Confidential 1
Panasonic Communications Co., Ltd.Panasonic Communications Co., Ltd.
Office Network CompanyOffice Network Company
Edition 1.3 4Edition 1.3 4thth July, 2007 July, 2007
Chapter 2General Installation
Procedure
KX-TDE100/200 KX-TDE100/200 SystemSystem(Version 1.0)(Version 1.0)
Confidential 2
Chapter 2General Installation Procedure
1. Installation Preparation1. Installation Preparation
2. Installation Procedure2. Installation Procedure
33. PC Programming Tool
Confidential 3
1. Installation Preparation (1/4)
Step1. Collect the Customers’ RequestHow many CO/Extensions does the customer need ?
IP-PT 10 Analog CO 20 Door phone 2
IP Soft Phone 10 DPT 5 Door Opener 0
SIP Extension 10 SLT 70 : :
IP-GW 1 PS 5 : :
ISDN PRI Line 0 CS 0 : :
ISDN BRI Line 2 Voice Mail 2 : :
Configuration tool(This tool is currently under development)
Confidential 4
1. Installation Preparation (2/4)
Step2. Which DSP do I require?
Configuration tool(This tool is currently under development)
Confidential 5
1. Installation Preparation (3/4)
Step3. Purchase Activation key Card from Sales Company
Dealer
Sales Company
1) Order Activation Key Card
2) Get Activation key Card
3) Pay for Activation Key Card
Confidential 6
1. Installation Preparation (4/4)
PCC Key Management System
Dealer
1) Access PCC Key Management System to get Activation Key File
Internet
2) Activation Key File
Activation Key File
Step4. Get Activation Key from PCC Key Management System
Confidential 7
2. Installation Procedure (1/2)
1. Prepare TDE100/200, DSP16/64, other Optional Expansion cards, PT,SLT… and Activation Key Files
2. Connect PC with TDE100/200 via LAN cable (using the lower of the 2 LAN ports) or RS232C cable (Default PBX IP address is 192.168.0.101, port number is 35300.)
3. Start Quick Setup using PCMC
4. Set DHCP Client Setting “Enable” or set IP address manually
5. Start PCMC with new IPCMPR IP address
Reboot
SD Card must be 128mb minimum – Smaller sized cards
will not be supported
Confidential 8
2. Installation Procedure (2/2)
6. Install Activation Key file into SD card using PCMC (Utility Menu – File Transfer PC to PBX)
8. You can use IP-PT,SIP and IP-GW feature.
7. Reboot or ‘Refresh Activation Key’ from PCMC (Utility Menu)
KX-TDE100
KX-TDE200
Activation Key File
All virtual card status must be ‘OUS’ before using ‘Refre
sh Activation Key’
Confidential 9
3. PC Programming Tool
Graphical user interface is the same as TDA100/200/600 PC Programming Tool.(Supported on Windows Vista)
Confidential 10
Thank you very much !Thank you very much !
Chapter 2General Installation Procedure
