Date post: | 21-Jun-2018 |
Category: |
Documents |
Upload: | nguyencong |
View: | 222 times |
Download: | 0 times |
MOVING COIL INSTRUMENTS FOR NONELECTRIC VALUES
Model:Y-96 Y-72
These meters can measure the other non-electric values for example,temperature,speed
and so on.
DC Voltmeter
Model:Y-96 Y-72 Y-48
Class:1.5
Specs:3V 5V 7.5V 10V 15V 20V 50V 75V 100V 120V 150V 200V 250V 300V 400V
450V 600V
Note:Over 600V should be used with Ext.Resistor.(Rated Cuuent 5mA).
AC Voltmeter
Model:Y-96 Y-72 Y-48
Class:1.5
Specs:30V 50V 75V 100V 120V 150V 250V 300V 450V 600V For 450-380KV,should be
used with potential transformer secondary voltage 100V.
AC Ammeter
Model:Y-96 Y-72 Y-48
Class:1.5
Specs:0.1A 0.5A 1A 1.5A 3A 5A 7.5A 10A 15A 20A 25A 30A 50A 75-105A(use
Ext.CT 5A)
Note:for60/75/100A direct meter,the class is 2.5.
Advantage:The scale can be easily changed without opening the front frame so
that the class will not be influenced.
Frequency Meter
Pointer Type
Model:Y-96 Y-72 Y-48
Class:1.0
Volt:50V 100V 220V 380V
Freq:44-55Hz 45-66Hz 55-65Hz 47-53Hz 57-63Hz 44-56Hz 54-66Hz 450-550Hz 550-
650Hz
Panel MeterPanel MeterPanel MeterPanel MeterPanel Meter
DC Ammeter
Model:Y-96 Y-72 Y-48
Class:1.5
Specs:25uA 50uA 1mA 2mA 5mA 10mA 20mA 30mA 50mA 75mA 100mA 150mA 200mA
250mA 300mA 500mA 1A 3A 5A 7.5A 10A 20A 30A 50A 75-105A(used with Shunt)
Feature:The scale can be easily changed without opening the front frame so that the
class will not be influenced.
www.ck-electrical.com
138Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]
Model:Y-96 Y-80 Y-72 Y-60 Y-50
Struction:Moving Coil,Moving Iron and Rectifier.
Class:2.0 2.5
Power MeterWattmeters or Varmeters with built-in converter for 1 phase,3P 3W,3P 4W.
Model:Y-96 Y-72
Class:1.5
Voltage:50V 100V 220V 240V 220/380V 240/415V
Current:5a
These meters are used with potential secondary voltage 100V voltage transformer or
secondary current 5A CT.wattmeters with built-in converter for 3P 3W,3P 4W and single
phase.
Power factorFor 3 phases circuits,balanced load 45-65Hz and for 1 phase AC 50Hz.
Model:Y-96 Y-72
Class:2.5
Voltage:100V 380V 440V
Frequency:50Hz 60Hz
Scale graduation:0.5cap-1-0.5ind 0.3cap-1-0.7ind 0.4cap-1-0.4ind 0.7cap-1-0.3ind.
Orders to be Noted:
Type of Current:1P,3P 3W circuits,balanced load.
Rated Volt:The voltage is line voltage(between two wires).
Operating Current:If used with CT,the secondary current 5A or 1A is standard.
Panel MeterPanel MeterPanel MeterPanel MeterPanel Meter
Name Specifications
DC Ammeter
DC Voltmeter
DC Ammeter
DC Voltmeter
Frequency Meter
Power Factor
Meter
Power Meter
1-1000mA
5-1000A
1-50A
1K-0KA
40-1000mA1-1000V
1K-380KV
Remarks
Only AM-80 is available
Direct connection
With EXt.Shunt
Direct connection
With EXt.Resistor
Direct connection
With EXt.CT
Direct connection
With EXt.CT
Voltage:50-380V
Frequency:45-55Hz 45-65Hz 55-65Hz
Voltage:50-380VFrequency:0.5cap-1-0.5ind 0.3cap-1-0.7ind 0.4cap-1-0.4ind 0.7cap-1-0.3indSuitable for 1Por 3P3W Circuit
Voltage:50-380V Current:0.2-5AWith Current or VoltageTransformer
30-1000uA1-1000mA
1K-10KA1-50A
40-1000mV1-1000V
1K-10KA1-50A
www.ck-electrical.com
139Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]
Digital Panel MeterDigital Panel MeterDigital Panel MeterDigital Panel MeterDigital Panel Meter
Y-96V Y-96COS Y-96AV Y-96KA
Y-72Hz Y-72v Y-96v Y-96ka
Y-72Hz Y-96Hz Y-48 � 96 Y-48 � 72
Y-150v Y-150a Y-150Hz
ApplicationsDigital panel meter which is various and artistic in appearance design is used for dual slope, high precise A/D changeover circuit
and high light LED cassette setting specification. It is very convenient for user to fix the equipment.
specifications
Description
Direct
input
range
AC 0-100V
AC 0-220V
AC 100-300V
AC & DC digitalvoltage meter
AC & DC digital Ampere meter
Frequency digital meter
AC tri-phase watt meter
AC single-phase watt meter
AC single-phase factor meter
Operation voltage
AC 220V 50/60Hz
AC 220V 50/60Hz
AC 220V 50/60Hz
AC 220V 50/60Hz
Display range
0-1999
0-1999
0-1999
0-1999
0-1999
0.5-0-0.5
Class
0.5
0.5
0.5
–
–
–
Input
current
range
–
–
–
AC 5A
AC 10-5A
AC 5A
AC 380V 50/60HzAC 110V 50/60HzAC 220V 50/60HzAC 110V 50/60Hz
www.ck-electrical.com
ACDC0-100VAC 10-20ADC 0-10A
AC 10-2KHZ(20-300V)
140Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]
DD862 Single Phase Energy MeterDD862 Single Phase Energy MeterDD862 Single Phase Energy MeterDD862 Single Phase Energy MeterDD862 Single Phase Energy Meter
DD282 Single Phase Energy MeterDD282 Single Phase Energy MeterDD282 Single Phase Energy MeterDD282 Single Phase Energy MeterDD282 Single Phase Energy Meter
DD282 single phase energy meter is induction meter which is applicable to measure the
rated frequency 50Hz and power loss in electrified wire netting. All technical targets
completely conform to IEC60521.
Application
DD282
DD862-4
Overload
Capacity
200% Ib
Type
DD282
Specifications
Dimension
Accuracy
(Class)
2.0
Insulation
AC voltage 2kV for
1 minute impluse
voltage 6kV
Starting
Current
0.5% Ib
Rated Current (A)
2(4),2.5(10),3(6),
5(10),10(20),20(40),
30(60),40(80)
Rated
Voltage (V)
220
DD862 Single Phase Energy Meter is induction meter which is appliable to measure the
rated frequency 50Hz and power loss in electrified wire netting. The meter has novel
design, rational structure and features of large overload, low power loss and long life
etc. All technical targets completely conform to IEC60521.
Application
Dimension
Specifications
Starting
Current
0.5% Ib
Accuracy
(Class)
2.0
Rated
Voltage
(V)
220
Overload
Capacity
400% Ib
200% Ib
Rated Current (A)
1.5(6),2.5(10),5(20),3(12),
10(40),15(60),20(80),30(100)
3(6),5(10),2.5(5),10(20),
20(40),30(60),40(80)
DD862-4
DD862-2
Type Insulation
AC voltage 2kV
for 1 minute
impulse
voltage 6kV
www.ck-electrical.com
141Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]
DDS523 Single Phase Energy MeterDDS523 Single Phase Energy MeterDDS523 Single Phase Energy MeterDDS523 Single Phase Energy MeterDDS523 Single Phase Energy Meter
Made with advanced technique by adopting large scale integrated circuit and highly
reliable stepping motors etc. DDS523 single-phase electronic energy meters are the
newest power counting products in our country to measure single phase AD active en-
ergy with the rated voltage of 220V and the rated frequency of 50Hz. This kind of prod-
ucts can precisely measure active energy both in positive and negative directions. It
order to monitor and control active energy easily, it adopts testing signals with light-
coupled output and light diodes to indicate the used power capacity. Its technical proper-
ties comform to IEC60521 standard.
Application
• High accuracy: Tolerance � ±1%
• High sensitivity: Starting current < 0.4% Ib
• Broad load: Current overloaded multiple > 6 times
• Low power consumption: Meter self-consumption < 0.4W
• High reliability: MTBF > 1/10 mil.hr.
• Light weight: < 0.5kg
Dimension
Specifications
Accuracy
(Class)
1.0
Connection
Mode
Direct Input
Meter Constant
imp/kw.h
6400, 3200,
1600, 800
Rated
Voltage (V)
220
Rated Current (A)
2.5(10), 5(20),
10(40), 20(80)
Type
DDS523
DDS523
At using the meters, customers can get signal samples through enlargement,
multiplication, integral, V/F exchange and divided frequent power on the divided current
and divided voltage meters to drive stepping motors and counters add up energy degrees.
Working Principles
www.ck-electrical.com
142Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]
DTSY523 Three Phase Electronic Prepaid Type Energy MeterDTSY523 Three Phase Electronic Prepaid Type Energy MeterDTSY523 Three Phase Electronic Prepaid Type Energy MeterDTSY523 Three Phase Electronic Prepaid Type Energy MeterDTSY523 Three Phase Electronic Prepaid Type Energy Meter
DT86 Three Phase Energy MeterDT86 Three Phase Energy MeterDT86 Three Phase Energy MeterDT86 Three Phase Energy MeterDT86 Three Phase Energy Meter
DT862-4 three phase energy meter and reactive energy meter are induction meters
which are applicable to measure the rated frequency 50Hz and power loss of active
energy meter completely conform to IEC60521.
Application
Specifications
Dimension
DTSY523 (IC card) three phase electronic repaid type energy meter is the new genera-
tion intelligent meter with advanced static integrated technology and SMT craft. Its per-
formance accords with class 1.0 three phase electrical meter of IEC60521. They feature
advanced principle, compact structure, high accuracy and sensitivity, well reliability, long
service life, anti-power theft, strong overload, IC card prepaid, alarming of remainder
charge, storing date for over 10 years, setting secret multi-grade and so on.
Application
DimensionDTSY523
DT86
Rated Voltage
(V)
3x380/220
Type
DT862
Accuracy
(Class)
2.0
DT864 1.0
Connection Mode
Input through current
mutual inductor
Directly input
Input through current
mutual inductor
Rated Current
(A)
3x1(2),3x3(6),3x1.5(6)
3x1(2),3x3(6),3x1.5(6)
3x5(20),3x10(40),3x15(60),3x20
(80),3x30(100)
www.ck-electrical.com
143Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]
DDSY523 Electronic Single Phase Energy MeterDDSY523 Electronic Single Phase Energy MeterDDSY523 Electronic Single Phase Energy MeterDDSY523 Electronic Single Phase Energy MeterDDSY523 Electronic Single Phase Energy Meter
DDSY523 adopts large scale special logical circuit and is provided advanced selling
electricity appliance and software. It can calculate AC single phase active energy with
the rated voltage of 220V and the rated frequency of 50Hz. It has various functions of
energy account, load control and customer’ information management,etc. It is an ideal
product to reform the system of using electricity at present, to realize electric energy
commercialization, to solve the problem to collect fees and to carry out actual time moni-
tor and control in using electricity and adjusting the loading state of the electrical net.
Application
SpecificationsDDSY523
Accuracy Rate
Basic Current
Environment temperature
Data Protection
Time accuracy at the beginning
Class 1.0 or Class 2.0
5(20)A or 10(40)A
-25~45˚C, � 85%RH
Time to be preserved after power shutdown � 10 yeas
� 0.5S/d
Dimension
DTS523
Type
DTS523-4
Accuracy
1.0
Manner
Direct Connection
Rated Voltage (V)
3 x 380/220
DTS523 Three Phase Active Energy MeterDTS523 Three Phase Active Energy MeterDTS523 Three Phase Active Energy MeterDTS523 Three Phase Active Energy MeterDTS523 Three Phase Active Energy Meter
It is the new generation intelligent energy meter which adopts advanced static inte-grated technology and SMT craft. The products accord with class 1.0 static AC activethe phase energy meter of IEC1063 standard as well. It has the feature of advancedprincipal, simple structure, high accuracy and sensitivity, high reliability, anti-power theft,strong overload and so on.
Application
Dimension
Specifications
Rated Current (A)
3 x 2.5(10) 3 x 5(20)
3 x 10(40) 3 x 15(60)
3 x 20(80)
3 x 1.5(6)
3 x 3(6)DTS523-2 1.0
Connection With CT
Connection With CT3 x 380/220
www.ck-electrical.com
144Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]
MultitesterMultitesterMultitesterMultitesterMultitester
DT920B SP-110 MG28 YX-360 TRN YX-360 TRES
DT266 DT830 DT803B DT890D SP15D
YX1000A EC/1000 YX2000A YX360TRD DT810B
DT810D DT831 DT830B DT820C DT820D
www.ck-electrical.com
145Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]
ECS820B ECS820C ECS820D EC820DL(BL) DT830A
ThermostatThermostatThermostatThermostatThermostat
WZA-X KSD-304 SRT1150JSRT1180J
WZA-SJWZA-RF12WZA-BWZA-D
www.ck-electrical.com
146Tel:0086-577-88999052 Fax:0086-577-88999161 E-mail:[email protected]