Presentation
STRUCTURAL REINFORCEMENT- Carbon fiber.- Resins.- Repair mortars.- Injection resins.
STUFFED AND ANCHORS- Resins- Expandable Mortar Grout.- Polyester resins, epoxy acrylates, etc..
JOINTS- Polyurethane caulk.- Fund board.- Primers.- Silicones.- Polyurethane Foams
BUILDING PRODUCTS MORTARS- Bonding slurry.- Resins permanent tack.- Mesh mortar.- Latex.- Plasticizer-air entraining.- Water-repellent.
ALL KINDS OF MORTAR- Mortars Theming.- Refractory Mortars.- Mortars monolayer.- Mortar grouting.- Mortars Cola
- Mortars Grouts, Expandable, Anchorage, Fillers.- Mortars Microhormigones.- Repair Mortars.- Self-leveling mortars.- Mortars Waterproofing.
Concrete and MORTAR- Curators.- Waterproofing.- Release agents.- Versatile.- Superplasticizer.- Accelerators.- Retardants.- Silica fume.- Corrosion inhibitors.- Self-leveling.- Plasticizers.- air-entraining- Lightweight aggregates.- Polystyrene beads.
VARIOUS- Geotextiles.- Products antigrafittis.- Degreasers.
Here are the different families of products we sell with the most competitive prices, commercial and technical advice on site and logistics based on experience.
THERMAL, ACOUSTIC INSULATION AND REFLECTIVE- Plate heat-reflective.- Rock wool.- Glass wool.- Extruded and Expanded Polystyrene.- Prints Anti-impact.
PASSIVE FIRE PROTECTION- Mortars Fireproof, intumescent coatings, fire protection plates.- Sealing systems for installations, putty pads, grills, collars.- System protection and manufacturing exhaust ventilation ducts.- Pipeline systems for conducting wires.- Systems divisions (partitions, ceilings continuous, meeting bands, protecting floors, etc ...).- Fire doors, firewall logs, firewall fixed, etc.
PAVEMENT- Polyurethane Flooring Systems.- Systems epoxies pavings.- Stamped concrete, concrete spray 3mm layer printed walking.- Concrete products fratasados: pigments, silicas, Coridon,fibers, curators, etc..- Self-leveling Mortars: pedestrian and industrial.- Diamond cutting discs. Cortes murals. Saca witnesses.- Slurys acrylics, epoxies and asphalt.- Rubber Flooring, slurrys.- Flooring aggregates seen, deactivating.- Aggregate Binders.- Asphalt pavements, asphalt slurrys.- Resins flooring protection.- Wearing courses, aggregates, silica, corundum, marble
WATERPROOFING- Asphalt sheets.- Print PVC.- Plate EPDM.- Waterproofing Paints, acrylic paints, rubber, antigoteras. polyurethanes- Waterproofing system polyurethane paint.- Bithutene. Adhesive films.- Fishnet painting.- Bituminous emulsions- Primers repellent for facades and floors.- Primers oleo-repellent soils and facades.
FOUNDATION- Prints PVC.- System autoanclables sheets to concrete Prepufe System- Vapor barriers.- Paint asphalt, rubber asphalt paints.- Prints draining.
- Asphalt sheets.- Geogrids.- Geotextiles.- PVC Tapes concreting.- Profiles hidroexpansivos.- Separators.
POOLS AND DEPOSITS- Mortars tail.- Mortars flexible tail.- Ceramic grouts.- Waterproofing mortars.- Mastic joint sealing.- Profiles hidroexpansivos.- PVC Tapes concreting.- Repair mortars for coving.- Sealing of sprats: Rivestop, resins.- Resins and sealants to repair cracks and ceramic stuck underwater.- Water-repellent glass for concrete.- Anchoring and bonding resins.
CONCRETE, TUNNELS AND EMBANKMENTS- Bridging.- Polypropylene fibers and steel, structural fibers.- Additives superplasticizer.- Plastifiers.- Air-entraining agents.- Self-Leveling Additives- Waterproofing Additives- Polyfunctional additives- Accelerators for shotcrete. Stabilizers.- Nanosílices and silica fume.- Pigments.- Resins anchors.- Geogrids and geotextiles.- Release agents.- Separators.- Paintings carbonation.
BRIDGES- Support points: Wetsuits.- Waterproofing Products: Bridge decks.- Meetings of boards.- Resins anchors.- Products related to concrete for bridges.- Paintings carbonation.- Release agents.- Separators.- Additives.- Paintings carbonation.
2
STRUCTURAL REINFORCEMENT- Carbon fiber.- Resins.- Repair mortars.- Injection resins.
STUFFED AND ANCHORS- Resins- Expandable Mortar Grout.- Polyester resins, epoxy acrylates, etc..
JOINTS- Polyurethane caulk.- Fund board.- Primers.- Silicones.- Polyurethane Foams
BUILDING PRODUCTS MORTARS- Bonding slurry.- Resins permanent tack.- Mesh mortar.- Latex.- Plasticizer-air entraining.- Water-repellent.
ALL KINDS OF MORTAR- Mortars Theming.- Refractory Mortars.- Mortars monolayer.- Mortar grouting.- Mortars Cola
- Mortars Grouts, Expandable, Anchorage, Fillers.- Mortars Microhormigones.- Repair Mortars.- Self-leveling mortars.- Mortars Waterproofing.
Concrete and MORTAR- Curators.- Waterproofing.- Release agents.- Versatile.- Superplasticizer.- Accelerators.- Retardants.- Silica fume.- Corrosion inhibitors.- Self-leveling.- Plasticizers.- air-entraining- Lightweight aggregates.- Polystyrene beads.
VARIOUS- Geotextiles.- Products antigrafittis.- Degreasers.
3
THERMAL, ACOUSTIC INSULATION AND REFLECTIVE- Plate heat-reflective.- Rock wool.- Glass wool.- Extruded and Expanded Polystyrene.- Prints Anti-impact.
PASSIVE FIRE PROTECTION- Mortars Fireproof, intumescent coatings, fire protection plates.- Sealing systems for installations, putty pads, grills, collars.- System protection and manufacturing exhaust ventilation ducts.- Pipeline systems for conducting wires.- Systems divisions (partitions, ceilings continuous, meeting bands, protecting floors, etc ...).- Fire doors, firewall logs, firewall fixed, etc.
PAVEMENT- Polyurethane Flooring Systems.- Systems epoxies pavings.- Stamped concrete, concrete spray 3mm layer printed walking.- Concrete products fratasados: pigments, silicas, Coridon,fibers, curators, etc..- Self-leveling Mortars: pedestrian and industrial.- Diamond cutting discs. Cortes murals. Saca witnesses.- Slurys acrylics, epoxies and asphalt.- Rubber Flooring, slurrys.- Flooring aggregates seen, deactivating.- Aggregate Binders.- Asphalt pavements, asphalt slurrys.- Resins flooring protection.- Wearing courses, aggregates, silica, corundum, marble
WATERPROOFING- Asphalt sheets.- Print PVC.- Plate EPDM.- Waterproofing Paints, acrylic paints, rubber, antigoteras. polyurethanes- Waterproofing system polyurethane paint.- Bithutene. Adhesive films.- Fishnet painting.- Bituminous emulsions- Primers repellent for facades and floors.- Primers oleo-repellent soils and facades.
FOUNDATION- Prints PVC.- System autoanclables sheets to concrete Prepufe System- Vapor barriers.- Paint asphalt, rubber asphalt paints.- Prints draining.
- Asphalt sheets.- Geogrids.- Geotextiles.- PVC Tapes concreting.- Profiles hidroexpansivos.- Separators.
POOLS AND DEPOSITS- Mortars tail.- Mortars flexible tail.- Ceramic grouts.- Waterproofing mortars.- Mastic joint sealing.- Profiles hidroexpansivos.- PVC Tapes concreting.- Repair mortars for coving.- Sealing of sprats: Rivestop, resins.- Resins and sealants to repair cracks and ceramic stuck underwater.- Water-repellent glass for concrete.- Anchoring and bonding resins.
CONCRETE, TUNNELS AND EMBANKMENTS- Bridging.- Polypropylene fibers and steel, structural fibers.- Additives superplasticizer.- Plastifiers.- Air-entraining agents.- Self-Leveling Additives- Waterproofing Additives- Polyfunctional additives- Accelerators for shotcrete. Stabilizers.- Nanosílices and silica fume.- Pigments.- Resins anchors.- Geogrids and geotextiles.- Release agents.- Separators.- Paintings carbonation.
BRIDGES- Support points: Wetsuits.- Waterproofing Products: Bridge decks.- Meetings of boards.- Resins anchors.- Products related to concrete for bridges.- Paintings carbonation.- Release agents.- Separators.- Additives.- Paintings carbonation.
Presentation
Index
4
PRODUCT PAGE
Index
5
Index
6
For any questions please contact our
Technical Department
Product Family Index
SEALING PRODUCTS
POLYURETHANE MASTICS- Techmoflex 11 PS- Techmoflex Industria- Techmoflex Hidroexpansivo
SILICONES- Techmosil Neutra- Techmosil Acética
POLYURETHANE FOAM- Techmo Expand N750- Techmo Expand P750- Techmo Expand Tejas- Techmo Expand Limpiador
Sealing Systems- Techmocinta PVC E- Techmoperfil Hidroexpansivo P- Techmoperfil Hidroexpansivo Salina WH- Techmo Sellastop Spadín- Techmo Cordón Asfáltico- Techmo Asfalt Sellador- Techmo Barrera Vapor
Complementary Products- Fondos de Juntas- Techmo Primer 1
121212
- Techmonotop Cosmetic R2- Techmonotop 700 Fix
WATERPROOFING- Techmoseal 531- Techmoseal 553 IMP- Techmoseal 531 IMP- Techmoseal 550 Super Elastic 2C- Techmoseal 550 IMP- Techmoseal 573 Mortero Rápido- Techmoseal 573 Mortero Rápido R2- Techmoseal 511 Red Capilar- Techmoseal Adición
STUFFED, ANCHORS, EXPANDABLE GROUT- Techmo Grout 21- Techmo Grout 21 Construcción- Techmo Grout 51- Techmo Grout 51 Construcción- Techmo Grout 55 Fast- Techmo Grout 55 Fast Black- Techmo Grout Filler
LEVELING- Techmo Level 180- Techmo Level 250- Techmo Level 280- Techmo Level 300 IFS- Techmo Level 355
TILE ADHESIVES- Techmocol MC- Techmocol MC 100- Techmocol MC 200- Techmocol MC 301- Techmocol Flex MC 501 Blanco- Techmocol Flex MC 401- Techmocol Termoacústico- Techmocol Flex MC 601- Techmocol MC Escayola- Techmocol MC Yeso- Techmocol MC Exterior Capa Gruesa- Techmocol MC 331
DRY MORTAR- Techmorsec M-7,5- Techmorsec M-7,5 Fino- Techmorsec M-10- Techmorsec M-25- Techmorsec M-30 SR
MICROCONCRETE- Techmocret HA-25 Blanco- Techmocret HAC-45- Techmocret HA-30
MORTAR GROUTING- Techmojunt
MONOCAPA- Techmonocapa Acabado Fino- Techmococapa Acabado Piedra- Techmonocapa Acabado Raspado
THEMING MORTAR- Techmo Artek 1
REFRACTORY MORTAR- Techmo Refrac
7
PRINTED MORTAR
PAGE
PRINTED MORTAR- Techmocrom Impreso- Techmocrom Impreso Basic
1212
12121212
13131313131313
1313
RESINS
STUFFED AND ANCHORS- Techmofix 1000- Techmofix 2000- Techmofix 3000- Techmofix 4000- Techmodur Anclajes- Techmodur Masilla Polivalente- Techmodur Masilla Polivalente Hydro
BRIDGES OF UNION- Techmodur Lechada de Adherencia- Techmodur Unión 31- Techmodur Unión 32F- Techmodur Unión 32N- Techmodur Latex- Techmodur Latex S360- Techmodur Resin A-500
INJECTION- Techmodur Inyección- Techmodur Inyección Aquareactiva Flex- Techmodur Inyección Aquareactiva
14141414141414
14141414151515
151515
ARMOUR PROTECTIONARMOUR PROTECTION
- Techmonotop 610 Pasivante- Techmoepox 615 Pasivante 2C
1515
MORTAR
REPAIR- Techmodur 40 Mortero Reparación- Techmonotop 693- Techmonotop 692 Fluid- Techmonotop 693 Constucción- Techmonotop 694 Construcción- Techmonotop 699- Techmonotop 699 Construcción- Techmonotop 695 Fast- Techmonotop 696 SFG- Techmonotop Cosmetic
16161616161616161616
1616
171717171717171717
1 71 81 81 81 81 81 8
1 81 81 81 81 8
1 91 91 91 92020202020202020
2222222222
222222
22
232323
23
23
2424
Product Family Index
8
SCREED MORTAR- Techmocrom Screed
RELEASE AGENTS- Techmocrom Desmoldeante- Techmocrom Desmoldeante Basic
MOLDS- Techmocrom Moldes
PROTECTIVE RESIN- Techmocrom CM-ESP Brillante- Techmocrom CM Mate- Techmocrom EBT- Techmocrom FRC
- Techmofrol 100- Techmofrol EPA- Techmofrol Mineral- Techmofrol Vegetal 110- Techmofrol Vegetal 111- Techmofrol Vegetal 112 Ecológico- Techmofrol Cera- Techmofrol Rápido
WATERPROOFING- Techmofuge P- Techmofuge 1- Techmofuge 1 ADMIX- Techmofuge 1 Precast- Techmofuge 2 Precast- Techmofuge HI- Techmofuge N
POLYFUNCTIONAL- Techmoment 920- Techmoment 928 GV- Techmoment 930- Techmoment 932- Techmocrete 1001- Techmocrete 1002- Techmocrete 1003- Techmocrete 1004- Techmocrete 1005
PLASTICIZERS- Techmocem W 90- Techmocem 2- Techmoprecast P00- Techmoprecast P18- Techmoprecast P22- Techmoprecast P31
SUPERPLASTICIZERS- Techmocem 120- Techmocem 200R- Techmocem 204R- Techmocem 205- Techmocem 500- Techmocrete C703- Techmocrete C704- Techmocrete CS704- Techmoprecast S10- Techmoprecast S20
AIR ENTRAINING / RETARDANTS- Techmo Mort-Plast- Techmo Mort-Plast G-3- Techmo Retard Hormigón- Techmo Retard Hormigón H77R- Techmo Retard Mortero- Techmo Air Retard Mortero- Techmo Air Retard Mortero RM50- Techmo Air Retard Mortero RM65
ACCELERATORS- Techmo Acelerante- Techmo Acelerante MA103
LEVELING- Techmo Nivel G-92- Techmo Nivel S-93- Techmo Nivel M-1
OTHER ADDITIONS- Techmo Perlas de Poliestireno Expandido- Techmo Arcilla Expandida G12/20- Techmo Arcilla Expandida M4/10- Techmo Antigel- Techmo Fume SD92- Techmo Nanosilice
24
2424
25
26262626
* DYE FOR CEMENT
PIGMENT- Techmo Pigmentos 26
FIBRES
POLYPROPYLENE FIBERS- Techmofiber M-12- Techmofiber M-6- Techmofiber E-12- Techmofiber E-6- Techmofiber E-3- Techmofiber Plus 6mm.- Techmofiber Estructural 50 mm.
STEEL FIBERS- Techmofiber Acero 36/0,7- Techmofiber Acero 50/1,0- Techmofiber Acero Ondulada Redonda 50/1,0- Techmofiber Acero Ondulada Plana 50/2,5
CELLULOSE FIBERS- Techmofiber Cellulose 450- Techmofiber Cellulose 315
2727272 7272727
27272727
2727
AGGREGATES
WEARING COURSE- Techmorod Silice- Techmorod Corindón- Techmorod Cuarzo Corindón 25%- Techmorod Cuarzo Corindón 50%- Techmorod Microesferas de Vidiro- Techmorod Granza de Caucho
AGGREGATES- Techmo Marmolina- Techmo Dolomita
282828282828
2828
ADDITIVES
CONSERVATORS- Techmocure C- Techmocure E- Techmocure RA- Techmocure RP- Techmocure WR
PARTING- Techmofrol E-25- Techmofrol 50- Techmofrol 75
2929292929
292929
2929303030303030
30303030313131
313131313232323232
323232323233
33333333343434343434
3434343535353535
3535
353535
363636363636
Product Family Index
9
FILMS
ANTI-IMPACT FILMS- Techmo Lam Impact- Techmo Lam Impact Plus- Techmo Lam Impact NOVO- Techmo Lam Impact Parquet- Techmo Lam Impact Foam + Aluminio 1 cara- Techmo Lam Impact Aluminio 2 caras- Techmo Lam Impact Silent Plus
INSULATING SHEETS- Techmo Lam Termic
BLADES DRAINAGE- Techmo Lam Dren Max- Techmo Lam Dren Geotextil- Techmo Boton Lam Dren Max
SEALING BANDS- Techmo Bituband 5000HD- Techmo Bituband 5000HD ALU- Techmo Butilband Geotex 300- Techmo Butilband Geotex 150
GEOTEXTILES
POLYPROPYLENE GEOTEXTILES- Techmo Geotex PP
POLYESTER GEOTEXTILES- Techmo Geotex PES
37373737373737
37
383838
38383838
38
38
MESH
MESH- Techmotex Malla Balizamiento- Techmotex Malla Ocultación 100%- Techmotex Malla Ocultación 70%- Techmotex 99 Revoco Mortero- Techmotex Fill 77 Malla Pintura- Techmotex 44 Malla Yeso- Techmotex Velofill 99
39393939393939
STRUCTURAL REINFORCEMENT SYSTEMS
CARBON FIBERS. BOOSTER BLADES- Techmo Carbolam L-50/1,2- Techmo Carbolam L-60/1,2- Techmo Carbolam L-100/1,2- Techmo Carbolam L-120/1,2- Techmo Carbolam L-50/1,4- Techmo Carbolam L-60/1,4- Techmo Carbolam L-100/1,4- Techmo Carbolam L-120/1,4- Techmodur Carbolam R-20- Techmodur Cabolam Imprimación
CARBON FIBERS. STRAPS- Techmo Carboband B-30/225- Techmo Carboband R-30- Techmo Carboband Imprimación
40404040404040404040
404040
COATINGS PROTECTION AND WATERPROOFING
BITUMINOUS EMULSIONS- Techmo Asfalt-AS- Techmo Asfalt-A2- Techmo Asfalt-Caucho- Techmo Asfalt F
41414141
WATERPROOFING PAINTS. MONOCOMPONENT- Techmo Imper 420- Techmo Imper 430R- Techmo Imper 500 Poliuretano- Techmo Imper 500 Alifático Poliuretano- Techmo Imper 501 POL Aqua- Techmo Imper 502- Techmo Imper 503 POL
WATERPROOFING PAINTS. BICOMPONENT- Techmo Imper 510- Techmo Imper 512 B- Techmo Imper 515- Techmo Imper 516 Poliurea- Techmo Imper 517 Poliurea Híbrida
HYDROPHOBIC IMPREGNATIONS- Techmo Hidrosil AQUA- Techmo Hidrosil 304 F- Techmo Hidrosil 304- Techmo Hidrosil Oilstop- Techmo Hidrosil Gres- Techmo Mineralizador- Techmo Anti Graffitti- Techmo Limp Graffitti
41414141414142
4242424242
4343434343434343
PAVEMENT SYSTEM. ASPHALT AND ACRYLIC
ASPHALT PAVEMENTS- Techmo Asfalto en Frio- Techmo Slurry Asfáltico
ACRYLIC FLOORING- Techmo Slurry Acrílico
4444
44
PAVEMENT SYSTEM. EPOXYEPOXY FLOORING
- Techmoepox Autonivelante- Techmoepox Suelos- Techmoepox W- Techmoepox Autonivelante W- Techmoepox Multicapa- Techmoepox Multicapa W- Techmoepox Multicapa AL
PRIMERS- Techmoepox Imprimación- Techmoepox W Imprimación- Techmoepox Imprimación Humedad- Techmoepox Imprinación Cerámica- Techmoepox W 1670
44444444454545
4545454545
POLYURETHANE FLOORING SYSTEMS
POLYURETHANE PAVIEMNTOS- Techmopol Protec 40 2C- Techmopol Protec 60- Techmopol Protec W Brillante- Techmopol Protec W Mate- Techmopol Protec Piscinas- Techmopol Suelos- Techmopol Autonivelante- Techmopol Antonivelante Flex
BINDERS AND ADHESIVES- Techmopol Ligante de Áridos- Techmopol Ligante de Áridos ESP- Techmopol Ligante Caucho- Techmopol Adhepur 100
4646464646464646
46464747
Product Family Index
10
PRIMERS- Techmopol Imprimación Poliuretano- Techmopol Imprimación Epox Humedad- Techmopol Imprimación Epox 100- Techmopol Imprimación Tapa Poros
ADDITIVES- Techmopol Aditivo Acelerante- Techmopol Aditivo Acelerante Super- Techmopol Aditivo Anti-Slip- Techmopol Aditivo Mateante- Techmopol Aditivo Tixotropante- Techmopol Aditivo Espesante- Techmopol Cera Brillante- Techmopol Cera Mate- Techmopol Pasta Color W- Techmopol Pasta Color Disolvente
ARMOR FOR VERTICAL SEPARATION- UNI Rueda
BASED CONCRETE STRIPPERS- BK KNOCHEN con alambre- BK KNOCHEN sin alambre- ABS sin alambre- ABS con alambre
SPACERS FOR FORMWORK AND ACCESSORIES- SK CONO- ST TAPÓN- SK ROSETA- RST TAPÓN ESTANCO- RSR TUBO
PROFILE FOR MAKING CHAMFERS- Berenjeno o Perfil Triangular
STRIPPERS FOR LARGE PRECAST- STAPELPLATT
SAFETY AND SECURITY- Tapón de Seguridad- Soporte Quitamiedos
47474747
47474747484848484848
PAINTINGS
PLASTIC PAINTS- Techmocolor Pintura Interior Lavable- Techmocolor Pintura Interior Especial- Techmocolor Pintura Especial Fachadas- Techmocolor Pintura Fachadas Extra
PAINTINGS STONE- Techmocolor Revestimiento Petreo Liso- Techmocolor Revestimiento Petreo Rugoso
SPORTS PAINTINGS- Techmocolor Sport Tennis- Techmocolor Slurry T
PAINTINGS FOR POOLS- Techmocolor Sport Piscinas- Techmocolor Sport Piscinas Poliéster
SILICATE PAINTS- Techmopint Silicato- Techmopint Imprimación Silicato
ADDITIONAL PAINTINGS- Techmocolor Trafic Señalización Vial- Techmocolor Sellador Acrílico- Techmocolor Sellador Acrílico Especial- Techmocolor Aditivo Antimoho
49494949
4949
4949
5050
5050
50505050
SOLVENTS AND STRIPPERS
SOLVENTS- Techmopol Disolvente SA 100- Techmopol Disolvente SA 100 Retard- Techmopol Disolvente Universal
STRIPPERS- Techmo Decapante
515151
51
SPECIAL FLOORS
SLAB FILTER- Techmo Losa Filtrante 51
SEPARATORS AND SPACERS
ARMOR FOR HORIZONTAL SEPARATION- ASK TORRE- AL/2 Barra- Zick-Zack- Separador Vigueta
52525252
52
52525353
5353535353
54
54
5454
HYGIENE AND CLEANING
HYGIENE- Techmo Papel Secamanos Industrial- Techmo Soporte Bobina de Pie (Trípode)- Techmo Soporte Bobina de Pared (Mural)- Techmo Jabón Crema Desengrasante para Manos
CLEANING- Techmo Limp A- Techmo Limp S- Techmo Limpiagres- Techmo Limp Epox- Techmo Limpoleo- Techmo Limp Desengrasante- Techmo Limp Multinox Quitagrasas- Techmo Limp Clean- Techmo Sepiolita
55555555
555555555555555555
Techmo, Total Solutions
APPLICATION SOLUTION TECHMORepair concrete pillars.
Screeds on pillars.
Waterproofing of basements, swimming pools, drinking water tanks.
Waterproofing cracked pools, basements, water tanks and supports which can undergo movements.Concrete walls slightly absorbent coating mortar for later.
Insufficient or degraded dusty surface for subsequent coating with mortar.
Repair tunnels.
Plugging waterways.
Chipping on the concrete surface, surface smoothing concrete surfaces.
Spalling in concrete walls or repair damaged concrete aesthetic.
Sealing of expansion joints.
Self compacting concrete seen color white, floors, pillars, elements difficult step for a conventional concrete or which require a high aesthetic level.
Solera Autonivelante passable and reversible in 48 h.
Paste rockwool and fiberglass.
High strength plaster.
Fast anchors.
Techmonotop 693 or Techmonotop 693 Construcción
Techmo Grout 51 or Techmo Grout 51 Construcción
Techmoseal 531Techmoseal 531 IMPTechmoseal 550 IMP 2 CTechmoseal 553 IMPTechmodur Unión 32 N, Techmodur Unión 32 F or Techmodur Resin A-500
Techmodur Unión 32 F
Techmonotop 693 or Techmonotop 639 Construcción
Techmoseal 573 Mortero Rápido
Techmo Level 180 (Tráfico Peatonal) Techmo Level 355 (Tráfico Industrial) Techmo Level 300 IFS
Techmonotop Cosmetic
Techmoflex 11 PS
Techmocret HAC-45
Techmo Level 250, Techmo Level 280
Techmocol MC - Termoacústicos, Techmonotop Cosmetic
Techmonocapa M-25
Techmofix-3000
TABLE OF TECHMO SOLUTIONS
11
TABLE OF TECHMO FAMILY
NAME FAMILY
Techmo AceleranteTechmo AirTechmo AsfaltTechmo CarboTechmocemTechmocolTechmocolorTechmocretTechmocrom
TechmocureTechmodur
Techmoepox
Techmo ExpandTechmofiberTechmofixTechmoflexTechmofrolTechmofugeTechmo GeotexTechmo Grout
Accelerating admixturesAir-entraining agentsPaints and asphalt emulsionsStructural reinforcement systemSuperplasticizers additivesMortars queuePlastic paints, acrylicMicrohormigonesPrinted mortar system. Desmoldantes,resins and moldsConcrete CuratorsResins Union Bridges and Anchors,epoxy mortarsPaintings and decorative epoxy flooring system
Polyurethane FoamsMetal fibers, polypropylene or celluloseAnchors ResinsPolyurethane SealantsPartingAdditives for concrete waterproofingPolypropylene or polyester geotextilesStructural filler fluid mortarsand anchors
Techmo HidrosilTechmo ImperTechmojuntTechmo Lam
Techmo LevelTechmomentTechmo NivelTechmonocapaTechmonotopTechmoperfilTechmo PigmentoTechmopol
TechmoprecastTechmo RetardTechmorodTechmosealTechmo SeparadoresTechmosilTechmo SlurryTechmotex
Hydrophobic impregnationsPaints waterproofingGrout groutingSheets for waterproofing and drainageimpact sound insulationLeveling mortarsPolyfunctional additivesLeveling mortar additiveMortars monolayerConcrete repair mortarsProfiles HidroexpansivosColoring for mortar and concretePaintings and decorative flooring system polyurethane
Additives prefabricatedRetardant additivesAggregates for surface courses in pavementsMortars waterproofingArmor SeparatorsSiliconesFloorcoverings acrylic and epoxy asphaltGrids plaster, paint, masking meshes
NAME FAMILY
WhiteTranslucentOther colors, consult
COLOR CAPACITY PACKAGING CONTAINER
300 ml.300 ml.300 ml.
25 uds.25 uds.25 uds.
CartridgeCartridgeCartridge
Techmosil Neutra Silicones
Putty-component, neutral silicone elastomer notch on unprimed aluminum and concrete seals in façade panels in toilets and kitchens.
Silicones
WhiteTranslucent
COLOR CAPACITY PACKAGING CONTAINER
300 ml.300 ml.
25 uds.25 uds.
CartridgeCartridge
Techmosil Acética Silicones Putty-component, silicone elastomer acetic acid crosslinking high quality seals in façade panels, in health and in kitchens.
Polyurethane MasticsPolyurethane Foam
SiliconesSealing Systems
Complementary Products
Polyurethane MasticsTechmoflex 11 PS Polyurethane Mastics
WhiteWhiteGrayGrayBlackBlackBrownBrown
COLOR CAPACITY PACKAGING CONTAINER
310 ml.600 ml.310 ml.600 ml.310 ml.600 ml.310 ml.600 ml
25 uds.12 uds.25 uds.12 uds.25 uds.12uds.25 uds.12 uds.
CartridgeSausageCartridgeSausageCartridgeSausageCartridgeSausage
TECHMOFLEX 11 PS is a putty-component polyurethane based glue and seal. Ranked elastomer notch. It is used for sealing expansion joints and static, such as concrete panels on the facade, aluminum, iron, wood, etc.
Techmoflex Industria Polímero MS
BlackGrayWhite
COLOR CAPACITY PACKAGING CONTAINER
290 ml. 25 uds. Cartridge
Monocomponent filler and silicone-free adhesive polymer based isocyanates hybrids suitable for bonding and sealing elements and automobile industry.
Techmoflex Hidroexpansivo Polímero MS
Cinzento
COLOR CAPACITY PACKAGING CONTAINER
310 ml. 25 uds. Cartridge
Hydroswelling-component sealing mastic or adhesive hidroexpansivos profiles.
Techmo Expand P750 Polyurethane Foam
Spray
USE PACKAGING CONTAINER
12 uds. Boat 750 ml.
Polyurethane expanding foam, especially suitable for stuffing and mounting isolation. Presents adhesion to all building materials, surfaces except polyethylene, Teflon, oils and greases, mold release agents and the like. Spray application.
Techmo Expand Tejas Polyurethane Foam
Manual
USE PACKAGING CONTAINER
12 uds. Flask 750 ml.
Polyurethane expanding foam, especially suitable for stuffing and mounting isolation.
Techmo Expand N750 Polyurethane Foam
Manual
USE PACKAGING CONTAINER
12 uds. Flask 750 ml.
Polyurethane expanding foam, especially suited for stuffing and mounting isolation. Presents adhesion to all building materials, surfaces except polyethylene, Teflon, oils and greases, mold release agents and the like. Manual application.
Polyurethane Foam
CAPACITY PACKAGING CONTAINER
500 ml. 25 uds. Flask 750 ml
Techmo Expand Limpiador Polyurethane FoamSpecial solvent for polyurethane foam and helpful (pistols, spatulas, utensils, etc). Cleaning must be performed before the foam hardens.
Sealing Products
12
Gauge 400Gauge 800Gauge 1200
TYPE COLOR WEIGHT SIZE
Black/Transp.Black/Transp.Black/Transp.
94 gr/m2188 gr/m2282 gr/m2
Roll 3x100 m.Roll 4x100 m.Roll 8x50 m.
Techmo Barrera de vapor Sealing Systems
Film low density polyurethane.
Sealing SystemsTechmocinta PVC E Sealing Systems
E DI-15E DI-19E DI-22E DI-24E DI-32E DI-40E DI-50
TYPE
PVC tapes for sealing expansion joints and work.
Expansion joint inside
Inside Job Board
E TI-19E TI-24
Expansion joint foreign
E DE-19E DE-24
SECTION WIDTH
15 cm.19 cm.22 cm.24 cm.30 cm.40 cm.50 cm.
19 cm.24 cm.
19 cm.24 cm.
COLOR
BlueBlueBlueBlueBlackBlueBlue
BlueBlue
BlackBlack
PRESENTATION
Roll 25 m.Roll 25 m.Roll 25 m.Roll 25 m.Roll 25 m.Roll 25 m.Roll 25 m.
Roll 25 m.Roll 25 m.
Roll 25 m.Roll 25 m.
Complementary ProductsFondos de Juntas Complementary Products
6 mm.10 mm.15 mm.20 mm.25 mm.30 mm.40 mm.50 mm.
DIAMETER METERS PRESENTATION CONTAINER
2500 m.1150 m.550 m.350 m.200 m.160 m.270 m.180 m.
RollRollRollRollRollStripStripStrip
BoxBoxBoxBoxBoxBoxBoxBox
Profiles polyethylene foam backer rod. They are used in the traditional bañilería, screen walls, prefabricated heavy or light, floor boards. With putties Techmo.
Techmo Cordón Asfáltico Sealing Systems
1,5 gr./ cm3
CONSUMPTION SIZE PRESENTATION
25 mm diameter50 cm length
Tiras de 0,5 m.
Mastic asphalt cold applied, high flexibility and adherence
WH 2005
WH 2010
DENOMINATION COLOR THICKNESS SIZE
Red/Black
Green
5 mm.
10 mm.
Techmoperfil Hidroexpansivo SALINA WH Sealing Systems
Hidroexpansivos profiles for controlled expansion joint sealing. Special saltwater
Roll 10 m.
Roll 5 m.
COLOR PRESENTATION
Black Box of 25 kg
Techmo Asfalt Sellador Sealing Systems
Mastic Bitumen, hot-applied modified.
Techmo Sellastop Espadín Sealing Systems
Techno Sellastop Spadin: 1.5 - 2 bars
Techno Sellastop Sprat for water tanks: 5 bars.
BlackGray
COLOR CONSUMPTION PRESENTATION
Unit by hole 30 + / - 5gr.
Ensures complete waterproofing of holes and grommets tubes resulting from the removal of formwork, the minimum life time is estimated at more than 30 years at a temperature of 15 ° C, keeping all their properties unchanged.
Plastic buckets of 500 units
WEIGHT
P 2005 W
P 2010 WP 2020 W
DENOMINATION COLOR THICKNESS SIZE
Red/Black
Red/BlackRed/Black
5 mm.5 mm.
10 mm.20 mm.
Roll 10 m.Rolo 15m.
Techmoperfil Hidroexpansivo P Sealing Systems
Hidroexpansivos controlled expansion profiles for sealing gaskets
Roll 15 m.Roll 5 m.
COLOR PRESENTATION
Consult 1l bottles
Techmo Primer 1 Complementary Products
Polyurethane Primer
Sealing Products
13
Polyurethane MasticsPolyurethane Foam
SiliconesSealing Systems
Complementary Products
Techmodur Masilla Polivalente Stuffed and AnchorsPutty application special on and off the water.
COLOR CONSUMPTION PRESENTATION
Blue/Yellow 1,6 kg/m2(a thickness of 1mm.)
Lot A+B0,5 kg., 1 kg., 2 kg., 10 kg. y 50 kg.
Techmodur Anclajes Stuffed and Anchors
Mortar three components for anchors and bearing plates filled, smooth consistency, composed of solvent-free epoxy resins and selected aggregates.
COLOR CONSUMPTION PRESENTATION
Grey Approx. 1,9 kg/m2 per mm. thick
Lot A+B+C 1,5 kg.Lot A+B+C 13 kg.
Stuffed and Anchors
Stuffed and AnchorsBridges of Union
InjectionResins
Dark Amber
COLOR PERFORMANCE PRESENTATION
Approx. 1.4kg/m2 per mm. of thickness
Lot A+B 1,2 kg.Lot A+B 10 kg.Lot A+B 25 kg.
Techmodur Unión 31 Bridges of Union Adhesive kissed two component solvent free epoxy resins for bonding building materials, concrete, mortar, natural or artificial stone, iron, aluminum, wood, agglomerated, polyester, epoxy, glass, etc.
Amber
COLOR PERFORMANCE PRESENTATION
Aprox. 0,3 kg/m2por mm de espessura
Lot A+B 1 kg.Lot A+B 12 kg.
Techmodur Unión 32F Bridges of Union
Two-component adhesive composed of fluid consistency epoxies, solventless, that applied to old concrete surfaces provides a perfect match with fresh concrete.
Amber
COLOR PERFORMANCE PRESENTATION
Approx. 1.4kg/m2per mm. Of thickness
Lot A+B 1,20 kg.Lot A+B 5 kg.Lot A+B 43 kg.
Techmodur Unión 32N Bridges of Union
Product bicomponent epoxy resin formulated without solvent. Its thixotropic consistency makes application easy and can be used on vertical surfaces, ceilings or horizontal, as well as all kinds of adhesive materials like mortar construction or regularization.
Bridges of Union
Yellow
COLOR PERFORMANCE PRESENTATION
0.3kg/m2 (undiluted)
Containers 6 kg.Containers 25 kg.
Techmodur Lechada de Adherencia Bridges of UnionBridge adherence to synthetic resins, mineral fillers and organic and inorganic additives to enhance anchoring cement based mortars and / or lime on concrete surface smooth or without absorption.
Techmofix 1000 Stuffed and Anchors
Grey
COLOR CAPACITY PACKAGING
300 cc.410 cc.
12 Cartridge12 Cartridge
Styrene free polyester resin for fast curing chemical anchors.
Techmofix 2000 Stuffed and Anchors
Grey
COLOR CAPACITY PACKAGING
380 cc. 12 Cartridge12 Cartridge
Epoxy Acrylate Resin bicomponent for chemical anchors. without styrene
Techmofix 3000 Stuffed and Anchors
Grey
COLOR CAPACITY PACKAGING
300 cc.380 cc.410 cc.
12 Cartridge12 Cartridge12 Cartridge
Epoxy Acrylate Resin for anclejes fast curing chemicals.
Techmofix 4000 Stuffed and Anchors
Grey
COLOR CAPACITY PACKAGING
400 cc. 12 Cartridge
Pure epoxy resin for chemical anchors.
Techmodur Masilla Polivalente Hydro Stuffed and AnchorsPutty special two-part underwater work.
COLOR CONSUMPTION PRESENTATION
Blue/White 1,6 kg/m2(a thickness of 1mm.)
Lot A+B 0,5 kg., 1 kg., 2 kg., 10 kg.
y 50 kg.
14
15
Yellow
COLOR CONSUMPTION PRESENTATION
Depends on treat cracks
Lot A+B 5 kg.
Techmodur Inyección InjectionHigh flow epoxy resin, solvent for reinforcement of concrete structures by injection into its cracks and crevices.
Injection
Consult
COLOR CONSUMPTION PRESENTATION
Depends on treat cracks
Lot A+B 25 kgLot A+B 200 kg
Techmodur Inyección Aquareactiva InjectionA novel two-component polyurethane system which reacts with water quickly, forming a foam of high mechanical properties and performance.
Consult
COLOR CONSUMPTION PRESENTATION
Depends on treat cracks
Resin 25 kg +2.5 kg accelerator
Techmodur Inyección Aquareactiva Flex InjectionA novel two-component polyurethane system which reacts with water quickly, forming a foam of high mechanical properties and performance.
Resins
Armour Protection
Armour ProtectionTechmoepox 615 Pasivante 2C Armour Protection
Two component exposy resin (red)
APPEARANCE
Bridging epoxy primer for protection and armor. (there is a version for spray application, consult our Technical Dept.).
PRESENT.CONSUMPTION
Approx. 0.75 to 1.25 kg/m2
Plastic containersof 1 kg. and 5 kg.
Techmonotop 610 Pasivante Armour Protection
Light Gray powder
APPEARANCE
Primer active armor protection and bridge for concrete mortar. Cementitious Base.
PRESENT.CONSUMPTION
Approx. 1.5 kg/m2 per mm. of thickness
Sets of1 and 5 kg.
Techmodur Resin A-500 Bridges of Union
Adhesion primer, acrylic resin based water based upon the application of all types of cement mortars, plasters, cements derivatives, casts. On absorption supports medium-high.
COLOR CONSUMPTION PRESENTATION
White Aprox. 0,125-0,150 kg/m2
Bottle of 1 kg.Bottle of 5 kg.Bottle of 25 kg.
Techmodur Latex Bridges of UnionSynthetic emulsion mixed with water used for making mortar or grout, achieving good adhesion and water resistance.
COLOR CONSUMPTION PRESENTATION
White Approx. 1 vol.Latex Techmo 2 Vol
of water by
Bottle of 5 kg.Bottle of 25 kg.
Techmodur Latex S360 Bridges of UnionSynthetic emulsion mixed with water used for making mortar or grout, achieving good adhesion and water resistance.
COLOR CONSUMPTION PRESENTATION
White Grout: appox. 0.130 kg/m2Mortar: 0.650 kg/m2
Bottle of 5 kg.Bottle of 25 kg.
Armour Protection
Stuffed and AnchorsBridges of Union
Injection
Mortar
Techmonotop Cosmetic Repair
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Máx. 5 mm. Bags of 25 kg.
Special cement mortar cosmetic repair and leveling in thin layers.
1.8 kg/m2 per mm. Of
thickness
Techmonotop Cosmetic R2 Repair
GreyWhite
COLOR CONSUMPTION APROX. PRESENTATION
0 - 5 mm. Bags of 25 kg.
Mortar fine for all surface repairs.
1.7 kg/m2 approx. Application to a
thickness of 1 mm.
Techmonotop 693 Construcción Repair
GreyWhite
COLOR CONSUMPTION APROX. PRESENTATION
10 - 40 mm. Bags of 25 kg.
Repair mortar based on hydraulic binders (PCC) shrinkage compensated thixotropic.
22 kg/m2
Techmonotop 693 Repair
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Min. 5 mm.Máx. 50 mm.
Bags of 25 kg.
Repair mortar based on hydraulic binders and resins.
1.8 kg. Dry mortar per m2 and mm. thick
Repair
Máx. 50 mm
Techmodur 40 Mortero Reparación Repair
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Lot A+B+C de 5 kg. - 12 kg.
20 kg.
Mortar for repair of three components, thixotropic consistency and epoxy resins consisting of solvent-free and selected aggregates.
1,8 kg/m2 por mm. de
espessura
50 mm. Max
Aprox. 10 mm. Aprox. 22
Techmonotop 694 Construcción Repair
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Lotes de A+B de 29 kg.
Thixotropic mortar polymerized (PCC) improved with synthetic resins.
10 - 40 mm. 22 kg/m2
1 - 4 cm. 19 kg /m2
Techmonotop 695 Fast Repair
GreyBlack
COLOR CONSUMPTION APROX. PRESENTATION
Bags of 25 kg.
Mortar-component structural repair of concrete, fast paste, passable at 2 hours.
19 kg/m25 - 50 mm.
Min. 15 mm.Máx. 50 mm.
1,80 kg mortero seco/m2 por
mm. de
Techmonotop 699 Repair
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Bags of 25 kg.
Repair mortar based on hydraulic binders and resins.
15 - 50 mm 2,1 kg/m2Aprox.
1 - 4 cm. 22 kg/m2
Techmonotop 699 Construcción Repair
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Bags of 25 kg.
Hydraulic Mortar polymerized (PCC) shrinkage compensated thixotropic.
LAYER THICKNESS
Min. 5 mm.Máx. 50 mm.
2,1 kg/m2Aprox.
1 - 4 cm. 19 kg /m2
Techmonotop 696 SFG Repair
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Bags of 25 kg.
Mortar-component structural repair of concrete with embedded corrosion inhibition.
19 kg/m25 - 50 mm.
Techmonotop 692 Fluid Repair
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Consult Bags of 25 kg.
Fluid mortar for concrete repair.
Consult
Techmonotop 700 Fix Repair
Grey
COLOR CONSUMPTION APROX. PRESENTATION
3 - 50 mm. Bags of 25 kg.
Mortar fine for all surface repairs.
Approx. 1.8 kg.Dry mortar per m2 and mm. of thick
16
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LevelingStuffed, Anchors, Expandable, Grout
WaterproofingRepair
Tile AdhesivesMicroconcrete
Mortar GroutingDry Mortar
Refractory MortarTheming Mortar
Monocapa
Mortar
Techmoseal Adición Waterproofing
White
COLOR CONSUMPTION APROX. PRESENTATION
Bottleof 8.5 l
Polymer dispersion to be added to 531 and conferring Techmoseal flexible properties.
1 bottle per bag of Techmoseal
531
Consult
Techmoseal 553 IMP Waterproofing
Grey
COLOR CONSUMPTION APROX. PRESENTATION
20 kg.
Mortar waterproof flexible, single component cement based formulation, special resins, additives and selected aggregates.
Thickness: 2 mm.Consumption: 3.2 kg/m2
(no water pressure)Thickness: 3 mm.
Consumption: 4.2 kg/m2 (with water pressure)
2 a 3 mm.
Techmoseal 573 Mortero Rápido Waterproofing
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Bags of 20 Kg.
Mortar Ultrafast setting (30-45 sec.) For plugging waterways.
2 gr. cm3 volume by
filling
Consult
Techmoseal 573 Mortero Rápido R2 Waterproofing
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Bags of 25 Kg.
Fast setting mortar for plugging waterways. Setting time: 30 sec.
ConsultConsult
Techmoseal 550 Super Elastic 2C Waterproofing
WhiteGrey
COLOR CONSUMPTION APROX. PRESENTATION
Lot A+B de 30 kg.
Mortar waterproof, elastic, flexible, two component applicable in potable water tanks. Movements designed to withstand water containment structures.
3,0 - 7,5 kg/m2
de 2 a 5 mm.
Techmoseal 511 Red Capilar Waterproofing
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Bags of25 kg.
Waterproofing of the capillary network of concrete and mortar.
2 kg/ m2/mmMin. 1 mm.
WaterproofingTechmoseal 531 Waterproofing
GreyWhite
COLOR CONSUMPTION APROX. PRESENTATION
Bags of25 kg.
Waterproofing mortar, cement-based, resin and silica fume. Suitable for contact with potable water.
3,08 - 4,5 kg/m2de 2 a 5 mm.
Techmoseal 550 IMP Waterproofing
GreyWhite
COLOR CONSUMPTION APROX. PRESENTATION
Lot A+B de 30 kg.
Mortar waterproof, flexible based bicomponent special cements, additives and selected aggregates that provide an extraordinary imperbeabilidad. SUITABLE FOR POTABLE WATER
2 a 5 mm.
Techmoseal 531 IMP Waterproofing
WhiteGrey
COLOR CONSUMPTION APROX. PRESENTATION
25 kg.
Single component waterproof mortar based on special cements, special resins, additives and selected aggregates that provide outstanding water resistance, excellent adhesion and sealing a great power of voids and pores.
4 kg/m22 mm.
Stuffed, Anchors,Expandable, GroutTechmo Grout 21 Stuffed, Anchors, Expandable, Grout
Grey
COLOR CONSUMPTION APROX. PRESENTATION
5 - 50 mm Bags of 25 kg.
Styrene free polyester resin frame for fast chemical anchors.
4 - 10 kg/,2
2 kg/m2/mm
17
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LevelingStuffed, Anchors, Expandable, Grout
WaterproofingRepair
Tile AdhesivesMicroconcrete
Mortar GroutingDry Mortar
Refractory MortarTheming Mortar
Monocapa
Mortar
Techmo Level 355 Leveling
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Bags of25 kg.
Formulated mixing cement, selected aggregates, polymeric resins, fibers and additives that give it a proper fluidity, excellent adhesion and minimal shrinkage, and a rapid development of resistance and fast drying.
5- 40 mm. 1,6 kg/m2/mm
Techmo Level 300 IFS Leveling
Grey
COLOR CONSUMPTION APROX. PRESENTATION
25 kg.
High strength mortar, self-leveling mix formulated with selected aggregates and cement, polymer resins and additives that give fast cure and high fluidity.
3- 30 mm. 1.6 kg/m2 for an application
thickness of 1 mm.
Techmo Level 280 Leveling
Grey
COLOR CONSUMPTION APROX. PRESENTATION
40 - 80 mm. Bags of 25 kg.
Pasta leveling CT-C20-F7 according to UNE-EN 13813.
2 kg/m2/mm.
Techmo Level 180 Leveling
Grey
COLOR CONSUMPTION APROX. PRESENTATION
25 kg.
Single component cementitious mortar for leveling adjustment and interior floors that will be covered later with finished ceramic, stone, carpet, flooring, etc.
5 - 20 mm 1,65 kg/m2/mm
Leveling
Techmo Level 250 Leveling
Grey
COLOR CONSUMPTION APROX. PRESENTATION
25 kg.
Single component cementitious mortar, leveling of great fluidity, which can be applied manually or pumped, getting a surface leveling prior to application of the finish.
5 - 25 mm 1,77 kg/m2/mm
Techmo Grout 51 Stuffed, Anchors, Expandable, Grout
Grey
COLOR CONSUMPTION APROX. PRESENTATION
15 - 50 mm Bags of 25 kg.
Non-shrink mortar for filling fluid and precision attachments.
2,2 kg/m2/mm
Techmo Grout 21 Construcción Stuffed, Anchors, Expandable, Grout
Grey
COLOR CONSUMPTION APROX. PRESENTATION
5 - 50 mm 2,2 kg/m2/mm Bags of 25 kg.
Non-shrink mortar to hydraulic fluid filled pressure and anchors.
Techmo Grout 51 Construcción Stuffed, Anchors, Expandable, Grout
Grey
COLOR CONSUMPTION APROX. PRESENTATION
15 - 50 mm Bags of 25 kg.
Non-shrink mortar to hydraulic fluid filled pressure and anchors.
2,2 kg/m2/mm
Techmo Grout 55 Fast Stuffed, Anchors, Expandable, Grout
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Bags of 25 kg.
Non-shrink thixotropic cementitious mortar high strength repairs, anchors and panels together.
2,2 kg/m2/mm15 - 50 mm
Techmo Grout 55 Fast Black Stuffed, Anchors, Expandable, Grout
Black
COLOR CONSUMPTION APROX. PRESENTATION
Bags of 25 kg.
Non-shrink cementitious mortar high early and final strengths for repairs, anchorages, joints board. Fast setting.
22 kg/m235 mm.
Techmo Grout Filler Stuffed, Anchors, Expandable, Grout
Grey
COLOR CONSUMPTION APROX. PRESENTATION
Bags of 25 kg.
Mineral fillers selected for making mortars grouts for filling large volume exceeding 50 mm
50 mm. 25 kg. Grout Techmo Filler per 50 kg. From Techmo Grout 51/21
18
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LAYER THICKNESS
LevelingStuffed, Anchors, Expandable, Grout
WaterproofingRepair
Tile AdhesivesMicroconcrete
Mortar GroutingDry Mortar
Refractory MortarTheming Mortar
Monocapa
ALIC
ATAD
OS
Examples:
- Coating unbound, anchored to the support: technical Flooring, floor placed on rails, etc..- Coating unattached, unanchored to support: Laminate flooring, carpet placed above the mortar without adhesion, etc.- Coating adhered, normal type: Placement of stoneware, marble, etc., With adhesives.- Coating adhered, special type: Laying carpet, linoleum, etc.., With adhesives.
E: ThicknessC: ResistanceA: Wear Resistance BöhmeRF: Fire resistance
Legend - self-leveling mortars Table
*TABLE OF RECOMMENDATIONS FOR USE SELF-LEVELING MORTARSCOATING / SUPPORT POLYETHYLENE CONCRETE HEATING SYSTEM
E 40 mm. C 20: Techmo Level 280
Unbound coating.Anchored to support
E: 5-40 mm.C 20: Techmo Level 250
Unbound coating.Not anchored to the support
High planimetry: E 40 mm.C 20: Techmo Level 280
High planimetry E: 5-40 mm.C 20: Techmo Level 250
High flatness. Without polypropylene fiber.No air-entraining E 50 mm.C 20: Techmo Level 280
Coating adhered.Normal rate
High flatness.E 40 mm.C 20: Techmo Level 280
Surface TreatmentE: 5-40 mm.C 20: Techmo Level 250
High flatness. Without polypropylene fiber.No air-entrainingE 50 mm.C 20: Techmo Level 280
Coating adhered.Special Type
High flatness.Surface treatment:E 40 mm.C 20: Techmo Level 280
High planimetrySurface TreatmentE: 5-40 mm.C 20: Techmo Level 250
High flatness.Without polypropylene fiber.No air-entrainingE 50 mm.C 20: Techmo Level 280
Coating seenRF Surface treatment declared E 40 mm.C 25, A 22: Techmo Level 280
RF Surface treatment declaredE: 5-40 mm.C 20: Techmo Level 250
RF Surface treatment declared. Without polypropylene fiber.Without air inclusionsE 50 mm.C 20, A 22: Techmo Level 280
Mortar
Tile Adhesives
Techmocol MC 100 Tile Adhesives
White
COLORCONSUMPTION
APROX. PRESENTATION
100% passes through the sieve 1mm.
Bags of 25 kg.
Tile adhesive type C-1 T for laying ceramic tiles and floorings medium and high absorption.
GRANULOMETRY
3,5 kg/m2
Techmocol MC Tile Adhesives
GreyWhite
COLORCONSUMPTION
APROX. PRESENTATION
0/1,5 Bags of 25 kg.
Tile adhesive for laying ceramic tiles and floorings medium-high absorption.
3,5 kg/m2
GRANULOMETRY
Techmocol MC 200 Tile Adhesives
GreyWhite
COLORCONSUMPTION
APROX. PRESENTATION
Bags of 25 kg.
Tile adhesive type C-TE.
3,5 kg/m2
GRANULOMETRY
100% passes through the sieve 1mm.
Techmocol MC 301 Tile Adhesives
WhiteGrey
COLORCONSUMPTION
APROX. PRESENTATION
Bags of 25 kg.
Adhesive cementation for ceramic tiles. Type C2-TE.
3,5 kg/m2
GRANULOMETRY
100% passes through the sieve 1mm.
19
LevelingStuffed, Anchors, Expandable, Grout
WaterproofingRepair
Tile AdhesivesMicroconcrete
Mortar GroutingDry Mortar
Refractory MortarTheming Mortar
Monocapa
Mortar
Techmocol MC Termoacústico Tile Adhesives
Grey
COLORCONSUMPTION
APROX. PRESENTATION
Bags of 25 kg.
Morteiro adesivo para colocar painéis de isolamento de lã mineral em cerramentos.
7 kg/m2
GRANULOMETRY
0/0,5
Techmocol MC Exterior Capa Gruesa Tile Adhesives
White
COLORCONSUMPTION
APROX. PRESENTATION
0/2 Bags of 25 kg.
Tile adhesive for indoor and outdoor installation Tile stoneware medium-low absorption. Type C1 T.
GRANULOMETRY
10 - 15 kg/m2
Techmocol MC Escayola Tile Adhesives
White
COLORCONSUMPTION
APROX. PRESENTATION
Consult Bags of 18 kg.
Special adhesive for bonding decorative pieces of plaster moldings, etc.
3,5 - 4 kg/m2
GRANULOMETRY
Techmocol MC Yeso Tile Adhesives
White
COLORCONSUMPTION
APROX. PRESENTATION
0/1 Bags of 25 kg.
Tile adhesive for laying tiles medium-high absorption indoors on gypsum plaster and plaster.
GRANULOMETRY
3,5 - 4 kg/m2
Techmocol MC 331 Tile Adhesives
White
COLORCONSUMPTION
APROX. PRESENTATION
Bags of 25 kg.
Special cementitious adhesive for bonding marble slabs and natural stone.
3 - 5 kg/m2
GRANULOMETRY
Consult
Techmocol Flex MC 401 Tile Adhesives
White
COLORCONSUMPTION
APROX. PRESENTATION
Bags of 25 kg.
Adhesive cementation for ceramic tiles Type C2 TE S1.
3,5 - 4 kg/m2
GRANULOMETRY
100% Passapelo
Tamis 1mm
Techmocol Flex MC 501 Blanco Tile Adhesives
White
COLORCONSUMPTION
APROX. PRESENTATION
Bags of 25 kg.
Adhesive cementation for ceramic tiles type C2 S1 according to UNE-EN 12004.
3,5 - 4 kg/m2
GRANULOMETRY
0/1
Techmocol Flex MC 601 Tile Adhesives
Grey
COLORCONSUMPTION
APROX. PRESENTATION
Bags of 25 kg.
Adhesive cementation for ceramic tiles type C2 FTE S1
3,5 - 4 kg/m2
GRANULOMETRY
ALIC
ATAD
OS
Legend - Table Mortars Cola
1. On irregular substrates (3 to 8 mm measured 2m rules.) Or direct placement on ceramics, utilizr special adhesive.2. It is highly advised in formats larger than 90 cm23. It may be necessary to support pretreatment.4. Adhesives are recommended for vertical applications reduced slip.5. To put into service or facilitate rapid drying in large formats, using fast-setting adhesives.6. Adhesives S1 or S2 according to the form and movements of the support parts (the piece weight of 2240 kg/m2 advisable s2)7. Use adhesives compatible with the plaster.8. Use deformable adhesives.
Formats upper 900 cm., Double-spread use. In case of application on highly absorbent substrates or high temperatures and wind, use adhesive open time.
Nomenclatura de uso com a norma UNE-EN—12004:C: cementitious adhesive.D: dispersion adhesive1: Normal Adhesive2: Enhanced AdhesiveT: reduced slipE: extended open time to 30 min.F: fast-setting adhesive
Nomenclature used in the UNE-EN-12002:S1: Adhesive deformable transverse deformation 2.5mm. and <5mm.S2: a deformable adhesive racking 5mm.
20
100% passes through the sieve 1 mm.
LevelingStuffed, Anchors, Expandable, Grout
WaterproofingRepair
Tile AdhesivesMicroconcrete
Mortar GroutingDry Mortar
Refractory MortarTheming Mortar
Monocapa
MortarAL
ICAT
ADOS
TABLE OF RECOMMENDATIONS FOR MORTER USE
SUPORTE / ABSORÇÃO MUITO BAIXA E 0,5 BAIXA 0,5 E 3 MÉDIO 3 E 10 ALTO E 10
INTE
RIOR
Ladrilho/Bloco Techmocol MC-EXT C11
Techmocol MC-EXT C11
Techmocol MC-EXT C11
Morteiro TechmocolMC-200 C1T
TechmocolMC-100 C1T
TechmocolMC Grey/TechmocolMC-22 Grey/White
TechmocolMC Grey/TechmocolMC-22 gris/blanco
Cerâmica de grande formato7
Techmocol MC-301 C2TE7
Techmocol MC-200 C1T7
Techmocol MC-YESO7
Techmocol MC-YESO7
Gesso7 Techmocol MC-301 C2TE
Techmocol MC-301 C2TE
Techmocol MC-YESO
Techmocol MC-YESO
Cartão deGesso Hidrófugo8
Techmocol Flex MC-501 C2TE S1
Techmocol Flex MC-501 C2TE S1
Techmocol Flex MC-501 C2TE S1
Techmocol Flex MC-301 C2TE
Cerâmica
Morteiro TechmocolMC-100 C1T
TechmocolMC Grey/TechmocolMC-22 Grey/White
TechmocolMC-100 C1T
Betão Techmocol MC-301 C2TETechmocolMC-402 C2FE
TechmocolMC-200 C1T
TechmocolMC-100 C1T
Cerâmica / Terraço Mármore3
Techmocol Flex MC-501 C2TE S1TechmocolMC-402 C2FE5
Techmocol MC-301 C2TETechmocolMC-402 C2FE5
Techmocol MC-301 C2TETechmocolMC-402 C2FE5
Betão Techmocol MC-301 C2TETechmocol FlexMC-402 C2FE
TechmocolMC-301 C2TETecmocol MC-402 C2FE
TechmocolMC-301 C1TE
Cerâmica / Terraço3 Techmocol Flex MC-501 C2TE S1Techmocol FlexMC-402 C2FE5
Techmocol Flex MC-501 C2TE S1Techmocol FlexMC-402 C2FE5
Techmocol Flex MC-501 C2TE S1Techmocol FlexMC-402 C2FE5
Morteiro Techmocol MC-301 C2TETechmocolMC-402 C2FE
Techmocol MC-100 C1T
TechmocolMC-200 C1T
Betão Techmocol Flex MC-402 C2FETechmocol FlexMC-501 C2TE S16
Techmocol Flex MC-402 C2FETechmocol FlexMC-501 C2TE S1
Techmocol Flex MC-402 C2FETechmocol FlexMC-501 C2TE S1
Morteiro TechmocolMC-301 C2TETechmocolMC-402 C2FE
TechmocolMC-301 C2TE
Techmocol Flex MC-402 C2FETechmocol FlexMC-501 C2TE S16
SOLA
DOS
ALIC
ATAD
OSSO
LADO
S
EXTE
RIOR
21
LevelingStuffed, Anchors, Expandable, Grout
WaterproofingRepair
Tile AdhesivesMicroconcrete
Mortar GroutingDry Mortar
Refractory MortarTheming Mortar
Monocapa
Mortar
Techmorsec M-7,5 Fino Dry Mortar
GreyWhite
COLORCONSUMPTION
APROX. PRESENTATION
Bags of30 kg
Dry mortar made with cement and / or lime, selected aggregates and additives that give it great workability, water retention and adherence.
8 kg/m2, for an application
thickness of 5 mm
7,5 N/mm2
Techmorsec M-30 SR Dry Mortar
Grey
COLORCONSUMPTION
APROX. PRESENTATION
Bulk: in silos of 24Tm
Mortar formulated portland cement-based SR type, selected aggregates and additives fluidifying controlled glanulometry that give a great workability, strength and power flow.
30 N/mm2 17 kg/m2, for an application
thicknessof 1 cm
Techmorsec M-7,5 Dry Mortar
WhiteGrey
COLORCONSUMPTION
APROX. PRESENTATION
Bags of30 kg
Dry mortar made with cement and / or lime, selected aggregates and additives that give it great workability, water retention and adherence.
RESISTENCE
RESISTENCE
17 kg/m2, for an application
thicknessof 1 cm
7,5 N/mm2
Dry Mortar
Techmorsec M-10 Dry Mortar
Grey
COLORCONSUMPTION
APROX. PRESENTATION
Bags of30 kg
Dry mortar made with cement, selected aggregates and additives that give it great workability, water retention and adherence, as well as minimal shrinkage.
LAYER THICKNESS
ConsultConsult
Techmorsec M-25 Dry Mortar
Grey
COLORCONSUMPTION
APROX. PRESENTATION
Bulk: in silos of 24Tm
Mortar formulated, selected aggregates and additives fluidifying controlled glanulometry that give a great workability, strength and power flow.
Consult Consult
Mortar GroutingTechmojunt Mortar Grouting
Yellow, Blue, Blue Sky,Blue Sea, Beige, Black, Bronze, Cream, Chocolate, Grey, Light Grey, Bone, Ivory, Brown, Black, Ochre, Red, Pink, Snuff, Emerald Green, Green Grass, Purple
COLOR CONSUMPTION APROX. PRESENTATION
30 kg.
Filling joints from 1 mm. to 15 mm. wide between ceramic tiles on any type of flooring or coating both inside and outside.
0,5 - 1,5 kg/m2
MicroconcreteTechmocret HA-25 White Microconcrete
White
COLOR CONSUMPTION APROX. PRESENTATION
5 - 50 mm 2.0 kg. Fresh mix per m2
and mm thick
Bags of 25 kg.
Styrene free polyester resin frame for fast chemical anchors.
LAYER THICKNESS
Techmocret HAC-45 Microconcrete
WhiteGrey
COLOR CONSUMPTION APROX. PRESENTATION
5 - 50 mm Bags of 25 kg.
Styrene free polyester resin frame for fast chemical anchors.
LAYER THICKNESS
2,2 kg/m2/mm
Techmocret HA-30 Microconcrete
WhiteGrey
COLOR CONSUMPTION APROX. PRESENTATION
5 - 50 mm Bags of 25 kg.
Preparation of micro concrete with cement, selected aggregates and special additives.
LAYER THICKNESS
2.2 kg. Fresh mix per m2
and mm thick
22
RESISTENCE
RESISTENCE
LevelingStuffed, Anchors, Expandable, Grout
WaterproofingRepair
Tile AdhesivesMicroconcrete
Mortar GroutingDry Mortar
Refractory MortarTheming Mortar
Monocapa
Mortar
*Table of recommendations for use mortar rendering / plastering. Monolayer (OC).TYPE OF APPLICATION TYPE OF WORKS MORTAR
INTERIOR (PLASTER)
EXTERNAL (REVOCOS)
Painted plaster.Layers of regularizationPlasters of interior partitions.Plasters internal enclosures.
Painted plasters.Plaster with other coatings.Protectors.
Unpainted plaster.Exterior plasters exposure to water and high winds.
CS II-WOCS III-WOCS IV-WO
CS III-WOCS III-W1CS IV-WOCS IV-W1
CS III-W1(OC) CS III-W2(OC) CS IV-W1(OC) CS IV-W2
ALIC
ATAD
OS
Legend table Monolayer
Nomenclature used in the UNE-EN-998-1:
- Compressive strength at 28 days (N/mm2):CS II: 1,5 - 5,0CS III: 3,5- 7,5CS IV: 6,0
- Water absorption by capillarity (kg/m2. 1/2 Min)WO: Not specifiedW1: 0,40W2: 0,20
Techmonocapa Acabado Fino Monocapa
Consult
COLORCONSUMPTION
APROX. PRESENTATION
Bags of25 kg.
Rendering and plastering mortar commonly used GP CS IV W2 under UNE-EN 998-1
LAYER THICKNESS
1,6 kg/m2/mmAprox. 15 mm.
Monocapa
Techmonocapa Acabado Raspado Monocapa
Consult
COLORCONSUMPTION
APROX. PRESENTATION
Bags of25 kg.
Mortar for plastering monolayer (OC) CS III W2 under UNE-EN-998-1.
LAYER THICKNESS
1,5 kg/mm/m2Aprox. 15 mm.
Techmonocapa Acabado Piedra Monocapa
Consult
COLORCONSUMPTION
APROX. PRESENTATION
Bags of25 kg.
Mortar for plastering OC CS III W2 monolayer under UNE-EN-998-1.
LAYER THICKNESS
1,5 kg/m2/mmAprox. 15 mm.
Theming MortarTechmo Artek K1 Theming Mortar
Consult
COLORCONSUMPTION
APROX. PRESENTATION
Bags of25 kg.
Mortar formulated with portland cement, selected aggregates and additives that give it great thixotropic, water retention and adherence, as well as hydrophobic compounds and fibers.
STRENGHT/COMPRESSION
2 kg/m2/mm15 N/mm2
Refractory MortarTechmo Refrac Refractory Mortar
Grey
COLORCONSUMPTION
APROX. PRESENTATION
Bags of25 kg.
Mortar formulated with portland cement, selected aggregates and additives that give it great thixotropic, water retention and adherence, as well as fibers and hydrophobic compounds.
1,8 kg/m2/mmWithout warming:- After 1 hour:> 7.0 N/mm2.
- After 28 days :> 25.0 N/mm2.
800 ° C with heating:- After 1 h : > 4.0 N/mm2
- After 28 days : > 6.0 N/mm2
23
STRENGHT/COMPRESSION
LevelingStuffed, Anchors, Expandable, Grout
WaterproofingRepair
Tile AdhesivesMicroconcrete
Mortar GroutingDry Mortar
Refractory MortarTheming Mortar
Monocapa
Printed PavementTechmocrom Impreso Printed Pavement
L-6 clay
Cream
Cork
Curo L-4
L-2 Pizara Gray
Mustard l-8
Black L-1
L-5 Walnut
Gold
Silver L-3
Red Tile
Red L-11
Green L-10
COLOR CONSUMPTION PRESENTATION
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Printed pavement durability, excellent resistance to weather and rapid commissioning work. Suitable for indoor and outdoor applications, including a wide range of designs.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
Techmocrom Impreso Basic Printed Pavement
L-6 clay
Cream
Cork
Curo L-4
L-2 Pizara Gray
Mustard l-8
Black L-1
L-5 Walnut
Gold
Silver L-3
Red Tile
Red L-11
Green L-10
COLOR CONSUMPTION PRESENTATION
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Paved printed for durability, excellent resistance to weather and quick implementation time. Suitable for indoor and outdoor applications, and a wide range of designs.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
4 kg/m2.
Printed ScreedTechmocrom Screed Impreso Screed
Clay L-6
L-4 Leather
Slate Gray L-2
L-8 Mustard
Black L-1
L-5 Walnut
Gold
Silver Gray L-3
L-11 Tile Red
Green L-10
COLOR (orientativo) CONSUMPTION PRESENTATION
Sacos 25 kg.
Sacos 25 kg.
Sacos 25 kg.
Sacos 25 kg.
Sacos 25 kg.
Sacos 25 kg.
Sacos 25 kg.
Sacos 25 kg.
Sacos 25 kg.
Sacos 25 kg.
Pavement little printed layer to 1 cm. thick, on pavements or damaged surfaces, high durability, excellent resistance to weather and putting into play, indoor and outdoor.
22 kg/m2 per cm of thickness
22 kg/m2 per cm of thickness
22 kg/m2 per cm of thickness
22 kg/m2 per cm of thickness
22 kg/m2 per cm of thickness
22 kg/m2 per cm of thickness
22 kg/m2 per cm of thickness
22 kg/m2 per cm of thickness
22 kg/m2 per cm of thickness
22 kg/m2 per cm of thickness
Release AgentsTechmocrom Desmoldeante Release Agents
Yellow
White
Cork
Light Grey
Grey
Brown
Mustard
Black
Red
Green
COLOR CONSUMPTION
Bags of 10 kg.
Bags of 10 kg.
Bags of 10 kg.
Bags of 10 kg.
Bags of 10 kg.
Bags of 10 kg.
Bags of 10 kg.
Bags of 10 kg.
Bags of 10 kg.
Bags of 10 kg.
Remover pavement powdered form.
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
Printed Concrete
Techmocrom Desmoldeante Basic Release Agents
????????
COLOR (orientativo) CONSUMPTION
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Remover pavement powdered form.
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
0,2 kg/m2
Printed PavementRelease AgentsPrinted Screed
MoldsProtective Resin
24
PRESENTATION
PRESENTATION
MoldsTechmocrom Moldes Molds
MODELOS
Techmocrom Moulds: Moulds printed flooring and facades (See other molds)
Examples of ApplicationThe product family Techmocrom allows the design of a new concept in urban landscapes, whether rustic or modern, for developments, walks, parks, squares, pedestrian streets, playgrounds, pools, fairgrounds, etc.
The main advantages are Printed Techmocrom Pavement durability, high resistance to inclement weather and fast commissioning work. A paviment adaptable to indoor and outdoor. High quality, solidity and design.
Printed ConcretePrinted Pavement
Release AgentsPrinted Screed
MoldsProtective Resin
25
Techmocrom CM-ESP Brillante Protective Resin
Bright Transparent
COLOR CONSUMPTION PRESENTATION
Colourless compound made from special resins, with excellent hardness, resistance to UV, moisture and abrasion, specifically formulated for use as a liquid curing and protective film and decorative printed pavement. With shiny appearance.
Bottle of 5 l.Bottle of 25 l.
5 m2/l.
Protective Resin
Techmocrom FRC Protective Resin
MateYellowish
COLOR CONSUMPTION PRESENTATION
Composite carefully balanced to provide the excellent cured concrete and maximize performance. Control the evaporation of water and hydration, slowing the drying time in order to increase its hardness characteristics.
Bottle of 25 l.10 - 12 m2/l.
Techmocrom CM Mate Protective Resin
Mate Yellowish
COLOR CONSUMPTION PRESENTATION
Composite made from special resins, with excellent hardness, resistance to UV, moisture and abrasion, specifically formulated fluid to be used as curing decorative and protective film on the pavement printed. With matte appearance.
Bottle of 5 l.Bottle of 25 l.
7 - 9 m2/l.
Techmocrom EBT Protective Resin
White liquid
COLOR CONSUMPTION PRESENTATION
Water-based resin with excellent hardness, resistant to UV, moisture and abrasion, specially formulated as a protective layer for the pavement printed. For curing pavement.
Bottle of 25 l.5 m2/l.
Printed Concrete
Techmo Pigmento Dye for Cement
COLOR (2%)
Expanded clay for the production of mortar and concrete thermal and acoustic insulation.
DOSAGE PRESENTATION
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 11,35 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Bags of 25 kg.
Yellow 21
Cobalt Blue 50
White 100
Black 905
Black 94
Brown 80
Brown 89
Red 41
Red 44
Green 65
Be applied 2% to 4% of the weight of the cement
according hue
Dye for Cement
Dye for Cement Pigment
Printed PavementRelease AgentsPrinted Screed
MoldsProtective Resin
26
Fibers
Techmofiber M-12 Polypropylene Fibers
Plus
6
900
Plus
6
900
100% polypropylene fiber, specially designed for use in concrete, prevents the appearance of shrinkage cracks motivated, substantially improving the quality of the concrete structure executed.
LENGTH PRESENTATIONCONSUMPTION
12 mm. 600gr/m3 Bags of 600 gr.Bags of 1 kg.
Techmofiber Plus 6 mm. Polypropylene FibersHomopolymer polypropylene fibers 100% virgin containing dispersant additives. Specially designed and manufactured under ISO for use as a concrete reinforcement min. 0.1% by volume.
LENGTH PRESENTATION
6 mm.
CONSUMPTION
600gr/m3 Bags of 900 gr.
Polypropylene Fibers
Polypropylene copolymer plastic fiber quality.
Techmofiber Estructural 50 mm. Polypropylene Fibers
50 mm.
LENGTH PRESENTATIONCONSUMPTION
Aprox. 3 - 6 kg/m3 Bags of 4 kg.
Techmofiber E-3 - Techmofiber E-6 Techmofiber E-12 Polypropylene Fibers
Polypropylene fiber to avoid fissures in the concrete.
LENGTH PRESENTATION
3 mm.6 mm.12 mm.
CONSUMPTION
600 gr/m3 Bags of 600 gr.
Steel FIbersPolypropylene Fibers
Cellulose Fibers
Techmofiber Acero 50/1,0 Steel Fibers
Fiber reinforcement wire for concrete, cold-deformed to allow optimum anchorage of the concrete mix Shotcrete special flooring, etc. *
20 kg/m3 concrete
Boxes de 20 kg.A= 1,00 mm.B= 50,00 mm.C= 2,00 mm.D= 5,00 mm.
CONSUMPTION PRESENTATIONSIZE
*For other sizes consult our Technical Department.
Steel FibersTechmofiber Acero 36/0,7 Steel Fibers
Wire fiber for reinforcing concrete, cold-deformed to allow optimum anchorage of the concrete mix Shotcrete special flooring, etc.
CONSUMPTION PRESENTATION
20 kg/m3 concrete
Boxes de 20 kg.
*For other sizes consult our Technical Department.
A= 0,70 mm.B= 36,00 mm.C= 2,00 mm.D= 5,00 mm.
SIZE
Techmofiber Acero Ondulada Plana 50/2,5 Steel FibersWire fiber for reinforcing concrete, cold-deformed to allow optimum anchorage of the concrete mix Shotcrete special flooring, etc.
CONSUMPTION PRESENTATION
20 kg/m3 concrete Boxes de 20 kg.
Techmofiber Acero Ondulada Redonda 50/1,0 Steel FibersWire fiber for reinforcing concrete, cold-deformed to allow optimum anchorage of the concrete mix Shotcrete special flooring, etc.
CONSUMPTION PRESENTATION
20 kg/m3 concrete Boxes de 20 kg.
Techmofiber M-6 Polypropylene Fibers100% polypropylene fiber, designed for use with mortar, thus avoiding the appearance offissures driven by traction and microcracking in the phase setting of the mortar.
LENGTH PRESENTATION
6 mm. 600gr/m3
CONSUMPTION
Bags of 600 gr.
Cellulose Fibers
Techmofiber Cellulose 315 Cellulose FibersPalletized semicomprimida cellulosic fiber.
CONSUMPTION PRESENTATION
View technical Boxes de 3 kg.Big bags of 500 kg.
Techmofiber Cellulose 450 Cellulose FibersCellulosic fiber organic additives.
Boxes de 3 kg.Big bags of 400 kg.
CONSUMPTION PRESENTATION
View technical
27
Aggregates AggregatesWearing Course
Techmorod Corindón Wearing Course
Corundum for special pavements, for wearing courses.
CONSUMPTION APROX. PRESENTATION
To trowelled:4 kg/m2
Bags of 25 kg.M2: 1- 2 mm.Consultar outrostamanhos
GRANULOMETRY
Techmorod Cuarzo Corindón 25% Wearing Course
Coloured cement based flooring with high quality aggregates, Bayer pigments and plasticizers and binders. (Refer colours).
Consult Bags of 25 kg.Seleccionada
COLOR PRESENTATIONGRANULOMETRY
Wearing CourseTechmorod Silice Wearing Course
Special silica resin flooring and plastering and realization of concrete.
CONSUMPTION APROX. PRESENTATION
0,150 - 0,115 mm.0,2 - 0,4 mm.0,2 - 0,8 mm.0,3 - 0,6 mm.
0,7 mm.1 - 2 mm.
0 - 3 mm.0 - 5 mm.3 - 5 mm.
GRANULOMETRY
Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.Bags of 25 kg.
To trowelled:4 kg/m2
For resins, consult the
product data sheet to combine Aggregates
Techmo Marmolina Aggregates
Calcite marble with light veining associated calcite muscovite flakes.
According to use Bags of 25 kg.0 - 0,9 mm.
CONSUMPTION APROX. PRESENTATIONGRANULOMETRY
Techmo Dolomita Aggregates
Mineral sedimentary rock composed of calcium carbonate and magnesium.
White Bags of 25 kg.Selected
COLOR PRESENTATIONGRANULOMETRY
Techmorod Cuarzo Corindón 50% Wearing Course
Coloured cement based flooring with high quality aggregates, Bayer pigments and plasticizers and binders. (Refer colours).
Consult Bags of de 20 kg.Seleccionada
COLOR PRESENTATIONGRANULOMETRY
Techmorod Granza de Caucho Wearing Course
Rubber crushed to prepare various floors.
Black Bags of 25 kg.1 - 4 mm.
COLOR PRESENTATIONGRANULOMETRY
Techmorod Microesferas de Vidrio Wearing Course
Glass Spheres dusting on or slip marking paints.
Transparent Bags of 25 kg.Seleccionada
COLOR PRESENTATIONGRANULOMETRY
28
Techmofrol 50 Parting
White milky liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 25 l.Cans of 200 l.Cages of 1.000 l.
Oil concrete release agents for emulsifiable in water. 50% solid
DOSAGE APPROX.
1L. for 38 m2
Techmofrol 75 Parting
White milky liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 25 l.Cans of 210 l.Cages of 1.000 l.
Oil concrete release agents for emulsifiable in water. 75% solids.
DOSAGE APPROX.
1L. for 25 m2
Techmofrol 100 Parting
Light Bellow oil
FISICAL APPEARANCE PRESENTATION
Bottle of 25 l.Cans of 210 l.Cages of 1.000 l.
Oil concrete release agents for emulsifiable in water. 100% solids.
DOSAGE APPROX.
1L. for 25 m2
PartingTechmofrol E-25 Parting
Milky oil
FISICAL APPEARANCE PRESENTATION
Bottle of 25 l.Cans of 200 l.Cages of 1.000 l.
Release agent which prevents adhesion of concrete or mortar to release agents.
DOSAGE APPROX.
1L. for 35 m2
Techmofrol EPA Parting
White liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 l.Bottle of 10 l.Bottle of 25 l.Cans of 210 l.Cages of 1.000 l.
Oil release agent for all kinds of formwork, mainly absorbers.
DOSAGE APPROX.
1L. for 20 – 40 m2
AdditivesParting
Conservators
WaterproofingPolyfunctional
Superplasticizers
Air Entraining/Retardants
LevelingAccelerators
Other Additions
ConservatorsTechmocure C Conservators
White Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 l.Bottle of 25 l.Cans of 200 l.Cages of 1.000 l.
Liquid curing fresh concrete.
DOSAGE APPROX.
150 - 200 ml/m2
Techmocure E Conservators
White Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 l.Bottle of 25 l.Cans of 200 l.Cages of 1.000 l.
Product based curing paraffins, fresh concrete and mortar.
DOSAGE APPROX.
150 - 200 ml/m2
Techmocure RA Conservators
White Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 l.Bottle of 25 l.Cans of 200 l.Cages of 1.000 l.
Liquid white pigmented curing concrete.
DOSAGE APPROX.
150 - 200 ml/m2
Techmocure RP Conservators
Translucent Yellowish Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 l.Bottle of 25 l.Cans of 200 l.Cages of 1.000 l.
Liquid Curing Concrete.
DOSAGE APPROX.
150 - 200 ml/m2
Techmocure WR Conservators
White Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 l.Bottle of 25 l.Cans of 200 l.Cages of 1.000 l.
Curing agent for concrete and mortar.
DOSAGE APPROX.
150 - 200 ml/m2
29
Additives
Techmofrol Vegetal 110 Parting
Light yellow liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 30kg.Cans of 220 kg.Cages of 1.000 l.
Strippers vegetable based.
DOSAGE APPROX.
1 L for 40 m2
Techmofrol Vegetal 111 Parting
Wight liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 kgBottle of 10 kgBottle of 25kg.Cans of 220 kg.
Release Agent for obtaining high quality finishes. It works by preventing the concrete adhering to the forms.
DOSAGE APPROX.
20 – 50 g/m2
Techmofrol Vegetal 112 Ecológico Parting
White liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 25kg.Cans of 220 kg.Cages of 1000 kg
Strippers biodegradable high performance concrete.
DOSAGE APPROX.
10 – 50 g/m2
Techmofrol Cera Parting
White emulsion
FISICAL APPEARANCE PRESENTATION
Bottle of 25kg.Cans of 220 kg.Cages of 1000 kg
Strippers low viscosity for precast concrete in all it seeks a smooth surface finish and flawless.
DOSAGE APPROX.
Consult
Techmofuge 1 Waterproofing
Yellow liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 kg.Bottle of 10 kg.Bottle of 25 kg.Drums of 200 kg.
Liquid Waterproofing mortar and concrete. Chloride free.
DOSAGE APPROX.
Mortar thickness 0.25 kg/m2/cm
Concrete: 3% of cement weight
Techmofuge 1 ADMIX Waterproofing
White liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 kg.Bottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Liquid repellent for concrete, mortar and cement pastes.
DOSAGE APPROX.
About 0.5-3.0% of cement
weight
WaterproofingTechmofuge P Waterproofing
Powder
FISICAL APPEARANCE PRESENTATION
Waterproof Waterproofing Powder for concrete and mortar.
DOSAGE APPROX.
1.5 to 3%of cement
weight
Bags of 20 kg.Bags of 25 kg.
Techmofuge 1 Precast Waterproofing
White liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 25 kg.Drums of 240 kg.Cages of 1000 kg.
Liquid repellent for concrete, mortar and cement pastes.
DOSAGE APPROX.
About 1 – 3.0% of cement
weight
Techmofrol Rápido Parting
Oily liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 25 L.Cans of 200 L.Cages of 1000 L.
Strippers for all types of precast concrete in which one intends to fast stripping.
DOSAGE APPROX.
Consult
Techmofrol Mineral Parting
Brown liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 l.Bottle of 10 l.Bottle of 25 l.Cans of 210 l.Cages of 1.000 l.
Strippers ore direct employment.
DOSAGE APPROX.
View technical
PartingConservators
WaterproofingPolyfunctional
Superplasticizers
Air Entraining/Retardants
LevelingAccelerators
Other Additions
30
AdditivesParting
Conservators
WaterproofingPolyfunctional
Superplasticizers
Air Entraining/Retardants
LevelingAccelerators
Other Additions
31
Techmofuge HI Waterproofing
Colourless liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 25 kg.Drums of 220 kg.Cages of 1200 kg.
Additive for concrete waterproofing.
DOSAGE APPROX.
About 0.5 – 25% of cement
weight
Techmofuge 2 Precast Waterproofing
White liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Additive special precast concrete waterproofing.
DOSAGE APPROX.
About 1 – 3.0% of cement
weight
Techmofuge N Waterproofing
Brown liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 l.Bottle of 10 l.Bottle of 25 l.Drums of 200 l.
Fluid additive plasticized concrete and waterproof. Chloride free.
DOSAGE APPROX.
About 0.5 % of cement
weight
Techmoment 928 GV Polyfunctional
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Bottle of 200 kg.Bottle of 1000 kg.
Plasticizer versatile high performance concrete.
DOSAGE APPROX.
About 0.4 – 1% of cement
weight
PolyfunctionalTechmoment 920 Polyfunctional
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Bottle of 200 kg.Bottle of 1000 kg.
High performance multifunctional additive for concrete preparation.
DOSAGE APPROX.
About 0.6 – 1.2 % of cement
weight
Techmoment 932 Polyfunctional
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Bottle of 220 kg.Cages of 1200 l.
Polyfunctional additive for concrete preparation.
DOSAGE APPROX.
About 0.4 – 0.8% of cement
weight
Techmoment 930 Polyfunctional
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Bottle of 200 kg.Cages of 1200 l.
Plasticizer versatile high performance readymix concrete.
DOSAGE APPROX.
About 0.5 – 1% of cement
weight
PartingConservators
WaterproofingPolyfunctional
Superplasticizers
Air Entraining/Retardants
LevelingAccelerators
Other Additions
32
Techmocem 2 Plasticizers
Dark liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 25 kg.Drums of 220 kg.Cages of 1000 kg.
Plasticizer / water reducer high performance concrete.
DOSAGE APPROX.
About 0.1% of cement
weight
Techmoprecast P00 Plasticizers
Reddish liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 220 kg.Cages of 1000 kg.
Rheology Modulator for prefabricated dry consistency. Implemented by vibro-compresion.
DOSAGE APPROX.
About 0.5 – 1.5 % of cement
weight
Techmoprecast P18 Plasticizers
Dark liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Plasticizer for prefabricated light.
DOSAGE APPROX.
About 0.5 – 1.5 % of cement
weight
Techmoprecast P22 Plasticizers
Yellowish liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Modulator rheology additive for dry consistency prefabricated applied by extrusion.
DOSAGE APPROX.
About 0.02 – 0.6 % of cement
weight
Techmocrete 1001 Polyfunctional
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Bottle of 220 kg.Cages of 1200 l.
Concrete Additive prepared polyfunctional.
DOSAGE APPROX.
About 0.5 – 1% of cement
weight
Techmocrete 1002 Polyfunctional
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Bottle of 220 kg.Cages of 1200 l.
Concrete Additive polyfunctional prepared.
DOSAGE APPROX.
About 0.5 – 2% of cement
weight
Techmocrete 1003 Polyfunctional
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Bottle of 220 kg.Cages of 1200 l.
Concrete Additive polyfunctional prepared.
DOSAGE APPROX.
About 0.5 – 2% of cement
weight
Additives
Techmocrete 1004 Polyfunctional
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Bottle of 220 kg.Cages of 1200 l.
Concrete Additive polyfunctional prepared.
DOSAGE APPROX.
About 0.5 – 3% of cement
weight
Techmocrete 1005 Polyfunctional
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Bottle of 220 kg.Cages of 1200 l.
Concrete Additive prepared polyfunctional.
DOSAGE APPROX.
About 0.5 – 3% of cement
weight
PlasticizersTechmocem W90 Plasticizers
Dark liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 30 kg.Bottle of 250 kg.Cages of 1250 kg.
Plasticizer / water reducer DIN EN 934.2
DOSAGE APPROX.
About 4.0 – 9.0% of cement
weight
PartingConservators
WaterproofingPolyfunctional
Superplasticizers
Air Entraining/Retardants
LevelingAccelerators
Other AdditionsAdditives
33
Techmocem 200R Superplasticizers
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 30 kg.Drums of 240 kg.Cages of 1200 kg.
Superplasticizer / high water reducing activity.
DOSAGE APPROX.
About 0.8 – 2 % of cement
weight
Techmocem 204R Superplasticizers
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 30 kg.Drums of 240 kg.Cages of 1200 kg.
Superplasticizer / high water reducing activity.
DOSAGE APPROX.
About 0.8 – 2 % of cement
weight
Techmoprecast P31 Plasticizers
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Modulator rheology additive for dry consistency prefabricated vibrocompression applied.
DOSAGE APPROX.
About 0.08 – 0.8 % of cement
weight
Techmocem 120 Superplasticizers
Brown liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 30 kg.Drums of 240 kg.Cages of 1200 kg.
Superplasticizer / water reducing high level according to DIN EN 934-2.
DOSAGE APPROX.
About 0.08 – 0.8 % of binder
weight
Superplasticizers
Techmocem 205 Superplasticizers
Consult
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 250 kg.Cages of 1200 kg.
Superplasticizer / water reducer high performance concrete.
DOSAGE APPROX.
Consult
Additives
34
Air Entraining / RetardantsTechmo Mort-Plast Plasticizers
Green Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 kg.Bottle of 10 kg.Bottle of 25 kg.
Additive liquid plasticizer / aerating, mortar, free from chlorides.
DOSAGE APPROX.
0.5% by weight of
binder
Techmocem 500 Superplasticizers
Liquid bluish-gray
FISICAL APPEARANCE PRESENTATION
Bottle of 25 kg.Drums of 220 kg.Cages of 1000 kg.
High Performance Superplasticizer for concrete.
DOSAGE APPROX.
About 0.6 – 3 % of cement
weight
Techmocrete C703 Superplasticizers
Greenish Liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Superplasticizer / water reducer high activity for self-compacting concrete.
DOSAGE APPROX.
About 0.9 – 2.5 % of cement
weight
Techmocrete C704 Superplasticizers
Turbid Yellowish
Liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Superplasticizer / high water reducing activity.
DOSAGE APPROX.
About 0.3 – 1 % of cement
weight
Techmocrete CS704 Superplasticizers
Turbid Yellowish
Liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Superplasticizer / high water reducing activity.
DOSAGE APPROX.
About 0.3 – 1 % of cement
weight
Techmoprecast S10 Superplasticizers
Yellowish Liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Additive superplasticizer, water reducer, high activity for precast concrete.
DOSAGE APPROX.
About 0.5 – 1.8 % of cement
weight
Techmo Mort-Plast G-3 Plasticizers
Dark Brown Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 kg.Bottle of 10 kg.Bottle of 25 kg.
Additive aerating / plasticizer for mortar free of chloride.
DOSAGE APPROX.
0.1 – 0.5% by weight of
binder
Techmo Retard Hormigón Retardants
Translucent Blue Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 30 kg.Drums of 250 kg.
Concrete set retarder.
DOSAGE APPROX.
0.5 – 2.5% on weight of cement
Techmoprecast S20 Waterproofing
Yellowish Liquid
FISICAL APPEARANCE PRESENTATION
BulkBottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Additive superplasticizer, water reducer high activity for precast concrete.
DOSAGE APPROX.
About 0.5 – 1.8 % of cement
weight
PartingConservators
WaterproofingPolyfunctional
Superplasticizers
Air Entraining/Retardants
LevelingAccelerators
Other Additions
Additives
35
Techmo Air Retard Mortero RM50 Retardants
Brown Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 kg.Bottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Retarder / aerating setting for mortar.
DOSAGE APPROX.
0,06-0,7% SPC
Techmo Retard Hormigón H77R Retardants
Translucent Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 30 kg.Drums of 250 kg.
Concrete set retarder.
DOSAGE APPROX.
0.2 – 2.5% on weight of cement
Techmo Air Retard Mortero Retardants
Brown Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 kg.Bottle of 25 kg.Drums of 200 kg.Cages of 1000 kg.
Retarder / aerating setting for mortar.
DOSAGE APPROX.
0.8 – 1% on weight of cement
Techmo Retard Mortero Retardants
Brown Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 6 kg.Bottle of 30 kg.Drums of 250 kg.
Additive retardant / water reducer DIN EN 934.2
DOSAGE APPROX.
2 – 3% on weight of cement
Techmo Air Retard Mortero RM65 Retardants
Translucent Blue Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5 kg.Bottle of 25 kg.Drums of 230 kg.Cages of 1200 kg.
setting retardant additive for mortar.
DOSAGE APPROX.
0.5 – 2.5% on weight of cement
AcceleratorsTechmo Accelerators Accelerators
setting accelerating admixture for concrete free of chlorides.
Translucent Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 30 kg.Drums of 250 kg.
DOSAGE APPROX.
1 – 4 % on weight of cement
Techmo Accelerators MA 103 Acceleratorssetting accelerator for mortar and concrete.
Greenish Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 30 kg.Drums of 250 kg.Cages of 1200 kg.
DOSAGE APPROX.
0.5 – 5% on weight of cement
Techmo Nivel S-93 Leveling
Yellow Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 5l.Bottle of 10l.Bottle of 25l.Drums of 200l.
superplasticizer additive effect for the preparation of cohesive self-leveling mortars.
DOSAGE APPROX.
1 – 3% on weight of cement
LevelingTechmo Nivel G-92 Leveling
Dark reddish Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 30 kg.Drums of 220 kg.Cages of 1100 kg.
Special additive for masonry mortar for leveling screeds.
DOSAGE APPROX.
0.3 – 5% on weight of cement
Techmo Nivel M-1 Leveling
Turbid Yellowish
Liquid
FISICAL APPEARANCE PRESENTATION
Bottle of 25kg.Drums of 200kg.Cages of 100kg
Additive effect superplasticizer cohesive for preparing high quality self-leveling mortars.
DOSAGE APPROX.
1.0 – 2.5 % on weight of cement
PartingConservators
WaterproofingPolyfunctional
Superplasticizers
Air Entraining/Retardants
LevelingAccelerators
Other Additions
Additives
36
Techmo Fume SD92 Other Additions
Gray powder
FISICAL APPEARANCE PRESENTATION
Addition of silica fume base.
DOSAGE APPROX.
Concrete high durability and resistance: 10% by
weight of cement.Concrete normal: 5-10% by
weight of cement.Shotcrete: 5% by weight of
cement
Bags of 20 kg.
Techmo Antigel Other Additions
Brown Liquid
FISICAL APPEARANCE PRESENTATION
Bulk tankDrums of 250l.Cages of 1000l.Cages of 1200l.
antifreeze additive for concrete and mortar.
DOSAGE APPROX.
0.5 – 2 % on weight of cement
Techmo Arcilla Expandida G12/20 Other Additions
Rounded clay lightweight aggregate
FISICAL APPEARANCE PRESENTATION
Bags of 50 l.Big-Bags
Expanded clay for mortar and concrete obtaining thermal and acoustic insulation.
DOSAGE APPROX.
View technical
Techmo Arcilla Expandida M4/10 Other Additions
Rounded clay lightweight aggregate
FISICAL APPEARANCE PRESENTATION
Bags of 50 l.Big-Bags
Expanded clay for mortar and concrete obtaining thermal and acoustic insulation.
DOSAGE APPROX.
View technical
Techmo Perlas de Poliestireno Expandido Other Additions
Beads for obtaining thermal and acoustic insulating mortar.
Pearl White
FISICAL APPEARANCE PRESENTATION
Bags of 400 lt.Bags of 500 lt.
DOSAGE APPROX.
1 bag of 400 l. concrete
Other AdditionsTechmo Nanosilice Other Additions
Consult
FISICAL APPEARANCE PRESENTATION
Bottle of 25 kg.Bottle of 200 kg.Drums of 1000kg
Suspension of nanosilica grading curves for correction.
DOSAGE APPROX.
Consult
PartingConservators
WaterproofingPolyfunctional
Superplasticizers
Air Entraining/Retardants
LevelingAccelerators
Other Additions
Films
Anti-Impact FilmsTechmo Lam Impact Anti-Impact Films
Techmo Lam Impact 3Techmo Lam Impact 5Techmo Lam Impact 10
DENOMINATION
Expanded polypropylene sheet, bristle closed soundproofing against impact noise.
ROLTHICKNESS
3 mm.5 mm.10 mm.
1,5 x 150 m.1,5 x 100 m.1,0 x 41 m.
Techmo Lam Impact Aluminio 2caras Anti-Impact FilmsPrint termoreflectora insulation consisting of a PE foam sheet with a double layer of aluminum.
ROLTHICKNESS
4 mm. 1,2 x 95 m.
Insulating SheetsTechmo Lam Termic Insulating Sheets
Insulators "traditional" are effective only acting on the heat received by conduction and convection, but do not act before the radiation heat transfer. LAM Techmo TERMIC insulators, are effective against all three types of heat transfer. Through its outer sheets of pure aluminum, reflect get 97% of the heat received by radiation, whereas with l / s foil / s of dry air internal to avoid temperature changes between both sides of the insulation and therefore heat transfer Conducted / convention.
DENOMINATION COMPOSITIONTHICKNESS COILS
4 mm. Dry Air bubbles + Plastic + Aluminum
1,2 x 50 m.
4 mm. Dry Air bubbles + Plastic + Aluminum
1,2 x 50 m.
8 mm. Dry Air bubbles + Plastic + Aluminum + Air dry Foam
1,2 x 25 m.
9 mm. Aluminum + DoubleDry air bubbles dry air + Foam + Aluminum
1,2 x 25 m.
18 mm. 2 leaves + 2 aluminum sheets bubbles +2 Wadding reflective sheet
1,53 x 15 m.
Termic S
Termic 10
Termic SYC
Termic DBFO40
Multi Termic
Techmo Lam Impact Plus Anti-Impact Films
8 mm.
Special Complex, made with high quality polyethylene by direct extrusion process and physical expansion.
ROLTHICKNESS
1,5 x 45 m
Techmo Lam Impact NOVO Anti-Impact Films
Techmo Lam Impact NOVO 5 mm.Techmo Lam Impact NOVO 10 mm.
DENOMINATION
Pololefina elastomeric foam. Sound insulation impact.
ROLTHICKNESS
5 mm.10 mm.
1,5 x 70 m.1,5 x 42 m.
Techmo Lam Impact Parquet Anti-Impact FilmsComplexes laminated parquet and laminated flooring.
ROLTHICKNESS
2,5 mm. 1,5 x 100 m.
Techmo Lam Impact Foam + Aluminio 1cara Anti-Impact FilmsComplex made with honeycomb polyethylene foam, closed-cell uncrosslinked, and metallized polyester film.
ROLTHICKNESS
5 mm. 1,5 x 50 m.
Techmo Lam Impact Silent Plus Anti-Impact Films
8 mm.
Polyethylene high reticular expanded insulating power.
ROLGROSOR
1,5 x 45 m
Insulating SheetsAnti-Impact Films
Blades DrainageSealing Bands
37
38
Sealing BandsTechmo Bituband 5000HD Sealing Bands
THICKNESS
Membrane adhesive, self-protected with a polyethylene film of cross-laminated high density.
ROL
1,5 mm. 1,00 x 20 m.0,30 x 20 m.0,20 x 20 m.0,15 x 20 m.
Techmo Butilband Geotex 300 Sealing Bands
THICKNESS
Self-adhesive tape protected with aluminum or copper foil.
ROL
Consult 0,30 x 10 m.
Techmo Bituband 5000HD ALU Sealing Bands
THICKNESS
Self-adhesive tape protected with aluminum or copper foil.
ROL
Consult 1,00 x 10 m.0,30 x 10 m.0,20 x 10 m.0,15 x 10 m.
Techmo Lam Dren Geotextil Blades Drainage
Prints nodular HDPE for waterproofing of walls and foundations. Color black.
ROLMATERIAL
Polyethylene + Geotextile Thermal bonding
2 x 20 m.
Techmo Boton Lam Dren Max Blades Drainage
PRESENTATION
Boxes of 200 points and 200 buttons
Buttons and tips for gripping sheet Lam Techmo Dren.
Films
Polypropylene geotextilesTechmo Geotex PP Polypropylene geotextiles
TYPE ROLS
Series nonwoven polypropylene geotextiles, short fiber, linked mechanically or thermally.
WEIGHT
2,20 x 125 m.120 g/m2PP 120
2,20 x 125 m.125 g/m2PP 125
2,20 x 125 m.150 g/m2PP 150
2,20 x 100 m.200 g/m2PP 200
2,20 x 75 m.300 g/m2PP 300
2,20 x 60 m.500 g/m2PP 500
2 x 25 m.1000 g/m2PP 1000
GeotextilesPolyester Geotextiles
Polypropylene geotextiles
Polyester GeotextilesTechmo Geotex PES Polyester Geotextiles
TYPE ROLS
Felts geotextiles consisting of polyester staple fiber nonwoven bonded by clamping.
WEIGHT
2,20 x 125 m.120 g/m2PES 120
2,20 x 125 m.150 g/m2PES 150
2 X 90 m.2,20 x 75 m.
300 g/m2PES 300
2,20 x 100 m.200 g/m2PES 200
2,20 x 60 m.500 g/m2PES 500
2 X 25 m.1000 g/m2PES 1000
Blades DrainageTechmo Lam Dren Max Blades Drainage
Prints nodular HDPE for waterproofing of walls and foundations. Color black.
ROLMATERIAL
Polyethylene 2 x 25 m.
Techmo Butilband Geotex 150 Sealing BandsSelf-adhesive tape protected with aluminum or copper foil.
ROL
0,15 x 10 m.
THICKNESS
Consult
Insulating SheetsAnti-Impact Films
Blades DrainageSealing Bands
Mesh Mesh
Techmotex Fill 77 Malla Pintura Mesh
White
COLOR
Mesh for reinforcement, and waterproofing paint.
PRESENTATIONMATERIAL
Fiberglass ROLs de 1 x 50 m.
Techmotex 99 Revoco Mortero Mesh
Blue
COLOR
Mesh for reinforcing plaster mortar line for encounters between different materials.
PRESENTATIONMATERIAL
Fiberglass ROLs de 1 x 50 m.
Mesh
Techmotex 44 Malla Yeso Mesh
White
COLOR
Mesh reinforcement for plaster and gypsum plasters.
PRESENTATIONMATERIAL
Fiberglass ROLs de 1 x 50 m.
Techmotex Velofill 99 Mesh
White
Velo fiberglass.
COLOR PRESENTATIONMATERIAL
Fiberglass ROLs de 1 x 50 m.
39
Techmotex Malla Balizamiento Mesh
Orange
COLOR
Mesh safety signs.
PRESENTATIONMATERIAL
Polyethylene ROLs de 1 x 50 m.
Techmotex Malla Ocultación 100% MeshMesh concealment.
Black
COLOR PRESENTATIONMATERIAL
Polyethylene ROLs de 1 x 50 m.
Techmotex Malla Ocultación 70% MeshHiding mesh.
Black
COLOR PRESENTATIONMATERIAL
Polietileno ROLs de 1 x 50 m.
Structural Reinforcement Systems StrapsBooster Blades
Carbon FibersBooster Blades
40
Techmo Carbolam L-50/1,2 Carbon Fibers. Booster Blades
Gray
COLOR
Structural reinforcement system consisting of unidirectional sheets high mechanical ability.
PRESENTATION
100 m.
Techmo Carbolam L-60/1,2 Carbon Fibers. Booster Blades
Gray
COLOR
Structural reinforcement system consisting of unidirectional sheets high mechanical ability.
PRESENTATION
100 m.
Techmo Carbolam L-100/1,2 Carbon Fibers. Booster Blades
Gray
COLOR
Structural reinforcement system consisting of unidirectional sheets high mechanical ability.
PRESENTATION
100 m.
Techmo Carbolam L-120/1,2 Carbon Fibers. Booster Blades
Gray
COLOR
Structural reinforcement system consisting of unidirectional sheets high mechanical ability.
PRESENTATION
100 m.
Techmo Carbolam L-50/1,4 Carbon Fibers. Booster Blades
Gray
COLOR
Structural reinforcement system consisting of unidirectional sheets high mechanical ability.
PRESENTATION
100 m.
Techmo Carbolam L-60/1,4 Carbon Fibers. Booster Blades
Gray
COLOR
Structural reinforcement system consisting of unidirectional sheets high mechanical ability.
PRESENTATION
100 m.
Techmo Carbolam L-100/1,4 Carbon Fibers. Booster Blades
Gray
COLOR
Structural reinforcement system consisting of unidirectional sheets high mechanical ability.
PRESENTATION
100 m.
Techmo Carbolam L-120/1,4 Carbon Fibers. Booster Blades
Gray
COLOR
Structural reinforcement system consisting of unidirectional sheets high mechanical ability.
PRESENTATION
100 m.
Techmodur Carbolam R-20 Carbon Fibers. Booster Blades
Consult
COLOR
Epoxy structural adhesive for CARBOBAND Techmo B-30/225 system.
PRESENTATION
Lot A+B de 5 kg.
Techmo Carbolam Imprimación Carbon Fibers. Booster Blades
Consult
COLOR
Two component epoxy resin for bonding reinforcement sitema Techmo Carbolam L.
PRESENTATION
Lot A+B de 5 kg.
Techmo Carboband R-30 Carbon Fibers. Straps
Consult
COLOR
Two component epoxy resin for bonding reinforcement sitema Techmo Carboband B-30/225.
PRESENTATION
Lot A+B de 5 kg.
Techmo Carboband Imprimación Carbon Fibers. Straps
Consult
COLOR
Two component epoxy resin for bonding reinforcement sitema Techmo Carbolam L.
PRESENTATION
Lot A+B de 5 kg.DIMENSIONS
DIMENSIONS
DIMENSIONS
DIMENSIONS
DIMENSIONS
DIMENSIONS
DIMENSIONS
50/1,2 mm.
60/1,2 mm.
100/1,2 mm.
120/1,2 mm.
50/1,4 mm.
60/1,4 mm.
100/1,4 mm.
DIMENSIONS
120/1,4 mm.
Carbon FibersStrapsTechmo Carboband B-30/225 Carbon Fibers. Straps
Gray
COLOR
Structural reinforcement system tissue formed by unidirectional carbon fiber.
PRESENTATION
150 m.
DIMENSIONS
30/225 mm.
Bituminous Emulsions
Techmo Asfalt-A2 Bituminous Emulsions
Black
COLOR
Waterproofing bitumen emulsion and easy handling pasty at room temperature.
PRESENTATIONCONSUMPTION
0.250 – 0.500 kg/m2 two layer
Cans of 5 kg.Cans of 25 kg.Cans of 35 kg.
Techmo Asfalt-AS Bituminous Emulsions
Black
COLOR
Waterproofing bitumen emulsion semiliquid consistency and high workability at room temperature.
PRESENTATIONCONSUMPTION
0.500 – 0.750 kg/m2 two layer
Cans of 5 kg.Cans of 22 kg.Cans of 25 kg.
CoatingsProtection and Waterproofing
41
Techmo Asfalt-Caucho Bituminous Emulsions
Black
COLOR
Rubber asphalt emulsion waterproofing. Due to their properties gives a great result in the waterproofing of all types of roofs, walls and walls. Also used as a steam barrier adhesive and as thermal insulation boards, such as extruded polystyrene.
PRESENTATIONCONSUMPTION
0,300 kg./m2 Cans of 25 kg.
Waterproofing Paints MonocomponentTechmo Imper 420 Waterproofing Paints. Monocomponent
GrayWhiteRedGreen
COLOR
Acrylic paint occasionally trafficable waterproofing.
PRESENTATIONCONSUMPTION
Consult Cans of 25 kg.
Techmo Imper 430R Waterproofing Paints. Monocomponent
GrayWhiteRedGreenTile Transparent
COLOR
Treatment, maintenance and restoration of waterproofing.
PRESENTATIONCONSUMPTION
Approx.1.5 – 2.0 kg/m2
Cans of 5 kg.Cans of 20 kg.
Techmo Imper 500 PoliuretanoWaterproofing Paints. Monocomponent
GrayWhiteRedTile
COLOR
Impermeabilizing component polyurethane based, weather resistant and highly elastic. When polymerized form one continuous elastomeric membrane. Passable.
PRESENTATIONCONSUMPTION
Approx. 1.500 kg/m2
Two layer
Cans of 10 kg.
Techmo Imper 501 POL Aqua Waterproofing Paints. Monocomponent
GrayRedOxideOthers
COLOR
Liquid polyurethane membrane for waterproofing. Certified for potable water contact.
PRESENTATIONCONSUMPTION
1.5 kg/m2 a 2kg/m2 (1.4 mm – 1 .9 mm of
thickness) two layers
Cans of 5 kg.Cans of 10 kg.Cans of 25 kg.
Techmo Imper 502 Waterproofing Paints. Monocomponent
Transparent
COLOR
Elastic aliphatic polyurethane resin, solvent-based monocomponent, moisture curable.
PRESENTATIONCONSUMPTION
1,50 - 2 kg/m2 Cans of 4 kg.Cans of 9 kg.Cans of 20 kg.
Techmo Asfalt F Bituminous Emulsions
Black
COLOR
Fiber asphalt emulsion for waterproofing bridge decks.
PRESENTATIONCONSUMPTION
0,300 kg./m2 Cans of 25 kg.
Techmo Imper 500 Alifático PoliuretanoWaterproofing Paints. Monocomponent
White
COLOR
Polyurethane based waterproofing component, weatherproof, UV-and high elasticity. When polymerized form one continuous elastomeric membrane. Passable.
PRESENTATIONCONSUMPTION
Approx. 1.500 kg/m2
Two layer
Cans of 25 kg.
Waterproofing Paints. MonocomponentBituminous Emulsions
Waterproofing Paints. BicomponentHydrophobic Impregnations
CoatingsProtection and Waterproofing
Techmo Imper 503 POL Waterproofing Paints. Monocomponent
Transp.
COLOR
Polyurethane membrane for waterproofing liquid and transparent.
PRESENTATIONCONSUMPTION
(60%) is 1.5 to 2 kg/m2(0.9 to 1.2 mm thick)applied at 2/3 layers
Cans of 4 kg.Cans of 9 kg.Cans of 20 kg.
42
Waterproofing Paints BicomponentTechmo Imper 510 Waterproofing Paints. Bicomponent
Black
COLOR
Two-component polyurethane waterproofing cold applied solvent free, suitable for potable water.
PRESENTATIONCONSUMPTION
Consult Lot 5 kg.Lot 25 kg.
Techmo Imper 512 B Waterproofing Paints. Bicomponent
Black
COLOR
Polyurethane Waterproofing with bitumen, cold applied bicomponent.
PRESENTATIONCONSUMPTION
Consult Lot 40 kg.
Techmo Imper 515 Waterproofing Paints. Bicomponent
GrayTileBeige
COLOR
Waterproofing bicomponent curing hot melt faster without solvents, applied hot spraying machine.
PRESENTATIONCONSUMPTION
Consult Lot of 400 kg.
Techmo Imper 516 Poliurea Waterproofing Paints Bicomponent.
GrayRedWhite
COLOR
Waterproofing polyurea base, application-component fast curing hot solvent, applied hot spraying machine. Suitable for drinking water.
PRESENTATIONCONSUMPTION
2,7kg/m2 Lot of A+B 400 kg.
Techmo Imper 517 Poliurea HíbridaWaterproofing Paints. Bicomponent
GrayTileBeige
COLOR
Hybrid polyurea waterproofing base, hot melt bicomponent, slightly slower curing, solvent, applied hot spraying machine.
PRESENTATIONCONSUMPTION
Consult Lot of 400 kg.
Waterproofing Paints. MonocomponentBituminous Emulsions
Waterproofing Paints. BicomponentHydrophobic Impregnations
CoatingsProtection and Waterproofing
Techmo Hidrosil 304 F Hydrophobic Impregnations
Colourless Liquid
APPEARENCE
Impregnating solvent based waterproofing facade with fungicidal.
PRESENTATIONCONSUMPTION
Aprox. 200 - 500 g/m2 Bottle of 25 l.
Hydrophobic ImpregnationsTechmo Hidrosil AQUA Hydrophobic Impregnations
Colourless Liquid
APPEARENCE
Waterproof colorless water repellent and dirt.
PRESENTATIONCONSUMPTION
Aprox. 200 - 500 g/m2 Bottle of 5 l.Bottle of 20 l.Bottle of 25 l.
Techmo Hidrosil Oilstop Hydrophobic Impregnations
White Liquid
APPEARENCE
Colourless water repellent impregnation and oils for unglazed tiles.
PRESENTATIONCONSUMPTION
Aprox. 100 - 200g/m2 Bottle of 5 l.
Techmo Hidrosil 304 Hydrophobic Impregnations
Colourless Liquid
APPEARENCE
Product transparent silicon based, breathable, waterproof and waterproof.
PRESENTATIONCONSUMPTION
Aprox. 200 - 250 g/m2 Bottle of 5 l.Bottle of 16 l.Bottle of 25 l.
Techmo Hidrosil Gres Hydrophobic Impregnations
Liquid
APPEARENCE
Colourless waterproofing impregnation for unglazed tiles, porous ceramic tiles, exposed brick, natural stone, etc.
PRESENTATIONCONSUMPTION
100 - 200 gr/m2 Bottle of 5 l.
Techmo Limp Graffitti Hydrophobic Impregnations
Liquid
APPEARENCE PRESENTATION
Bottle of 5 l.
Limpador de graffittis universal para superfícies absorventes, não absorventes e superfícies delicadas.
CONSUMPTION
According use
Techmo Anti Graffitti Hydrophobic Impregnations
Liquid
APPEARENCE PRESENTATION
Bottle of 30 kg.
Producto líquido, sem dissolvente, formulado sobre base de copolímeroscom efeito anti - grafitti.
CONSUMPTION
According use
Techmo Mineralizador Hydrophobic Impregnations
Liquid
APPEARENCE PRESENTATION
Bottle of 35 l.
Mineralizer, moisture sealant, leaks and waterways.
CONSUMPTION
According use
43
Waterproofing Paints. MonocomponentBituminous Emulsions
Waterproofing Paints. BicomponentHydrophobic Impregnations
Pavement SystemAsphalt And Acrylic
44
Asphalt PavementsTechmo Asfalto en Frío Asphalt Pavements
Black
COLOR PRESENTATION
Cans of 25 kg.
Asphalt repair base and road repairs.
CONSUMPTION
Approx. Kg/m2 and 21 cm thickness
Techmo Slurry Asfáltico Asphalt Pavements
Black
COLOR PRESENTATION
Cans of 43 kg.Cans of 45 kg.Cans of 50 kg.
Asphalt pavements to perform, roads, trails.
CONSUMPTION
Approx. 1.5 – 2.5 kg/cm2 and cm of
thickness
Acrylic FlooringTechmo Slurry Acrílico Acrylic Flooring
GreenRedGrayOther
COLOR PRESENTATION
Reinforced cartons of 50 kg.
Acrylic mortar slurry consistency, made of synthetic resin emulsion, graded aggregate and selected pigments.
CONSUMPTION
Approx. 1.5 – 2.5 Kg/m2
* Ver Techmocolor Sellador Acrílico como imprimación al sistema de slurrys acrílicos.
* Ver Techmocolor Slurry T como terminación e igualación del color para sistema de slurrys acrílicos.
Pavement SystemEpoxy
Epoxy FlooringTechmoepox Autonivelante Epoxy Flooring
RAL Colours
COLOR PRESENTATION
Lot A + B 25 kg.
Coating based self-leveling epoxy-quartz. Gives concrete pavements decorative finish to 3 mm thick.
CONSUMPTION
2 kg of final product /1m2/1m
Techmoepox Suelos Epoxy Flooring
RAL Colours
COLOR PRESENTATION
Lot A + B 25 kg.
Colored coating epoxy resin based solvent.
CONSUMPTION
0.2 – 0.3 kg per layer
Techmoepox W Epoxy Flooring
RAL Colours
COLOR PRESENTATION
Lot A + B 25 kg.
Water based epoxy coating for high performance.
CONSUMPTION
200 – 300 g/m2 per 2 or 3 layers
Techmoepox Autonivelante W Epoxy Flooring
RAL Colours
COLOR PRESENTATION
Lot A + B 25 kg.
Epoxy binder for water-based bicomponent preparing self-leveling mortars.
CONSUMPTION
2.7 kg/m2/mm.
Asphalt PavementsAcrylic Flooring
Epoxy FlooringPrimers
45
Techmoepox Multicapa Epoxy Flooring
RAL Colours
COLOR PRESENTATION
Lot A+B 25 kg.
Coating epoxy two component, high solids, suitable for protection of concrete surfaces.
CONSUMPTION
3 kg/m2/mm
Techmoepox Multicapa W Epoxy Flooring
Consult
COLOR PRESENTATION
Lot A+B 25 kg.
Bicomponent epoxy coating, high solids content, suitable for protection of concrete surfaces.
CONSUMPTION
0,7 - 1,0 kg/m2
Techmoepox Multicapa AL Epoxy Flooring
Consult
COLOR PRESENTATION
Lot A+B 25 kg.Lot A+B 40 kg.
Bicomponent epoxy coating, high solids content, suitable for protection of concrete surfaces. With food certificate.
CONSUMPTION
0,6-0,8 kg/m2
PrimersTechmoepox Imprimación Primers
Whitish
COLOR PRESENTATION
Lot A+B de 20 kg.
Epoxy primer polymeric bicomponent continuous pavements.
CONSUMPTION
200 - 300 g/m2
Techmoepox Imprimación Cerámica Primers
Whitish
COLOR PRESENTATION
Lot A+B de 20 kg.
Epoxy primer continuous bicomponent polymeric flooring on damp substrates.
CONSUMPTION
150 - 250 g/m2
Techmoepox Imprimación Humedad Primers
Amber
COLOR PRESENTATION
Lot A+B de 7 kg.
Two component epoxy primer for continuous polymeric flooring on damp substrates.
CONSUMPTION
250 - 350 g/m2
Techmoepox W Imprimación Primers
Amber
COLOR PRESENTATION
Lot A+B de 20 kg.Lot A+B de 25 kg.
Primer bicomponent epoxy resin based on aqueous dispersion.
CONSUMPTION
200 - 300 g/m2
Techmoepox W 1670 Primers
MilkyWhite liquid
COLOR PRESENTATION
Lot A+B de 25 kg.
Epoxy primer water for hardening and consolidation of concrete surfaces.
CONSUMPTION
200 - 0,300 g/m2
Pavement SystemEpoxy Epoxy Flooring
Primers
46
Pavement SystemPolyurethane
Polyurethane PaviementsTechmopol Protec 40 2C Polyurethane Paints
TransparentRAL Colours
COLOR PRESENTATION
Lot A+B 30 kg.
Component aliphatic polyurethane resin finishing and protection of interior and exterior flooring.
CONSUMPTION
4 – 7 m2/kgper layer
Techmopol Protec 60 Polyurethane Paints
TransparentRAL Colours
COLOR PRESENTATION
Package 4 kg.Package 9 kg.Package 20 kg
Resin-component aliphatic polyurethane finish and protection for indoor and outdoor flooring.
CONSUMPTION
4 – 7 m2/kgper layer
Techmopol Protec W Brillante Polyurethane Paints
Bright TransparentRAL Colours
COLOR PRESENTATION
Lot A+B de 4 kg.Lot A+B de 9 kg.
Lot A+B de 20 kg.
Aliphatic polyurethane resin without solvents, finishing and protection of exterior and interior flooring.
CONSUMPTION
300 gr/m2per layer
Techmopol Protec W Mate Polyurethane Paints
Bright TransparentRAL Colours
COLOR PRESENTATION
Lot A+B de 4 kg.Lot A+B de 9 kg.
Lot A+B de 20 kg.
Esina aliphatic polyurethane solvent free, finishing and protection of exterior and interior flooring.
CONSUMPTION
300 gr/m2per layer
Techmopol Suelos Polyurethane Paints
TransparentRAL Colours
COLOR PRESENTATION
Package 4 kg.Package 9 kg.Package 20 kg
Single component polyurethane resin for floor finish and interior protection.
CONSUMPTION
150 - 200 gr/m2
Techmopol Protec Piscinas Polyurethane Paints
Transparent
COLOR PRESENTATION
Package 4 kg.Package 9 kg.Package 20 kg
Single component aliphatic polyurethane resin UV stabilized salt water resistant and chlorine.
CONSUMPTION
150 - 200 gr//m2
Techmopol Autonivelante Polyurethane Paints
Red oxideRAL Colours
COLOR PRESENTATION
Lot A+B de 25 kg.
Mortar bicomponent polyurethane leveling 100% solids.
CONSUMPTION
1,3 kg/m2/mm.
Techmopol Autonivelante Flex Polyurethane Paints
Red oxideRAL Colours
COLOR PRESENTATION
Lot A+B de 25 kg.
Flexible mortar leveling, 100% solids.
CONSUMPTION
1,3 kg/m2/mm.
Binders And AdhesivesTechmopol Ligante de Áridos Binders And Adhesives
Transparent
COLOR PRESENTATION
Lot A+B de 25 kg.
Decorative Floor mineral filter.
CONSUMPTION
8 - 12%
Techmopol Ligante de Áridos ESP Binders And Adhesives
Transparent
COLOR PRESENTATION
Lot A+B de 20 kg.
Decorative Pavement filter aliphatic mineral.
CONSUMPTION
8 - 12%
PrimersAdditives
Binders And AdhesivesPolyurethane Paviements
Techmopol Adhepur 100 Binders And Adhesives
Beige
COLOR PRESENTATION
Package 5 kg.
Adhesive elastic polyurethane 100%
CONSUMPTION
0,5 - 1,4 kg/m2
PrimersTechmopol Imprimación Poliuretano Primers
Transparent
COLOR PRESENTATION
Package 4 kg.Package 9 kg.
Package 20 kg.
Primer for polyurethane floors.
CONSUMPTION
150 - 200 g/m2
Techmopol Imprimación Epox Humedad Primers
Transparent
COLOR PRESENTATION
Package 20 kg.
Primer for the application of polyurethane flooring or wet on wet substrates.
CONSUMPTION
300 gr/m2
Techmopol Imprimación Tapa Poros Primers
Transparent
COLOR PRESENTATION
Package 20 kg.
Aromatic polyurethane resin, moisture curable.
CONSUMPTION
150 - 200 gr/m2
Techmopol Imprimación Epox 100 Primers
Transparent
COLOR PRESENTATION
Package 10 kg.Package 20 kg.
Primer Epoxy flooring.
CONSUMPTION
300 gr/m2
AdditivesTechmopol Aditivo Acelerante Additives
Transparent
COLOR PRESENTATION
Package of 5 kg. y 25 kg.
Accelerator for polyurethane.
CONSUMPTION
1/20 to resinTechmo IMPER
500
Techmopol Aditivo Anti-Slip Additives
Transparent
COLOR PRESENTATION
Package 1 kg.
Additive slip polyurethane flooring.
CONSUMPTION
Combined with 20 kg of
polyurethane resin
Techmopol Aditivo Mateante Additives
Whitish
COLOR PRESENTATION
Package 4 kg.
Additive polyurethane matting for flooring.
CONSUMPTION
Combined with 20 kg of
polyurethane resin
Techmopol Aditivo Acelerante Super Additives
Transparent
COLOR PRESENTATION
Package of5 kg. y 25 kg.
Super accelerator for polyurethane.
CONSUMPTION
1/20 to resinTechmo IMPER
500
Techmopol Ligante Caucho Binders And Adhesives
Transparent
COLOR PRESENTATION
Package 5 kg.Package 10 kg.Package 25kg.
Aromatic polyurethane resin moisture curable.
CONSUMPTION
8 - 12%
Pavement SystemPolyurethane Primers
Additives
Binders And AdhesivesPolyurethane Paviements
47
Techmopol Cera Brillante Additives
Transparent
COLOR PRESENTATION
Cans of 10 kg.
Wax to protect glossy resin flooring.
CONSUMPTION
Consult
Techmopol Cera Mate Additives
Transparent
COLOR PRESENTATION
Cans of 10 kg.
Wax matting finish for protection resin pavements.
CONSUMPTION
150 gr/m2
Techmopol Pasta Color W Additives
Consult
COLOR PRESENTATION
Cans of 4 kg.
Pasta water based color.
CONSUMPTION
Consult
Techmopol Pasta Color Disolvente Additives
Consult
COLOR PRESENTATION
Cans of 4 kg.
Pasta coloring Techmopol Techmo Imper 500 and Protec. Base solvents.
CONSUMPTION
Consult
Techmopol Aditivo Tixotropante Additives
Transparent
COLOR PRESENTATION
Package 1 kg.
Additive tixotropante based polyurethane.
CONSUMPTION
Combined with 25 kg of
Techmo imper 500
polyurethane
Techmopol Aditivo Espesante Additives
Consult
COLOR PRESENTATION
Cans of 1 kg.
Additive powder thickener.
CONSUMPTION
Combined with 20 kg of
polyurethane resin
Pavement SystemPolyurethane Primers
Additives
Binders And AdhesivesPolyurethane Paviements
48
Paintings
Plastic PaintsTechmocolor Pintura Interior Lavable Plastic Paints
WhiteConsult
COLOR PRESENTATION
Cans of 0,75 l.Cans of 4 l.Cans of 15 l.
Plastic paint for walls and ceilings.
CONSUMPTION
8 - 12 m2/l.
Techmocolor Pintura Interior Especial Plastic Paints
WhiteConsult
COLOR PRESENTATION
Cans of 4 l.Cans of 15 l.
Acrylic paint for interior and exterior.
CONSUMPTION
8 - 12 m2/l.
Techmocolor Pintura Especial Fachadas Plastic Paints
WhiteConsult
COLOR PRESENTATION
Cans of 0,75 l.Cans of 4 l.Cans of 15 l.
Plastic paint for interior and exterior with aggressive environment.
CONSUMPTION
8 - 12 m2/l.
Techmocolor Pintura Fachadas Extra Plastic Paints
WhiteConsult
COLOR PRESENTATION
Cans of 0,75 l.Cans of 4 l.Cans of 15 l.
Plastic paint for interior and exterior with aggressive environment.
CONSUMPTION
8 - 12 m2/l.
Paintings StoneTechmocolor Revestimiento Petreo Liso Paintings Stone
WhiteConsult
COLOR PRESENTATION
Cans of 15 l.
Plastic paint for walls and ceilings.
CONSUMPTION
1 - 3 m2/l.
Techmocolor Revestimiento Petreo Rugoso Paintings Stone
WhiteConsult
COLOR PRESENTATION
Cans of 15 l.
Plastic paint for walls and ceilings.
CONSUMPTION
1 - 3 m2/l.
Sports PaintingsTechmocolor Sport Tennis Sports Paintings
WhiteRedGreen
COLOR PRESENTATION
Cans of 18 kg.
Acrylic paint special sports flooring.
CONSUMPTION
8 - 10 m2/l.
Techmocolor Slurry T Sports Paintings
GrayRedGreenTile
COLOR PRESENTATION
Cans of 15 l.
Painting synthetic resin dispersion for completion and color matching systems Techmo Acrylic Slurry.
CONSUMPTION
8 - 10 m2/l.
Additional PaintingsSilicate Paints
Sports Paintings
Paintings For PoolsPaintings Stone
Plastic Paints
49
Paintings For PoolsTechmocolor Sport Piscinas Paintings For Pools
WhiteBlue
COLOR PRESENTATION
Cans of 15 l.
Acrylic paint for pools.
CONSUMPTION
According use
Techmocolor Sport Piscinas Poliéster Paintings For Pools
Blue
COLOR PRESENTATION
Cans of 4 l.
Polyurethane paint for painting polyester pools.
CONSUMPTION
According use
Silicate Paints
Techmopint Imprimación Silicato Silicate Paints
Colourless
COLOR PRESENTATION
Cans of 4 l.
Fixer potassium silicate based mineral preparing porous supports.
CONSUMPTION
10 – 15 m2/l per layer
Techmopint Silicato Silicate Paints
Consult
COLOR PRESENTATION
Cans of 12 l.
Painting based mineral potassium silicate and inorganic pigments in aqueous solution.
CONSUMPTION
6 – 8 m2/l per layer
Additional PaintingsTechmocolor Trafic Señalización Vial Additional Paintings
WhiteYellow
COLOR PRESENTATION
Cans of 4 l.Cans of 4 l.
Cans of 30 l.
Painting signaling acrylic resins in the solvent of a component.
CONSUMPTION
Consult
Techmocolor Aditivo Antimoho Additional Paintings
Consult
COLOR PRESENTATION
Botes de 0,60 gr.
Additive anti-mold for acrylic paints.
CONSUMPTION
0,60gr/1 l.
Techmocolor Sellador Acrílico Additional Paintings
Transparent
COLOR PRESENTATION
Cans of 4 l.Cans of 15 l.
Coating 100% acrylic, water-based sealing and protection of a variety of porous surfaces. Leave a glossy natural finish to increase the brightness with the number of layers.
CONSUMPTION
Approx. 4 – 6 m2/kg
Techmocolor Sellador Acrílico Especial Additional Paintings
Transparent
COLOR PRESENTATION
Cans of 15 l.
100% acrylic coating to seal and protect a wide variety of porous surfaces. Leave a glossy natural finish to increase the brightness with the number of layers.
CONSUMPTION
Approx. 4 – 6 m2/kg
Paintings Additional PaintingsSilicate Paints
Sports Paintings
Paintings For PoolsPaintings Stone
Plastic Paints
50
Solvents And Strippers
SolventsTechmopol Disolvente SA 100 Solvents
Transparent
COLOR PRESENTATION
Package 5 kgPackage 10 kg.Package 25kg.
Solvent Additive special epoxies and polyurethanes.
CONSUMPTION
8 - 10%
Techmopol Disolvente SA 100 Retard Solvents
Transparent
COLOR PRESENTATION
Package 4 kgPackage 9 kg.
Package 20 kg.
Special solvent retardant for epoxies and polyurethanes.
CONSUMPTION
Consult
StrippersTechmo Decapante Strippers
Transparent
COLOR PRESENTATION
Package 4 kgPackage 25kg.
Stripper for all paints.
CONSUMPTION
8 - 10%
Techmopol Disolvente Universal Solvents
Transparent
COLOR PRESENTATION
Package 10 kg.Package 20 kg.
Solvent cleaning tools.
CONSUMPTION
Consult
Slab FilterTechmo Losa Filtrante Slab Filter
Techmo Losa Filtrante R
Stripper System filter flagstones. With insulation.
DENOMINATION THICKNESS INSULATIONTYPES
65 mm.75 mm.85 mm.95 mm.
30 mm.40 mm.50 mm.60 mm.
Special Floors
StrippersSolvents
Slab Filter
51
Separators And Spacers
Armor For Horizontal Separation
Armor For Vertical SeparationUNI Rueda Armor For Vertical Separation
UNI Rueda 15/4 - 10
UNI Rueda 20/4 - 12
UNI Rueda 25/4 - 12
UNI Rueda 30/4 - 12
UNI Rueda 30/6 - 20
UNI Rueda 35/4 - 12
UNI Rueda 35/6 - 14
UNI Rueda 40/5 - 14
UNI Rueda 40/6 - 20
UNI Rueda 50/6 - 14
UNI Rueda 50/6 - 20
TYPE
Spacers shaped plastic circular spacer specially designed as reinforcements in walls, columns, walls and other concrete structures. Has a grip portion of corrugated steel bars of different diameters.
COATINGO STICK
4 - 10 mm.
4 - 12 mm.
4 - 12 mm.
4 - 12 mm.
6 - 20 mm.
4 - 12 mm.
6 - 14 mm.
5 - 14 mm.
6 - 20 mm.
6 - 14 mm.
6 - 20 mm.
15 mm.
20 mm.
25 mm.
30 mm.
30 mm.
35 mm.
35 mm.
40 mm.
40 mm.
50 mm.
50 mm.
UNITS
1.000
500
500
250
125
200
125
125
125
100
50
BK KNOCHEN sin alambre Based Concrete Strippers
BK KNOCHEN 20-25-30
BK KNOCHEN 35-40-50
BK KNOCHEN 45-50-60
TYPE
Spacer for universal use, based on fiber reinforced concrete, three-position, without wires, for fixing corrugated steel bars max diameter 24 mm for concrete coatings from 20 to 50 mm according to the position and type.
COATINGO STICK
To 20 mm.
To 24 mm.
To 28 mm.
20/25/30 mm.
35/40/50 mm.
45/50/60 mm.
UNITS
1.000
250
250
Based Concrete Strippers
BK KNOCHEN con alambre Based Concrete Strippers
BK KNOCHEN 20-25-30 al
BK KNOCHEN 35-40-50 al
TYPE
Spacer for universal use, based on fiber reinforced concrete, three-position wire for fixing corrugated steel bars Max. 24 mm. For concrete coatings 20 to 50 mm. by position and type.
COATINGO STICK
To 20 mm.
To 24 mm.
20/25/30 mm.
35/40/50 mm.
UNITS
500
250
52
ASK TORRE Armor For Horizontal Separation
ASK Torre 15
ASK Torre 20
ASK Torre 25
ASK Torre 30
ASK Torre 40
ASK Torre 50
TYPE
Plastic separator with four locking clamps of different diameter rebar. Appropriate rod crosses meetings horizontal / vertical.
COATINGO STICK
4 - 16 mm.
6 - 14 mm.
4 - 16 mm.
6 - 14 mm.
4 - 16 mm
6 - 14 mm
8 - 18 mm.
6 - 16 mm.
6 - 16 mm.
6 - 16 mm.
15 mm.
15 mm.
20 mm.
20 mm
25 mm.
25 mm.
30 mm.
30 mm.
40 mm.
50 mm.
UNIT
1.000
1.000
500
500
500
500
250
250
250
125
AL/2 Barra Armor For Horizontal Separation
AL/2 Barra 25
AL/2 Barra 30
TYPE
Prefabricated corrugated separator.
COATINGO STICK
2,0 mm.
2,0 mm.
25 mm.
30 mm.
UNITS
100
100
Zick-Zack Armor For Horizontal Separation
ZICK-ZACK 25
ZICK-ZACK 30
TYPE
Prefabricated corrugated separator.
COATINGO STICK
2,0 mm.
2,0 mm.
25 mm.
30 mm.
UNITS
100
100
Separador Vigueta Armor For Horizontal Separation
Vigueta 20 mm.
Vigueta 15 mm.
TYPE
Prefabricated corrugated separator.
COATINGO STICK
2,0 mm.
2,0 mm.
20 mm.
15 mm.
UNITS
Consult
Consult
Armor For Vertical SeparationArmor For Horizontal Separation
Based Concrete StrippersSpacers For Formwork And Accessories
Profile For Making ChamfersStrippers For Large Precast
Safety And Security
Separators And Spacers
ABS con alambre Based Concrete Strippers
ABS 25 al
ABS 30 al
ABS 40 al
ABS 50 al
TYPE
Spacer to concrete base, with wire rods for fixing corrugated steel Max. 28 mm.
COATINGO STICK
To 20 mm.
To 22 mm.
To 25 mm.
To 28 mm.
25 mm.
30 mm.
40 mm.
50 mm.
UNITS
1.000
500
500
250
ABS sin alambre Based Concrete Strippers
ABS 20
ABS 25
ABS 30
ABS 40
ABS 50
ABS 60
TYPE
Spacer made of concrete, without wire, for fixing corrugated steel bars of diameter 28 mm max.
COATINGO STICK
To 20 mm
To 20 mm.
To 22 mm.
To 25 mm.
To 28 mm
To 28 mm
20 mm.
25 mm.
30 mm.
40 mm.
50 mm.
60 mm.
UNITS
1.000
1.000
500
500
250
250
RSR 22/26
RSR 20/24
TYPE
Plastic tube grommets for formwork, knurled surface for perfect grip with the concrete mass. Order tube of 2 m long and 20 mm of diameter. (20/24) and 22 mm. (22/26).
LONGITUD
2,0 m.
2,0 m.
UNITS
100
50
RSR TUBO Spacers For Formwork And Accessories
RK ROSETA 22
TYPE
Terminal slotted plastic insert in RSR TUBE 22/26 grommets for formwork. Use RST sealed.
RSR TUBO
22/26
UNITS
250
SK ROSETA Spacers For Formwork And Accessories
RST TAPÓN ESTANCO 22
RST TAPÓN ESTANCO 30
TYPE
Plastic Terminal grommets for formwork, knurled surface for perfect grip with the concrete mass. Order tube of 2 m long and 20 mm of diameter (20/24) and 22 mm (22/26).
ROSETA
Para RK Roseta 22
Para RK Roseta 30
UNITS
500
500
RST TAPÓN ESTANCO Spacers For Formwork And Accessories
ST TAPÓN 20
ST TAPÓN 22
TYPE
Plastic plug insertable in RSR TUBE 20/24 and 22/26 grommets for formwork. After stripping and curing concrete, remove and insert SK CONE ST PLUG.
RSR TUBO
20/24
22/26
UNITS
1.000
1.000
ST TAPÓN Spacers For Formwork And Accessories
Spacers For Formwork And Accessories
SK CONO 20
SK CONO 22
TYPE
Cone plastic insertable TUBE RSR 20/24 and 22/26 grommets for formwork. Easily removable and reusable.
RSR TUBO
20/24
22/26
UNITS
500
500
SK CONO Spacers For Formwork And Accessories
53
Armor For Vertical SeparationArmor For Horizontal Separation
Based Concrete StrippersSpacers For Formwork And Accessories
Profile For Making ChamfersStrippers For Large Precast
Safety And Security
Separators And Spacers
Strippers For Large Precast
STAPELPLATT
TYPE
Plate with solid plastic hemispheres of high compressive strength, ideal for stacking, storing and transporting precast concrete. Avoid direct contact between precast. It is reusable.
MEASURES
150 X 60
UNITS
200
STAPELPLATT Strippers For Large Precast
Separador Tapón de Seguridad Safety And Security
Tapón de Seguridad 8-16
Tapón de Seguridad 16-32
Tapón de Seguridad 6-20
TYPE
Plastic plug insertable into steel bars and waiting, minimizing the risk of accidents by operators, cuts, etc. Presented as a risk area in orange for easy identification. It is reusable.
8 - 16 mm.
16- 32 mm.
6 - 20 mm.
UNITS
500
O STICK
Safety And Security
Cápsula Soporte Quitamiedo
TYPE
High-strength plastic capsule that serves as support for embedding security fences obras etc.
40 mm.
UNITS
Separador Soporte Quitamiedos Safety And Security
MEASURES HEIGHT
130 mm. 100
54
Armor For Vertical SeparationArmor For Horizontal Separation
Based Concrete StrippersSpacers For Formwork And Accessories
Profile For Making ChamfersStrippers For Large Precast
Safety And Security
Profile For Making Chamfers
Perfil 15
Perfil 20
Perfil 30
TYPE
plastic Linstón triangular section, for conducting structures ormigón chamfers. Is flexible, impact resistant and reusable.
MEASURES
15a/21,2b
20a/28,3b
30a/42,ab
UNITS
100
100
50
Berenjeno o Perfil Triangular Profile For Making Chamfers
LOG.
2,5 m.
2,5 m.
2,5 m.
55
Techmo Limp S Cleaning
Liquid
APPEARENCE PRESENTATION
Bottle of 25 l.
A spot cleaner inorganic, for removing dirt, remains of mortar, remove esflorecencias, debris and limescale, etc.
CONSUMPTION
Según uso
Techmo Limpoleo Cleaning
Liquid
APPEARENCE PRESENTATION
Bottle of 5 l.
Paste cleaner to remove oil stains, grease, wax, etc. in a thickness up to 2 cm deep in marble, terrazzo, concrete, mortar, wood, plaster, natural and artificial stone, etc.
CONSUMPTION
According use
Techmo Limp Multinox Quitagrasas Cleaning
Liquid
APPEARENCE PRESENTATION
Bottle of 5 l.Bottle of 25 l.
Cleaning fluid fats and oils for cars, trucks, engines, machinery.
CONSUMPTION
According use
HygieneTechmo Papel Secamanos Industrial Hygiene
White
COLOR PRESENTATION
Roll 450 m.
Paper 2 ply, 100% cellulose.
Techmo Limp Epox Cleaning
Liquid
APPEARENCE PRESENTATION
Bottle of 25 l.
Cleaner epoxy scrap metal on ceramic tiles.
CONSUMPTION
According use
Techmo Limp Desengrasante Cleaning
Liquid
APPEARENCE PRESENTATION
Bottle of 5 l.Bottle of 25 l.
Cleaning fluid fats and oils for cars, trucks, engines, machinery.
CONSUMPTION
According use
CleaningHygiene And Cleaning
Techmo Soporte Bobina de Pie (Trípode) HygieneSupport for placing paper rolls.
Techmo Soporte Bobina de Pared (Mural) HygieneSupport for placing paper rolls.
Techmo Jabón Crema Desengrasante para Manos Hygiene
White
COLOR PRESENTATION
Bote 10 kg.
Paper 2 ply, 100% cellulose.
Hygiene
CleaningTechmo Limp A Cleaning
Liquid
APPEARENCE PRESENTATION
Bottle of 25 l.
It's a cleaner inorganic nature spots, rust removal for cleaning mortar and concrete debris. Cleaning concrete vats and mixers, etc.
CONSUMPTION
Según uso
Techmo Limpiagres Cleaning
Liquid
APPEARENCE PRESENTATION
Bottle of 25 l.
Special cleaning product for ceramic tile adhesive remains, cement, grout, lime, salt, gypsum etc.
CONSUMPTION
According use
Techmo Limp Clean Cleaning
Towel Box of 80 Ut.
Hand cleaning towels.
APPEARENCE PRESENTATION
Techmo Sepiolita Cleaning
PRESENTATION
Bags of 20 kg.
An industrial absorbent natural, manufactured from sepiolite clay mineral.
CONSUMPTION
According use
VERSION 4.0
Gran Canaria c/ Las Mimosas, Fase 1, Nave 35A - 35B. Polígono Industrial de Arinaga. 35118 Agüimes - Gran Canaria. Tlf.: 928 189 355/56 - Fax: 928 188 041 - [email protected] c/ Benjamin Franklin, Nave 9. Polígono Industrial El Chorrillo. 38109 Santa Cruz de Tenerife - Tenerife. Tlf.: 922 537 672 - Fax: 922 625 807 - [email protected]
Fuerteventura c/ El Trillo, Parcela 14, Nave 34. Polígono Industrial El Matorral. 35610 El Matorral - Puerto del Rosario. Tlf.: 928 543 412 - Fax: 928 543 481 - [email protected]
Barcelona Avinguda Arrahona, 58 nave A-7. Polígono Industrial Can Salvatella. Barbera del Vallès - 08210 (Barcelona). Tlf.: 930 002 900 - Fax: 931 000 643 - [email protected] c/Mar del Tirreno, 13. Industrial San Fernando Norte. Polígono de San Fernando de Henares. 28830 Madrid. Tlf.: 918 270 123 - Fax: 911 018 152 - [email protected]
Total SolutionsFor Construction