1 Corporate presentation May 2013
Pallet Size Dolly
User manual
www.LeanProducts.eu Lean Manufacturing Solutions
2 Corporate presentation May 2013
Overview
• Product
• Model versions & add-ons
• Fields of application
• The Milkrun train
• Tow Bar function and connecting dollies
• Strap devices
• Manual handling & handle
• Forklift handling
• Maximum load and stacking
• Transport safety
• Safety equipment & defective products
• Instructions for Use and Cleaning the Lean products
• Contact details
www.LeanProducts.eu Lean Manufacturing Solutions
3 Corporate presentation May 2013
Product short description
• Dimensions: 1225 x 800 mm
• Dimensions: 1225 x 1000 mm
• Features
o 2 fixed and 2 swivelling wheels with brake
o Hideable towing bar
o Ergonomic handle
o Multipurpose deck
o Anti-slip surface
www.LeanProducts.eu Lean Manufacturing Solutions
5 Corporate presentation May 2013
Fields of application
• The lean pallet size dolly can be used widely in internal and
external logistics.
• The dollies are designed to be used as a multipurpose load
carrier.
– For example it can carry standard pallets, such as EURO size
(1225 x 800 mm model) and ISO size (1225 x 1000 mm model), also KLT’s (crates), metal cages or collapsible boxes,
which they have been designed for.
– In case of uncertainty, please contact the supplier.
• The dollies can be operated by hand as one unit or connected as
a milk-run train towed with a suitable tow-tractor or forklift.
www.LeanProducts.eu Lean Manufacturing Solutions
6 Corporate presentation May 2013
Important! Parameters such as the condition of the floors, aisle-width, length of milkrun route, etc have a significant
impact on the design of the milkrun train. Be also aware about maximum pulling capacity of the towing tractor.
Therefore, we strongly recommend that K. Hartwall is consulted and thorough tests are carried out in order to make sure
that the safety aspect is properly taken care off.
The Milkrun train
• Max. load per Dolly: 1000 kg
• Max. load to be pulled in the train: 3,400 kg Max. speed
of the ”train”: 6 km/h
• Max. length of the milkrun train: 3-4 Dollies
• Examples of length and max. load of the milkrun train:
o 3 Pallet Size Dollies loaded with 1000 kg each = 3000 kg
in the train evenly distributed load
o 3 Pallet Size Dollies loaded with 1000 kg each + 1
600x800 Lean Dolly loaded with 400 kg = 3400 kg in the
train evenly distributed load
www.LeanProducts.eu Lean Manufacturing Solutions
7 Corporate presentation May 2013
Tow bar function and connecting the dollies
www.LeanProducts.eu Lean Manufacturing Solutions
8 Corporate presentation May 2013
Strap devices
Dolly has two automatic
strapping devices
Strap could be pulled out when
handle is pushed to inside
Take loose off by pressing red
button of the device
Tighten up strap by using
handle
Connect metal hooks to dolly
chassis holes
Release strap using handle and take loose
strap back to device by pressing red button
Make sure that strap is fully back to device and
place extra strap inside of the dolly chassis for
example
Use extra strap if device’s strap is
not long enough
www.LeanProducts.eu Lean Manufacturing Solutions
9 Corporate presentation May 2013
Manual handling & handle
Use swinging handle if load is high.
DANGER!
Do not put fingers between moving
handle and fixed handle
Always use swivel wheel brake
when parked.
Apply brake by pressing down pedal
and release by lifting pedal up or
pusing at its upper pedal forward.
www.LeanProducts.eu Lean Manufacturing Solutions
10 Corporate presentation May 2013
Forklift handling
• Take special care when lifting dolly, loading or unloading pallet size dollies!
• Always lift the dolly that forks will cover fully underneath surface.
• Make sure that load on top is evenly distributed.
www.LeanProducts.eu Lean Manufacturing Solutions
11 Corporate presentation May 2013
• In the warehouse max. 6 empty dollies
• Swivel wheels must be turned inside direction
Maximum load and stacking
• Max. load per dolly: 1,000 kg
• Note that dollies are not stackable when loaded!
www.LeanProducts.eu Lean Manufacturing Solutions
12 Corporate presentation May 2013
Transport safety
• ALWAYS SECURE LOAD PROPER WAY!
• Wheeled units should be secured by using combination ofboth lashing and blocking.
–However if the unit is enclosed on all sides by eitherthe framework of the carrying vehicle of other units, itmay be transported without being lashed, but itshould still be subject to blocking.
–Note that dolly strap devices are designed for secureload on dolly itself only.
• We recommend the loaded dollies always to be stored ona flat surface at the warehouse.
• The truck should always park on flat surface forloading/unloading.
www.LeanProducts.eu Lean Manufacturing Solutions
13 Corporate presentation May 2013
Safety equipment & defective products
• It is recommended to wear gloves and safety shoes when handling the dollies.
• The first action is to mark the defective/damaged products right away and put
them aside. A defective tray, box, crate, dolly or pallet should not be in use
because it is very difficult and dangerous to handle.
• Please send us pictures of the defective products and explanations to contact-
www.LeanProducts.eu Lean Manufacturing Solutions
14 Corporate presentation May 2013
Instructions for Use and Cleaning the Lean products
• Regular cleaning and washing of Dollies will ensure proper operation and long lifespan of the load carriers. However, the cleaning and washing
• must be done carefully to maintain the corrosion resistance of the electroplating.
• Washing can be done with water or high pressure spray:
• water temperature max. +50°C
• water pressure max. 5,0 bar
• time exposed to water injection/spray max. 90 seconds
• ensure adequate air ventilation to dry the load carriers after washing
• When using additional detergents:
• pH-value of the detergent max. 10
• concentration of the detergent max. 0,5 – 2,0%
• rinse the load carriers properly from detergents with pure water
• always confirm first the suitability on the detergent supplier information
www.LeanProducts.eu Lean Manufacturing Solutions