Page 1 pre-engineering lab

Pre-Engineering Laboratory

By;

Cover L

etter

2 of 111

December 6, 2004 REF: Pre-Engineering Laboratory Budgetary Proposal We are pleased to present you with our complete comprehensive solution proposal. Here are some of the IST-PE Turnkey Program Contents covered by our program;

The IST Pre-Engineering program is a turnkey solution with a comprehensive set of products and services to enable teachers to effectively implement a successful pre-engineering program. In quoted form the lab is set up for a total of 36 students at once. The program includes the following:

• Technology Learning Units - These units include hands-on student learning stations with industrial quality software and equipment to provide understanding of technical and engineering topics.

• Printed Curriculum - Each integrated learning unit includes a printed curriculum in an individualized, layered, skills-based format.

• Interactive Multimedia Curriculum - Various integrated learning units are available with an optional interactive multimedia version of the printed curriculum to enhance student learning and motivation.

• Team-Based Student Projects - Teachers can choose from a variety of team-based thematic projects. Each project includes: project materials, design briefs, and teacher solutions.

• Enterprise Skills Curriculum - The Enterprise Skills Curriculum includes a curriculum to provide structured learning of project-related skills such as teamwork, problem solving, workplace skills, and interpersonal skills.

• Electronic Portfolio Assessment System - The Amatrol SkillPro software automatically collects student assessment results and organizes them in useful reporting formats.

• Teacher Training Services - Technologies International & Kitmeer provides tuition-free teacher training for initial and on-going professional development of teachers involved in the IST Pre-Engineering program. Travel and per diem included on first training program, additional tuition is free but travel and lodging are at the expense of the end user.

• Service and Support Services – At Technologies International & Kitmeer service and support are second to none with international support and local service technicians.

Technologies International, LLC 1308 Clifton Street NW · Suite 405

Washington · DC· 20009 · USA

Kitmeer

P.O.Box 500211 Dubai Internet City

United Arab Emirates

3 of 111

Virtual Learning Suites – We have created computer based learning multimedia software that can enrich and extend technical curriculum. 158 different learning topics are presented in three suites: Electrical, Mechanical and Manufacturing. If you would like a specific proposal put together for the software suites we would be willing to prepare one for you. You can contact us through our Regional Office:

Kitmeer P.O.Box 500211

Dubai Internet City United Arab Emirates

We look forward to working with you. Respectfully, Kitmeer Team

4 of 111

Specification

s

5 of 111


Item# QTY Item Description/Info

36-Student Level 1 ITC / Pre-Engineering Lab

1.0 1 ITC Instructors Package, Level 1Includes: (1) Teacher's Guide; (1) CDROM-print license for Teacher's Guide; (1) Skillpro Database template levels 1 and 2.

2.0 1 Enterprise Systems Unit 1Includes: (1) Hot Wire Prototyping Machine with Supplies; (1) Student Learning Activity Packet Set; (1) Teacher's Guide; (1) CDROM-print license for Student Activity Packets; (1) CDROM-print license for Teacher's Guide.

3.0 1 Classroom Management Software (Base Copy)Requires computer. Includes: (1) Classroom Management Software with: (1) Database Module; (1) Outcomes Template Module; (1) Quiz Module; (1) Network Module; (1) Reporter Module; (1) Identification Module; (1) Grade Module; (1) User’s Guide; (1) Installation Guide.

4.0 3 Master Project Kit Package 1.1Includes: (1) ITC Project Library; (1) CDROM Print license for ITC Project Library; (1) Solar Panel Kit; (1) Hovercraft Kit; (1) Automated Hydroponic Kit; (1) Automated Can Crusher Kit; (1) Ergonomic Workstation Kit; (1) Smart House Kit.

5.0 1 ITC Teacher Training 1-weekIncludes: Tuition, materials, lunch, for (3) instructors for ITC levels 1 and 2 - 4-1/2 day course. Included with project, EXCEPT airfare and per diem which are at the cost to the client

6.0 1 Electrical Control 1 UnitOne 2-student station supplied. Requires computer and compressed air supply. To include: (1) Electrical Control Unit; (1) Electrical Unit Expansion; (2) Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM.

7.0 1 AC/DC Electrical 1 UnitOne 2-student station supplied. Requires computer. To include: (1) AC/DC Electrical Trainer; (2) Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM.

8.0 1 Machine Tools 1 UnitOne 2-student station supplied. Requires Machine Tool Package or equivalent capacity machine and hand tools, computer, and raw materials (94-RM6). To include: (2) Student Learning Activity Packet Set; (1) Teacher’s Guide-Printed; (1) Student Curriculum -Interactive CDROM.

9.0 1 Manual Machine Tool StationTo include: (1) 82-612 Workstation with Maple Block top; (1) Table Mounted Drill Press; (1) Table Mounted Vise; (1) Floor Standing Horizontal/Vertical Band Saw, metal and wood; (1) Table Mounted Sander, metal and wood; (1) Tooling.

10.0 1 Drill Press Raw Metal Material Kit for 94-MP-1 Unit, 24 StudentsIncludes: (13) Aluminum, 1" x 2" x 35"; (6) Aluminum, 1" x 2" x 31".

11.0 1 CNC Machines 1 UnitOne 2-student station supplied. Requires computer and raw materials (94-RM2 and 94-RM3). To include: (1)CNC-M60 Denford Micromill IST CNC Milling Machine (1) Tooling Package and vise for CNC Milling Machine; (2) Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM;

Technologies International · Washington DC · USAKitmeer · Dubai Internet City · UAE



12.0 1 CNC Mill Plastic, Raw Matl for 94-MP-1 Includes: (12) Plastic, 1/4" x 2-1/2" x 3-1/2"; (150) Plastic two color 1/16" x 2-1/2" x 1-1/2".

13.0 1 CNC Mill Raw Metal Material Kit for 94-MP-1 Unit, 24 StudentsUsed by CNC mill to perform activities in 94-MP-1 Module. Includes: (1) Aluminum, 1" x 1" x 48"; (2) Aluminum, 3/4" x 3" x 48".

14.0 1 Pegasus Robotics Simulation Learning System, 10 Station10-station license. Windows Based. Runs stand-alone and interfaces to any Pegasus robot. Includes: robot workcell generator, program development module, simulation module, virtual teach pendant, coordinate display module; (1) Student Learning Activity Packet; (1) Instructor's Guide; (1) Installation Guide.

15.0 1 Robotics 1 UnitOne 2-student station supplied. Requires computer and compressed air supply (5 CFM @ 100 PSIG/0.142cmm @690kPA). To include: (1) 880-RA2-1 Pegasus Servo Robot ; (1) 88-200-1 Mobile Workstation ; (1) 88-P1 Parts Set ; (1) 88-F1 Feeder; (3) 88-A6 Parts Bin; (1) 88-A7 Manual Push button; (1) 88-A8 Indicator Light; (2) Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM.

16.0 1 Pneumatics 1 & Pneumatics 1 Simulation UnitsTwo student stations supplied. Requires computer per station and compressed air supply. To include: (1) Basic Pneumatics Trainer; (1) Pneumatic Simulation Software; (2) Student Learning Activity Packet Set; (1) Teacher’s Guides - Printed; (1) Student Curriculum -Interactive CDROM.

17.0 1 Measurement Tools 1 UnitOne 2-student station supplied. Requires computer. To include: (1) Measurement Tools Level 1; (1) Measurement Tools Level 2; (1) Digital Caliper; (1) Parts Package; (1) SPC Data Management Software; (1) Computer Interface; (1) Table-top Workstation; (2) Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM.

18.0 1 Measurement Tools 1 UnitAdds to 96-MES1 to support one additional measurement student station. One 2-student station supplied. Requires computer. To include: (1) Measurement Tools Level 1; (1) Measurement Tools Level 2; (1) Digital Caliper;(1) Table-top Workstation; (2) Student Curriculum -Printed; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM.

19.0 1 Computer Aided Drafting 1 UnitFive student stations supplied. Requires one computer per station. To include: (5) AutoCAD LT Software; (2) Student Curriculum -Printed; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM.

20.0 1 Desktop Publishing 1 UnitTwo student stations supplied. Requires one computer per station. To include: (2) Microsoft Publisher Desktop; (2) B745 Student Curriculum –Printed; (1) B755 Teacher’s Guide- Printed; (1) CD-B755 Student Curriculum - Interactive CDROM.

21.0 1 Graphic Design 1 UnitTwo student stations supplied. Requires one computer per station. To include: (2) Freehand Graphic Design Software; (1) Digital Camera; (1) Scanner; (1) Photoshop Elements Software; (2) Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum - Interactive CDROM.




22.0 1 Mechanical Systems 1 UnitOne 2-student station supplied. To include: (1) Mechanisms Trainer, level 1; (1) Mechanisms Trainer, level 2; (2) Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum - Interactive CDROM.

36-Student Furniture and ComputerRequirements for Level 1 ITC Program

23 Student Computers (Assumes 2 Students Per)

6 Common Hand Tool Set

1 Teacher's Computer

1 Teacher's Chair

1 Local Are Network Equipment (installation separate)

36 Student Chairs

7 Mobile Technology Workstation, Type 3 - 6 FootIncludes: (1) Welded Steel Frame; (1) Solid Hard Maple Work Surface; (1) Dimensions: 30"H x 30"W x 72"L; (4) Casters.

16 Mobile Technology Workstation, Type 1 - 6 FootIncludes: (1) Welded Steel Frame; (1) White Laminated Work Surface; (1) Dimensions: 30H x 30W x 72L inches ; (4) Casters.

1 Air CompressorIncludes compressor, tank, 5 hp, 1 ph, 115 VAC, 60 Hz direct drive motor, dual gauge regulator, 20 gal. tank, 4.5 CFM@125 psi, thermal overload, power cord, safety valve, air hose. Requires customer-supplied compressed air conditioning.

1 36 Student Lab Software PackageExpands ITC 1 Lab to 36 Students. Includes: (1) Additional License of all Multimedia Curriculum; (1) Desktop Publishing Software; (1) Graphic Design Software; (1) AC/DC Electrical Software; (1) Pneumatic Simulation Software; (2) Robotic Simulation Software; (2) Desktop Publishing Laps; (2) Graphic Design Laps; (2) AC/DC Electrical Laps; (2)Pneumatic Simulation Laps; (2)Robotic Simulation Laps.

1 Print License - Set of 13 units - See Below1 50-Copy CD Print License - Electrical Control 1 Unit (96-ECS1)1 50-Copy CD Print License - AC/DC Electrical 1 Unit (96-ADE1)1 50-Copy CD Print License - Machince Tools 1 Unit (96-MP1)1 50-Copy CD Print License - CNC Machines 1 Unit (96-CNC1)1 50-Copy CD Print License - Robotics 1 Unit (96-ROB1)1 50-Copy CD Print License, Pneumatics 1 (96-PNE1)1 50-Copy CD Print License, Pneumatics 1 Simulation (96-PNE1)1 50-Copy CD Print License - Measurement Tools 1 Unit (96-MES1)1 50-Copy CD Print License - Computer Aided Drafting 1 Unit (96-CAD1)1 50-Copy CD Print License - Desktop Publishing 1 Unite (96-DTP1)1 50-Copy CD Print License - Graphic Design 1 Unit (96-GDA1)1 50-Copy CD Print License - Mechanical Systems 1 Unit (96-MEC1)1 50-Copy Print License, Pegasus Simulation




36-Student Level 2 Pre-Engineering Lab

1 ITC Instructor's Package, Level 2Includes: (1) Teacher's Guide;(1) CDROM-print license for Teacher's Guide; (1) Skillpro Database template levels 3 and 4.

1 Enterprise Systems Unit 2Includes: (1) Student Learning Activity Packet Set; (1) Teacher's Guide; (1) CDROM-print license for Student Activity Packets; (1) CDROM-print license for Teacher's Guide.

3 Master Project Kit Package 2.1Includes: (1) Project Library; (1) CDROM Print license for Project Library;(1) Steam Powered Catapult Kit; (1) Water Desalination Kit; (1) Maglev Train Project; (1) Automatic Drawbridge Project; (1) Ergonomic Manipulator Project; (1) FMS Workcell Kit

1 ITC Teacher Training 1-weekIncludes: Tuition, materials, lunch, for (3) instructors for ITC levels 1 and 2 - 4-1/2 day course. Included with project, EXCEPT airfare and per diem which are at the cost to the client

1 Internet Marketing 1 UnitTwo student stations supplied. Requires one computer per station. To include: (2) Front Page Website Design Software; (2) Student Learning Activity Packet Set; (2) Teacher’s Guide- Printed; (1) Student Curriculum - Interactive CDROM.

1 Computer Control 1 UnitRequires 96-ECS1 and computer. To include: (1) Micrologix Programmable Logic Controller; (1) RS Logix Programming Software (1)Mounting Console; (1)Lead set; (1) Student Learning Activity Packet Set; (1) Teacher's Guide - Printed; (1) CD-Student Curriculum - Interactive CDROM.

1 Thermal Technology 1 UnitIncludes: (1) Thermal Technology Workstation and Components; (1) Student Learning Activity Packet Set; (1) Teacher's Guide - Printed; (1) Student Curriculum - Interactive CDROM.

1 Pneumatics 2 UnitRequires 96-PNE1 unit and Hand Tool Package. Includes: (1) 85-IP Intermediate Pneumatics System; (1) 11495 Vacuum Components Kit; (1) 3/2 Pneumatic Valve; (1) 11197 Supplemental Disk; (1) Student Curriculum printed; (1) Teachers Guide - Printed; (1) Student Curriculum - Interactive CDROM.

1 Video Production 1 UnitOne 2-student station supplied. Requires computer. To include: (1) Camcorder; (1) Tripod; (1) 1/2 inch VHS Video Deck; (1) Video Software and Interface; (1) Lighting Kit; (1) Video Monitor- 13 inch; (1) Microphone- hand held with stand; (1) Microphone- lavaliere type; (2)Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum - Interactive CDROM.

1 Computer-Aided Manufacturing 1 UnitOne 2-student station supplied. Requires 96-CNC1, computer and raw materials (94-RM14). To include: (1) MasterCam Cam Software, Version 6.13; (1) CAM/CAD Supplemental Disk; (1) Tensile Specimen Fixture w/ Adapter Plate; (2) B723 Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM.




1 Robotics 2 UnitRequires 96-ROB1 Unit. Includes: (1) 88-A1 Operator Station; (1) 88-A2 Inspection Station; (1) 88-A3 Assembly Station; (1) 88-A4 Palletizing Module; (1) 88-A9 Sensor for 88-F1 Feeder; (1) 88-LC1 Linear Servo Conveyor; (1) 23065 External Servo Axis Cable Set; (2) Student Learning Activity Packet Set; (1)Teacher's Guide-printed; (1) CD-Student curriculum - Interactive CDROM.

1 Structural Engineering UnitRequires (1) computer w/standard height PCI slot. Includes: (1) Structural Testing System; (1) Workstation, table-top; (1) Bridge Component set 1; (1) Bridge Component Set 2A; (1) Test fixture Set 1; (1) Indicator Package; (1) Bridge Video; (1) Bridge Designer Software; (2) Student Curriculum with Learning Activity Packets; (1) Assessment Portfolio Kit; (1) Student Curriculum - Interactive CDROM.

1 Structural Engineering UnitRequires 96-SE1 Unit and computer w/standard height PCI slot. Includes: (1) Data Acquisition System; (1) Bridge Component Set 2B; (1) Beam Component Set 1; (1) Test Fixture Set 2; (1) Student Learning Activity Packets; (1)Assessment Portfolio Kit.

1 AC/DC Electrical 2 UnitRequires 96-ADE1. One 2-student station supplied. To include: (1) Component add-on package for T7017; (2) Student Learning Activity Packet Set; (1) Teacher's Guide - Printed; (1) Student Curriculum - Interactive CDROM.

1 Computer Aided Drafting 2 UnitRequires 96-CAD1. Includes: (2) Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM.

1 CNC Machines 2 UnitRequires 96-CNC1. To include: (2) Student Learning Activity Packet Set; (1) Teacher’s Guide- Printed; (1) Student Curriculum -Interactive CDROM.


1 Print License - Set of 11 units - See Below1 50-Copy CD Print License - Internet Marketing 1 Unit (96-INT1)1 50-Copy CD Print License - Computer Control 1 Unit (96-CT1)1 50-Copy CD Print License, Thermal Technology Unit 1 (96-TT1)1 50-Copy CD Print License, Pneumatics 1 (96-PNE2)1 50-Copy CD Print License - Video Production 1 Unit (96-AVA1)1 50-Copy CD Print License - Computer Aided Manufacturing 1 Unit (96-CAM1)

1 50-Copy CD Print License - Robotics 2 Unit (96-ROB2)1 50-Copy CD Print License, Structural Engineering 1 Unit (96-SE1)1 50-Copy CD Print License - AC/DC Electrical 2 Unit (96-ADE2)1 50-Copy CD Print License - Computer Aided Drafting 2 Unit (96-CAD2)1 50-Copy CD Print License - CNC Machines 2 Unit (96-CNC2)

36-Student Level 3 ITC / Pre-Engineering Lab




1 Enterprise Systems Unit 3Includes: (1) Student Learning Activity Packet Set; (1) Teacher's Guide; (1) CDROM-print license for Student Activity Packets; (1) CDROM-print license for Teacher's Guide.

1 Materials Technology 1 UnitRequires: (1) Computer w/standard height PCI slot; To include: (1) Materials Engineering Console w/T9014; (1) Data Acquisition System; (1) Material Test Set 1; (1) Starter Specimen Set 1; (1) Student Learning Activity Packet Set; (1) Instructor's Guide - printed; (1) Student Curriculum- Interactive CD ROM.

1 CNC Machines 3 UnitRequires 96-CNC1 Unit. Two student station supplied. Requires one computer per station. Includes: (1) 94-CNC-L60 Denford Microturn CNC Lathe; (1) 15706 Tooling Package for CNC Lathe; (1)Student Learning Activity Packet Set; (1) Teacher's Guide - Printed System; (1) Student Curriculum - Interactive CDROM.

1 Design of Structures 2 UnitAdds to 94-DOS-1. Includes: (1) Concrete Beam Component Set 1; (1) Building Component Set 1; (1) Beam Component Set 2; (1) Structures Video; (2) Student Curriculum Learning Activity Packet; (1) Assessment Portfolio Kit.

1 Design of Structures 3 UnitIncludes: (1) T9003 Surveying Equipment; (2) 11602 Student Curriculum Learning Activity Packet; (1) 11612 Assessment Portfolio Kit.

1 Measurement Tools 2 Unit Requires 96-MES1 Unit and Computer. Includes: (1) 91-500 SPC Software; (1) Student Curriculum - Printed; (1) Teacher's Guide - Printed; (1)Student Curriculum - Interactive CDROM.

1 Measurement Tools 3 UnitTeaches Geometric Dimensioning and Tolerancing. Requires 96-MES1 Unit. Includes: (1) Student Curriculum - Printed; (1) Teacher's Guide - Printed; (1) Student Curriculum - Interactive CDROM.

1 Plastics Technology UnitRequires compressed air source and a workstation . Includes: (1) Industrial Plastics Center with: (1) Temperature Control System; (1) 4 oz Shot Material Feed System with Electro-pneumatic Control; (1) Heater System; (1) Safety Enclosure; (1) Set of Starter Molds; (1) Plastics Accessories; (1) Injection Molding Module with: (1) 8 Ton Clamping System; (1) Mold Offset Plates; (1) Set of Starter Molds; (1) Blow Molding Module with: (1) Clamping System; (1) Extrusion Die; (1) Pneumatic Blow System; (1) Starter Mold; (1) Extrusion Module with: (1) Set of Dies; (2) Student Curriculum with Learning Activity Packets; (1) Assessment Portfolio Kit.

1 Computer Control 2 UnitRequires 96-CT1 Unit. Includes: (2) Student Learning Activity Packet Set; (1) Teachers Guide; (1) Student Curriculum Interactive CDROM.

1 Thermal Technology 2 UnitIncludes: (1) Thermal System; (2) Student Learning Activity Packet Set; (1) Portfolio Assessment; (1) Multimedia Curriculum

1 Fluid Systems 2 UnitRequires 208-240/120 VAC, single phase electrical power , computer w/standard height PCI slot, and Hand Tool Package. Includes: (1) Mobile Workstation; (1) Centrifugal Pump System Unit; (1) Centrifigal Pump System Unit; (1) Variable Speed Motor/Drive Unite; (1) Tank with Valve Network; (1) Torque Load/Speed Monitor; (1) Precision Pressure Gage Set; (1) Digital Flow Meter; (1) Fluid Circuits Analysis Unit; (1) Data Acquisition System; (2) Student Curriculum with Learning Activity Packets; (1) Assessment/Portfolio Kit; (1) Installation Manual.




1 Thermal Systems 2 UnitAdds to 94-TS-1, T7082 or T7082-A. Includes: HARDWARE: (1) Environmental Applications System, table-top mount, with Air Duct Distribution System; (1) Instrumentation Set; (1) Comfort Controls; (1) Environmental Input Set; (1) Insulation System; (1) Main Power and Control; COURSEWARE: (2)Student Curriculum with Learning Activity Packets; (1) Assessment/Portfolio Kit; (1) Instrallation Manual.

1 Flexible Manufacturing Systems 1 UnitAdds to 94-AMH-1 and 94-RCP-1 Systems. CNC machine with integration is optional. Includes: (1) Digital Gauging Module; (1) 88-LT2 Traverse Axis; (1) Robot Communications Module; (1) Barcode Reader Module; FMS I/O Interface Module; (1) Capacitive Sensor; (1) Photoelectric Sensor; (1) Cylinder Parts Gauging Set; (1) Gearbox Assembly Parts Set; (1) Robotic Pen Holder Module; (2) Student Curriculum with Learning Activity Packets; (1) Assessment/Portfolio Kit; (1) Installation Manual

1 Mechanical Systems 1 UnitRequires 41210 Hand Tool Package. Includes: (1) Mechanical Drives Trainer; (2) Student Curriculum with Learning Activity Packets; (1) Assessment/Portfolio Kit; (1) Installation Manual.

1 Hand Tool Package 1 - MechanicalAdds to 950-ME1, 950-ME1-SB, and 94-ME-1. Includes: (1) Socket Set; (1) Torque Wrench; (2) Combination Wrench; (1) Screwdriver Set; (1) 6" Rule; (1) Allen Wrench Set; (10) Corrosion Inhibiting Wrap; (1) 6" Dial Calipers; (1) Feeler Gauge; (1) Dead Blow Hammer; (1) Leather Gloves; (1) Wax Crayon and Holder; (1) Magnifier; (1) Nylon String; (1) Oil; (1) Keyway Punch; (1) Rubber Gloves; (1) Spring Scale; (1) Tape Measure; (1) Threadlocker; (1) 3-Drawer Tool Box; (1) Utility Knife; (2) Wire Brush Sets; (1) Masking Tape; (1) Scissors.

1 Mobile Technology Workstation, Type 3 - 6 FootIncludes: (1) Welded Steel Frame; (1) Solid Hard Maple Work Surface; (1) Dimensions: 30"H x 30"W x 72"L; (4) Casters.


2 Mobile Technology Workstation, Type 2 - 8 FootIncludes: (1) Welded Steel Frame; (1) White Laminated Work Surface; (1) Dimensions: 30"H x 30"W x 96"L; (4) Casters.

1 Multimedia - Set of 5 units - See Below

1 Interactive CDROM-Manufacturing Processes 3 Set of 5 CDROMs - To Include the Following Topics: 1-Introduction to Injection Molding Operations, 2-Injection Molding Operations, 3-Plastics: Chemistry and Properties, 4-Introduction to Blow Molding Operations, 5-Introduction to Extrusion Operations.

Required Windows 98 of higher, 94-CMS-1A software recommended. 1-station license. Referenced Equipment: 94-MP-3 Manufacturing Processes 3 Unit.

1 Interactive CDROM - Design of Structures 2Set of 3 CDROMs - To include the following CDROM titles: 1-Beam Deflection and Column Buckling; 2-Introduction to Concrete; 3-Building Design and Construction.

Requires Windows 98 or higher, 94-CMS-1A software recommended: 1-station license. Referenced equipment: 94DOS-2

1 Interactive CDROM - Design of Structures 3




Set of 4 CDROMS - To include the following CDROM titles: 1-Surveying Fundamentals; 2-Surveying Applications; 3-Mapping; 4-Global Positioning Systems. Requires Windows 98 or higher, 94-CMS-1A software recommended: 1-station license.

1 Interactive CDROM - Thermal Systems 2Set of 4 CDROMs - To include the following CDROM titles: 1-Thermal System Performance, 2-Insulation, 3-Psychrometrics, 4-Residential Heating and Cooling.

Requires Windows 98 or higher, 94-CMS-1A software recommended. 1-station license. Referenced equipment: 94-TS-1 Thermal Systems 1.

1 Interactive CDROM-Fluid Systems 2Set of 5 CDROMs - To include the following CDROM titles: 1-Centrifugal Pump Operation; 2-Centrifugal Pump Characteristics; 3-Data Acquisition Systems; 4-Pump Power; 5-Pump System Design. Requires Windows 98 or higher, 94-CMS-1A software recommended. 1 - station license.

1 Print License - Set of 12 units - See Below1 50-Copy CD Print License, Flexible Manufacturing Systems 11 50-Copy CD Print License, Plastics Technology1 50-Copy CD Print License, Design of Structures 21 50-Copy CD Print License, Design of Structures 31 50-Copy CD Print License, Thermal Systems 21 50-Copy CD Print License, Fluid Systems 21 50-Copy CD Print License - CNC Machines 3 Unit (96-CNC3)1 50-Copy CD Print License - Measurement Tools 2 Unit (96-MES2)1 50-Copy CD Print License - Measurement Tools 3 Unit (96-MES3)1 50-Copy CD Print License, Computer Control 2 (96-CT2)1 50-Copy CD Print License, Material Technology 1 Unit (96-MT1)1 50-Copy CD Print License, Thermal Technology Unit 2 (96-TT2)


Literatu

re

14 of 111

15 of 111

16 of 111

17 of 111

18 of 111

19 of 111

20 of 111

21 of 111

22 of 111

23 of 111

Cu

rriculu

m O

verview

24 of 111

Kitmeer · P.O.Box 500211 · Dubai Internet City · United Arab Emirates Technologies International · 1308 Clifton Street NW · Suite 405 · Washington, DC 20009 · USA

Integrated Systems Technology (IST) Pre-Engineering Program

A skills-based high school technology program that articulates to college, university, and industry

Engineering and technology offer some of the most rewarding career opportunities possible! The Integrated Systems Technology (IST) Pre-Engineering program from TI and Kitmeer is a great way to get high school students interested in these exciting careers. Hands-on experience in a wide range of engineering technologies using industrial quality equipment and software prepares them for success in college and beyond. The IST Pre-Engineering program uses a unique blend of project-based team learning combined with a rotational individualized learning format for technical skills development.

The IST Pre-Engineering program is also unique because it offers students:

Complete Range of Career Exploration The IST Pre-Engineering program allows students to explore a larger number of engineering and technical careers. It offers a more extensive range of technical topics than any other program today.

Extensive Articulation to College The IST Pre-Engineering curriculum enables students to articulate to post-secondary programs more extensively because it has greater depth and breadth than other programs. Alignment with content is keyed to specific post-secondary standards, enabling students to get up to 18 hours of credit at colleges and universities. The content is keyed to specific technical courses enable students to receive required course credit, not just elective credit.

Customized to Student Abilities and Interests The IST Pre-Engineering program enables students with a wide range of interests and abilities to be successful. The curriculum uses an individualized format, and each curriculum topic has been layered so the depth gradually increases. Students learn each technical subject using a computer-based interactive multimedia curriculum, allowing them to learn about different things at the same time. Each student can learn at their own pace, focus on subjects that specifically interest them and work with materials that are appropriate for their abilities.

Integrated Academic Applications The curriculum has been infused with math and science to show students why they need to understand these critical areas. Extensive application throughout the curriculum allows students to improve their skills in these areas.

Industry Relevant Technical Skills The curriculum uses a unique skills-based design that focuses on teaching industry relevant technical skills. Students can gain college credit while learning to apply their skills in industry.

25 of 111

Kitmeer · P.O.Box 500211 · Dubai Internet City · United Arab Emirates Technologies International · 1308 Clifton Street NW · Suite 405 · Washington, DC 20009 · USA

Team-Based Project Skills Students learn how to work on teams and solve real world problems through team-based projects and the supporting project-related curriculum. Each project uses a thematic approach, which includes a cross-disciplinary blend of academics and multiple technical subjects that is built around a real project relating to one of the 7 major industry sectors. The supporting curriculum formally teaches students how to work on teams, problem solve, make presentations, and manage a project

Our Pre-Engineering Program covers the following learning subject areas;

• CAD/ CAM

• CNC Machines

• Computers

• Electrical

• Fluids

• Manufacturing Processes

• Materials

• Mechanical

• Process Control

• Robotics

• Structural Design

• Surveying

• Thermal

For a more I depth look at the curriculum, please see the next section, Curriculum Coverage.

26 of 111

Date post:	11-Feb-2022
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Page 1 pre-engineering lab

Documents