Palo Alto | Mercedes-Benz...2016/05/09 · ISO 9001 LM79 / LM80 Compliant 3G Vibration Rated IP66...

Palo Alto | Mercedes-BenzARB Exterior Lighting Fixtures | 05.19.2016

GLEON GALLEON LED

1-10 Light Squares

Solid State LED

AREA/SITE LUMINAIRE

McGraw-Edison

SPECIFICATION FEATURES

ConstructionExtruded aluminum driver enclosure thermally isolated from Light Squares for optimal thermal performance. Heavy-wall, die-cast aluminum end caps enclose housing and die-cast aluminum heat sinks. A unique, patent pending interlocking housing and heat sink provides scalability with superior structural rigidity. 3G vibration tested. Optional tool-less hardware available for ease of entry into electrical chamber. Housing is IP66 rated.

OpticsChoice of 16 patented, high-efficiency AccuLED Optics. The optics are precisely designed to shape the distribution maximizing efficiency and application spacing. AccuLED Optics create consistent distributions with the scalability to meet customized application requirements. Offered standard in 4000K (+/- 275K) CCT and minimum 70 CRI. Optional 6000K CCT and 3000K CCT. For the ultimate level of spill light control, an optional house side shield accessory can be field or factory installed. The

house side shield is designed to seamlessly integrate with the SL2, SL3, SL4 or AFL optics.

ElectricalLED drivers are mounted to removable tray assembly for ease of maintenance. 120-277V 50/60Hz, 347V 60Hz or 480V 60Hz operation. 480V is compatible for use with 480V Wye systems only. Standard with 0-10V dimming. Shipped standard with Eaton proprietary circuit module designed to withstand 10kV of transient line surge. The Galleon LED luminaire is suitable for operation in -40°C to 40°C ambient environments. For applications with ambient temperatures exceeding 40°C, specify the HA (High Ambient) option. Light Squares are IP66 rated. Greater than 90% lumen maintenance expected at 60,000 hours. Available in standard 1A drive current and optional 530mA and 700mA drive currents. MountingExtruded aluminum arm includes internal bolt guides allowing for easy positioning of fixture during

assembly. Designed for pole or wall mounting. When mounting two or more luminaires at 90° or 120° apart, the EA extended arm may be required. Refer to the arm mounting requirement table on page 3. Round pole top adapter included. For wall mounting, specify wall mount bracket option. 3G vibration rated.

FinishHousing finished in super durable TGIC polyester powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. Heat sink is powder coated black. Standard colors include black, bronze, grey, white, dark platinum and graphite metallic. RAL and custom color matches available. Consult the McGraw-Edison Architectural Colors brochure for the complete selection.

WarrantyFive-year warranty.

TD500020EN2015-06-04 13:56:33

The Galleon™ LED luminaire delivers exceptional performance in a highly scalable, low-profile design. Patented, high-efficiency AccuLED Optics™ system provides uniform and energy conscious illumination to walkways, parking lots, roadways, building areas and security lighting applications. IP66 rated.

DESCRIPTION

*www.designlights.org

S

YSTEMS

C

E RT I F I E

D

C E R T I F I C A T I O N D A T AUL/cUL Wet Location ListedISO 9001LM79 / LM80 Compliant3G Vibration RatedIP66 RatedDesignLights Consortium® Qualified*

E N E R G Y D A T AElectronic LED Driver>0.9 Power Factor<20% Total Harmonic Distortion120V-277V 50/60Hz347V & 480V 60Hz-40°C Min. Temperature40°C Max. Temperature50°C Max. Temperature (HA Option)

POLE MOUNT

WALL MOUNT“A”

3-15/16" [100mm]

10-5/32" [256mm]

6-3/16" [157mm]

21-3/4" [553mm] "B"

21-3/4" [553mm] 7" [178mm]

2-7/16"[61mm]

DIMENSION DATA

Number of Light Squares

“A” Width“B” Standard Arm Length

“B” Optional Arm Length 1

Weight with Arm(lbs.)

EPA with Arm 2

(Sq. Ft.)

1-4 15-1/2" (394mm) 7" (178mm) 10" (254mm) 33 (15.0 kgs.) 0.96

5-6 21-5/8" (549mm) 7" (178mm) 10" (254mm) 44 (20.0 kgs.) 1.00

7-8 27-5/8" (702mm) 7" (178mm) 13" (330mm) 54 (24.5 kgs.) 1.07

9-10 33-3/4" (857mm) 7" (178mm) 16" (406mm) 63 (28.6 kgs.) 1.12

NOTES: 1 Extended arm option may be required when mounting two or more fixtures per pole at 90° or 120°. Refer to arm mounting requirement table. 2 EPA calculated with optional arm length.

DIMENSIONS

Catalog # Type

Date

Project

Comments

Prepared by

FIXTURE TYPE S1 S2 S3S11

Specifications and dimensions subject to change without notice.

Eaton 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lighting

GLEON GALLEON LED

TD500020EN2015-06-04 13:56:33

Standard

Street Side

House Side

Street Side

House Side

Street Side

House Side

Optics Rotated Left @ 90° [L90] Optics Rotated Right @ 90° [R90]

OPTIC ORIENTATION

TY P E " N "3/4" [19mm]

DiameterHole

(2) 9/16" [14mm]Diameter

Holes

1-3/4"[44mm]

7/8" [22mm]

2"[51mm]

DRILLING PATTERN

Asymmetric Area Distributions

Symmertric Distributions

T3(Type III)

SL2(Type II with Spill Control)

SL3(Type III with Spill Control)

T4FT(Type IV Forward Throw)

T4W(Type IV Wide)

SL4(Type IV with Spill Control)

Specialized Distributions

Asymmetric Roadway Distributions

AFL(Automotive Frontline)

SLL(90° Spill Light Eliminator Left)

SLR(90° Spill Light Eliminator Right)

T2R(Type II Roadway)

RW(Rectangular Wide Type I)

T3R(Type III Roadway)

5NQ(Type V Square Narrow)

5MQ(Type V Square Medium)

5WQ(Type V Square Wide)

T2(Type II)

OPTICAL DISTRIBUTIONS

2 @ 180° Triple1

4 @ 90°

2 @ 90° Triple2 2 @ 120°

NOTES: 1 Round poles are 3 @ 120°. Square poles are 3 @ 90°. 2 Round poles are 3 @ 90°.

Con� guration 90° Apart 120° Apart

GLEON-AE-017" Arm

(Standard)7" Arm

(Standard)

GLEON-AE-02 7" Arm(Standard)

7" Arm(Standard)

GLEON-AE-037" Arm

(Standard)7" Arm

(Standard)

GLEON-AE-04 7" Arm(Standard)

7" Arm(Standard)

GLEON-AE-05 10" Extended Arm(Required)

7" Arm(Standard)


7" Arm(Standard)


13" Extended Arm(Required)



GLEON-AE-0916" Extended Arm

(Required)16" Extended Arm

(Required)



ARM MOUNTING REQUIREMENTS

FIXTURE TYPE S1 S2 S3



GLEON GALLEON LED

TD500020EN2015-06-04 13:56:33

Number of Light Squares 1 2 3 4 5 6 7 8 9 10

Drive Current 1A 1A 1A 1A 1A 1A 1A 1A 1A 1A

Nominal Power (Watts) 56 107 157 213 264 315 370 421 475 528

Input Current @ 120V (A) 0.47 0.90 1.31 1.79 2.21 2.64 3.09 3.51 3.96 4.41

Input Current @ 208V (A) 0.28 0.51 0.74 1.02 1.25 1.48 1.76 1.99 2.22 2.50

Input Current @ 240V (A) 0.25 0.45 0.65 0.90 1.10 1.30 1.55 1.75 1.95 2.20

Input Current @ 277V (A) 0.23 0.41 0.59 0.82 1.00 1.18 1.41 1.59 1.77 2.00

Optics

T2Lumens 5,272 10,303 15,373 20,313 25,168 30,118 35,618 40,357 45,018 49,842

BUG Rating B1-U0-G1 B2-U0-G2 B2-U0-G2 B3-U0-G3 B3-U0-G4 B3-U0-G4 B3-U0-G4 B3-U0-G5 B4-U0-G5 B4-U0-G5

T2RLumens 5,597 10,938 16,321 21,565 26,719 31,974 37,813 42,844 47,792 52,914


T3Lumens 5,374 10,501 15,669 20,704 25,652 30,697 36,303 41,134 45,884 50,802


T3RLumens 5,493 10,735 16,017 21,164 26,222 31,379 37,110 42,048 46,904 51,930


T4FTLumens 5,405 10,562 15,760 20,824 25,801 30,875 36,514 41,372 46,150 51,096


T4WLumens 5,335 10,426 15,556 20,555 25,468 30,476 36,042 40,838 45,554 50,436


SL2Lumens 5,263 10,285 15,347 20,278 25,124 30,066 35,556 40,288 44,940 49,756


SL3Lumens 5,373 10,500 15,667 20,701 25,649 30,693 36,298 41,128 45,878 50,794


SL4Lumens 5,105 9,976 14,886 19,669 24,370 29,163 34,488 39,078 43,591 48,262


5NQLumens 5,542 10,830 16,160 21,352 26,455 31,658 37,439 42,421 47,320 52,392


5MQLumens 5,644 11,029 16,457 21,745 26,942 32,241 38,128 43,202 48,191 53,356


5WQLumens 5,659 11,059 16,501 21,803 27,014 32,327 38,230 43,317 48,320 53,498


SLL/SLRLumens 4,722 9,227 13,767 18,191 22,539 26,971 31,897 36,141 40,315 44,635


RWLumens 5,492 10,732 16,014 21,159 26,216 31,372 37,101 42,038 46,893 51,918


AFLLumens 5,512 10,771 16,072 21,236 26,311 31,486 37,236 42,191 47,063 52,107


* Nominal data for 4000K CCT.

NOMINAL POWER AND LUMENS (1A)

Ambient Temperature

Lumen Multiplier

0°C 1.02

10°C 1.01

25°C 1.00

40°C 0.99

50°C 0.97

LUMEN MULTIPLIER

Ambient Temperature

TM-21 LumenMaintenance

(60,000 Hours)

Theoretical L70(Hours)

25°C > 94% > 350,000

40°C > 93% > 250,000

50°C* > 90% > 170,000

* 50°C lumen maintenance data applies to 530mA and 700mA drive currents.

LUMEN MAINTENANCE





Drive Current 700mA 700mA 700mA 700mA 700mA 700mA 700mA 700mA 700mA 700mA


Input Current @ 120V (A) 0.32 0.59 0.86 1.14 1.45 1.72 2 2.28 2.58 2.86

Input Current @ 208V (A) 0.21 0.36 0.51 0.67 0.87 1.02 1.18 1.34 1.53 1.69

Input Current @ 240V (A) 0.19 0.32 0.45 0.59 0.77 0.90 1.04 1.18 1.35 1.49

Input Current @ 277V (A) 0.20 0.29 0.40 0.51 0.69 0.80 0.91 1.02 1.20 1.31

Optics

T2Lumens 3,854 7,531 11,237 14,847 18,395 22,013 26,033 29,497 32,904 36,430


T2RLumens 4,091 7,995 11,929 15,762 19,529 23,370 27,638 31,316 34,932 38,676


T3Lumens 3,928 7,676 11,453 15,133 18,750 22,437 26,534 30,065 33,537 37,132


T3RLumens 4,015 7,846 11,707 15,469 19,166 22,936 27,124 30,733 34,283 37,957


T4FTLumens 3,951 7,720 11,519 15,221 18,858 22,567 26,688 30,240 33,732 37,347


T4WLumens 3,900 7,620 11,370 15,024 18,615 22,276 26,343 29,849 33,296 36,864


SL2Lumens 3,847 7,518 11,217 14,821 18,364 21,975 25,988 29,447 32,847 36,368


SL3Lumens 3,927 7,675 11,451 15,131 18,747 22,434 26,531 30,061 33,533 37,126


SL4Lumens 3,731 7,292 10,880 14,376 17,812 21,315 25,208 28,562 31,861 35,275


5NQLumens 4,051 7,916 11,811 15,606 19,336 23,139 27,365 31,006 34,587 38,294


5MQLumens 4,125 8,062 12,029 15,894 19,692 23,565 27,869 31,577 35,224 38,999


5WQLumens 4,136 8,083 12,061 15,936 19,745 23,628 27,943 31,661 35,318 39,103


SLL/SLRLumens 3,451 6,744 10,063 13,296 16,474 19,714 23,314 26,416 29,467 32,625


RWLumens 4,014 7,844 11,704 15,465 19,162 22,930 27,118 30,726 34,274 37,948


AFLLumens 4,029 7,873 11,747 15,522 19,231 23,014 27,216 30,838 34,399 38,086



NOMINAL POWER AND LUMENS (700MA)

GLEON GALLEON LED

TD500020EN2015-06-04 13:56:33

Ambient Temperature

Lumen Multiplier

0°C 1.02

10°C 1.01

25°C 1.00

40°C 0.99

50°C 0.97

LUMEN MULTIPLIER

Ambient Temperature


(60,000 Hours)


25°C > 94% > 350,000

40°C > 93% > 250,000

50°C* > 90% > 170,000


LUMEN MAINTENANCE




TD500020EN2015-06-04 13:56:33

GLEON GALLEON LED


Drive Current 530mA 530mA 530mA 530mA 530mA 530mA 530mA 530mA 530mA 530mA


Input Current @ 120V (A) 0.25 0.45 0.66 0.86 1.07 1.32 1.52 1.72 1.93 2.14

Input Current @ 208V (A) 0.17 0.28 0.39 0.51 0.63 0.78 0.9 1.02 1.14 1.26

Input Current @ 240V (A) 0.17 0.25 0.35 0.45 0.55 0.70 0.80 0.90 1.00 1.10

Input Current @ 277V (A) 0.19 0.24 0.32 0.40 0.49 0.64 0.72 0.80 0.89 0.98

Optics

T2Lumens 3,079 6,017 8,978 11,862 14,697 17,588 20,800 23,567 26,289 29,106


T2RLumens 3,269 6,388 9,531 12,593 15,603 18,672 22,082 25,020 27,909 30,900


T3Lumens 3,138 6,133 9,150 12,091 14,980 17,926 21,200 24,021 26,795 29,667


T3RLumens 3,208 6,269 9,354 12,359 15,313 18,325 21,671 24,555 27,390 30,326


T4FTLumens 3,156 6,168 9,203 12,161 15,067 18,030 21,323 24,160 26,950 29,839


T4WLumens 3,116 6,088 9,084 12,004 14,872 17,797 21,047 23,848 26,602 29,453


SL2Lumens 3,074 6,006 8,962 11,842 14,672 17,558 20,764 23,527 26,244 29,056


SL3Lumens 3,138 6,132 9,149 12,089 14,978 17,924 21,197 24,018 26,791 29,662


SL4Lumens 2,981 5,826 8,693 11,486 14,231 17,030 20,140 22,820 25,456 28,184


5NQLumens 3,236 6,324 9,437 12,469 15,449 18,487 21,863 24,773 27,634 30,595


5MQLumens 3,296 6,441 9,610 12,698 15,733 18,828 22,266 25,229 28,142 31,158


5WQLumens 3,305 6,458 9,636 12,732 15,775 18,878 22,325 25,296 28,217 31,241


SLL/SLRLumens 2,757 5,388 8,040 10,623 13,162 15,751 18,627 21,105 23,543 26,066


RWLumens 3,207 6,267 9,351 12,356 15,309 18,320 21,666 24,549 27,384 30,319


AFLLumens 3,219 6,290 9,385 12,401 15,365 18,387 21,745 24,638 27,484 30,429



NOMINAL POWER AND LUMENS (530MA)

Ambient Temperature

Lumen Multiplier

0°C 1.02

10°C 1.01

25°C 1.00

40°C 0.99

50°C 0.97

LUMEN MULTIPLIER

Ambient Temperature


(60,000 Hours)


25°C > 94% > 350,000

40°C > 93% > 250,000

50°C* > 90% > 170,000


LUMEN MAINTENANCE




TD500020EN2015-06-04 13:56:33

Sample Number: GLEON-AE-04-LED-E1-T3-GM-700

Product Family 1 Light EngineNumber of Light Squares 2 Lamp Type Voltage Distribution Color Mounting

GLEON=Galleon AE= 1A Drive Current

01= 102= 203= 304= 405= 506= 607= 708= 809= 910= 10

LED= Solid State Light Emitting Diodes

E1=120-277V347=347V 3

480=480V 3, 4

T2=Type IIT2R=Type II RoadwayT3=Type IIIT3R=Type III RoadwayT4FT=Type IV Forward ThrowT4W=Type IV Wide5NQ=Type V Narrow5MQ=Type V Square Medium5WQ=Type V Square WideSL2=Type II w/Spill ControlSL3=Type III w/Spill ControlSL4=Type IV w/Spill ControlSLL=90° Spill Light Eliminator LeftSLR=90° Spill Light Eliminator Right RW=Rectangular Wide Type IAFL=Automotive Frontline

AP=GreyBZ=BronzeBK=BlackDP=Dark PlatinumGM=Graphite MetallicWH=White

[Blank]= Arm for Round or Square Pole

EA=Extended Arm 5

MA= Mast Arm Adapter 6

WM=Wall Mount

Options (Add as Suffi x) Accessories (Order Separately)

2L=Two Circuits 7, 8

7030=70 CRI 3000K 9

8030=80 CRI 3000K 10 7050=70 CRI 5000K 10 7060=70 CRI 6000K 9

530= Drive Current Factory Set to 530mA 11

700= Drive Current Factory Set to 700mA 11

F=Single Fuse (120, 277 or 347V. Must Specify Voltage)FF=Double Fuse (208, 240 or 480V. Must Specify Voltage) P=Button Type Photocontrol (120, 208, 240 or 277V)PER7=NEMA 7-PIN Twistlock Photocontrol ReceptacleR= NEMA Twistlock Photocontrol ReceptacleHA=50°C High Ambient 8, 12

MS/DIM-L08= Motion Sensor for Dimming Operation, Maximum 8' Mounting Height 13, 14, 15, 16, 17

MS/DIM-L20= Motion Sensor for Dimming Operation, 9' - 20' Mounting Height 13, 14, 15, 16, 17

MS/DIM-L40= Motion Sensor for Dimming Operation, 21' - 40' Mounting Height 13, 14, 15, 16, 19

MS/DIM-L40W= Motion Sensor for Dimming Operation, 21' - 40' Mounting Height (Wide Range) 13, 14, 15, 16, 20

MS/X-L08= Bi-Level Motion Sensor, Maximum 8' Mounting Height 13, 14, 15, 16, 17, 21

MS/X-L20= Bi-Level Motion Sensor, 9' - 20' Mounting Height 13, 14, 15, 16, 18, 21

MS/X-L40= Bi-Level Motion Sensor, 21' - 40' Mounting Height 13, 14, 15, 16, 19, 21

MS/X-L40W= Bi-Level Motion Sensor, 21' - 40' Mounting Height (Wide Range) 13, 14, 15, 16, 20, 21

MS-L08= Motion Sensor for ON/OFF Operation, Maximum 8' Mounting Height 13, 14, 15, 16, 17

MS-L20=Motion Sensor for ON/OFF Operation, 9' - 20' Mounting Height 13, 14, 15, 16, 18

MS-L40= Motion Sensor for ON/OFF Operation, 21' - 40' Mounting Height 13, 14, 15, 16, 19

MS-L40W= Motion Sensor for ON/OFF Operation, 21' - 40' Mounting Height (Wide Range) 13, 14, 15, 16, 20

DIMRF-LW= LumaWatt Wireless Sensor, Wide Lens for 8' - 16' Mounting Height 22

DIMRF-LN= LumaWatt Wireless Sensor, Narrow Lens for 16' - 40' Mounting Height 22

L90=Optics Rotated 90° LeftR90=Optics Rotated 90° RightMT=Factory Installed Mesh TopTH=Tool-less Door HardwareLCF=Light Square Trim Plate Painted to Match Housing 23

HSS=Factory Installed House Side Shield 24

CE=CE Marking 25

OA/RA1016=NEMA Photocontrol Multi-Tap - 105-285VOA/RA1027=NEMA Photocontrol - 480VOA/RA1201=NEMA Photocontrol - 347VOA/RA1013=Photocontrol Shorting CapOA/RA1014=120V PhotocontrolMA1252=10kV Surge Module ReplacementMA1036-XX=Single Tenon Adapter for 2-3/8" O.D. TenonMA1037-XX=2@180° Tenon Adapter for 2-3/8" O.D. TenonMA1197-XX=3@120° Tenon Adapter for 2-3/8" O.D. TenonMA1188-XX=4@90° Tenon Adapter for 2-3/8" O.D. TenonMA1189-XX=2@90° Tenon Adapter for 2-3/8" O.D. TenonMA1190-XX=3@90° Tenon Adapter for 2-3/8" O.D. TenonMA1191-XX=2@120° Tenon Adapter for 2-3/8" O.D. TenonMA1038-XX=Single Tenon Adapter for 3-1/2" O.D. TenonMA1039-XX=2@180° Tenon Adapter for 3-1/2" O.D. TenonMA1192-XX=3@120° Tenon Adapter for 3-1/2" O.D. TenonMA1193-XX=4@90° Tenon Adapter for 3-1/2" O.D. TenonMA1194-XX=2@90° Tenon Adapter for 3-1/2" O.D. TenonMA1195-XX=3@90° Tenon Adapter for 3-1/2" O.D. TenonFSIR-100=Wireless Confi guration Tool for Occupancy Sensor 26

GLEON-MT1=Field Installed Mesh Top for 1-4 Light SquaresGLEON-MT2=Field Installed Mesh Top for 5-6 Light SquaresGLEON-MT3=Field Installed Mesh Top for 7-8 Light SquaresGLEON-MT4=Field Installed Mesh Top for 9-10 Light Squares LS/HSS=Field Installed House Side Shield 24, 27

NOTES: 1. DesignLights Consortium® Qualifi ed. Refer to www.designlights.org Qualifi ed Products List under Family Models for details. 2. Standard 4000K CCT and minimum 70 CRI.3. Requires the use of a step down transformer when combined with MS/DIM, MS/X or DIMRF.4. Only for use with 480V Wye systems. Per NEC, not for use with ungrounded systems, impedance grounded systems or corner grounded systems (commonly known as Three Phase Three Wire Delta, Three Phase High Leg

Delta and Three Phase Corner Grounded Delta systems).5. May be required when two or more luminaires are oriented on a 90° or 120° drilling pattern. Refer to arm mounting requirement table.6. Factory installed.7. 2L is not available with MS, MS/X or MS/DIM at 347V or 480V. 2L in AE-02 through AE-04 requires a larger housing, normally used for AE-05 or AE-06. Extended arm option may be required when mounting two or more

fi xtures per pole at 90° or 120°. Refer to arm mounting requirement table.8. Not available with LumaWatt wireless sensors. 9. Extended lead times apply. Use dedicated IES fi les for 3000K and 6000K when performing layouts. These fi les are published on the Galleon luminaire product page on the website.10. Extended lead times apply. For 8030, factor 7030 IES fi les x .92 (8% lumen loss). For 7050, use 7060 IES fi les.11. 1 Amp standard. Use dedicated IES fi les for 530mA and 700mA when performing layouts. These fi les are published on the Galleon luminaire product page on the website. 12. 50°C lumen maintenance data applies to 530mA and 700mA drive currents.13. Consult factory for more information.14. Utilizes internal step down transformer when 347V or 480V is selected.15. The FSIR-100 confi guration tool is required to adjust parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your lighting representative at Eaton for more information.16. Not available with HA option.17. Approximately 22' detection diameter at 8' mounting height.18. Approximately 40' detection diameter at 20' mounting height.19. Approximately 60' detection diameter at 40' mounting height.20. Approximately 100' detection diameter at 40' mounting height. 21. Replace X with number of Light Squares operating in low output mode.22. LumaWatt wireless sensors are factory installed only requiring network components RF-EM-1, RF-GW-1 and RF-ROUT-1 in appropriate quantities. See www.eaton.com/lighting for LumaWatt application information.23. Not available with house side shield (HSS).24. Only for use with SL2, SL3, SL4 and AFL distributions. The Light Square trim plate is painted black when the HSS option is selected.25. CE is not available with the DIMRF, MS, MS/X, MS/DIM, F, FF, P, R or PER7 options.26. This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your lighting representative at Eaton for more information27. One required for each Light Square.

ORDERING INFORMATION

GLEON GALLEON LEDFIXTURE TYPE S1 S2 S3

Type:BEGA Product:

Project:Voltage:

Color:Options:

Modified:

BEGA-US 1000 BEGA Way, Carpinteria, CA 93013 (805) 684-0533 FAX (805) 566-9474 www.bega-us .com ©copyright BEGA-US 2015 Updated 04/15

Post construction: Made from two (2) rectangular aluminum extrusions, 1/8“ wall thickness, mechanically fastened to a rectangular extruded lamp housing (top) and a wiring/driver compartment (bottom). Die castings are marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy.

Enclosure: One piece die-cast aluminum housing (top). Tempered safety glass lens. Fully gasketed using a one piece molded high temperature silicone gaskest for weather tight operation. Adjustable reflector made from pure anodized aluminum. The optical system can be adjusted to 0°, 15°, or 30°

Electrical: 50.6W LED luminaire, 56 total system watts, -30°C start temperature, surge protection. Integral 120V through 277V electronic LED driver, 0-10V dimming. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 4000K with a >80 CRI. Available in 3000K (>80 CRI); add suffix K3 to order.

Note: LEDs supplied with luminaire. Due to the dynamic nature of LED technology, LED luminaire data on this sheet is subject to change at the discretion of BEGA-US. For the most current technical data, please refer to www.bega-us.com.

Anchor base: Supplied with an 890 R anchorage, consisting of a heavy gauge welded assembly of .157“ thick galvanized steel. The luminaire slip fits over the base and is secured by eight (8) stainless steel fasteners.

Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order.

CSA certified to U.S. and Canadian standards, suitable for wet locations. Protection class IP65

Weight: 179.7 lbs.

Luminaire Lumens: 2385

LED light building element

Lamp A B C Anchorage

9075 LED 50.6W LED 15 3⁄4 x 7 85 1⁄2 177 890 R

C

A

B

0° 15° 30°

FIXTURE TYPE S4

Type:BEGA Product:

Project:Voltage:

Color:Options:

Modified:

BEGA-US 1000 BEGA Way, Carpinteria, CA 93013 (805) 684-0533 FAX (805) 566-9474 ©copyright BEGA-US 2014 Updated 10/14

Post construction: Made from two (2) rectangular aluminum extrusions, 1/8“ wall thickness, mechanically fastened to a rectangular extruded lamp housing (top) and a wiring/driver compartment (bottom). Die castings are marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy.

Enclosure: One piece die-cast aluminum housing (top). Tempered safety glass lens. Fully gasketed using a one piece molded high temperature silicone gaskest for weather tight operation. Adjustable reflector made from pure anodized aluminum. The optical system can be adjusted to 0°, 15°, or 30°

Electrical: 25.3W LED luminaire, 29.5 total system watts, -30°C start temperature. Integral 120V through 277V electronic LED driver, 0-10V dimming. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 3000K with an 85 CRI. Available in 4000K (85 CRI); add suffix K4 to order.


Anchor base: Heavy die-cast aluminum, slotted for precise alignment. Bollard secures to base with one stainless steel set screw. Mounts to BEGA 895A anchorage kit (supplied).



Weight: 28.7 lbs.

LED bollard with adjustable light distribution

Lamp A B C Anchorage

8062 LED 25.3W LED 10 3⁄8 43 7⁄8 5 1⁄4 895 A

A C

B

A

FIXTURE TYPE S5TYPE S5A & S5B

DSXF2 LED

Series Light Engines Performance Package Distribution Voltage Mounting Options Finish (required)

DSXF2 LED 3 Three COB engines 1

4 Four COB engines

530 mA options:A530/30K 3000KA530/40K 4000KA530/50K 5000K

NSP Narrow spot

MSP Medium spot

MFL Medium floodFL FloodWFL Wide floodWFR Wide flood,

rectangularHMF Horizontal flood

MVOLT 2

120 2

208 2

240 2

277 2

347

480

Shipped included

THK Knuckle with 1/2” NPS threaded pipe

YKC62 Yoke with 16-3 SO cord

IS Integral slipfitter(fits 2-3/8” O.D.tenon)

Shipped separately 3

DSXF1/2TS Tenon slipfitter (2-3/8” O.D. THK required)

FTS CG6 Tenon slipfitter (2-7/8” O.D. YKC62 required)

Shipped installedPE Photocontrol, button style 4

DMG 0-10V dimming driver (no controls) 1, 5

SF Single fuse (120, 277, 347V) 6

DF Double fuse (208, 240, 480V) 6

Shipped separately 3

UBV Upper/bottom visor (universal)FV Full visorVG Vandal guard

DDBXD Dark bronze

DBLXD BlackDNAXD Natural

aluminum

DWHXD White

D-Series Size 2LED Flood Luminaire

Specifications

Ordering Information EXAMPLE: DSXF2 LED 4 A530/40K MSP MVOLT THK DDBXD

NOTES

1 Not available with 347 or 480V.2 MVOLT driver operates on any line voltage from

120-277V. Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options) or photocontrol (PE).

3 Also available as separate accessories; see Accessories information at left.

4 Photocontrol (PE) requires 120, 208, 240, 277 or 347 voltage option.

5 Not available with three-engine product (DSXF2 LED 3).

6 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option.

Catalog Number

Notes

Type

Stock configurations are offered for shorter lead times:

EPA: 0.8 ft2

(0.05 m2)

Depth: 3-1/8”(8.0 cm)

Width: 12-7/8”(32.6 cm)

Height: 7-3/4”(19.8 cm)

Overall Height

12”(30.5 cm)

Weight: 10.5 lbs(4.8 kg)

One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com© 2012-2014 Acuity Brands Lighting, Inc. All rights reserved.

Hit the Tab key or mouse over the page to see all interactive elements.

Introduction

The D-Series Size 2 Flood features precision optics to beautifully illuminate a variety of applications as its sleek, compact styling blends seamlessly with its environment.

The D-Series Flood reflector systems and cutting-edge chip-on-board LED technology produce low field-to-beam ratios for minimal spill light and incredible photometric performance. It’s the ideal long-life replacement for 150 - 250W metal halide floods, with typical energy savings of 70% and expected service life of over 100,000 hours.

Standard Part Number Stock Part Number

DSXF2 LED 3 A530/40K WFL MVOLT THK DDBXD DSXF2 LED 3 40K




DW

H

OH

AccessoriesOrdered and shipped separately.

DSXF1/2TS DDBXD U Slipfitter for 1-1/4” to 2-3/8” OD tenons; mates with 1/2” threaded knuckle (specify finish)

FTS CG6 DDBXD U Slipfitter for 2-3/8” to 2-7/8” OD tenons; mates with yoke mount (specify finish)

FRWB DDBXD U Radius wall bracket, 2-3/8” OD tenon (specify finish)

FSPB DDBXD U Steel square pole bracket, 2-3/8” OD tenon (specify finish)

DSXF2UBV DDBXD U Upper/bottom visor accessory (specify finish)

DSXF2FV DDBXD U Full visor accessory (specify finish)

DSXF2VG U Vandal guard accessoryFor more mounting options, visit our

Floodlighting Accessories pages.

FIXTURE TYPE S6

http://www.lithonia.com/Micro_Webs/ArchitecturalColors/

http://www.lithonia.com


http://www.lightingfacts.com/default.aspx?cp=content/products

http://lithonia.acuitybrands.com/D-Series-LED-Lighting/D-Series-LED-area-Lighting.aspx

http://www.lithonia.com/SpecSheets.aspx?Cid=70343&pt=Outdoor

http://www.lithonia.com/commercial/D-Series%20Flood.html?pt=Outdoor

http://www.designlights.org

To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Flood Size 2 homepage. Photometric Diagrams


Isocandela plots for the DSXF2 LED 4 A530/40K.

LEGEND(% Max cd)

10%

20%

30%

40%

50%

60%

75%

90%

Test

No

. LTL

2217

4P6

test

ed in

acc

ord

ance

w

ith IE

SNA

LM

-79-

08.

Test

No

. LTL

2217

3P6

test

ed in

acc

ord

ance

w

ith IE

SNA

LM

-79-

08.

Test

No

. LTL

2215

3P6

test

ed in

acc

ord

ance

w

ith IE

SNA

LM

-79-

08.

Test

No

. LTL

2215

9P6

test

ed in

acc

ord

ance

w

ith IE

SNA

LM

-79-

08.

0° 20° 40° 60° 80°-20°-40°-60°-80°

0°

20°

40°

60°

80°

-20°

-40°

-60°

-80°

MSP

0° 20° 40° 60° 80°-20°-40°-60°-80°

0°

20°

40°

60°

80°

-20°

-40°

-60°

-80°

WFL

0° 20° 40° 60° 80°-20°-40°-60°-80°

0°

20°

40°

60°

80°

-20°

-40°

-60°

-80°

FL

0° 20° 40° 60° 80°-20°-40°-60°-80°

0°

20°

40°

60°

80°

-20°

-40°

-60°

-80°

HMF

Mounting, Options and Accessories

THK - Knuckle with 1/2” NPS threaded pipe

IS – Integral slipfitterH= 2-1/2” (6.3 cm)ID= 2-3/8” (6.0 cm)OD= 3-1/2” (8.8 cm)

UBV – Upper/bottom visorW= 10” (25.4 cm)

H= 2-1/2” (6.3 cm)D= 3” (7.6 cm)

FV – Full visorW= 10” (25.4 cm)

H= 2-1/2” (6.3 cm)D= 3” (7.6 cm)

YKC62 - Yoke with SO cordW= 4-3/4” (12.0 cm)H= 4-1/4” (10.7 cm)D= 2-1/4” (5.7 cm)

H

IDOD

WD

WD W

H

H

VG – Vandal guardW= 10-1/2” (26.6cm)

H= 4“ (10.1cm

W

HD

H

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end-user environment and application. Actual wattage may differ by +/- 8% when operating between 120-480V +/- 10%. Contact factory for performance data on any configurations not shown here.

Light Engines

Drive Current

(mA)

Performance Package

System Watts

Dist.Type

Field Angle

Beam Angle

30K(3000K, 70 CRI)

40K(4000K, 70 CRI)

50K(5000K, 70 CRI)

°H °V °H °V Max Cd Lumens LPW Max Cd Lumens LPW Max Cd Lumens LPW

3 530 A530/--K 54W

NSP 48 49 19 19 19,398 3868 72 20,166 4648 86 20,103 4670 86MSP 50 48 24 23 18,631 4234 78 18,619 5087 94 18,561 5111 95MFL 60 60 47 46 6177 3614 67 7751 4342 80 7726 4363 81FL 85 84 63 62 5069 4813 89 5124 5783 107 5108 5810 108

WFL 106 106 71 72 3573 4776 88 3842 6108 113 3830 5766 107WFR 107 88 85 64 3513 4845 90 3828 5821 108 3816 5849 108HMF 100 62 80 13 3969 2119 39 3479 2546 47 3468 2558 47

4 530 A530/--K 74W

NSP 48 49 19 19 25,870 5159 70 26,893 6198 84 26,809 6228 84MSP 50 48 24 23 25,415 5775 78 24,830 6933 94 24,752 6966 94MFL 60 60 47 46 8237 4820 65 10,336 5791 78 10,304 5818 79FL 85 84 63 62 6760 6419 87 6833 7712 104 6811 7749 105

WFL 106 106 71 72 4758 6359 86 5124 7633 103 5108 7670 104WFR 107 88 85 64 4684 6462 87 5105 7764 105 5089 7801 105HMF 100 62 80 13 5293 2826 38 4639 3396 46 4625 3412 46

Performance Data

Lumen Output

Current (A)

Light Engines

Drive Current (mA)

System Watts 120 208 240 277 347 480

3 530 54W 0.47 0.28 0.22 0.2 0.17 0.12

4 530 74W 0.63 0.37 0.33 0.3 0.22 0.16

Electrical LoadUse these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F).

Lumen Ambient Temperature (LAT) Multipliers

Ambient Lumen Multiplier0°C 32°F 1.07

10°C 50°F 1.04

20°C 68°F 1.02

25°C 77°F 1.0030°C 86°F 0.98

40°C 104°F 0.95

Projected LED Lumen MaintenanceData references the extrapolated performance projections for the DSXF LED 4 A530 platform based on 8400 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11).

To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory.

Operating Hours 0 25,000 50,000 100,000

Lumen Maintenance Factor 1.0 0.94 0.90 0.80

DSXF2-LED

Rev. 10/02/14

FIXTURE TYPE S6



http://www.lithonia.com/commercial/D-Series%20Flood.html?pt=Outdoor

FEATURES & SPECIFICATIONS

INTENDED USE The sleek design of the D-Series Size 2 Flood reflects the embedded high performance LED technology. It is ideal for larger signage, facade and flagpole lighting in many commercial and residential applications.

CONSTRUCTION Die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65). Low EPA (0.8 ft2) for optimized wind loading.

FINISH Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling.

OPTICS A variety of precision-molded vacuum-metallized specular reflectors are engineered for superior field-to-beam ratios, uniformity and spacing. Light engines are available in 3000K (70 CRI min.), 4000K (70 CRI min.) or 5000K (70 CRI min.) configurations. Optional visors offer additional versatility.

ELECTRICAL Light engine(s) consist of chip-on-board (COB) LEDs directly coupled to the housing to maximize heat dissipation and promote long life (100,000 hrs, L80). Class 1 electronic driver has a power factor >90%, THD <20%, and has an expected life of 100,000 hours with <1% failure rate. Surge protection meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).

INSTALLATION Integral adjustable knuckle with 1/2-14 NPS threaded pipe, tenon slipfitter, or yoke mounting, facilitates quick and easy installation to a variety of mounting accessories. This secure connection enables the D-Series Size 2 to withstand up to a 1.5 G vibration load rating per ANSI C136.31.

LISTINGS CSA certified to U.S. and Canadian standards. Luminaire is IP65 rated. Rated for -40°C minimum ambient.

DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.

WARRANTY Five year limited warranty. Full warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.

Note: Specifications subject to change without notice.


DSXF2-LED

Rev. 10/02/14

FIXTURE TYPE S6



www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx


Lamp A B C

3065 LED 8.4W LED 13 47⁄8 4

Recessed wall luminaires with directed light

Type:BEGA Product:

Project:Voltage:

Color:Options:

Modified:


A

B

C

Housing: Constructed of die-cast and extruded aluminum components with integral wiring compartment. Mounting tabs provided. Die castings are marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy.

Enclosure: One piece die-cast aluminum faceplate. Clear tempered glass; .125" thick, machined flush to faceplate surface. Faceplate is secured by four (4) flush, socket head, stainless steel captive screws threaded into stainless steel inserts in the housing casting. Pure anodized aluminum asymmetrical reflector. Continuous high temperature, molded silicone rubber gasket for weather tight operation.

Electrical: 8.4W LED luminaire, 10.2 total system watts, -20°C start temperature. Integral 120V through 277V electronic LED driver, 0-10V dimming. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 3000K with a >80 CRI. Available in 4000K (>80 CRI); add suffix K4 to order.



UL listed for US and Canadian Standards, suitable for wet locations and for installation within 3 feet of ground. Type non-IC. Protection class: IP65.

TYPE S7

DSXW1 LED

Series LEDs Drive Current Color temperature Distribution Voltage Mounting Control Options Other Options Finish (required)

DSXW1 LED 10C 10 LEDs (one engine)

20C 20 LEDs (two engines)

350 350 mA530 530 mA700 700 mA1000 1000 mA

(1 A)

30K 3000 K40K 4000 K50K 5000 KAMBPC Amber

phosphor converted

T2S Type II Short

T2M Type II Medium

T3S Type III Short

T3M Type III Medium

T4M Type IV Medium

TFTM Forward Throw Medium

ASYDF Asym-metric diffuse

MVOLT 1

120 1

208 1

240 1

277 1

347 2

480 2

Shipped included

(blank) Surface mounting bracket

BBW Surface-mounted back box (for conduit entry) 3

Shipped installedPE Photoelectric

cell, button type 4

DMG 0-10V dim-ming driver (no controls)

PIR 180° motion/ambient light sensor, <15’ mtg ht 5

PIRH 180° motion/ambient light sensor, 15-30’ mtg ht 5

ELCW Emergency battery backup (includes exter-nal component enclosure) 6

Shipped installedSF Single fuse

(120, 277 or 347V) 7

DF Double fuse (208, 240 or 480V) 7

HS House-side shield 8

SPD Separate surge protection 9

Shipped separately

BSW Bird-deter-rent spikes

WG Wire guardVG Vandal

guardDDL Diffused

drop lens

DDBXD Dark bronze

DBLXD BlackDNAXD Natural

aluminumDWHXD WhiteDSSXD SandstoneDDBTXD Textured

dark bronze

DBLBXD Textured black

DNATXD Textured natural aluminum

DWHGXD Textured white

DSSTXD Textured sandstone

D-Series Size 1LED Wall Luminaire

Ordering Information EXAMPLE: DSXW1 LED 20C 1000 40K T3M MVOLT DDBTXD

NOTES

1 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options), or photocontrol (PE option).

2 Only available with 20C, 700mA or 1000mA. Not available with PIR or PIRH.3 Back box ships installed on fixture. Cannot be field installed. Cannot be ordered as an accessory.4 Photocontrol (PE) requires 120, 208, 240, 277 or 347 voltage option. Not available with motion/ambient light sensors (PIR or PIRH).5 PIR specifies the Sensor Switch SBGR-10-ODP control; PIRH specifies the Sensor Switch SBGR-6-ODP control; see Motion Sensor Guide for details. Includes

ambient light sensor. Not available with “PE” option (button type photocell). Dimming driver standard. Not available with 20 LED/1000 mA configuration (DSXW1 LED 20C 1000).

6 Cold weather (-20C) rated. Not compatible with conduit entry applications. Not available with BBW mounting option. Not available with fusing. Not available with 347 or 480 voltage options. Emergency components located in back box housing. Emergency mode IES files located on product page at www.lithonia.com

7 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option. Not available with ELCW.8 Also available as a separate accessory; see Accessories information. 9 See the electrical section on page 3 for more details.

Catalog Number

Notes

Type

AccessoriesOrdered and shipped separately.

DSXWHS U House-side shield (one per light engine)

DSXWBSW U Bird-deterrent spikes

DSXW1WG U Wire guard accessory

DSXW1VG U Vandal guard accessory


Hit the Tab key or mouse over the page to see all interactive elements.

Introduction

The D-Series Wall luminaire is a stylish, fully integrated LED solution for building-mount applications. It features a sleek, modern design and is carefully engineered to provide long-lasting, energy-efficient lighting with a variety of optical and control options for customized performance.

With an expected service life of over 20 years of nighttime use and up to 74% in energy savings over comparable 250W metal halide luminaires, the D-Series Wall is a reliable, low-maintenance lighting solution that produces sites that are exceptionally illuminated.

Luminaire

Width: 13-3/4”(34.9 cm)

Depth: 10”(25.4 cm)

Height: 6-3/8”(16.2 cm)

Back Box (BBW, ELCW)

Width: 13-3/4”(34.9 cm)

Depth: 4”(10.2 cm)

Height: 6-3/8”(16.2 cm)

For 3/4” NPT side-entry conduit (BBW only)

Specifications

Weight: 12 lbs(5.4 kg)

BBW Weight:

5 lbs(2.3 kg)

ELCW Weight:

10 lbs(4.5 kg)

D

H

W

413-3/4

6-3/8

FOR 3/4" NPTSIDE-ENTRY CONDUIT3-PLACES (BBW ONLY)

D

H

413-3/4

6-3/8

FOR 3/4" NPTSIDE-ENTRY CONDUIT3-PLACES (BBW ONLY)

W

FIXTURE TYPE S8

http://www.sensorswitch.com/OnlineCatalog.aspx?sn=SBGR%2010%20ODP

http://www.acuitybrandslighting.com/library/ll/documents/specsheets/motion-sensor-guide.pdf

http://www.sensorswitch.com/OnlineCatalog.aspx?sn=SBGR%206%20ODP



http://lithonia.acuitybrands.com/D-Series-LED-Lighting/D-Series-LED-area-Lighting.aspx

http://www.lithonia.com/commercial/d-series+wall.html

http://www.lithonia.com/Micro_Webs/NightTimeFriendly/

http://www.designlights.org

http://www.lightingfacts.com/default.aspx?cp=content/products

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here.

LEDsDrive

Current (mA)

System Watts

Dist.

Type

30K 40K 50K AMBER

Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW

10C

(10 LEDs)

530mA 20 W

T2S 1,843 1 0 1 92 1,956 1 0 1 98 1729 1 0 1 86 1,264 0 0 1 63T2M 1,756 1 0 1 88 1,864 1 0 1 93 1,648 1 0 1 82 1,205 0 0 1 60T3S 1,822 0 0 1 91 1,934 0 0 1 97 1,710 0 0 1 86 1,250 0 0 1 63T3M 1,804 1 0 1 90 1,914 1 0 1 96 1,693 1 0 1 85 1,237 0 0 1 62T4M 1,767 1 0 1 88 1,876 1 0 1 94 1,658 0 0 1 83 1,212 0 0 1 61TFTM 1,837 0 0 1 92 1,950 0 0 1 98 1,724 0 0 1 86 1,260 0 0 1 63

ASYDF 1,642 1 0 1 82 1,743 1 0 1 87 1,541 1 0 1 77 1,127 0 0 1 56

700mA 27 W

T2S 2,272 1 0 1 84 2,409 1 0 1 89 2,421 1 0 1 90 1,544 0 0 1 57T2M 2,165 1 0 1 80 2,296 1 0 1 85 2,307 1 0 1 85 1,472 0 0 1 55T3S 2,247 1 0 1 83 2,382 1 0 1 88 2,394 1 0 1 89 1,527 0 0 1 57T3M 2,224 1 0 1 82 2,358 1 0 1 87 2,370 1 0 1 88 1,512 0 0 1 56T4M 2,179 1 0 1 81 2,310 1 0 1 86 2,322 1 0 1 86 1,481 0 0 1 55TFTM 2,265 1 0 1 84 2,401 1 0 1 89 2,413 1 0 1 89 1,539 0 0 1 57

ASYDF 2,025 1 0 1 75 2,147 1 0 1 80 2,158 1 0 1 80 1,376 1 0 1 51

1000mA 40 W

T2S 3,011 1 0 1 75 3,190 1 0 1 80 3,202 1 0 1 80 2,235 1 0 1 58T2M 2,870 1 0 1 72 3,040 1 0 1 76 3,051 1 0 1 76 2,130 1 0 2 55T3S 2,978 1 0 1 74 3,155 1 0 1 79 3,166 1 0 1 79 2,210 1 0 2 57T3M 2,948 1 0 1 74 3,123 1 0 1 78 3,134 1 0 1 78 2,187 1 0 2 56T4M 2,888 1 0 1 72 3,059 1 0 1 76 3,071 1 0 1 77 2,143 1 0 2 55TFTM 3,002 1 0 1 75 3,180 1 0 1 80 3,192 1 0 1 80 2,228 1 0 2 57

ASYDF 2,684 1 0 1 67 2,843 1 0 1 71 2,854 1 0 1 71 1,991 1 0 2 51

20C

(20 LEDs)

530mA 36 W

T2S 3,649 1 0 1 101 3,876 1 0 1 108 3,429 1 0 1 95 2,504 1 0 1 70T2M 3,478 1 0 1 97 3,694 1 0 1 103 3,267 1 0 1 91 2,387 1 0 1 66T3S 3,609 1 0 1 100 3,833 1 0 1 106 3,390 1 0 1 94 2,477 1 0 1 69T3M 3,572 1 0 1 99 3,794 1 0 1 105 3,356 1 0 1 93 2,451 1 0 2 68T4M 3,500 1 0 2 97 3,717 1 0 2 103 3,288 1 0 1 91 2,402 1 0 1 67TFTM 3,638 1 0 1 101 3,864 1 0 1 107 3,418 1 0 1 95 2,496 1 0 1 69

ASYDF 3,252 1 0 2 90 3,454 1 0 2 96 3,056 1 0 2 85 2,232 1 0 1 62

700mA 47 W

T2S 4,502 1 0 1 96 4,776 1 0 1 102 4,794 1 0 1 102 3,065 1 0 1 65T2M 4,290 1 0 1 91 4,552 1 0 1 97 4,569 1 0 1 97 2,921 1 0 1 62T3S 4,452 1 0 1 95 4,723 1 0 2 100 4,741 1 0 2 101 3,031 1 0 1 64T3M 4,407 1 0 2 94 4,675 1 0 2 99 4,693 1 0 2 100 3,000 1 0 1 64T4M 4,318 1 0 2 92 4,581 1 0 2 97 4,598 1 0 2 98 2,939 1 0 1 63TFTM 4,488 1 0 2 95 4,761 1 0 2 101 4,779 1 0 2 102 3,055 1 0 1 65

ASYDF 4,012 1 0 2 85 4,257 1 0 2 91 4,273 1 0 2 91 2,732 1 0 1 58

1000mA 74 W

T2S 5,963 1 0 1 80 6,327 1 0 1 84 6,351 1 0 1 85 4,429 1 0 1 61T2M 5,683 1 0 2 76 6,029 1 0 2 80 6,052 1 0 2 81 4,221 1 0 2 58T3S 5,896 1 0 2 79 6,256 1 0 2 83 6,280 1 0 2 84 4,380 1 0 2 60T3M 5,837 1 0 2 78 6,193 1 0 2 83 6,216 1 0 2 83 4,335 1 0 2 59T4M 5,719 1 0 2 76 6,067 1 0 2 81 6,090 1 0 2 81 4,248 1 0 2 58TFTM 5,944 1 0 2 79 6,307 1 0 2 84 6,330 1 0 2 84 4,415 1 0 2 60

ASYDF 5,314 1 0 2 71 5,638 2 0 2 75 5,660 2 0 2 75 3,947 1 0 2 54

Performance Data


DSXW1-LED

Rev. 4/14/15

Lumen Output

FIXTURE TYPE S8



Performance Data


DSXW1-LED

Rev. 4/14/15

Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F).

Lumen Ambient Temperature (LAT) Multipliers

Ambient Lumen Multiplier0°C 32°F 1.02

10°C 50°F 1.01

20°C 68°F 1.00

25°C 77°F 1.00

30°C 86°F 1.00

40°C 104°F 0.98

Projected LED Lumen MaintenanceData references the extrapolated performance projections for the DSXW1 LED 20C 1000 platform in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11).

To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory.

Operating Hours 0 25,000 50,000 100,000

Lumen Maintenance Factor 1.0 0.95 0.93 0.88

FEATURES & SPECIFICATIONS INTENDED USE

The energy savings, long life and easy-to-install design of the D-Series Wall Size 1 make it the smart choice for building-mounted doorway and pathway illumination for nearly any facility.

CONSTRUCTION Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance. The LED driver is mounted to the door to thermally isolate it from the light engines for low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65).

FINISH Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in textured and non-textured finishes.

OPTICS Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored specifically to building mounted applications. Light engines are available in 3000 K (80 min. CRI), 4000 K (70 min. CRI) or 5000 K (70 CRI) configurations.

ELECTRICAL Light engine(s) consist of 10 high-efficacy LEDs mounted to a metal-core circuit board to maximize heat dissipation and promote long life (L88/100,000 hrs at 25°C). Class 1 electronic drivers have a

power factor >90%, THD <20%, and a minimum 2.5KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C Low (per ANSI/IEEE C62.41.2).

INSTALLATION Included universal mounting bracket attaches securely to any 4” round or square outlet box for quick and easy installation. Luminaire has a slotted gasket wireway and attaches to the mounting bracket via corrosion-resistant screws.

LISTINGS CSA certified to U.S. and Canadian standards. Rated for -40°C minimum ambient.

DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.

WARRANTY Five year limited warranty. Full warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.

Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C.Specifications subject to change without notice.

Electrical LoadCurrent (A)

LEDs Drive Current (mA)

System Watts 120V 208V 240V 277V 347V 480V

10C

350 14 W 0.13 0.07 0.06 0.06 - -

530 20 W 0.19 0.11 0.09 0.08 - -

700 27 W 0.25 0.14 0.13 0.11 - - 1000 40 W 0.37 0.21 0.19 0.16 - -

20C

350 25 W 0.23 0.13 0.12 0.10 - -

530 36 W 0.33 0.19 0.17 0.14 - -

700 47 W 0.44 0.25 0.22 0.19 0.15 0.111000 75 W 0.69 0.40 0.35 0.30 0.23 0.17

To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Wall Size 1 homepage. Photometric Diagrams

Isofootcandle plots for the DSXW1 LED 20C 1000 40K. Distances are in units of mounting height (15’).Distribution overlay comparison to 250W metal halide.

LEGEND

DSXW1,0.5 fc

TWF2,0.5 fc

10’ W Sidewalk

LLDs:

TWF2 = 0.72

DSXW1 = 0.95

Test

No

. 226

01P2

2 te

sted

in a

cco

rdan

ce w

ith

IESN

A L

M-7

9-08

.

4

3

2

1

0

-4

-3

-2

-1

4 3 2 1 0 4321

Test

No

. 226

02P2

2 te

sted

in a

cco

rdan

ce w

ith

IESN

A L

M-7

9-08

.

4

3

2

1

0

-4

-3

-2

-1

4 3 2 1 0 4321

T3M

LEGEND

0.1 fc

0.5 fc

1.0 fc

DSXW1 LED 20C 40K 1000 T3M,TWF2 250M Pulse, 15’ Mounting Ht

TWF2:291W

DSXW1:75W

Test

No

. 225

97P2

2 te

sted

in a

cco

rdan

ce w

ith

IESN

A L

M-7

9-08

.

4

3

2

1

0

-4

-3

-2

-1

4 3 2 1 0 4321

T3ST2M

Options and Accessories

T3M (left), ASYDF (right) lenses HS - House-side shields BSW - Bird-deterrent spikes WG - Wire guard VG - Vandal guard

DDL - Diffused drop lens

FIXTURE TYPE S8



http://www.lithonia.com/commercial/d-series+wall.html



Portfolio

SPECIFICATION FEATURES

Lower Shielding ReflectorSelf-flanged, spun 0.062" thick aluminum lower reflector in combination with a lensed upper optical chamber provides superior lumen output with minimal source brightness. Available in all Portfolio Alzak® finishes.

Trim RetentionLower reflector is retained with two torsion springs holding the flange tightly to the cylinder.

HousingRound seamless .060” thick spun aluminum housing available in white, bronze, silver or matte black.

MountingMounting canopy installs to ceiling mounted junction box. LEDLED system contains a plurality of high brightness white LED’s combined with a high reflectance upper reflector and transitional lens producing even distribution with no pixilation. Designed for 50,000 hours at 70% lumen maintenance. Auto resetting, thermally protected. Color variation within 3-step MacAdam ellipses. Available in 80 or 90 CRI.

DriverCombination 0-10V trailing edge driver provides flicker free

dimming from 100% to 10%. Optional 1% 0-10V, DMX, Fifth Light or Lutron® Ecosystem.

Code ComplianceSurface mount cULus listed for protected wet locations with covered ceiling. Pendant mount cULus listed for damp location. EMI/RFI emissions per FCC 47CFR Part 18 Class B consumer limits. RoHS Compliant. Photometric testing completed in accordance with IES LM 79 standards. LED life testing completed in accordance with LM 80 standards.

Warranty5 year warranty.

Round surface cylinder mount in choice of white, matte black, bronze or silver finish can be used to blend with or accent varying architectural styles. Two-stage reflector system produces smooth distribution with excellent light control and low aperture brightness. Available in 80 or 90 CRI. 1000-9000 lumens with color temperatures of 2700K, 3000K, 3500K, 4000K. Suitable for commercial construction and exceeds high efficacy requirements (with designated trims) for IECC-2009. Pendant kits allow unit to be stem hung on ceilings with up to 45° slope.

DESCRIPTION

LSR8A ER8

8L

1,000-9,000 Lumen LED STEPREPEAT>

8-Inch Ceiling Mount

Cylinder Downlight

17-3/8"[442mm]

16-1/2"[420mm]

16"[406mm]

9-3/8"[237mm]

7-3/8"[187mm]

8-1/16"[205mm]

ADP1304152015-07-28 08:40:29

Catalog # Type

Date

Project

Comments

Prepared by

Refer to ENERGY STAR® Qualified Products List.

FIXTURE TYPE S9A & S9B



ENERGY DATA

Sound Rating: Class A standards

(Values at non-dimming line voltage)

Minimum Starting Temperature: -20°C (-4°F)

EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)

Power Factor: >0.90

1000 Lumen D010TE

120V Input Power: 15W 277V Input Power: 16W

120V Input Current: 0.13A 277V Input Current: 0.06A

THDi 120V: <13% THDi 277V: <20%

Maximum Non-IC Ambient Continuous

Input Frequency: 50-60Hz

1500 Lumen D010TE



THDi 120V: <13% THDi 277V: <20%



2000 Lumen D010TE



THDi 120V: <13% THDi 277V: <20%



3000 Lumen D010TE

Input Power: 40W THD: <17%

120V Input Current: .32A 277V Input Current: .16A



4000 Lumen D010TE





ENERGY DATA

Sound Rating: Class A standards

(Values at non-dimming line voltage)

Minimum Starting Temperature: -20°C (-4°F)

EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)

Power Factor: >0.90

5000 Lumen D010TE





6000 Lumen D010TE





6500 Lumen D010





8000 Lumen D010TE



THDi 120V: <13% THDi 277V: <20%



9000 Lumen D010TE



THDi 120V: <13% THDi 277V: <20%



ENERGY DATA

LSR8A ER8 8L

EXAMPLE: LSR8A40DE010P ER8A40835 8LW0LI=8” LED Wide Beam Reflector Lens, 40 00 Lumen, 3,500 K Color with Universal 120 - 277V, 0 - 10 Driver

Housing Lumens Driver 3 F in ish Power Module Lumens CRI Color

LSR8A=Surface Mount Cylinder

10=1000 Lumens15=1500 Lumens20=2000 Lumens30=3000 Lumens40=4000 Lumens50=5000 Lumens60=6000 Lumens65=6500 Lumens80=8000 Lumens90=9000 Lumens

P=WhiteMB=Matte BlackSL=Painted SilverBZ=Bronze

ER8A=8" Module 10=1000 Lumens15=1500 Lumens20=2000 Lumens30=3000 Lumens40=4000 Lumens50=5000 Lumens60=6000 Lumens65=6500 Lumens80=8000 Lumens 90=9000 Lumens

8=80 CRI9=90 CRI

27=2700° K30=3000° K35=3500° K40=4000° K

Reflector F in ish Accessories

8LN0=8" Narrow Reflector8LM0=8" Medium Reflector8LW0=8" Wide Reflector

LI=Specular ClearH=Semi-Specular ClearWMH= Warm HazeG=Specular GoldWH=WheatWHH=Wheat HazeGP=GraphiteGPH=Graphite HazeB=Specular BlackW=Gloss White

8LM0 OnlyBB=Black BaffleWB=WhiteBaffle

Pendant KitP836P=Pendant Kit, White, 36"P836BZ=Pendant Kit, Bronze, 36"P836MB=Pendant Kit, Matte Black, 36"P836SL=Pendant Kit, Painted Silver, 36"

Type3C=3 Conductor for use with 120 or 277VBlank=5 Conductor for use with 0-10V Driver6C=6 Conductor for use with DL3 3-Wire5C=5 Conductor for use with D5LT DriversDMX=No Conductors for use with DMXDriver 2

Aircraft CableAC120P=120" Aircraft Cable- WhiteAC48P=48" Aircraft Cable- WhiteAC120MB=120" Aircraft Cable- BlackAC48MB=48" Aircraft Cable- Black

1. 30ºC maximum ambient temperature2. Not available with aircraft cable3. 1000-2000 lumen uses 1 driver. 3000-9000 lumen uses 2 drivers.4. Trailing edge and leading edge 120V only

Example: AC48P 48"cable with white cord for use with 0-10V driver

1000, 1500, 2000, 3000, 4000, 5000, 6000 8000 and 9000 LUMEND010TE=0-10V 10% Dimming or Trailing Edge Dimming 4 1000, 1500, 2000, 3000, 4000, 5000, 6000 and 8000 LUMEND5LT=Fifth Light DALI 0% Dimming 1

DMX=DMX 0% Dimming Driver 1

DE010=0-10V 1% Dimming 1

1000, 1500, 2000, 3000, 4000, 5000 and 6000 LUMENDL3=1% Lutron® Hi-Lume 3-Wire or EcosystemD010TR=0-10V 10% dimming or Leading Edge 1, 46500 LUMEND010=0-10V 10% DimmingDE010=0-10V 1% Dimming1000, 1500, 2000 and 3000 LUMENDLT=Hi-Lume Forward Phase 2-Wire 120V Dimming

ORDERING INFORMATION

ADP1304152015-07-28 08:40:29




ADP1304152015-07-28 08:40:29

LSR8A ER8 8L

Test Number P112279

Element LSR8A50D010TE ER8A50835 8LM0LI

Lumens 4806 Lm

Efficacy 80.1 Lm/W

CCT 3500K

SC 0.8

Test Number P112407

Element LSR8A50D010TE ER8A50835 8LN0LI

Lumens 4457 Lm

Efficacy 74.3 Lm/W

CCT 3500K

SC 0.6

ZONAL LUMEN SUMMARY

Zone Lumens %Fixture

0-30 3485 72

0-40 4495 93

0-60 4796 100

0-90 4806 100

90-180 0 0

0-180 4806 100

ZONAL LUMEN SUMMARY


0-30 3666 82

0-40 4301 96

0-60 4423 99

0-90 4457 100

90-180 0 0

0-180 4457 100

LUMINANCE

Average Candella Degrees

Average 0° Luminance

45 13339

55 1376

65 0

75 161

85 0

LUMINANCE



45 4995

55 507

65 787

75 0

85 4291

CANDELA TABLE

DegreesVertical

Candela

0 6241

5 6365

15 5155

25 3378

35 1532

45 306

55 26

65 0

75 1

85 0

90 0

CANDELA TABLE

DegreesVertical

Candela

0 9752

5 9431

15 5465

25 2847

35 1012

45 115

55 9

65 11

75 0

85 12

90 0

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 40 10

15' 28 12

20' 16 16

24' 11 19

28' 8 22

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 62 6

15' 43 8

20' 24 11

24' 17 13

28' 12 15

CANDLEPOWER DISTRIBUTION

Downlight

3500

700

10500 15º 30º

45º

60º

75º

90º


Downlight

2500

5000

7500 15º 30º

45º

60º

75º

90º

PHOTOMETRICS


Downlight

1050

2100

3150

Test Number P113175

Element LSR8A50D010TE ER8A50835 8LN0H

Lumens 3982 Lm

Efficacy 71.1 Lm/W

CCT 3500K

SC 0.81

ZONAL LUMEN SUMMARY


0-30 2945 74

0-40 3705 93

0-60 3961 99

0-90 3982 100

90-180 0 0

0-180 3982 100

LUMINANCE



45 10636

55 2535

65 1082

75 482

85 477

CANDELA TABLE

DegreesVertical

Candela

0 5461

5 5374

15 4196

25 2823

35 1203

45 244

55 47

65 15

75 4

85 1

90 0

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 35 9

15' 24 11

20' 13 15

24' 9 18

28' 7 21

Test Number P110103

Element LSR8A50D010TE ER8A50835 8LW0LI

Lumens 4923 Lm

Efficacy 87.9 Lm/W

CCT 3500K

SC 1.2

ZONAL LUMEN SUMMARY


0-30 2654 54

0-40 4016 81

0-60 4893 99

0-90 4923 100

90-180 0 0

0-180 4923 100

LUMINANCE



45 40840

55 10577

65 1278

75 161

85 0

CANDELA TABLE

DegreesVertical

Candela

0 3200

5 3288

15 3542

25 3291

35 2196

45 936

55 197

65 18

75 1

85 0

90 0

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 21 15

15' 14 18

20' 8 24

24' 5 29

28' 4 34

Test Number P109975

Element LSR8A50D010TE ER8A50835 8LW0H

Lumens 4639 Lm

Efficacy 82.8 Lm/W

CCT 3500K

SC 1.2

ZONAL LUMEN SUMMARY


0-30 2654 54

0-40 4016 81

0-60 4893 99

0-90 4923 100

90-180 0 0

0-180 4923 100

LUMINANCE



45 40840

55 10577

65 1278

75 161

85 0

CANDELA TABLE

DegreesVertical

Candela

0 3200

5 3288

15 3542

25 3291

35 2196

45 936

55 197

65 18

75 1

85 0

90 0

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 21 15

15' 14 18

20' 8 24

24' 5 29

28' 4 34

Test Number P112535

Element LSR8A50D010TE ER8A50835 8LM0H

Lumens 4320 Lm

Efficacy 77.1 Lm/W

CCT 3500K

SC 0.93

ZONAL LUMEN SUMMARY


0-30 2796 64

0-40 3812 88

0-60 4288 99

0-90 4320 100

90-180 0 0

0-180 4320 100

LUMINANCE



45 19450

55 5723

65 1868

75 482

85 0

CANDELA TABLE

DegreesVertical

Candela

0 4522

5 4439

15 3687

25 2977

35 1641

45 446

55 106

65 26

75 4

85 0

90 0

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 29 11

15' 20 13

20' 11 18

24' 8 22

28' 6 25

Note: Beam diameter is 50% of max foot candles rounded to the nearest half foot.


Downlight

1150

2300

3450 15º 30º

45º

60º

75º

90º


Downlight

1550

3100

4650 15º 30º

45º

60º

75º

90º


Downlight

1850

3700

5550 15º 30º

45º

60º

75º

90º

15º 30º

45º

60º

75º

90º





Downlight

1050

2100

3150

Test Number P113175

Element LSR8A50D010TE ER8A50835 8LN0H

Lumens 3982 Lm

Efficacy 71.1 Lm/W

CCT 3500K

SC 0.81

ZONAL LUMEN SUMMARY


0-30 2945 74

0-40 3705 93

0-60 3961 99

0-90 3982 100

90-180 0 0

0-180 3982 100

LUMINANCE



45 10636

55 2535

65 1082

75 482

85 477

CANDELA TABLE

DegreesVertical

Candela

0 5461

5 5374

15 4196

25 2823

35 1203

45 244

55 47

65 15

75 4

85 1

90 0

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 35 9

15' 24 11

20' 13 15

24' 9 18

28' 7 21

Test Number P110103

Element LSR8A50D010TE ER8A50835 8LW0LI

Lumens 4923 Lm

Efficacy 87.9 Lm/W

CCT 3500K

SC 1.2

ZONAL LUMEN SUMMARY


0-30 2654 54

0-40 4016 81

0-60 4893 99

0-90 4923 100

90-180 0 0

0-180 4923 100

LUMINANCE



45 40840

55 10577

65 1278

75 161

85 0

CANDELA TABLE

DegreesVertical

Candela

0 3200

5 3288

15 3542

25 3291

35 2196

45 936

55 197

65 18

75 1

85 0

90 0

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 21 15

15' 14 18

20' 8 24

24' 5 29

28' 4 34

Test Number P109975

Element LSR8A50D010TE ER8A50835 8LW0H

Lumens 4639 Lm

Efficacy 82.8 Lm/W

CCT 3500K

SC 1.2

ZONAL LUMEN SUMMARY


0-30 2654 54

0-40 4016 81

0-60 4893 99

0-90 4923 100

90-180 0 0

0-180 4923 100

LUMINANCE



45 40840

55 10577

65 1278

75 161

85 0

CANDELA TABLE

DegreesVertical

Candela

0 3200

5 3288

15 3542

25 3291

35 2196

45 936

55 197

65 18

75 1

85 0

90 0

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 21 15

15' 14 18

20' 8 24

24' 5 29

28' 4 34

Test Number P112535

Element LSR8A50D010TE ER8A50835 8LM0H

Lumens 4320 Lm

Efficacy 77.1 Lm/W

CCT 3500K

SC 0.93

ZONAL LUMEN SUMMARY


0-30 2796 64

0-40 3812 88

0-60 4288 99

0-90 4320 100

90-180 0 0

0-180 4320 100

LUMINANCE



45 19450

55 5723

65 1868

75 482

85 0

CANDELA TABLE

DegreesVertical

Candela

0 4522

5 4439

15 3687

25 2977

35 1641

45 446

55 106

65 26

75 4

85 0

90 0

CONE OF LIGHT

Distance Fixture to

Lighted Plane

Initial Footcandles

at Nadir

Beam Diameter

12.5' 29 11

15' 20 13

20' 11 18

24' 8 22

28' 6 25

Note: Beam diameter is 50% of max foot candles rounded to the nearest half foot.


Downlight

1150

2300

3450 15º 30º

45º

60º

75º

90º


Downlight

1550

3100

4650 15º 30º

45º

60º

75º

90º


Downlight

1850

3700

5550 15º 30º

45º

60º

75º

90º

15º 30º

45º

60º

75º

90º

PHOTOMETRICS

ADP1304152015-07-28 08:40:29

LSR8A ER8 8L

LUMENS EM MULTIPLIER

7 14

1000 0.47 0.93

1500 0.30 0.61

2000 0.30 0.61

3000 0.17 0.33

4000 0.12 0.24

5000 0.11 0.23

6000 0.09 0.18

6500 0.17

8000 0.15

9000 0.13

10000 0.11

120000 0.09

EM MULTIPLIER DATA


page 1 of 4 www.luminii.com tel: 224-333-6033REV8.0

Kendo M Wet Linear illumination system

Technical information

Finish options

Black powder coated

Bronze powder coated

Silver anodized

White powder coated

dimmable

Made in USA

KMWMODEL

Ordering code

30K30K - 3000K35K - 3500K41K - 4100K

1212”- 116”4” increments

F1F1 - 72” wire leadsF2 - 72” wire leads at one end and quick connect at otherF3 - Single quick connectF4 - Dual quick connect

KMW - Kendo M WetSO

SO - StandardMO - MediumHO - HighVHO - Very-High

CC - Clear F - Frosted M - MediumDF - Dot free*

AA - AdjustableF - Fixed

SALENGTH POWER FEEDOUTPUTCCT LENS MOUNTING FINISH

SA - Silver BK - Black BZ - Bronze WH - White(BK,BZ,WH finishes will have an upcharge and require longer lead times)

IP67

*Available with only HO & VHO outputs

Extruded aluminum linear illumination system, Kendo M Wet is available in sections up to 116”. Specifically designed LED engine provides constant illumination levels from the beginning to the end of the runs. Kendo M Wet is suitable for cove lighting, architectural accents, under or above cabinets, display cases, and many other applications. Class 2 listed for wet location installations.

90˚90˚

0.82”

0.93”

0.70”

with medium lens

with clear, frosted, and dot free linear lens

with fixed mounting clips and linear lens

0.70”0.63”0.67”

0.70” 0.73”

Adjustable mounting bracket allows 90˚ tilt in both directions.

0.94”

CCT / LUMEN MULTIPLIER

Color temperature

Multiplier(Multiple Light Output of

3000K HO)

3000 K 1.00

3500 K 1.15

4100 K 1.19

Output Options

Output type SO(LL18)

MO(LL30)

HO(LL36)

VHO(LL72)

Lumens at 3000K(Frosted lens) 40 lum/ft 71 lum/ft 79 lum/ft 154 lum/ft

Average power consumption at 4’ 1.6 W/ft 2.7 W/ft 3.2 W/ft 6.5 W/ft

Maximum system length 80’ 40’ 35’ 18’

CRI 90+ 90+ 90+ 90+

Operating Voltage 24VDC 24VDC 24VDC 24VDC

TYPE S10A & S10B



Photometry

C0/180C90/270

UNIT: CD

Zone

0-30

0-40

0-60

0-90

0-180

Lumen

308

% Fixture

35%

53%

82%

99%

100%

466

721

868

881Total

Zonal Lumen Summery 4100K

KMW-48-41K-VHO-C-XX

60

90

120

150

0

30

60

90

120

150

-30

-60

-90

-120

-150

30

0

89

178

267

356

445

C0/180C90/270

UNIT: CD

Zone

0-30

0-40

0-60

0-90

0-180

Lumen

284

% Fixture

35%

53%

82%

98%

100%

430

662

793

812Total


KMW-48-41K-VHO-M-XX

60

90

120

150

0

30

60

90

120

150

-30

-60

-90

-120

-150

30

0

83

165

248

331

413

C0/180C90/270

UNIT: CD

Zone

0-30

0-40

0-60

0-90

0-180

Lumen

214

% Fixture

29%

46%

78%

99%

100%

342

577

726

737Total


KMW-48-41K-VHO-F-XX

60

90

120

150

0

30

60

90

120

150

-30

-60

-90

-120

-150

30

0

57

115

172

230

287

C0/180C90/270

UNIT: CD

Zone

0-30

0-40

0-60

0-90

0-180

Lumen

161

% Fixture

27

44%

77%

99%

100%

262

459

591

599Total


KMW-48-30K-VHO-DP-XX

60

90

120

150

0

30

60

90

120

150

-30

-60

-90

-120

-150

30

0

42

83

125

166

208

CCT / LUMEN MULTIPLIER LENS TYPE / LUMEN MULTIPLIER

Color temperature


3000K HO)

3000 K 1.00

3500 K 1.15

4100 K 1.19

LensType


3000K HO)

Clear 1.20

Frosted 1.00

Medium 1.10

Dot free 0.81



Power consumption per fixture lengthBased on operation with PSD series of power supplies.

actu

al le

ngth

of a

ssem

bled

fixt

ure

SO MO HO VHONominal length

Actual length W/ft Total

wattage Actual length W/ft Total wattage

Actual length W/ft Total

wattageActual length W/ft Total

wattage

12” 12-12/16'' 1.65 1.65 10-13/16'' 2.70 2.70 12-12/16'' 3.25 3.25 12-9/16'' 6.75 6.75

16” 16-8/16'' 1.65 2.00 15-6/16'' 2.70 3.60 16-8/16'' 3.25 4.00 16-9/16'' 6.75 9.00

20” 20-8/16'' 1.65 2.80 21-9/16'' 2.70 4.50 20-8/16'' 3.25 5.25 20-7/16'' 6.75 11.25

24” 24-7/16'' 1.65 3.00 25-8/16'' 2.70 5.40 24-7/16'' 3.25 6.50 24-6/16'' 6.75 13.50

28” 28-6/16'' 1.65 3.90 27-15/16'' 2.70 6.30 28-6/16'' 3.25 7.75 28-5/16'' 6.75 16.75

32” 32-5/16'' 1.65 4.00 32-13/16'' 2.70 7.20 32-5/16'' 3.25 8.50 32-4/16'' 6.75 19.00

36” 36-4/16'' 1.65 5.00 35-5/16'' 2.70 8.10 36-4/16'' 3.25 9.75 36-4/16'' 6.65 19.95

40” 40-3/16'' 1.64 5.50 40-4/16'' 2.65 8.90 40-3/16'' 3.25 10.25 40-2/16'' 6.65 22.20

44” 44-1/16'' 1.64 6.00 45-3/16'' 2.65 9.70 44-1/16'' 3.20 11.75 44-1/16'' 6.65 24.40

48” 48-1/16'' 1.63 6.60 47-10/16'' 2.65 10.60 48-1/16'' 3.20 12.80 48 '' 6.55 26.20

52” 52 '' 1.63 7.10 53-9/16'' 2.65 11.40 52 '' 3.20 13.30 51-15/16'' 6.55 28.50

56” 55-15/16'' 1.63 7.70 55 '' 2.65 12.20 55-15/16'' 3.20 14.80 55-14/16'' 6.55 30.50

60” 59-14/16'' 1.63 8.20 59-15/16'' 2.65 13.30 59-14/16'' 3.20 16.00 60-13/16'' 6.45 32.25

64” 63-13/16'' 1.63 8.80 64-14/16'' 2.65 14.20 63-13/16'' 3.20 17.00 64-1/16'' 6.45 34.40

68” 67-12/16'' 1.62 9.30 67-5/16'' 2.65 15.10 67-12/16'' 3.15 18.00 67-11/16'' 6.45 36.55

72” 71-11/16'' 1.62 9.80 72-4/16'' 2.65 15.90 71-11/16'' 3.15 18.90 72-10/16'' 6.40 38.40

76” 75-10/16'' 1.62 10.40 74-11/16'' 2.60 16.70 75-10/16'' 3.15 19.00 76-9/16'' 6.40 40.50

80” 79-9/16'' 1.62 10.90 79-10/16'' 2.60 17.50 79-9/16'' 3.15 21.50 80-7/16'' 6.40 43.00

84” 83-8/16'' 1.62 11.50 84-9/16'' 2.60 18.20 83-8/16'' 3.15 22.05 84-6/16'' 6.25 43.75

88” 87-7/16'' 1.62 12.00 87 '' 2.60 19.10 87-7/16'' 3.15 23.00 88-5/16'' 6.25 46.00

92” 91-6/16'' 1.62 12.50 91-15/16'' 2.60 20.00 91-6/16'' 3.10 24.00 92-4/16'' 6.25 48.00

96” 95-6/16'' 1.62 13.10 96-13/16'' 2.60 20.80 95-6/16'' 3.10 24.80 96-4/16'' 6.15 49.20

100” 99-4/16'' 1.61 13.50 101-8/16'' 2.60 21.70 99-4/16'' 3.10 26.30 100-3/16'' 6.15 51.25

104” 103-2/16'' 1.61 14.00 104-4/16'' 2.60 22.50 103-2/16'' 3.05 27.10 103-2/16'' 6.15 53.00

108” 107-1/16'' 1.60 14.50 109-3/16'' 2.60 23.40 107-1/16'' 3.05 28.00 108-1/16'' 6.00 54.00

112” 111-1/16'' 1.60 15.00 111-10/16'' 2.60 24.10 111-1/16'' 3.05 28.50 112 '' 6.00 56.00

116” 115 '' 1.60 15.50 116-9/16'' 2.60 24.80 115 '' 3.05 30.00 115-15/16'' 6.00 58.00

Power supplySee fixture and power supply instructions & spec sheet for wiring information. Dimming possible in select models - view Luminii website for list of compatible dimmers.

48 - 48 W96 - 96 W288 - 288 W (3x 96W)

24 - 24 VDC Blank - 120 V240 - 240 V277 - 277 V

40

48 24

POWER

POWER

PSV

PSD

LTEA4U1UKL-CV240 L3DA4U1UKL-CV240

PSV - PSV Series

PSD - PSD Series

Lutron - Hi-Lume A-series LTE Lutron - Hi-Lume A-series L3D

MODEL

MODEL

MODEL MODEL

40 - 40 W60 - 60 W96 - 96 W

24VOUTPUT

OUTPUT INPUT

24 - 24 VDC

U2DIM DDIMMING LOCATION

U2DIM - Dimming 1-10VU2ND - Non Dimming

D - Dry LocationIP65 - Wet Location



Connectors

-F4

-F3

-F2

-F1

Powerfeed options with fixed bracket

Sample layout of powerfeed connections

24 VDC power supply

F2 F3

F4 F3

F3

Powerfeed options with adjustable bracket

72”

72”18”

18”

18”

18”

Male quick connect end#WETCON-M

Female quick connect end#WETCON-F

Lead wires end

A B C

C

C

A

A B

B

-F4

-F3

-F2

-F1

A

A

C

C

A

A B

B

Maximum System Length

Linking and Extension Cable

A B

12”

Female/male Joiner 12” - Part # IP67-12

Female/male Joiner 48” - Part # IP67-48

A B

48”

0.39”0.53” 0.45”

SURFACE W W W . L U M E N W E R X . C O M

File Name: VIAWET.SURFACE.SPEC August 16, 2015Page: 1 / 4

www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC. LumenWerx ULC. reserves the right to change or modify product specifications without notification

VIA WET LED

ORDER GUIDE

VIAWETS LED

LUMINAIRE ID OPTICS LIGHT SOURCE CRI LUMEN PACKAGES COLOR TEMP.

VIAWETS -via wet

surface

TMG - Tempered Clear Glass

PYC - Clear Polycarbonated

+HLO - High-Efficiency Lambertian Optic

+PMO - Precision Micro-Prism Optic

LED - high performance LED 80 - 80CRI

90 - 90CRI (consult factory)

500 - low output 500lm/ft

750 - med. output 750lm/ft

1000 - high output 1000lm/ft

30 - 3000k

35 - 3500k

40 - 4000k

50 - 5000k

LUMINAIRE LENGTH VOLTAGE DRIVER ELECTRICAL POWER FEED FINISH

Standard sections - 3', 4'

For all other specify length

#FT - nominal length in feet

Continuous Run - 4' sections joint together

120 - 120V

277 - 277V

UNV - 120V-277V

347 - 347V

D - dimming 0-10V 1 - 1 circuit

+#EM - emergency light circuit

+#NL - night light circuit

+GTD - generator transfer device

EF - end feed W - matte white

AL - aluminum

CF# - custom finish specify RAL#

See page 2 for ordering code detailed information

PROJECT:

TYPE:

NOTES:

33

3

DESCRIPTIONVia Wet offers architectural lighting

for wet locations in both exterior and

interior applications. With a simple

3¾" high by 4½" wide profile of

extruded aluminum, Via Wet can be

installed in recessed, ceiling, wall, or

pendant mounting.

Fully sealed, Via Wet is suitable for extreme

weather condition, -20ºC/-4ºF to 40ºC/104ºF.

A choice of output options provides up to 1000

lumens per four-foot section.

OPTICS

TMG +HLO - Tempered Clear Glass

with High Efficiency Lambertian Optic

CROSS SECTION

4 1/2"

3 3/4"

VIAWETS

TYPE S12A




VIA WET LED

OPTICSVia Wet is available with a clear tempered glass (TMG) or a clear, UV stabilized

polycarbonate (PYC) protective enclosure, which are installed outside of the

luminaire optic itself.

The Precision Micro Optic (PMO) option utilizes a special catadioptric lens with a

two-dimensional array of prisms designed to eliminate glare while maintaining high

efficiency and clean luminous appearance. The High efficiency Lambertian Optic

(HLO) option uses a diffuser that combines 88% transmission with good source

obscuration.

LIGHT SOURCE - LEDCustom linear array of mid-flux LED's are cartridge-mounted with quick-connect

wiring to facilitate service and thermal management. Available in 3000K, 3500K

and 4000K with a minimum 80 CRI and an option for 90 CRI with elevated R9

value. Color consistency maintained to within 3 SDCM. LEDs operated at reduced

drive current to optimize efficacy and lumen maintenance.

All LEDs have been tested in accordance with IESNA LM-80-08 and the results

have shown L80 lumen maintenance greater than 60,000 hours. Absolute product

photometry is measured and presented in accordance with IESNA LM-79, unless

otherwise indicated.

PERFORMANCE PER 4' AT 4000K

LED output Color Temp Watts Nominal Lumens Efficacy LPW

low output 4000K 22 2000 92

medium output 4000K 33.5 3000 90

high output 4000K 45.5 4000 88

LUMINAIRE LENGTH Via Wet is made up of standard 3, and 4 foot sections that can be joined cleanly and

securely for continuous runs in all configurations.Joining system

All individual sections are joined together onsite using the ¼"-20 screws and nuts

provided. The joint between 2 adjacent individual sections is sealed by a silicone

gasket attached to one of the 2 sections. The electrical connection between

sections is made through the holes provided in the end-caps.

ELECTRICAL Factory-set adjustable output current electronic

driver with 120-277V AC line input. Dimmable

from at least 100%-5% with 0-10V control. Rated

life (90% survivorship) of 50,000 hours at -20ºC

min. and 40ºC max. ambient (and 70ºC max. case)

temperature. Terminal block connections for easy

service. At maximum driver load: Efficiency>84%,

PF>0.9, THD<20%.

Power grommet forcable diameter between 0.276"

and 0.512" (7-13mm).

MOUNTING OPTIONSFixtures can be mounted directly to hard surface

ceilings, hardware supplied by others.




VIA WET LED

CERTIFICATIONSETL - Rated for Wet location. Conforms to UL

Standard 1598 and certified to CAN/CSA Standard

C22.2 No. 250.0.

WARRANTYLumenWerx provides a three-year limited warranty

of electrical and mechanical performance of the

luminaires, including the LED boards, drivers, and

auxiliary electronics. LumenWerx will repair or

replace defective luminaires or components at our

discretion, provided they have been installed and

operated in accordance with our specifications.

Other limitations apply, please refer to the full

warranty on our website.

GASKETTED FIXTURE MOUNTING OPTIONS

EPDM Grommet

Frame End CapSilicone Gasket

End Cap SiliconeGasket

Silicone Outer Gasket

Inner Silicone Gasket

Lens and enclosure are sealed with inner and outer silicone gaskets

FINISHInterior - 95%, reflective matte powder coated white paint

Exterior - matte white or silver powder coating.

Custom finishes are also available.

CONSTRUCTIONHousing - Extruded Aluminum (0.095" nominal) up to 90% Recycled Content

Side frame extrusions – Extruded Aluminum (0.125" nominal) up to 90% Recycled

Content

Interior brackets - Die formed cold rolled sheet steel 16 gauge thick

Joining system - 2 x ¼"-20 screws + nuts accessible from inside the fixture + one

silicone gasket attached to one of the end-caps.

Reflectors - Flat rolled Aluminum sheet 0.040" thick precisely die formed, 95%

reflective matte white painted

End Cap - Aluminum Die Cast

Tempared Clear Glass - clear, 1/8" thickness, fully tempered optics.

Polycarbonated - clear, 1/8" thickness, UV protected optics.

Gaskets - Fixture lens unit and end-caps are fully sealed using silicone gaskets.

Power grommet - EPDM rubber rated IP67.

WEIGHTVia Wet 4ft - 18.2lbs - 8.27kg




VIA WET LED

500 LUMEN AT 80CRI - LOW OUTPUT

900

600

300

1200

1500

900

600

300

1200

1500

264

528

1056

792

PERFORMANCE PER 4'


low output 3000K 23 2000 86

low output 3500K 22.5 2000 89

low output 4000K 22 2000 92

low output 5000K 21 2000 96

750 LUMEN AT 80CRI - MEDIUM OUTPUT

900

600

300

1200

1500

900

600

300

1200

1500

396

792

1584

1188

PERFORMANCE PER 4'





medium output 5000K 32 3000 94

1000 LUMEN AT 80CRI - HIGH OUTPUT

900

600

300

1200

1500

900

600

300

1200

1500

528

1056

2112

1584

PERFORMANCE PER 4'


high output 3000K 49 4000 82

high output 3500K 47 4000 85

high output 4000K 45.5 4000 88

high output 5000K 43.5 4000 92

WALL W W W . L U M E N W E R X . C O M

File Name: VIAWET.WALL.SPEC January 8, 2016Page: 1 / 4


VIA WET LED

ORDER GUIDE

VIAWETW LED

LUMINAIRE ID OPTICS LIGHT SOURCE CRI LUMEN PACKAGES COLOR TEMP.

VIAWETW- via wet

wall

TMG - Tempered Clear Glass

PYC - Clear Polycarbonated

+HLO - High-Efficiency Lambertian Optic

+PMO - Precision Micro-Prism Optic

LED - high performance LED 80 - 80CRI

90 - 90CRI (consult factory)

500 - low output 500lm/ft

750 - med. output 750lm/ft

1000 - high output 1000lm/ft

30 - 3000k

35 - 3500k

40 - 4000k

50 - 5000k

LUMINAIRE LENGTH VOLTAGE DRIVER ELECTRICAL POWER FEED FINISH

Standard sections - 3', 4'

For all other specify length

#FT - nominal length in feet

Continuous Run - 4' sections joint together

120 - 120V

277 - 277V

UNV - 120V-277V

347 - 347V

D - dimming 0-10V 1 - 1 circuit

+#EM - emergency light circuit

+#NL - night light circuit

+GTD - generator transfer device

EF - end feed

BF - back feed

W - matte white

AL - aluminum

CF# - custom finish specify RAL#

See page 2 for ordering code detailed information

PROJECT:

TYPE:

NOTES:

33

3

DESCRIPTIONVia Wet offers architectural lighting

for wet locations in both exterior and

interior applications. With a simple

3¾" high by 4½" wide profile of

extruded aluminum, Via Wet can be

installed in recessed, ceiling, wall, or

pendant mounting.

Fully sealed, Via Wet is suitable for extreme

weather condition, -20ºC/-4ºF to 40ºC/104ºF.

A choice of output options provides up to 1000

lumens per foot section.

OPTICS

TMG +HLO - Tempered Clear Glass

with High Efficiency Lambertian Optic

CROSS SECTION

4 1/2"

3 3/4"

VIAWETW

TYPE S12B




VIA WET LED

OPTICSVia Wet is available with a clear tempered glass (TMG) or a clear, UV stabilized

polycarbonate (PYC) protective enclosure, which are installed outside of the

luminaire optic itself.

The Precision Micro Optic (PMO) option utilizes a special catadioptric lens with a

two-dimensional array of prisms designed to eliminate glare while maintaining high

efficiency and clean luminous appearance. The High efficiency Lambertian Optic

(HLO) option uses a diffuser that combines 88% transmission with good source

obscuration.

LIGHT SOURCE - LEDCustom linear array of mid-flux LED's are cartridge-mounted with quick-connect

wiring to facilitate service and thermal management. Available in 3000K, 3500K

and 4000K with a minimum 80 CRI and an option for 90 CRI with elevated R9

value. Color consistency maintained to within 3 SDCM. LEDs operated at reduced

drive current to optimize efficacy and lumen maintenance.

All LEDs have been tested in accordance with IESNA LM-80-08 and the results

have shown L80 lumen maintenance greater than 60,000 hours. Absolute product

photometry is measured and presented in accordance with IESNA LM-79, unless

otherwise indicated.

PERFORMANCE PER 4' AT 4000K

LED output Color Temp Watts Nominal Delivered Lumens

Efficacy LPW

low output 4000K 22 2000 92


high output 4000K 45.5 4000 88

LUMINAIRE LENGTH Via Wet is made up of standard 3, and 4 foot sections that can be joined cleanly and

securely for continuous runs in all configurations.Joining system

All individual sections are joined together onsite using the ¼"-20 screws and nuts

provided. The joint between 2 adjacent individual sections is sealed by a silicone

gasket attached to one of the 2 sections. The electrical connection between

sections is made through the holes provided in the end-caps.

ELECTRICAL Factory-set adjustable output current electronic

driver with 120-277V AC line input. Dimmable

from at least 100%-5% with 0-10V control. Rated

life (90% survivorship) of 50,000 hours at -20ºC

min. and 40ºC max. ambient (and 70ºC max. case)

temperature. Terminal block connections for easy

service. At maximum driver load: Efficiency>84%,

PF>0.9, THD<20%.

Power grommet forcable diameter between 0.276"

and 0.512" (7-13mm).

MOUNTING OPTIONSFixtures may be horizontally mounted directly to the

wall.




VIA WET LED

CERTIFICATIONSETL - Rated for Wet location. Conforms to UL

Standard 1598 and certified to CAN/CSA Standard

C22.2 No. 250.0.

WARRANTYLumenWerx provides a three-year limited warranty

of electrical and mechanical performance of the

luminaires, including the LED boards, drivers, and

auxiliary electronics. LumenWerx will repair or

replace defective luminaires or components at our

discretion, provided they have been installed and

operated in accordance with our specifications.

Other limitations apply, please refer to the full

warranty on our website.

GASKETTED FIXTURE MOUNTING OPTIONS

EPDM Grommet

Frame End CapSilicone Gasket

End Cap SiliconeGasket

Silicone Outer Gasket

Inner Silicone Gasket

Lens and enclosure are sealed with inner and outer silicone gaskets

FINISHInterior - 95%, reflective matte powder coated white paint

Exterior - matte white or silver powder coating.

Custom finishes are also available.

CONSTRUCTIONHousing - Extruded Aluminum (0.095" nominal) up to 90% Recycled Content

Side frame extrusions – Extruded Aluminum (0.125" nominal) up to 90% Recycled

Content

Interior brackets - Die formed cold rolled sheet steel 16 gauge thick

Joining system - 2 x ¼"-20 screws + nuts accessible from inside the fixture + one

silicone gasket attached to one of the end-caps.

Reflectors - Flat rolled Aluminum sheet 0.040" thick precisely die formed, 95%

reflective matte white painted

End Cap - Aluminum Die Cast

Tempared Clear Glass - clear, 1/8" thickness, fully tempered optics.

Polycarbonated - clear, 1/8" thickness, UV protected optics.

Gaskets - Fixture lens unit and end-caps are fully sealed using silicone gaskets.

Power grommet - EPDM rubber rated IP67.

WEIGHTVia Wet 4ft - 18.2lbs - 8.27kg




VIA WET LED

500 LUMEN AT 80CRI - LOW OUTPUT

900

600

300

1200

1500

900

600

300

1200

1500

264

528

1056

792

PERFORMANCE PER 4'


Efficacy LPW

low output 3000K 23 2000 86

low output 3500K 22.5 2000 89

low output 4000K 22 2000 92

low output 5000K 21 2000 96

750 LUMEN AT 80CRI - MEDIUM OUTPUT

900

600

300

1200

1500

900

600

300

1200

1500

396

792

1584

1188

PERFORMANCE PER 4'


Efficacy LPW




medium output 5000K 32 3000 94

1000 LUMEN AT 80CRI - HIGH OUTPUT

900

600

300

1200

1500

900

600

300

1200

1500

528

1056

2112

1584

PERFORMANCE PER 4'


Efficacy LPW

high output 3000K 49 4000 82

high output 3500K 47 4000 85

high output 4000K 45.5 4000 88

high output 5000K 43.5 4000 92

One-sided light output

Lamps A B C

4417 LED.537* 17.6W LED 24 3⁄8 41⁄8 5

Housing: Constructed of die-cast aluminum end caps and an extruded, thick walled aluminum body. The end caps and body are internally welded to provide a seamless, waterproof lamp housing. The housing is secured to a mounting bracket by two stainless steel, captive fasteners. The mounting bracket is secured directly to the wall over a BEGA 537 recessed outlet box. Die castings are marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy.

Enclosure: The faceplate is constructed of extruded aluminum profiles, cut and welded together. The faceplates are secured to bottom of the lamp housing body with six flush, captive, stainless steel fasteners. The bottom diffuser is matte safety glass.

Electrical: 17.6W LED luminaire, 23 total system watts, -30°C start temperature. Integral 120V through 277V electronic LED driver, 0-10V dimming. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 3000K with an 85 CRI. Available in 4000K (85 CRI); add suffix K4 to order.


Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order


Weight: 9.9 lbs.

Luminaire Lumens: 629

Wall luminaires with one-sided light output

Type:BEGA Product:

Project:Voltage:

Color:Options:

Modified:

Wiring box*

537

These luminaires mount over a custom BEGA recessed box. This box can be shipped ahead of the luminaire.


*Small opening wiring box included.

A

B

C

TYPE S13

Date post:	12-Aug-2021
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Palo Alto | Mercedes-Benz...2016/05/09 · ISO 9001 LM79 / LM80 Compliant 3G Vibration Rated IP66...

Documents