. Scroll to Display and press Enter. Scroll down to Backlight Timeout
Page 11 of 33
Set backlight to “stay on”
EnterEnter PagePage
Press Enter and scroll up to Stays On. Press Enter then press Page to return to main page, Satellite Status
EnterEnter
Page 12 of 33
Delete the old routes
QuitQuit Menu MenuEnterEnter
Page 13 of 33
GET TO ROUTES MENU
Press QUIT and scroll OVER to ROUTES. Press Enter then MENU
QuitQuit
Find FindEnterEnterEnterEnter
Page 14 of 33
Delete all the Waypoints
EnterEnter MenuMenu EnterEnter
Page 15 of 33
Deleting All Waypoints Continued
QuitQuitEnterEnterEnterEnter To the GPS Page
Page 16 of 33
Set up new Location
Scroll down to select MAP press Enter. Zoom IN a bit. Scroll to Routes starting point.
EnterEnter InInMenuMenu
ScrollScroll
& & more Zoom
InIn
Page 17 of 33
Mark Waypoint
EnterEnter
EnterEnter
hold
Press ENTER when in final position,
ScrollScroll
Page 18 of 33
Change Symbol
EnterEnter EnterEnter
Page 19 of 33
Change the name of Waypoint?
ScrollScrollEnterEnterEnterEnter
Page 20 of 33
Enter 1st Waypoint
MenuMenuEnterEnter EnterEnter
Page 21 of 33
Move to 2nd New Location
OutOutEnterEnter ScrollScroll
Page 22 of 33
Mark 2nd Waypoint
hold
EnterEnter
EnterEnter EnterEnterMenuMenuMenuMenu
Page 23 of 33
Selection of 3rd New Location
EnterEnter EnterEnter ScrollScroll
Page 24 of 33
Zoom in on 3rd Location
InIn ScrollScroll InIn EnterEnter
Page 25 of 33
Enter 3rd Waypoint
hold
EnterEnterEnterEnter MenuMenu EnterEnter
Page 26 of 33
Look for 4th New Location
EnterEnter ScrollScroll ScrollScroll
Page 27 of 33
Zoom in on 4th Location
ININ ININ EnterEnter hold
EnterEnter
Page 28 of 33
The Route Waypoints are Entered
EnterEnter MenuMenu MenuMenu
Select Routes Menu
4th Waypoint Entered
Page 29 of 33
Route using Waypoint List
Page 30 of 33
Route from Waypoint List - cont.
Route is named 001 - 001
Page 31 of 33
Point 2 and 3
Page 32 of 33
Page 33 of 33
Page 34 of 33
Page 35 of 33
Route is now named 001 - 004
Page 36 of 33